Displacement controlled fatigue crack growth in inelastic notch fields : implications for short cracks. Engng Fracture Mech, pp.2-279, 1985. ,
DOI : 10.1016/s0013-7944(85)80030-8
Fatigue growth analysis of interacting and coalescing surface defects, International Journal of Fracture, pp.283-299, 1997. ,
Fatigue damage initiation and growth from artificial defects in Zr-based metallic glass, Acta Materialia, vol.56, issue.13, pp.2955-65, 2008. ,
DOI : 10.1016/j.actamat.2008.02.029
THE BEHAVIOUR OF SHORT FATIGUE CRACKS AND THEIR INITIATION PART I?A REVIEW OF TWO RECENT BOOKS, Fatigue & Fracture of Engineering Materials and Structures, vol.10, issue.1, pp.1-75, 1987. ,
DOI : 10.1111/j.1460-2695.1987.tb01150.x
A CRITICAL STUDY OF THE CRACK CLOSURE EFFECT ON NEAR-THRESHOLD FATIGUE CRACK GROWTH, Fatigue & Fracture of Engineering Materials and Structures, vol.13, issue.3, pp.4-359, 1983. ,
DOI : 10.1007/BF00038901
Effects of small defects on fatigue strength of metals, International Journal of Fatigue, vol.2, issue.1, pp.23-30, 1980. ,
DOI : 10.1016/0142-1123(80)90024-9
Effects of small defects and non-metallic inclusions, 2002. ,
Surface defect tolerance of a cast TiAl alloy in fatigue, Scripta Materialia, vol.45, issue.7, pp.787-792, 2001. ,
DOI : 10.1016/S1359-6462(01)01097-1
Prediction of fatigue performance in gas turbine blades after foreign object damage, International Journal of Fatigue, vol.25, issue.9-11, pp.963-969, 2003. ,
DOI : 10.1016/S0142-1123(03)00160-9
Prediction of the combined high- and low-cycle fatigue performance of gas turbine blades after foreign object damage, International Journal of Fatigue, vol.29, issue.1, pp.69-80, 2007. ,
DOI : 10.1016/j.ijfatigue.2006.02.042
On the application of the Kitagawa?Takahashi diagram to foreign-object damage and highcycle fatigue, Engineering Fracture Mechanics, pp.1425-1446, 2002. ,
Short fatigue crack behavior in relation to three-dimensional aspects and crack closure effect, « Small fatigue cracks, 1988. ,
Crack closure effect on crack growth rate at 650°C in double notched specimens of a nickel base superalloy ,
Propagation de petites fissures de fatigue dans les zones de concentration de contraintes dans le superalliage N18 Ecole des Mines de Growth of short fatigue cracks from stress concentrations in N18 superalloy, Thèse de doctorat, pp.287-296, 2000. ,
Fatigue crack growth at stress concentrations???the role of notch plasticity and crack closure, Engineering Fracture Mechanics, vol.29, issue.3, pp.3-301, 1988. ,
DOI : 10.1016/0013-7944(88)90019-7
Fatigue crack initiation and propagation from hole defects, Experimental Mechanics, pp.161-166, 1997. ,
Propagation of short fatigue cracks, Int. Metals Reviews, vol.29, issue.n°6, pp.445-476, 1984. ,
DOI : 10.1179/imtr.1984.29.1.445
Fatigue of materials (first publication), 1991. ,
Behaviour of small cracks during their propagation from Vickers indentations in coarse-grain steel: An experimental investigation, International Journal of Fatigue, vol.33, issue.12, pp.1505-1513, 2011. ,
DOI : 10.1016/j.ijfatigue.2011.06.008
SMALL CRACK GROWTH AND FATIGUE LIFE PREDICTIONS FOR HIGH-STRENGTH ALUMINIUM ALLOYS: PART I-EXPERIMENTAL AND FRACTURE MECHANICS ANALYSIS, Fatigue & Fracture of Engineering Materials & Structures, vol.1, issue.11, pp.1289-1306, 1998. ,
DOI : 10.1046/j.1460-2695.1998.00080.x
Hardness environments around fatigued scratches in clad and unclad 2024 T351 aluminium alloy, Materials Science and Engineering: A, vol.500, issue.1-2, pp.16-24, 2009. ,
DOI : 10.1016/j.msea.2008.09.039
In-situ SEM study of fatigue crack growth behaviour in IN718, International Journal of Fatigue, vol.26, issue.3, pp.211-219, 2004. ,
DOI : 10.1016/S0142-1123(03)00172-5
Delta phase precipitation in Inconel 718, Materials Characterization, vol.53, issue.1, pp.7-16, 2004. ,
DOI : 10.1016/j.matchar.2004.07.004
On the dual slope Coffin- Manson relationship during low cycle fatigue on Ni-base allor IN718, Scripta Materiala, pp.411-415, 1997. ,
