R. Riva, C. Buttay, B. Allard, and P. Bevilacqua, Migration issues in sintered-silver die attaches operating at high temperature, Microelectronics Reliability, vol.53, issue.9-11, pp.1592-1596, 2013.
DOI : 10.1016/j.microrel.2013.07.103
URL : https://hal.archives-ouvertes.fr/hal-00874458

A. Masson, W. Sabbah, R. Riva, C. Buttay, S. Azzopardi et al., Die attach using silver sintering. Practical implementation and analysis, European Journal of Electrical Engineering, vol.16, issue.3-4, pp.3-4, 2013.
DOI : 10.3166/ejee.16.293-305
URL : https://hal.archives-ouvertes.fr/hal-00874465

R. Ouaida, C. Buttay, A. Hoang, R. Riva, D. Bergogne et al., Thermal runaway robustness of SiC JFETs, Material Science Forum, pp.740-742, 2013.

R. Riva, C. Buttay, M. Locatelli, V. Bley, and B. Allard, Design and Manufacturing of a Double-Side Cooled, SiC based, High Temperature Inverter Leg International Conference on High Temperature Electronics (HITEC), 2014.
URL : https://hal.archives-ouvertes.fr/hal-00997365

W. Sabbah, R. Riva, S. Hascoët, C. Buttay, S. Azzopardi et al., Evaluation of silver-sintering die attach, Acte de la Conference on Integrated Power Systems (CIPS), 2012.
URL : https://hal.archives-ouvertes.fr/hal-00707733

A. Masson, W. Sabbah, R. Riva, C. Buttay, S. Azzopardi et al., Report de puce par frittage d'argent -Mise en oeuvre et analyse, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00729156

R. Ouaida, C. Buttay, A. Hoang, R. Riva, D. Bergogne et al., Thermal runaway robustness of SiC JFETs, Proceedings of the European Conference on Silicon Carbide and Related Materials, 2012.

R. Ouaida, C. Buttay, R. Riva, D. Bergogne, C. Raynaud et al., Thermal stability of SiC JFETs in conduction mode, 2013 15th European Conference on Power Electronics and Applications (EPE), 2013.
DOI : 10.1109/EPE.2013.6631881
URL : https://hal.archives-ouvertes.fr/hal-00874471

C. Buttay, Techniques de l'ingénieur Composants actifs en Electronique de puissance, 2013.

B. Mouawad, Assemblages innovants en électronique de puissance utilisant la technique de « spark plasma sintering, 2013.

V. Manikam and K. Y. Cheong, Die Attach Materials for High Temperature Applications: A Review, Components, Packaging and Manufacturing Technology, pp.457-478, 2011.
DOI : 10.1109/TCPMT.2010.2100432

J. Schulz-harder, Ceramic substrates and micro-channel cooler, " in ECPE seminar : High Temperature Electronic and Thermal management, 2006.

J. Calata, J. G. Bai, X. Liu, S. Wen, G. Lu et al., Three-dimensional packaging for power semiconductor devices and modules, IEEE Transactions on Advanced Packaging, vol.28, issue.3, pp.404-412, 2000.
DOI : 10.1109/TADVP.2005.852837

X. Cao, T. Wang, K. D. Ngo, and G. Lu, Parametric study of joint height for a medium-voltage planar package Components and Packaging Technologies, IEEE Transactions on, vol.33, issue.3, pp.553-562, 2010.

S. Wen, D. Huff, and G. Lu, Design and thermo-mechanical analysis of a Dimple-Array Interconnect technique for power semiconductor devices, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220), 2002.
DOI : 10.1109/ECTC.2001.927752

E. Vagnon, J. Crebier, Y. Avenas, and P. Jeannin, Study and realization of a low force 3D press-pack power module, 2008 IEEE Power Electronics Specialists Conference, pp.1048-1054, 2008.
DOI : 10.1109/PESC.2008.4592068
URL : https://hal.archives-ouvertes.fr/hal-00292635

. Semikron, Site officiel du fabricant, 2013.

J. V. Wyk and Z. Liang, New technologies for passive and active integrated power modules, CPES Power Electronics Seminar, 2005.

R. Fillion, E. Delgado, P. Mcconnelee, and R. Beaupre, A high performance polymer thin film power electronics packaging technology, SPIE proceedings series. Society of Photo-Optical Instrumentation Engineers, pp.408-414, 2002.

D. Bernache-assollant and J. Bonnet, Frittage : aspects physicochimiques partie 1 : frittage en phase solide Techniques de l'ingénieur Fondamentaux en chimie, 2013.

