E. Rogers, Diffusion of Innovations 5th Edition, pp.234-281, 2003.

S. Ram and J. N. Sheth, Consumer Resistance to Innovations: The Marketing Problem and its solutions, Journal of Consumer Marketing, vol.6, issue.2, pp.5-13, 1989.
DOI : 10.1108/EUM0000000002542

J. N. Sheth and S. Ram, Bringing innovation to market: how to break corporate and customer barriers, pp.3-4, 1987.

S. Ram and J. N. Sheth, Marketing Barriers to Innovations: The case of the Entrepreneur, AMA Symposium on Research Activities in Marketing Entrepreneurship, pp.403-409, 1988.

G. E. Moore, Cramming More Components Onto Integrated Circuits, reproduced in IEEE Proceedings, pp.82-85, 1965.
DOI : 10.1109/JPROC.1998.658762

R. H. Dennard, F. H. Gänßlen, and H. N. Yu, Design of Ion-Implanted MOSFET's with Very Small Physical Dimensions, IEEE Solid-State Circuits Newsletter, vol.12, issue.1, pp.256-268, 1974.
DOI : 10.1109/N-SSC.2007.4785543

M. Kawano, S. Uchiyama, and Y. Egawa, A 3D Packaging Technology for 4 Gbit Stacked DRAM with 3 Gbps Data Transfer, 2006 International Electron Devices Meeting, pp.1-3, 2006.
DOI : 10.1109/IEDM.2006.346849

R. A. Fournelle, Lead-free solders and processing issues in microelectronics, JOM, vol.31, issue.11, p.49, 2003.
DOI : 10.1007/s11837-003-0140-9

G. Philip, Wafer Level Chip Scale Packaging (WL-CSP): An Overview, IEEE, Transactions Advanced Packaging, vol.23, issue.2, pp.198-205, 2000.

Y. Nishi and R. Doering, Handbook of Semiconductor Manufacturing Technology, pp.30-35, 2007.

C. Auth, C. Allen, and A. Blattner, A 22nm high performance and low-power CMOS technology featuring fully-depleted tri-gate transistors, self-aligned contacts and high density MIM capacitors, 2012 Symposium on VLSI Technology (VLSIT), pp.2012-131
DOI : 10.1109/VLSIT.2012.6242496

C. Jan, U. Bhattacharya, and R. Brain, A 22nm SoC platform technology featuring 3-D tri-gate and high-k/metal gate, optimized for ultra low power, high performance and high density SoC applications, 2012 International Electron Devices Meeting, pp.44-47, 2012.
DOI : 10.1109/IEDM.2012.6478969

R. H. Havemann and J. A. Hutchby, High-performance interconnects: an integration overview, Proceedings of the IEEE, vol.89, issue.5, pp.586-601, 2001.
DOI : 10.1109/5.929646

S. Borkar, Design challenges of technology scaling, IEEE Micro, vol.19, issue.4, pp.23-29, 1999.
DOI : 10.1109/40.782564

S. E. Thompson and S. Parthasarathy, Moore's law: the future of Si microelectronics, Materials Today, vol.9, issue.6, pp.20-25, 2006.
DOI : 10.1016/S1369-7021(06)71539-5

G. Messner, Cost-Density Analysis of Interconnections, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.10, issue.2, pp.143-151, 1987.
DOI : 10.1109/TCHMT.1987.1134733

K. Rupp and S. Selberherr, The Economic Limit to Moore's Law, IEEE Transactions on Semiconductor Manufacturing, vol.24, issue.1, pp.1-3, 2011.
DOI : 10.1109/TSM.2010.2089811

. International-monetary-fund, World Ecomoic Outlook Update, pp.1-8

R. K. Cavin, P. Lugli, and V. V. Zhirnov, Science and Engineering Beyond Moore's Law, Proceedings of the IEEE, vol.100, issue.Special Centennial Issue, pp.1720-1749, 2012.
DOI : 10.1109/JPROC.2012.2190155

W. Arden, M. Brillouët, and P. Cogez, Towards a Moore Than Moore Roadmap, CATRENE © Scientific Committee, 2011.

R. W. Johnson, J. L. Evans, and P. Jacobsen, The Changing Automotive Environment: High-Temperature Electronics, IEEE Transactions on Electronics Packaging Manufacturing, vol.27, issue.3, pp.164-176, 2004.
DOI : 10.1109/TEPM.2004.843109

M. L. Elgizawy, Continuous Measurement-While-Drilling Surveying System Utilizing MEMS Inertial Sensors, Dissertation, 2009.

F. G. Kuper, Automotive IC reliability: Elements of the battle towards zero defects, Microelectronics Reliability, vol.48, issue.8-9, pp.1459-1463, 2008.
DOI : 10.1016/j.microrel.2008.06.026

R. Kisiel and Z. Szczepa?ski, Trends in assembling of advanced IC packages, Journal of Telecommunication and Information technology, pp.63-69, 2005.

R. R. Tummala, E. J. Rymaszewski, and A. G. Klopfenstein, Microelectronics Packaging Handbook, pp.65-470, 1997.

K. Dehaven and J. Dietz, Controlled collapse chip connection (C4)-an enabling technology, 1994 Proceedings. 44th Electronic Components and Technology Conference, pp.1-6, 1994.
DOI : 10.1109/ECTC.1994.367660

P. Ramm, J. J. Lu, and M. M. Taklo, Handbook of Waferbonding, pp.162-167

J. Cheng-lin, J. Yu, and B. Chung, Development on Ultra High Density Memory Package with PoP Structure, IEEE, pp.1136-1140

L. Meinshausen, K. Weide-zaage, and H. Frémont, Thermal management for stackable packages with stacked ICs, 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, pp.1-6
DOI : 10.1109/ESimE.2012.6191700

H. Gan, S. L. Wright, and R. Polastre, Pb-free Micro-joints (50 ?m pitch) for the Next Generation Micro-systems: the Fabrication, Assembly and Characterization, IEEE, Electronic Components and Technology Conference, pp.1210-1215, 2006.

