. La-figure-4, 11, met en exergue les valeurs identifiées des erreurs de mouvement de l'axe X

L. Colonne-de-gauche, illustre l'identification menée durant la période n o 1 (mois de juillet) La colonne de droite, quant à elle

Y. Abbaszadeh-mir, J. R. Mayer, G. Cloutier, and C. Et-fortin, Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar, International Journal of Production Research, vol.32, issue.18, pp.4781-4797, 2002.
DOI : 10.1016/0278-6125(91)90058-A

E. K. Abbe, Measuring instruments for physicists, Journal for Instrumental Information, vol.10, pp.446-448, 1890.

B. Acko, M. Mccarthy, F. Haertig, and B. Et-buchmeister, Standards for testing freeform measurement capability of optical and tactile coordinate measuring machines, Measurement Science and Technology, vol.23, issue.9, pp.94013-94057, 2012.
DOI : 10.1088/0957-0233/23/9/094013

B. Acko and M. Et-milfelner, Temperature-invariant material standard for monitoring performance of machine tools Journal of Trends in the Development of Machinery and Associated Technology, 2014.

S. Aguado, J. Santolaria, D. Samper, and J. Et-aguilar, Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification, Precision Engineering, vol.37, issue.4, pp.929-943, 2013.
DOI : 10.1016/j.precisioneng.2013.03.006

Y. Altintas, C. Brecher, M. Weck, and S. Et-witt, Virtual Machine Tool, CIRP Annals - Manufacturing Technology, vol.54, issue.2, pp.115-138, 2005.
DOI : 10.1016/S0007-8506(07)60022-5

L. Andolfatto, S. Lavernhe, and J. Et-mayer, Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool, International Journal of Machine Tools and Manufacture, vol.51, issue.10-11, pp.787-796, 2011.
DOI : 10.1016/j.ijmachtools.2011.07.002
URL : https://hal.archives-ouvertes.fr/hal-00609038

M. F. Ashby, Materials selection in mechanical design, Le Journal de Physique IV, vol.03, issue.C7, pp.67-70, 2005.
DOI : 10.1051/jp4:1993701
URL : https://hal.archives-ouvertes.fr/jpa-00251707

G. Belforte, B. Bona, E. Canuto, F. Donati, F. Ferraris et al., Coordinate Measuring Machines and Machine Tools Selfcalibration and Error Correction, CIRP Annals - Manufacturing Technology, vol.36, issue.1, pp.359-364, 1987.
DOI : 10.1016/S0007-8506(07)62622-5

G. Béranger, J. Tiers, and F. Et-duffaut, Invar Famille d'alliages fonctionnels. Techniques de l'ingénieur -Matériaux à propriétés mécaniques, base documentaire : TIB535DUO.(ref. article : n2750), 2013.

D. Berger, D. Brabandt, and G. Et-lanza, Conception of a mobile climate simulation chamber for the investigation of the influences of harsh shop floor conditions on in-process measurement systems in machine tools, Measurement, vol.74, pp.233-237, 2015.
DOI : 10.1016/j.measurement.2015.07.010

K. P. Birch and M. J. Et-downs, An Updated Edl??n Equation for the Refractive Index of Air, Metrologia, vol.30, issue.3, p.155, 1993.
DOI : 10.1088/0026-1394/30/3/004

J. Bryan, International status of thermal error research CIRP Annals -Manufacturing Technology, pp.645-656, 1990.
DOI : 10.1016/s0007-8506(07)63001-7

K. Busch, H. Kunzmann, and F. Et-wäldele, Calibration of coordinate measuring machines, Precision Engineering, vol.7, issue.3, pp.139-144, 1985.
DOI : 10.1016/0141-6359(85)90036-4

M. Camboulives, Étalonnage d'un espace de travail par multilatération École normale supérieure de Cachan -ENS Cachan, Thèse de doctorat, pp.157-161, 2015.

S. Camus, Contrôle des machines à mesurer tridimensionnelle par la méthode " barre à trous " . Rapport technique, pp.42-75, 2006.

