, 60 2.2. Experiments without preheating of Cu substrate Investigation of wetting using conventional camera, 62 2.3.3. Investigation of wetting using the rapid camera. Wetting of Cu by the liquid Sn-7.8wt.%Cu alloy............................. 64 2.3.3.2. Wetting of Cu by liquid Sn, p.67
, Wetting behaviour of lead-free Sn-based alloys on Cu and Ni substrates Materials Science and Engineering: A Contact angle measurements of Sn-Ag and Sn-Cu lead-free solders on copper substrates Dependence of Sn grain morphology of Sn-Ag-Cu solder on solidification temperature Rapid formation of intermetallic compounds interdiffusion in the Cu-Sn and Ni-Sn systems, Acta metallurgica et materialia, pp.108-112, 1990.
, Heterogeneous nucleation of ?Sn on NiSn 4, PdSn 4 and PtSn 4 Etude et caractérisation d'interconnexions intermétalliques à partir de plots de cuivre et d'alliages Sn-Ag-Cu pour l'empilement tridimensionnel de composants actifs, Journal of applied physics Acta Materialia J, vol.67, issue.71 10, pp.7313-7322, 2014.
, First steps in the spreading of a liquid droplet On the wetting of the intermetallics Cu6Sn5 and Cu3Sn by Pb-Sn alloys. The Metal Science of Joining Contact angles Growth kinetic studies of Cu?Sn intermetallic compound and its effect on shear strength of LCCC SMT solder joints, Effect of intermetallic compound thickness on shear strength of 25 µm diameter Cupillars 016301. 12. 183-189. 13, pp.37-47, 1948.
, The Cu? Pb (Copper-Lead) system. Bulletin of Alloy Phase Diagrams Interfacial reactions in Ag-Sn/Cu couples Current stressing-induced growth of Cu 3 Sn in Cu/Sn/Cu solder joints Formation of nearly void-free Cu3Sn intermetallic joints using nanotwinned Cu metallization Low temperature compound formation in CuSn thin film couples Experimental evidence for nucleation during thin?film reactions Contribution à l'étude des mécanismes de mouillage réactif (Doctoral dissertation, Institut National Polytechnique de Grenoble-INPG). 23 Progress in modelling of chemical-reaction limited wetting Progress in modelling of chemical-reaction limited wetting SGTE data for pure elements, Determination of reactive wetting properties of Sn, Sn?Cu, Sn?Ag, and Sn?Pb alloys using a wetting balance technique. Journal of materials research 26. [Dolgopolov_2007]: Dolgopolov, N. A, pp.1420-1428, 1982.
, Penetration of liquid tin along grain boundaries and triple grain-boundary junctions of aluminum, Russian Journal of Non-Ferrous Metals, vol.48, issue.27, pp.126-130, 1996.
, Etude des reactions a l'etat solide dans des multicouches Al/Co: apllication a la formation de films minces quasicristallins (Doctoral dissertation). 30 Experimental study of the influence of interfacial energies and reactivity on wetting in metal/oxide systems. Metallurgical and materials transactions A, pp.599-605, 1994.
, Progress in understanding and modeling reactive wetting of metals on ceramics 152-160. 33 Size effect in heterogeneous nucleation The Cu?Sn phase diagram, Part I: new experimental results Nucleation kinetics of Cu6Sn5 by reaction of molten tin with a copper substrate Thickening kinetics of interfacial Cu6Sn5 and Cu3Sn layers during reaction of liquid tin with solid copper Wetting: statics and dynamics On the mechanism of the binary Cu/Sn solder reaction, Wettability at high temperatures 36. [Gagliano_2003]: Gagliano, pp.572-576, 1958.
, Initial formation of CuSn intermetallic compounds between molten SnAgCu solder and Cu substrate Growth kinetics of planar binary diffusion couples:''Thin?film case''versus''bulk cases The Kinetics of Phase Formation in the Diffusion Zone During Interdiffusion. General Theory Kinetic theory of flux-driven ripening, Evolution of CuSn intermetallics between molten SnAgCu solder and Cu substrate, pp.4291-4297, 1982.
, Diffusion-controlled solid state reactions: in alloys, thin-films, and nanosystems, 1987.