S. Gee, N. Kelkar, and J. Huang, Lead-Free and PbSn Bump Electromigration Testing, Advances in Electronic Packaging, Parts A, B, and C, pp.1-9, 2005.
DOI : 10.1115/IPACK2005-73417

B. Salam, N. N. Ekere, and D. Rajkumar, Study of the interface microstructure of Sn-Ag-Cu lead-free solders and the effect of solder volume on intermetallic layer formation, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220), pp.1-7, 2001.
DOI : 10.1109/ECTC.2001.927769

L. Meinshausen, H. Frémont, and K. Weide-zaage, Migration induced IMC formation in SAC305 solder joints on Cu, NiAu and NiP metal layers, Microelectronics Reliability, vol.52, issue.9-10, pp.10-1827, 2012.
DOI : 10.1016/j.microrel.2012.06.127
URL : https://hal.archives-ouvertes.fr/hal-00745990

M. Abtewa and G. Selvaduray, Lead-free Solders in Microelectronics, Materials Science and Engineering: R: Reports, vol.27, issue.5-6, pp.95-141, 2000.
DOI : 10.1016/S0927-796X(00)00010-3

P. G. Shewmon, Diffusion in Solids, pp.37-54, 1989.
DOI : 10.1007/978-3-319-48206-4

J. Philibert, Creep and diffusion, Solid State Ionics, vol.12, pp.321-336, 1984.
DOI : 10.1016/0167-2738(84)90161-9

M. D. Mathew, H. Yang, and S. Movva, Creep deformation characteristics of tin and tin-based electronic solder alloys, Metallurgical and Materials Transactions A, vol.27, issue.1, pp.99-105, 2005.
DOI : 10.1007/s11661-005-0142-z

M. R. Werner, Review on materials, microsensors, systems and devices for high-temperature and harsh-environment applications, IEEE Transactions on Industrial Electronics, vol.48, issue.2, pp.249-257, 2001.
DOI : 10.1109/41.915402

R. Klieber, Evaluation of materials for high temperature IC packaging, 15th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), pp.117-120, 2009.

R. G. Azevedo, A SiC MEMS Resonant Strain Sensor for Harsh Environment Applications, IEEE Sensors Journal, vol.7, issue.4, pp.568-576, 2007.
DOI : 10.1109/JSEN.2007.891997

K. N. Chen, Microstructure examination of copper wafer bonding, Journal of Electronic Materials, vol.71, issue.23, pp.331-335, 2001.
DOI : 10.1007/s11664-001-0039-6

T. H. Kim, M. M. Howlader, and T. Itoh, Room temperature Cu???Cu direct bonding using surface activated bonding method, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.21, issue.2, pp.449-453
DOI : 10.1116/1.1537716

P. Gueguen, L. Di-cioccio, and P. Gergaud, Copper Direct-Bonding Characterization and Its Interests for 3D Integration, pp.31-37, 2008.
DOI : 10.1149/1.3187271

E. Ide, S. Angata, and A. Hirose, Metal?metal bonding process using Ag metallo-organic nanoparticles, Acta Materialia, vol.53, issue.8, pp.2385-2393, 2005.
DOI : 10.1016/j.actamat.2005.01.047

G. Zou, J. Yan, and F. Mu, Low Temperature Bonding of Cu Metal through Sintering of Ag Nanoparticles for High Temperature Electronic Application, The Open Surface Science Journal, vol.3, issue.1, pp.70-75, 2011.
DOI : 10.2174/1876531901103010070

A. Hu, J. Y. Guo, and H. Alarifi, Low temperature sintering of Ag nanoparticles for flexible electronics packaging, Applied Physics Letters, vol.97, issue.15, pp.1-3, 2010.
DOI : 10.1063/1.3502604

A. Moujbani, J. Kludt, and K. Weide-zaage, Dynamic simulation of migration induced failure mechanism in integrated circuit interconnects, Microelectronics Reliability, vol.53, issue.9-11, pp.1365-1369, 2013.
DOI : 10.1016/j.microrel.2013.07.097

N. Watanabe, T. Kojima, and T. Asano, Wafer-level compliant bump for three-dimensional LSI with high-density area bump connections, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest., pp.671-673, 2005.
DOI : 10.1109/IEDM.2005.1609440

I. Tuah-poku, M. Dollar, and T. B. Massalski, A study of the transient liquid phase bonding process applied to a Ag/Cu/Ag sandwich joint, Metallurgical Transactions A, vol.3, issue.3, pp.675-686, 1988.
DOI : 10.1007/BF02649282

R. Agarwal, W. Zhang, and P. Limaye, Cu/Sn microbumps interconnect for 3D TSV chip stacking, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC), pp.858-863, 2010.
DOI : 10.1109/ECTC.2010.5490698

K. Guth, D. Siepe, and J. Görlich, New assembly and interconnects beyond sintering methods, Power Conversion and Inteligent Motion (PCIM), pp.1-6, 2010.

K. S. Kim, S. H. Huh, and K. Suganuma, Effects of intermetallic compounds on properties of Sn???Ag???Cu lead-free soldered joints, Journal of Alloys and Compounds, vol.352, issue.1-2, pp.226-236, 2003.
DOI : 10.1016/S0925-8388(02)01166-0

H. B. Fan, E. K. Chan, and C. K. Wong, Moisture Diffusion Study in Electronic Packaging using Molecular Dynamic Simulation, 56th Electronic Components and Technology Conference 2006, pp.1425-1428, 2006.
DOI : 10.1109/ECTC.2006.1645843

M. Kitano, A. Nishimura, and S. Kawai, Analysis of Package Cracking During Reflow Soldering Process, 26th International Reliability Physics Symposium, pp.90-95, 1988.

I. Fukuzawa, S. Ishiguro, and S. Nanbu, Moisture Resistance Degardation of Plastic LSIs by Reflow Soldering, IEEE, 23rd International Reliability Physics Symposium, pp.192-197, 1985.