S. Canu, L'inégalité de Bienaymé-Tchebyshev, INSA Rouen. Cité, p.142, 2001.

H. Castro, A method for evaluating spindle rotation errors of machine tools using a laser interferometer, Measurement, vol.41, issue.5, pp.526-537, 2008.
DOI : 10.1016/j.measurement.2007.06.002

H. Castro and M. Et-burdekin, Dynamic calibration of the positioning accuracy of machine tools and coordinate measuring machines using a laser interferometer, International Journal of Machine Tools and Manufacture, vol.43, issue.9, pp.947-954, 2003.
DOI : 10.1016/S0890-6955(03)00083-X

P. Cauchick-miguel, T. Kinga, and J. Et-davis, CMM verification: a survey, Measurement, vol.17, issue.1, pp.1-16, 1996.
DOI : 10.1016/0263-2241(96)00001-2

J. Chen, S. Lin, and B. Et-he, Geometric error compensation for multi-axis CNC machines based on differential transformation, The International Journal of Advanced Manufacturing Technology, vol.43, issue.1-4, pp.1-8, 2013.
DOI : 10.1007/s00170-013-5487-7

J. Choi, B. Min, and S. Et-lee, Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system, Journal of Materials Processing Technology, vol.155, issue.156, pp.155-1562056, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.402

R. Bibliographiques-coorevits and T. , Contribution au développement des techniques d'autocalibrage appliquées aux machines à mesurer tridimensionnelles, Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers -ENSAM, 1990.

M. Côté, Estimation d'incertitudes associées aux huit écarts de membrure d'une machineoutil, Thèse de doctorat, p.35, 2011.

M. G. Cox, The evaluation of key comparison data, Metrologia, vol.39, issue.6, pp.589-94, 2002.
DOI : 10.1088/0026-1394/39/6/10

M. G. Cox, The evaluation of key comparison data: determining the largest consistent subset, Metrologia, vol.44, issue.3, pp.187-94, 2007.
DOI : 10.1088/0026-1394/44/3/005

J. David and T. Et-coorevits, Les limites de la correction par logiciel des erreurs de géométrie des MMT. Définition d'une architecture nouvelle de machine, Actes du 6ème congrès International de Métrologie. MFQ, Lille. Cité page, p.135, 1993.

J. B. De-aquino-silva and M. Et-burdekin, A modular space frame for assessing the performance of co-ordinate measuring machines (CMMs), Precision Engineering, vol.26, issue.1, pp.37-48, 2002.
DOI : 10.1016/S0141-6359(01)00096-4

G. Diolez, Maîtrise de la position géométrique des solides : vers de nouveaux outils plus efficaces, Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers -ENSAM. 8 citations pages xx, pp.33-34, 2006.

R. R. Donaldson, Simple method for separating spindle error from test ball roundness error. Rapport technique, 1972.

B. Edlén, The Refractive Index of Air, Metrologia, vol.2, issue.2, pp.71-118, 1966.
DOI : 10.1088/0026-1394/2/2/002

T. Ekinci and J. Et-mayer, Relationships between straightness and angular kinematic errors in machines, International Journal of Machine Tools and Manufacture, vol.47, issue.12-13, pp.12-131997, 2007.
DOI : 10.1016/j.ijmachtools.2007.02.002

T. Erkan, Méthodes de suivi de l'état des machines-outils par palpage d'artefacts, Thèse de doctorat, p.35, 2010.

T. Erkan, J. R. Mayer, and Y. Et-dupont, Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact, Precision Engineering, vol.35, issue.1, pp.116-125, 2011.
DOI : 10.1016/j.precisioneng.2010.08.003

C. J. Evans, R. J. Hocken, and W. T. Et-estler, Self-Calibration: Reversal, Redundancy, Error Separation, and ???Absolute Testing???, CIRP Annals - Manufacturing Technology, vol.45, issue.2, pp.45617-634, 1996.
DOI : 10.1016/S0007-8506(07)60515-0

F. Hennebelle, Détermination des incertitudes de mesures sur machines à mesurer tridimensionnelles : application aux engrenages, Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers -ENSAM, 2007.

R. J. Hocken and P. H. Et-pereira, Coordinate measuring machines and systems, p.16, 2011.

S. Ibaraki, T. Iritani, and T. Et-matsushita, Calibration of location errors of rotary axes on fiveaxis machine tools by on-the-machine measurement using a touch-trigger probe, International Journal of Machine Tools and Manufacture, issue.0, pp.5844-53, 2012.

S. Ibaraki and W. Et-knapp, Indirect measurement of volumetric accuracy for three-axis and five-axis machine tools, pp.25-47, 2013.

