J. D. Hooladay, J. Hu, D. L. King, and Y. Wang, An overview of hydrogen production technologies, Catalysis Today, vol.139, issue.4, pp.244-260, 2009.
DOI : 10.1016/j.cattod.2008.08.039

D. Marcelo, A. Dell, and . Era, Economical electrolyser solution, International Journal of Hydrogen Energy, vol.33, issue.12, pp.3041-3044, 2008.
DOI : 10.1016/j.ijhydene.2008.02.078

S. C. Singhal and K. Kendall, High temperature solid oxide fuel cells: Fundamentals, design and applications. Elsivier, 2007.

L. Conceição, L. Dessemond, E. Djurado, and M. Souza, Thin films of La0.7Sr0.3MnO3????? dip-coated on Fe???Cr alloys for SOFC metallic interconnect, International Journal of Hydrogen Energy, vol.38, issue.35, pp.15335-15347, 2013.
DOI : 10.1016/j.ijhydene.2013.09.048

O. Yamamoto, Solid oxide fuel cells: fundamental aspects and prospects, Electrochimica Acta, vol.45, issue.15-16, pp.2423-2435, 2000.
DOI : 10.1016/S0013-4686(00)00330-3

E. Guire, Solid oxide fuel cells, 2003.

S. C. Singhal, Solid oxide fuel cells The Electrochemical Society Interface, 2007.

Á. Varga and S. Mounse, Fuel cells Available: http://www.doitpoms.ac.uk/tlplib/fuel-cells/printall, php, 2006.

W. Z. Zhu and S. C. Deevi, Development of interconnect materials for solid oxide fuel cells, Materials Science and Engineering: A, vol.348, issue.1-2, pp.227-243, 2003.
DOI : 10.1016/S0921-5093(02)00736-0

J. Wu and X. Liu, Recent Development of SOFC Metallic Interconnect, Journal of Materials Science & Technology, vol.26, issue.4, pp.293-305, 2010.
DOI : 10.1016/S1005-0302(10)60049-7

J. W. Fergus, Metallic interconnects for solid oxide fuel cells, Materials Science and Engineering: A, vol.397, issue.1-2, pp.271-283, 2005.
DOI : 10.1016/j.msea.2005.02.047

X. Chen, P. Hou, C. Jacobson, S. Visco, and L. Dejonghe, Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties, Solid State Ionics, vol.176, issue.5-6, pp.5-6, 2005.
DOI : 10.1016/j.ssi.2004.10.004

J. R. Davis and E. , ASM specialty handbook: Stainless steels, 1994.

M. Sathitrajinda and . Steels, Bangkok: The Engineering Institute of Thailand Under H.M. The King's Patronage, 1986.

A. Yamauchi, K. Kurokawa, and H. Takahashi, Evaporation of Cr2O3 in atmospheres containing H2O, Oxidation of Metals, vol.59, issue.5/6, pp.517-527, 2003.
DOI : 10.1023/A:1023671206976

C. Gindorf, L. Singheiser, and K. Hilpert, Vaporisation of chromia in humid air, Journal of Physics and Chemistry of Solids, vol.66, issue.2-4, pp.384-387, 2005.
DOI : 10.1016/j.jpcs.2004.06.092

P. Kofstad, High temperature corrosion, 1988.

J. W. Morris, Defects in Crystals, Materials Science, pp.76-107, 2007.

R. M. Saburaphael, Imperfections in solids ? Stoichiometric and impurity defects Available: https://amazingsolids.wordpress.com/2013/06/15/imperfections-in-solids- stoichiometric-and-impurity-defects, 2013.

D. J. Young, High temperature oxidation and corrosion of metals, 2008.

D. Caplan and M. Cohen, The Volatilization of Chromium Oxide, Journal of The Electrochemical Society, vol.108, issue.5, pp.438-442, 1961.
DOI : 10.1149/1.2428106

K. Hilpert, D. Das, M. Miller, D. H. Peck, and R. Wei, Chromium Vapor Species over Solid Oxide Fuel Cell Interconnect Materials and Their Potential for Degradation Processes, Journal of The Electrochemical Society, vol.143, issue.11, pp.3642-3647, 1996.
DOI : 10.1149/1.1837264

H. Asteman, J. E. Svensson, and L. G. Johansson, Evidence for chromium evaporation influencing the oxidation of 304L: The effect of temperature and flow rate, Oxid. Met, vol.57, pp.3-4, 2002.

H. Asteman, J. Svensson, M. Norell, and L. Johansson, Influence of Water Vapor and Flow Rate on the High-Temperature Oxidation of 304L ; Effect of Chromium Oxide Hydroxide Evaporation, Oxidation of Metals, vol.54, issue.1/2, pp.11-26, 2000.
DOI : 10.1023/A:1004642310974

E. J. Opila, D. L. Myers, N. S. Jacobson, I. M. Nielsen, D. F. Johnson et al., (g), The Journal of Physical Chemistry A, vol.111, issue.10, pp.1971-1980, 2007.
DOI : 10.1021/jp0647380

M. Stanislowski, E. Wessel, K. Hilpert, T. Markus, and L. Singheiser, Chromium Vaporization from High-Temperature Alloys, Journal of The Electrochemical Society, vol.154, issue.4, p.295, 2007.
DOI : 10.1149/1.2434690

H. Falk-windisch, J. E. Svensson, and J. Froitzheim, The effect of temperature on chromium vaporization and oxide scale growth on interconnect steels for Solid Oxide Fuel Cells, Journal of Power Sources, vol.287, pp.25-35, 2015.
DOI : 10.1016/j.jpowsour.2015.04.040

H. Falk-windisch, J. Froitzheim, and J. E. Svensson, Influence of Chromium Evaporation and Oxidation on Interconnect Steels at 650-850??C, ECS Transactions, vol.57, issue.1, pp.2225-2233, 2013.
DOI : 10.1149/05701.2225ecst

W. Wongpromrat, H. Thaikan, W. Chandra-ambhorn, and S. Chandra-ambhorn, Chromium Vaporisation from AISI 441 Stainless Steel Oxidised in Humidified Oxygen, Oxidation of Metals, vol.158, issue.111, pp.5-6, 2013.
DOI : 10.1007/s11085-013-9379-x

R. Sachitanand, M. Sattari, J. E. Svensson, and J. Froitzheim, Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects, International Journal of Hydrogen Energy, vol.38, issue.35, pp.15328-15334, 2013.
DOI : 10.1016/j.ijhydene.2013.09.044

C. S. Tedmon, The Effect of Oxide Volatilization on the Oxidation Kinetics of Cr and Fe-Cr Alloys, Journal of The Electrochemical Society, vol.113, issue.8, p.766, 1966.
DOI : 10.1149/1.2424115

R. Bateni, Available: http://www.mie.utoronto.ca/labs/sofc/reza_bateni, html, 2015.

H. Yokokawa, T. Horita, N. Sakai, K. Yamaji, M. E. Brito et al., Thermodynamic considerations on Cr poisoning in SOFC cathodes, Solid State Ionics, vol.177, issue.35-36, pp.3193-3198, 2006.
DOI : 10.1016/j.ssi.2006.07.055

Q. Fu, D. Sebold, F. Tietz, and H. Buchkremer, Electrodeposited cobalt coating on Crofer22APU steels for interconnect applications in solid oxide fuel cells, Solid State Ionics, vol.192, issue.1, pp.376-382, 2011.
DOI : 10.1016/j.ssi.2010.03.010

R. Lacey, A. Pramanick, J. C. Lee, J. I. Jung, B. Jiang et al., Evaluation of Co and perovskite Cr-blocking thin films on SOFC interconnects, Solid State Ionics, vol.181, issue.27-28, pp.1294-1302, 2010.
DOI : 10.1016/j.ssi.2010.07.007

J. Froitzheim, S. Canovic, M. Nikumaa, R. Sachitanand, L. G. Jahansson et al., Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects, Journal of Power Sources, vol.220, pp.317-227, 2012.
DOI : 10.1016/j.jpowsour.2012.06.092

X. Li, J. W. Lee, and B. N. Popov, Performance studies of solid oxide fuel cell cathodes in the presence of bare and cobalt coated E-brite alloy interconnects, Journal of Power Sources, vol.187, issue.2, pp.356-362, 2009.
DOI : 10.1016/j.jpowsour.2008.11.018

