M. Gell, Application opportunities for nanostructured materials and coatings, Materials Science and Engineering: A, vol.204, issue.1-2
DOI : 10.1016/0921-5093(95)09969-7

C. Monterrubio-badillo, H. Ageorges, T. Chartier, J. F. Coudert, and P. Fauchais, Preparation of LaMnO 3 perovskite thin lms by suspension plasma spraying for SOFC cathodes, Surf. Coat. Technol, vol.200, p.37433756, 2006.

F. Toma, L. M. Berger, D. Jacquet, D. Wicky, I. Villaluenga et al., Comparative study on the photocatalytic behaviour of titanium oxide thermal sprayed coatings from powders and suspensions, Surface and Coatings Technology, vol.203, issue.15, p.21502156, 2009.
DOI : 10.1016/j.surfcoat.2008.10.022

K. E. Schneider, V. Belaschenko, M. Dratwinski, S. Siegmann, and A. Zagorski, Thermal Spraying for Power Generation Components, 2006.
DOI : 10.1002/3527609342

C. K. Muoto, E. H. Jordan, M. Gell, and M. Aindow, Identication of desirable precursor properties for solution precursor plasma spray, J. Therm. Spray Techn, vol.20, p.802816, 2011.

D. Chen, E. H. Jordan, and M. Gell, The Solution Precursor Plasma Spray Coatings: Influence of Solvent Type, Plasma Chemistry and Plasma Processing, vol.50, issue.17???18, p.111119, 2010.
DOI : 10.1007/s11090-009-9200-4

R. Vassen, H. Kassner, G. Mauer, and D. Stoever, Suspension plasma spraying: Process characteristics and applications, J. Therm. Spray Techn, vol.19, p.219225, 2010.

J. Karthikeyan, C. C. Berndt, J. Tikkanen, J. Y. Wang, A. H. King et al., Preparation of nanophase materials by thermal spray processing of liquid precursors, Nanostructured Materials, vol.9, issue.1-8, p.137140, 1997.
DOI : 10.1016/S0965-9773(97)00037-8

F. Gitzhofer, E. Bouyer, and M. I. Boulos, Atomized into droplets, injection into plasma discharge, vaporization and agglomeration into partially melted drops, p.921, 1997.

R. Vassen, A. Stuke, and D. Stoever, Recent developments in the eld of thermal barrier coatings, J. Therm. Spray. Technol, vol.18, p.181186, 2009.

M. Saremi, A. Afrasiabi, and A. Kobayashi, Microstructural analysis of YSZ and YSZ/Al 2 O 3 plasma sprayed thermal barrier coatings after high temperature oxidation, Surf. Coat. Technol, vol.202, p.32333238, 2008.

A. Kulkarni, A. Vaidya, A. Goland, S. Sampath, and H. Herman, Processing eects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings, Mater. Sci. Eng., A, vol.359, p.100111, 2003.

K. Nakata and A. Fujishima, TiO 2 photocatalysis: Design and applications, J

R. Henne, Solid Oxide Fuel Cells: A Challenge for Plasma Deposition Processes, Journal of Thermal Spray Technology, vol.5, issue.4, p.381403, 2007.
DOI : 10.1007/s11666-007-9053-4

P. Fauchais, Understanding plasma spraying, Journal of Physics D: Applied Physics, vol.37, issue.9, pp.86-108, 2004.
DOI : 10.1088/0022-3727/37/9/R02
URL : https://hal.archives-ouvertes.fr/hal-00944489

M. A. Lieberman and A. J. Lichtenberg, Principles of plasma discharges and materials processing, 1994.
DOI : 10.1002/0471724254

M. I. Boulos, P. Fauchais, and E. Pfender, Thermal plasmas: fundamentals and applications, 1994.
DOI : 10.1007/978-1-4899-1337-1

P. M. Bellan, Fundamentals of Plasma Physics, 2006.
DOI : 10.1017/CBO9780511807183

P. Fauchais and A. Vardelle, Pending problems in thermal plasmas and actual development, Plasma Physics and Controlled Fusion, vol.42, issue.12B, pp.365-383, 2000.
DOI : 10.1088/0741-3335/42/12B/327

J. Heberlein, Electrode Phenomena in Plasma Torches Heat and mass transfer under plasma conditions, Ann. N.Y. Acad. Sci, vol.891, p.1427, 1999.