S. Ibaraki and Y. Et-ota, A machining test to calibrate rotary axis error motions of five-axis machine tools and its application to thermal deformation test, International Journal of Machine Tools and Manufacture, vol.86, issue.0, pp.8681-88, 2014.
DOI : 10.1016/j.ijmachtools.2014.07.005

S. Ibaraki, C. Oyama, and H. Et-otsubo, Construction of an error map of rotary axes on a fiveaxis machining center by static r-test, International Journal of Machine Tools and Manufacture, issue.3, pp.51190-200, 2011.

I. Inasaki, K. Kishinami, S. Sakamoto, N. Sugimura, Y. Takeuchi et al., Shaper generation theory of machine tools -its basis and applications, pp.95-103, 1997.

F. Jouy and A. Et-clément, Theoretical Modelisation and Experimental Identification of the Geometrical Parameters of Coordinate-Machines by Measuring a Multi-Directed Bar, CIRP Annals - Manufacturing Technology, vol.35, issue.1, pp.393-396, 1986.
DOI : 10.1016/S0007-8506(07)61913-1

V. Kiridena and P. Et-ferreira, Kinematic modeling of quasistatic errors of three-axis machining centers, International Journal of Machine Tools and Manufacture, vol.34, issue.1, pp.85-100, 1994.
DOI : 10.1016/0890-6955(94)90042-6

H. Kunzmann, E. Trapet, and F. Et-w-"-aldele, Results of the International Comparison of Ball Plate Measurements in CIRP and WECC11WECC: Western European Calibration Cooperation, EAL: European Cooperation for Accreditation of Laboratories (EAL is the successor organization of WECC), CIRP Annals - Manufacturing Technology, vol.44, issue.1, pp.479-482, 1995.
DOI : 10.1016/S0007-8506(07)62367-1

W. Kwa´snykwa´sny, P. Turek, and J. J?-edrzejewski, Survey of machine tool error measuring methods, Journal of Machine Engineering, pp.11-45, 2011.

L. Lahousse, Contribution à la constrution de machines de grande précision géométrique : Le concept de l'information dans l'amélioration des performance des machines, Thèse de doctorat , École Nationale Supérieure d'Arts et Métiers -ENSAM. 2 citations, pp.90-135, 2005.

S. Lavernhe, Prise en compte des contraintes associées au couple MO-CN en génération de trajectoires 5 axes UGV, Thèse de doctorat, 2006.

H. Lee, J. Chen, S. Pan, H. Liou, and P. Hsu, Relationship between ISO 230-2/-6 Test Results and Positioning Accuracy of Machine Tools Using LaserTRACER, Applied Sciences, vol.6, issue.4, pp.105-150, 2016.
DOI : 10.3390/app6040105

W. Lei and Y. Hsu, Accuracy test of five-axis CNC machine tool with 3D probe???ball. Part I: design and modeling, International Journal of Machine Tools and Manufacture, vol.42, issue.10, pp.1153-1162, 2002.
DOI : 10.1016/S0890-6955(02)00047-0

W. Lei and Y. Hsu, Accuracy test of five-axis CNC machine tool with 3D probe-ball. Part II: errors estimation, International Journal of Machine Tools and Manufacture, vol.42, issue.10, pp.1163-1170, 2002.
DOI : 10.1016/S0890-6955(02)00048-2

S. Leleu, Contribution à l'évaluation des angles : conception, réalisation et validation d'un plateau pivotant de très haute précision : vers une nouvelle référence angulaire nationale, 2000.

C. Lim and M. Et-burdekin, Rapid volumetric calibration of coordinate measuring machines using a hole bar artefact, Proceedings of the Institution of Mechanical Engineers, pp.2161083-1093, 2002.
DOI : 10.1243/095440502760272368

Y. Lin and Y. Et-shen, Modelling of Five-Axis Machine Tool Metrology Models Using the Matrix Summation Approach, The International Journal of Advanced Manufacturing Technology, vol.21, issue.4, pp.243-248, 2003.
DOI : 10.1007/s001700300028

J. Linares, J. Chaves-jacob, H. Schwenke, A. Longstaff, S. Fletcher et al., Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer, Precision Engineering, vol.38, issue.3, pp.578-588, 2014.
DOI : 10.1016/j.precisioneng.2014.02.008
URL : https://hal.archives-ouvertes.fr/hal-01440809