A. Magrasò, H. Falk-windisch, J. Froitzheim, J. E. Svensson, and R. Haugsrud, Reduced long term electrical resistance in Ce/Co-coated ferritic stainless steel for solid oxide fuel cell metallic interconnects, International Journal of Hydrogen Energy, vol.40, issue.27, pp.8579-8585, 2015.
DOI : 10.1016/j.ijhydene.2015.04.147

S. Canovic, J. Froitzheim, R. Sachitanand, M. Nikumaa, M. Halvarsson et al., Oxidation of Co- and Ce-nanocoated FeCr steels: A microstructural investigation, Surface and Coatings Technology, vol.215, pp.62-74, 2013.
DOI : 10.1016/j.surfcoat.2012.08.096

H. Falk-windisch, J. Froitzheim, and J. E. Svensson, Influence of Chromium Evaporation and Oxidation on Interconnect Steels at 650-850??C, ECS Transactions, vol.57, issue.1, pp.2225-2233, 2013.
DOI : 10.1149/05701.2225ecst

S. H. Kim, J. Y. Huh, J. H. Jun, J. H. Jun, and J. Favergeon, Thin elemental coatings of yttrium, cobalt, and yttrium/cobalt on ferritic stainless steel for SOFC interconnect applications, Current Applied Physics, vol.10, issue.2, pp.86-90, 2010.
DOI : 10.1016/j.cap.2009.11.049

S. Molin, B. Kusz, M. Gazda, and P. Jasinski, Protective coatings for stainless steel for SOFC applications, Journal of Solid State Electrochemistry, vol.50, issue.11, pp.1695-1700, 2009.
DOI : 10.1007/s10008-008-0635-y

M. Stanislowski, J. Froitzheim, L. Niewolak, W. J. Quadakkers, K. Hilpert et al., Reduction of chromium vaporization from SOFC interconnectors by highly effective coatings, Journal of Power Sources, vol.164, issue.2, pp.578-589, 2007.
DOI : 10.1016/j.jpowsour.2006.08.013

J. G. Grolig, J. Froitzheim, and J. E. Svensson, Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Oxidation performance and chromium evaporation, Journal of Power Sources, vol.248, pp.1007-1013, 2014.
DOI : 10.1016/j.jpowsour.2013.08.089

H. Falk-windisch, M. Sattari, J. E. Svensson, and J. Froitzheim, Chromium vaporization from mechanically deformed pre-coated interconnects in Solid Oxide Fuel Cells, Journal of Power Sources, vol.297, pp.217-223, 2015.
DOI : 10.1016/j.jpowsour.2015.07.085

S. C. Singhal and M. Dokiya, Solid oxide fuel cells (SOFC VI, Proceedings of The Sixth International Symposium, Proceedings Volume 99-19, 1999.

J. H. Kim, R. H. Song, and S. H. Hyun, Effect of slurry-coated LaSrMnO on the electrical property of Fe?Cr alloy for metallic interconnect of SOFC, Solid State Ionics, vol.174, issue.1-4, pp.185-191, 2004.
DOI : 10.1016/j.ssi.2004.07.032

B. Hua, J. Pu, F. Lu, J. Zhang, B. Chi et al., Development of a Fe???Cr alloy for interconnect application in intermediate temperature solid oxide fuel cells, Journal of Power Sources, vol.195, issue.9, pp.2782-2788, 2010.
DOI : 10.1016/j.jpowsour.2009.08.077

P. D. Jablonski and D. E. Alman, Oxidation resistance of novel ferritic stainless steels alloyed with titanium for SOFC interconnect applications, Journal of Power Sources, vol.180, issue.1, pp.433-439, 2008.
DOI : 10.1016/j.jpowsour.2008.02.010

S. Lee, C. L. Chu, M. J. Tsai, and J. Lee, High temperature oxidation behavior of interconnect coated with LSCF and LSM for solid oxide fuel cell by screen printing, Applied Surface Science, vol.256, issue.6, pp.1817-1824, 2010.
DOI : 10.1016/j.apsusc.2009.10.013

H. Kurokawa, C. P. Jacobson, L. C. Dejonghe, and S. J. Visco, Chromium vaporization of bare and of coated iron???chromium alloys at 1073??K, Solid State Ionics, vol.178, issue.3-4, pp.287-296, 2007.
DOI : 10.1016/j.ssi.2006.12.010

C. L. Chu, J. Lee, T. H. Lee, and Y. N. Cheng, Oxidation behavior of metallic interconnect coated with La???Sr???Mn film by screen painting and plasma sputtering, International Journal of Hydrogen Energy, vol.34, issue.1, pp.422-434, 2009.
DOI : 10.1016/j.ijhydene.2008.09.091

M. Palcut, L. Mikkelsen, K. Neufeld, M. Chen, R. Knibbe et al., Improved oxidation resistance of ferritic steels with LSM coating for high temperature electrochemical applications, International Journal of Hydrogen Energy, vol.37, issue.9, pp.8087-8094, 2012.
DOI : 10.1016/j.ijhydene.2011.11.138

S. Guillou, C. Desgranges, and S. Chevalier, Influence of a Coating on Oxidation Resistance and Resistivity of a Chromia Former Alloy for High Temperature Vapor Electrolysis Application, Oxidation of Metals, vol.56, issue.2, pp.341-361, 2013.
DOI : 10.1007/s11085-012-9319-1

M. R. Ardigo, I. Popa, S. Chevalier, V. Parry, A. Galerie et al., Coated interconnects development for high temperature water vapour electrolysis: Study in anode atmosphere, International Journal of Hydrogen Energy, vol.38, issue.36, pp.15910-15916, 2013.
DOI : 10.1016/j.ijhydene.2013.10.026

T. Brylewski, J. Dabek, K. Przybylski, J. Morgiel, and M. Rekas, Screen-printed (La,Sr)CrO3 coatings on ferritic stainless steel interconnects for solid oxide fuel cells using nanopowders prepared by means of ultrasonic spray pyrolysis, Journal of Power Sources, vol.208, pp.86-95, 2012.
DOI : 10.1016/j.jpowsour.2012.02.015

K. Przybylski and T. Brylewski, Interface Reactions between Conductive Ceramic Layers and Fe-Cr Steel Substrates in SOFC Operating Conditions, MATERIALS TRANSACTIONS, vol.52, issue.3, pp.345-351, 2011.
DOI : 10.2320/matertrans.MB201013

V. Sauchuk, S. Megel, E. Girdauskaite, N. Trofimenko, M. Kusnezoff et al., Influence of protective layers on SOFC operation, Russian Journal of Electrochemistry, vol.47, issue.5, pp.522-530, 2011.
DOI : 10.1134/S1023193511050107

Y. Fang, C. Wu, X. Duan, S. Wang, and Y. Chen, High-temperature oxidation process analysis of MnCo2O4 coating on Fe???21Cr alloy, International Journal of Hydrogen Energy, vol.36, issue.9, pp.5611-5616, 2011.
DOI : 10.1016/j.ijhydene.2011.01.130

T. Uehara, N. Yasuda, M. Okamoto, and Y. Baba, Effect of Mn???Co spinel coating for Fe???Cr ferritic alloys ZMG232L and 232J3 for solid oxide fuel cell interconnects on oxidation behavior and Cr-evaporation, Journal of Power Sources, vol.196, issue.17, pp.7251-7256, 2011.
DOI : 10.1016/j.jpowsour.2010.11.078

J. W. Stevenson, Z. G. Yang, G. G. Xia, Z. Nie, and J. D. Templeton, Long-term oxidation behavior of spinel-coated ferritic stainless steel for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.231, pp.256-263, 2013.
DOI : 10.1016/j.jpowsour.2013.01.033

L. Chen, E. Y. Sun, J. Yamanis, and N. Magdefrau, Oxidation Kinetics of Mn[sub 1.5]Co[sub 1.5]O[sub 4]-Coated Haynes 230 and Crofer 22 APU for Solid Oxide Fuel Cell Interconnects, Journal of The Electrochemical Society, vol.157, issue.6, pp.931-942, 2010.
DOI : 10.1149/1.3391820

W. Wei, W. Chen, and D. G. Ivey, Oxidation resistance and electrical properties of anodically electrodeposited Mn???Co oxide coatings for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.186, issue.2, pp.428-434, 2009.
DOI : 10.1016/j.jpowsour.2008.09.114

M. R. Bateni, P. Wei, X. Deng, and A. Petric, Spinel coatings for UNS 430 stainless steel interconnects, Surface and Coatings Technology, vol.201, issue.8, pp.4677-4684, 2007.
DOI : 10.1016/j.surfcoat.2006.10.011

M. R. Ardigo, I. Popa, S. Chevalier, V. Parry, A. Galerie et al., Effect of coatings on a comercial stainless steel for SOFC interconnect application in anode atmosphere, ESC Trans, vol.57, issue.1, pp.4490-44952301, 2013.