G. Bai, Low-temperature sintering of nanoscale silver paste for semiconductor device interconnection, 2005.

A. Masson, W. Sabbah, R. Riva, C. Buttay, S. Azzopardi et al., Report de puce par frittage d'argent -mise en oeuvre et analyse, Actes de Electronique de Puissance du Futur 2012 CD (ref 61). [Online]. Available, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00729156

A. Masson, Mise en oeuvre de techniques d'attaches de puces alternatives aux brasures pour des applications haute température, 2012.

S. Yang, J. Wu, and A. Christou, Initial stage of silver electrochemical migration degradation, Microelectronics Reliability, vol.46, issue.9-11, pp.1915-1921, 2006.
DOI : 10.1016/j.microrel.2006.07.080

S. Diaham, M. Locatelli, and Z. Valdez-nava, Dielectrics for High Temperature SiC Device Insulation: Review of New Polymeric and Ceramic Materials
DOI : 10.5772/24397

S. C. Systems, Parylene deposition process. [Online] Available : http://scscoatings.com/what_is_parylene/parylene_deposition. aspx [22] Keithley, Low Level Measurement Handbook, 2004.

S. De-l-'ingénieur, Janvier) Quelques types d'éléments finis, 2013.

K. Falahi, S. Hascoët, C. Buttay, P. Bevilacqua, L. V. Phung et al., High temperature, Smart Power Module for aircraft actuators, Proceedings of the conference on High Temperature Electronics Network, pp.euripides-Catrene, 2013.
DOI : 10.4071/HITEN-MP13
URL : https://hal.archives-ouvertes.fr/hal-00874666

W. W. Sheng and R. P. Colino, Power electronic modules : design and manufacture, 2004.
DOI : 10.1201/9780203507308

E. Indium-corporation-of, A. , and A. , Alloys sorted by temperature, 2013.

L. Ménager, Contribution à l'intégration des convertisseurs de puissance en 3d, 2008.

. Wikipedia, Janvier) Silicium. http ://fr.wikipedia.org/wiki/Silicium, 2014.

J. Kassakian and D. Perreault, The future of electronics in automobiles, Proceedings of the 13th International Symposium on Power Semiconductor Devices & ICs. IPSD '01 (IEEE Cat. No.01CH37216), pp.15-19, 2001.
DOI : 10.1109/ISPSD.2001.934550

P. Barrade, Electronique de puissance : methodologie et convertisseurs elementaires, 2006.

J. Arnould and P. Merle, Dispositifs de l'électronique de puissance -Volume 1, H. science publications, 1992.

B. Allard, Power electronics packaging -basics and functions, ECPE Seminar : Power Electronics Packaging, 2011.

J. Dorkel and J. , Semi-conducteurs de puissance problèmes thermiques (partie 1) Techniques de l'ingénieur Composants actifs en électronique de puissance, 2013.

C. Buttay, D. Planson, B. Allard, D. Bergogne, P. Bevilacqua et al., State of the art of high temperature power electronics, Materials Science and Engineering: B, vol.176, issue.4, pp.283-288, 2011.
DOI : 10.1016/j.mseb.2010.10.003
URL : https://hal.archives-ouvertes.fr/hal-00597432

H. Vang, Optimisation des étapes technologiques pour la fabrication de composants de puissance en carbure de silicium, 2006.

. Ioffre, Juin) Principal properties of semiconductors, 2013.

. Wikipedia, Aout) Tensile strength Available : http://simple. wikipedia.org, 2013.

C. Lucat, F. Meni, M. O. Rachidi, C. Zardini, C. S. Bontemps et al., Screen-printed copper superthick-films for power hybrids, IWIPP Proceedings. IEEE International Workshop on Integrated Power Packaging (Cat. No.98EX203), pp.44-45, 1998.
DOI : 10.1109/IWIPP.1998.722257

E. Parlex, J. Rastjagaev, B. Wilde, T. Wielage, S. Grund et al., Polymer thick film -material performance and reliability Available : http://www.parlex.com/tech_library Development and testing of cold gas sprayed circuit boards for power electronics applications, Integrated Power Electronics Systems (CIPS), 2012, 7th International Conference on, pp.1-6, 2010.

R. Johnson, C. Wang, Y. Liu, and J. Scofield, Power Device Packaging Technologies for Extreme Environments, IEEE Transactions on Electronics Packaging Manufacturing, vol.30, issue.3, pp.182-193, 2007.
DOI : 10.1109/TEPM.2007.899158

U. Scheuermann, Advanced interconnection technologies, ECPE Seminar, 2011.

C. Martin, L. Menager, B. Allard, J. M. Guichon, and J. L. Schanen, Importance of interconnect in integrated power systems, IEEE International Conference on Integrated Power Systems, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00194238

. Comelec, Le parylène -aspect général Available : http://www.comelec.ch/fr/parylene.php [45] S. C. Systems. (Décembre 2013) Parylene properties, 2013.

