Y. O. Koren, U. O. Heisel, F. D. Jovane, T. U. Moriwaki, G. O. Pritschow et al., Reconfigurable Manufacturing Systems, CIRP Annals - Manufacturing Technology, vol.48, issue.2, pp.527-540, 1999.
DOI : 10.1016/S0007-8506(07)63232-6

J. W. Fowler and O. Rose, Grand Challenges in Modeling and Simulation of Complex Manufacturing Systems, SIMULATION, vol.80, issue.9, pp.469-476, 2004.
DOI : 10.1177/0037549704044324

K. Tamani, Développement d'une méthodologie de pilotage intelligent par régulation de flux adaptée aux systèmes de production, Thèse de Doctorat, 2008.

A. Bratcu, Détermination systématiques des graphes de précédence et équilibrage des lignes d'assemblage, Thèse de Doctorat, 2001.

V. Giard, Gestion de le production et des flux ; production et techniques quantitatives appliquées à la gestion, Economica, 2003.

A. Courtois, C. Martin-bonnefous, M. Pillet, and M. Pillet, Gestion de production, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00633422

R. Biteau and S. Biteau, Maîtriser les flux industriels : les outils d'analyse, 1998.

L. Gu, Modèles Déterministe , Stochastique et Multicritère pour l' Equilibrage de Lignes d' Assemblage, Thèse de doctorat, 2008.

Y. Koren and M. Shpitalni, Design of reconfigurable manufacturing systems, Journal of Manufacturing Systems, vol.29, issue.4, pp.130-141, 2011.
DOI : 10.1016/j.jmsy.2011.01.001

Y. Koren, General RMS Characteristics. Comparison with Dedicated and Flexible Systems, Reconfigurable manufacturing systems and transformable factories, pp.27-45, 2006.
DOI : 10.1007/3-540-29397-3_3

A. Sethi and S. Sethi, Flexibility in manufacturing: A survey, International Journal of Flexible Manufacturing Systems, vol.2, issue.4, pp.289-328, 1990.
DOI : 10.1007/BF00186471

J. Browne, D. Dubois, K. Rathmill, S. P. Sethi, and K. E. Stecke, Classification of flexible manufacturing systems, The FMS magazine, vol.2, issue.2, pp.114-117, 1984.

V. Kumar, Entropic measures of manufacturing flexibility, International Journal of Production Research, vol.27, issue.7, pp.957-966, 1987.
DOI : 10.1080/00207548208947770

D. Gerwin, An Agenda For Research on the Flexibility of Manufacturing Processes, International Journal of Operations & Production Management, vol.7, issue.1, pp.38-49, 1987.
DOI : 10.1108/eb054784

F. Carter and M. , Designing flexibility into automated manufacturing systems, Proc. 2nd ORSA/TIMS Conference on Flexible Manufacturing systems :OR Models and Applications, pp.107-118, 1986.

M. Larabi, Le problème de job-shop avec transport : modélisation et optimisation, 2010.

P. Baptiste, M. Flamini, and F. Sourd, Lagrangian bounds for just-in-time job-shop scheduling, Computers & Operations Research, vol.35, issue.3, pp.906-915, 2008.
DOI : 10.1016/j.cor.2006.05.009

URL : https://hal.archives-ouvertes.fr/hal-01185207

Z. Guo, W. Wong, S. Leung, J. Fan, and S. Chan, Mathematical model and genetic optimization for the job shop scheduling problem in a mixed- and multi-product assembly environment: A case study based on the apparel industry, Computers & Industrial Engineering, vol.50, issue.3, pp.202-219, 2006.
DOI : 10.1016/j.cie.2006.03.003

A. Scholl and S. Voß, Simple assembly line balancing?Heuristic approaches, Journal of Heuristics, vol.32, issue.3, pp.217-244, 1997.
DOI : 10.1007/BF00127358

J. Carlier, Ordonnancements ?? contraintes disjonctives, RAIRO - Operations Research, vol.12, issue.4, pp.333-350, 1978.
DOI : 10.1051/ro/1978120403331