A. Kruk, M. Stygar, and T. Brylewski, Mn???Co spinel protective???conductive coating on AL453 ferritic stainless steel for IT-SOFC interconnect applications, Journal of Solid State Electrochemistry, vol.38, issue.464, pp.993-1003, 2013.
DOI : 10.1007/s10008-012-1952-8

K. Wang, Y. Liu, and J. W. Fergus, Interactions Between SOFC Interconnect Coating Materials and Chromia, Journal of the American Ceramic Society, vol.397, issue.40, pp.4490-4495, 2011.
DOI : 10.1111/j.1551-2916.2011.04749.x

G. Jalivand and M. A. Faghihi-sani, ???Fe doped Ni???Co spinel protective coating on ferritic stainless steel for SOFC interconnect application???, International Journal of Hydrogen Energy, vol.38, issue.27, pp.12007-12014, 2011.
DOI : 10.1016/j.ijhydene.2013.06.105

W. Zhang, J. Pu, B. Chi, and L. Jian, NiMn2O4 spinel as an alternative coating material for metallic interconnects of intermediate temperature solid oxide fuel cells, Journal of Power Sources, vol.196, issue.13, pp.5591-5594, 2011.
DOI : 10.1016/j.jpowsour.2011.02.075

J. J. Choi, J. Ryu, B. D. Hahn, W. H. Yoon, B. K. Lee et al., Oxidation behavior of ferritic steel alloy coated with LSM???YSZ composite ceramics by aerosol deposition, Journal of Alloys and Compounds, vol.492, issue.1-2, pp.488-495, 2010.
DOI : 10.1016/j.jallcom.2009.11.146

V. I. Gorokhovsky, P. E. Gannon, J. Wallace, D. Vanvorous, C. Bowman et al., Evaluation of SOFC Interconnects Made of Ferritic Steels with Nano-Structured Oxi-Ceramic Protective Coatings Deposited by the LAFAD Process, Journal of The Electrochemical Society, vol.158, issue.5, pp.526-535, 2011.
DOI : 10.1149/1.3559156

A. Balland, P. Gannon, M. Deibert, S. Chevalier, G. Caboche et al., Investigation of La2O3 and/or (Co,Mn)3O4 deposits on Crofer22APU for the SOFC interconnect application, Surface and Coatings Technology, vol.203, issue.20-21, pp.3291-3296, 2009.
DOI : 10.1016/j.surfcoat.2009.04.017

URL : https://hal.archives-ouvertes.fr/hal-00461976

X. Liu, C. Johnson, C. Li, J. Xu, and C. Cross, Developing TiAlN coatings for intermediate temperature solid oxide fuel cell interconnect applications, International Journal of Hydrogen Energy, vol.33, issue.1, pp.189-186, 2008.
DOI : 10.1016/j.ijhydene.2007.09.007

L. Antoni, J. Mougin, A. Galerie, and M. Dupeux, Influence of Ti and Nb on the competition between oxidation kinetics and oxide adhesion on 18 % Cr stainless steels, C032- P142byLAntoni.pdf. [Accessed, 2001.

J. R. Davis and E. , ASM specialty handbook: Stainless steels, 1994.

J. Hong, Y. Shin, and H. W. Lee, Characterization of corrosion resistance in a ferritic stainless steel stabilized with Ti addition, Int. J. Electrochem. Sci, vol.9, pp.7325-7334, 2014.

L. X. Wang, C. J. Song, F. M. Sun, L. J. Li, and Q. J. Zhai, Microstructure and mechanical properties of 12wt.% Cr ferritic stainless steel with Ti and Nb dual stabilization, Materials & Design, vol.30, issue.1, pp.49-56, 2009.
DOI : 10.1016/j.matdes.2008.04.040

M. P. Sello, The Laves phase embrittment of ferritic stainless steel type AISI 441, 2009.

Z. Yang, G. Xia, C. Wang, Z. Nie, J. Templeton et al., Investigation of iron???chromium???niobium???titanium ferritic stainless steel for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.183, issue.2, pp.660-667, 2008.
DOI : 10.1016/j.jpowsour.2008.05.037

H. S. Seo, D. W. Yun, and K. Y. Kim, Oxidation behavior of ferritic stainless steel containing Nb, Nb???Si and Nb???Ti for SOFC interconnect, International Journal of Hydrogen Energy, vol.38, issue.5, pp.2432-2442, 2013.
DOI : 10.1016/j.ijhydene.2012.12.073

G. B. Hunter and T. W. Eager, Ductility of stabilized ferritic stainless steel welds, Metallurgical Transactions A, vol.60, issue.11, pp.1-6, 1980.
DOI : 10.1007/BF02660625

J. F. Shackelford and W. Alexander, Materials science and engineering handbook, 2001.

H. Ali-löytty, P. Jussila, T. Juuti, L. P. Karjalainen, A. A. Zakharov et al., Influence of precipitation on initial high-temperature oxidation of Ti???Nb stabilized ferritic stainless steel SOFC interconnect alloy, International Journal of Hydrogen Energy, vol.37, issue.19, pp.14528-14535, 2012.
DOI : 10.1016/j.ijhydene.2012.07.097

X. Hou and B. T. Jones, Inductively Coupled Plasma/Optical Emission Spectrometry Analytical Chemistry, pp.9468-9485, 2000.

C. B. Boss and K. J. , Fredeen, Concepts, Instrumentation and Techniques in Inductively Coupled Plasma Optical Emission Spectrometry, 1997.

C. Stadtländer, Scanning electron microscopy and transmission electron microscopy of mollicutes: Challenges and opportunities, Mod. Res. Educ. Top. Microsc, pp.122-131, 2007.

P. J. Goodhew, J. Humphreys, and R. Beanland, Electron microscopy and analysis, 2001.

B. Voutou and E. Stefanaki, Electron microscopy : The Basics, 2008.

A. W. Skilbred and H. Fjeld, Scanning electron microscope (SEM) Available: http://www.uio.no/studier, 2009.

G. Berthomé, Surface analysis: An introduction to XPS

J. Laun, M. Chen, and W. Hu, Synthesis, Characterization and Photocatalytic Activity of New Photocatalyst ZnBiSbO4 under Visible Light Irradiation, International Journal of Molecular Sciences, vol.15, issue.6, pp.9459-9480, 2014.
DOI : 10.3390/ijms15069459

A. Publ, Basics of X-ray Diffraction, 1999.

K. Daikarn, Available: http://www.mfu.ac.th/center/stic/index.php/x-ray-analysis-instrument-menu/item, p.16, 2012.

T. Thompson, Fundamentals of Raman spectroscopy Available: http://faculty.kfupm.edu.sa/PHYS/zhyamani/teaching/Coupled_Oscillations/lectures, 2000.

C. Hess, Raman spectroscopy : Basic principles and applications, 2006.

H. H. Lou and Y. Huang, Electroplating Encyclopedia of chemical processing, PapersBook_Plating_ECHP.pdf, 2006.

K. Osborne, Electroplating Available: http://nzic.org.nz/ChemProcesses/metals/8G.pdf. [Accessed: 13, Metal Protection Ltd., Auckland, 2011.

