B. Campagne and H. Voillaume, Development of Laser Ultrasonics: Application to Complex Shape Aeronatical Parts, presented at the 1st International Symposium on Laser Ultrasonics : Science, Technology and application, 2008.

G. Georgeson, T. Edwards, J. Engel, S. Reisinger, and A. Ennen, Boeing Research and Technology, X-Ray Backscatter Imaging for Aerospace Applications, Voland, Quality control for X-Ray Systems ? A tool chain for NDT applications, presented at the 4th International Symposium on NDT in Aerospace 2012, 2010.

Y. Y. Hung, Y. S. Chen, S. P. Ng, L. Liu, Y. H. Huang et al., Review and comparison of shearography and active thermography for nondestructive evaluation, Materials Science and Engineering: R: Reports, vol.64, issue.5-6, pp.73-112, 2009.
DOI : 10.1016/j.mser.2008.11.001

X. Han, L. D. Favro, and R. L. Thomas, Sonic IR Imaging of delaminations and disbonds in composites, Journal of Physics D: Applied Physics, vol.44, issue.3, pp.34013-34018, 2011.
DOI : 10.1088/0022-3727/44/3/034013

J. Tashan and R. , Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography, Composite Structures, vol.94, issue.2, pp.519-531, 2012.
DOI : 10.1016/j.compstruct.2011.08.017

Z. Su, L. Ye, and Y. Lu, Guided Lamb waves for identification of damage in composite structures: A review, Journal of Sound and Vibration, vol.295, issue.3-5, pp.753-780, 2006.
DOI : 10.1016/j.jsv.2006.01.020

W. J. Staszewski, B. C. Lee, and R. Traynor, Fatigue crack detection in metallic structures with Lamb waves and 3D laser vibrometry, Measurement Science and Technology, vol.18, issue.3, pp.727-739, 2007.
DOI : 10.1088/0957-0233/18/3/024

A. Ak, M. Radzienski, M. Krawczuk, and W. Ostachowicz, Damage detection strategies based on propagation of guided elastic waves, published in Smart Mater, Struct, vol.21213, issue.18pp, pp.350240964-1726035024, 2012.

P. Malinowski, T. Wandowski, and W. Ostachowicz, Guided Waves for Aircraft Panel Monitoring, Key Engineering Materials, vol.558, pp.107-115, 2013.
DOI : 10.4028/www.scientific.net/KEM.558.107

R. D. Adams and B. W. Drinkwater, Nondestructive testing of adhesively-bonded joints, NDT & E International, pp.93-98, 1997.
DOI : 10.1016/S0963-8695(96)00050-3

R. L. Vijaya-kumar, M. R. Bhat, and C. R. Murthy, Some studies on evaluation of degradation in composite adhesive joints using ultrasonic techniques, Ultrasonics, vol.53, issue.6, pp.1150-1162, 2013.
DOI : 10.1016/j.ultras.2013.01.014

J. Cheng and F. Taheri, A novel smart adhesively bonded joint system, published in Smart Mater, Struct, vol.1414035, issue.5, pp.971-981, 2005.

S. Park, J. Kim, C. Lee, and S. Park, Impedance-based wireless debonding condition monitoring of CFRP laminated concrete structures, NDT & E International, vol.44, issue.2, pp.232-238, 2011.
DOI : 10.1016/j.ndteint.2010.10.006

A. R. Sanderson, S. L. Ogin, T. F. Capell, A. D. Crocombe, M. R. Gower et al., Monitoring the disbanding of CFRP plate-bonded reinforcement of a structural beam using a chirped FBG, J Mater Sci, vol.43, pp.6682-6694, 2008.

B. Ehrhart, B. Valeske, C. Muller, and C. Bockenheimer, Methods for the Quality Assessment of Adhesive Bonded CFRP Structures -A Resumé, presented at the 2nd International Symposium on NDT in Aerospace 2010, pp.22-24, 2010.

G. Wachinger, T. Meer, S. Beer, G. Müller, A. Helwig et al., Detection of contaminants ? a key aspect for composite adhesive repair bonding, at the 15th European Conference on Composite Materials (ECCM15), 2012.

A. Baker, D. Bitton, and J. Wang, Development of a proof test for through-life monitoring of bond integrity in adhesively bonded repairs to aircraft structure, International Journal of Adhesion and Adhesives, vol.36, pp.65-76, 2012.
DOI : 10.1016/j.ijadhadh.2012.03.004

R. L. Vijayakumar, M. R. Bhat, and C. R. Murthy, Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studies, International Journal of Adhesion and Adhesives, vol.42, pp.60-68, 2013.
DOI : 10.1016/j.ijadhadh.2013.01.004

J. Cuq-lelandais, Etude du comportement dynamique de matériaux sous choc laser sub-picoseconde, Thèse de l'ENSMA (Ecole Nationale, 2010.

B. A. Gama, S. L. Lopatnikov, and J. W. Gillespie, Hopkinson bar experimental technique: A critical review, Applied Mechanics Reviews, vol.57, issue.4, 2004.
DOI : 10.1115/1.1704626

P. S. Bulson, Explosive loading of engineering structures, Edited by E&FN Spon ? London, 1997.

R. Kinslow, High Velocity Impact Phenomena, 1971.

L. R. Veeser and J. C. Solem, Studies of Laser-Driven Shock Waves in Aluminum, Physical Review Letters, vol.40, issue.21, p.1391, 1978.
DOI : 10.1103/PhysRevLett.40.1391

J. A. Fox, Effect of water and paint coatings on laser???irradiated targets, Applied Physics Letters, vol.24, issue.10, pp.461-464, 1974.
DOI : 10.1063/1.1655012

C. R. Phipps, single???pulse lasers, Journal of Applied Physics, vol.64, issue.3, pp.1083-1096, 1988.
DOI : 10.1063/1.341867

R. Fabbro, J. Fournier, P. Ballard, D. Devaux, and J. Virmont, Physical study of laser???produced plasma in confined geometry, Journal of Applied Physics, vol.68, issue.2, pp.775-784, 1990.
DOI : 10.1063/1.346783

L. Berthe, R. Fabbro, P. Peyre, L. Tollier, and E. Bartnicki, Shock waves from a water-confined laser-generated plasma, Journal of Applied Physics, vol.82, issue.6, pp.2826-2832, 1997.
DOI : 10.1063/1.366113

L. Berthe, Processus de claquage de milieux transparents sous irradiation laser Application au choc laser en régime de confinement par eau, 1998.

