Fracture energy of epoxy resin under plane strain conditions, J. Mater. Sci, vol.13, pp.1680-1688, 1978. ,
Discontinuous Equilibrium Solutions and Cavitation in Nonlinear Elasticity, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.306, issue.1496, pp.557-611, 1982. ,
DOI : 10.1098/rsta.1982.0095
Contribution à l'étude du mécanisme d'endommagement de polymères thermoplastiques semi cristallins par décompression explosive de gaz : interactions gaz/ polymères à températures et pressions élevées, 2003. ,
The plasticization of a polyurethane by carbon dioxide at high pneumatic stresses, Polymer, vol.36, issue.16, pp.3099-3102, 1995. ,
DOI : 10.1016/0032-3861(95)97871-C
Internal Crack Symmetry Phenomena during Gas-Induced Rupture of Elastomers, Rubber Chemistry and Technology, vol.65, issue.2, pp.350-373, 1992. ,
DOI : 10.5254/1.3538617
???Explosive Decompression Failure??? of Rubbers: A Review of the Origins of Pneumatic Stress Induced Rupture in Elastomers, Rubber Chemistry and Technology, vol.67, issue.3, pp.384-416, 1994. ,
DOI : 10.5254/1.3538683
Modes of deformation in rubber-modified thermoplastics during tensile impact, J. Mater. Sci, vol.26, pp.6249-6259, 1991. ,
On the relevance of continuum damage mechanics as applied to the Mullins effect in elastomers, J. Mech. Phys. Solids, vol.52, pp.1627-1650, 2004. ,
URL : https://hal.archives-ouvertes.fr/hal-01007152
Cavitation in model elastomeric composites, J. Mater. Sci, vol.23, pp.141-144, 1988. ,
Internal fracture in an elastomer containing a rigid inclusion, J. Mater. Sci, vol.22, pp.2899-2905, 1987. ,
The nucleation of microcellular thermoplastic foam with additives: Part I: Theoretical considerations, Polym. Eng. Sci, vol.27, pp.485-492, 1987. ,
Nucleation of microcellular foam: theory and practice, Polym. Eng. Sci, vol.27, pp.500-503, 1987. ,
The nucleation of microcellular thermoplastic foam with additives: Part II: Experimental results and discussion, Polym. Eng. Sci, vol.27, pp.493-499, 1987. ,
An experimental investigation of fracture by cavitation of model elastomeric networks, J. Polym, 2010. ,
The mechanical properties of elastomers in high-pressure CO2, J. Mater. Sci, vol.34, pp.417-422, 1999. ,
Bubble formation in vulcanized rubbers, J. Polym. Sci. Part -2 Polym. Phys, vol.6, pp.1853-1861, 1968. ,
A review on the Mullins effect, Eur. Polym. J, vol.45, pp.601-612, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00773015
Nylon-6 Rubber Blends. 4. Cavitation and Yield in Nylon Rubber Blends, J. Mater. Sci, vol.29, pp.3489-3496, 1994. ,
Surface energy effects for cavity growth and nucleation in an incompressible neo-Hookean material?modeling and experiment, Int. J. Solids Struct, vol.41, pp.6111-6127, 2004. ,
Polymers toughened with rubber microspheres: an analytical solution for stresses and strains in the rubber particles at equilibrium and rupture, Int. J. Fract, vol.77, pp.141-159, 1996. ,
Distributions de contrainte hydrostatique dans des particules d'élastomère: effets des interactions mécanique en élasticité, Eur. J. Mech.-ASolids, 2000. ,
Internal rupture of bonded rubber cylinders in tension, Proc. R. Soc. Lond. Ser. Math. Phys. Sci, pp.195-205, 1959. ,
Nucleation and growth of gas bubbles in elastomers, J, 1969. ,
Effect of network heterogeneity on tensile and tear strengths of radiation, peroxide, efficient and conventional cured polyisoprene, J. Polym. Sci. Part B Polym. Phys, vol.32, pp.287-295, 1994. ,
Cavitation in elastic and elastic-plastic solids, J. Mech. Phys. Solids, vol.40, pp.571-592, 1992. ,
Experimental and finite element investigation of void nucleation in rubber-like materials, Int. J. Solids Struct, vol.48, pp.1248-1254, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00572513
Effect of temperature and pressure on permeation, ageing and emissions of elastomers, Seal. Technol, pp.5-10, 2002. ,
On key parameters influencing cavitation damage upon fast decompression in a hydrogen saturated elastomer, Polym. Test, vol.30, pp.811-818, 2011. ,
Bubble nucleation from gas cavities?a review, 1999. ,
Acoustic emission in bonded elastomer discs subjected to compression. I, J. Appl. Polym. Sci, vol.45, pp.865-869, 1992. ,
Acoustic emission in bonded elastomer discs subjected to uniform tension. II, J. Appl. Polym. Sci, vol.42, 1991. ,