URL : http://archive.numdam.org/article/RO_1978__12_4_333_0.pdf

J. Carlier and É. Pinson, An Algorithm for Solving the Job-Shop Problem, Management Science, vol.35, issue.2, pp.164-176, 1989.
DOI : 10.1287/mnsc.35.2.164

A. Manceaux, H. B. El-haouzi, A. Thomas, J. Pétin, and T. Munier, Reconfiguration dynamique d'une ligne d'assemblage par recherche d'atteignabilité sur un réseau d'automates communicants, 10ème Conférence Francophone de Modélisation , Optimisation et Simulation, MOSIM'14

M. Mabed, F. Bousseau, and M. Bourcerie, Modelisation d'une ligne de galvanoplastie par les rdpt/p : cas multi-produits, MOSIM'01, 3e Conférence Francophone de MOdélisation et SIMulation, p.p. xx, 2001.

M. S. Anand and S. K. Sindhe, Modeling and simulation of job shop scheduling using petri-nets, International Journal of Enginnering Research and Applications, vol.3, issue.2, pp.492-496, 2013.

M. Piera and G. Mu?i?, Coloured Petri net scheduling models: Timed state space exploration shortages, Mathematics and Computers in Simulation, vol.82, issue.3, pp.428-441, 2011.
DOI : 10.1016/j.matcom.2010.10.014

J. P. Caballero-villalobos, G. E. Mejía-delgadillo, and R. G. García-cáceres, Scheduling of complex manufacturing systems with Petri nets and genetic algorithms: a case on plastic injection moulds, The International Journal of Advanced Manufacturing Technology, vol.201, issue.3, pp.2773-2786, 2013.
DOI : 10.1007/s00170-013-5175-7

A. Mhalla and B. Mohamed, Contribution to the Maintenance of Manufacturing Systems with Time Constraints Using Fuzzy Petri Nets, Proceedings of the International Conference on Control, Engineering & Information Technology (CEIT'14), pp.297-309, 2014.

H. Haleh, A. Bahari, and B. Moody, Performance Analysis of Manufacturing Systems Using Deterministic and Stochastic Petri Nets, pp.1-12, 2014.

C. Girault and J. Pradat-peyre, Les réseaux de petri de haut-niveau, Les réseaux de Petri, 2001.

M. Barad and D. Sipper, Flexibility in manufacturing systems: definitions and Petri net modelling, International Journal of Production Research, vol.4, issue.2, pp.237-248, 1988.
DOI : 10.1080/00207548208947770

J. Ezpeleta, J. M. Colom, and J. Martinez, A petri net based deadlock prevention policy for flexible manufacturing systems Robotics and Automation, IEEE Transactions on, vol.11, issue.2, pp.173-184, 1995.

M. Zhou and K. Venkatesh, Modeling, simulation, and control of flexible manufacturing systems : a Petri net approach, World Scientific, vol.6, 1999.
DOI : 10.1142/3376

C. Girault and R. Valk, Petri nets for systems engineering : a guide to modeling, verification, and applications, 2013.
DOI : 10.1007/978-3-662-05324-9

URL : https://hal.archives-ouvertes.fr/hal-01489070

O. Kilincci and G. M. Bayhan, A Petri net approach for simple assembly line balancing problems, The International Journal of Advanced Manufacturing Technology, vol.114, issue.8, pp.11-12, 2006.
DOI : 10.1007/s00170-005-0154-2

J. Eloundou, D. Baudry, A. Bensrhair, A. Louis, and B. Mazari, Flexible Job Shop Models for Solving Scheduling and Layout Problems Using Coloured Petri Nets, Applied Mechanics and Materials, pp.638-642, 2014.
DOI : 10.4028/www.scientific.net/AMM.598.638

URL : http://doi.org/10.4028/www.scientific.net/amm.598.638

P. Thomas, Petri net control of a kanban loop To cite this version, 2011.

K. Saitou, S. Malpathak, and H. Qvam, Robust design of flexible manufacturing systems using, colored petri net and genetic algorithm, Journal of Intelligent Manufacturing, vol.13, issue.5, pp.339-351, 2002.
DOI : 10.1023/A:1019920324813

X. Meng, Modeling of reconfigurable manufacturing systems based on colored timed object-oriented Petri nets, Journal of Manufacturing Systems, vol.29, issue.2-3, pp.81-90, 2010.
DOI : 10.1016/j.jmsy.2010.11.002

M. Zhou and F. Dicesare, Petri net synthesis for discrete event control of manufacturing systems, 2012.
DOI : 10.1007/978-1-4615-3126-5

. P. Tianlong, G. Gu, and . Cai, Timed petri-net based formulation and an algorithm for the optimal scheduling of batch plants, International Journal Applied Mathematics and computer sciences, vol.13, issue.4, pp.527-536, 2003.