K. Weide-zaage, W. Horaud, and H. Frémont, Moisture diffusion in Printed Circuit Boards: Measurements and Finite- Element- Simulations, Microelectronics Reliability, vol.45, issue.9-11, pp.1662-1667, 2005.
DOI : 10.1016/j.microrel.2005.07.077
URL : https://hal.archives-ouvertes.fr/hal-00183957

. G. Kh, S. Schmitt-thomas, H. Wege, and . Schweigart, Elektrochemische Migration -eine typische Korrosionserscheinung in der Mikroelektronik, Materials and Corrosion, vol.46, pp.366-369, 1995.

E. H. Wong, K. C. Chan, and R. Rajoo, The Mechanics and Impact of Hygroscopic Swelling of Polymeric Materials in Electronic Packaging, IEEE, Electronic Components and Technology Conference, pp.576-580, 2000.

E. H. Wong, Y. C. Teo, and T. B. Lim, Moisture Diffusion and Vapour Pressure Modeling of IC Packaging, Technology Conference (ECTC), pp.1372-1378, 1998.

W. Feng, Caractérisation Expérimentale et Simulation Physique des Mécanismes de dégradation de Interconnexions sans plomb dans les technologies d'assemblage a très forte densité d'intégration, Boitier sur Boitier Dissertation, 2010.

J. W. Yoon, B. Noh, and Y. Lee, Effects of isothermal aging and temperature???humidity treatment of substrate on joint reliability of Sn???3.0Ag???0.5Cu/OSP-finished Cu CSP solder joint, Microelectronics Reliability, vol.48, issue.11-12, pp.1864-1873, 2008.
DOI : 10.1016/j.microrel.2008.07.065

H. Huebner, S. Penka, and B. Barchmann, Microcontacts with sub-30 ?m pitch for 3D chipon-chip integration, Microelectronic Engineering, Microelectronic Engineering, vol.83, pp.11-12, 2006.

P. J. Boddys, R. H. Delaney, and J. N. Lahti, Accelarated Life Testing of Flexible Printing Circuits, 14th Reliability Physics Symposium, pp.108-117, 1976.

D. Q. Yu, W. Jillek, and E. Schmitt, Electrochemical migration of lead free solder joints, Journal of Materials Science: Materials in Electronics, vol.41, issue.3, pp.229-241, 2006.
DOI : 10.1007/s10854-006-6765-z

K. M. Striny and A. W. Schelling, Reliability Evaluation of Aluminum-Metallized MOS Dynamic RAM's in Plastic Packages in High Humidity and Temperature Environments, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.4, issue.4, pp.476-481, 1981.
DOI : 10.1109/TCHMT.1981.1135819

M. S. Jung, S. B. Lee, and H. Y. Lee, Improvement of Electrochemical Migration Resistance by Cu/Sn Inter-Metallic Compound Barrier on Cu in Printed Circuit Board, IEEE, Transactions on Device and Materials Reliability, vol.99, pp.1-8, 2012.

C. Xu, Y. Zhang, and C. Fan, Understanding Whisker Phenomenon ? Driving Force for the Whisker Formation, IPC, pp.1-6, 2006.

W. W. Lee, L. T. Nguyen, and G. S. Selvaduray, Solder joint fatigue models: review and applicability to chip scale packages, Microelectronics Reliability, vol.40, issue.2, pp.231-243, 2000.
DOI : 10.1016/S0026-2714(99)00061-X

S. S. Manson, Fatique: A Complex Subject ? Some Simple Approximations, Experimental Mechanics, pp.193-226, 1964.
DOI : 10.1007/bf02321056

S. B. Brown, K. H. Kim, and L. Anand, An internal variable constitutive model for hot working of metals, International Journal of Plasticity, vol.5, issue.2, pp.95-130, 1989.
DOI : 10.1016/0749-6419(89)90025-9

M. Pei and J. Qu, Constitutive modeling of lead-free solders, ASME: Adv. Electron. Package, pp.1307-1311, 2005.

Y. Liu, S. Irving, and T. Luk, 3D Modeling of electromigration combined with thermal???mechanical effect for IC device and package, Microelectronics Reliability, vol.48, issue.6, pp.811-823, 2008.
DOI : 10.1016/j.microrel.2008.03.021

Y. L. Huang and K. L. Lin, Microstructure evolution and microimpact performance of Sn???Ag???Cu solder joints under thermal cycle test, Journal of Materials Research, vol.25, issue.07, pp.1312-1320, 2010.
DOI : 10.1557/JMR.2010.0162

M. Meilunas, A. Primavera, and O. Steven, Reliability and Failure Analysis of Lead-Free Solder Joints, Proceedings of the IPC Annual Meeting, pp.1-15, 2003.

J. Y. Kim and J. Yu, Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering, Applied Physics Letters, vol.92, issue.9, pp.1-3, 2008.
DOI : 10.1063/1.2890072

L. Xu, J. H. Pang, and F. Che, Impact of Thermal Cycling on Sn-Ag-Cu Solder Joints and Board-Level Drop Reliability, Journal of Electronic Materials, vol.33, issue.6, pp.880-886, 2008.
DOI : 10.1007/s11664-008-0400-0

J. Y. Lee, T. K. Hwang, and J. Y. Kim, Study on the Board Level Reliability Test of Package on Package (PoP) with 2nd Level Underfill, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.1905-1910, 2007.
DOI : 10.1109/ECTC.2007.374059

R. Labie, P. Limaye, and K. W. Lee, Reliability testing of Cu-Sn intermetallic micro-bump interconnections for 3D-device stacking, 3rd Electronics System Integration Technology Conference ESTC, pp.1-5, 2010.
DOI : 10.1109/ESTC.2010.5642925

Y. B. Kim, H. Noguchi, and M. Amagai, Vibration fatigue reliability of BGA-IC package with Pb-free solder and Pb???Sn solder, Microelectronics Reliability, vol.46, issue.2-4, pp.459-466, 2006.
DOI : 10.1016/j.microrel.2005.02.003

S. F. Wong, P. Malatkar, and C. Rick, Vibration Testing and Analysis of Ball Grid Array Package Solder Joints, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.373-380, 2007.
DOI : 10.1109/ECTC.2007.373825

T. Pringle, P. Raghavan, and P. Malatkar, Solder Joint Reliability of BGA Package under End-User Handling Test Conditions, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.400-406, 2007.
DOI : 10.1109/ECTC.2007.373828