A. A. Sadek, U. Masao, and M. Fukuhisa, Eect of rare earth metal oxide additions to tungsten electrodes, Metall. Trans. A, pp.21-32213236, 1990.

P. Fauchais, J. F. Coudert, and B. Pateyron, La production des plasmas thermiques, Revue G??n??rale de Thermique, vol.35, issue.416, p.543560, 1996.
DOI : 10.1016/S0035-3159(99)80081-6

J. F. Coudert, M. P. Planche, and P. Fauchais, Velocity measurement of DC plasma jets based on arc root uctuations, Plasma Chem Plasma Process, vol.15, p.4770, 1995.

A. Fridman and Y. I. Cho, Advances in Heat Transfer: Transport Phenomena in Plasma, 2007.

P. Roumilhac, Contribution to the metrology and understanding of the DC plasma spray torches and transferred arcs for reclamation at atmospheric pressure, 1990.

Z. Duan and J. Heberlein, Arc Instabilities in a Plasma Spray Torch, Journal of Thermal Spray Technology, vol.11, issue.1, p.4451, 2002.
DOI : 10.1361/105996302770348961

S. A. Wutzke, E. Pfender, and E. R. Eckert, Study of electric arc behavior with superimposed ow, AIAA Journal, vol.5, p.707713, 1967.

M. I. Boulos, Advanced course on thermal plasmas technology and applications, 1985.

M. Leylavergne, B. Dussoubs, A. Vardelle, and N. Goubot, Comparison of plasmasprayed coatings produced in argon or nitrogen atmosphere, J. Therm. Spray Techn, vol.7, p.527536, 1998.

P. Fauchais, V. Rat, J. Coudert, R. Etchart-salas, and G. Montavon, Operating parameters for suspension and solution plasma-spray coatings, Surface and Coatings Technology, vol.202, issue.18, p.43094317, 2008.
DOI : 10.1016/j.surfcoat.2008.04.003
URL : https://hal.archives-ouvertes.fr/hal-00322129

A. Killinger, Thermokinetische beschichtungsverfahren zur verarbeitung submikronund nanoskaliger werkstoe, Proceedings of Fertigungstechnisches Kolloquium Stuttgart, 2010.

J. Fazilleau, Contribution à la compréhension des phénomènes impliqués dans la réalisation de dépôts nement structurés d'oxydes par projection de suspensions par plasma, 2003.

O. Marchand, L. Girardot, M. P. Planche, P. Bertrand, Y. Bailly et al., An Insight into Suspension Plasma Spray: Injection of the Suspension and Its Interaction with the Plasma Flow, Journal of Thermal Spray Technology, vol.2, issue.4, p.13101320, 2011.
DOI : 10.1007/s11666-011-9682-5

P. Fauchais, A. Joulia, S. Goutier, C. Chazelas, M. Vardelle et al., Suspension and solution plasma spraying, Journal of Physics D: Applied Physics, vol.46, issue.22, pp.224015-2013
DOI : 10.1088/0022-3727/46/22/224015
URL : https://hal.archives-ouvertes.fr/hal-00908790

H. S. Jazi, Advanced Plasma Spray Applications, InTech, 2012.

N. Ashgriz, Handbook of Atomiztion and Sprays, Theory and Applications, 2011.

L. Wang, Y. Wang, X. G. Sun, J. Q. He, Z. Y. Pan et al., Thermal shock behavior of 8YSZ and double-ceramic-layer La 2 Zr 2 O 7 /8YSZ thermal barrier coatings fabricated by atmospheric plasma spraying, Ceram. Int, vol.38, p.35953606, 2012.