A. Sollier, Étude des plasmas générés par interaction laser-matière en régime confiné Application au traitement des matériaux par choc laser, Thèse de l'Université de Versailles Saint-Quentin-en -Yvelines, 2002.

L. Tollier, R. Fabbro, and E. Bartnicki, Study of the laser-driven spallation process by the VISAR interferometry technique. II. Experiment and simulation of the spallation process, Journal of Applied Physics, vol.83, issue.3, 1998.
DOI : 10.1063/1.366820

J. L. Vossen, Measurement of Film-Substrate Bond Strength by Laser Spallation, Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM STP 640, pp.122-133, 1978.

J. Yuan and V. Gupta, Measurement of interface strength by the modified laser spallation technique. I. Experiment and simulation of the spallation process, Journal of Applied Physics, vol.74, issue.4, pp.2388-2410, 1993.
DOI : 10.1063/1.354698

V. Gupta, System and method for measuring the interface tensile strength of planar interfaces, US PATENT, vol.438, issue.5, p.402, 1995.

C. Bolis, Etude numérique et expérimentale de la séparation par chocs brefs d'interface de revêtement multi-couches. Application au test d'adhérence par chocs laser, Thèse de l'Université de Poitiers, Ecole Doctorale Sciences pour l'Ingénieur, 2004.

M. Arrigoni, Etude de l'influence des rugosités d'interface, de porosités, et de l'épaisseur d'échantillon sur la propagation des chocs dans des systèmes revêtus, Thèse de l'Université de Poitiers, Ecole Doctorale Sciences pour l'Ingénieur, 2004.

S. Barradas, R. Molins, M. Jeandin, M. Arrigoni, M. Boustie et al., Application of laser shock adhesion testing to the study of the interlamellar strength and coating?substrate adhesion in coldsprayed copper coating of aluminum, pp.18-27, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00153290

C. Bolis, L. Berthe, M. Boustie, M. Arrigoni, S. Barradas et al., Physical approach to adhesion testing using laser-driven shock waves, Journal of Physics D: Applied Physics, vol.40, issue.10, pp.3155-3163, 2007.
DOI : 10.1088/0022-3727/40/10/019

M. Arrigoni, S. Barradas, M. Braccini, M. Dupeux, M. Jeandin et al., A comparative study of three adhesion tests (EN 582, similar to ASTM C633, LASAT (LASer Adhesion Test), and bulge and blister test) performed on plasma sprayed copper deposited on aluminium 2017 substrates, Journal of Adhesion Science and Technology, vol.83, issue.5, pp.471-487, 2006.
DOI : 10.1163/156856106777144336
URL : https://hal.archives-ouvertes.fr/hal-00140880

. Nivard, State-of-the-art laser adhesion test (LASAT), published in Nondestructive Testing and Evaluation, DOI:10, 1080.

G. Rolland, P. Sallamand, V. Guipont, M. Jeandin, E. Boller et al., Laser-induced damage in coldsprayed composite coatings, Surface & Coatings Technology 205, pp.4915-4927, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00619392

M. Boustie, L. Berthe, M. De-resseguier, and . Arrigoni, Laser Shock Waves: fundamentals and Applications, presented at the 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00347927

D. Laporte, F. Malaise, P. L. Hereil, E. Buzaud, and J. M. Chevalier, Response of bonded assembly under shock wave loading, proceedings of the DYMAT, 2009.

D. Laporte, Analyse de la réponse d'assemblages collés sous des solicitations en dynamique rapide. Essais et modélisations, Thèse de l'ENSMA (Ecole Nationale, 2011.

D. Laporte, F. Malaise, M. Boustie, J. Chevalier, and E. Buzaud, Tensile strength of aluminum-epoxy resin composite structure under high strain rate conditions, at the APS ? SCCM Conference (Proceedings)
DOI : 10.1063/1.3686463

. Bossi, Bond strength measurement system using shock loads, United States Patent Application publication, Pub No.: US, pp.79552-79553, 2003.

. Toller, Apparatus and method for non-destructive testing, United States Patent 8, 2012.

R. H. Bossi, K. Housen, and W. Shepherd, Using shock loads to measure bonded joint strength, Material evaluation, vol.60, pp.1333-1338, 2002.

R. Bossi, K. Housen, and C. Walters, Laser Bond Inspection Device for Composites -has the Holy Grail been found? NTIAC (Nondestructive Testing Information Analysis Center) Newsletter, 2005.

R. Bossi, NDE developments for composite structures, Review of quantitative non-destructive evaluation, 2006.

R. Bossi, Assessing the Quality Of Bonded Joints, Boeing Phantom Works, 2006.

R. Bossi, Senior Technical Fellow Validating the strength of Adhesively bonded Joints, presented at the 2011 Aircraft Airworthiness & Sustainment Conference, Boeing Research & Technology, 2011.

R. Bossi, Senior Technical Fellow Boeing Research & Technology, NDE Challenges for Composite Aircraft, A4A Conference, NDT Forum, 2012.

M. Perton, Z. Gu, J. Monchalin, L. Gay, M. Berthe et al., Laser shock waves for adhesive bon testing, Proceedings of International SAMPE conference, 2010.