Surface effects on low cycle fatigue behaviour in IN718 alloy, TMS. Seven Springs, 2008. ,
DOI : 10.7449/2008/superalloys_2008_417_423
Fatigue crack growth resistant microstructures in polycrystalline Ni-base superalloys for aeroengines, International Journal of Fatigue, vol.21, issue.4, pp.393-405, 1999. ,
DOI : 10.1016/S0142-1123(98)00087-5
Origines des variations de propriétés mécaniques de l'alliage Inconel 718DA en relation avec ses caractéristiques microstructurales, 2010. ,
Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques, Acta Materialia, vol.59, issue.12, pp.4825-4859, 2011. ,
DOI : 10.1016/j.actamat.2011.04.025
Fatigue behaviour of two nickel-base alloys I: Experimental results on low cycle fatigue, fatigue crack propagation and substructures, Materials Science and Engineering, vol.55, issue.2, pp.157-171, 1982. ,
DOI : 10.1016/0025-5416(82)90129-X
Short crack initiation and growth at 600°C in notched specimens in Inconel 718, Materials Science and Engineering A, pp.139-154, 2003. ,
Morphology of ?' and ?'' precipitates and thermal stability of Inconel 718 type alloys, Metallurgical Transactions, pp.47-59, 1973. ,
Microstructural characterization and elemental partitioning in a direct-aged superalloy (DA 718), Materials Science and Engineering, vol.92, pp.159-171, 1987. ,
DOI : 10.1016/0025-5416(87)90166-2
An investigation of the creep-fatigue-environment interaction in a Ni-base superalloy. Fatigue and Fracture of engineering materials and structures, pp.401-412, 1980. ,
The effect of different profiling techniques on the fatigue performance of metallic membranes of AISI 301 and Inconel 718, International Journal of Fatigue, pp.487-501, 1997. ,
Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000, Acta Materialia, vol.61, issue.7, pp.2548-59, 2013. ,
DOI : 10.1016/j.actamat.2013.01.031
Low cycle fatigue behavior of Inconel 718 at 298K and 823K, Metallurgical Transactions A, pp.1095-1105, 1977. ,
Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges, Mechanics of Materials, vol.55, pp.130-145, 2012. ,
DOI : 10.1016/j.mechmat.2012.08.007
Mechanisms of White Layer Generation With Reference to Machining and Deformation Processes, Journal of Tribology, vol.109, issue.3, pp.525-531, 1987. ,
DOI : 10.1115/1.3261495
Developpement of damage tolerant Inco 718 for high temperature usage, pp.706-509, 1994. ,
Investigation into the characteristics of white layers produced in a nickel based superalloy from drilling operation, st CIRP Conference on Surface Integrity ? Procedia Engineering, pp.138-143, 2011. ,
Amorçage de fissures en fatigue oligocyclique sous chargement multiaxial Ecole des Mines de Paris Quantification of plastic strain of stainless steel and nickel alloy by electron backscatter diffraction, Thèse de doctorat, pp.539-548, 1983. ,
Effect of tool profile and fatigue loading on the local hardnesse around scratches in clad and unclad aluminium alloy 2024, Materials Science and Engineering, pp.297-304, 2009. ,
Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches, Acta Materialia, vol.59, issue.20, pp.7508-7520, 2011. ,
DOI : 10.1016/j.actamat.2011.08.034
The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress, Journal of Materials Processing Technology, vol.209, issue.8, pp.68-77, 2009. ,
DOI : 10.1016/j.jmatprotec.2008.09.014
Relationship between EDM parameters and surface crack formation, Journal of Materials Processing Technology, vol.142, issue.3, pp.676-683, 2003. ,
DOI : 10.1016/S0924-0136(03)00688-5
Rôle de l'usinage sur la tenue à la fatigue des composants mécaniques, Proc. 22 ème Journées de Printemps, pp.1-15, 2003. ,
FATIGUE CRACK GROWTH IN NICKEL-BASED SUPERALLOYS AT 500-700??C. II: DIRECT-AGED ALLOY 718, Fatigue & Fracture of Engineering Materials & Structures, vol.2, issue.3, pp.313-325, 1994. ,
DOI : 10.1111/j.1460-2695.1994.tb00232.x
Impact of thermal aging on the microstructure evolutions and mechanical properties of DA718 alloy Micromechanisms of fatigue crack growth in a forged Inconel 718 nickel based superalloy, Materials Science and Engineering A, pp.308-322, 1999. ,