S. W. Kweh, K. A. Khor, and P. Cheang, The production and characterization of hydroxyapatite (HA) powders, Journal of Materials Processing Technology, vol.89, issue.90, pp.89-90373377, 1999.
DOI : 10.1016/S0924-0136(99)00061-8

L. Pawlowski, Suspension and solution thermal spray coatings, Surface and Coatings Technology, vol.203, issue.19, p.28072829, 2009.
DOI : 10.1016/j.surfcoat.2009.03.005

J. Fazilleau, C. Delbos, V. Rat, J. F. Coudert, P. Fauchais et al., Phenomena Involved in Suspension Plasma Spraying Part 1: Suspension Injection and Behavior, Plasma Chemistry and Plasma Processing, vol.5, issue.144, p.371391, 2006.
DOI : 10.1007/s11090-006-9019-1
URL : https://hal.archives-ouvertes.fr/hal-00131188

R. Etchart-salas, V. Rat, J. Coudert, P. Fauchais, N. Caron et al., Inuence of Plasma Instabilities in Ceramic Suspension Plasma Spraying, J. Therm. Spray Techn, vol.16, p.857865, 2007.

R. Etchart-salas, Approche expérimentale et analytique des phénomènes impliqués dans la reproductibilité et la qualité des dépôts, 2007.

P. Blazdell and S. Kuroda, Plasma spraying of submicron ceramic suspensions using a continuous ink jet printer, Surface and Coatings Technology, vol.123, issue.2-3, p.239246, 2000.
DOI : 10.1016/S0257-8972(99)00440-5

J. Oberste-berghaus, S. Bouaricha, J. Legoux, and C. Moreau, Injection conditions and in-ight particle states in suspension plasma spraying of alumina and zirconia nano-ceramics, Proceedings of the International Thermal Spray Conference and Exposition (ITSC), p.512518, 2005.

M. Pilch and C. A. Erdman, Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop, International Journal of Multiphase Flow, vol.13, issue.6, p.741757, 1987.
DOI : 10.1016/0301-9322(87)90063-2

S. Basu, E. H. Jordan, and B. M. Cetegen, Fluid Mechanics and Heat Transfer of Liquid Precursor Droplets Injected into High-Temperature Plasmas, Journal of Thermal Spray Technology, vol.33, issue.2, p.6072, 2008.
DOI : 10.1007/s11666-007-9140-6

S. Saha, B. Seal, S. Cetegen, E. Jordan, A. Ozturk et al., Thermo-physical processes in cerium nitrate precursor droplets injected into high temperature plasma, Surface and Coatings Technology, vol.203, issue.15, p.20812091, 2009.
DOI : 10.1016/j.surfcoat.2008.09.018

P. Fauchais, J. V. Heberlein, and B. M. , Thermal Spray Fundamentals, From Powder to Part, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00946557

O. Tingaud, A. Grimaud, A. Denoirjean, G. Montavon, V. Rat et al., Suspension Plasma-Sprayed Alumina Coating Structures: Operating Parameters Versus Coating Architecture, Journal of Thermal Spray Technology, vol.2, issue.3, 2008.
DOI : 10.1007/s11666-008-9218-9
URL : https://hal.archives-ouvertes.fr/hal-00352607

H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of Suspension Plasma Spraying (SPS) for Manufacture of Ceramic Coatings, Journal of Thermal Spray Technology, vol.305, issue.178
DOI : 10.1007/s11666-007-9144-2

V. Rat and J. F. Coudert, A simplied analytical model for dc plasma spray torch: inuence of gas properties and experimental conditions, J. Phys. D: Appl. Phys, vol.39, p.47994807, 2006.

J. P. Trelles, Finite Element Modeling of Flow Instabilities in Arc Plasma Torches, 2007.

J. P. Trelles, E. Pfender, and J. Heberlein, Multiscale Finite Element Modeling of Arc Dynamics in a DC Plasma Torch, Plasma Chemistry and Plasma Processing, vol.48, issue.6, p.557575, 2006.
DOI : 10.1007/s11090-006-9023-5

J. P. Trelles, E. Pfender, and J. V. Heberlein, Modelling of the arc reattachment process in plasma torches, Journal of Physics D: Applied Physics, vol.40, issue.18, p.56355648, 2007.
DOI : 10.1088/0022-3727/40/18/019

X. Tu, B. G. Chéron, J. H. Yan, and K. F. Cen, Electrical and spectroscopic diagnostic of an atmospheric double arc argon plasma jet, Plasma Sources Science and Technology, vol.16, issue.4, p.803812, 2007.
DOI : 10.1088/0963-0252/16/4/016

L. Leblanc and C. Moreau, Study on the Long-term Stability of Plasma Spraying, Proceedings of the 1st International Thermal Spray Conference, p.306317, 2000.