M. Szwarc, The C???H Bond Energy in Toluene and Xylenes, The Journal of Chemical Physics, vol.16, issue.2, pp.128-136, 1948.
DOI : 10.1063/1.1746794

M. Ciappa, Selected failure mechanisms of modern power modules Microelectronics Reliability, pp.653-667, 2002.

R. Amro, J. Lutz, J. Rudzki, M. Thoben, and A. Lindemann, Double-sided lowtemperature joining technique for power cycling capability at high temperature, Power Electronics and Applications, 2005 European Conference on, pp.10-10, 2005.

L. Dupont, Contribution à l'étude de la durée de vie des assemblages de puissance dans des environnements haute température et avec des cycles thermiques de grande amplitude, 2006.

A. Hamidi and P. Team, Introduction to semiconductor packaging in high power electronics, Seminaire ECPE : Power Electronics Packaging, 2004.

A. Hamidi, S. Kaufmann, and E. Herr, Increased lifetime of wire bonding connections for IGBT power modules, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181), 2001.
DOI : 10.1109/APEC.2001.912494

L. Dupont, Z. Khatir, S. Lefebvre, and S. Bontemps, Effects of metallization thickness of ceramic substrates on the reliability of power assemblies under high temperature cycling Microelectronics Reliability, proceedings of the 17th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis. Wuppertal, pp.1766-1771, 2006.

L. Menager, C. Martin, B. Allard, and V. Bley, Industrial and lab-scale power module technologies : A review, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, pp.2426-2431, 2006.
DOI : 10.1109/IECON.2006.347559
URL : https://hal.archives-ouvertes.fr/hal-00369385

S. Haque and G. Lu, Metallization for direct solder interconnection of power devices, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070), pp.1475-1482, 2000.
DOI : 10.1109/ECTC.2000.853407

S. Cho, J. Kim, M. Park, I. Park, and H. Chun, Under bump metallurgies for a wafer level csp with eutectic Pb-Sn solder ball, Electronic Components amp ; Technology Conference, pp.844-849, 2000.

S. Jittinorasett, Ubm formation on single die/dice for flip chip applications, 1999.

J. Bai, J. Calata, and G. Lu, Comparative thermal and thermomechanical analyses of solder-bump and direct-solder bonded power device packages having double-sided cooling capability, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04., pp.1240-1246, 2004.
DOI : 10.1109/APEC.2004.1295981

C. Buttay, J. Rashid, C. Johnson, F. Udrea, G. Amaratunga et al., Compact Inverter Designed for High-Temperature Operation, 2007 IEEE Power Electronics Specialists Conference, pp.2241-2247, 2007.
DOI : 10.1109/PESC.2007.4342357

G. Rinne, Solder bumping methods for flip chip packaging, 1997 Proceedings 47th Electronic Components and Technology Conference, pp.240-247, 1997.
DOI : 10.1109/ECTC.1997.606176

S. Wen, Design and analysis of a dimple array interconnect technique for power electronics packaging, 2002.

M. Mermet-guyennet, New structure of power integrated module, Integrated Power Systems (CIPS) 4th International Conference on, pp.1-6, 2006.

S. Haque, K. Xing, R. Lin, C. T. Suchicital, G. Lu et al., An innovative technique for packaging power electronic building blocks using metal posts interconnected parallel plate structures Advanced Packaging, IEEE Transactions on, vol.22, issue.2, pp.136-144, 1999.

S. Haque, K. Xing, C. Suchicital, D. Nelson, G. Lu et al., Thermal management of high-power electronics modules packaged with interconnected parallel plates, Fourteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.98CH36195), pp.111-119, 1998.
DOI : 10.1109/STHERM.1998.660395

F. Mulski, Semiconductor devices adapted for pressure mounting United- States Patent Available : https, p.472, 1969.

J. Vobecky and D. Kolesnikov, Reliability of contacts for press-pack highpower devices Microelectronics Reliability, proceedings of the 16th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis. [Online]. Available, pp.1676-1681, 2005.

P. Electronique, Les modules de puissance gagnent en fiabilité grâce aux contacts ressorts, pp.46-47, 2006.

F. Lang and U. Scheuermann, Reliability of spring pressure contacts under environmental stress Microelectronics Reliability, 18th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis. [Online]. Available, pp.1761-1766, 2007.