M. Perton, A. Blouin, and J. Monchalin, Adhesive bond testing of carbon???epoxy composites by laser shockwave, Journal of Physics D: Applied Physics, vol.44, issue.3, p.34012, 2010.
DOI : 10.1088/0022-3727/44/3/034012

M. Perton, A. Blouin, and J. Monchalin, Adhesive bond strength evaluation in composite materials by lasergenerated high amplitude ultrasound, presented at the 2 nd International Symposiumon Laser, Ultrasonics

. Arrigoni, Laser Induced Shock Waves for Composites Adhesive Bond Testing, published in REVIEW OF PROGRESS, QUANTITATIVE NONDESTRUCTIVE EVALUATION AIP Conference Proceedings, vol.29, issue.1211, pp.295-302, 2010.

M. Arrigoni, S. E. Kruger, A. Blouin, D. Lévesque, B. Arsenault et al., Adhesive Bond Testing By Laser Induced Shock Waves, 17th World Conference on Nondestructive Testing, pp.25-28, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00418628

M. Kruger, A. Perton, R. Johnston, E. Cole, and . Buzaud, LAser Shock Adhesion Test (LASAT) of composite materials for aerospace industry, 23rd Int. Conf. on Surface Modification Technologies (SMT23), 2 -5 Nov, 2009.

E. Gay, Comportement de composites sous choc induit par laser: Développement de l'essai d'adhérence par choc des assemblages de composites collés, Thèse de l'Ecole Nationale Supérieure d'Arts et Métiers, 2011.

E. Gay, L. Berthe, M. Boustie, M. Arrigoni, P. Mercier et al., Experimental study of composite damage under laser shock, presented at the 17 ème, Journée Nationale des CompositesJNC, vol.17, 2011.

S. K. Mazumdar, Composites manufacturing ? materials, product, and process engineering, 2002.

S. T. Peters, Handbook of composites, 1998.
DOI : 10.1007/978-1-4615-6389-1

D. Gay, Matériaux Composites, 5ème édition, 2005.

D. Roylance, M. Cambridge, and M. , http://ocw.mit.edu/courses/materials-science-and-engineering/3-11-mechanics-of-materials-fall- 1999/modules/laminates.pdf, Prepreg-DataSheets/M21_global.pdf Chapter1: Context and Bibliography, 2000.

K. T. Ramesh, Hight Strain Rates and Impact Experiments, pusblished in Springer Handbook of Experimental Solid Mechanics, pp.929-960, 2008.

W. J. Cantwell and J. Morton, The impact resistance of composite materials ??? a review, Composites, vol.22, issue.5, pp.347-362, 1991.
DOI : 10.1016/0010-4361(91)90549-V

S. Petit, C. Bouvet, A. Bergerot, and J. Barrau, Impact and compression after impact experimental study of a composite laminate with a cork thermal shield, Composites Science and Technology, vol.67, issue.15-16, pp.3286-3299, 2007.
DOI : 10.1016/j.compscitech.2007.03.032
URL : https://hal.archives-ouvertes.fr/hal-00509042

C. S. Lopes, O. Seresta, Y. Coquet, Z. Gürdal, P. P. Camanho et al., Thuis, Low-velocity impact damage on dispersed stacking sequence laminates. Part I: Experiments, published in Composites Science and Technology, pp.69-926, 2009.

N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, The effect of stacking sequence on the low-velocity impact response of composite laminate, presented at the 15th European Conference on Composite Materials (ECCM15), 2012.

C. S. Lopes, P. P. Camanho, Z. Gürdal, P. Maimí, and E. V. González, Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations, Composites Science and Technology, vol.69, issue.7-8, pp.937-947, 2009.
DOI : 10.1016/j.compscitech.2009.02.015

F. Lachaud, . Ch, L. Espinosa, and . Michel, Impact damage of carbone-epoxy laminates, p.17

A. Faggiani and B. G. Falzon, Predicting low-velocity impact damage on a stiffened composite panel, Composites Part A: Applied Science and Manufacturing, vol.41, issue.6, pp.737-749, 2010.
DOI : 10.1016/j.compositesa.2010.02.005

C. K. Davies, S. Turner, and K. H. Williamson, Flexed plate impact testing of carbon fibre-reinforced polymer composites, Composites, vol.16, issue.4, 1985.
DOI : 10.1016/0010-4361(85)90280-0

B. Vieille, V. M. Casado, and C. Bouvet, Comparative study of the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic ? and thermosetting composites, 15th European Conference on Composite Materials (ECCM15), pp.243-253, 2009.

Y. Zhang, M. Genest, D. Backman, A. Jonhston, A. Komus et al., Impact and Compression after Impact Tests of a Carbon, Epoxy Composite, presented at the 26 th Annual Technical Conference of ASC, 2011.

M. Sayer, N. B. Bektas, and O. Sayman, An experimental investigation on the impact behavior of hybrid composite plates, Composite Structures, vol.92, issue.5, pp.1256-1262, 2010.
DOI : 10.1016/j.compstruct.2009.10.036

M. Yasaee, I. P. Bond, and R. S. Trask, Novel compartmentalisation of low velocity Impact damage, presented at the 26 th Annual Technical Conference of ASC, 2011.