, Thin solid films Kinetics of formation of silicides: A review Some effects of substrate roughness on wettability, Cinétique de formation de composés intermétalliques dans les couches minces de Cu/Sn, pp.109-119, 1981.
, Possibility of a shape phase transition for solidification of tin at scallop-like surfaces of Cu6Sn5 The wettability of industrial surfaces: contact angle measurements and thermodynamic analysis Unidirectional growth of microbumps on (111)-oriented and nanotwinned copper The effect of microstructural and geometrical features on the reliability of ultrafine flip chip microsolder joints Size and substrate effects upon undercooling of Pb-free solders Size effect model on kinetics of interfacial reaction between Sn-xAg-yCu solders and Cu substrate Scientific reports, 4. 56, Undercooling of Sn?Ag?Cu alloys: solder balls and solder joints solidification.International Journal of Materials Research Microsystems, Packaging, Assembly and Circuits Technology Conference Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: Before and after aging, pp.874-878, 1975.
, Influence of crystallography on aspects of solid-solid nucleation theory, Metallurgical Transactions A, vol.6, issue.58, pp.911-919, 1975.
, 607- 620. 59 Study of the undercooling of Pb-free, flip-chip solder bumps and in situ observation of solidification process Mechanical properties of Pb-free SnAg solder joints, microelectronic applications. IBM Journal of Research and Development Direct evidence for a Cu-enriched region at the boundary between Cu 6 Sn 5 and Cu 3 Sn during Cu/Sn reaction, pp.557-560, 2007.
, Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening Effects of cooling speed on microstructure and tensile properties of Sn?Ag?Cu alloys Investigation of the Dynamic Reactive Wetting of Sn-Ag-Cu Solder Alloys on Ni On the kinetics of interface-diffusion-controlled peritectoid reactions, Cu on Cu and Electroless Ni Substrate in Premelting Soldering Process 16027. 64. [Kim_2002Au Coated Cu Substrates. Materials transactions, pp.1254-1259, 1994.
, 69 Intrinsic and interdiffusion in Cu-Sn system Solid state diffusion in Cu?Sn and Ni?Sn diffusion couples with flip-chip scale dimensions, Wetting transitions in reactive metal/oxide systems. Scripta metallurgica et materialia, pp.1127-1132, 1993.
, Crystal structure modulations in ?-Cu5Sn4 Interfacial reactions between lead-free solders and common base materials, Mechanisms of reactive wetting: the question of triple line configuration. Acta materialia, pp.3079-3085, 1995.
, Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders, 2002.
, Effects of the melt state on the microstructure of a Sn???3.5%Ag solder at different cooling rates, Applied Surface Science, vol.258, issue.15, pp.291-301, 2006.
DOI : 10.1016/j.apsusc.2012.02.058
, Effect of intermetallic compound formation on electrical properties of Cu/Sn interface during thermal treatment Phase growth competition in solid/liquid reactions between copper or Cu3Sn compound and liquid tin-based solder The interphases formed during the very early stage liquid solder/metal substrate interaction of the soldering process, Metallurgy and kinetics of liquid-solid interfacial reaction during lead-free soldering. Materials transactions, pp.317-325, 2004.
, A model of the growth of intermediate phase islands in multilayers A study of solute diffusion in liquid tin Wetting in soldering and microelectronics, Microstructure evolution during solid state reactions of Nb/Al multilayers. Acta materialia Microelectronic engineering 388-395. 83. [Matsumoto_2005]: Matsumoto, Effect of cooling rate on microstructure and shear strength of pure Sn, pp.2813-2826, 1960.
, Diffusion in solids: fundamentals, methods, materials, diffusion-controlled processes Springer Science & Business Media, Journal of electronic materials, vol.33, issue.86, pp.1355-1362, 2005.
, Kinetics of diffusion-limited spreading of sessile drops in reactive wetting, Electronic Components and Technology Conference, 2005. Proceedings. 55th, pp.415-420, 1997.
DOI : 10.1016/S1359-6462(96)00431-9
, Microstructure control in Sn-0.7 mass% Cu alloys Reaction-diffusion in the Cu?Sn system, The amorphous origin and the nucleation of intermetallic compounds formed at the interface during the soldering of Sn-3, pp.2419-2425, 1975.
