T. Ogawa and E. Tsunetomi, Hot Cracking Susceptibility of Austenitic Stainless Steels, Welding journal, 1982.

C. Gonnet, Caractérisation fine de brames brutes de solidification de la nuance 304L, Phelma Engineering school, INPG, 2011.

S. K. Kim, Y. K. Shin, and N. J. Kim, Distribution of ? ferrite content in continuously cast type 304 stainless steel slabs, Ironmak. Steelmak, vol.22, issue.4, pp.316-325, 1995.

F. Czerwinski, J. Y. Cho, A. Brodtka, A. Zielinska-lipiec, J. H. Sunwoo et al., The edge-cracking of AISI 304 stainless steel during hot-rolling, Journal of Materials Science, vol.34, issue.19, pp.4727-4735, 1999.
DOI : 10.1023/A:1004670602478

J. Cho, Effect of delta ferrite on edge-crack formation during hot rolling of austenitic stainless steel, 1999.

C. R. Speich, Chromium-iron nickel system, ASM Met. Handb, pp.424-426, 1973.

E. Schurmann and J. Brauckmann, Etude des équilibres de fusion dans le coin de fer du système ternaire Fer-Chrome-Nickel, pp.3-7, 1977.

H. Fredriksson, Solidification and casting of metals, Met. Soc. Lond, pp.131-138, 1979.

S. Schaeffler, Constitution Diagram for Stainless-steel Weld Metal. 2. Schaeffler Diagram, Met. Prog, vol.106, issue.1, pp.227-227, 1974.

D. J. Kotecki and T. A. Siewert, WRC-1992 constitution diagram for stainless steel weld metals: a modification of the WRC-1988 diagram, Weld. J, vol.71, issue.5, pp.171-178, 1992.

O. Hammer and U. Svensson, Solidification and casting of metals, Met. Soc. Lond, vol.401, 1979.

P. L. Ferrandini and C. T. Rios, Solute segregation and microstructure of directionally solidified austenitic stainless steel, Materials Science and Engineering: A, vol.435, issue.436, pp.139-144, 2006.
DOI : 10.1016/j.msea.2006.07.024

J. A. Brooks, A. Thompson, and J. Williams, A Fundamental Study of the Beneficial Effects of Delta Ferrite in Reducing Weld Cracking, Weld. J, vol.63, pp.71-83, 1984.

J. W. Elmer, S. M. Allen, and T. W. Eagar, Microstructural development during solidification of stainless steel alloys, Metallurgical Transactions A, vol.16, issue.4, pp.2117-2131, 1989.
DOI : 10.1007/BF02650298

M. Bobadilla, J. Lacaze, and G. Lesoult, Influence des conditions de solidification sur le d??roulement de la solidification des aciers inoxydables aust??nitiques, Journal of Crystal Growth, vol.89, issue.4, pp.531-544, 1988.
DOI : 10.1016/0022-0248(88)90216-3

J. W. Elmer, S. M. Allen, and T. W. Eagar, The influence of cooling rate on the ferrite content of stainless steel alloys, Proceedings of the 2nd International Conference on Trends in Welding Research, pp.14-18, 1989.

J. A. Brooks and A. W. Thompson, Microstructural development and solidification cracking susceptibility of austenitic stainless steel welds, International Materials Reviews, vol.233, issue.11, pp.16-44, 1991.
DOI : 10.2207/qjjws1943.41.1306

H. Fredriksson, The solidification sequence in an 18-8 stainless steel, investigated by directional solidification, Metallurgical Transactions, vol.188, issue.11, pp.2989-2997, 1972.
DOI : 10.1007/BF02652872

Y. S. Fu, Formation of a two-phase microstructure in Fe???Cr???Ni alloy during directional solidification, Journal of Crystal Growth, vol.311, issue.1, pp.132-136, 2008.
DOI : 10.1016/j.jcrysgro.2008.10.021

S. A. David, G. M. Goodwin, and D. N. Braski, Solidification behavior of austenitic stainless steel filler metals, pp.330-336, 1979.
DOI : 10.2172/5563513

J. C. Lippold and W. F. Savage, Solidification of austenitic stainless steel weldments: Part 2?The effect of alloy composition on ferrite morphology, Weld. J, vol.59, issue.2, pp.48-58, 1980.