B. Sharda and A. Banerjee, Robust manufacturing system design using multi objective genetic algorithms, Petri nets and Bayesian uncertainty representation, Journal of Manufacturing Systems, vol.32, issue.2, pp.315-324, 2013.
DOI : 10.1016/j.jmsy.2013.01.001

P. , D. Stotts, R. W. Newcomb, and Z. Cai, Modelling the logical structure of flexible manufacturing systems with Petri-nets, Computer Communications, vol.12, pp.193-203, 1989.

H. Thomas and W. , Colored Petri Net Modeling of Metal Distribution in a Job Shop Iron Foundry : Improving Flow in a Pull System with Perishable In-Process Inventory, pp.66-77, 2003.

A. Da-silva-ribeiro, E. M. Costa, E. J. Lima, and I. , Flexible manufacturing systems modelling using high level petri nets, 2008.

T. Aized, Modelling and performance maximization of an integrated automated guided vehicle system using coloured Petri net and response surface methods, Computers & Industrial Engineering, vol.57, issue.3, pp.822-831, 2009.
DOI : 10.1016/j.cie.2009.02.009

P. Ballarini, H. Djafri, M. Duflot, S. Haddad, and N. Pekergin, Petri nets compositional modeling and verification of Flexible Manufacturing Systems, 2011 IEEE International Conference on Automation Science and Engineering, pp.588-593, 2011.
DOI : 10.1109/CASE.2011.6042488

H. Hosseini-nasab and A. Sadri, Using Stochastic Colored Petri nets for Designing Multi-Purpose Plants, Engineering, vol.04, issue.10, pp.655-661, 2012.
DOI : 10.4236/eng.2012.410083

URL : http://doi.org/10.4236/eng.2012.410083

B. Barzegar, H. Motameni, and H. Bozorgi, Solving Flexible Job-Shop Scheduling Problem Using Gravitational Search Algorithm and Colored Petri Net, Journal of Applied Mathematics, vol.3, issue.4, pp.1-20, 2012.
DOI : 10.1016/j.ejor.2007.12.035

URL : http://doi.org/10.1155/2012/651310

F. G. Quintanilla, O. Cardin, A. L-'anton, and P. Castagna, A Petri net-based methodology to increase flexibility in service-oriented holonic manufacturing systems, Computers in Industry, vol.76, pp.53-68, 2016.
DOI : 10.1016/j.compind.2015.09.002

Y. Li, W. Wu, S. Wang, and C. Wang, A literature review of algorithms to compute minimal siphons based on petri nets, International Journal of Advancements in Computing Technology, vol.5, issue.1, 2013.

Z. Li, N. Wu, and M. Zhou, Deadlock control of automated manufacturing systems based on petri nets?a literature review, Systems, Man, and Cybernetics, Part C : Applications and Reviews IEEE Transactions on, vol.42, issue.4, pp.437-462, 2012.

K. Jensen, Coloured Petri nets : basic concepts, analysis methods and practical use, 2013.

G. Fleury, P. Lacomme, and A. Tanguy, Simulation à événements discrets. Eyrolles, 2006.

E. Yücesan and J. W. Fowler, Logistics systems, simulation analysis of simulation analysissimulation analysis of manufacturing and logistics systems, Encyclopedia of production and manufacturing management, pp.687-697, 2000.

