De l'avion plus ??lectrique ?? l'avion tout ??lectrique : ??tat de l'art et prospective
sur les r??seaux de bord, J3eA, vol.4, p.1, 2005. ,
DOI : 10.1051/bib-j3ea:2005601
The more electric aircraft: Why aerospace needs power electronics?, Proc. of the 13th Conf. on Power Electronics and Applications, pp.1-30, 2009. ,
Force equalization for active/active redundant actuation system involving servohydraulic and electro-mechanical technologies ,
DOI : 10.1177/0954410013504343
The role of electric machines and drives in the more electric aircraft, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., pp.11-15, 2003. ,
DOI : 10.1109/IEMDC.2003.1211236
More Electricity in the Air: Toward Optimized Electrical Networks Embedded in More-Electrical Aircraft, IEEE Industrial Electronics Magazine, vol.6, issue.4, pp.6-17, 2012. ,
DOI : 10.1109/MIE.2012.2221355
Electro-hydraulic actuation of primary flight control surfaces, IEE Colloquium on All Electric Aircraft, pp.3-4, 1998. ,
DOI : 10.1049/ic:19980341
A380:'More Electric'Aircraft, Avionics Magazine, vol.25, pp.44-48, 2001. ,
A collaborative approach to the More Electric Aircraft, International Conference on Power Electronics Machines and Drives, pp.223-228, 2002. ,
DOI : 10.1049/cp:20020118
Airbus, A380 Flight Controls Overview, 2007. ,
The A380 flight control electrohydrostatic actuators, achievements and lessons learnt, 25th Congress of the International Council of the Aeronautical Sciences (ICAS), p.1, 2006. ,
Reliable electro-mechanical actuators in aircraft Aerospace and Electronic Systems Magazine, IEEE, vol.23, pp.19-25, 2008. ,
DOI : 10.1109/maes.2008.4607895
Fault-Tolerant Design Considerations and Control Strategies for Aerospace Drives, IEEE Transactions on Industrial Electronics, vol.59, issue.5, pp.2049-2058, 2012. ,
DOI : 10.1109/TIE.2011.2159356
Integration and control of electromechanical and electrohydraulic actuators in a hybrid primary flight control architecture, International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC) ,
Contribution au de veloppement d'actionneurs plus e lectriques: mode lisation inverse et composants me caniques spe cifiques a une application ae ronautique, 2006. ,
Ge ne rateurs de forces statiques et dynamiques a haute puissance en technologie e lectrome canique, INSA Toulouse, 2007. ,
Review of Thrust Reverser Mechanism used in Turbofan Jet Engine Aircraft, International Journal of Engineering, vol.6, pp.717-726, 2013. ,
Parallel positioning of twin EMAs for Fault-Tolerant flap applications, 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion, pp.1-6, 2012. ,
DOI : 10.1109/ESARS.2012.6387469
Advanced high lift system architecture with distributed electrical flap actuation, Workshop on Aviation System Technology (AST), 2009. ,
Tiltrotor progress, Aircraft Engineering and Aerospace Technology, vol.71, issue.1, pp.42-47, 1999. ,
DOI : 10.1108/00022669910252169
Optimal tiltrotor aircraft operations during power failure, 1999. ,
An experimental study of the dual-loop control of electro-hydraulic load simulator (EHLS), Chinese Journal of Aeronautics, vol.26, issue.6, pp.1586-1595, 2013. ,
DOI : 10.1016/j.cja.2013.10.002
Gas Turbine Propulsion Systems, 2011. ,
Fault Tolerant Electromechanical Actuators for Aircraft, 2010. ,
Innovative Approaches to Electromechanical Flight Control Actuators and Systems, International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC), pp.17-23, 2010. ,
New Actuators for Aircraft, Space and Military Applications, Proceedings of ACTUATOR 2010, 12th International Conference on New Actuators, pp.324-330, 2010. ,
Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload, Simulation Modelling Practice and Theory, vol.63, pp.58-82, 2016. ,
DOI : 10.1016/j.simpat.2016.01.005
Best practices in system?level virtual prototyping -application to mechanical References ,
