G. Lütjering, J. C. Williams, P. Lefranc, and E. Uta, Endommagement sous chargement cyclique avec temps de maintien de l'alliage de titane Ti-6242 -Rôle de l'hydrogène interne, Etude des hétérogénéités de texture et de microstructure au sein de disques forgés en IMI834 Influence sur les propriétés en fatigue-dwell, 2007.

H. Jousset, J. Da-costa, and T. T. Maki, Etude des Micromécanismes de Déformation d'un Alliage Ti-6Al-4V par Déformation MET in situ : Influence d'un Traitement de Surface INSA de Toulouse Microstructure et modélisation du comportement en fatigue uniaxiale et multiaxiale d'un alliage de titane biphasé The process of transition of the cubic body-centered modification into the hexagonal close-packed modification of zirconium Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation, Etude expérimentale et modélisation des évolutions microstructurales au cours des traitements thermiques post forgeage dans l'alliage de titane Ti17, pp.785-145, 1934.

D. Bhattacharyya, G. B. Viswanathan, R. Denkenberger, D. Furrer, and H. L. Fraser, The role of crystallographic and geometrical relationships between ?? and ?? phases in an ??/?? titanium alloy, Acta Materialia, vol.51, issue.16, pp.4679-4691, 2003.
DOI : 10.1016/S1359-6454(03)00179-4

L. Germain, Contribution à l'étude des hétérogénéités de texture des billettes d'IMI 834, 2005.

D. Bhattacharyya, G. B. Viswanathan, and H. L. Fraser, Crystallographic and morphological relationships between ?? phase and the Widmanst??tten and allotriomorphic ?? phase at special ?? grain boundaries in an ??/?? titanium alloy, Acta Materialia, vol.55, issue.20, pp.6765-6778, 2007.
DOI : 10.1016/j.actamat.2007.08.029

S. Lampman, Wrought Titanium and Titanium Alloys Volume 02 - Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook, pp.1782-1886, 1990.

N. E. Paton and M. W. Mahoney, Creep of titanium-silicon alloys, Metallurgical Transactions A, vol.6, issue.11, p.1685, 1976.
DOI : 10.1007/BF02817886

M. F. Savage, J. Tatalovich, and M. J. Mills, interface, Philosophical Magazine, vol.33, issue.11, pp.1127-1154, 2004.
DOI : 10.1016/S1359-6454(98)00364-4

URL : https://hal.archives-ouvertes.fr/hal-00401086

G. T. Gray, G. Lütjering, and J. C. Williams, The influence of oxygen on the structure, fracture, and fatigue crack propagation behaviour of Ti-8.6 wt.% Al, Int. J. Fatigue, vol.12, issue.4, p.301, 1990.

F. Sansoz and H. Ghonem, Effects of loading frequency on fatigue crack growth mechanisms in ??/?? Ti microstructure with large colony size, Materials Science and Engineering: A, vol.356, issue.1-2, pp.81-92, 2003.
DOI : 10.1016/S0921-5093(03)00112-6

C. Angelier, S. Bein, and J. Béchet, Building a continuous cooling transformation diagram of ??-CEZ alloy by metallography and electrical resistivity measurements, Metallurgical and Materials Transactions A, vol.34, issue.12, pp.2467-2475, 1997.
DOI : 10.1007/s11661-997-0004-y

G. Venkatramani, S. Ghosh, and M. J. Mills, A size-dependent crystal plasticity finite-element model for creep and load shedding in polycrystalline titanium alloys, Acta Materialia, vol.55, issue.11, pp.3971-3986, 2007.
DOI : 10.1016/j.actamat.2007.03.017

G. Lütjering, Influence of processing on microstructure and mechanical properties of (??+??) titanium alloys, Materials Science and Engineering: A, vol.243, issue.1-2, pp.32-45, 1998.
DOI : 10.1016/S0921-5093(97)00778-8

T. Furuhara, S. Takagi, H. Watanabe, and T. Maki, Crystallography of grain boundary ?? precipitates in a ?? titanium alloy, Metallurgical and Materials Transactions A, vol.33, issue.6, pp.1635-1646, 1996.
DOI : 10.1007/BF02649821

