C. Acier, 115 - II.5.2.2. Simulation de la durée de vie, II.5.2.1. Identification des paramètres du modèle, p.118

.. Étude-du-comportement-de-l-'éprouvette-soudée-ms4-sous-un-chargement-À-amplitude-constante, -120 - III.4.1. Définition d'un critère d'arrêt à l'amorçage, p.120

R. La-chaîne-de-calcul, -120 - III.8.6, III.8.5. Intégration à, p.120

A. Banvillet, T. Palin-luc, and S. Lasserre, A volumetric energy based high cycle multiaxial fatigue citerion, International Journal of Fatigue, vol.25, issue.8, 2003.
DOI : 10.1016/S0142-1123(03)00048-3
URL : https://hal.archives-ouvertes.fr/hal-01372060

W. Bastien, Fatigue multiaxiale des structures industrielles sous chargement quelconque, 1999.

. Bernasconi and I. V. Papadopoulos, Efficiency of algorithms for shear stress amplitude calculation in critical plane class fatigue criteria, Computational Materials Science, vol.34, issue.4, 2005.
DOI : 10.1016/j.commatsci.2005.01.005

A. Bignonnet, Tenue à la fatigue d'un acier 35NCD16 grenaillé. Évolution des contraintes résiduelles de grenaillage en fonction du type de sollicitation, pp.75-84, 1987.

T. Billaudeau, Fatigue multiaxiale des matériaux à défaut: mécanismes et critère d'endurance, 2002.

T. Billaudeau, Y. Nadot, and G. Bezine, Multiaxial fatigue limit for defective materials: mechanisms and experiments, Acta Materialia, vol.52, issue.13, pp.52-3911, 2004.
DOI : 10.1016/j.actamat.2004.05.006

J. J. Bonnen, F. Conle, and T. H. Topper, The role of in-phase and out-of-phase overloads on the torsional fatigue of normalized SAE-1045 steel, International Journal of Fatigue, vol.23, issue.01, pp.385-394, 2001.
DOI : 10.1016/S0142-1123(01)00135-9

C. Bouhelier and J. Lu, Mesures de contraintes résiduelles dans les soudures. Méthodes disponibles, exemples d'applications, Les contraintes résiduelles dans les constructions soudées, pp.23-43, 1987.

J. Bréat, Formation Soudure Renault, 2010.

M. Brown and K. Miller, Initiation and growth of cracks in biaxial fatigue. Fatigue & Fracture of Engineering ?. Retrieved from http, 1979.

A. Callens and A. Bignonnet, Fatigue design of welded bicycle frames using a multiaxial criterion, Procedia Engineering, vol.34, pp.640-645, 2012.
DOI : 10.1016/j.proeng.2012.04.109

A. Carpinteri and A. Spagnoli, Multiaxial high-cycle fatigue criterion for hard metals, International Journal of Fatigue, vol.23, issue.2, 2001.
DOI : 10.1016/S0142-1123(00)00075-X

J. Chaboche, Une loi différentielle d'endommagement de fatigue avec cumulation non linéaire. Revue Française de Mécanique. Retrieved from http, 1974.

J. Chaboche, Continuous damage mechanics ??? A tool to describe phenomena before crack initiation, Nuclear Engineering and Design, vol.64, issue.2, 1981.
DOI : 10.1016/0029-5493(81)90007-8

J. Chaboche, L'approche Onera pour le cumul des dommages en fatigue sous chargements complexes et température variable, 2012.

J. Chaboche, P. Kanouté, and M. Kaminski, Extension and application of a nonlinear fatigue damage accumulation rule for variable amplitude loading programs, 2nd International Conference on Material and Component Performance under Variable Amplitude Loading, 2009.

B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel, Proc. Int. Conf. on Fatigue of Metals, Institution of ?. Retrieved from http, 1956.

G. Crupi, V. Crupi, E. Guglielmino, and D. Taylor, Fatigue assessment of welded joints using critical distance and other methods, Engineering Failure Analysis, vol.12, issue.1, pp.129-142, 2005.
DOI : 10.1016/j.engfailanal.2004.03.005

D. Van and K. , Sur la résistance à la fatigue des métaux Sciences et Technique de l'Armement, pp.641-722, 1973.

D. Van, K. Bignonnet, A. Fayard, and J. , Assessment of welded structures by a structural multiaxial fatigue approach, pp.31-34, 2003.
DOI : 10.1016/S1566-1369(03)80002-X

D. Van, K. Griveau, B. , and &. O. Message, On a new multiaxial fatigue limit criterion: theory and applications, Biaxial and Multiaxial Fatigue, vol.311, pp.479-496, 1989.