J. F. Coudert, M. P. Planche, and P. Fuachais, Characterization of d.c. plasma torch voltage uctuations, Plasma Chem. Plasma Proc, vol.16, 1996.

O. P. Solonenko, Thermal Plasma Torches and Technologies Plasma Torches, Basic Studies and Design, Cambridge International Science Publishing, vol.1, 2003.

J. Schein, J. Zierhut, M. Dzulko, G. Forster, and K. D. Landes, Improved Plasma Spray Torch Stability Through Multi-Electrode Design, Contributions to Plasma Physics, vol.47, issue.7, pp.498-504, 2007.
DOI : 10.1002/ctpp.200710064

. W. Fr, A. Bach, T. Laarmann, and . Wenz, Modern Surface Technology, Viley VCH, 2006.

J. Marques, G. Forster, and J. Schein, Multi-Electrode Plasma Torches: Motivation for Development and Current State-of-the-Art, The Open Plasma Physics Journal, vol.2, issue.2, p.8998, 2009.
DOI : 10.2174/1876534300902020089

H. Nishiyama, Magnetic control of homogeneous and dust-laden plasma jets, Pure and Applied Chemistry, vol.71, issue.10, p.18991907, 1999.
DOI : 10.1351/pac199971101899

H. Nishiyama, H. Tsukada, Y. Matsushima, and S. Kamiyama, The eect of an applied magnetic eld on non-equilibrium plasma ow along a biased at plate, J

F. Younis, S. A. Zaabi, M. Nader, W. Yousif, and A. R. Beig, Design and challenges of current sensing and harmonic extraction for active power ltering for an industrial drive in oil and gas industry, IEEE proceeding, p.16, 2012.

L. Delair, X. Tu, A. Bultel, and B. G. Cheron, HELMHOLTZ BEHAVIOR OF A NITROGEN PLASMA ARC CHAMBER, High Temperature Material Processes (An International Quarterly of High-Technology Plasma Processes), vol.9, issue.4, p.583597, 2005.
DOI : 10.1615/HighTempMatProc.v9.i4.80
URL : https://hal.archives-ouvertes.fr/hal-00639617

Y. H. Kweon, T. Aoki, Y. Miyazato, H. D. Kim, and T. Setoguchi, Computational study of an incident shock wave into a Helmholtz resonator, Computers & Fluids, vol.35, issue.10, p.12521263, 2006.
DOI : 10.1016/j.compfluid.2005.09.001

E. C. Fernandes and R. E. Leandro, Modeling and experimental validation of unsteady impinging ames, Comput. Fluids, vol.146, p.674686, 2006.

V. Rat and J. F. Coudert, Pressure and arc voltage coupling in dc plasma torches: Identification and extraction of oscillation modes, Journal of Applied Physics, vol.108, issue.4, p.433048, 2010.
DOI : 10.1063/1.3466982
URL : https://hal.archives-ouvertes.fr/hal-00567991

V. Rat and J. F. Coudert, Acoustic stabilization of electric arc instabilities in nontransferred plasma torches, Applied Physics Letters, vol.96, issue.10, p.1015033, 2010.
DOI : 10.1063/1.3354007
URL : https://hal.archives-ouvertes.fr/hal-00481175

J. Krowka, V. Rat, and J. F. Coudert, Resonant mode for a dc plasma spray torch by means of pressure???voltage coupling: application to synchronized liquid injection, Journal of Physics D: Applied Physics, vol.46, issue.22
DOI : 10.1088/0022-3727/46/22/224018
URL : https://hal.archives-ouvertes.fr/hal-00907543

J. Krowka, V. Rat, and J. F. Coudert, Investigation and control of dc arc jet instabilities to obtain a self-sustained pulsed laminar arc jet, Journal of Physics D: Applied Physics, vol.46, issue.50, 2013.
DOI : 10.1088/0022-3727/46/50/505206
URL : https://hal.archives-ouvertes.fr/hal-00946568