Nickel Based Alloy Intergranular Embrittlement in Relation with Oxidation Mechanisms, Materials Science Forum, vol.251, issue.254, pp.445-452, 1997. ,
DOI : 10.4028/www.scientific.net/MSF.251-254.445
Fatigue crack growth in polycrystalline IN 718 superalloy, Materials Science and Engineering: A, vol.356, issue.1-2, pp.425-433, 2003. ,
DOI : 10.1016/S0921-5093(03)00156-4
Mechanical and thermal response of a nickel base superalloy upon grinding with high removal rates, Materials Science and Engineering, pp.357-366, 1997. ,
The effect of microstructure and environment on the crack growth behaviour of Inconel 718 alloy at 650 ??C under fatigue, creep and combined loading, Materials Science and Engineering, vol.56, issue.2, pp.143-156, 1982. ,
DOI : 10.1016/0025-5416(82)90167-7
Propagation des fissures par fatigue à haute temperature dans l'Inconel 718 : effet de microstructures et de chargements complexes Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation, Thèse de doctorat, pp.1966-77, 2001. ,
Effect of frequency and orientation on fatigue crack growth behavior of forged turbine disc of IN 718 superalloy, Materials Science and Engineering: A, vol.544, pp.83-87, 2012. ,
DOI : 10.1016/j.msea.2012.02.088
Analysis of white layers formed in hard turning of AISI 52100 steel, Materials Science and Engineering: A, vol.390, issue.1-2, pp.88-97, 2005. ,
DOI : 10.1016/j.msea.2004.08.052
A finite element modeling approach to predicting white layer formation in nickel superalloys, CIRP Annals - Manufacturing Technology, vol.58, issue.1, pp.77-80, 2009. ,
DOI : 10.1016/j.cirp.2009.03.109
Superalloys II : High temperature materials for aerospace and industrial power, 1987. ,
Texture, residual strain, and plastic deformation around scratches in alloy 600 using synchrotron X-ray Laue micro-diffraction, Journal of Nuclear Materials, vol.374, issue.3, pp.482-487, 2008. ,
DOI : 10.1016/j.jnucmat.2007.10.015
Surface damage in electrodischarge machining, Materials Science and Technology, pp.1153-57, 1989. ,
The cyclic fatigue behavior of direct age 718 at 149, 315, 454 and 538??C, Materials Science and Engineering: A, vol.428, issue.1-2, pp.106-115, 2006. ,
DOI : 10.1016/j.msea.2006.04.091
Microstructural characterization of the white etching layer in nickel-based superalloy, Metallurgical and Materials Transactions A, pp.3813-3838, 2011. ,
Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD, Materials Characterization, vol.61, issue.10, pp.913-922, 2010. ,
DOI : 10.1016/j.matchar.2010.05.006
Hardness environments around fatigued scratches in clad and unclad 2024 T351 aluminium alloy, Materials Science and Engineering: A, vol.500, issue.1-2, pp.16-24, 2009. ,
DOI : 10.1016/j.msea.2008.09.039
Effects on dynamic and metadynamic recrystallization on microstructures of wrought IN-718 due to hot deformation, Materials Science and Engineering: A, vol.196, issue.1-2, pp.89-95, 1995. ,
DOI : 10.1016/0921-5093(94)09717-8
Analyse métallurgique fine d'un brut de forge en Inco 718DA, 2009. ,
The potential drop method for monitoring crack growth in real components subjected to combined fatigue and creep conditions: application of FE techniques for deriving calibration curves, International Journal of Pressure Vessels and Piping, vol.78, issue.11-12, pp.881-891, 2001. ,
DOI : 10.1016/S0308-0161(01)00103-X
An alternative method for crack interaction in NDE of multiple cracks by means of potential drop technique, NDT & E International, vol.37, issue.7, pp.539-544, 2004. ,
DOI : 10.1016/j.ndteint.2004.02.003
Analytic and analogue techniques for determining potential distributions around angled cracks, International Journal of Fracture, vol.23, issue.1, pp.3-12, 1988. ,
DOI : 10.1007/BF00017825
A comparison of theoretical and experimental methods of calibrating the electrical potential drop technique for crack length determination, International Journal of Fracture, vol.20, issue.2, pp.91-101, 1982. ,