O. Lindig and W. Et-pannhorst, Thermal expansion and length stability of Zerodur in dependence on temperature and time, Applied Optics, vol.24, issue.20, pp.3330-3334, 1985.
DOI : 10.1364/AO.24.003330

E. Marsh, Precision Spindle Metrology, p.32, 2009.
DOI : 10.1115/1.2944274

E. R. Marsh, D. A. Arneson, and D. L. Et-martin, A comparison of reversal and multiprobe error separation, Precision Engineering, vol.34, issue.1, pp.85-91, 2010.
DOI : 10.1016/j.precisioneng.2009.03.001

M. Jr and F. J. , The Kolmogorov-Smirnov test for goodness of fit, Journal of the American statistical Association, issue.253, pp.4668-78, 1951.

M. Matsumoto and T. Et-nishimura, Mersenne twister: a 623-dimensionally equidistributed uniform pseudo-random number generator, ACM Transactions on Modeling and Computer Simulation, vol.8, issue.1, pp.3-30, 1998.
DOI : 10.1145/272991.272995

J. Mayer, Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact, CIRP Annals - Manufacturing Technology, vol.61, issue.1, pp.515-518, 2012.
DOI : 10.1016/j.cirp.2012.03.022

M. B. Mccarthy, S. B. Brown, A. Evenden, and A. D. Et-robinson, NPL freeform artefact for verification of non-contact measuring systems, Three-Dimensional Imaging, Interaction, and Measurement, pp.78640-78640, 2011.
DOI : 10.1117/12.876705

S. Mekid, Introduction to Precision Machine Design, pp.15-30, 2009.

S. Mekid and T. Et-ogedengbe, A review of machine tool accuracy enhancement through error compensation in serial and parallel kinematic machines, International Journal of Precision Technology, vol.1, issue.3/4, pp.3-4251, 2010.
DOI : 10.1504/IJPTECH.2010.031657

W. R. Moore, Foundations of mechanical accuracy. The Moore Special Tool Company. 3 citations pages xxii, p.90, 1970.

J. Munoa, X. Beudaert, K. Erkorkmaz, A. Iglesias, A. Barrios et al., Active suppression of structural chatter vibrations using machine drives and accelerometers, CIRP Annals - Manufacturing Technology, vol.64, issue.1, pp.385-388, 2015.
DOI : 10.1016/j.cirp.2015.04.106

S. Osawa, K. Busch, M. Franke, and H. Et-schwenke, Multiple orientation technique for the calibration of cylindrical workpieces on CMMs, Precision Engineering, vol.29, issue.1, pp.56-64, 2005.
DOI : 10.1016/j.precisioneng.2004.04.006

S. Osawa, T. Takatsuji, H. Noguchi, and T. Et-kurosawa, Development of a ball step-gauge and an interferometric stepper used for ball-plate calibration, Precision Engineering, vol.26, issue.2, pp.214-221, 2002.
DOI : 10.1016/S0141-6359(02)00104-6

J. Ouyang and I. Et-jawahir, Ball array calibration on a coordinate measuring machine using a gage block, Measurement, vol.16, issue.4, pp.219-229, 1995.
DOI : 10.1016/0263-2241(95)00035-6

H. Pahk and J. Et-kim, Development of computer integrated system for error diagnosis of a CMM using calibrated mechanical artefacts, International Journal of Machine Tools and Manufacture, vol.33, issue.6, pp.773-790, 1993.
DOI : 10.1016/0890-6955(93)90037-U

H. J. Pahk, Y. S. Kim, and J. H. Et-moon, A new technique for volumetric error assessment of CNC machine tools incorporating ball bar measurement and 3d volumetric error model, International Journal of Machine Tools and Manufacture, issue.11, pp.371583-1596, 1997.

G. Peggs and P. Et-mckeown, Creating a standards infrastructure for co-ordinate measurement technology in the UK. CIRP Annals -Manufacturing Technology, pp.521-523, 1989.

M. Pezeshki and B. Et-arezoo, Kinematic errors identification of three-axis machine tools based on machined work pieces, Precision Engineering, vol.43, p.47, 2015.
DOI : 10.1016/j.precisioneng.2015.09.018

D. Prévost, Modélisation avancée du couple Machine Outil / Commande Numérique dans un contexte UGV pour l'optimisation du calcul de trajectoires multi axes, Thèse de doctorat, École normale supérieure de Cachan -ENS Cachan. 3 citations pages 7, p.29, 2011.