D. P. Dandekar, C. A. Hall, L. C. Chhabildas, and W. D. Reinhart, Shock response of a glass-fiber-reinforced polymer composite, Composite Structures, vol.61, issue.1-2, pp.61-51, 2003.
DOI : 10.1016/S0263-8223(03)00031-X

N. K. Naik, P. Shrirao, and B. C. Reddy, Ballistic impact behaviour of woven fabric composites: Parametric studies, Materials Science and Engineering: A, vol.412, issue.1-2, pp.104-116, 2005.
DOI : 10.1016/j.msea.2005.08.019

F. Yuan, L. Tsai, V. Prakash, A. M. Rajendran, and D. P. Dandekar, Spall strength of glass fiber reinforced polymer composites, International Journal of Solids and Structures, vol.44, issue.24, pp.7731-7747, 2007.
DOI : 10.1016/j.ijsolstr.2007.05.007

C. T. Key and S. C. Schumacher, Anisotropic shock response of unidirectional composite materials, presented at the 15th European Conference on Composite Materials (ECCM15), 2012.

C. S. Alexander, Dynamic response of a carbon fiber-epoxy composite subjected to planar impact, presented at the 15th European Conference on Composite Materials (ECCM15), 2012.

V. Wippo, P. Jaeschke, U. Stute, D. Kracht, and H. Haferkamp, The influence of carbon fibres in the temperature distribution during the laser transmission welding process, 15th European Conference on Composite Materials (ECCM15), 2012.

Y. Harada, T. Ito, T. Suzuki, M. Nishino, H. Niino et al., Environmental effects on mechanical behavior of CFRP using laser cutting process, 15th European Conference on Composite Materials (ECCM15), 2012.

J. K. Chen, A. Perea, and F. A. Allahdadi, Laser effects on the dynamic response of laminated composites, Composites Engineering, vol.5, issue.9, pp.1135-147, 1995.
DOI : 10.1016/0961-9526(95)00049-S

J. K. Chen, A. Perea, and F. A. Allahdadi, A study of laser/composite material interactions, Composites Science and Technology, vol.54, issue.1, pp.35-44, 1995.
DOI : 10.1016/0266-3538(95)00034-8

J. R. Triplett and G. A. Gurtman, A study of composite material damage induced by laser-supported detonation waves, published in Systems, science and softwre, 1976.

V. Gupta and A. S. Argon, Measurement of the anisotropic strength and toughness of Pitch-55 carbon ribbons, Journal of Materials Science, vol.34, issue.3, pp.777-785, 1992.
DOI : 10.1007/BF02403896

Z. Li, W. Zhu, J. Cheng, and G. Zhou, Measurements of laser-induced shock waves in carbon epoxy composites, Journal of materials science letters, pp.2122-2123, 1996.
DOI : 10.1007/BF00241145

C. Cazeneuve and J. Maille, Etude du comportement de composites à fibre de carbone sous différentes vitesses de sollicitations, Journal de Physique, Colloque C5, 1985.

J. Fitoussi, F. Meraghni, Z. Jendli, G. Hug, and D. Baptiste, Experimental methodology for high strain-rates tensile behaviour analysis of polymer matrix composites, Composites Science and Technology, vol.65, issue.14, pp.2174-2188, 2005.
DOI : 10.1016/j.compscitech.2005.05.001
URL : https://hal.archives-ouvertes.fr/hal-00303773

T. Gomez-del-rio, E. Barbero, R. Zaera, and C. Navarro, Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar, Composites Science and Technology, vol.65, issue.1, pp.61-71, 2005.
DOI : 10.1016/j.compscitech.2004.06.004

C. Elias-abi-abdallah, S. Bouvet, B. Rivallant, J. Broll, and . Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.1238-1245, 2009.
DOI : 10.1016/j.compscitech.2009.02.029

H. Koerber, J. Xavier, and P. P. Camanho, High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation, Mechanics of Materials, pp.1004-1019, 2010.
DOI : 10.1016/j.mechmat.2010.09.003

P. Robinson, C. A. Mccarroll, S. T. Pinho, L. Iannucci, and P. T. Curtis, Design and evaluation of a high rate mode I translaminar fracture toughness test for composite laminates, at the 15th European Conference on Composite Materials (ECCM15), 2012.

D. E. Munson and R. P. , Dynamically Determined High???Pressure Compressibilities of Three Epoxy Resin Systems, Journal of Applied Physics, vol.43, issue.3, pp.962-971, 1972.
DOI : 10.1063/1.1661315

W. J. Carter and S. P. Marsh, Hugoniot equation of state of polymers, 1995.
DOI : 10.2172/95183

N. R. Barnes, N. K. Bourne, and J. C. Millett, The Shock Hugoniot of an Epoxy Resin, AIP Conference Proceedings, pp.135-138, 2002.
DOI : 10.1063/1.1483500

J. C. Millett, N. K. Bourne, and N. R. Barnes, The behavior of an epoxy resin under one-dimensional shock loading, Journal of Applied Physics, vol.92, issue.11, pp.6590-9594, 2002.
DOI : 10.1063/1.1506389

G. Appleby-thomas, P. J. Hazell, and C. Stennett, The variation in lateral and longitudinal stress gauge response within an RTM6 epoxy resin under one-dimensional shock loading, J. Mat. Sci, issue.22, pp.44-6187, 2009.

N. K. Bourne, J. C. Millett, N. R. Barnes, and I. Belcher, The deviatoric response of an epoxy resin to onedimensional shock loading, Shock Compression of Condensed Matter-2001, AIP CP620, pp.649-652, 2002.

A. Gilat, R. K. Goldberg, and G. D. Roberts, High strain rate response of epoxy in tensile and shear loading, Journal de Physique IV (Proceedings), vol.110, p.123, 2003.
DOI : 10.1051/jp4:20020681

R. Gerlach, C. Siviour, N. Petrinic, and J. Wiegand, Experimental characterization and constitutive modelling of RTM6 resin under impact loading, pp.2728-2737, 2008.

N. K. Naik, R. Gadipatri, N. M. Thoram, V. R. Kanala, and V. Ch, Shear properties of epoxy under high strain rate loading, Polymer Engineering & Science, vol.39, issue.143, p.780, 2010.
DOI : 10.1002/pen.21585

N. K. Naik, P. J. Shankar, V. R. Kanala, G. Ravikumar, J. R. Pothnis et al., High strain rate mechanical behaviour of epoxy under compressive loading: Experimental and modelling studies, p.846, 2011.