Usefulness of a Force Feedback on Electromechanical Actuator, 6th International ESA Conference on Guidance, Navigation and Control Systems, 2005. ,
Preliminary design rules for electromechanical actuation systems -effects of saturation and compliances, 5th CEAS Air & Space Conference, 2015. ,
Towards trajectory prediction and optimization for energy efficiency of an aircraft with electrical and hydraulic actuation systems, 28th Congress of the International Council of the Aeronautical Sciences (ICAS), 2012. ,
PI controller relay auto-tuning using delay and phase margin in PMSM drives, Chinese Journal of Aeronautics, vol.27, issue.6, pp.1527-1537, 2014. ,
DOI : 10.1016/j.cja.2014.10.019
URL : http://doi.org/10.1016/j.cja.2014.10.019
Force equalization for active/active redundant actuation system involving servohydraulic and electro-mechanical technologies ,
DOI : 10.1177/0954410013504343
Ge ne rateurs de forces statiques et dynamiques a haute puissance en technologie e lectrome canique, INSA Toulouse, 2007. ,
Electric motor drives: modeling, analysis, and control, 2001. ,
Exlar Product Catalog, GSX Series Integrated Motor/Actuator [Online] Available: http://exlar.com/pdf, 2014. ,
Permanent magnet synchronous and brushless DC motor drives, 2010. ,
DOI : 10.1201/9781420014235
Electro hydraulic force generator for the certification of a thrust vector actuator, International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC), pp.59-64, 2001. ,
An electrical thrust vector control system with dynamic force feedback, International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC), pp.75-79, 2007. ,
Stability analysis using a coupled model of TVC actuator control loop and structural dynamics of a Launch Vehicle, 4th European Conference for Aerospace Sciences(EUCASS), 2010. ,
Transient Force Reduction in Electromechanical Actuators for Thrust-Vector Control, Journal of Propulsion and Power, vol.17, issue.1, pp.65-72, 2001. ,
DOI : 10.2514/2.5708
Assessment of technologies for noncryogenic hybrid electric propulsion, 2015. ,
Dynamic Heat Generation Modeling of High Performance Electromechanical Actuator, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010. ,
IGBT vs. Power MOSFET for switching applications [Online] Available: http://electronics.stackexchange.com/questions/68971/igbt-vs-power-mosfet-for-switching- applications-where-to-draw-the-line ,
Permanent magnet synchronous and brushless DC motor drives, 2010. ,
DOI : 10.1201/9781420014235
Electromagnetic Transients Simulation Models for Accurate Representation of Switching Losses and Thermal Performance in Power Electronic Systems, IEEE Transactions on Power Delivery, vol.20, issue.1, pp.319-327, 2005. ,
DOI : 10.1109/TPWRD.2004.839726
IGBT and PN junction diode loss modeling for system simulations hard-switched IGBT-inverters, IEEE International Conference on Electric Machines and Drives Industry Applications Conference Thirty-First IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE, pp.941-949, 1996. ,
DOI : 10.1109/iemdc.2005.195835
Available: http://www.powersystemsdesign.com/igbts- impact-efficiency-and-ruggedness-in-solar-inverter-apps [9] EDV-255 Electronic Devices of Diode ,
Real-Time Digital Hardware Simulation of Power Electronics and Drives, IEEE Transactions on, vol.22, pp.1235-1246, 2007. ,
DOI : 10.1109/tpwrd.2007.893620
AMESim electrical static conversion library,rev.13, 2014. ,
Switching characteristics of SiC Schottky diodes in a buck DC-DC converter, Proceedings in. Electronic and Communications Engineering Conference, 2006. ,
Switching loss analysis of modulation methods used in cascaded H-bridge multilevel converters, 2008 IEEE Power Electronics Specialists Conference, pp.4662-4668, 2008. ,
DOI : 10.1109/PESC.2008.4592703