M. Rahman, Modeling and measurement of multi-axis machine tools to improve positioning accuracy in a software way. Oulun yliopisto, p.16, 2004.

R. Ramesh, M. Mannan, and A. Et-poo, Error compensation in machine tools -a review : Part i : geometric, cutting-force induced and fixture-dependent errors, International Journal of Machine Tools and Manufacture, issue.9, pp.401235-1256, 2000.

R. Ramesh, M. Mannan, and A. Et-poo, Error compensation in machine tools ??? a review, International Journal of Machine Tools and Manufacture, vol.40, issue.9, pp.1257-1284, 2000.
DOI : 10.1016/S0890-6955(00)00010-9

T. A. Ruijl, Ultra precision coordinate measuring machine-design, calibration and error compensation, 2001.

M. Sato, Design and performance of 5 axis machines in Japan, Proceeding of 12th International Conference on Machine Tool Engineer's, pp.167-189, 2006.

P. Schellekens, N. Rosielle, H. Vermeulen, M. Vermeulen, S. Wetzels et al., Design for Precision: Current Status and Trends, CIRP Annals - Manufacturing Technology, vol.47, issue.2, pp.47557-586, 1998.
DOI : 10.1016/S0007-8506(07)63243-0

F. W. Scholz and M. A. Stephens, K-sample anderson?darling tests, Journal of the American Statistical Association, vol.82, issue.399, pp.918-924, 1987.
DOI : 10.2307/2288805

H. Schwenke, M. Franke, J. Hannaford, and H. Et-kunzmann, Error mapping of CMMs and machine tools by a single tracking interferometer, CIRP Annals - Manufacturing Technology, vol.54, issue.1, pp.475-478, 2005.
DOI : 10.1016/S0007-8506(07)60148-6

H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt et al., Geometric error measurement and compensation of machines???An update, CIRP Annals - Manufacturing Technology, vol.57, issue.2, pp.660-675, 2008.
DOI : 10.1016/j.cirp.2008.09.008

H. Schwenke, R. Schmitt, P. Jatzkowski, and C. Et-warmann, On-the-fly calibration of linear and rotary axes of machine tools and CMMs using a tracking interferometer, CIRP Annals - Manufacturing Technology, vol.58, issue.1, pp.477-480, 2009.
DOI : 10.1016/j.cirp.2009.03.007

M. Shiraishi, Scope of in-process measurement, monitoring and control techniques in machining processes ??? Part 1: In-process techniques for tools, Precision Engineering, vol.10, issue.4, pp.179-189, 1988.
DOI : 10.1016/0141-6359(88)90052-9

M. Shiraishi, Scope of in-process measurement, monitoring and control techniques in machining processes???Part 2: In-process techniques for workpieces, Precision Engineering, vol.11, issue.1, pp.27-37, 1989.
DOI : 10.1016/0141-6359(89)90006-8

M. Shiraishi, Scope of in-process measurement, monitoring and control techniques in machining processes???Part 3: In-process techniques for cutting processes and machine tools, Precision Engineering, vol.11, issue.1, pp.39-47, 1989.
DOI : 10.1016/0141-6359(89)90007-X

M. Slamani, J. Mayer, and G. Et-cloutier, MODELING AND EXPERIMENTAL VALIDATION OF MACHINE TOOL MOTION ERRORS USING DEGREE OPTIMIZED POLYNOMIAL INCLUDING MOTION HYSTERESIS, Experimental Techniques, vol.15, issue.156, pp.37-44, 2011.
DOI : 10.1111/j.1747-1567.2009.00576.x

A. H. Slocum, Precision Machine Design. Society of Manufacturing Engineers. 11 citations pages xix, xxii, pp.44-45, 1992.

G. T. Smith, Machine Tool Metrology : An Industrial Handbook, p.38, 2016.
DOI : 10.1007/978-3-319-25109-7

A. Srivastava, S. Veldhuis, and M. Et-elbestawit, Modelling geometric and thermal errors in a five-axis cnc machine tool, International Journal of Machine Tools and Manufacture, vol.35, issue.9, pp.1321-1337, 1995.
DOI : 10.1016/0890-6955(94)00048-O

W. Tian, W. Gao, D. Zhang, and T. Et-huang, A general approach for error modeling of machine tools, International Journal of Machine Tools and Manufacture, vol.79, issue.0, pp.17-23, 2014.
DOI : 10.1016/j.ijmachtools.2014.01.003

C. Tournier, Contribution to the design of free-form surfaces<br />the machining surface in 5-axis iso scallop machining, Thèse de doctorat, École normale supérieure de Cachan -ENS Cachan. 2 citations pages xix et 7, 2001.