Y. Kuo, T. Yang, C. Cho, and Y. Tseng, Using simulation and multi-criteria methods to provide robust solutions to dispatching problems in a flow shop with multiple processors, Mathematics and Computers in Simulation, vol.78, issue.1, pp.40-56, 2008.
DOI : 10.1016/j.matcom.2007.06.002

H. Huang, W. Pei, H. Wu, and M. May, A research on problems of mixed-line production and the re-scheduling, Robotics and Computer-Integrated Manufacturing, vol.29, issue.3, pp.64-72, 2013.
DOI : 10.1016/j.rcim.2012.04.014

L. Xing, Y. Chen, and K. Yang, Multi-objective flexible job shop schedule: Design and evaluation by simulation modeling, Applied Soft Computing, vol.9, issue.1, pp.362-376, 2009.
DOI : 10.1016/j.asoc.2008.04.013

L. Zhuo, D. Chua-kim-huat, and K. H. Wee, Scheduling dynamic block assembly in shipbuilding through hybrid simulation and spatial optimisation, International Journal of Production Research, vol.49, issue.20, pp.5986-6004, 2012.
DOI : 10.1007/s00170-008-1462-0

J. Eloundou, M. Sahnoun, D. Baudry, A. Bensrhair, and A. Louis, Variability of production in flexible manufacturing systems :petri net modelling and simulation, Xème Conférence Internationale : Conception et Production Intégrées, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01260683

M. Gourgand, N. Grangeon, and S. Norre, A contribution to the stochastic flow shop scheduling problem, European Journal of Operational Research, vol.151, issue.2, pp.415-433, 2003.
DOI : 10.1016/S0377-2217(02)00835-4

URL : https://hal.archives-ouvertes.fr/hal-00119803

F. Dugardin, F. Yalaoui, and L. Amodeo, New multi-objective method to solve reentrant hybrid flow shop scheduling problem, European Journal of Operational Research, vol.203, issue.1, pp.22-31, 2010.
DOI : 10.1016/j.ejor.2009.06.031

G. Lee, Estimating order lead times in hybrid flowshops with different scheduling rules, Computers & Industrial Engineering, vol.56, issue.4, pp.1668-1674, 2009.
DOI : 10.1016/j.cie.2008.10.016

V. Vinod and R. Sridharan, Simulation modeling and analysis of due-date assignment methods and scheduling decision rules in a dynamic job shop production system, International Journal of Production Economics, vol.129, issue.1, pp.127-146, 2011.
DOI : 10.1016/j.ijpe.2010.08.017

O. Joseph and R. Sridharan, Effects of flexibility and scheduling decisions on the performance of an FMS: simulation modelling and analysis, International Journal of Production Research, vol.2, issue.2, pp.2058-2078, 2012.
DOI : 10.1080/00207549408956970

L. W. Schruben and T. M. Roeder, Fast Simulations of Large-Scale Highly Congested Systems, SIMULATION: Transactions of the Society for Modeling and Simulation, vol.79, issue.3, pp.115-125, 2003.
DOI : 10.1177/0037549703255634

G. Deleuze, N. Brinzei, and T. Hodicq, Estimation of common cause failures probabilities in control systems by colored, hierarchical petri nets, 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, SAFE- PROCESS'2015, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01242663

K. Negrichi, Approche intégrée pour l'analyse de risques et l'évaluation des performances : application aux services de stérilisation hospitalière, 2015.

T. Berger, D. Deneux, T. Bonte, E. Cocquebert, and D. Trentesaux, Arezzo-flexible manufacturing system: A generic flexible manufacturing system shop floor emulator approach for high-level control virtual commissioning, Concurrent Engineering, vol.23, issue.4, pp.333-342, 2015.
DOI : 10.1177/1063293X15591609

M. M. Tseng and S. J. Hu, Mass customization, Cirp Encyclopedia of Production Engineering, pp.836-843, 2014.

F. Basile, F. Caccavale, P. Chiacchio, J. Coppola, A. Marino et al., Automated synthesis of hybrid Petri net models for robotic cells in the aircraft industry, Control Engineering Practice, vol.31, pp.35-49, 2014.
DOI : 10.1016/j.conengprac.2014.05.008

K. Jensen, L. M. Kristensen, and L. Wells, Coloured Petri Nets and CPN Tools for modelling and validation of concurrent systems, International Journal on Software Tools for Technology Transfer, vol.2, issue.2, pp.3-4, 2007.
DOI : 10.1007/s10009-007-0038-x