Prediction of switching loss variations by averaged switch modeling, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058), pp.242-248, 2000. ,
DOI : 10.1109/APEC.2000.826111
Simulation with ideal switch models combined with measured loss data provides a good estimate of power loss, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129), pp.2915-2922, 2000. ,
DOI : 10.1109/IAS.2000.882580
IGBT Power Losses Calculation Using the Data-Sheet Parameters, 2009. ,
FPGA-based real-time emulation of power electronic systems with detailed representation of device characteristics, Power and Energy Society General Meeting, pp.1-11, 2011. ,
Iron loss and eddy-current loss analysis in a low-power BLDC motor with magnet segmentation, Archives of Electrical Engineering, vol.61, issue.1, pp.33-46, 2012. ,
DOI : 10.2478/v10171-012-0003-5
Saturation effects in small brushless DC motors. A simplified approach, 6th International Conference on Power Electronics and Variable Speed Drives, pp.99-102, 1996. ,
DOI : 10.1049/cp:19960895
Preliminary design rules for electromechanical actuation systems -effects of saturation and compliances, 5th CEAS Air & Space Conference, 2015. ,
A force equalization controller for active/active redundant actuation system involving servo-hydraulic and electro-mechanical technologies, Proceedings of the Institution of Mechanical Engineers, pp.1768-1787, 2014. ,
DOI : 10.1177/0954410013504343
Lessons in electric circuits; Volume II, 2006. ,
Electro-hydraulic actuation of primary flight control surfaces, IEE Colloquium on All Electric Aircraft, pp.3-4, 1998. ,
DOI : 10.1049/ic:19980341
Analysis of electric machinery and drive systems, 2013. ,
DOI : 10.1109/9780470544167
Friction modelling and simulation at system level: a practical view for the designer, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, pp.728-741, 2012. ,
DOI : 10.1177/0959651812441749
Friction modelling and simulation at system level: Considerations to load and temperature effects, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol.107, issue.1, pp.27-48, 2015. ,
DOI : 10.1177/0959651814548440
PI controller relay auto-tuning using delay and phase margin in PMSM drives, Chinese Journal of Aeronautics, vol.27, issue.6, pp.1527-1537, 2014. ,
DOI : 10.1016/j.cja.2014.10.019
URL : http://doi.org/10.1016/j.cja.2014.10.019
Electric motor drives: modeling, analysis, and control, 2001. ,
A method to improve the accuracy of synchronous control systems, Industrial Informatics (INDIN), 2013 11th IEEE International Conference on, pp.188-193, 2013. ,
BLDC Motor Modelling and Control-A Matlab®/Simulink® Implementation, 2005. ,
Advantages of Roller Screw Technology [Online] Available: http://exlar.com/why- exlar/many-advantages-roller-screw ,
Application characterization of IGBTs: International rectifier application note-AN-983, International Rectifier Inc, p.2012 ,
Application characterization of IGBTs: International rectifier application note-AN- 990, International Rectifier Inc, p.2012 ,
Roller Screw Technology ,
Advantages of Roller Screw Technology [Online] Available: http://exlar.com/why- exlar/many-advantages-roller-screw ,
Ball Screws for the More Electric Aircraft, presented at the International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC), 2004. ,
Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload Simulation Modelling Practice and Theory, 2016. ,
Friction modelling and simulation at system level: a practical view for the designer, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, pp.728-741, 2012. ,
DOI : 10.1177/0959651812441749
Friction modelling and simulation at system level: Considerations to load and temperature effects, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol.107, issue.1, pp.27-48, 2015. ,
DOI : 10.1177/0959651814548440