Y. Arata, F. Matsuda, and S. Katayama, Solidification crack susceptibility in weld metals of fully austenitic stainless steels (Report II): Effect of ferrite and Mn on ductility properties of solidification brittleness, Trans. JWRI, vol.6, issue.1, pp.105-116, 1977.

Ö. Hammer and U. Svensson, Influence of steel composition on segregation and microstructure during solidification of stainless steels Solidification and Casting of Metals, 1977.

J. A. Brooks, J. C. Williams, and A. W. Thompson, Microstructural origin of the skeletal ferrite morphology of austenitic stainless steel welds, Metallurgical Transactions A, vol.10, issue.2, pp.1271-1281, 1983.
DOI : 10.1007/BF02664809

N. Suutala, T. Takalo, and T. Moisio, Ferritic-austenitic solidification mode in austenitic stainless steel welds, Metallurgical Transactions A, vol.3, issue.5, pp.717-725, 1980.
DOI : 10.1007/BF02661201

T. Takalo, N. Suutala, and T. Moisio, Influence of ferrite content on its morphology in some austenitic weld metals, Metallurgical Transactions A, vol.51, issue.10, pp.1591-1592, 1976.
DOI : 10.1007/BF02656405

W. W. Mullins and R. F. Sekerka, Stability of a Planar Interface During Solidification of a Dilute Binary Alloy, Journal of Applied Physics, vol.35, issue.2, pp.444-451, 1964.
DOI : 10.1063/1.1713333

S. A. David, Ferrite morphology and variations in ferrite content in austenitic stainless steel welds, Oak Ridge National Lab, 1981.

O. J. Pereira and J. Beech, Factors Influencing the Delta-Ferrite Content of Cast Austenitic Stainless Steels, Solidif. Technol. Foundry Cast House, pp.315-321, 1980.

P. R. Scheller, R. Flesch, and W. Bleck, Solidification Morphology and Microstructure Properties at Increased Cooling Rates for 18-8 Cr?Ni Stainless Steel, Adv. Eng. Mater, vol.1, pp.3-4, 1999.

T. Z. Kattamis and M. C. Flemings, Dendrite Morphology Microsegregation and homogenization of low-alloy steel, Trans. Metall. Soc. AIME, vol.233, issue.5, p.992, 1965.

M. Kajihara, C. Lim, and M. Kikuchi, Experimental Study on Dissolution of .ALPHA. Phase in .GAMMA./.ALPHA./.GAMMA. Diffusion Couples of the Fe-Cr-Ni System., ISIJ International, vol.33, issue.4, pp.498-507, 1993.
DOI : 10.2355/isijinternational.33.498

S. H. Kim, H. K. Moon, T. Kang, and C. S. Lee, Dissolution kinetics of delta ferrite in AISI 304 stainless steel produced by strip casting process, Materials Science and Engineering: A, vol.356, issue.1-2, pp.390-398, 2003.
DOI : 10.1016/S0921-5093(03)00152-7

V. S. Raghunathan, V. Seetharaman, S. Venkadesan, and P. Rodriguez, The influence of post weld heat treatments on the structure, composition and the amount of ferrite in type 316 stainless steel welds, Metallurgical Transactions A, vol.3, issue.11, pp.1683-1689, 1979.
DOI : 10.1007/BF02811701

M. Mclean, Microstructural instabilities in metallurgical systems???a review, Metal Science, vol.179, issue.3, pp.113-122, 1978.
DOI : 10.1179/030634575790444775

D. E. Coates, Diffusion controlled precipitate growth in ternary systems: II, Metallurgical Transactions, vol.40, issue.no. 4, pp.1077-1086, 1973.
DOI : 10.1007/BF02645611

DOI : 10.1139/p58-097

L. S. Darken, Diffusion of carbon in austenite with a discontinuity in composition, Trans AIME, vol.180, pp.430-438, 1948.