S. A. Bordzilovskii, S. M. Karakhanov, and K. V. Khishchenko, Measurement of the brightness temperature of shock-compressed epoxy resin, Combustion, Explosion, and Shock Waves, pp.121-124, 2013.
DOI : 10.1134/S0010508213010140

J. Cognard, Some recent progress in adhesion technology and science, Comptes Rendus Chimie, vol.9, issue.1, pp.13-24, 2006.
DOI : 10.1016/j.crci.2004.11.016

G. Fourche, An overview of the basic aspects of polymer adhesion. Part I: Fundamentals, Polymer Engineering and Science, vol.57, issue.12, pp.957-67, 1995.
DOI : 10.1002/pen.760351202

S. Yang, L. Gu, and R. F. Gibson, Nondestructive detection of weak joints in adhesively bonded composite structures, Composite Structures, vol.51, issue.1, pp.63-71, 2001.
DOI : 10.1016/S0263-8223(00)00125-2

J. Bikerman, The science of adhesive joints, 1961.

P. Cognard, Technical Characteristics and Testing Methods for Adhesives and Sealants, Handbook of Adhesives and Sealants, 2005.

P. Baur, A. Roy, P. Casari, D. Choqueuse, and P. Davies, Structural mechanical testing of a full-size adhesively bonded motorboat, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment December 1, pp.259-265, 2004.
DOI : 10.1177/147509020421800405

J. Y. Cognard, P. Davies, B. Gineste, and L. Sohier, Development of an improved adhesive test method for composite assembly design, Composites Science and Technology, vol.65, issue.3-4, pp.359-368, 2005.
DOI : 10.1016/j.compscitech.2004.09.008

J. Y. Cognard, P. Davies, L. Sohier, and R. , Créac'hcadec, A study of the non-linear behaviour of adhesivelybonded composite assemblies, pp.34-46, 2006.

P. Davies, L. Sohier, J. Y. Cognard, A. Bourmaud, D. Choqueuse et al., Influence of adhesive bond line thickness on joint strength, International Journal of Adhesion and Adhesives, vol.29, issue.7, pp.724-736, 2009.
DOI : 10.1016/j.ijadhadh.2009.03.002
URL : https://hal.archives-ouvertes.fr/hal-00494459

C. Badulescu, J. Y. Cognard, R. Créac-'hcadec, and P. Vedrine, Analysis of the low temperature-dependent behaviour of a ductile adhesive under monotonic tensile/compression???shear loads, International Journal of Adhesion and Adhesives, vol.36, pp.56-64, 2012.
DOI : 10.1016/j.ijadhadh.2012.03.009
URL : https://hal.archives-ouvertes.fr/hal-00691399

D. Thevenet, R. Créac-'hcadec, L. Sohier, and J. Y. Cognard, Experimental analysis of the behavior of adhesively bonded joints under tensile/compression???shear cyclic loadings, International Journal of Adhesion and Adhesives, vol.44, pp.15-25, 2013.
DOI : 10.1016/j.ijadhadh.2013.01.011
URL : https://hal.archives-ouvertes.fr/hal-00825563

M. Bordes, P. Davies, J. Cognard, L. Sohier, V. Sauvant-moynot et al., Prediction of long term strength of adhesively bonded steel/epoxy joints in sea water, International Journal of Adhesion and Adhesives, vol.29, issue.6, pp.595-608, 2009.
DOI : 10.1016/j.ijadhadh.2009.02.013
URL : https://hal.archives-ouvertes.fr/hal-00392148

J. Y. Cognard, L. Sohier, and P. Davies, A modified Arcan test to analyze the behavior of composites and their assemblies under out-of-plane loadings, Composites Part A: Applied Science and Manufacturing, vol.42, issue.1, pp.111-121, 2011.
DOI : 10.1016/j.compositesa.2010.10.012

L. Sohier, J. Y. Cognard, and P. Davies, Analysis of the mechanical behaviour of adhesively bonded assemblies of composites under tensile???shear out-of-plane loads, Composites Part A: Applied Science and Manufacturing, vol.53, pp.65-74, 2013.
DOI : 10.1016/j.compositesa.2013.05.008
URL : https://hal.archives-ouvertes.fr/hal-00913441

S. Austin, P. Robins, and Y. Pan, Shear bond testing of concrete repairs, Cement and Concrete Research, vol.29, issue.7, pp.1067-1076, 1999.
DOI : 10.1016/S0008-8846(99)00088-5

S. Chataigner, J. Caron, K. Benzarti, M. Quiertant, and C. Aubagnac, Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces, Construction and Building Materials, pp.468-478, 2011.
DOI : 10.1016/j.conbuildmat.2010.08.009
URL : https://hal.archives-ouvertes.fr/hal-00526080

D. S. Santos, P. M. Santos, and D. Dias-da-costa, Effect of surface preparation and bonding agent on the concrete-to-concrete interface strength, Construction and Building Materials, pp.102-110, 2012.
DOI : 10.1016/j.conbuildmat.2012.07.028

G. Lawcock, L. Ye, Y. Mai, and C. Sun, The effect of adhesive bonding between aluminum and composite prepreg on the mechanical properties of carbon-fiber-reinforced metal laminates, Composites Science and Technology, vol.57, issue.1, pp.35-45, 1997.
DOI : 10.1016/S0266-3538(96)00107-8

J. Kweon, J. Jung, T. Kim, J. Choi, and D. Kim, Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding, Composite Structures, vol.75, issue.1-4, pp.192-198, 2006.
DOI : 10.1016/j.compstruct.2006.04.013

