L. Des, . Des, . Thermiques, L. En-effet, L. Côté et al., 33 TABLEAU 2-1 : ÉCARTS, pp.33-34, 1992.

J. Bryan, International Status of Thermal Error Research (1990), CIRP Annals - Manufacturing Technology, vol.39, issue.2, pp.645-656, 1990.
DOI : 10.1016/S0007-8506(07)63001-7

D. Chen, M. Bonis, F. Zhang, and D. Shen, Thermal error of a hydrostatic spindle, Precision Engineering, vol.35, issue.3, pp.512-520, 2011.
DOI : 10.1016/j.precisioneng.2011.02.005

D. Clarke, C. Mohtadi, and P. S. Tuffs, Generalized predictive control???Part I. The basic algorithm, Automatica, vol.23, issue.2, pp.137-148, 1987.
DOI : 10.1016/0005-1098(87)90087-2

M. Clerc, L'optimisation par essaim particulaire, 2005.

P. J. Coelho, Advances in the discrete ordinates and finite volume methods for the solution of radiative heat transfer problems in participating media, Journal of Quantitative Spectroscopy and Radiative Transfer, vol.145, pp.121-146, 2014.
DOI : 10.1016/j.jqsrt.2014.04.021

R. Dadson, S. Lewis, and G. Peggs, The pressure balance, 1982.

S. Dautin, Réduction de modèles thermiques de bâtiments : amélioration des techniques par modélisation des sollicitations métrologiques, Thèse de l'université de Poitiers, 1997.

D. Keyser, R. Van-cauwenberghe, and A. Décembre, Toward Robust Adaptive Control with Extended Predictive Control, Proc. 25th IEEE Conference on Decision and Control, 1986.

M. Dursapt, Aide mémoire Métrologie Dimensionnelle, 2009.

D. , Z. Yang, J. Yao, Z. Xue, and B. , Modeling aproach of regression orthogonal experiment design for the thermal error compensation of a CNC turning center, Journal of Materials Processing Technology, vol.202, issue.129, pp.619-623

E. Eitelberg, Comments on model reduction by minimizing the equation error, IEEE Transactions on Automatic Control, vol.27, issue.4, pp.1000-1002, 1982.
DOI : 10.1109/TAC.1982.1103048

E. Eitelberg, J. Balda, and R. Harley, A model reduction technique suitable for optimal controller design in high-order power systems, Electric Power Systems Research, pp.51-62, 1987.
DOI : 10.1016/0378-7796(87)90060-5

Y. Favennec, Y. Rouizi, and D. Petit, On the use of reduced models obtained through identification for feedback optimal control problems in a heat convection???diffusion problem, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.17-20, pp.1193-1201, 2010.
DOI : 10.1016/j.cma.2009.12.009

E. Girault, D. Petit, and E. Videcoq, Identification of Low-Order Models and Their Use for Solving Inverse Boundary Problems, Boca Raton, 2011.

M. Girault, Résolution de problèmes inverses en thermique par modèles réduits : applications en conduction non linéaire et en convection forcée, Thèse de l'université de Poitiers, 2003.

M. Girault, Estimation of time-varying pollutant emission rates in a ventilated enclosure: inversion of a reduced model obtained by experimental application of the modal identification method, Inverse Problems, vol.24, issue.1, p.22, 2008.
DOI : 10.1088/0266-5611/24/1/015021

URL : https://hal.archives-ouvertes.fr/hal-00423959

M. Girault and D. Petit, Resolution of linear inverse forced convection problems using model reduction by the Modal Identification Method: application to turbulent flow in parallel-plate duct, International Journal of Heat and Mass Transfer, vol.47, issue.17-18, pp.17-18, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.04.001

URL : https://hal.archives-ouvertes.fr/hal-00132596

M. Girault and D. Petit, Identification methods in nonlinear heat conduction. Part I: Model reduction, International Journal of Heat and Mass Transfer, vol.48, issue.1, pp.105-118, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.06.032

URL : https://hal.archives-ouvertes.fr/hal-00017512

M. Girault and D. Petit, Identification methods in nonlinear heat conduction. Part II: inverse problem using a reduced model, International Journal of Heat and Mass Transfer, vol.48, issue.1, pp.119-133, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.06.033