D. Technique and E. , Problèmes et défauts de soudage ? causes et remèdes

E. May and M. , Étude de la tenue en fatigue d'un acier inoxydable pour l'aéronautique en milieu marin corrosif. Arts et Métiers ParisTech, 2013.

F. Ellyin and Z. Xia, A General Fatigue Theory and Its Application to Out-of-Phase Cyclic Loading, Journal of Engineering Materials and Technology, vol.115, issue.4, 1993.
DOI : 10.1115/1.2904239

. Fatemi and L. Yang, Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials, International Journal of Fatigue, vol.20, issue.1, pp.9-34, 1998.
DOI : 10.1016/S0142-1123(97)00081-9

J. Fayard, A. Bignonnet, and K. Dang-van, FATIGUE DESIGN CRITERION FOR WELDED STRUCTURES, Fatigue & Fracture of Engineering Materials and Structures, vol.31, issue.4, 1996.
DOI : 10.1111/j.1460-2695.1996.tb01317.x
URL : https://hal.archives-ouvertes.fr/hal-00111564

W. Findley, A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending, ASME J Eng Ind, pp.301-306, 1958.

M. Fine and R. Ritchie, Fatigue-crack initiation and near-threshold crack growth. Fatigue and Microstructure, 1979.

L. Flaceliere, Contribuition à la modelisation du dommage en fatigue multiaxiale d'un acier C36, 2004.

L. Flaceliere, F. Morel, and A. Dragon, Competition between mesoplasticity and damage under HCF ??? Elasticity/damage shakedown concept, International Journal of Fatigue, vol.29, issue.12, 2007.
DOI : 10.1016/j.ijfatigue.2006.11.001
URL : https://hal.archives-ouvertes.fr/hal-00809339

L. Flaceliere, F. Morel, and A. Dragon, Coupling Between Mesoplasticity and Damage in High-cycle Fatigue, International Journal of Damage Mechanics, vol.16, issue.4, 2007.
DOI : 10.1177/1056789506067935
URL : https://hal.archives-ouvertes.fr/hal-00571160

P. Forsyth, The application of " fractography " to fatigue failure investigations, Roy Aircraft Est, 1957.

W. Fricke, IIW guideline for the assessment of weld root fatigue Welding in the World Retrieved from http, 2013.

C. Froustey and S. Lasserre, Multiaxial fatigue endurance of 30NCD16 steel, International Journal of Fatigue, vol.11, issue.3, 1989.
DOI : 10.1016/0142-1123(89)90436-2

E. Goodin, A. Kallmeyer, and P. Kurath, Evaluation of nonlinear cumulative damage models for assessing HCF/LCF interactions in multiaxial loadings. ? Engine High Cycle Fatigue (HCF) ?, 1?14. Retrieved from http, 2004.

V. Gros, Etude de l'amorçage et de la propagation des fissures de fatigue dans les essieux-axes ferroviaires. Retrieved from http, 1996.

G. Halford and S. Manson, Reexamination of cumulative fatigue damage laws, 1985.

C. Harding and G. Hugo, Review of Literature on Probability of Detection for Liquid Penetrant Nondestructive Testing. Retrieved from http, 2011.

C. Hua and D. Socie, Fatigue damage in 1045 steel under constant amplitude biaxial loading. Fatigue & Fracture of Engineering ?. Retrieved from http, RECOMMANDATIONS POUR LA CONCEPTION EN FATIGUE DES ASSEMBLAGES ET DES COMPOSANTS SOUDES, 1984.

. Institut-de-soudure, . La, . Des, and . Soudes, Formation, 2009.

A. Karolczuk and E. Macha, A Review of Critical Plane Orientations in Multiaxial Fatigue Failure Criteria of Metallic Materials, International Journal of Fracture, vol.66, issue.3-4, pp.10704-10709, 2005.
DOI : 10.1007/s10704-005-1088-2

M. Kassner and J. Krebs, Influence of Welding Residual Stresses and Notch Effect on Fatigue Data for Welded Joints and Components. International Institute of Welding, pp.2171-1255, 2007.

D. Kujawski and F. Ellyin, On the concept of cumulative fatigue damage, International Journal of Fracture, vol.278, pp.263-278, 1988.