, Zn solder on Cu substrate 103513. 92 Degradation of Cu 6 Sn 5 intermetallic compound by pore formation in solid?liquid interdiffusion Cu/Sn microbump interconnects Formation and growth of intermetallic compound Cu6Sn5 at early stages in lead-free soldering Concurrent nucleation, formation and growth of two intermetallic compounds (Cu 6 Sn 5 and Cu 3 Sn) during the early stages of lead-free soldering Intermetallic growth and Kirkendall effect manifestations in Cu/Sn and Au/Sn diffusion couples: Dedicated to Prof. Dr. Helmut Mehrer on the occasion of his 65th birthday Effects of fine size lead-free solder ball on the interfacial reactions and joint reliability Modeling of Phase Competition and Diffusion Zone Morphology Evolution at Initial Stages of Reaction Diffusion Model of Lateral Growth Stage during Reactive Phase Formation Nucleation in undercooled liquids, Cu on a Cu substrate. Applied Physics Letters 2574-2582. 94. [Park_2012]: Park, Electronic Components and Technology Conference 2010 Proceedings 60th Diffusion parameters and growth mechanism of phases in the Cu-Sn system. Metallurgical and Materials Transactions A, pp.91-117, 1912.
, Reactive Interdiffusion, Materials Science Forum, vol.155, issue.156, pp.15-30, 1994.
DOI : 10.4028/www.scientific.net/MSF.155-156.15
, A diffusion-kinetic model for predicting solder/conductor interactions in high density interconnections, Metallurgical and Materials Transactions A, issue.12, pp.29-2951, 1998.
, Nonreactive spreading at high temperature: Molten metals and oxides on molybdenum Early stages of dissolutive spreading, Physical Review E Scripta Materialia, vol.76, issue.412, pp.62-934, 2007.
, Rapid Cu6Sn5 growth at liquid Sn/solid Cu interfaces, Scripta Materialia, vol.100, pp.17-20, 2015.
DOI : 10.1016/j.scriptamat.2014.11.039
, The Cu-Sn (copper-tin) system.Bulletin of Alloy Phase Diagrams, pp.278-287, 1990.
, Reactive wetting, evolution of interfacial and bulk IMCs and their effect on mechanical properties of eutectic Sn???Cu solder alloy, Advances in Colloid and Interface Science, vol.166, issue.1-2, pp.87-118, 2011.
DOI : 10.1016/j.cis.2011.05.005
, Nucleation of a liquid on aerosol nanoparticles, EPL (Europhysics Letters), vol.83, issue.6, p.66002, 2008.
DOI : 10.1209/0295-5075/83/66002
, The spreading of a liquid over a rough solid, Discussions of the Faraday Society, vol.3, pp.16-22, 1948.
DOI : 10.1039/df9480300016
, Factors affecting wettability and bond strength of solder joint couples, Pure and Applied Chemistry, vol.79, issue.10, pp.79-1755, 2007.
DOI : 10.1351/pac200779101755
, Effects of reactive diffusion on stress evolution in Cu???Sn films, Scripta Materialia, vol.51, issue.2, pp.167-170, 2004.
DOI : 10.1016/j.scriptamat.2004.03.032
, Investigation of IMC Thickness Effect on the Lead-free Solder Ball Attachment Strength: Comparison between Ball Shear Test and Cold Bump Pull Test Results, 56th Electronic Components and Technology Conference 2006, p.56, 2006.
DOI : 10.1109/ECTC.2006.1645804
, Interfacial reactions in molten Sn/Cu and molten In/Cu couples, Metallurgical and Materials Transactions B, vol.55, issue.1, pp.927-934, 1997.
DOI : 10.1007/s11663-997-0020-8
, Preferred orientation relationship between Cu6Sn5 scallop-type grains and Cu substrate in reactions between molten Sn-based solders and Cu, Journal of Applied Physics, vol.102, issue.6, pp.63511-63511, 2007.
DOI : 10.1063/1.2776002
, Dramatic morphological change of scallop-type Cu6Sn5 formed on (001) single crystal copper in reaction between molten SnPb solder and Cu, Applied Physics Letters, vol.91, issue.5, pp.91-51907, 2007.