J. Wu, C. D. Johnson, R. S. Gemmen, and X. Liu, The performance of solid oxide fuel cells with Mn???Co electroplated interconnect as cathode current collector, Journal of Power Sources, vol.189, issue.2, pp.1106-1113, 2009.
DOI : 10.1016/j.jpowsour.2008.12.079

J. Wu, Y. Jiang, C. Johnson, and X. Liu, DC electrodeposition of Mn???Co alloys on stainless steels for SOFC interconnect application, Journal of Power Sources, vol.177, issue.2, pp.376-385, 2008.
DOI : 10.1016/j.jpowsour.2007.11.075

H. H. Lou and Y. Huang, Electroplating Encyclopedia of chemical processing, PapersBook_Plating_ECHP.pdf, 2006.

W. Wongpromrat, Chromium evaporation from stainless steel interconnect in solid oxide feul cells and its protection King Mongkut's Institute of Technology Ladkrabang, 2012.

W. Wongpromrat, H. Thaikan, W. Chandra-ambhorn, and S. Chandra-ambhorn, Chromium Vaporisation from AISI 441 Stainless Steel Oxidised in Humidified Oxygen, Oxidation of Metals, vol.158, issue.111, pp.5-6, 2013.
DOI : 10.1007/s11085-013-9379-x

D. J. Young, High temperature oxidation and corrosion of metals, 2008.

S. C. Kuiry, S. Seal, S. K. Bose, and S. K. Roy, Effect of Surface Preparation On the High-temperature Oxidation Behaviour of AISI 316 Stainless Steel., ISIJ International, vol.34, issue.7, pp.599-606, 1994.
DOI : 10.2355/isijinternational.34.599

Y. Kato, M. Ito, Y. Kato, and O. Furukimi, Effect of Si on Precipitation Behavior of Nb-Laves Phase and Amount of Nb in Solid Solution at Elevated Temperature in High Purity 17%Cr-0.5%Nb Steels, MATERIALS TRANSACTIONS, vol.51, issue.9, pp.1531-1535, 2010.
DOI : 10.2320/matertrans.M2010112

H. Ali-löytty, P. Jussila, and M. Valden, Optimization of the electrical properties of Ti???Nb stabilized ferritic stainless steel SOFC interconnect alloy upon high-temperature oxidation: The role of excess Nb on the??interfacial oxidation at the oxide???metal interface, International Journal of Hydrogen Energy, vol.38, issue.2, pp.1039-1051, 2013.
DOI : 10.1016/j.ijhydene.2012.10.087

B. Kuhn, M. Talik, L. Niewolak, J. Zurek, H. Hattendorf et al., Development of high chromium ferritic steels strengthened by intermetallic phases, Materials Science and Engineering: A, vol.594, pp.372-380, 2014.
DOI : 10.1016/j.msea.2013.11.048

J. Froitzheim, G. H. Meier, L. Niewolak, P. J. Ennis, H. Hattendorf et al., Development of high strength ferritic steel for interconnect application in SOFCs, Journal of Power Sources, vol.178, issue.1, pp.163-173, 2008.
DOI : 10.1016/j.jpowsour.2007.12.028

P. D. Jablonski, C. J. Cowen, and J. S. Sears, Exploration of alloy 441 chemistry for solid oxide fuel cell interconnect application, Journal of Power Sources, vol.195, issue.3, pp.813-820, 2010.
DOI : 10.1016/j.jpowsour.2009.08.023

J. Froitzheim, S. Canovic, M. Nikumaa, R. Sachitanand, L. G. Johansson et al., Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects, Journal of Power Sources, vol.220, pp.217-227, 2012.
DOI : 10.1016/j.jpowsour.2012.06.092

J. G. Grolig, J. Froitzheim, and J. Svensson, Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Oxidation performance and chromium evaporation, Journal of Power Sources, vol.248, pp.1007-1013, 2014.
DOI : 10.1016/j.jpowsour.2013.08.089

J. Rufner, P. Gannon, P. White, M. Deibert, S. Teintze et al., Oxidation behavior of stainless steel 430 and 441 at 800??C in single (air/air) and dual atmosphere (air/hydrogen) exposures, International Journal of Hydrogen Energy, vol.33, issue.4, pp.1392-1398, 2008.
DOI : 10.1016/j.ijhydene.2007.12.067

Z. Yang, G. Xia, C. Wang, Z. Nie, J. Templeton et al., Investigation of iron???chromium???niobium???titanium ferritic stainless steel for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.183, issue.2, pp.660-667, 2008.
DOI : 10.1016/j.jpowsour.2008.05.037

C. Gindorf, L. Singheiser, and K. Hilpert, Vaporisation of chromia in humid air, Journal of Physics and Chemistry of Solids, vol.66, issue.2-4, pp.384-387, 2005.
DOI : 10.1016/j.jpcs.2004.06.092

M. Stanislowski, E. Wessel, K. Hilpert, T. Markus, and L. Singheiser, Chromium Vaporization from High-Temperature Alloys, Journal of The Electrochemical Society, vol.154, issue.4, p.295, 2007.
DOI : 10.1149/1.2434690

H. Kurokawa, C. Jacobson, L. Dejonghe, and S. Visco, Chromium vaporization of bare and of coated iron???chromium alloys at 1073??K, Solid State Ionics, vol.178, issue.3-4, pp.3-4, 2007.
DOI : 10.1016/j.ssi.2006.12.010

A. Galerie, M. R. Ardigo, P. Berthod, W. Chandra-ambhorn, S. Chevalier et al., Influence of water vapor on high-temperature oxidation of chromiaforming materials, French Activity on High Temperature Corrosion in Water Vapor. Materials Science Foundations, vol.76

C. Collins, J. Lucas, T. L. Buchanan, M. Kopczyk, P. E. Kayani et al., Chromium volatility of coated and uncoated steel interconnects for SOFCs, Surface and Coatings Technology, vol.201, issue.7, pp.4467-4470, 2006.
DOI : 10.1016/j.surfcoat.2006.08.053

G. R. Holcomb, Calculation of Reactive-evaporation Rates of Chromia, Oxidation of Metals, vol.523, issue.464, pp.3-4, 2008.
DOI : 10.1007/s11085-008-9091-4

Y. Madi, E. Salhi, F. Charlot, A. Galerie, and Y. Wouters, Influence of polishinginduced surface hardening on the adhesion of oxide scales grown on a ferritic stainless steel, Oxid. Met, vol.75, pp.3-4, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00640175

A. Galerie, S. Henry, Y. Wouters, M. Mermoux, J. Petit et al., Mechanisms of chromia scale failure during the course of 15-18Cr ferritic stainless steel oxidation in water vapour .pdf, Mater. High Temp, vol.21, issue.4, pp.105-112, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00333238

S. Henry, Influence de la vapeur d'eau sur l'oxydation a haute temparature du chrome et de quelques aciers inoxydables ferritiques stabilises, 2000.

A. Galerie, S. Henry, Y. Wouters, M. Mermoux, J. Petit et al., Mechanisms of chromia scale failure during the course of 15-18Cr ferritic stainless steel oxidation in water vapour, Mater. High Temp, vol.21, issue.4, pp.105-112, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00333238

S. Henry, Influence de la vapeur d'eau sur l'oxydation a haute temparature du chrome et de quelques aciers inoxydables ferritiques stabilises, 2000.

I. Antepara, I. Villarreal, L. M. Rodríguez-martínez, N. Lecanda, U. Castro et al., Evaluation of ferritic steels for use as interconnects and porous metal supports in IT-SOFCs, Journal of Power Sources, vol.151, issue.12, pp.103-107, 2005.
DOI : 10.1016/j.jpowsour.2005.02.084

J. Mougin, T. L. Bihan, and G. Lucazeau, High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy, Journal of Physics and Chemistry of Solids, vol.62, issue.3, pp.553-563, 2001.
DOI : 10.1016/S0022-3697(00)00215-8

P. Y. Hou, J. Ager, J. Mougin, and A. Galerie, Limitations and Advantages of Raman Spectroscopy for the Determination of Oxidation Stresses, Oxidation of Metals, vol.71, issue.3, pp.229-245, 2011.
DOI : 10.1007/s11085-011-9235-9

URL : https://hal.archives-ouvertes.fr/hal-00640174

B. D. Hosterman, Raman spectroscopic study of solid solution spinel oxides, 2011.

R. L. Farrow, P. L. Mattern, S. N. Laboratories, and S. Diego, Characterization of surface oxides by raman spectroscopy, Appl. Phys. Lett, vol.73, pp.353-358, 1980.