E. H. Wong, K. M. Lim, and N. Lee, Drop impact test - mechanics & physics of failure, 4th Electronics Packaging Technology Conference, 2002., pp.327-333, 2002.
DOI : 10.1109/EPTC.2002.1185692

T. C. Chai, S. Quek, and W. Y. Hnin, Board level drop test reliability of IC packages, Proceedings Electronic Components and Technology, 2005. ECTC '05., pp.630-636, 2005.
DOI : 10.1109/ECTC.2005.1441335

J. M. Song, B. R. Huang, and C. Y. Liu, Nanomechanical responses of intermetallic phase at the solder joint interface ??? Crystal orientation and metallurgical effects, Materials Science and Engineering: A, vol.534, pp.534-53, 2012.
DOI : 10.1016/j.msea.2011.11.037

J. M. Song, Y. L. Shen, and C. Su, Strain Rate Dependence on Nanoindentation Responses of Interfacial Intermetallic Compounds in Electronic Solder Joints with Cu and Ag Substrates, MATERIALS TRANSACTIONS, vol.50, issue.5, pp.1231-1234, 2009.
DOI : 10.2320/matertrans.M2009016

H. John, L. Pang, and B. S. Xiong, Modeling Stress Strain Curves For Lead-Free 95.5Sn- 3.8Ag-0.7Cu Solder, Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), pp.449-453, 2004.

C. C. Lee, P. J. Wang, and J. S. Kim, Are Intermetallics in Solder Joints Really Brittle?, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.648-652, 2007.
DOI : 10.1109/ECTC.2007.373866

S. K. Seah, C. T. Lim, and E. H. Wong, Mechanical response of PCBs in portable electronic products during drop impact, 4th Electronics Packaging Technology Conference, 2002., pp.120-125, 2002.
DOI : 10.1109/EPTC.2002.1185609

T. Mattila, Reliability of High Density Lead-Free Solder Interconnections Under Thermal Cycling and Mechanical Shock Loading, 2005.

X. Yanghua, L. Chuanyan, and X. Xiaoming, Effect of Interfacial Reactions on the Reliability of Lead-Free Assemblies after Board Level Drop Tests, Journal of Electronic Materials, vol.36, issue.9, pp.1129-1136, 2007.

D. Y. Chong, F. X. Che, and J. H. Pang, Drop impact reliability testing for lead-free and lead-based soldered IC packages, Microelectronics Reliability, vol.46, issue.7, pp.1160-1171, 2006.
DOI : 10.1016/j.microrel.2005.10.011

H. Wever, Elektro und Thermotransport in Metallen, pp.56-232, 1973.

C. Chen, H. M. Tong, and K. N. Tu, Electromigration and Thermomigration in Pb-Free Flip-Chip Solder Joints, Annual Review of Materials Research, vol.40, issue.1, pp.531-555, 2010.
DOI : 10.1146/annurev.matsci.38.060407.130253

I. A. Blech, Electromigration in thin aluminum films on titanium nitride, Journal of Applied Physics, vol.47, issue.4, pp.1203-1208, 1976.
DOI : 10.1063/1.322842

Y. Hou and C. M. Tan, Blech Effect in Cu Interconnects with Oxide and Low-k Dielectrics, 2007 14th International Symposium on the Physical and Failure Analysis of Integrated Circuits, pp.65-69, 2007.
DOI : 10.1109/IPFA.2007.4378059

V. M. Dwyer, Analysis of critical-length data from Electromigration failure studies, Microelectronics Reliability, vol.51, issue.9-11, pp.1568-1572, 2011.
DOI : 10.1016/j.microrel.2011.06.036

L. Meinshausen, K. Weide-zaage, and H. Frémont, Electro- and thermo-migration induced failure mechanisms in Package on Package, Microelectronics Reliability, vol.52, issue.12, pp.2889-2906, 2012.
DOI : 10.1016/j.microrel.2012.06.115

J. Jep154, Guideline for Characterizing Solder Bump Electromigration under Constant Current and Temperature Stress, 2008.

J. R. Black, Electromigration of Al-Si Alloy Films, 16th International Reliability Physics Symposium, pp.233-236, 1978.
DOI : 10.1109/IRPS.1978.362852

C. Hau-riege, R. Zang, and Y. W. Yau, Electromigration studies of lead-free solder balls used for wafer-level packaging, 2011 IEEE 61st Electronic Components and Technology Conference (ECTC), pp.717-721, 2011.
DOI : 10.1109/ECTC.2011.5898592

K. Nakagawa, S. Baba, and M. Watanabe, Thermo-electromigration phenomenon of solder bump, leading to flip-chip devices with 5,000 bumps, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220), pp.1-7, 2001.
DOI : 10.1109/ECTC.2001.927925

K. Weide-zaage, H. Frémont, and L. Wang, Simulation of migration effects in PoP, EuroSimE 2008, International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, pp.1-7, 2008.
DOI : 10.1109/ESIME.2008.4525074
URL : https://hal.archives-ouvertes.fr/hal-00323415

K. Weide-zaage, Simulation of Migration Effects in Solder Bumps, IEEE Transactions on Device and Materials Reliability, vol.8, issue.3, pp.442-448, 2008.
DOI : 10.1109/TDMR.2008.2002342

L. Meinshausen, K. Weide-zaage, and M. Petzold, Electro-and thermomigration in microbump interconnects for 3D integration, Technology Conference (ECTC), pp.1444-1451, 2011.

L. Meinshausen, K. Weide-zaage, and H. Frémont, Migration induced material transport in Cu- Sn IMC and SnAgCu micro bumps, IEEE, Microelectronics Reliability, vol.51, pp.9-11, 2011.