Modelling and simulation of mechanical transmission in roller???screw electromechanical actuators, Aircraft Engineering and Aerospace Technology, vol.81, issue.4, pp.288-298, 2009. ,
DOI : 10.1108/17488840610675546
Preliminary design rules for electromechanical actuation systems -effects of saturation and compliances, 5th CEAS Air & Space Conference, 2015. ,
Reliable electro-mechanical actuators in aircraft Aerospace and Electronic Systems Magazine, IEEE, vol.23, pp.19-25, 2008. ,
DOI : 10.1109/maes.2008.4607895
An integrated methodology for the preliminary design of highly reliable electromechanical actuators: Search for architecture solutions, Aerospace Science and Technology, vol.22, issue.1, pp.9-18, 2012. ,
DOI : 10.1016/j.ast.2011.05.010
Airbus-EMAs for flight controls actuation system-perspectives, presented at the International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC), 2010. ,
DOI : 10.4271/2011-01-2732
Controlling mechanical systems with backlash???a survey, Automatica, vol.38, issue.10, pp.1633-1649, 2002. ,
DOI : 10.1016/S0005-1098(02)00047-X
Estimation of backlash phenomenon in the electromechanical actuator, Control Engineering Practice, vol.13, issue.8, pp.973-983, 2005. ,
DOI : 10.1016/j.conengprac.2004.10.016
Inner-Loop Control for Electro-Hydraulic Actuation Systems, Journal of Dynamic Systems, Measurement, and Control, vol.134, issue.1, pp.14501-014501, 2011. ,
DOI : 10.1115/1.4001338
2-D lumped paramaters modelling of EMAs for advanced virtual prototyping, International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC), pp.122-127 ,
Coupling mechanical and thermal lumped parameters models for the preliminary design of power transmissions driven by thermal issues, 28th International Congress on Aerospace Sciences (ICAS), pp.2012-3690 ,
Ball and roller bearing engineering, Philadelphia: SKF Industries Inc, vol.1, 1959. ,
Ball and Roller Bearings: Theory, design, and application, 1999. ,
Available: http://www.koyo.eu/en/products.html [22] NTN, 2009. ,
Essential concepts of bearing technology: rolling bearing analysis, 2006. ,
AMESim powertrain library, rev.13, 2014. ,
Exlar Product Catalog, GSX Series Integrated Motor/Actuator [Online] Available: http://exlar.com/pdf, 2014. ,
A force equalization controller for active/active redundant actuation system involving servo-hydraulic and electro-mechanical technologies, Proceedings of the Institution of Mechanical Engineers, p.pp ,
DOI : 10.1177/0954410013504343
Ge ne rateurs de forces statiques et dynamiques a haute puissance en technologie e lectrome canique, INSA Toulouse, 2007. ,
Advantages of Roller Screw Technology [Online] Available: http://exlar.com/why- exlar/many-advantages-roller-screw ,
Using Speedgoat Target Computer Hardware for Simulink Real-Time ,
A 2-dimensional feedback control system, Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry, pp.55-61, 1957. ,
DOI : 10.1109/TAI.1957.6367203
Coordinated Position Control of Multi-Axis Mechanical Systems, Journal of Dynamic Systems, Measurement, and Control, vol.120, issue.3, pp.389-393, 1998. ,
DOI : 10.1115/1.2805413
Modeling and Control of Twin Parallel-Axis Linear Servo Mechanisms for High-Speed Machine Tools, International Journal of Automation and Smart Technology, vol.1, issue.1, pp.77-85, 2011. ,
DOI : 10.5875/ausmt.v1i1.72
Cross-coupled approach synchronization controller design method based on quantitative feedback theory for dual hydraulic motors driven flight simulators, 2010 International Conference On Computer Design and Applications, pp.3-376, 2010. ,
DOI : 10.1109/ICCDA.2010.5541243
A method to improve the accuracy of synchronous control systems, Industrial Informatics (INDIN), 2013 11th IEEE International Conference on, pp.188-193, 2013. ,
Optimal Cross-Coupled Synchronization Control of a Precision Motion Stage Driven by Dual Linear Motors, Intelligent Robotics and Applications, pp.365-374, 2013. ,