J. Birnie, C. Craggs, D. J. Gardiner, and P. R. Graves, Ex situ and in situ determination of stress distributions in chromium oxide films by raman microscopy, Corrosion Science, vol.33, issue.1, pp.1-12, 1992.
DOI : 10.1016/0010-938X(92)90014-T

J. Mougin, Tenue mécanique de couches d'oxyde thermiques générées sur le chrome et sur quelques aciers inoxydables ferritiques: Étude des contraintes et de d'adhérence, 2001.

D. Renusch, B. Veal, K. Natesan, and M. Grimsditch, Transient oxidation in Fe-Cr-Ni alloys: A Raman-scattering study, Oxidation of Metals, vol.129, issue.5-6, pp.5-6, 1996.
DOI : 10.1007/BF01048636

R. J. Anderson, Summary Abstract: Oxidation mechanisms of Fe???18Cr???3Mo: A Raman study, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.3, issue.3, p.1296, 1985.
DOI : 10.1116/1.573047

Y. Matsuda, S. Hinotani, and K. Yamanaka, Characterization of oxide layers on SUS410Ti stainless steel grown in low oxygen pressures by Raman spectroscopy, Tetsu to Hagane, vol.82, issue.3, pp.32-37, 1996.

K. Veena, V. K. Vaidyan, and P. Koshy, Characterization of ferrochromium thin films, Journal of Materials Science Letters, vol.57, issue.1, pp.80-82, 1989.
DOI : 10.1007/BF00720259

J. C. Hamilton and R. J. Anderson, Oxidation of Fe-18Cr-3Mo : an in-situ Raman study, High Temp. Sci, vol.19, pp.307-321, 1985.

D. J. Gardiner, C. J. Littleton, K. M. Thomas, and K. N. Strafford, Distribution and characterization of high temperature air corrosion products on iron-chromium alloys by Raman microscopy, Oxidation of Metals, vol.19, issue.1-2, pp.57-72, 1987.
DOI : 10.1007/BF00656729

Z. Yang, G. Xia, C. Wang, Z. Nie, J. Templeton et al., Investigation of iron???chromium???niobium???titanium ferritic stainless steel for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.183, issue.2, pp.660-667, 2008.
DOI : 10.1016/j.jpowsour.2008.05.037

H. Yan, H. Bi, X. Li, and Z. Xu, Microstructure and texture of Nb+Ti stabilized ferritic stainless steel, Materials Characterization, vol.59, issue.12, pp.1741-1746, 2008.
DOI : 10.1016/j.matchar.2008.03.018

H. Yan, H. Bi, X. Li, and Z. Xu, Precipitation and mechanical properties of Nb-modified ferritic stainless steel during isothermal aging, Materials Characterization, vol.60, issue.3, pp.204-209, 2009.
DOI : 10.1016/j.matchar.2008.09.001

H. Ali-löytty, P. Jussila, T. Juuti, and L. P. Karjalainen, Influence of precipitation on initial high-temperature oxidation of Ti???Nb stabilized ferritic stainless steel SOFC interconnect alloy, International Journal of Hydrogen Energy, vol.37, issue.19, pp.14528-14535, 2012.
DOI : 10.1016/j.ijhydene.2012.07.097

K. Akiba, M. Ueda, K. Kawamura, and T. Maruyama, Quantitative Prediction of Voids Formation in a Growing Cobaltous Oxide Scale at 1373 K, MATERIALS TRANSACTIONS, vol.48, issue.11, pp.2997-3006, 2007.
DOI : 10.2320/matertrans.MER2007180

K. Akiba, M. Ueda, K. Kawamura, and T. Maruyama, Quantitative Prediction of Voids Formation in a Growing Nickel Oxide Scale at 1373 K, MATERIALS TRANSACTIONS, vol.48, issue.10, pp.2753-2761, 2007.
DOI : 10.2320/matertrans.MER2007122

T. Horita, H. Kishimoto, K. Yamaji, Y. Xiong, N. Sakai et al., Evaluation of Laves-phase forming Fe???Cr alloy for SOFC interconnects in reducing atmosphere, Journal of Power Sources, vol.176, issue.1, pp.54-61, 2008.
DOI : 10.1016/j.jpowsour.2007.10.041

J. Wu, C. D. Johnson, R. S. Gemmen, and X. Liu, The performance of solid oxide fuel cells with Mn???Co electroplated interconnect as cathode current collector, Journal of Power Sources, vol.189, issue.2, pp.1106-1113, 2009.
DOI : 10.1016/j.jpowsour.2008.12.079

H. Kurokawa, C. Jacobson, L. Dejonghe, and S. Visco, Chromium vaporization of bare and of coated iron???chromium alloys at 1073??K, Solid State Ionics, vol.178, issue.3-4, pp.3-4, 2007.
DOI : 10.1016/j.ssi.2006.12.010

X. Chen, P. Hou, C. Jacobson, S. Visco, and L. Dejonghe, Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties, Solid State Ionics, vol.176, issue.5-6, pp.5-6, 2005.
DOI : 10.1016/j.ssi.2004.10.004

K. Przybylski and T. Brylewski, Interface Reactions between Conductive Ceramic Layers and Fe-Cr Steel Substrates in SOFC Operating Conditions, MATERIALS TRANSACTIONS, vol.52, issue.3, pp.345-351, 2011.
DOI : 10.2320/matertrans.MB201013

V. Sauchuk, S. Megel, E. Girdauskaite, N. Trofimenko, M. Kusnezoff et al., Influence of protective layers on SOFC operation, Russian Journal of Electrochemistry, vol.47, issue.5, pp.522-530, 2011.
DOI : 10.1134/S1023193511050107

Y. Fang, C. Wu, X. Duan, S. Wang, and Y. Chen, High-temperature oxidation process analysis of MnCo2O4 coating on Fe???21Cr alloy, International Journal of Hydrogen Energy, vol.36, issue.9, pp.5611-5616, 2011.
DOI : 10.1016/j.ijhydene.2011.01.130

T. Uehara, N. Yasuda, M. Okamoto, and Y. Baba, Effect of Mn???Co spinel coating for Fe???Cr ferritic alloys ZMG232L and 232J3 for solid oxide fuel cell interconnects on oxidation behavior and Cr-evaporation, Journal of Power Sources, vol.196, issue.17, pp.7251-7256, 2011.
DOI : 10.1016/j.jpowsour.2010.11.078

J. W. Stevenson, Z. G. Yang, G. G. Xia, Z. Nie, and J. D. Templeton, Long-term oxidation behavior of spinel-coated ferritic stainless steel for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.231, pp.256-263, 2013.
DOI : 10.1016/j.jpowsour.2013.01.033

L. Chen, E. Y. Sun, J. Yamanis, and N. Magdefrau, Oxidation Kinetics of Mn[sub 1.5]Co[sub 1.5]O[sub 4]-Coated Haynes 230 and Crofer 22 APU for Solid Oxide Fuel Cell Interconnects, Journal of The Electrochemical Society, vol.157, issue.6, pp.931-942, 2010.
DOI : 10.1149/1.3391820

W. Wei, W. Chen, and D. G. Ivey, Oxidation resistance and electrical properties of anodically electrodeposited Mn???Co oxide coatings for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.186, issue.2, pp.428-434, 2009.
DOI : 10.1016/j.jpowsour.2008.09.114

M. R. Bateni, P. Wei, X. Deng, and A. Petric, Spinel coatings for UNS 430 stainless steel interconnects, Surface and Coatings Technology, vol.201, issue.8, pp.4677-4684, 2007.
DOI : 10.1016/j.surfcoat.2006.10.011

M. R. Ardigo, I. Popa, S. Chevalier, V. Parry, A. Galerie et al., Effect of coatings on a comercial stainless steel for SOFC interconnect application in anode atmosphere, ESC Trans, vol.57, issue.1, pp.4490-44952301, 2013.

A. Kruk, M. Stygar, and T. Brylewski, Mn???Co spinel protective???conductive coating on AL453 ferritic stainless steel for IT-SOFC interconnect applications, Journal of Solid State Electrochemistry, vol.38, issue.464, pp.993-1003, 2013.
DOI : 10.1007/s10008-012-1952-8

K. Wang, Y. Liu, and J. W. Fergus, Interactions Between SOFC Interconnect Coating Materials and Chromia, Journal of the American Ceramic Society, vol.397, issue.40, pp.4490-4495, 2011.
DOI : 10.1111/j.1551-2916.2011.04749.x

J. Johansson and . Svensson, Oxidation of Co-and Ce-nanocoated FeCr steels: A microstructural investigation, Surf. Coat. Technol, vol.215, pp.62-74, 2013.