L. Onsager, Reciprocal Relations in Irreversible Processes. I., Physical Review, vol.37, issue.4, pp.405-426, 1931.
DOI : 10.1103/PhysRev.37.405

L. Onsager and R. M. Fuoss, Irreversible Processes in Electrolytes. Diffusion, Conductance and Viscous Flow in Arbitrary Mixtures of Strong Electrolytes, The Journal of Physical Chemistry, vol.36, issue.11, pp.2689-2778, 1931.
DOI : 10.1021/j150341a001

A. Schneider and G. Inden, Computer Simulation of Diffusion Controlled Phase Transformations, Contin. Scale Simul. Eng. Mater. Fundam.-Microstruct.-Process Appl, pp.1-36, 2004.
DOI : 10.1002/3527603786.ch1

A. Borgenstam, L. Höglund, J. Ågren, and A. Engström, DICTRA, a tool for simulation of diffusional transformations in alloys, Journal of Phase Equilibria, vol.30, issue.165, pp.269-280, 2000.
DOI : 10.1361/105497100770340057

H. Lukas and B. Sundman, Computational thermodynamics: the Calphad method, 2007.
DOI : 10.1017/CBO9780511804137

N. Saunders and A. P. Miodownik, CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, 1998.

M. Kajihara and M. Kikuchi, Analysis of dissolution of ?? phase in ??/??/?? diffusion couples of the Fe-Cr-Ni system using analytical solutions for semi-infinite diffusion couples, Acta Metallurgica et Materialia, vol.43, issue.2, pp.807-820, 1995.
DOI : 10.1016/0956-7151(94)00283-N

R. W. Heckel, A. J. Hickl, R. J. Zaehring, and R. A. Tanzilli, Transient growth of second phases during solution treatment, Metallurgical Transactions, vol.81, issue.10, pp.2565-2569, 1972.
DOI : 10.1007/BF02644230

R. A. Tanzilli and R. W. Heckel, Numerical solutions to finite diffusion-controlled 2- phase moving-interface problem, Trans. Metall. Soc. AIME, vol.242, pp.2313-2321, 1968.

E. Randich and J. I. Goldstein, Non-isothermal finite diffusion-controlled growth in ternary systems, Metallurgical Transactions A, vol.1, issue.3, pp.1553-1560, 1975.
DOI : 10.1007/BF02641967

W. D. Murray and F. Landis, Numerical and machine solutions of transient heatconduction problems involving melting or freezing, J. Heat Transf, vol.81, pp.106-112, 1959.

M. Hasebe and T. Nishizawa, Analysis and Synthesis of Phase Diagrams of the Fe-Cr- Ni, Fe-Cu-Mn and Fe-Cu-Ni Systems, Applications of Phase Diagrams in Metallurgy and ceramics, pp.911-939, 1978.

J. G. Duh and M. A. Dayananda, Interdiffusion in Fe-Ni-Cr Alloys at 100??C, Defect and Diffusion Forum, vol.39, pp.1-50, 1985.
DOI : 10.4028/www.scientific.net/DDF.39.1

M. Kajihara and M. Kikuchi, Numerical analysis of dissolution of ?? phase in ??/??/?? diffusion couples of the Fe???Cr???Ni system, Acta Metallurgica et Materialia, vol.41, issue.7, pp.2045-2059, 1993.
DOI : 10.1016/0956-7151(93)90374-2

J. Andersson, L. Höglund, B. Jönsson, and J. Agren, Computer simulation of multicomponent diffusional transformations in steel, International symposium on fundamentals and applications of ternary diffusion, 1990.
DOI : 10.1016/B978-0-08-040412-7.50023-2

J. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman, Thermo-Calc & DICTRA, computational tools for materials science, Calphad, vol.26, issue.2, pp.273-312, 2002.
DOI : 10.1016/S0364-5916(02)00037-8