F. Lawrence, R. Mattos, Y. Higashida, and J. Burk, Estimating the fatigue crack initiation life of welds. ASTM STP. Retrieved from http://books.google.com/books?, pp.134-135, 1978.

J. Lemaitre and J. Chaboche, Mecanique des materiaux solides. (Dunod, p.544, 1988.

G. Leopold, Y. Nadot, S. Kalluri, R. M. Mcgaw, . Neimitz et al., Fatigue from an Induced Defect: Experiments and Application of Different Multiaxial Fatigue Approaches, Journal of ASTM International, vol.7, issue.4, 2010.

B. Li, J. Santos, and M. Freitas, A computerized procedure for longlife fatigue assessment under complex multiaxial loading. Fatigue & Fracture of Engineering ?. Retrieved from http, 2001.

E. Longaygue and F. Daly, Recommandations générales pour la conception, le dimensionnement et la réalisation des structures métalliques en site aquatique, 1994.

S. J. Maddox, Fatigue Strength of Welded Structures. Abington Pub. Retrieved from http, 1991.

E. Mamiya, J. Araújo, and F. Castro, Prismatic hull: A new measure of shear stress amplitude in multiaxial high cycle fatigue, International Journal of Fatigue, vol.31, issue.7, 2009.
DOI : 10.1016/j.ijfatigue.2008.12.010

S. Manson and G. Halford, Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage, International Journal of Fracture, vol.1, issue.2, pp.169-192, 1981.
DOI : 10.1007/BF00053519

S. S. Manson and G. R. Halford, Cumulative fatigue damage. Fatigue and Durability of Structural Materials, pp.123-156, 2006.

K. Masubuchi, Analysis of Welded Structures, p.642, 1980.

D. Mcdiarmid, A general criterion for high cycle multiaxial fatigue failure. Fatigue & Fracture of Engineering Materials & ?. Retrieved from http, 1991.

A. Michel, Pièces mécaniques soudées: Comportement élastique. Techniques de L'ingénieur. Génie Mécanique. Retrieved from http, 2009.

A. Michel, Pièces mécaniques soudées: Rappels et définitions Retrieved from http, 2009.

K. Miller, . Behaviour, . Short, . Cracks, . Their et al., THE, Fatigue & Fracture of Engineering Materials & ?. Retrieved, 1987.
URL : https://hal.archives-ouvertes.fr/hal-00998681

M. Miner, Cumulative damage in fatigue, Journal of Applied Mechanics. Retrieved, 1945.

F. Morel and N. Huyen, Plasticity and damage heterogeneity in fatigue. Theoretical and Applied Fracture Mechanics. Retrieved from http, 2008.

Y. Murakami, Effects of Small Defects and Nonmetallic Inclusions on the Fatigue Strength of Metals, Key Engineering Materials, vol.51, issue.52, 2002.
DOI : 10.4028/www.scientific.net/KEM.51-52.37

J. Muzeau, Constructions métalliques: Assemblages par soudage, pp.1-10, 2009.

Y. Nadot and T. Billaudeau, Multiaxial fatigue limit criterion for defective materials, Engineering Fracture Mechanics, vol.73, issue.1, pp.112-133, 2006.
DOI : 10.1016/j.engfracmech.2005.06.005

A. Nasr, Fiabilité en fatigue polycyclique des matériaux à défaut sous chargement multiaxial, 2009.

I. Ohkawa and H. Takahashi, A STUDY ON FATIGUE CRACK GROWTH UNDER OUT-OF-PHASE COMBINED LOADINGS. Fatigue & Fracture of ?. Retrieved from http, 1997.

T. Palin-luc and S. Lasserre, An energy based criterion for high cycle multiaxial fatigue. European Journal of Mechanics-A/Solids, p.0997753898800843, 1998.
URL : https://hal.archives-ouvertes.fr/hal-01376427

T. Palin-luc and E. Sellier, Elastomer and resin replicas for SEM observation of metallic materials. Experimental ?. Retrieved from http, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01372720

A. Palmgren, Die lebensdauer von kugellagern. Zeitschrift Des Vereins Deutscher Ingenieure, 1924.

I. Papadopoulos, Fatigue polycyclique des métaux: une nouvelle approche. Retrieved from http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:Fatigue+polycyclique +des+métaux, p.0, 1987.