C. Collins, J. Lucas, T. L. Buchanan, M. Kopczyk, P. E. Kayani et al., Chromium volatility of coated and uncoated steel interconnects for SOFCs, Surface and Coatings Technology, vol.201, issue.7, pp.4467-4470, 2006.
DOI : 10.1016/j.surfcoat.2006.08.053

J. Froitzheim, S. Canovic, M. Nikumaa, R. Sachitanand, L. G. Johansson et al., Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects, Journal of Power Sources, vol.220, pp.217-227, 2012.
DOI : 10.1016/j.jpowsour.2012.06.092

J. G. Grolig, J. Froitzheim, and J. Svensson, Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Oxidation performance and chromium evaporation, Journal of Power Sources, vol.248, pp.1007-1013, 2014.
DOI : 10.1016/j.jpowsour.2013.08.089

H. Kurokawa, C. Jacobson, L. Dejonghe, and S. Visco, Chromium vaporization of bare and of coated iron???chromium alloys at 1073??K, Solid State Ionics, vol.178, issue.3-4, pp.3-4, 2007.
DOI : 10.1016/j.ssi.2006.12.010

T. Uehara, N. Yasuda, M. Okamoto, and Y. Baba, Effect of Mn???Co spinel coating for Fe???Cr ferritic alloys ZMG232L and 232J3 for solid oxide fuel cell interconnects on oxidation behavior and Cr-evaporation, Journal of Power Sources, vol.196, issue.17, pp.7251-7256, 2011.
DOI : 10.1016/j.jpowsour.2010.11.078

A. C. Sabioni, A. Huntz, E. Conceição, M. Mantel, and C. Haut, Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steels, Materials Research, vol.6, issue.2, pp.179-185, 2003.
DOI : 10.1590/S1516-14392003000200012

N. J. Magdefrau, L. Chen, E. Y. Sun, and M. Aindow, Effects of alloy heat treatment on oxidation kinetics and scale morphology for Crofer 22 APU, Journal of Power Sources, vol.241, pp.756-767, 2013.
DOI : 10.1016/j.jpowsour.2013.03.181

P. Sarrazin, A. Galerie, and J. Fouletier, Mechanisms of high temperature corrosion: A kinetic approach, 2008.

C. A. Barrett and C. E. Lowell, Comparison of isothermal and cyclic oxidation behavior of twenty-five commercial sheet alloys at 1150???C, Oxidation of Metals, vol.3, issue.6, pp.307-355, 1975.
DOI : 10.1007/BF00613534

B. D. Hosterman, Raman spectroscopic study of solid solution spinel oxides, 2011.

J. Mougin, Tenue mécanique de couches d'oxyde thermiques générées sur le chrome et sur quelques aciers inoxydables ferritiques: Étude des contraintes et de d'adhérence, 2001.

D. Renusch, B. Veal, K. Natesan, and M. Grimsditch, Transient oxidation in Fe-Cr-Ni alloys: A Raman-scattering study, Oxidation of Metals, vol.129, issue.5-6, pp.5-6, 1996.
DOI : 10.1007/BF01048636

F. Rouillard, G. Moine, L. Martinelli, and J. C. Ruiz, Corrosion of 9Cr Steel in CO2 at Intermediate Temperature I: Mechanism of Void-Induced Duplex Oxide Formation, Oxidation of Metals, vol.90, issue.292, pp.27-55, 2012.
DOI : 10.1007/s11085-011-9271-5

N. A. Shariff, A. Jalar, M. I. Sahri, and N. K. Othman, Effect of high temperature corrosion on austenitic stainless steel grade 304 in CO2 gas at 700 o C, Sains Malaysiana, vol.43, issue.7, pp.1069-1075, 2014.

G. Berthomé, Surface analysis: An introduction to XPS

G. Bertomé, Réactivité physico-chimique des surfaces : Optimisation des propriétés d'usage

J. Birnie, C. Craggs, D. J. Gardiner, and P. R. Graves, Ex situ and in situ determination of stress distributions in chromium oxide films by raman microscopy, Corrosion Science, vol.33, issue.1, pp.1-12, 1992.
DOI : 10.1016/0010-938X(92)90014-T

P. Y. Hou, J. Ager, J. Mougin, and A. Galerie, Limitations and Advantages of Raman Spectroscopy for the Determination of Oxidation Stresses, Oxidation of Metals, vol.71, issue.3, pp.5-6, 2011.
DOI : 10.1007/s11085-011-9235-9

URL : https://hal.archives-ouvertes.fr/hal-00640174

R. L. Farrow, P. L. Mattern, S. N. Laboratories, and S. Diego, Characterization of surface oxides by raman spectroscopy, Appl. Phys. Lett, vol.73, pp.353-358, 1980.

J. Mougin, T. L. Bihan, and G. Lucazeau, High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy, Journal of Physics and Chemistry of Solids, vol.62, issue.3, pp.553-563, 2001.
DOI : 10.1016/S0022-3697(00)00215-8

J. C. Hamilton and R. J. Anderson, Oxidation of Fe-18Cr-3Mo : an in-situ Raman study, High Temp. Sci, vol.19, pp.307-321, 1985.

D. J. Gardiner, C. J. Littleton, K. M. Thomas, and K. N. Strafford, Distribution and characterization of high temperature air corrosion products on iron-chromium alloys by Raman microscopy, Oxidation of Metals, vol.19, issue.1-2, pp.57-72, 1987.
DOI : 10.1007/BF00656729

R. L. Farrow, R. E. Benner, A. S. Nagelberg, and P. L. Mattern, Characterization of surface oxides by Raman spectroscopy, Thin Solid Films, vol.73, issue.2, pp.353-358, 1980.
DOI : 10.1016/0040-6090(80)90499-X

K. Veena, V. K. Vaidyan, and P. Koshy, Characterization of ferrochromium thin films, Journal of Materials Science Letters, vol.57, issue.1, pp.80-82, 1989.
DOI : 10.1007/BF00720259

D. H. Speidel and A. Muan, The System Manganese Oxide-Cr2O3 in Air, Journal of the American Ceramic Society, vol.256, issue.3, pp.577-578, 1963.
DOI : 10.1063/1.1748643

X. Chen, P. Hou, C. Jacobson, S. Visco, and L. Dejonghe, Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties, Solid State Ionics, vol.176, issue.5-6, pp.5-6, 2005.
DOI : 10.1016/j.ssi.2004.10.004

M. Stanislowski, E. Wessel, K. Hilpert, T. Markus, and L. Singheiser, Chromium Vaporization from High-Temperature Alloys, Journal of The Electrochemical Society, vol.154, issue.4, p.295, 2007.
DOI : 10.1149/1.2434690

Y. Madi, E. Salhi, F. Charlot, A. Galerie, and Y. Wouters, Influence of polishinginduced surface hardening on the adhesion of oxide scales grown on a ferritic stainless steel, Oxid. Met, vol.75, pp.3-4, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00640175

B. X. Huang, K. Wang, J. S. Church, and Y. Li, Characterization of oxides on niobium by raman and infrared spectroscopy, Electrochimica Acta, vol.44, issue.15, pp.2571-2577, 1999.
DOI : 10.1016/S0013-4686(98)00385-5

J. Ding, P. G. Mccormick, and R. Street, Formation of spinel Mn-ferrite during mechanical alloying, Journal of Magnetism and Magnetic Materials, vol.171, issue.3, pp.309-314, 1997.
DOI : 10.1016/S0304-8853(97)00093-0

X. G. Zheng and D. J. Young, High-temperature corrosion of Cr2O3-forming alloys in CO-CO2-N2 atmospheres, Oxidation of Metals, vol.239, issue.3-4, pp.3-4, 1994.
DOI : 10.1007/BF01052021

D. J. Young, High temperature oxidation and corrosion of metals, 2008.

P. Kofstad, High temperature corrosion, 1988.

P. Sarrazin, A. Galerie, and J. Fouletier, Mechanisms of high temperature corrosion: A kinetic approch, 2008.

C. A. Barrett and C. E. Lowell, Comparison of isothermal and cyclic oxidation behavior of twenty-five commercial sheet alloys at 1150???C, Oxidation of Metals, vol.3, issue.6, pp.307-355, 1975.
DOI : 10.1007/BF00613534

G. Bertomé, Réactivité physico-chimique des surfaces : Optimisation des propriétés d'usage

J. Mougin, Tenue mécanique de couches d'oxyde thermiques générées sur le chrome et sur quelques aciers inoxydables ferritiques: Étude des contraintes et de d'adhérence, Institue National Polytechnique de Grenoble, 2001.