URL : https://hal.archives-ouvertes.fr/hal-00017512

M. Girault and E. Videcoq, Temperature regulation and tracking in a MIMO system with a mobile heat source by LQG control with a low order model, Control Engineering Practice, vol.21, issue.3, pp.333-349, 2013.
DOI : 10.1016/j.conengprac.2012.11.001

M. Girault, E. Videcoq, and D. Petit, Estimation of time-varying heat sources through inversion of a low order model built with the Modal Identification Method from in-situ temperature measurements, International Journal of Heat and Mass Transfer, vol.53, issue.1-3, pp.1-3, 2010.
DOI : 10.1016/j.ijheatmasstransfer.2009.09.040

R. Hachette, Réduction de modèle thermique par identification : utilisation pour des conditions aux limites variables. Couplage à un modèle détaillé, 1995.

Z. Haitao, Y. Jianguo, and J. Shen, Simulation of thermal behavior of a CNC machine tool spindle, International Journal of Machine Tools and Manufacture, vol.47, issue.6, pp.1003-1010, 2007.
DOI : 10.1016/j.ijmachtools.2006.06.018

W. Hao, Thermal error optimization modeling and real-time compensation on a CNC turning center, Journal of Materials Processing Technology, vol.207, issue.1-3, pp.172-179, 2007.
DOI : 10.1016/j.jmatprotec.2007.12.067

K. H. Huebner, D. L. Dewhirst, D. E. Smith, and T. G. Byrom, The Finite Element Method for Engineers, 2001.

M. Janicki, G. De-mey, and A. Napieralski, Application of Green's functions for analysis of transient thermal states in electronic circuits, Microelectronics Journal, vol.33, issue.9, pp.733-738, 2002.
DOI : 10.1016/S0026-2692(02)00057-5

C. Jean-louis, Mesures sans contact -Méthodes magnétiques et capacitives, 2003.

F. Joly, O. Quemener, and A. Neveu, Modal Reduction of an Advection-Diffusion Model Using a Branch Basis, Numerical Heat Transfer, Part B: Fundamentals, vol.1, issue.5, pp.1-20, 2008.
DOI : 10.1016/0045-7825(82)90071-8

URL : https://hal.archives-ouvertes.fr/hal-01179999

L. Lahousse, Contribution à la construction de machines de grande précision géométrique : le concept d'information dans l'amélioration des performances des machines. s.l, Thèse de doctorat Ecole National Supérieure des Arts et Métiers, 2005.

R. Leach, Fundamental principles of Engineering Nanotechnology, 2009.

S. Leleu, Contribution à l'évaluation des angles Conception, réalisation et validation d'un plateau pivotant de très haute précision : vers une nouvelle référence angulaire nationale, 2000.

L. Litz, Order reduction of linear state space models via optimal approximation of the nondominant modes, pp.171-184, 1981.

B. Lopez-walle, M. Gauthier, and C. Nicolas, Dynamic modelling for thermal micro-actuators using thermal networks, International Journal of Thermal Sciences, vol.49, issue.11, pp.2108-2116, 2010.
DOI : 10.1016/j.ijthermalsci.2010.06.012

URL : https://hal.archives-ouvertes.fr/hal-00541949

J. Maciejowski, Predictive control with constraints, 2001.

. Mahr, Catalogue générale de Mahr, 2014.

S. Marshall, An approximate method for reducing the order of a linear system, Control, vol.10, pp.642-643, 1966.

R. Methekar, V. Prasad, and R. Gudi, Dynamic analysis and linear control strategies for proton exchange membrane fuel cell using a distributed parameter model, Journal of Power Sources, vol.165, issue.1, pp.152-170, 2007.
DOI : 10.1016/j.jpowsour.2006.11.047

. Mitutoyo, Catalogue général Mitutoyo, 2014.