B. H. Chao, X. Zhang, S. H. Chae, and P. S. Ho, Recent advances on kinetic analysis of electromigration enhanced intermetallic growth and damage formation in Pb-free solder joints, Microelectronics Reliability, vol.49, issue.3, pp.253-263, 2009.
DOI : 10.1016/j.microrel.2009.01.006

B. Chao, S. H. Chae, and X. Zhang, Electromigration enhanced intermetallic growth and void formation in Pb-free solder joints, Journal of Applied Physics, vol.100, issue.8, pp.1-10, 2006.
DOI : 10.1063/1.2359135

S. H. Chae, B. Chao, and X. Zhang, Investigation of Intermetallic Compound Growth Enhanced by Electromigration in Pb-Free Solder Joints, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.1442-1449, 2007.
DOI : 10.1109/ECTC.2007.373985

A. Syeed, K. Dhandapani, and R. Moody, Cu Pillar and μ-bump electromigration reliability and comparison with high pb, SnPb, and SnAg bumps, 2011 IEEE 61st Electronic Components and Technology Conference (ECTC), pp.332-339, 2011.
DOI : 10.1109/ECTC.2011.5898534

F. Y. Ouyang, H. Hsu, and Y. P. Su, Electromigration induced failure on lead-free micro bumps in three-dimensional integrated circuits packaging, Journal of Applied Physics, vol.112, issue.2, pp.1-5, 2012.
DOI : 10.1063/1.4737154

W. D. Macdonald and T. W. Eagar, Transient Liquid Phase Bonding, Annual Review of Materials Science, vol.22, issue.1, pp.23-46, 1992.
DOI : 10.1146/annurev.ms.22.080192.000323

D. Q. Yu and L. Wang, The growth and roughness evolution of intermetallic compounds of Sn???Ag???Cu/Cu interface during soldering reaction, Journal of Alloys and Compounds, vol.458, issue.1-2, pp.542-547, 2008.
DOI : 10.1016/j.jallcom.2007.04.047

C. H. Ma and R. Swalin, A study of solute diffusion in liquid tin, Acta Metallurgica, vol.8, issue.6, pp.388-395, 1960.
DOI : 10.1016/0001-6160(60)90008-0

K. N. Tu and T. Y. Lee, Wetting reaction versus solid state aging of eutectic SnPb on Cu, Journal of Applied Physics, vol.89, issue.9, pp.4843-4849, 2001.
DOI : 10.1063/1.1357469

K. N. Tu and K. Zeng, Tin???lead (SnPb) solder reaction in flip chip technology, Materials Science and Engineering: R: Reports, vol.34, issue.1, pp.1-58, 2001.
DOI : 10.1016/S0927-796X(01)00029-8

N. S. Bosco and F. W. Zok, Critical interlayer thickness for transient liquid phase bonding in the Cu???Sn system, Acta Materialia, vol.52, issue.10, pp.2965-2972, 2004.
DOI : 10.1016/j.actamat.2004.02.043

B. E. Deal and A. S. Grove, General Relationship for the Thermal Oxidation of Silicon, Journal of Applied Physics, vol.36, issue.12, pp.3770-3778, 1965.
DOI : 10.1063/1.1713945

L. Meinshausen, H. Frémont, and K. Weide-zaage, Electro- and thermomigration-induced IMC formation in SnAg3.0Cu0.5 solder joints on nickel gold pads, Microelectronics Reliability, vol.53, issue.9-11, pp.1575-1580, 2013.
DOI : 10.1016/j.microrel.2013.07.038
URL : https://hal.archives-ouvertes.fr/hal-00905898

A. Paul, C. Ghosh, and W. J. Boettinger, Diffusion Parameters and Growth Mechanism of Phases in the Cu-Sn System, Metallurgical and Materials Transactions A, vol.45, issue.2, pp.952-963, 2011.
DOI : 10.1007/s11661-010-0592-9

K. N. Tu and R. D. Thompson, Kinetics of interfacial reaction in bimetallic Cu???Sn thin films, Acta Metallurgica, vol.30, issue.5, pp.947-952, 1982.
DOI : 10.1016/0001-6160(82)90201-2

P. T. Vianco and D. R. Frear, Issues in the replacement of lead-bearing solders, JOM, vol.7, issue.7, pp.14-19, 1993.
DOI : 10.1007/BF03222374

F. Gao and J. Qu, Calculating the diffusivity of Cu and Sn in Cu3Sn intermetallic by molecular dynamics simulations, Materials Letters, vol.73, pp.92-93, 2012.
DOI : 10.1016/j.matlet.2012.01.014

H. Gan, H. , and K. N. Tu, Polarity effect of electromigration on kinetics of intermetallic compound formation in Pb-free solder V-groove samples, Journal of Applied Physics, vol.97, issue.6, pp.1-10, 2005.
DOI : 10.1063/1.1861151

S. Ou and K. N. Tu, A Study of Electromigration in Sn3.5AG and Sn3.8Ag0.7Cu Solder Lines, 55th Electronic Components and Technology Conference (ECTC), pp.1445-1450, 2005.

B. Pieraggi, R. A. Rapp, and F. J. Van-loo, Interfacial dynamics in diffusion-driven phase transformations, Acta Metallurgica et Materialia, vol.38, issue.9, pp.1781-1788, 1990.
DOI : 10.1016/0956-7151(90)90020-H

K. N. Tu, Solder Joint Technology Material Properties Reliability, pp.113-257, 0198.

T. Y. Lee, W. J. Choi, and K. N. Tu, Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn???3.5Ag, Sn???3.8Ag???0.7Cu and Sn???0.7Cu) on Cu, Journal of Materials Research, vol.77, issue.02, pp.291-301, 2002.
DOI : 10.1007/s11661-000-0111-5

T. A. Siewert, J. C. Madeni, and S. Liu, Formation and Growth of Intermetallics at the Interface Between Lead-free Solders and Copper Substrates, NIST, 2003.