E. S. Fisher and C. J. Renken, Single-Crystal Elastic Moduli and the hcp ??? bcc Transformation in Ti, Zr, and Hf, Physical Review, vol.135, issue.2A, p.482, 1964.
DOI : 10.1103/PhysRev.135.A482

S. Ankem and H. Margolin, The role of elastic interaction stresses on the onset of plastic flow for oriented two ductile phase structures, Metallurgical Transactions A, vol.5, issue.6, pp.963-972, 1980.
DOI : 10.1007/BF02654710

H. Ledbetter, H. Ogi, S. Kai, S. Kim, and M. Hirao, Elastic constants of body-centered-cubic titanium monocrystals, Journal of Applied Physics, vol.95, issue.9, pp.4642-4644, 2004.
DOI : 10.1063/1.1688445

T. Duval, Analyse multi-échelles des relations microstructure/propriétés mécaniques sous sollicitation monotone et cyclique des alliages de titane beta-métastable, 2013.

G. Martin, L. Nazé, and G. Cailletaud, Numerical multi-scale simulations of the mechanical behavior of ??-metastable titanium alloys Ti5553 and Ti17, Procedia Engineering, vol.10, issue.0, pp.1803-1808, 2011.
DOI : 10.1016/j.proeng.2011.04.300

G. Martin, Simulation numérique multi-échelles du comportement mécanique des alliages de titane bêta-métastable Ti5553 et Ti17, 2012.

T. Duval, P. Villechaise, and S. Andrieu, Mechanical Properties and Strain Mechanisms Analysis in Ti-5553 Titanium Alloy, The Minerals, Metals & Materials Society (TMS), pp.471-478, 2011.
DOI : 10.1002/9781118062173.ch59

J. C. Williams, R. G. Baggerly, and N. E. Paton, Deformation behavior of HCP Ti-Al alloy single crystals, Metallurgical and Materials Transactions A, vol.245, issue.3, p.837, 2002.
DOI : 10.1007/s11661-002-0153-y

S. Zaefferer, A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture, Materials Science and Engineering: A, vol.344, issue.1-2, pp.20-30, 2003.
DOI : 10.1016/S0921-5093(02)00421-5

K. S. Chan, A micromechanical analysis of the yielding behavior of individual widmanst??tten colonies of an ?? + ?? titanium alloy, Metallurgical and Materials Transactions A, vol.174, issue.321, pp.3409-3422, 2004.
DOI : 10.1007/s11661-004-0177-6

F. Bridier, P. Villechaise, and J. Mendez, Analysis of the different slip systems activated by tension in a alpha / beta titanium alloy in relation with local crystallographic orientation, pp.555-567, 2005.

S. Naka, A. Lasalmonie, P. Costa, and L. P. Kubin, The low-temperature plastic deformation of alpha-titanium and the core structure of a-type screw dislocations

H. Conrad, Effect of interstitial solutes on the strength and ductility of titanium, Progress in Materials Science, vol.26, issue.2-4, pp.4-123, 1981.
DOI : 10.1016/0079-6425(81)90001-3

M. Anahid, M. K. Samal, and S. Ghosh, Dwell fatigue crack nucleation model based on crystal plasticity finite element simulations of polycrystalline titanium alloys, Journal of the Mechanics and Physics of Solids, vol.59, issue.10, pp.2157-2176, 2011.
DOI : 10.1016/j.jmps.2011.05.003

K. S. Chan, C. C. Wojcik, and D. A. Koss, Deformation of an alloy with a lamellar microstructure: experimental behavior of individual widmanstatten colonies of an ??-?? titanium alloy, Metallurgical Transactions A, vol.23, issue.11, pp.1899-1907, 1981.
DOI : 10.1007/BF02643801

S. Suri, G. B. Viswanathan, T. Neeraj, D. H. Hou, and M. J. Mills, Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an ??/?? titanium alloy, Acta Materialia, vol.47, issue.3, pp.1019-1034, 1999.
DOI : 10.1016/S1359-6454(98)00364-4

M. F. Savage, J. Tatalovich, K. J. Zupan, M. J. Hemker, and . Mills, Deformation mechanisms and microtensile behavior of single colony Ti???6242Si, Materials Science and Engineering: A, vol.319, issue.321, pp.319-321, 2001.
DOI : 10.1016/S0921-5093(01)01024-3

F. Bridier, Analyse expérimentale des modes de déformation et d'endommagement par fatigue à 20°C d'alliages de titane. Aspects cristallographiques à différentes échelles, 2006.