]. B. Pateyron, TTWinner free download from www.unilim.fr/spcts or http

A. Vardelle, P. Fauchais, B. Dussoubs, and N. J. Themelis, Heat generation and particle injection in a thermal plasma torch, Plasma Chemistry and Plasma Processing, vol.18, issue.4, pp.551-574, 1998.
DOI : 10.1023/A:1021815417648

J. F. Coudert, V. Rat, and D. Rigot, Influence of Helmholtz oscillations on arc voltage fluctuations in a dc plasma spraying torch, Journal of Physics D: Applied Physics, vol.40, issue.23, pp.7357-7366, 2007.
DOI : 10.1088/0022-3727/40/23/016
URL : https://hal.archives-ouvertes.fr/hal-00257222

J. Krowka, V. Rat, S. Goutier, and J. F. Coudert, Synchronization of suspension plasma spray injection with the arc uctuations, J. Therm. Spray Technol, vol.23, 2014.

R. Ye, P. Proulx, and M. I. Boulos, Turbulence phenomena in the radio frequency induction plasma torch, International Journal of Heat and Mass Transfer, vol.42, issue.9, p.15851595, 1999.
DOI : 10.1016/S0017-9310(98)00260-9

R. Noguera, M. Lejeune, and T. Chartier, 3D ne scale ceramic components formed by ink-jet prototyping process, J. Eur. Ceram. Soc, vol.25, p.20552059, 2005.

B. Gans and U. S. Schubert, Inkjet Printing of Polymer Micro-Arrays and Libraries: Instrumentation, Requirements, and Perspectives, Macromolecular Rapid Communications, vol.24, issue.11, p.659666, 2003.
DOI : 10.1002/marc.200350010

C. Kullmann, N. C. Schirmer, M. Lee, S. H. Ko, N. Hotz et al., 3D micro-structures by piezoelectric inkjet printing of gold nanofluids, Journal of Micromechanics and Microengineering, vol.22, issue.5, pp.55022-2012
DOI : 10.1088/0960-1317/22/5/055022

H. Kunze, Introduction to Plasma Spectroscopy, 2009.
DOI : 10.1007/978-3-642-02233-3

F. R. Gilmore, R. R. Laher, and P. J. Espy, ???Centroids, Electronic Transition Moments, and Einstein Coefficients for Many Nitrogen and Oxygen Band Systems, Journal of Physical and Chemical Reference Data, vol.21, issue.5, p.1005, 1992.
DOI : 10.1063/1.555910

C. O. Laux, Optical Diagnostics and Collisional-Radiative Models. VKI Course on Hypersonic Entry and Cruise Vehicles, 2008.

G. Herzberg, Molecular Spectra and Molecular Structure. I. Spectra of Diatomic Molecules, American Journal of Physics, vol.19, issue.6, 1950.
DOI : 10.1119/1.1932852

J. C. De and . Vos, A new determination of the emissivity of tungsten ribbon, p.690714, 1954.

C. Parigger, D. H. Plemmons, J. O. Hornkohl, and J. W. Lewis, Temperature measurements from first-negative N2+ spectra produced by laser-induced multiphoton ionization and optical breakdown of nitrogen, Applied Optics, vol.34, issue.18, pp.3331-3336, 1995.
DOI : 10.1364/AO.34.003331

P. J. Bruggeman, N. Sadeghi, D. C. Schram, and V. Linss, Gas temperature determination from rotational lines in non-equilibrium plasmas: a review, Plasma Sources Science and Technology, vol.23, issue.2, pp.23001-2014
DOI : 10.1088/0963-0252/23/2/023001
URL : https://hal.archives-ouvertes.fr/hal-01006011

D. M. Phillips, Determination of gas temperature from unresolved bands in the spectrum from a nitrogen discharge, Journal of Physics D: Applied Physics, vol.9, issue.3, p.507521, 1975.
DOI : 10.1088/0022-3727/9/3/017

C. O. Laux and C. H. Kruger, Arrays of radiative transition probabilities for the N 2 rst and second positive, and O 2 Schumann-Runge ban systems, J. Quant. Spectrosc. Radiat. Transfer, vol.48, p.924, 1992.