Y. D. Jeon, K. W. Paik, and A. Ostmann, Effects of Cu contents in Pb-free solder alloys on interfacial reactions and bump reliability of Pb-free solder bumps on electroless Ni-P under-bump metallurgy, Journal of Electronic Materials, vol.44, issue.1, pp.80-90, 2005.
DOI : 10.1007/s11664-005-0183-5

A. Kumar, M. He, and Z. Chen, Effect of electromigration on interfacial reactions between electroless Ni-P and Sn???3.5% Ag solder, Thin Solid Films, vol.462, issue.463, pp.462-463, 2004.
DOI : 10.1016/j.tsf.2004.05.042

F. Y. Ouyang and W. C. Jhu, Comparison of thermomigration behaviors between Pb-free flip chip solder joints and microbumps in three dimensional integrated circuits: Bump height effect, Journal of Applied Physics, vol.113, issue.4, pp.1-8, 2013.
DOI : 10.1063/1.4789025

M. L. Huang, S. Ye, and N. Zhao, Current-induced interfacial reactions in Ni/Sn???3Ag???0.5Cu/Au/Pd(P)/Ni???P flip chip interconnect, Journal of Materials Research, vol.26, issue.24, pp.3009-3019, 2011.
DOI : 10.1063/1.2717564

C. Chen and S. Chen, Electromigration effect upon the Sn/Ag and Sn/Ni interfacial reactions at various temperatures, Acta Materialia, vol.50, issue.9, pp.2461-2469, 2002.
DOI : 10.1016/S1359-6454(02)00076-9

C. B. Lee, J. W. Yoon, and S. J. Suh, Intermetallic compound layer formation between Sn- 3.5mass% Ag BGA solder ball and (Cu, immersion Au/Electroless Ni-P/Cu) substrate, Journal of Materials Science: Materials in Electronics, vol.14, issue.8, pp.487-493, 2003.
DOI : 10.1023/A:1023968800400

C. Gosh, Study on important diffusion parameters of binary Ni3Sn4 phase, Journal of Materials Science: Materials in Electronics, vol.57, issue.7, pp.2558-2561, 2013.
DOI : 10.1007/s10854-013-1133-2

H. D. Blair, T. Y. Pan, J. M. Nicholson-au, /. Ni, and P. , Intermetallic compound growth on Ni, Ni substrates with Sn/Pb, Sn/Ag, and Sn solders [PWBs] Technology Conference (ECTC), pp.259-267, 1998.

M. He, A. Kumar, and P. T. Yeo, Interfacial reaction between Sn-rich solders and Ni-based metallization, Thin Solid Films, vol.462, issue.463, pp.462-463, 2004.
DOI : 10.1016/j.tsf.2004.05.062

M. He, Z. Chen, and G. Qi, Solid state interfacial reaction of Sn???37Pb and Sn???3.5Ag solders with Ni???P under bump metallization, Acta Materialia, vol.52, issue.7, pp.2047-2056, 2004.
DOI : 10.1016/j.actamat.2003.12.042

P. G. Shewmon, Diffusion in Solids, pp.54-74, 1989.
DOI : 10.1007/978-3-319-48206-4

H. Barth and L. , Elektro und Thermotransport in Metallen, pp.52-56, 1973.

B. F. Dyson, T. Anthony, and D. Turnbull, Interstitial Diffusion of Copper and Silver in Lead, Journal of Applied Physics, vol.37, issue.6, pp.2370-2373, 1966.
DOI : 10.1063/1.1708820

J. R. Lloyd, K. Tu, and J. , Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, pp.834-836, 2004.

B. F. Dyson, Diffusion of Gold and Silver in Tin Single Crystals, Journal of Applied Physics, vol.37, issue.6, pp.2375-2377, 1966.
DOI : 10.1063/1.1708821

B. F. Dyson, T. Anthony, and D. Turnbull, Interstitial Diffusion of Copper in Tin, Journal of Applied Physics, vol.38, issue.8, pp.3408-3409, 1967.
DOI : 10.1063/1.1710127

D. C. Yeh and H. B. Huntington, Extreme Fast-Diffusion System: Nickel in Single-Crystal Tin, Physical Review Letters, vol.53, issue.15, pp.1469-1472, 1984.
DOI : 10.1103/PhysRevLett.53.1469

P. J. Shang, Z. Q. Liu, and X. Y. Pang, Growth mechanisms of Cu3Sn on polycrystalline and single crystalline Cu substrates, Acta Materialia, vol.57, issue.16, pp.4697-4706, 2009.
DOI : 10.1016/j.actamat.2009.06.025

K. Pearson, The Problem of the Random Walk, Nature, vol.72, issue.1875, p.293, 1905.

A. Einstein, Über die von der molekularkinetischen Theorie der Wärme geforderte Bewegung von in ruhenden Flüssigkeiten suspendierten Teilchen, Annalen der Physik, vol.17, pp.549-560, 1905.

J. O. Suh, K. N. Tu, and N. Tamura, A Synchrotron Radiation X-Ray Microdiffraction Study on Orientation Relationships between a Cu 6 Sn 5 and Cu Substrate in Solder Joints, JOM, pp.63-66, 2006.

Y. Watanabe, Y. Funjinaga, and H. Iwasaki, Sn, Acta Crystallographica Section B Structural Science, vol.39, issue.3, pp.306-311, 1983.
DOI : 10.1107/S0108768183002451
URL : https://hal.archives-ouvertes.fr/in2p3-01175489

X. Y. Pang, S. Q. Wang, and L. Zhang, First principles calculation of elastic and lattice constants of orthorhombic Cu3Sn crystal, Journal of Alloys and Compounds, vol.466, issue.1-2, pp.517-520, 2008.
DOI : 10.1016/j.jallcom.2007.11.095

E. W. Elcock and C. W. Mccombie, Vacancy Diffusion in Binary Ordered Alloys, Physical Review, vol.109, issue.2, pp.605-606, 1958.
DOI : 10.1103/PhysRev.109.605

F. Gao and J. Qu, Calculating the diffusivity of Cu and Sn in Cu3Sn intermetallic by molecular dynamics simulations, Materials Letters, vol.73, pp.92-93, 2012.
DOI : 10.1016/j.matlet.2012.01.014

J. H. Van-'t and . Hoff, Etudes de Dynamique Chimique, p.116

K. N. Tu, H. Hsiao, and C. Chen, Transition from flip chip solder joint to 3D IC microbump: Its effect on microstructure anisotropy, Microelectronics Reliability, vol.53, issue.1, pp.2-6, 2013.
DOI : 10.1016/j.microrel.2012.07.029