A. Ambard, L. Guétaz, F. Louchet, and D. Guichard, No Title, Mater. Sci. Eng. A, vol.319, p.404, 2001.

F. S. Lin, E. A. Starke, S. B. Chakrabortty, and A. Gysler, The effect of microstructure on the deformation modes and mechanical properties of Ti-6Al-2Nb-1Ta-0.8Mo: Part I. Widmanst??tten structures, Metallurgical Transactions A, vol.9, issue.6, pp.1229-1246, 1984.
DOI : 10.1007/BF02644717

A. L. Pilchak, R. E. Williams, and J. C. Williams, Crystallography of Fatigue Crack Initiation and Growth in Fully Lamellar Ti-6Al-4V, Metallurgical and Materials Transactions A, vol.72, issue.7, pp.106-124, 2010.
DOI : 10.1007/s11661-009-0064-2

U. Dahmen, . Orientation, . In, and . Systems, Orientation relationships in precipitation systems, Acta Metallurgica, vol.30, issue.1, pp.63-73, 1982.
DOI : 10.1016/0001-6160(82)90045-1

C. N. Reid, A. Gilbert, and G. T. Hahn, [No Title]., Transactions of the Faculty of Actuaries, vol.19, p.1975, 1966.
DOI : 10.1017/S0071368600003347

I. Gorgas, Slip line investigations in lithium at 162 K, Scripta Metallurgica, vol.20, issue.1, p.113, 1986.
DOI : 10.1016/0036-9748(86)90223-1

T. Neeraj and M. J. Mills, Short-range order (SRO) and its effect on the primary creep behavior of a Ti???6wt.%Al alloy, Materials Science and Engineering: A, vol.319, issue.321, 2001.
DOI : 10.1016/S0921-5093(01)01045-0

M. Zhang, F. Bridier, P. Villechaise, J. Mendez, and D. L. Mcdowell, Simulation of slip band evolution in duplex Ti ?, Acta Mater, vol.58, issue.3, pp.6-10, 2010.

T. Furuhara, T. Ogawa, and T. Maki, Atomic structure of interphase boundary of an a precipitate plate in a ?? Ti[sbnd]Cr alloy, Philosophical Magazine Letters, vol.41, issue.3, p.175, 1995.
DOI : 10.1080/09500839508242449

T. Furuhara, J. M. Howe, and H. I. Aaronson, Interphase boundary structures of intragranular proeutectoid ?? plates in a hypoeutectoid Ti???Cr alloy, Acta Metallurgica et Materialia, vol.39, issue.11, pp.2873-2886, 1991.
DOI : 10.1016/0956-7151(91)90104-9

S. Ankem and H. Margolin, Alpha-Beta Interface Sliding in Ti-Mn Alloys, Metallurgical Transactions A, vol.8, issue.2, pp.500-503, 1983.
DOI : 10.1007/BF02644228

P. Castany, J. Crestou, J. Douin, and A. Coujou, Experimental study of dislocation mobility in a Ti???6Al???4V alloy, Acta Materialia, vol.55, issue.18, pp.6284-6291, 2007.
DOI : 10.1016/j.actamat.2007.07.032

N. Escalé, Etude par Microscopie Electronique en Transmission des microstructures et des micromécanismes de déformation d'alliages de titane béta-métastables, 2012.

D. W. Hoeppner, Structural Integrity Design Paradigms in Engineering, USPE Annual Meeting, pp.1-22, 2006.
DOI : 10.1142/p531

J. F. Garvey, Safety Recommendation, A-98-27 through -33, 1998.

D. R. Hinson, Safety Recommendation, A-95-84 and -85, 1995.

J. E. Hall, AIRCRAFT ACCIDENT REPORT: Uncontained Engine Failure DELTA AIR LINES Flight 1288 MCDONNELL DOUGLAS MD-88, 1996.