DOI : 10.1007/978-3-642-40849-6_36
Servo design of a vertical axis drive using dual linear motors for high speed electric discharge machining, International Journal of Machine Tools and Manufacture, vol.47, issue.3-4, pp.546-554, 2007. ,
DOI : 10.1016/j.ijmachtools.2006.05.011
The identification and control of a twin linear servo system with mechanical coupling, 2003. ,
Optimal Cross-Coupled Synchronizing Control of Dual-Drive Gantry System for a SMD Assembly Machine, JSME International Journal Series C, vol.47, issue.3, pp.939-945, 2004. ,
DOI : 10.1299/jsmec.47.939
A PD-like self-tuning fuzzy controller without steady-state error, Fuzzy Sets and Systems, vol.87, issue.2, pp.141-154, 1997. ,
DOI : 10.1016/S0165-0114(96)00022-X
Neural Network and Extended State Observer Based Sliding Mode Control of Electro-Hydrostatic Actuators, Modelling, Identification and Control / 834: Parallel and Distributed Computing and Networks / 835: Software Engineering, 2016. ,
DOI : 10.2316/P.2016.830-050
Fuzzy Controller Design for Positioning and Synchronization of Electrohydraulic System, 2007 2nd IEEE Conference on Industrial Electronics and Applications, 2007. ,
DOI : 10.1109/ICIEA.2007.4318552
Fuzzy controller design for synchronous motion in a dual-cylinder electro-hydraulic system, Control Engineering Practice, vol.16, issue.6, pp.658-673, 2008. ,
DOI : 10.1016/j.conengprac.2007.08.005
Synchronization Motion Control for Electro-hydraulic System of Tensioner for Pipelaying Vessel, 2009 Fifth International Conference on Natural Computation, pp.287-291, 2009. ,
DOI : 10.1109/ICNC.2009.155
Tuning PID controllers using the ITAE criterion, International Journal of Engineering Education, vol.21, pp.867-873, 2005. ,
Best practices in modelling and simulation applied to aerospace electromechanical actuators, Oral presentation in Siemens PLM LMS-2015- European Aerospace Engineering Conference, 2015. ,
Incremental Modelling and Simulation of Power Drive Electronics and Motor for Flight Control Electromechanical Actuators Application, Proceeding of IEEE International Conference on Mechatronics and Automation, pp.1319-1325, 2015. ,
Preliminary Design Rules for Electromechanical Actuation Systems ? Effects of Saturation and Compliances, Proceeding of 5th CEAS Air & Space Conference Challenges in European aerospace, pp.1-14, 2015. ,
Neural Network and Extended State Observer Based Sliding Mode Control of Electro-Hydrostatic Actuators, Proceeding of The 35th IASTED International Conference on Modelling, Identification and Control, pp.145-152, 2016. ,
Radial Basis Function Neural Network and Extended State Observer Based Sliding Mode Control of Electro Hydrostatic Actuators (EHA), Proceeding of 7th International Conference on Recent Advances in Aerospace Actuation Systems and Components (R3ASC'16), pp.75-81, 2016. ,
Bond Graph Aided Architecting of Models for Virtual Prototyping: Application to the Mechanical Power Transmission of Aerospace Electromechanical Actuators, 12th International Conference on Bond Graph Modeling, pp.17-24, 2016. ,
Incremental Modeling and Simulation of Mechanical Power Transmission for More Electric Aircraft Flight Control Electromechanical Actuation System Application, ASME International Mechanical Engineering Congress & Exposition, pp.2016-66436, 2016. ,
Determination of Paris' Law Constants and Crack Length Evolution via Extended and Unscented Kalman filter: An Application to Aircraft Fuselage Panels, Mechanical System and Signal Processing, vol.80, pp.266-281, 2016. ,
Modeling and Simulation of Flight Control Electromechanical Actuators with Special Focus on Models' Architecting, Multidisciplinary Effects and Power Flows, Chinese Journal of Aeronautics ,
Permanent magnet synchronous and brushless DC motor drives, SKF General Catalogue, 2006. ,