H. B. Huntington and A. R. Crone, Current-induced marker motion in gold wires, Journal of Physics and Chemistry of Solids, vol.20, issue.1-2, pp.76-87, 1961.
DOI : 10.1016/0022-3697(61)90138-X

H. M. Gilder and D. Lazarus, in Gold, Physical Review, vol.145, issue.2, pp.507-518, 1966.
DOI : 10.1103/PhysRev.145.507

I. A. Blech, Electromigration in thin aluminum films on titanium nitride, Journal of Applied Physics, vol.47, issue.4, pp.1203-1208, 1976.
DOI : 10.1063/1.322842

C. Bosvieux and J. , Sur l'electrolyse des alliages metalliques, Journal of Physics and Chemistry of Solids, vol.23, issue.1-2, pp.123-136, 1962.
DOI : 10.1016/0022-3697(62)90066-5

K. Weide-zaage, Simulation von Ausfallmechanismen auf Package-und Chiplevel, 2010.

G. Brebec, N. Von-doan, and M. , Relation entre chaleur de transport et valence efficace, Scripta Metallurgica, vol.2, issue.6, pp.323-326, 1968.
DOI : 10.1016/0036-9748(68)90131-2

R. A. Johns and D. A. Blackburn, Grain boundaries and their effect on thermonigration in pure lead at low diffusion temperatures, Thin Solid Films, vol.25, issue.2, pp.291-300, 1975.
DOI : 10.1016/0040-6090(75)90049-8

H. Yu, V. Vuorinen, and J. Kivilahti, Effect of Ni on the Formation of Cu 6 Sn 5 and Cu 3 Sn Intermetallics, Technology Conference (ECTC), pp.1204-1209, 2006.

J. Tao, J. F. Chen, and N. W. Cheung, Modeling and Characterization of Electromigration Failures Under Bidirectional Current Stress, IEEE, Transactions on Electron Devices, vol.43, issue.5, pp.800-808, 1996.

R. J. Fields and S. R. Low, Physical And Mechanical Properties Of Intermetallic Compounds Commonly Found in Solder Joints, The National Institute of Standards and Technology (NIST), 1991.

W. C. Kuan, S. W. Liang, and C. Chen, Effect of bump size on current density and temperature distributions in flip-chip solder joints, Microelectronics Reliability, vol.49, issue.5, pp.544-550, 2009.
DOI : 10.1016/j.microrel.2009.03.001

N. Saud and A. Jalar, Sn-Rich Phase Coarsening in Sn-Ag-Cu Solder Joint during Moderate Current Stressing, Advanced Materials Research, vol.264, issue.265, pp.264-265, 2011.
DOI : 10.4028/www.scientific.net/AMR.264-265.212

L. Meinshausen, H. Frémont, and K. Weide-zaage, Electro-and Thermomigration-induced IMC Formation in SnAg 3.0 Cu 0.5 Solder Joints on Nickel Gold Pads, 14th Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), pp.15-17, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00905898

Y. Lai, K. Chen, and C. Kao, Electromigration of Sn???37Pb and Sn???3Ag???1.5Cu/Sn???3Ag???0.5Cu composite flip???chip solder bumps with Ti/Ni(V)/Cu under bump metallurgy, Microelectronics Reliability, vol.47, issue.8, pp.1273-1279, 2007.
DOI : 10.1016/j.microrel.2006.09.023

R. C. Weast and E. , 62 Edition -CRC Handbook of Chemistry and Physics, 1981.

R. Parkinson, Properties and applications of electroless nickel (10081), Nickel Development Institute, vol.37, p.6, 1997.

N. Miura, Y. Fuura, and A. Kazami, Electroless Nickel Resistors Formed on IMST Substrate, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.4, issue.4, pp.532-535, 1981.
DOI : 10.1109/TCHMT.1981.1135848

P. Tsotra and K. Friedrich, Thermal, mechanical, and electrical properties of epoxy resin/polyaniline-dodecylbenzenesulfonic acid blends, Synthetic Metals, vol.143, issue.2, pp.237-242, 2004.
DOI : 10.1016/j.synthmet.2003.12.016

H. Ye, C. Basaran, and D. C. Hopkins, Mechanical degradation of microelectronics solder joints under current stressing, International Journal of Solids and Structures, vol.40, issue.26, pp.7269-7283, 2003.
DOI : 10.1016/j.ijsolstr.2003.08.019

W. Feng, H. Frémont, A. Guédon-gracia, and F. Verdier, Analytical Model for Thermallyinduced Warpage of PoP, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00323410

K. Weide-zaage, Simulation of Migration Effects in Solder Bumps, IEEE Transactions on Device and Materials Reliability, vol.8, issue.3, pp.442-448, 2008.
DOI : 10.1109/TDMR.2008.2002342

K. Weide-zaage, Exemplified calculation of stress migration in a 90nm node via structure, 2010 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), 2010.
DOI : 10.1109/ESIME.2010.5464542

H. Yu, V. Vuorinen, and J. Kivilahti, Effect of Ni on the Formation of Cu 6 Sn 5 and Cu 3 Sn Intermetallics, Technology Conference (ECTC), pp.1204-1209, 2006.

F. Gao and J. Qu, Calculating the diffusivity of Cu and Sn in Cu3Sn intermetallic by molecular dynamics simulations, Materials Letters, vol.73, pp.92-93, 2012.
DOI : 10.1016/j.matlet.2012.01.014

H. Wever, Elektro und Thermotransport in Metallen, p.56, 1973.

K. Guth, D. Siepe, and J. Görlich, New assembly and interconnects beyond sintering methods, Power Conversion and Inteligent Motion (PCIM), pp.1-6, 2010.

E. W. Elcock and C. W. Mccombie, Vacancy Diffusion in Binary Ordered Alloys, Physical Review, vol.109, issue.2, pp.605-606, 1958.
DOI : 10.1103/PhysRev.109.605

B. F. Dyson, T. Anthony, and D. Turnbull, Interstitial Diffusion of Copper in Tin, Journal of Applied Physics, vol.38, issue.8, pp.3408-3409, 1967.
DOI : 10.1063/1.1710127

B. F. Dyson, Diffusion of Gold and Silver in Tin Single Crystals, Journal of Applied Physics, vol.37, issue.6, pp.2375-2377, 1966.
DOI : 10.1063/1.1708821

L. Meinshausen, H. Frémont, and K. Weide-zaage, Influence of contact geometry variations on the life time distribution of IC packages during electromigration testing, IEEE, 14th Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), pp.15-17, 2013.