H. A. Al-zubaidy, X. Zhao, and R. , Dynamic bond strength between CFRP sheet and steel, Composite Structures 94, pp.3258-3270, 2012.
DOI : 10.1016/j.compstruct.2012.04.025

H. Al-zubaidy, R. Al-mahaidi, and X. Zhao, Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads, Composite Structures, vol.94, issue.2, pp.510-518, 2012.
DOI : 10.1016/j.compstruct.2011.08.018

H. Al-zubaidy, R. Al-mahaidi, and X. Zhao, Mechanical characterisation of the dynamic tensile properties of CFRP sheet and adhesive at medium strain rates, Composite Structures 96, pp.153-164, 2013.
DOI : 10.1016/j.compstruct.2012.09.032

H. Yun, W. Choi, and S. Seo, Acoustic emission activities and damage evaluation of reinforced concrete beams strengthened with CFRP sheets, NDT & E International, vol.43, issue.7, pp.615-628, 2010.
DOI : 10.1016/j.ndteint.2010.06.006

M. Kempf, O. Skrabala, and V. Altstädt, Acoustic emission analysis for quantitative characterisation of the damage behaviour in fibre reinforced composites under static and dynamic loading, 15th European Conference on Composite Materials (ECCM15), 2012.

H. Zhang and D. Y. Li, Determination of interfacial bonding strength using a cantilever bending method with in situ monitoring acoustic emission, Surface and Coatings Technology, vol.155, issue.2-3, pp.190-194, 2002.
DOI : 10.1016/S0257-8972(02)00059-2

A. G. Magalhaesa and M. F. De-mourab, Application of acoustic emission to study creep behaviour of composite bonded lap shear joints, NDT & E International, vol.38, issue.1, pp.45-52, 2005.
DOI : 10.1016/j.ndteint.2004.06.005

D. N. Markatos, K. I. Tserpes, E. Rau, S. Markus, B. Ehrhart et al., The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use, Composites Part B: Engineering, vol.45, issue.1, pp.556-564, 2013.
DOI : 10.1016/j.compositesb.2012.05.052

L. Berthe, Processus de claquage de milieux transparents sous irradiation laser Application au choc laser en régime de confinement par eau, 1998.

L. M. Baker, Laser Interferometry in Shock-wave Research, published in Experimental Mechanics, pp.209-215, 1971.

H. Daniel and . Dolan, Foundations of VISAR analysis, Sandia Report, 1950.

J. Cuq-lelandais, Etude du comportement dynamique de matériaux sous choc laser sub-picoseconde, Thèse de l'ENSMA (Ecole Nationale, 2010.

P. Mercier, J. Benier, A. Azzolina, J. M. Lagrange, and D. Partouche, Photonic Doppler velocimetry in shock physics experiments, presented at Dymat, 8th International conference on mechanical and physical behaviour of materials under dynamic loading, 2006.

P. Mercier, J. Benier, A. Sollier, M. R. Glohaec, E. Lescoute et al., Velocity Heterodyne measurements under high power laser shock into solids, presented at APS Shock Physics, 2009.

P. A. Frugier, P. Mercier, J. Benier, E. Dubreuil, and J. Veaux, New Heterodyne Velocimetry and shock physics PDV and shock physics. SPIE -Optics and photonics, 2009.

J. Benier, P. Mercier, E. Dubreuil, J. Veaux, and P. A. Frugier, New Heterodyne Velocimetry and shock physics, presented at DYMAT, 2009.

P. Mercier, J. Benier, P. A. Frugier, M. Debruyne, and B. Crouzet, Nitromethane ignition observed with embedded PDV optical fibers, presented to 8th International Conference " New models and hydrocodes for shock wave processes in condensed matter, pp.24-28, 2010.

D. Loison, Etude expérimentale et numérique du micro écaillage de cibles métalliques soumises à des chocs laser, Thèse de l'ENSMA (Ecole Nationale, p.2012

E. Lescoute, Etude de la fragmentation dynamique de métaux sous choc laser, Thèse de l'ENSMA (Ecole Nationale Supérieure de Mécanique et d'Aérotechnique), Ecole doctorale SIMMEA, 2010.

R. E. Setchell, Refractive index of sapphire at 532 nm under shock compression and release, Journal of Applied Physics, vol.91, issue.5, p.2833, 2002.
DOI : 10.1063/1.1446219

D. E. Fratanduono, J. H. Eggert, T. R. Boehly, M. A. Barrios, and D. D. , Index of refraction of shock-released materials, Journal of Applied Physics, vol.110, issue.8, p.83509, 2011.
DOI : 10.1063/1.3650258

. Schlieren, Shadowgraph techniques, visualizing phenomena in transparent media, G.S. Settles

H. Aben, L. Ainola, and J. Anton, Integrated photoelasticity for nondestructive residual stress measurement in glass, Optics and Lasers in Engineering, vol.33, issue.1, pp.49-64, 2000.
DOI : 10.1016/S0143-8166(00)00018-X

H. Aben, Integrated Photoelasticity, 1979.
DOI : 10.1007/978-3-642-50071-8_6

J. L. Freire and A. Voloshin, Photoelasticity, Experimental mechanics http

B. Gentilleau, M. Bertin, F. Touchard, and J. Grandidier, Stress analysis in specimens made of multi-layer polymer/composite used for hydrogen storage application: Comparison with experimental results, Composite Structures, vol.93, issue.11, pp.2760-2767, 2011.
DOI : 10.1016/j.compstruct.2011.05.028

M. Bertin, F. Touchard, and M. Lafarie-frenot, Experimental study of the stacking sequence effect on polymer/composite multi-layers submitted to thermomechanical cyclic loadings, International Journal of Hydrogen Energy, vol.35, issue.20, pp.11397-11404, 2010.
DOI : 10.1016/j.ijhydene.2010.07.018

J. P. Colombier, P. Combis, and F. Bonneau, Hydrodynamic simulations of metal ablation by femtosecond laser irradiation, Issue: 16 Published: 2005 DOI: 165406 10.1103/PhysRevB, p.71165406
DOI : 10.1103/PhysRevB.71.165406
URL : https://hal.archives-ouvertes.fr/hal-00121833

J. P. Cuq-lelandais, M. Boustie, and L. Berthe, Spallation generated by femtosecond laser driven shocks in thin metallic targets Article Number: 065402 DOI: 10, Journal of physics D-Applied Physics, vol.42, issue.66, pp.420022-3727, 1088.