S. Florek and H. Becker-ross, High-resolution spectrometer for atomic spectrometry, Journal of Analytical Atomic Spectrometry, vol.10, issue.2, p.145147, 1995.
DOI : 10.1039/ja9951000145

Y. Tanaka, T. Nagumo, H. Sakai, Y. Uesugi, Y. Sakai et al., Nanoparticle synthesis using high-powered pulse-modulated induction thermal plasma, Journal of Physics D: Applied Physics, vol.43, issue.26, p.265201, 2010.
DOI : 10.1088/0022-3727/43/26/265201

G. Mauer, A. Guignard, and R. Vassen, Plasma spraying of ecient photoactive TiO 2 coatings, Surf. Coat. Technol, vol.220, p.4043, 2013.

P. Michaux, G. Montavon, A. Grimaud, A. Denoirjean, and P. Fauchais, Elaboration of Porous NiO/8YSZ Layers by Several SPS and SPPS Routes, Journal of Thermal Spray Technology, vol.106, issue.5-6, p.317327, 2010.
DOI : 10.1007/s11666-009-9450-y
URL : https://hal.archives-ouvertes.fr/hal-00451594

G. Darut, H. Ageorges, A. Denoirjean, and P. Fauchais, Tribological performances of YSZ composite coatings manufactured by suspension plasma spraying, Surface and Coatings Technology, vol.217, p.172180, 2013.
DOI : 10.1016/j.surfcoat.2012.12.008
URL : https://hal.archives-ouvertes.fr/hal-00907639

G. , D. Girolamo, F. Marra, L. Pilloni, G. Pulci et al., Microstructure and wear behavior of plasma-sprayed nanostructured WC-Co coatings, International Journal of Applied Ceramic Technology, vol.10, p.6071, 2013.

N. Curry, K. Van-every, T. Snyder, and N. Markocsan, Thermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier Coatings, Coatings, vol.4, issue.3, p.630650, 2014.
DOI : 10.3390/coatings4030630

L. Bianchi, A. C. Leger, M. Vardelle, A. Vardelle, and P. Fauchais, Splat formation and cooling of plasma-sprayed zirconia, Thin Solid Films, vol.305, issue.1-2, p.3547, 1997.
DOI : 10.1016/S0040-6090(97)80005-3

P. Fauchais, M. Fukumoto, A. Vardelle, and M. Vardelle, Knowledge Concerning Splat Formation: An Invited Review, Journal of Thermal Spray Technology, vol.13, issue.3, p.337360, 2004.
DOI : 10.1361/10599630419670

R. B. Heimann, Plasma-Spray Coating: Principles and Applications, 1996.
DOI : 10.1002/9783527614851

P. Fauchais, A. Vardelle, and B. Dussoubs, <I>Quo Vadis</I> Thermal Spraying?, Journal of Thermal Spray Technology, vol.10, issue.1, p.4466, 2001.
DOI : 10.1361/105996301770349510

A. Vardelle, C. Chazelas, C. Marchand, and G. Mariaux, Modelling time-dependent phenomena in plasma spraying of liquid precursors, Pure Appl. Chem, vol.80, 2008.

L. Leblanc and C. Moreau, The Long-Term Stability of Plasma Spraying, Journal of Thermal Spray Technology, vol.11, issue.3, p.380386, 2002.
DOI : 10.1361/105996302770348772

R. M. Young and E. Pfender, A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc, Plasma Chemistry and Plasma Processing, vol.54, issue.A, p.465481, 1989.
DOI : 10.1007/BF01023914

S. W. Rienstra and A. Hirschberg, An Introduction to Acoustics, 2014.

V. Kopecky and M. Hrabovsky, Resonant Excitation of Boundary Layer Instability of DC Arc Plasma Jet by Current Modulation, Plasma Chemistry and Plasma Processing, vol.74, issue.6, p.827838, 2011.
DOI : 10.1007/s11090-011-9317-0