A. W. Appel and D. B. Macqueen, Standard ML of New Jersey, Programming Language Implementation and Logic Programming, pp.1-13, 1991.
DOI : 10.1007/3-540-54444-5_83

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.55.9444

R. Milner, The definition of standard ML : revised, 1997.

M. Dahane, M. Sahnoun, B. Bettayeb, D. Baudry, and H. Boudhar, Impact of spare parts remanufacturing on the operation and maintenance performance of offshore wind turbines: a multi-agent approach, Journal of Intelligent Manufacturing, vol.17, issue.6, pp.1-19, 2015.
DOI : 10.1007/s10845-015-1154-1

URL : https://hal.archives-ouvertes.fr/hal-01235078

R. G. Sargent, Verification and validation of simulation models, Journal of Simulation, vol.11, issue.3, pp.12-24, 2013.
DOI : 10.1057/jos.2012.11

R. W. Pew and S. Baron, Perspectives on human performance modelling, Automatica, vol.19, issue.6, pp.663-676, 1983.
DOI : 10.1016/0005-1098(83)90030-4

B. P. Zeigler, Object-oriented simulation with hierarchical, modular models : intelligent agents and endomorphic systems. Academic press, 2014.

R. G. Sargent, Model Verification and Validation, Modeling and Simulation in the Systems Engineering Life Cycle, pp.57-65, 2015.
DOI : 10.1007/978-1-4471-5634-5_6

J. Gattorna, Dynamic supply chains. Pearson Education Limited, 2015.

S. B. Mena, Introduction aux méthodes multicritères d'aide à la décision, Biotechnologie , Agronomie, Société et Environnement, vol.4, issue.2, pp.83-93, 2000.

C. Sourisse, L'??laboration des cahiers des charges des ??quipements de production industriels, Revue de l'Electricit?? et de l'Electronique, vol.-, issue.06, pp.18-22, 1995.
DOI : 10.3845/ree.1995.060

O. Devise, Modélisation orientée objet de la transitique dans un environnement fms, pp.479-484, 1995.

M. Larabi, Job-shop with transport : its modelling and optimisation. Theses, 2010.
URL : https://hal.archives-ouvertes.fr/tel-00625528

P. Vincke and B. Roy, L" aide multicritère à la décision, 1989.

Y. Collette and P. Siarry, Optimisation multiobjectif : Algorithmes. Editions Eyrolles, 2011.

J. Figueira, V. Mousseau, and B. Roy, Electre methods, " in Multiple criteria decision analysis : State of the art surveys, pp.133-153, 2005.

R. Caillet, Analyse multicritère : Étude de comparaison des méthodes existantes en vue d'une application en analyse de cycle de vie, 2003.

Ü. Bilge, M. F?rat, and E. Albey, A parametric fuzzy logic approach to dynamic part routing under full routing flexibility, Computers & Industrial Engineering, vol.55, issue.1, pp.15-33, 2008.
DOI : 10.1016/j.cie.2007.11.013

F. Zammori, M. Braglia, and M. Frosolini, A measurement method of routing flexibility in manufacturing systems, International Journal of Industrial Engineering Computations, vol.2, issue.3, pp.593-616, 2011.
DOI : 10.5267/j.ijiec.2011.03.001

O. Joseph and R. Sridharan, Evaluation of routing flexibility of a flexible manufacturing system using simulation modelling and analysis, The International Journal of Advanced Manufacturing Technology, vol.157, issue.1, pp.273-289, 2011.
DOI : 10.1007/s00170-011-3153-5

A. Chang, On the measurement of labor flexibility, 2004 IEEE International Engineering Management Conference (IEEE Cat. No.04CH37574), pp.163-167, 2004.
DOI : 10.1109/IEMC.2004.1407097

A. Chang, On the measurement of routing flexibility: A multiple attribute approach, International Journal of Production Economics, vol.109, issue.1-2, pp.122-136, 2007.
DOI : 10.1016/j.ijpe.2006.11.011

A. Charnes, W. W. Cooper, and E. Rhodes, Measuring the efficiency of decision making units, European Journal of Operational Research, vol.2, issue.6, pp.429-444, 0201.
DOI : 10.1016/0377-2217(78)90138-8