DOI : 10.1063/1.2761840
, Size distribution and morphology of Cu 6 Sn 5 scallops in wetting reaction between molten solder and copper, Acta Materialia, issue.5, pp.56-1075, 2008.
, Solid state interfacial reactions in electrodeposited Cu/Sn couples, Transactions of Nonferrous Metals Society of China, vol.20, issue.1, pp.90-96, 2010.
DOI : 10.1016/S1003-6326(09)60102-3
, The spreading of silicone oil drops on horizontal surfaces, Journal of Physics D: Applied Physics, vol.12, issue.9, 1979.
DOI : 10.1088/0022-3727/12/9/009
, Interdiffusion and reaction in bimetallic Cu-Sn thin films, Acta Metallurgica, vol.21, issue.4, pp.347-354, 1973.
DOI : 10.1016/0001-6160(73)90190-9
, Kinetics of interfacial reaction in bimetallic Cu???Sn thin films, Acta Metallurgica, vol.30, issue.5, pp.947-952, 1982.
DOI : 10.1016/0001-6160(82)90201-2
, Cu/Sn interfacial reactions: thin-film case versus bulk case, Materials Chemistry and Physics, vol.46, issue.2-3, pp.217-223, 1996.
DOI : 10.1016/S0254-0584(97)80016-8
, Recent advances on electromigration in very-large-scale-integration of interconnects, Journal of Applied Physics, vol.94, issue.9, pp.5451-5473, 2003.
DOI : 10.1063/1.1611263
, Solder joint technology (pp. 211-288) Transition from flip chip solder joint to 3D IC microbump: Its effect on microstructure anisotropy, Microelectronics Reliability, vol.132, issue.531, pp.2-6, 2007.
, Flip-chip bonding alignment accuracy enhancement using self-aligned interconnection elements to realize low-temperature construction of ultrafine-pitch copper bump interconnections Formation of crystal nuclei in liquid metals, Electronic Components and Technology Conference (ECTC), pp.2014-64, 1950.
, Solid-state intermetallic compound layer growth between copper and 95, 2004.
DOI : 10.1007/s11664-004-0026-9
, Solid-State Reactions between Cu(Ni) Alloys and Sn, Journal of Electronic Materials, vol.38, issue.9, pp.36-1355, 2007.
DOI : 10.1007/s11664-007-0251-0
, The evaluation of data obtained with diffusion couples of binary single-phase and multiphase systems, Acta Metallurgica, vol.17, issue.2, pp.99-107, 1969.
DOI : 10.1016/0001-6160(69)90131-X
, Reactive wetting of solders on Cu and Cu6Sn5/Cu3Sn/Cu substrates using wetting balance, Scripta Materialia, vol.55, issue.9, pp.55-823, 2006.
DOI : 10.1016/j.scriptamat.2006.07.017
, Modeling reactive wetting, Acta Materialia, vol.46, issue.9, pp.3247-3264, 1998.
DOI : 10.1016/S1359-6454(97)00487-4
, Effects of cooling rate on microstructure and microhardness of lead-free Sn-3.0 Ag-0.5 Cu solder Resistance of solid surfaces to wetting by water, Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2012 13th International Conference on, pp.453-456, 1936.
, Effect of intermetallic and Kirkendall voids growth on board level drop reliability for SnAgCu lead-free BGA solder joint, 2006.
, Microstructure evolution of eutectic Sn-Ag solder joints, Journal of Electronic Materials, vol.16, issue.8, pp.23-765, 1994.
DOI : 10.1007/BF02651371
, Interfacial reactions of eutectic Sn3.5Ag and pure tin solders with Cu substrates during liquid-state soldering, Intermetallics, vol.25, pp.86-94, 2012.
, On the root cause of Kirkendall voiding in Cu3Sn, Journal of Materials Research, vol.23, issue.03, pp.455-466, 2011.
DOI : 10.1007/s10800-008-9618-z
, The atomic-scale studies of the behavior of the crystal dissolution in a molten metal, Chemical Physics Letters, vol.418, issue.4-6, pp.433-436, 2006.
DOI : 10.1016/j.cplett.2005.11.017
, Effect of deposit thickness during electroplating on Kirkendall voiding at Sn/Cu joints, Materials Letters, vol.128, pp.9-11, 2014.