B. .. Moore, Principal component analysis in linear systems: Controllability, observability, and model reduction, IEEE Transactions on Automatic Control, vol.26, issue.1, pp.17-32, 1981.
DOI : 10.1109/TAC.1981.1102568

A. Mosaffa, F. Talati, H. Basirat-tabrizi, and M. Rosen, Analytical modeling of PCM solidification in a shell and tube finned thermal storage for air conditioning systems, Energy and Buildings, vol.49, pp.356-361, 2012.
DOI : 10.1016/j.enbuild.2012.02.053

M. Neugebauer, A new comparator for measurement of diameter and form of cylinders, spheres and cubes under clean-room conditions, Measurement Science and Technology, vol.8, issue.8, pp.849-856, 1997.
DOI : 10.1088/0957-0233/8/8/003

A. Neveu and K. Khoury, Réduction d'un modèle thermique non linéaire par modes de branche. Application à un câble chauffant, pp.115-124, 2000.

A. Neveu and K. F. Khoury, Simulation de la conduction non lin??aire en r??gime variable: d??composition sur les modes de branche, International Journal of Thermal Sciences, vol.38, issue.4, pp.289-304, 1999.
DOI : 10.1016/S1290-0729(99)80095-7

N. En, Thermomètres à résistance de platine industriels et capteur thermométriques en platine, La plaine Saint-Denis: Association Française de Normalisation (AFNOR), 2008.

H. Nouira, A. Vissière, M. Damak, and J. David, Investigation of the influence of the main error sources on the capacitive displacement measurements with cylindrical artefacts, Precision Engineering, vol.37, issue.3, pp.721-727, 2013.
DOI : 10.1016/j.precisioneng.2013.02.005

A. Oulefki and A. Neveu, R??duction par amalgame modal d'un mod??le thermique, Journal de Physique III, vol.3, issue.2, pp.303-320, 1993.
DOI : 10.1051/jp3:1993133

V. Pashkis and H. D. Baker, A method for determining unsteady state heat transfer by means of an electrical analogue, ASME Transactions, vol.64, pp.105-112, 1942.

R. Pasquetti and D. Petit, Analyse modale d'un processus de diffusion thermique: identification par thermographie infra-rouge, International Journal of Heat and Mass Transfer, vol.31, issue.3, pp.487-496, 1988.
DOI : 10.1016/0017-9310(88)90030-0

M. Pesare, A. Giorgio, and A. G. Perri, An analytical method for the thermal layout optimisation of multilayer structure solid-state devices. Solid-State Electronics, pp.511-517, 2001.

D. Petit, Réduction de modèles de connaissance et identification de modèles d'ordre réduit, 1991.

D. Petit, R. Hachette, and D. Veyret, A modal identification method to reduce a high order model : application to heat conduction modelling, International Journal of Modelling and Simulation, vol.17, pp.242-250, 1997.

B. Poyet, Conception d'un microscope à force atomique métrologique, Thèse de l'universités de Versaille Saint-Quentin en Yvelines, 2010.

O. Quemener, F. Joly, and A. Neveu, On-line heat flux identification from a rotating disk at variable speed, Int. J. Heat and Mass Transfer, vol.53, pp.7-8, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01176753

O. Quemener, F. Joly, and A. Neveu, The generalized amalgam method for modal reduction, International Journal of Heat and Mass Transfer, vol.55, issue.4, pp.1197-1207, 2012.
DOI : 10.1016/j.ijheatmasstransfer.2011.09.043

URL : https://hal.archives-ouvertes.fr/hal-01176725

O. Quemener, A. Neveu, and E. Videcoq, A specific reduction method for the branch modal formulation: Application to a highly non-linear configuration, International Journal of Thermal Sciences, vol.46, issue.9, pp.890-907, 2007.
DOI : 10.1016/j.ijthermalsci.2006.11.011

R. Ramesh, M. Mannan, and A. A. Poo, Thermal error measurement and modelling in machine tools. Part II. Hybrid Bayesian Network???support vector machine model, International Journal of Machine Tools and Manufacture, vol.43, issue.4, pp.405-419, 2003.
DOI : 10.1016/S0890-6955(02)00264-X

. Renishaw, Advaced homodyne interferometry : a guide for OEM design engineers, 2006.

J. Richalet, A. Rault, J. Testud, and J. Papon, Model predictive heuristic control, Automatica, vol.14, issue.5, pp.413-428, 1978.
DOI : 10.1016/0005-1098(78)90001-8

J. Rossiter, Model based predictive control. A pratical approach, Boca Raton, 2003.

Y. Rouizi, Réduction de modèle par identification en convection forcée pour des systèmes soumis à des conditions aux limites thermiques instationnaires : application à l'écoulement le long d'une marche avec contrôle thermique par retour d'état, 2010.