C. R. Phipps, single???pulse lasers, Journal of Applied Physics, vol.64, issue.3, p.1083, 1988.
DOI : 10.1063/1.341867

. Grün, Characteristics of ablation plasma from planar, laser???driven targets, Applied Physics Letters, vol.39, issue.7, p.545, 1981.
DOI : 10.1063/1.92788

M. Boustie, J. Cuq-lelandais, L. Berthe, C. Bolis, S. Barradas et al., Study of damage phenomena induced by edge effects into materials under laser driven shocks, Journal of Physics D: Applied Physics, vol.40, issue.22, pp.40-7103, 2007.
DOI : 10.1088/0022-3727/40/22/036
URL : https://hal.archives-ouvertes.fr/hal-00192717

J. Cuq-lelandais, M. Boustie, L. Berthe, P. Combis, A. Sollier et al., Two-dimensional investigation of laser shock induced spallation in subpicosecond regime, Soulard et J. Bontaz-Carion, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00471161

A. Ravasio, Hard x-ray radiography for density measurement in shock compressed matter, Physics of Plasmas, vol.15, issue.6, p.60701, 2008.
DOI : 10.1063/1.2928156

J. Cuq-lelandais, Etude du comportement dynamique de matériaux sous choc laser sub-picoseconde, Thèse de l'ENSMA (Ecole Nationale, 2010.

E. A. Abdallah, C. Bouvet, S. Rivallant, B. Broll, and J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.1238-1245, 2009.
DOI : 10.1016/j.compscitech.2009.02.029

F. Lachaud, C. Espinosa, and L. Michel, Impact damage of carbone-epoxy laminates " presented at the 17 th JNC Conference, Journée Nationale des Composites), 2011.

N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, The effect of stacking sequence on the low-velocity impact response of composite laminates

R. F. El-hajjar and D. R. Petersen, Gaussian Function Characterization of Unnotched Tension Behavior in a Carbon, Epoxy Composite Containing localized fiber waviness, Composite structures, 2011.

E. Gay, L. Berthe, M. Boustie, M. Arrigoni, P. Mercier et al., Experimental study of composite damage under laser shock, presented at the 17 ème Journée Nationale des Composites (JNC 17), 2011.

E. Gay, L. Berthe, E. Buzaud, M. Boustie, and M. Arrigoni, Shock adhesion test for composite bonded assembly using a high pulsed power generator, Journal of Applied Physics, vol.114, issue.1, p.13502, 2013.
DOI : 10.1063/1.4811696
URL : https://hal.archives-ouvertes.fr/hal-00869736

M. Illyas, C. Espinosa, F. Lachaud, and M. Salaün, Simulation of Dynamic delamination and Mode I energy dissipation, presented at the 7th international LS-DYNA Users Conference, 2009.

M. Ilyas, F. Lachaud, C. Espinosa, L. Michel, and M. Salaün, Dynamic delamination modeling of unidirectional composites by cohesive finite elements, presented at the 16th Journée Nationales sur les Composites (JNC16), pp.10-12, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00389645

S. Heimbs, S. Heller, and P. Middendorf, Simulation of Low Velocity Impact on Composite Plates with compressive Preload, LS-DYNA Anwenderforum, 2008.

F. K. Chang and K. Y. Chang, A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.21, issue.9, pp.834-855, 1987.
DOI : 10.1177/002199838702100904

B. S. Thatte, G. S. Chandekar, A. D. Kelkar, and P. Chaphalkar, Studies on Behavior of Carbon and Fiberglass Epoxy Composite Laminates under low velocity Impact Loading using LS-DYNA, presented at the 10th International LS-DYNA Users' Conference, 2008.

R. Haynes, X. Tan, and E. Armanios, Effects of Barely Impact Damage on Bend-Twist coupling, presented at the 26th Annual Technical Conference of ASC, 2011.

Z. Zhang and F. Taheri, Dynamic pulsebulking analysis of FRP Composite laminated Beams Using LS-DYNA, presented at the 7th international LS-DYNA Users Conference, 2009.

R. Craven, L. Iannucci, and R. Olsson, Delamination buckling: A finite element study with realistic delamination shapes, multiple delaminations and fibre fracture cracks, Composites Part A: Applied Science and Manufacturing, vol.41, issue.5, pp.684-692, 2010.
DOI : 10.1016/j.compositesa.2010.01.019

M. Anghileri, L. Castelletti, A. Milanese, and A. Semboloni, Modeling Hailstone Impact onto Composite Material Panel Under a Multi-axial State of Stress, presented at the 6th European LS-DYNA Users' Conference, 2007.

H. D. Espinosa, S. Dwivedi, and H. Lu, Modeling impact induced delamination of woven fiber reinforced composites with contact/cohesive laws, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.259-290, 2000.
DOI : 10.1016/S0045-7825(99)00222-4

O. Allix, M. Dommanget, M. Gratton, and P. Héreil, A multi-scale approach for the response of a 3D carbon/carbon composite under shock loading, published in Composites Science and Technology, pp.61-409, 2001.

C. Yen, Ballistic impact modeling of composite materials, presented at the 7th international LS-DYNA Users Conference, 2009.