I. Papadopoulos, A new criterion of fatigue strength for out-of-phase bending and torsion of hard metals, International Journal of Fatigue, vol.16, issue.6, pp.377-384, 1994.
DOI : 10.1016/0142-1123(94)90449-9

I. Papadopoulos, A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-23510, 1997.
DOI : 10.1016/S0142-1123(96)00064-3

I. Papadopoulos, Long life fatigue under multiaxial loading, International Journal of Fatigue, vol.23, issue.10, 2001.
DOI : 10.1016/S0142-1123(01)00059-7
URL : http://publications.jrc.ec.europa.eu/repository/handle/JRC22174

I. Papadopoulos and V. Panoskaltsis, Invariant formulation of a gradient dependent multiaxial high-cycle fatigue criterion, Engineering Fracture Mechanics, vol.55, issue.4, pp.513-528, 1996.
DOI : 10.1016/S0013-7944(96)00047-1

J. Papuga and M. R??i?ka, Two new multiaxial criteria for high cycle fatigue computation, International Journal of Fatigue, vol.30, issue.1, 2008.
DOI : 10.1016/j.ijfatigue.2007.02.015

D. Radaj and C. M. Sonsino, Fatigue Assessement of Welded Joints by Local Approaches, 1998.

D. Radenkovic, Stress analysis in tubular joints Steel in Marine Structures, Special and Plenary ?. Retrieved from http, 1981.

R. Des, . De, . Arc, . Liaisons, and . Sol, Norme 01 -50 -026, 2008.

F. Richart and N. Newmark, An hypothesis for the determination of cumulative damage in fatigue. Selected Papers By Nathan M. Newmark ?. Retrieved from http, 1948.

J. L. Robert, Contribution à l'étude de la fatigue multiaxiale sous sollicitations périodiques ou aléatoires, Thèse de l'Institut National des Sciences Appliquées de Lyon, 1992.

M. M. Shahri and R. Sandström, Fatigue analysis of friction stir welded aluminium profile using critical distance, International Journal of Fatigue, vol.32, issue.2, pp.302-309, 2010.
DOI : 10.1016/j.ijfatigue.2009.06.019

G. Sines, Behaviour of metals under complex static and alternating stresses, pp.145-169, 1959.

C. M. Sonsino and C. , Interpretation of overload effects under spectrum loading of welded high-strength steel joints. Welding in the World, pp.11-12, 2011.

E. Statnikov and V. Muktepavel, Efficiency evaluation of ultrasonic impact treatment (UIT) of welded joints in weldox 420 steel in accordance with the IIW program, Applied Ultrasonics, pp.1-30, 2000.

S. Suresh, Fatigue of materials. Retrieved from http, 1998.

D. Taylor, The theory of critical distances: a new perspective in fracture mechanics, 2007.

Y. Verreman and H. Guo, High-cycle fatigue mechanisms in 1045 steel under nonproportional axial-torsional loading. Fatigue & Fracture of Engineering ?. Retrieved from http, 2007.

M. Vincent, C. Nadot-martin, Y. Nadot, and . Dragon, Fatigue from defect under multiaxial loading: Defect Stress Gradient (DSG) approach using ellipsoidal Equivalent Inclusion Method, International Journal of Fatigue, vol.59, pp.176-187, 2014.
DOI : 10.1016/j.ijfatigue.2013.08.027

Q. Vu, Fatigue polycyclique multiaxiale de l'acier C35: caractérisation et modélisation des mécanismes d'endommagement. ISAE-ENSMA Ecole Nationale Supérieure de Mécanique et d'Aérotechique. Retrieved from http, 2009.

Q. Vu, D. Halm, and Y. Nadot, Multiaxial fatigue criterion for complex loading based on stress invariants, International Journal of Fatigue, vol.32, issue.7, 2010.
DOI : 10.1016/j.ijfatigue.2009.11.006

Q. Vu, D. Halm, and Y. Nadot, High cycle fatigue of 1045 steel under complex loading: Mechanisms map and damage modelling, International Journal of Damage Mechanics, vol.23, issue.3, 2014.
DOI : 10.1177/1056789513497977

H. Zenner, A. Simbürger, and J. Liu, On the fatigue limit of ductile metals under complex multiaxial loading, International Journal of Fatigue, vol.22, issue.2, 2000.
DOI : 10.1016/S0142-1123(99)00107-3

X. Zheng, Overload effects on fatigue behaviour and life prediction of low-carbon steels, International Journal of Fatigue, vol.17, issue.5, 1994.
DOI : 10.1016/0142-1123(95)99733-Q