N. A. Shariff, A. Jalar, M. I. Sahri, and N. K. Othman, Effect of High Temperature Corrosion on Austenitic Stainless Steel Grade 304 in CO2 Gas at 700 o C, Sains Malaysiana, vol.43, issue.7, pp.1069-1075, 2014.

A. C. Sabioni, A. Huntz, E. Conceição-da-luz, M. Mantel, and C. Haut, Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steels, Materials Research, vol.6, issue.2, pp.179-185, 2003.
DOI : 10.1590/S1516-14392003000200012

J. Birnie, C. Craggs, D. J. Gardiner, and P. R. Graves, Ex situ and in situ determination of stress distributions in chromium oxide films by raman microscopy, Corrosion Science, vol.33, issue.1, pp.1-12, 1992.
DOI : 10.1016/0010-938X(92)90014-T

B. D. Hosterman, Raman spectroscopic study of solid solution spinel oxides, 2011.

P. Y. Hou, J. Ager, J. Mougin, and A. Galerie, Limitations and Advantages of Raman Spectroscopy for the Determination of Oxidation Stresses, Oxidation of Metals, vol.71, issue.3, pp.229-245, 2011.
DOI : 10.1007/s11085-011-9235-9

URL : https://hal.archives-ouvertes.fr/hal-00640174

R. L. Farrow, R. E. Benner, A. S. Nagelberg, and P. L. Mattern, Characterization of surface oxides by raman spectroscopy, Appl. Phys. Lett, vol.73, pp.353-358, 1980.

J. Mougin, T. L. Bihan, and G. Lucazeau, High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy, Journal of Physics and Chemistry of Solids, vol.62, issue.3, pp.553-563, 2001.
DOI : 10.1016/S0022-3697(00)00215-8

D. Renusch, B. Veal, K. Natesan, and M. Grimsditch, Transient oxidation in Fe-Cr-Ni alloys: A Raman-scattering study, Oxidation of Metals, vol.129, issue.5-6, pp.5-6, 1996.
DOI : 10.1007/BF01048636

C. T. Fujii and R. A. Meussner, Carburization of Fe-Cr Alloys During Oxidation in Dry Carbon Dioxide, Journal of The Electrochemical Society, vol.114, issue.5, pp.435-442, 1967.
DOI : 10.1149/1.2426622

C. S. Giggins and F. S. Pettit, Corrosion of metals and alloys in mixed gas environments at elevated temperatures, Oxidation of Metals, vol.1, issue.5, pp.363-413, 1980.
DOI : 10.1007/BF00603609

P. Promdirek, G. Lothongkum, S. Chandra-ambhorn, Y. Wouters, and A. Galerie, Oxidation Kinetics of AISI 441 Ferritic Stainless Steel at High Temperatures in CO2 Atmosphere, Oxidation of Metals, vol.101, issue.1, pp.3-4, 2014.
DOI : 10.1007/s11085-013-9432-9

URL : https://hal.archives-ouvertes.fr/hal-01053222

M. Stanislowski, E. Wessel, K. Hilpert, T. Markus, and L. Singheiser, Chromium Vaporization from High-Temperature Alloys, Journal of The Electrochemical Society, vol.154, issue.4, p.295, 2007.
DOI : 10.1149/1.2434690

D. J. Young, T. D. Nguyen, and J. Zhang, Corrosion of chromia formers by hot CO2 gas: A review, Conference Proceeding, International Symposium on High- Temperature Oxidation and Corrosion, 2014.

S. Henry, J. Mougin, Y. Wouters, J. Petit, and A. Galerie, Characterization of Chromia Scales Grown on Pure Chromium in Different Oxidizing Atmospheres, Materials at High Temperatures, vol.17, issue.2, pp.231-234, 2000.
DOI : 10.3184/096034000783640866

A. Galerie, J. Petit, Y. Wouters, J. Mougin, A. Srisrual et al., Water Vapour Effects on the Oxidation of Chromia-Forming Alloys, Materials Science Forum, vol.696, pp.200-205, 2011.
DOI : 10.4028/www.scientific.net/MSF.696.200

URL : https://hal.archives-ouvertes.fr/hal-00609364

A. Galerie, Y. Wouters, and M. Caillet, The kinetic behaviour of metals in water vapour: can general rules be proposed?, Mater. Sci. Forum, vol.11, pp.369-372, 2001.

J. M. Smith, Introduction to chemical engineering thermodynamics, Journal of Chemical Education, vol.27, issue.10, 2005.
DOI : 10.1021/ed027p584.3

J. Mougin, Tenue mécanique de couches d'oxyde thermiques générées sur le chrome et sur quelques aciers inoxydables ferritiques: Étude des contraintes et de d'adhérence, 2001.

B. D. Hosterman, Raman spectroscopic study of solid solution spinel oxides, 2011.

J. Mougin, T. L. Bihan, and G. Lucazeau, High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy, Journal of Physics and Chemistry of Solids, vol.62, issue.3, pp.553-563, 2001.
DOI : 10.1016/S0022-3697(00)00215-8

D. Renusch, B. Veal, K. Natesan, and M. Grimsditch, Transient oxidation in Fe-Cr-Ni alloys: A Raman-scattering study, Oxidation of Metals, vol.129, issue.5-6, pp.5-6, 1996.
DOI : 10.1007/BF01048636

J. Birnie, C. Craggs, D. J. Gardiner, and P. R. Graves, Ex situ and in situ determination of stress distributions in chromium oxide films by raman microscopy, Corrosion Science, vol.33, issue.1, pp.1-12, 1992.
DOI : 10.1016/0010-938X(92)90014-T

D. J. Gardiner, C. J. Littleton, K. M. Thomas, and K. N. Strafford, Distribution and characterization of high temperature air corrosion products on iron-chromium alloys by Raman microscopy, Oxidation of Metals, vol.19, issue.1-2, pp.57-72, 1987.
DOI : 10.1007/BF00656729

G. Calvarin, A. M. Huntz, A. Hugot-le-goff, S. Joiret, and M. C. Bernard, Oxide Scale Stress Determination by Raman Spectroscopy Application to the NiCr/Cr2O3 System and Influence of Yttrium, Scripta Materialia, vol.38, issue.11, pp.1649-1658, 1998.
DOI : 10.1016/S1359-6462(98)00079-7

K. F. Mccarty and D. R. Boehme, A Raman study of the systems Fe3???xCrxO4 and Fe2???xCrxO3, Journal of Solid State Chemistry, vol.79, issue.1, pp.19-27, 1989.
DOI : 10.1016/0022-4596(89)90245-4

J. Mougin, T. L. Bihan, and G. Lucazeau, High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy, Journal of Physics and Chemistry of Solids, vol.62, issue.3, pp.553-563, 2001.
DOI : 10.1016/S0022-3697(00)00215-8

D. L. De-faria, S. Silva, and M. T. De-oliveira, Raman microspectroscopy of some iron oxides and oxyhydroxides, Journal of Raman Spectroscopy, vol.28, issue.11, pp.873-878, 1997.
DOI : 10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B

S. C. Tjong, Laser raman spectroscopic studies of the surface oxides formed on iron chromium alloys at elevated temperatures, Materials Research Bulletin, vol.18, issue.2, pp.157-165, 1983.
DOI : 10.1016/0025-5408(83)90076-4

R. J. Thibeau, C. W. Brown, and R. H. Heidersbach, Raman Spectra of Possible Corrosion Products of Iron, Applied Spectroscopy, vol.32, issue.6, pp.532-535, 1978.
DOI : 10.1366/000370278774330739