L. J. Deka, U. K. Vaidya, and . Ls-dyna, Impact Simulation of Composite Sandwich Structures with Balsa Wood Core, presented at the 10th International LS-DYNA Users' Conference, 2008.

M. Loikkanen, G. Praveen, and D. Powell, Simulation of Ballistic Impact on Composite Panels, presented at the 10th International LS-DYNA Users' Conference, 2008.

. Ogihara, 3D simulation of high-velocity impact damage progress in the CFRP laminates, 15th European Conference on Composite Materials (ECCM15), 2012.

A. A. Lukyanov, An equation of state of a carbon-fibre epoxy composite under shock loading, published in Eur, Phys. J. B, vol.74, pp.35-45, 2010.

R. Vignjevic, N. Djordjevic, and T. D. Vuyst, Progressive damage in woven CFRP in presence of shock wave, presented at the 15th European Conference on Composite Materials (ECCM15), 2012.

M. Wicklein, S. Ryan, D. M. White, and R. A. Clegg, Hypervelocity impact on CFRP: Testing, material modelling, and numerical simulation, International Journal of Impact Engineering, vol.35, issue.12, pp.1861-1869, 2008.
DOI : 10.1016/j.ijimpeng.2008.07.015
URL : https://hal.archives-ouvertes.fr/hal-00542562

S. Ryan, M. Wicklein, A. Mouritz, W. Riedel, F. Schäfer et al., Theoretical prediction of dynamic composite material properties for hypervelocity impact simulations, International Journal of Impact Engineering, vol.36, issue.7, pp.899-912, 2009.
DOI : 10.1016/j.ijimpeng.2008.12.012
URL : https://hal.archives-ouvertes.fr/hal-00574818

D. Laporte, Analyse de la réponse d'assemblages collés sous des solicitations en dynamique rapide. Essais et modélisations, Thèse de l'ENSMA (Ecole Nationale, 2011.

D. Iliescu, D. Gehin, I. Iordanoff, F. Girot, and M. E. Gutiérrez, A discrete element method for the simulation of CFRP cutting, Composites Science and Technology, vol.70, issue.1, pp.73-80, 2010.
DOI : 10.1016/j.compscitech.2009.09.007

M. Jebahi, J. Charles, F. Dau, and L. , Illoul, I. Iordanoff, 3D coupling approach between discrete and continuum models for dynamic simulations (DEM?CNEM), published in Comput, Methods Appl. Mech. Engrg, pp.255-196, 2013.

S. Markus, Detection of Contaminants on Polymer Surfaces Using Laser Induced Breakdown Spectroscopy (LIBS) Polymer Surface Modification: Relevance to Adhesion, 2007.

K. Albinsky, K. Brune, S. Dieckhoff, O. Hesebeck, U. Lommatzsch et al., Advances in bonded repair of CFRP aircraft structures by surface inspection, presented at the 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 2012.

L. H. Pearson, Diffuse reflectance IR spectroscopy for bonding surface contamination, Review of Progress, published in Quantitative Nondestructive Evaluation, vol.10, 1991.

R. Wilken, EP 1893974 B1, Method and Device for Testing a Surface Quality, FhG zur Förderung der angewandten Forschung e.V. (date of publication, pp.2009-2013

S. Markus, C. Tornow, S. Dieckhoff, M. Boustie, R. Ecault et al., Bockenheimer Extended Non- Destructive Testing of Composite Bonds, SAE International Conference, pp.2011-2012, 2011.

F. Rock, N. Barsan, and U. Weimar, Electronic Nose:?? Current Status and Future Trends, Chemical Reviews, vol.108, issue.2, pp.705-725, 2008.
DOI : 10.1021/cr068121q

P. , D. Palma, S. D. Vito, M. Miglietta, E. Massera et al., CFRP Surface Contamination Detection by an Electronic Nose Device for Quality Assessment of Adhesive Bonds in Lightweight Aircraft Structures, at the 3rd International Conference of Engineering Against Failure (ICEAF III), pp.26-28, 2013.

K. Brune, S. Dieckhoff, M. Hoffmann, L. Lima, D. Stübing et al., Pre-bond Quality Assurance of CFRPsurfaces by using Optically Stimulated Electron Emission, presented at the Adhesion '13 Conference, 2013.

G. Walle, A thermal NDT technique for surface crack testing in conductive materials, Materials Testing, vol.9, 2009.

H. Aglan, Cumulative Fatigue Disbond of Adhesive Joints and its Detection using Thermal wave Imaging, Review of Progress in quantitative non-destructive evaluation, pp.431-438, 1995.
DOI : 10.1007/978-1-4615-1987-4_51

P. Malinowski, T. Wandowski, L. Skarbek, and W. Ostachowicz, Non-destructive assessment of CFRP composites with elastic waves, vibrothermography and EMI technique, presented at the 3rd International Conference of Engineering Against Failure (ICEAF III), pp.26-28, 2013.

L. P. Canal and V. Michaud, Microscopic mechanisms and modelling of water diffusivity in adhesive composite joints, to be published in Composites Part A: Applied Science and Manufacturing journal

P. Malinowski, T. Wandowski, and W. Ostachowicz, Assessment of CFRP Composites Using Laser Vibrometry, presented at the ISEM-ACEM-SEM-7th ISEM '12, 2012.

P. Malinowski, T. Wandowski, and W. Ostachowicz, Characterization of CFRP using piezoelectric transducer and laser vibrometry, presented at the 10 th International Conference on Damage Assessment of Structures, 2008.

G. Heichler, T. Grundner, and E. Rau, Ultrasonic Frequency Analysis, presented at the 3rd International Conference of Engineering Against Failure (ICEAF III) Ultrasonic Array Inspection of Weak Bonds, presented at the 3rd International Conference of Engineering Against Failure (ICEAF III), pp.26-28, 2013.