DOI : 10.1007/BF01141259
Direct current potential difference correlation for open-hole, single-crack coupons, Engineering Fracture Mechanics, vol.99, 2012. ,
DOI : 10.1016/j.engfracmech.2012.11.019
Calibrating the electrical potential method for studying slow crack growth, Materials Research and Standards, pp.442-445, 1965. ,
Crack-growth monitoring: Optimisation of the electrical potential technique using an analogue method, International Journal of Fracture Mechanics, vol.7, issue.4, pp.462-467, 1971. ,
DOI : 10.1007/BF00189118
On the calibration of the electrical potential technique for monitoring crack growth using finite element methods, International Journal of Fracture, vol.63, issue.1, pp.47-55, 1979. ,
DOI : 10.1007/BF00115908
Etude de l'influence de la contrainte, du champ magnétique et de la température sur le pouvoir thermoélectrique des matériaux métalliques, 2008. ,
Application of induced current potential drop technique for measurements of cracks on internal wall of tube-shaped specimens, NDT & E International, vol.40, issue.7, pp.497-504, 2007. ,
DOI : 10.1016/j.ndteint.2007.04.004
Automated visualization of surface morphology of cracks by means of induced current potential drop technique, NDT & E International, vol.49, pp.83-89, 2012. ,
DOI : 10.1016/j.ndteint.2012.04.005
Application of the electrical potential method to crack length measurements using Johnson's formula, Journal of Testing and Evaluation, vol.3, pp.218-239, 1981. ,
Real-time measurement of shear fatigue crack propagation at high-temperature using the potential drop technique, Measurement, vol.41, issue.4, pp.424-432, 2008. ,
DOI : 10.1016/j.measurement.2007.01.003
A three-point electrical potential difference method for in situ monitoring of propagating mixed-mode cracks at high temperature, Measurement, vol.43, issue.7, pp.950-959, 2010. ,
DOI : 10.1016/j.measurement.2010.03.012
Advances in potential drop techniques for non destructing testing Imperial college London An approximate model for three-dimensional alternating current potential drop analyses using a commercial finite element code, NDT&E International, pp.134-140, 2009. ,
Electrolytic tank simulation of the potential drop technique for crack length determinations, International Journal of Fracture, vol.7, issue.4, pp.139-141, 1983. ,
DOI : 10.1007/BF00020701
Fractography and material science. ASTM, STP 733, ASTM, pp.202-223, 1981. ,
Transformation of defects into fatigue cracks; the role of Kt and defect scale on fatigue life of non-pristine components, Procedia Engineering, vol.2, issue.1, pp.667-677, 2010. ,
DOI : 10.1016/j.proeng.2010.03.072
An electric potential drop technique for characterizing part-through surface cracks, Journal of Nuclear Materials, vol.191, issue.194, pp.1038-1041, 1960. ,
DOI : 10.1016/0022-3115(92)90632-U
The potential drop method for monitoring crack growth in real components subjected to combined fatigue and creep conditions: application of FE techniques for deriving calibration curves, International Journal of Pressure Vessels and Piping, vol.78, issue.11-12, pp.881-891, 1973. ,
DOI : 10.1016/S0308-0161(01)00103-X
An empirical stress-intensity factor equation for the surface crack, Engineering Fracture Mechanics, vol.15, issue.1-2, pp.185-192, 1981. ,
DOI : 10.1016/0013-7944(81)90116-8
Aspects probabilistes et microstructuraux de l'amorçage des fissures de fatigue dans l'alliage INCO 718 Surface integrity when machining age hardened Inconel 718with coated carbide cutting tools, International Journal of Machine Tools & Manufacture, pp.1481-1491, 2004. ,
Delta phase precipitation in Inconel 718, Materials Characterization, vol.53, issue.1, pp.7-16, 2004. ,
DOI : 10.1016/j.matchar.2004.07.004
Residual Stress Effect on Fatigue Crack Growth of SENT Specimen, Damage and Fracture Mechanics, pp.367-373, 2009. ,
DOI : 10.1007/978-90-481-2669-9_39