DOI : 10.1016/j.matlet.2014.04.091
, Wetting process and interfacial characteristic of Sn?3.0 Ag?0.5 Cu on different substrates at temperatures ranging from 503K to 673K, Applied Surface Science, issue.11, pp.257-4877, 2011.
, Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability Spreading Kinetics of Liquid Solders over an Intermetallic Solid Surface, Journal of applied physics Part Journal of electronic materials, vol.97, issue.389, pp.4508-154, 2005.
, Wetting Kinetics of Eutectic Lead and Lead-Free Solders: Spreading over the Cu Surface, Journal of Electronic Materials, vol.29, issue.2, pp.284-291, 2009.
DOI : 10.1007/s11664-008-0590-5
, Morphologies, orientation relationships and evolution of Cu6Sn5 grains formed between molten Sn and Cu single crystals, Acta Materialia, vol.56, issue.11, pp.56-2649, 2008.
DOI : 10.1016/j.actamat.2008.01.055
, 5 2.5) Germination hétérogène pendant la cristallisation de Sn liquide ou des alliages liquides Sn-Ag-Cu: solidification des billes de brasure et des joints de brasure
, 3) Installation expérimentale d'immersion rapide d'un solide dans un bain liquide
, 23 6.1) Compétition de croissance de couches interfaciales : systèmes Cu/Sn liquide et Cu 3 Sn, 23 6.2) Différences entre les réactions interfaciales dans les couples Cu/Sn solide et Cu/Sn liquide métastable à la même température: Rôle de l'état physique de, p.23
, Etude et caractérisation d'interconnexions intermétalliques à partir de plots de cuivre et d'alliages Sn-Ag-Cu pour l'empilement tridimensionnel de composants actifs Determination of reactive wetting properties of Sn, Sn?Cu, Sn?Ag, and Sn?Pb alloys using a wetting balance technique SGTE data for pure elements. Calphad Wettability at high temperatures Thickening kinetics of interfacial Cu6Sn5 and Cu3Sn layers during reaction of liquid tin with solid copper Kinetic theory of flux-driven ripening Criteria of kinetic suppression of lateral growth of intermediate phases Possibility of a shape phase transition for solidification of tin at scallop-like surfaces of Cu6Sn5, Heterogeneous nucleation of ?Sn on NiSn 4, PdSn 4 and PtSn 4. Acta Materialia 6. [Gagliano_2003]: Gagliano, pp.56-68, 1975.
, Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening Investigation of the Dynamic Reactive Wetting of Sn-Ag-Cu Solder Alloys on Ni (P)Au Coated Cu Substrates Metallurgy and kinetics of liquid-solid interfacial reaction during lead-free soldering Phase growth competition in solid/liquid reactions between copper or Cu3Sn compound and liquid tin-based solder Wetting in soldering and microelectronics, Differences in the interfacial reaction between Cu substrate and metastable supercooled liquid Sn?Cu solder or solid Sn?Cu solder at 222° C: Experimental results versus theoretical model calculations, pp.911-919, 1975.
, Reaction Intermetallic growth and Kirkendall effect manifestations in Cu/Sn and Au/Sn diffusion couples: Dedicated to Prof. Dr. Helmut Mehrer on the occasion of his 65th birthday Early stages of dissolutive spreading The Cu-Sn (copper-tin) system.Bulletin of Alloy Phase Diagrams Decoration criteria for surface steps Factors affecting wettability and bond strength of solder joint couples Effects of reactive diffusion on stress evolution in Cu?Sn films Size distribution and morphology of Cu 6 Sn 5 scallops in wetting reaction between molten solder and copper Solder joint technology (pp. 211-288) Transition from flip chip solder joint to 3D IC microbump: Its effect on microstructure anisotropy Flip-chip bonding alignment accuracy enhancement using self-aligned interconnection elements to realize low-temperature construction of ultrafine-pitch copper bump interconnections, -diffusion in the Cu?Sn system.Transactions of the Japan Institute of Metals Electronic Components and Technology Conference (ECTC) Reactive wetting of solders on Cu and Cu 6 Sn 5 /Cu 3 Sn/Cu substrates using wetting balance. Scripta materialia, pp.251-273, 1970.