Z. Liang and F. Lee, Embedded power technology for IPEMs packaging applications, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181), pp.1057-1061, 2001.
DOI : 10.1109/APEC.2001.912497

B. Ozmat, C. Korman, P. Mcconnelee, M. Kheraluwala, E. Delgado et al., A new power module packaging technology for enhanced thermal performance, ITHERM 2000. The Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.00CH37069), pp.287-296, 2000.
DOI : 10.1109/ITHERM.2000.866204

R. Singh, Reliability and performance limitations in SiC power devices, Microelectronics Reliability, vol.46, issue.5-6, pp.713-730, 2006.
DOI : 10.1016/j.microrel.2005.10.013

M. Bakowski, U. Gustafsson, and Z. Ovuka, Walk-out phenomena in 6H-SiC mesa diodes with SiO2/Si3N4 passivation and charge trapping in dry and wet oxides on N-type 6H-SiC, Microelectronics Reliability, vol.38, issue.3, pp.381-392, 1998.
DOI : 10.1016/S0026-2714(97)00061-9

S. Diaham, Etude du comportement sous haute température de matériaux polyimides en vue de la passivation de composants de puissance à semiconducteurs grand gap, 2007.

S. Hascoet, Mise en oeuvre de nouveaux matériaux d'assemblage dans les modules multipuces de puissance (mcm), 2013.

. Intercarat, Frittage et moulage de pièces en PTFE, 2013.

H. Godfroid, Les métaux en poudre comprimée dits "frittés Société des ingénieurs de l'automobile, 1946.

C. Herring, Effect of Change of Scale on Sintering Phenomena, Journal of Applied Physics, vol.21, issue.4, pp.301-303, 1950.
DOI : 10.1063/1.1699658

. Wikipedia, Janvier) Loi d'Arrhenius. [Online] Available : http://fr. wikipedia.org/wiki, 2014.

R. Manepalli, F. Stepniak, S. Bidstrup-allen, and P. A. Kohl, Silver metallization for advanced interconnects Advanced Packaging, IEEE Transactions on, vol.22, issue.1, pp.4-8, 1999.

H. Schwarzbauer and R. Kuhnert, Novel large area joining technique for improved power device performance, IEEE Transactions on Industry Applications, vol.27, issue.1, pp.93-95, 1991.
DOI : 10.1109/28.67536

C. Goebl, P. Beckedahl, and H. Braml, Low temperature sinter technology die attachment for automotive power electronic applications, Automotive Power Electronics, 2006.

Y. Mei, D. Ibitayo, X. Chen, S. Luo, and G. Lu, Migration of sintered nanosilver die-attach material on alumina substrate at high temperatures, Proceedings of the IMAPS International Conference and Exhibition on on High Temperature ElectronicsNM) : IMAPS, pp.26-31, 2010.

J. Steppan, J. Roth, L. Hall, D. Jeannotte, and S. Carbone, ChemInform Abstract: A Review of Corrosion Failure Mechanisms During Accelerated Tests. Electrolytic Metal Migration, ChemInform, vol.134, issue.18, pp.175-190, 1987.
DOI : 10.1002/chin.198718381

S. J. Krumbein, Metallic electromigration phenomena Components, Hybrids , and Manufacturing Technology, IEEE Transactions on, vol.11, issue.1, pp.5-15, 1988.

G. Harsanyi, Electrochemical processes resulting in migrated short failures in microcircuits, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.18, issue.3, pp.602-610, 1995.
DOI : 10.1109/95.465159

W. F. Gorham, A New, General Synthetic Method for the Preparation of Linear Poly-p-xylylenes, Journal of Polymer Science Part A-1: Polymer Chemistry, vol.4, issue.12, pp.3027-3039, 1966.
DOI : 10.1002/pol.1966.150041209

. Comelec, Le parylène -tableaux techniques, 2013.

B. Boettge, S. Klengel, J. Schischka, G. Lorenz, and H. Knoll, Microstructural and mechanical characterization of ceramic substrates with different metallization for power applications, Integrated Power Electronics Systems (CIPS), 2012, 7th International Conference on, pp.1-6, 2012.

. Wikipedia, Available : http: //en.wikipedia.org/wiki, Janvier) Electrical resistivity and conductivity. [Online]. Available, 2014.

. Matweb, Janvier) Material property data Available : http: //www.matweb.com [96] Wikipedia. (2013, Mars) Rigidité diélectrique, 2014.

. Kyocera, Amb (active metal bonding) substrate for power module, Tech. Rep, 2013.

P. Yimsiri and M. Mackley, Spin and dip coating of light-emitting polymer solutions: Matching experiment with modelling, Chemical Engineering Science, vol.61, issue.11, pp.3496-3505, 2006.
DOI : 10.1016/j.ces.2005.12.018

S. Kraft, A. Schletz, and M. März, Reliability of Silver Sintering on DBC and DBA Substrates for Power Electronic Applications, Integrated Power Electronics Systems (CIPS), 2012 7th International Conference on, pp.1-6, 2012.