The residual stress state due to a spherical hard-body impac, Mechanics of Materials, pp.441-454, 2001. ,
Mechanical relaxation of localized residual stresses associated with foreign object damage, Materials Science and Engineering: A, vol.349, issue.1-2, pp.48-58, 2003. ,
DOI : 10.1016/S0921-5093(02)00543-9
Relaxation of shot-peened residual stresses under creep loading, Scripta Materialia, pp.286-289, 2008. ,
The propagation of crack and the energy of elastic deformation. Transactions of the ASME, Series A-D, pp.1225-1230, 1958. ,
Precipitation and Residual Stress Relaxation Kinetics in Shot-Peened Inconel 718, Journal of Materials Engineering and Performance, vol.15, issue.5, pp.614-621, 2006. ,
DOI : 10.1361/105994906X124613
Thermomechanical relaxation of residual stress in shot peened nickel base superalloy, Materials Science and Technology, vol.447, issue.11, pp.947-54, 1994. ,
DOI : 10.1016/0029-5493(89)90088-5
Particle impact on metal substrates with application to foreign object damage, Journal of the Mechanics and Physics of Solids, pp.2669-2690, 2002. ,
DOI : 10.1016/s0022-5096(02)00022-4
Etude de l'influence d'une prédéformation plastique sur la tenue en fatigue d'un acier 23MCD5, ASCOMETALCREAS, 2005. ,
Fatigue crack growth from foreign object damage under combined low and high cycle loading. Part II: A two-parameter predictive approach, International Journal of Fatigue, vol.29, issue.7, pp.1350-1358, 2007. ,
DOI : 10.1016/j.ijfatigue.2006.10.014
Effetc of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defect, Materials Science and Engineering, pp.142-151, 2012. ,
Evaluation and analysis of residual stresses due to foreign object damage, Mechanics and Materials, pp.199-211, 2009. ,
The Significance of Fatigue Crack Closure, ASTM STP, vol.486, pp.230-242, 1971. ,
DOI : 10.1520/STP26680S
Stress Relaxation of shot peened Udimet 720Li under solely elevated temperature exposure and under isothermal fatigue, Metallurgical and Materials Transactions, pp.3041-53, 2005. ,
Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue, International Journal of Fatigue, vol.27, issue.10-12, pp.1530-1564, 2005. ,
DOI : 10.1016/j.ijfatigue.2005.07.027
Experimental evaluation of the effect of residual stress field on crack growth behaviour in C(T) specimen, Engineering Fracture Mechanics, vol.73, issue.13, pp.1772-1782, 2006. ,
DOI : 10.1016/j.engfracmech.2006.03.004
Determination of residual stresses by X-ray diffraction. Measurement good practice guide, p.52, 2005. ,
Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges, Mechanics of Materials, vol.55, pp.130-145, 2012. ,
DOI : 10.1016/j.mechmat.2012.08.007
Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000, Acta Materialia, vol.61, issue.7, pp.2548-59, 2013. ,
DOI : 10.1016/j.actamat.2013.01.031
On the calculation of stress intensity factors due to thermal and residual stress fields, CEGB Research Report NW, p.158, 1976. ,
Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches, Acta Materialia, vol.59, issue.20, pp.7508-7520, 2011. ,
DOI : 10.1016/j.actamat.2011.08.034
Experimental investigations and modelling of relaxation behaviour of shot peening residual stresses at high temperature for nickel base superalloys, Materials Science and Technology, vol.7, issue.4, pp.360-367, 1997. ,
DOI : 10.1051/jp3:1991160
Analysis of Fatigue Growth of Semi-Elliptical Cracks Through Residual Stress Fields, Proceedings of the sixth international fatigue congress, pp.1207-1212, 1996. ,
DOI : 10.1016/B978-008042268-8/50074-5
The effect of residual stress and its redistribution of fatigue crack growth, Theoretical and Applied Fracture Mechanics, vol.12, issue.1, pp.59-66, 1989. ,
DOI : 10.1016/0167-8442(89)90015-3
Predicting the effect of residual stress on fatigue crack growth, International Journal of Fatigue, vol.29, issue.3, pp.508-515, 2007. ,
DOI : 10.1016/j.ijfatigue.2006.05.008
Estimation of biaxial surface stress by instrumented indentation with sharp indenters, Acta Materialia, vol.52, issue.6, pp.1555-1563, 2004. ,