P. Lefranc, C. Sarrazin-baudoux, and V. Doquet, Dwell-Fatigue Behaviour of a Beta-Forged Ti 6242 Alloy, pp.1-7
DOI : 10.1007/1-4020-4972-2_83

H. K. Adenstedt, Creep of titanium at room temperature, Met. Prog, vol.65, pp.658-660, 1949.

N. C. Odegard and A. W. Thompson, Low temperature creep of Ti-6 Al-4 V, Metallurgical Transactions, vol.20, issue.8, p.1207, 1974.
DOI : 10.1007/BF02644335

D. Eylon and J. A. Hall, Fatigue behavior of beta processed titanium alloy IMI 685, Metallurgical Transactions A, vol.4, issue.no. 1, pp.981-990, 1977.
DOI : 10.1007/BF02661583

W. J. Evans and C. R. Gostelow, The effect of hold time on the fatigue properties of a ??-processed titanium alloy, Metallurgical Transactions A, vol.5, issue.12, pp.1837-1846, 1979.
DOI : 10.1007/BF02811727

M. A. Imam and C. M. Gilmore, Room temperature creep of Ti-6AI-4V, Metallurgical Transactions A, vol.5, issue.no. 8, pp.419-425, 1979.
DOI : 10.1007/BF02697068

J. E. Hack and G. R. Leverant, The influence of microstructure on the susceptibility of titanium alloys to internal hydrogen embrittlement, Metallurgical Transactions A, vol.7, issue.10, pp.1729-1738, 1982.
DOI : 10.1007/BF02647828

W. H. Miller, R. T. Chen, and E. A. Starke, Microstructure, creep, and tensile deformation in Ti-6Al-2Nb-1Ta-0.8Mo, Metallurgical Transactions A, vol.24, issue.3, pp.1451-1468, 1987.
DOI : 10.1007/BF02646658

T. Neeraj, D. H. Hou, G. S. Daehn, and M. J. Mills, Phenomenological and microstructural analysis of room temperature creep in titanium alloys, Acta Materialia, vol.48, issue.6, pp.1225-1238, 2000.
DOI : 10.1016/S1359-6454(99)00426-7

A. K. Chakrabarti and E. S. Nichols, No Title, " in Titanium '80 -Science and Technology, p.1081, 1981.

F. Mcbagonluri and W. O. Soboyejo, Titanium Alloys, Advanced Structural Materials, T. S. Srivatsan, pp.359-400, 2006.
DOI : 10.1201/9781420017465.ch11

J. D. Destefani, Introduction to Titanium and Titanium Alloys, ASM Handbook, Volume 02 -Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, pp.1770-1782, 1990.

M. J. Donachie, Titanium : A Technical Guide 2nd edition, 2000.

M. R. Bache, A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions, International Journal of Fatigue, vol.25, issue.9-11, pp.1079-1087, 2003.
DOI : 10.1016/S0142-1123(03)00145-2

M. R. Winstone and M. J. Weaver, The strain controlled fatigue behaviour of a near-alpha titanium alloy, Proceedings of International Conference of Titanium, pp.2275-2280, 1984.

V. Sinha, M. J. Mills, and J. C. Williams, Understanding the contributions of normal-fatigue and static loading to the dwell fatigue in a near-alpha titanium alloy, Metallurgical and Materials Transactions A, vol.36, issue.10, pp.3141-3148, 2004.
DOI : 10.1007/s11661-004-0058-z

M. E. Kassner, Y. Kosaka, and J. A. Hall, Low-cycle dwell-time fatigue in Ti-6242, Metallurgical and Materials Transactions A, vol.19, issue.9, pp.2383-2389, 1999.
DOI : 10.1007/s11661-999-0246-y

M. R. Bache, M. Cope, and H. M. Davies, Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature, International Journal of Fatigue, vol.19, issue.93, pp.83-88, 1997.
DOI : 10.1016/S0142-1123(97)00020-0

S. H. Spence, W. J. Evans, and M. Cope, Dwell fatigue of a Ti-6246 at near ambient temperatures, ICF9, pp.1571-1578, 1997.