Determination of the size of the representative volume element for random composites: statistical and numerical approach, Int. J. Solids Struct, vol.40, pp.3647-3679, 2003. ,
Visualizing O-ring behavior with high-pressure gas decompression, International Hydrogen Energy Development Forum, 2012. ,
Dynamics of entangled linear polymer melts: A moleculardynamics simulation, J. Chem. Phys, vol.92, pp.5057-5086, 1990. ,
A constitutive model for cavitation and cavity growth in rubber-like materials under arbitrary tri-axial loading, Int. J. Solids Struct, vol.44, pp.6080-6100, 2007. ,
A constitutive model dealing with damage due to cavity growth and the Mullins effect in rubber-like materials under triaxial loading, J. Mech. Phys. Solids, vol.56, pp.953-973, 2008. ,
Gas induced damage in poly (vinylidene fluoride) exposed to decompression, Polymer, vol.40, pp.2981-2991, 1999. ,
Development of a test and failure analysis methodology for elastomeric seals exposed to rapid gas decompression in oilfield applications, Eng. Struct. Integr. Res. Dev. Appl. Vols, vol.1, issue.2, pp.754-757, 2007. ,
Fatigue damage in carbon black filled natural rubber investigated by X-ray microtomography and scanning electron microscopy, Const. Models Rubber VIII, p.393, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00930145
Effect of branched PP content on the physical properties and cell growth during foaming of TPOs, J, 2008. ,
Studies of the Growth and Collapse of¥ oids in Viscous Solids, Transactions, vol.1, issue.1, 1994. ,
Diffusion of gases in polyethylene terephthalate, J. Appl. Phys, vol.34, pp.13-20, 1963. ,
Molecular modeling of cavitation in polymer melts and rubbers, 15th International Conference on Deformation, Yield and Fracture of Polymers, 2012. ,
Two-ellipsoidal inhomogeneities by the equivalent inclusion method, J. Appl. Mech, vol.42, pp.847-852, 1975. ,
The mecanism of hydrogen brittleness and the approach of strength designfor hydrogen devices, 2012. ,
Machine compliance and hardening effects on cavity growth in soft adhesives, Int. J. Adhes. Adhes, vol.26, pp.117-124, 2006. ,
Nonmonotonic cavity growth in finite, compressible elasticity, Int. J. Solids Struct, vol.34, pp.3859-3872, 1997. ,
Catching the time evolution of microstructure morphology from dynamic covariograms, Comptes Rendus Mécanique, vol.343, pp.301-306, 2015. ,
Pressure dependence of gas permeability in a rubbery polymer, J. Appl. Polym. Sci, vol.61, pp.945-950, 1996. ,
A finite element approach to study cavitation instabilities in non-linear elastic solids under general loading conditions, Int. J. Non-Linear Mech, vol.47, pp.331-340, 2012. ,
Tensile dilatometric studies of deformation in polymeric materials and their composites, J. Mater. Sci, vol.28, pp.1421-1429, 1993. ,
Permeation properties, Compr. Polym. Sci, vol.2, pp.643-668, 1989. ,
Tear phenomena around solid inclusions in castable elastomers, Trans. Soc. Rheol, vol.9, pp.1957-1977, 1965. ,
Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers, Polym. Eng. Sci, vol.35, pp.432-440, 1995. ,
A study of cell nucleation in the extrusion of polypropylene foams, Polym. Eng. Sci, vol.37, pp.1-10, 1997. ,
Filamentary extrusion of microcellular polymers using a rapid decompressive element, Polym. Eng. Sci, vol.36, pp.34-48, 1996. ,
Developing elastomer seals for downhole safety valves [materials must withstand explosive decompression and methyl alcohol swell], Offshore Inc. Oilman, vol.52, pp.39-40, 1992. ,
Fracture of Elastomers by Gas Decompression, Rubber Chemistry and Technology, vol.68, issue.2, pp.197-211, 1995. ,
DOI : 10.5254/1.3538735
Studies of elastic waves in ethylene propylene rubber using acoustic emission sensor, pp.641-646, 2008. ,
Diffusion in Elastomers, Rubber Chemistry and Technology, vol.37, issue.5, pp.1065-1152, 1964. ,
DOI : 10.5254/1.3540396
Influence of structure of elastomers on their permeability to gases, Journal of Polymer Science, vol.5, issue.3, pp.307-332, 1950. ,
DOI : 10.1002/pol.1950.120050304
Exact solution for cavitated bifurcation for compressible hyperelastic materials, Int. J. Eng. Sci, vol.39, pp.1101-1117, 2001. ,
Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression, Polym. Test, vol.30, pp.76-85, 2011. ,
Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas, Int. J. Hydrog. Energy, vol.34, pp.1977-1989, 2009. ,
Why rubber explodes, Chemtech, vol.20, pp.492-495, 1990. ,