M. Hillert and C. Qiu, A thermodynamic assessment of the Fe-Cr-Ni-C system, Metallurgical Transactions A, vol.33, issue.10, pp.2187-2198, 1991.
DOI : 10.1007/BF02664985

J. Fridberg, L. Torndahl, and M. Hillert, Diffusion in iron, Jernkontorets Ann, vol.153, issue.6, pp.263-276, 1969.

J. M. Vitek, S. A. Vitek, and S. A. David, Numerical modeling of diffusion-controlled phase transformations in ternary systems and application to the ferrite/austenite transformation in the Fe-Cr-Ni system, Metallurgical and Materials Transactions A, vol.71, issue.12, pp.2007-2025, 1995.
DOI : 10.1007/BF02670673

Z. Liu and G. Wang, Numerical Modeling of ??-Ferrite Dissolution Kinetics in Austenitic Stainless Steels, steel research international, vol.6, issue.7, pp.507-511, 2006.
DOI : 10.1002/srin.200606422

J. M. Vitek and S. A. Vitek, Modeling Phase Transformations in Ternary Systems: Ferrite Dissolution During Continuous Cooling, Thermal/Mechanical Processing of Steel Symposium, 1995.

S. Crusius, G. Inden, U. Knoop, L. Höglund, and J. Ågren, On the numerical treatment of moving boundary problems, Z. Für Met, vol.83, issue.9, pp.673-678, 1992.

B. Lee, Numerical simulation of diffusional reactions between multiphase alloys with different matrix phases, Scripta Materialia, vol.40, issue.5, pp.573-579, 1999.
DOI : 10.1016/S1359-6462(98)00497-7

B. Lee, Numerical procedure for simulation of multicomponent and multi-layered phase diffusion, Metals and Materials, vol.212, issue.1, pp.1-15, 1999.
DOI : 10.1007/BF03025998

B. Lee and K. H. Oh, Numerical treatment of the moving interface in diffusional reactions, Z Met, vol.87, issue.3, pp.195-204, 1996.

M. Bobadilla, Mode de solidification des aciers inoxydables du type AK21 et AS70: influence qualitative de la vitesse de refroidissement sur le déplacement des équilibres l/s et s/s, pp.95-57, 1995.

. Mob2 and . Mobility-database, Foundation of Computational Thermodynamics, Royal Institute of Technology

W. F. Gale and T. C. Totemeier, Smithells Metals Reference Book, 2003.

L. Thuinet and H. Combeau, A new model of microsegregation for macrosegregation computation in multicomponent steels. Part I: theoretical formulation and algorithm, Computational Materials Science, vol.45, issue.2, pp.294-304, 2009.
DOI : 10.1016/j.commatsci.2008.09.023

L. Thuinet, Solidification des aciers ternaires : modélisation de la microségrégation en croissance dendritique colonnaire, prise en compte de la réaction péritectique, 2005.

A. E. Veldman and K. Rinzema, Playing with nonuniform grids, Journal of Engineering Mathematics, vol.48, issue.1, pp.119-130, 1992.
DOI : 10.1007/BF00043231

J. Crank, The Mathematics of Diffusion, 1979.

P. J. Roache, Computational fluid dynamics, 1972.

M. Rappaz, M. Bellet, and M. Deville, Modélisation numérique en science et génie des matériaux, 1998.

A. N. Brooks and T. J. Hughes, Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.32, issue.1-3, pp.199-259, 1982.
DOI : 10.1016/0045-7825(82)90071-8

S. Kobayashi, A mathematical model for solute redistribution during dendritic solidification., Transactions of the Iron and Steel Institute of Japan, vol.28, issue.7, pp.535-542, 1988.
DOI : 10.2355/isijinternational1966.28.535

V. Raghavan, Cr-Fe-Ni (chromium-iron-nickel), Journal of Phase Equilibria, vol.23, issue.2, pp.261-264, 2003.
DOI : 10.1361/105497103770330604

S. Patankar, Numerical Heat Transfer and Fluid Flow, 1980.