E. Moreau, C. Chazelas, G. Mariaux, and A. Vardelle, Modeling the Restrike Mode Operation of a DC Plasma Spray Torch, Journal of Thermal Spray Technology, vol.15, issue.4, p.524530, 2006.
DOI : 10.1361/105996306X147306
URL : https://hal.archives-ouvertes.fr/hal-00131182

J. P. Trelles, C. Chazelas, A. Vardelle, and J. V. Heberlein, Arc Plasma Torch Modeling, Journal of Thermal Spray Technology, vol.38, issue.2, p.728752, 2009.
DOI : 10.1007/s11666-009-9342-1
URL : https://hal.archives-ouvertes.fr/hal-00450921

R. Benocci, R. Florio, A. Galassi, M. Paolicchio, M. Piselli et al., Experimental study for the optimization of plasma torch operations

S. Paik, P. C. Huang, J. Heberlein, and E. Pfender, Determination of the arc-root position in a DC plasma torch, Plasma Chemistry and Plasma Processing, vol.144, issue.3, p.379397, 1993.
DOI : 10.1007/BF01465872

. Th and . Peters, Uber den zusammenhang des steenbeckschen minimumprinzips mit dem thermodynamischen prinzip der minimalen entropieerzeugung. Zeitschrift fur Physik, p.612631, 1956.

V. Rat and J. F. Coudert, Torche à plasma et procédé de stabilisation d'une torche à plasma. Plasma torch and method for stabilizing a plasma torch, pp.502-468, 2011.

J. F. Coudert and V. Rat, Inuence of conguration and operating conditions on the electric arc instabilities of a plasma spray torch: role of acoustic resonance, J

J. F. Coudert and P. Fuachais, Transient Phenomena in d.c. Plasma-Spray Torches, Annals of the New York Academy of Sciences: Heat and mass transfer under plasma conditions, p.382390, 1999.
DOI : 10.1023/A:1021606701022

Y. Wang, J. Legoux, R. Neagu, S. Hui, and B. R. Marple, Suspension Plasma Spray and Performance Characterization of Half Cells with NiO/YSZ Anode and YSZ Electrolyte, Journal of Thermal Spray Technology, vol.176, issue.5-6, p.715, 2012.
DOI : 10.1007/s11666-011-9696-z

X. Q. Cau, R. Vassen, and D. Stoever, Ceramic materials for thermal barrier coatings, Journal of the European Ceramic Society, vol.24, issue.1, p.110, 2004.
DOI : 10.1016/S0955-2219(03)00129-8

E. P. Busso, J. Lin, S. Sakurai, and M. Nakayama, A mechanistic study of oxidationinduced degradation in a plasma-sprayed thermal barrier coating system.: Part i: model formulation, Acta Mater, vol.49, p.15151528, 2001.

M. Gell, J. Eric, V. Krishnakumar, K. Mccarron, B. Barber et al., Bond strength, bond stress and spallation mechanisms of thermal barrier coatings, Surface and Coatings Technology, vol.120, issue.121, pp.120-1215360, 1999.
DOI : 10.1016/S0257-8972(99)00338-2

W. J. Quadakkers, V. Shemet, D. Sebold, R. Anton, E. Wessel et al., Oxidation characteristics of a platinized MCrAlY bond coat for TBC systems during cyclic oxidation at 1000 ??C, Surface and Coatings Technology, vol.199, issue.1, p.7782, 2005.
DOI : 10.1016/j.surfcoat.2004.11.038

U. Fantz, Basics of plasma spectroscopy, Plasma Sources Science and Technology, vol.15, issue.4, pp.137-147, 2006.
DOI : 10.1088/0963-0252/15/4/S01

. Ch and . De-izarra, Calibration d'une lampe à lament de tungstène, 2009.

A. Fierro, G. Laity, and A. Neuber, Optical emission spectroscopy study in the VUV???VIS regimes of a developing low-temperature plasma in nitrogen gas, Journal of Physics D: Applied Physics, vol.45, issue.49
DOI : 10.1088/0022-3727/45/49/495202

A. Lofthus and P. Krupenie, The spectrum of molecular nitrogen, Journal of Physical and Chemical Reference Data, vol.6, issue.1, p.113307, 1977.
DOI : 10.1063/1.555546