L. Coudreuse, A. Brass, and J. Chêne, Fragilisation des aciers par l'hydrogène : étude et prévention

L. Coudreuse, A. Brass, and J. Chêne, Fragilisation des aciers par l'hydrogène : mécanismes

J. Petit and A. Zeghloul, Influence de l'environnement et de la microstructure sur la propagation en fatigue des fissures courtes tridimensionnelles, Revue de Physique Appliqu??e, vol.24, issue.9, pp.905-913, 1989.
DOI : 10.1051/rphysap:01989002409090500

URL : https://hal.archives-ouvertes.fr/jpa-00246113

G. Henaff, K. Marchal, and J. Petit, On fatigue crack propagation enhancement by a gaseous atmosphere: Experimental and theoretical aspects, Acta Metallurgica et Materialia, vol.43, issue.8, pp.2931-2942, 1995.
DOI : 10.1016/0956-7151(95)00002-D

X. Demulsant and J. Mendez, Influence of environment on low cycle fatigue damage in Ti6Al4V and Ti 6246 titanium alloys, Materials Science and Engineering: A, vol.219, issue.1-2, pp.202-211, 1996.
DOI : 10.1016/S0921-5093(96)10426-3

A. L. Pilchak and J. C. Williams, Observations of Facet Formation in Near-?? Titanium and Comments on the Role of Hydrogen, Metallurgical and Materials Transactions A, vol.31, issue.4, pp.1000-1027, 2011.
DOI : 10.1007/s11661-010-0507-9

H. Hoeg, B. Hollund, and I. W. Hall, Effect of hydrogen on the fracture properties and microstructure of Ti-6Al-4V, Metal Science, vol.227, issue.2, pp.50-56, 1980.
DOI : 10.1016/0022-3115(74)90174-3

W. J. Evans and M. R. Bache, Hydrogen and fatigue behaviour in a near alpha titanium alloy, Scripta Metallurgica et Materialia, vol.32, issue.7, pp.1019-1024, 1995.
DOI : 10.1016/0956-716X(95)00068-7

W. J. Evans, Dwell-sensitive fatigue in a near alpha-titanium alloy, Journal of Materials Science Letters, vol.5, issue.5, pp.571-574, 1987.
DOI : 10.1007/BF01739287

D. S. Shih, I. M. Robertson, and H. K. Birnbaum, Hydrogen embrittlement of ?? titanium: In situ tem studies, Acta Metallurgica, vol.36, issue.1, pp.111-124, 1988.
DOI : 10.1016/0001-6160(88)90032-6

F. Mignot, Contributions de l'hydrogène interne et du fluage à froid à l'anomalie de fissuration sous chargement cyclique du Ti 6246 à fort Kmax, LMS, Ecole Polytechnique, 2003.

C. A. Stubbington, S. Pearson, . Of, . On, . Of et al., Effect of dwell on the growth of fatigue cracks in Ti-6Al-4V alloy bar, Engineering Fracture Mechanics, vol.10, issue.4, pp.723-756, 1978.
DOI : 10.1016/0013-7944(78)90030-9

C. A. Stubbington and S. Pearson, Effect of dwell on the growth of fatigue cracks in Ti-6Al-4V alloy bar, Engineering Fracture Mechanics, vol.10, issue.4, 1976.
DOI : 10.1016/0013-7944(78)90030-9

H. Ghonem, Microstructure and fatigue crack growth mechanisms in high temperature titanium alloys, International Journal of Fatigue, vol.32, issue.9, pp.1448-1460, 2010.
DOI : 10.1016/j.ijfatigue.2010.02.001

W. Shen, A. B. Soboyejo, and W. O. Soboyejo, Microstructural effects on fatigue and dwell-fatigue crack growth in ??/?? Ti-6Al-2Sn-4Zr-2Mo-0.1Si, Metallurgical and Materials Transactions A, vol.396, issue.5, pp.163-187, 2004.
DOI : 10.1007/s11661-004-0119-3

W. Shen, W. O. Soboyejo, and A. B. Soboyejo, An investigation on fatigue and dwell-fatigue crack growth in Ti???6Al???2Sn???4Zr???2Mo???0.1Si, Mechanics of Materials, vol.36, issue.1-2, pp.117-140, 2004.
DOI : 10.1016/S0167-6636(03)00035-8