E. Trapet, J. A. Martín, J. Yagüe, H. Spaan, and V. Et-zelen´yzelen´y, Self-centering probes with parallel kinematics to verify machine-tools, Precision Engineering, vol.30, issue.2, pp.165-179, 2006.
DOI : 10.1016/j.precisioneng.2005.07.002

E. Trapet and F. Et-wäldele, A reference object based method to determine the parametric error components of coordinate measuring machines and machine tools, Measurement, vol.9, issue.1, pp.17-22, 1991.
DOI : 10.1016/0263-2241(91)90022-I

M. Tsutsumi and A. Saito, Identification and compensation of systematic deviations particular to 5-axis machining centers, International Journal of Machine Tools and Manufacture, vol.43, issue.8, pp.771-780, 2003.
DOI : 10.1016/S0890-6955(03)00053-1

P. Turek, J. Je¸drzejewskije¸drzejewski, and W. Et-modrzycki, Methods of machine tool error compensation, Journal of Machine Engineering, vol.10, issue.4, pp.5-25, 2010.

L. Uriarte, M. Zatarain, D. Axinte, J. Yagüe-fabra, S. Ihlenfeldt et al., Machine tools for large parts, CIRP Annals - Manufacturing Technology, vol.62, issue.2, pp.731-750, 2013.
DOI : 10.1016/j.cirp.2013.05.009

K. Vacharanukul and S. Et-mekid, In-process dimensional inspection sensors, Measurement, vol.38, issue.3, pp.204-218, 2005.
DOI : 10.1016/j.measurement.2005.07.009

A. Vissì-ere, Mesure de cylindricité de très haute exactitude : Développement d'une nouvelle machine de référence, Thèse de doctorat, Ècole Nationale Supérieure d'Arts et Métiers - ENSAM. 4 citations pages xxii, pp.90-135, 2013.

J. K. Wendt, EMRP IND62 TIM -Traceable in-process dimensional measurement. PTB, p.46, 2013.

D. J. Whitehouse, Some theoretical aspects of error separation techniques in surface metrology, Journal of Physics E: Scientific Instruments, vol.9, issue.7, pp.531-563, 1976.
DOI : 10.1088/0022-3735/9/7/007

A. Wozniak and M. Jankowski, Wireless communication influence on CNC machine tool probe metrological parameters, The International Journal of Advanced Manufacturing Technology, vol.22, issue.1, pp.535-542, 2015.
DOI : 10.1007/s00170-015-7374-x

H. Yang and J. Et-ni, Dynamic neural network modeling for nonlinear, nonstationary machine tool thermally induced error, International Journal of Machine Tools and Manufacture, vol.45, issue.4-5, pp.455-465, 2005.
DOI : 10.1016/j.ijmachtools.2004.09.004

Z. Yu, L. Tiemin, and T. Et-xiaoqiang, Geometric Error Modeling of Machine Tools Based on Screw Theory, International Conference on Advances in Engineering 2011. 2 citations, pp.845-849, 2011.
DOI : 10.1016/j.proeng.2011.11.2748

S. Zargarbashi and J. Et-mayer, Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor, International Journal of Machine Tools and Manufacture, vol.49, issue.10, pp.759-766, 2009.
DOI : 10.1016/j.ijmachtools.2009.05.001

G. Zhang, Y. Huang, W. Shi, and W. Et-fu, Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering, International Journal of Machine Tools and Manufacture, vol.43, issue.7, pp.43699-706, 2003.
DOI : 10.1016/S0890-6955(03)00026-9

G. Zhang and Y. Et-zang, A Method for Machine Geometry Calibration Using 1-D Ball Array, CIRP Annals - Manufacturing Technology, vol.40, issue.1, pp.519-522, 1991.
DOI : 10.1016/S0007-8506(07)62044-7

W. Zhu, Z. Wang, and K. Et-yamazaki, Machine tool component error extraction and error compensation by incorporating statistical analysis, International Journal of Machine Tools and Manufacture, vol.50, issue.9, pp.798-806, 2010.
DOI : 10.1016/j.ijmachtools.2010.05.004

. Apisensor, Site internet de API -Ballbar, 2016.