Y. Rouizi, M. Girault, Y. Favennec, and D. Petit, Model reduction by the Modal Identification Method in forced convection: Application to a heated flow over a backward-facing step, International Journal of Thermal Sciences, vol.49, issue.8, pp.1354-1368, 2010.
DOI : 10.1016/j.ijthermalsci.2010.02.011

J. F. Sacadura, Initiation aux transferts thermiques, 1993.

H. Simonsen, Iodine-stabilized extended cavity diode laser at ??=633 nm, IEEE Transactions on Instrumentation and Measurement, vol.46, issue.2, pp.141-144, 1997.
DOI : 10.1109/19.571796

A. H. Slocum, Precision Machine Design, 1992.

G. D. Smith, Numerical Solution of Partial Differential Equations: Finite Difference Methods, 1985.

O. Smith, A controller to overcome dead time, ISA, vol.6, issue.2, pp.28-33, 1959.

A. Srivastava and J. Ziegert, Prediction of Thermally Induced Time-Variant Machine Tool Error Maps Using a Fuzzy ARTMAP neural network, International Journal of Machine Tools and Manufacture, vol.119, issue.4, pp.623-630, 1997.

K. R. Vaddina, Thermal modeling and analysis of advanced 3D stacked structures, Procedia Engineering, vol.30, pp.248-257, 2012.
DOI : 10.1016/j.proeng.2012.01.858

J. Van-der-sanden and T. Ruijl, Thermal transient analysis of complex systems using structured lumped mass models, Proceedings of the Topical Meeting : Thermal Effects in Precision Systems, 2007.

J. Ventura, Réduction de modèle en convection forcée par des méthodes d'identification, 2010.

E. Videcoq, Problèmes inverses en diffusion thermique instationnaire : résolution par représentation d'état et apport de la réduction de modèle, Thèse de l'université de Poitiers, 1999.

E. Videcoq, Parametric investigation of Linear Quadratic Gaussian and Model Predictive Control approaches for thermal regulation of a high precision geometric measurement machine, Applied Thermal Engineering, vol.78, pp.720-730, 2015.
DOI : 10.1016/j.applthermaleng.2014.10.080

E. Videcoq, Comparison of two nonlinear model reduction techniques: the modal identification method and the branch eigenmodes reduction method. Numerical Heat Transfer, Part B, vol.49, issue.6, pp.537-558, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00118803

E. Videcoq, M. Girault, and A. Piteau, Thermal control via state feedback using a low order model built from experimental data by the Modal Identification Method, International Journal of Heat and Mass Transfer, vol.55, issue.5-6, pp.1679-1694, 2012.
DOI : 10.1016/j.ijheatmasstransfer.2011.11.023

E. Videcoq and D. Petit, Model reduction for the resolution of multidimensional inverse heat conduction problems, International Journal of Heat and Mass Transfer, vol.44, issue.10, pp.1899-1911, 2001.
DOI : 10.1016/S0017-9310(00)00239-8

E. Videcoq, D. Petit, and A. Piteau, Experimental modelling and estimation of time varying thermal sources, International Journal of Thermal Sciences, vol.42, issue.3, pp.255-265, 2003.
DOI : 10.1016/S1290-0729(02)00025-X

URL : https://hal.archives-ouvertes.fr/hal-00131176

A. Vissière, Mesure de cylindricité de très haute exactitude : Développement d'une nouvelle machine de référence, Thèse de doctorat de l'Ecole Nationale Supérieure des Arts et Métiers, 2013.

A. Vissière, A newly received cylinder measuring machine and methods that eliminate the spindle errors, Measurement Science and Technology, vol.23, issue.9, 2012.

A. Vissière, Concept and architecture of a new apparatus for cylindrical form measurement with a nanometric level of accuracy, Measurement Science and Technology, vol.23, issue.9, p.9, 2012.
DOI : 10.1088/0957-0233/23/9/094014

J. Vyroubal, Compensation of machine tool thermal deformation in spindle axis direction based on decomposition method. Precision Engineering, pp.121-127, 2012.