S. Suri, T. Neeraj, G. S. Daehn, D. H. Hou, J. M. Scott et al., Mechanisms of primary creep in ??/?? titanium alloys at lower temperatures, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 1997.
DOI : 10.1016/S0921-5093(97)00322-5

D. Eylon, J. A. Hall, C. M. Pierce, and D. L. Ruckle, Microstructure and mechanical properties relationships in the Ti-11 alloy at room and elevated temperatures, Metallurgical Transactions A, vol.7, issue.1, pp.1817-1826, 1976.
DOI : 10.1007/BF02659811

K. S. Ravichandran, Near threshold fatigue crack growth behavior of a titanium alloy: Ti-6A1-4V, Acta Metallurgica et Materialia, vol.39, issue.3, pp.401-410, 1991.
DOI : 10.1016/0956-7151(91)90319-V

G. C. Obasi, S. Birosca, J. Quinta-da-fonseca, and M. Preuss, Effect of ?? grain growth on variant selection and texture memory effect during ???????????? phase transformation in Ti???6 Al???4 V, Acta Materialia, vol.60, issue.3, pp.1048-1058, 2012.
DOI : 10.1016/j.actamat.2011.10.038

N. Gey and M. Humbert, Characterization of the variant selection occurring during the ???????????? phase transformations of a cold rolled titanium sheet, of the variant sele, pp.277-287, 2002.
DOI : 10.1016/S1359-6454(01)00351-2

L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi et al., Texture heterogeneities induced by subtransus processing of near ?? titanium alloys, Acta Materialia, vol.56, issue.16, pp.4298-4308, 2008.
DOI : 10.1016/j.actamat.2008.04.065

Z. Song and D. W. Hoeppner, Dwell time effects on the fatigue behaviour of titanium alloys, International Journal of Fatigue, vol.10, issue.4, pp.211-218, 1988.
DOI : 10.1016/0142-1123(88)90001-1

F. Bridier, P. Villechaise, and J. Mendez, Slip and fatigue crack formation processes in an ??/?? titanium alloy in relation to crystallographic texture on different scales, Acta Materialia, vol.56, issue.15, pp.3951-3962, 2008.
DOI : 10.1016/j.actamat.2008.04.036

W. J. Evans, Optimising mechanical properties in alpha+beta titanium alloys, Materials Science and Engineering: A, vol.243, issue.1-2, pp.89-96, 1998.
DOI : 10.1016/S0921-5093(97)00784-3

F. Mcbagonluri, E. Akpan, C. Mercer, W. Shen, and W. O. Soboyejo, An investigation of the effects of microstructure on dwell fatigue crack growth in Ti-6242, Materials Science and Engineering: A, vol.405, issue.1-2, pp.111-134, 2005.
DOI : 10.1016/j.msea.2005.05.097

M. R. Bache, Processing titanium alloys for optimum fatigue performance, International Journal of Fatigue, vol.21, pp.105-111, 1999.
DOI : 10.1016/S0142-1123(99)00061-4

W. J. Evans and M. R. Bache, Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI685, International Journal of Fatigue, vol.16, issue.7, pp.443-452, 1994.
DOI : 10.1016/0142-1123(94)90194-5

W. J. Evans, Time and frequency dependant fatigue in titanium and nickel alloys, 2006.

Y. H. Yu, W. D. Zeng, and Y. H. Zhou, Low-cycle dwell-time fatigue in Ti-6.5Al-3.5Mo- 1,5Zr-0,3Si titanium alloy, pp.1987-1993, 2003.

F. Sansoz and H. Ghonem, Fatigue crack growth mechanisms in Ti6242 lamellar microstructures: Influence of loading frequency and temperature, Metallurgical and Materials Transactions A, vol.21, issue.321, pp.2565-2577, 2003.
DOI : 10.1007/s11661-003-0016-1

H. P. Chu, B. A. Macdonald, and O. P. Arora, No Title, 5th Int. Conf. on Titanium, p.2395, 1984.

D. L. Davidson and D. Eylon, Titanium alloy fatigue fracture facet investigation by selected area electron channeling, Metallurgical Transactions A, vol.10, issue.5, pp.837-843, 1980.
DOI : 10.1007/BF02661213