DOI : 10.1016/j.actamat.2003.12.006
Effects of redistributing residual stress on the fatigue behavior of ss330 weldment, International Journal of Fatigue, vol.20, issue.8, pp.565-573, 1998. ,
DOI : 10.1016/S0142-1123(98)00024-3
Residual stresses in face finish turning of high strength nickel-based superalloy, Journal of Materials Processing Technology, vol.209, issue.10, pp.4896-4902, 2009. ,
DOI : 10.1016/j.jmatprotec.2009.01.012
Effect of ring indentation on fatigue crack growth in an aluminium plate, International Journal of Fatigue, pp.1271-1277, 2003. ,
Influence of temperature and time on the stress relaxation process of shot peened IN100 superalloys, Materiaux et Techniques, pp.29-36, 1989. ,
Residual stress effects in fatigue, ASTM STP, vol.776, pp.172-94, 1982. ,
Prediction of fatigue performance in gas turbine blades after foreign object damage, International Journal of Fatigue, vol.25, issue.9-11, pp.963-969, 2003. ,
DOI : 10.1016/S0142-1123(03)00160-9
Prediction of the combined high- and low-cycle fatigue performance of gas turbine blades after foreign object damage, International Journal of Fatigue, vol.29, issue.1, pp.69-80, 2007. ,
DOI : 10.1016/j.ijfatigue.2006.02.042
Residual stress effects in fatigue. ASTM STP, 776, pp.13-31, 1982. ,
On the application of the Kitagawa?Takahashi diagram to foreign-object damage and highcycle fatigue, Engineering Fracture Mechanics, pp.1425-1446, 2002. ,
An empirical stress intensity factor set of equations for a semi-elliptical crack in a semi-infinite body subjected to a polynomial stress distribution., International Journal of Fatigue, vol.21, issue.3, pp.243-251, 1999. ,
DOI : 10.1016/S0142-1123(98)00074-7
The effect of cold work on the thermal stability of residual compression in surface enhanced IN718, ASM International. Proceedings of the 20th ASM Materials Solution Conference & Exposition, 2000. ,
FOD resistance and fatigue crack arrest in low plasticity burnished IN718, Proceedings 5 th National Turbine Engine High Cycle Fatigue Conference, 2000. ,
Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a Cut, Journal of Engineering Materials and Technology, vol.123, issue.2, pp.162-168, 2001. ,
DOI : 10.1115/1.1345526
An analysis of the residual stresses generated in Inconel 718TM when turning, Journal of Materials Processing Technology, pp.359-367, 2006. ,
Superalloys II : High temperature materials for aerospace and industrial power, 1987. ,
Retardation of fatigue crack propagation by indentation technique, International Journal of Pressure Vessels and Piping, vol.79, issue.11, pp.725-733, 2002. ,
DOI : 10.1016/S0308-0161(02)00096-0
A new method for estimating residual stresses by instrumented sharp indentation, Acta Materialia, vol.46, issue.16, pp.5755-5767, 1998. ,
DOI : 10.1016/S1359-6454(98)00226-2
A review of crack closure, fatigue crack threshold and related phenomenon, Mater Sci. Eng, pp.1-22, 1994. ,
Classification of fatigue crack growth behaviour, Metall. Mater Trans, pp.1221-1234, 1995. ,
Behaviour of small cracks during their propagation from Vickers indentations in coarse-grain steel: An experimental investigation, International Journal of Fatigue, vol.33, issue.12, pp.1505-1513, 2011. ,
DOI : 10.1016/j.ijfatigue.2011.06.008
Residual stress. Part 2 ??? Nature and origins, Materials Science and Technology, vol.90, issue.37, pp.366-375, 2001. ,
DOI : 10.1016/S1359-6454(99)00214-1
Hardness environments around fatigued scratches in clad and unclad 2024 T351 aluminium alloy, Materials Science and Engineering: A, vol.500, issue.1-2, pp.16-24, 2009. ,
DOI : 10.1016/j.msea.2008.09.039
A finite element study of thermal relaxation of residual stress in laser shock peened IN718 superalloy, International Journal of Impact Engineering, vol.38, issue.7, pp.590-596, 2011. ,
DOI : 10.1016/j.ijimpeng.2011.02.006
Investigation of residual stress relaxation under cyclic load, International Journal of Fatigue, vol.23, pp.31-37, 2001. ,
DOI : 10.1016/S0142-1123(01)00132-3