A. Vissiere, H. Nouira, M. Damak, O. Gibaru, and J. David, A newly conceived cylinder measuring machine and methods that eliminate the spindle errors, Measurement Science and Technology, vol.23, issue.9, 2012.
DOI : 10.1088/0957-0233/23/9/094015

URL : https://hal.archives-ouvertes.fr/hal-01084382

H. Nouira, A. Vissiere, M. Damak, and J. David, Investigation of the influence of the main error sources on the capacitive displacement measurements with cylindrical artefacts, Precision Engineering, vol.37, issue.3, pp.37-721, 2013.
DOI : 10.1016/j.precisioneng.2013.02.005

M. R. Hajmohammadi, V. A. Abianeh, M. Moezzinajafabadi, and M. Daneshi, Fork-shaped highly conductive pathways for maximum cooling in a heat generating piece, Applied Thermal Engineering, vol.61, issue.2, pp.61-228, 2013.
DOI : 10.1016/j.applthermaleng.2013.08.001

E. F. Camacho, F. R. Rubio, M. Berenguel, and L. Valenzuela, A survey on control schemes for distributed solar collector fields. Part I: Modeling and basic control approaches, Solar Energy, vol.81, issue.10, pp.1240-1251, 2007.
DOI : 10.1016/j.solener.2007.01.002

E. F. Camacho, F. R. Rubio, M. Berenguel, and L. Valenzuela, A survey on control schemes for distributed solar collector fields. Part II: Advanced control approaches, Solar Energy, vol.81, issue.10, pp.1252-1272, 2007.
DOI : 10.1016/j.solener.2007.01.001

B. N. Datta, Numerical Methods for Linear Control Systems e Design and Analysis, 2004.

E. F. Camacho and C. , Bordons, Model Predictive Control, 2007.

Q. Qi and S. Deng, Multivariable control of indoor air temperature and humidity in a direct expansion (DX) air conditioning (A/C) system, Build, pp.44-1659, 2009.

D. Edouard, P. Dufour, and H. Hammouri, Observer based multivariable control of a catalytic reverse flow reactor: comparison between LQR and MPC approaches, Computers & Chemical Engineering, vol.29, issue.4, pp.29-851, 2005.
DOI : 10.1016/j.compchemeng.2004.09.018

URL : https://hal.archives-ouvertes.fr/hal-00091715

M. Bako-sov-a and J. Oravec, Robust model predictive control for heat exchanger network, Appl. Therm. Eng, pp.73-922, 2014.

D. Zheng and K. A. Hoo, System identification and model-based control for distributed parameter systems, Computers & Chemical Engineering, vol.28, issue.8, pp.1361-1375, 2004.
DOI : 10.1016/j.compchemeng.2003.09.035

E. Aggelogiannaki, H. Sarimveis, and D. Koubogiannis, Model predictive temperature control in long ducts by means of a neural network approximation tool, Applied Thermal Engineering, vol.27, issue.14-15, pp.27-2363, 2007.
DOI : 10.1016/j.applthermaleng.2007.03.005

M. Girault, D. Petit, and E. Videcoq, Identification of low-order models and their use for solving inverse boundary problems, Thermal Measurements and Inverse Techniques, 2011.

E. Videcoq and D. Petit, Model reduction for the resolution of multidimensional inverse heat conduction problems, International Journal of Heat and Mass Transfer, vol.44, issue.10, 2001.
DOI : 10.1016/S0017-9310(00)00239-8

M. Girault and E. Videcoq, Temperature regulation and tracking in a MIMO system with a mobile heat source by LQG control with a low order model, Control Engineering Practice, vol.21, issue.3, pp.333-349, 2013.
DOI : 10.1016/j.conengprac.2012.11.001

E. Videcoq, M. Girault, and D. Petit, Low order modelling and closed-loop thermal control of a ventilated plate subject to a heat source disturbance, Journal of Physics: Conference Series, vol.395, p.395, 2012.
DOI : 10.1088/1742-6596/395/1/012068

. Fig, Case 2: effect of penalization coefficient l and model order n on regulation results for N p ¼

E. Videcoq, Parametric investigation of Linear Quadratic Gaussian and Model Predictive Control approaches for thermal regulation of a high precision geometric measurement machine, Applied Thermal Engineering, vol.78, pp.720-730, 2015.
DOI : 10.1016/j.applthermaleng.2014.10.080