L. Meinshausen, H. Frémont, and K. Weide-zaage, Migration induced IMC formation in SAC305 solder joints on Cu, NiAu and NiP metal layers, Microelectronics Reliability, vol.52, issue.9-10, pp.1827-1832, 2012.
DOI : 10.1016/j.microrel.2012.06.127
URL : https://hal.archives-ouvertes.fr/hal-00745990

B. F. Dyson, T. Anthony, and D. Turnbull, Interstitial Diffusion of Copper in Tin, Journal of Applied Physics, vol.38, issue.8, pp.3408-3409, 1967.
DOI : 10.1063/1.1710127

B. F. Dyson, Diffusion of Gold and Silver in Tin Single Crystals, Journal of Applied Physics, vol.37, issue.6, pp.2375-2377, 1966.
DOI : 10.1063/1.1708821

. Internship and . Department, Global Foundries, Dresden Improvement of an existing fast waver level electromigration test (inline measurements), to enable the reproduction of package level tests, 2004.

A. Moujbani, J. Kludt, K. Weide-zaage, M. Ackermann, V. Hein et al., Dynamic simulation of migration induced failure mechanism in integrated circuit interconnects, Microelectronics Reliability, vol.53, issue.9-11, pp.1365-1369, 2013.
DOI : 10.1016/j.microrel.2013.07.097

L. Meinshausen, H. Frémont, and K. Weide-zaage, Influence of contact geometry variations on the life time distribution of IC packages during electromigration testing, IEEE, 14th Mechanical & Multi- Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), pp.15-17, 2013.

L. Meinshausen, H. Frémont, and K. Weide-zaage, Migration induced IMC formation in SAC305 solder joints on Cu, NiAu and NiP metal layers, Microelectronics Reliability, vol.52, issue.9-10, pp.1827-1832, 2012.
DOI : 10.1016/j.microrel.2012.06.127
URL : https://hal.archives-ouvertes.fr/hal-00745990

K. Weide-zaage, L. Meinshausen, and H. Fremont, Prediction of Electromigration Induced Void Formation in TSV and SAC Contacts, IEEE Congress on Engineering and Technology (CET) IEEE Cat, pp.978-979, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00716397

I. Bauer, K. Weide-zaage, and L. Meinshausen, Influence of air gaps on the thermal???electrical???mechanical behavior of a copper metallization, Microelectronics Reliability, vol.51, issue.9-11, pp.9-11, 2011.
DOI : 10.1016/j.microrel.2011.07.011

L. Meinshausen, K. Weide-zaage, and H. Frémont, Migration induced material transport in Cu-Sn IMC and SnAgCu micro bumps, IEEE, Microelectronics Reliability, vol.51, pp.9-11, 2011.
DOI : 10.1016/j.microrel.2011.06.032

L. Meinshausen, K. Weide-zaage, and M. Petzold, Electro-and thermomigration in microbump interconnects for 3D integration, Technology Conference (ECTC), pp.1444-1451, 2011.

L. Meinshausen and K. Weide-zaage, Exploration of Migration and Stress Effects in PoPs Considering Inhomogeneous Temperature Distribution, International Wafer-Level Packaging Conference (IWLPC), pp.137-145, 2010.

K. Weide-zaage, L. Meinshausen, H. Frémont, and S. Orlando, Characterisation of thermal-electrical and mechanical behaviour of PoP, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00617940

L. Meinshausen, K. Weide-zaage, and H. Frémont, Underfill and mold compound influence on PoP aging under high current and high temperature stress, 3rd Electronics System Integration Technology Conference ESTC, 2010.
DOI : 10.1109/ESTC.2010.5642803

L. Meinshausen, K. Weide-zaage, H. Frémont, and W. Feng, PoP prototyping by determination of matter transport effects, 2010 IEEE CPMT Symposium Japan, pp.1-4, 2010.
DOI : 10.1109/CPMTSYMPJ.2010.5679664
URL : https://hal.archives-ouvertes.fr/hal-00499415

L. Meinshausen, K. Weide-zaage, and H. Frémont, Underfill and mold compound influence on PoP ageing under high current and high temperature stresses, Electronic System-Integration Technology Conference (ESTC), pp.1-6, 20103.
URL : https://hal.archives-ouvertes.fr/hal-00716406

L. Meinshausen, K. Weide-zaage, H. Frémont, and W. Feng, Virtual prototyping of PoP interconnections regarding electrically activated mechanisms, 2010 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), pp.1-8, 2010.
DOI : 10.1109/ESIME.2010.5464618
URL : https://hal.archives-ouvertes.fr/hal-00477596

K. Weide-zaage, J. Kludt, L. Meinshausen, and A. Farajzadeh, Synergiepotenzial von finite Elemente Simulationen bei der Optimierung des Entwurfsprozesses von Metallisierungen, GMM CfP TuZ, 2013.

L. Meinshausen, H. Frémont, and K. Weide-zaage, Preparation of reliability experiments for three dimensional packaging, Smart Failure Analysis for New Materials in Electronic Devices (smart-FA), 2012.
URL : https://hal.archives-ouvertes.fr/hal-00905900

L. Meinshausen and H. Frémont, Influence of the fabrication process and the preparation on electromigration induced IMC formation in PoP, analyse de défaillance de composants électroniques (anadef), 2012.

K. Weide-zaage, L. Meinshausen, and J. Kludt, Simulation von Phasenbildung in Metallisierungen und Bumps, VDE-ITG Fachgruppe 8.5.6 fWLR/ Wafer Level Reliability, Zuverlässigkeits-Simulation & Qualifikation, 2012.

L. Meinshausen, O. Aubel, and H. Schmidt, Ermittlung optimierter Ausfallkriterien für den Vergleich zwischen PL-EM und Isothermal Tests, VDE ITG fWLR Workshop, 2009.