G. Gauliard, Détection de colonies dans un alliage de titane, 2006.

A. L. Pilchak, W. J. Porter, and R. John, Room temperature fracture processes of a near-?? titanium alloy following elevated temperature exposure, Journal of Materials Science, vol.468, issue.470, pp.7235-7253, 2012.
DOI : 10.1007/s10853-012-6673-y

W. J. Evans, Stress relaxation and notch fatigue in Ti-6Al-4V, Scripta Metallurgica, vol.21, issue.9, pp.1223-1227, 1987.
DOI : 10.1016/0036-9748(87)90353-X

L. Toubal, P. Bocher, and A. Moreau, Dwell-fatigue life dispersion of a near alpha titanium alloy, International Journal of Fatigue, vol.31, issue.3, pp.601-605, 2009.
DOI : 10.1016/j.ijfatigue.2008.09.010

D. Eylon and P. J. Bania, Fatigue cracking characteristics of ??-annealed large colony Ti-11 alloy, Metallurgical Transactions A, vol.9, issue.1, pp.1273-1279, 1978.
DOI : 10.1007/BF02652251

L. S. Vesier and S. D. Antolovich, Fatigue crack propagation in Ti-6242 as a function of temperature and waveform, Engineering Fracture Mechanics, vol.37, issue.4, pp.753-775, 1990.
DOI : 10.1016/0013-7944(90)90074-Q

M. R. Bache, W. J. Evans, V. Randle, and R. J. Wilson, Characterization of mechanical anisotropy in titanium alloys, Materials Science and Engineering: A, vol.257, issue.1, pp.139-144, 1998.
DOI : 10.1016/S0921-5093(98)00832-6

C. C. Wojcik, K. S. Chan, and D. A. Koss, Stage I fatigue crack propagation in a titanium alloy, Acta Metallurgica, vol.36, issue.5, pp.1261-1270, 1988.
DOI : 10.1016/0001-6160(88)90278-7

R. R. Boyer, G. E. Welsch, and E. W. Collings, Ti-6Al-2Sn-4Zr-2Mo-0.08Si, Materials Properties Handbook: Titanium Alloys, pp.337-375, 1994.

P. Villechaise and J. Mendez, Comportement en fatigue-fluage (dwell) à 20°C de l'alliage de titane Ti6242beta, 2006.

K. Kuzmenkov, Étude de l'effet du temps de maintien sur le comportement et la rupture de l'alliage Ti-6242, 2012.

J. Brillaud and F. Lagattu, Limits and possibilities of laser speckle and white-light image-correlation methods: theory and experiments, Applied Optics, vol.41, issue.31, pp.6603-6616, 2002.
DOI : 10.1364/AO.41.006603

V. Randle, Microtexture Determination and Its Applications, Maney for the Institute of Materials, Minerals and Mining, 2003.

V. Randle and O. Engler, Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, 2014.

M. J. Donachie, Titanium : A Technical Guide, 1988.

D. S. Bright, J. C. Russ, and T. M. Hare, Application of the Hough Transform to Electron Diffraction Patterns, J. Comput. Assist. Microsc, vol.1, pp.3-37, 1989.

N. C. Krieger-lassen, D. Jensen, and K. Conradsen, Image Processing Procedures for Analysis of Electron Back Scattering Patterns, Scanning Microsc, vol.6, pp.115-121, 1992.

Y. Combres and B. Champin, Traitements thermiques des alliages de titane

V. T. Dang, Simulation numérique du comportement mécanique en fatigue d'agrégats polycristallins métalliques, 2016.

G. Welsch and W. Bunk, Deformation modes of the ??-phase of ti-6al-4v as a function of oxygen concentration and aging temperature, Metallurgical Transactions A, vol.7, issue.5, pp.889-899, 1982.
DOI : 10.1007/BF02642403

P. N. Singh, B. K. Singh, and V. Singh, Phase instability in titanium alloy GTM-900 during lowcycle fatigue at elevated temperature, Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, pp.357-361, 1998.
DOI : 10.1016/B978-008043326-4/50062-3

I. Weiss and S. L. Semiatin, Thermomechanical processing of alpha titanium alloys???an overview, Materials Science and Engineering: A, vol.263, issue.2, pp.243-256, 1999.
DOI : 10.1016/S0921-5093(98)01155-1