. Apisensor, Site internet de API -XD Laser, p.46, 2016.

. Azom, Aluminium, 2013.

. Azom, Carbon steel, 2013.

. Azom, Invar -nickel iron alloy, 2014.

. Blum, Site web Blum -Palpeur TC51. http ://www.blum-novotest.de/fr/composants-de-mesure/produits/sondes-de-machine- outils/tc51-tc61, p.137, 2016.

G. Research, 2014 world machine-tool output and consumption survey, 2014.

R. Gardner and R. , 2015 world machine-tool output and consumption survey, 2015.

. Heidenhain, Site internet de Heidenhain, pp.29-47, 2013.

. Heidenhain, Systèmes de mesure angulaire avec roulement intégrés, 2015.

. Heidenhain, Systèmes de mesure linéaire pour machines-outils à commande numérique, 2015.

. Heidenhain, Site internet de Heidenhain -KGM. http ://www.heidenhain.fr/fr_FR/produits/systemes-de-mesure-decomparaison/kgm/specifications, www.heidenhain.fr. 2 citations, pp.29-32, 2016.

. Heidenhain, Site internet de Heindenhain -Palpeur TS740. http ://www.heidenhain.com/en_US/products-and-applications/touch-probes/workpiece- measurement/ts-640ts-642ts-740, p.137, 2016.

. Microplan-g, Site internet de Microplan-Group, 2013.

H. H. Molinaro, E. Vourc-'h, and J. Et-barbot, Capteurs et chaîne d'acquisition, 2015.

. Schott, Zerodur : Zero Expansion Glass Ceramic, 2013.

. Siemens, SINUMERIK 840D sl, 2006.

R. Siemens, SINUMERIK 840D sl, pp.10-28, 2006.

T. Survey, Report on the end-user survey of the existing measurement standards for different applications in in-process metrology, 2013.

F. Viprey, Modélisation et mesure des défauts géométriques de MOCN 5 axes en vue de leur compensation, Mémoire de Master 2 Recherche, École normale supérieure de Cachan - ENS Cachan. 4 citations pages xix, pp.183-187, 2013.

F. Viprey, S. Lavernhe, C. Tournier, and H. Et-nouira, Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique, 14eme coloque national AIP Primeca, 2015.

F. Viprey, S. Lavernhe, C. Tournier, and H. Et-nouira, Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy, Laser Metrology and Machine Performance (LAMDAMAP) 2015, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01122531

F. Viprey, H. Nouira, S. Lavernhe, and C. Et-tournier, Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system, MacroScale : Recent Developments In Traceable Dimensional Measurements, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01079558

F. Viprey, H. Nouira, S. Lavernhe, and C. Et-tournier, Identification of the geometric errors of a mikron 5-axis machine-tool using the hole-bar 3d standard and the laser tracer interferometer system, Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, p.162, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01081466

F. Viprey, H. Nouira, S. Lavernhe, and C. Et-tournier, Determination of volumetric machine tool errors by using a hole-bar material standard (Multi-Feature Bar -MFB), TIM Final Workshop, 2016.

F. Viprey, H. Nouira, S. Lavernhe, and C. Et-tournier, Novel hole-bar standard design and inter-comparison for geometric errors identification on machine-tool, ICPE 2016 : 18th International Conference on Precision Engineering, 2016.
DOI : 10.1016/j.precisioneng.2016.06.002
URL : https://hal.archives-ouvertes.fr/hal-01313669

F. Viprey, H. Nouira, S. Lavernhe, and C. Et-tournier, Novel multi-feature bar design for machine tools geometric errors identification, Precision Engineering, vol.46, p.162, 2016.
DOI : 10.1016/j.precisioneng.2016.06.002
URL : https://hal.archives-ouvertes.fr/hal-01357513

F. Viprey, H. Nouira, S. Lavernhe, and C. Et-tournier, Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy, TIM Final Références Workshop, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01359427

F. Viprey, C. Souvignet, and E. Et-fargier, Certificat d'étalonnage de la Multi-Features Bar (Confidentiel). Numéro P010115 DMSI, p.79, 2015.