O. N. Shebanova and P. Lazor, Raman spectroscopic study of magnetite (FeFe2O4): a new assignment for the vibrational spectrum, Journal of Solid State Chemistry, vol.174, issue.2, pp.424-430, 2003.
DOI : 10.1016/S0022-4596(03)00294-9

D. Varshney and A. Yogi, Structural, transport and spectroscopic properties of Ti4+ substituted magnetite: Fe3???xTixO4, Materials Chemistry and Physics, vol.133, issue.1, pp.103-109, 2012.
DOI : 10.1016/j.matchemphys.2011.12.068

A. Wang, K. E. Kuebler, B. L. Jolliff, and L. A. Haskin, Raman spectroscopy of Fe-Ti-Cr-oxides, case study: Martian meteorite EETA79001, American Mineralogist, vol.89, issue.5-6, pp.665-680, 2004.
DOI : 10.2138/am-2004-5-601

M. Chen, J. Shu, X. Xie, and H. Mao, Natural CaTi2O4-structured FeCr2O4 polymorph in the Suizhou meteorite and its significance in mantle mineralogy, Geochimica et Cosmochimica Acta, vol.67, issue.20, pp.3937-3942, 2003.
DOI : 10.1016/S0016-7037(03)00175-3

K. Veena, V. K. Vaidyan, and P. Koshy, Characterization of ferrochromium thin films, Journal of Materials Science Letters, vol.57, issue.1, pp.80-82, 1989.
DOI : 10.1007/BF00720259

D. Varshney and A. Yogi, Structural and transport properties of stoichiometric Mn2+-doped magnetite: Fe3???xMnxO4, Materials Chemistry and Physics, vol.128, issue.3, pp.489-494, 2011.
DOI : 10.1016/j.matchemphys.2011.03.040

J. C. Hamilton and R. J. Anderson, Oxidation of Fe-18Cr-3Mo : an in-situ Raman study, High Temp. Sci, vol.19, pp.307-321, 1985.

R. L. Farrow, R. E. Benner, A. S. Nagelberg, and P. L. Mattern, Characterization of surface oxides by Raman spectroscopy, Thin Solid Films, vol.73, issue.2, pp.353-358, 1980.
DOI : 10.1016/0040-6090(80)90499-X

R. L. Farrow and A. S. Nagelberg, Raman spectroscopy of surface oxides at elevated temperatures, Applied Physics Letters, vol.36, issue.12, pp.945-947, 1980.
DOI : 10.1063/1.91659

Y. Matsuda, S. Hinotani, and K. Yamanaka, Characterization of oxide layers on SUS410Ti stainless steel grown in low oxygen pressures by Raman spectroscopy, Tetsu to Hagane, vol.82, issue.3, pp.32-37, 1996.

C. B. Azzoni, M. C. Mozzati, P. Galinetto, V. Paleari, D. Massarotti et al., Thermal stability and structural transition of metastable Mn5O8: in situ micro-Raman study, Solid State Communications, vol.112, issue.7, pp.375-378, 1999.
DOI : 10.1016/S0038-1098(99)00368-3

R. López and R. Gómez, Photocatalytic Degradation of 4-Nitrophenol on Well Characterized Sol???Gel Molybdenum Doped Titania Semiconductors, Topics in Catalysis, vol.71, issue.8-9, pp.8-9, 2011.
DOI : 10.1007/s11244-011-9614-0

H. Y. Chuang and D. H. Chen, Catalyst-free low temperature synthesis of discrete anatase titanium dioxide nanocrystals with highly thermal stability and UVC-cut capability, Journal of Nanoparticle Research, vol.19, issue.S1, pp.233-241, 2008.
DOI : 10.1007/s11051-008-9397-9

F. Milella, J. M. Gallardo-amores, M. Baldi, and G. Busca, A study of Mn?Ti oxide powders and their behaviour in propane oxidation catalysis, J. Mater. Chem, vol.8, issue.11, pp.2525-2531, 1998.

Z. Lin, The Lin Research Group, School of Materials Science and Engineering, Georgia Institute of Technology, BaTiO3 Nanocrystals, 2011.

F. Hardcastle, Raman Spectroscopy of Titania (TiO2) Nanotubular Water-Splitting Catalysts, J. Ark. Acad. Sci, vol.65, pp.43-48, 2011.

K. Yuda and H. Tanabe, Silicon oxide film, method of forming the silicon oxide film, and apparatus for depositing the silicon oxide film, pp.327-328, 2002.

B. X. Huang, K. Wang, J. S. Church, and Y. Li, Characterization of oxides on niobium by raman and infrared spectroscopy, Electrochimica Acta, vol.44, issue.15, pp.2571-2577, 1999.
DOI : 10.1016/S0013-4686(98)00385-5

C. Cao, D. Ford, S. Bishnoi, T. Proslier, B. Albee et al., Detection of surface carbon and hydrocarbons in hot spot regions of niobium superconducting rf cavities by Raman spectroscopy, Physical Review Special Topics - Accelerators and Beams, vol.16, issue.6, pp.1-9, 2013.
DOI : 10.1103/PhysRevSTAB.16.064701

. Au-terme-de-ce-travail-de-thèse, il peut être conclu que la pré-oxydation de l'alliage 441 à basse température (250 °C) dans l'argon ou le mélange CO/CO2 ou encore à plus haute température (850 °C) dans le mélange CO/CO2 sont des traitements qui conduisent à l'abaissement de la vitesse de sublimation du chrome et par voie de conséquence à l

L. Antoni, J. Mougin, A. Galerie, and M. Dupeux, Influence of Ti and Nb on the competition between oxidation kinetics and oxide adhesion on 18 % Cr stainless steels, C032- P142byLAntoni.pdf. [Accessed, 2001.

J. Froitzheim, S. Canovic, M. Nikumaa, R. Sachitanand, L. G. Johansson et al., Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects, Journal of Power Sources, vol.220, pp.217-227, 2012.
DOI : 10.1016/j.jpowsour.2012.06.092

J. G. Grolig, J. Froitzheim, and J. Svensson, Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Oxidation performance and chromium evaporation, Journal of Power Sources, vol.248, pp.1007-1013, 2014.
DOI : 10.1016/j.jpowsour.2013.08.089

J. Rufner, P. Gannon, P. White, M. Deibert, S. Teintze et al., Oxidation behavior of stainless steel 430 and 441 at 800??C in single (air/air) and dual atmosphere (air/hydrogen) exposures, International Journal of Hydrogen Energy, vol.33, issue.4, pp.1392-1398, 2008.
DOI : 10.1016/j.ijhydene.2007.12.067

Z. Yang, G. Xia, C. Wang, Z. Nie, J. Templeton et al., Investigation of iron???chromium???niobium???titanium ferritic stainless steel for solid oxide fuel cell interconnect applications, Journal of Power Sources, vol.183, issue.2, pp.660-667, 2008.
DOI : 10.1016/j.jpowsour.2008.05.037

M. Stanislowski, E. Wessel, K. Hilpert, T. Markus, and L. Singheiser, Chromium Vaporization from High-Temperature Alloys, Journal of The Electrochemical Society, vol.154, issue.4, p.295, 2007.
DOI : 10.1149/1.2434690

H. Kurokawa, C. Jacobson, L. Dejonghe, and S. Visco, Chromium vaporization of bare and of coated iron???chromium alloys at 1073??K, Solid State Ionics, vol.178, issue.3-4, pp.3-4, 2007.
DOI : 10.1016/j.ssi.2006.12.010

A. Galerie, M. R. Ardigo, P. Berthod, W. Chandra-ambhorn, S. Chevalier et al., Influence of water vapor on high-temperature oxidation of chromiaforming materials, French Activity on High Temperature Corrosion in Water Vapor. Materials Science Foundations, vol.76

C. Collins, J. Lucas, T. L. Buchanan, M. Kopczyk, P. E. Kayani et al., Chromium volatility of coated and uncoated steel interconnects for SOFCs, Surface and Coatings Technology, vol.201, issue.7, pp.4467-4470, 2006.
DOI : 10.1016/j.surfcoat.2006.08.053

G. R. Holcomb, Calculation of Reactive-evaporation Rates of Chromia, Oxidation of Metals, vol.523, issue.464, pp.3-4, 2008.
DOI : 10.1007/s11085-008-9091-4