M. Paysannes-de-france, Fiches conseils athebat, 2014.

B. Peuportier, Livre blanc sur les recherches en énergétique des bâtiments, 2013.

M. Woloszyn and C. Rode, Tools for performance simulation of heat, air and moisture conditions of whole buildings, Building Simulation, vol.2, issue.112, pp.5-24, 2008.
DOI : 10.1007/s12273-008-8106-z

URL : https://hal.archives-ouvertes.fr/hal-00353433

N. Mendes and P. C. Philippi, A method for predicting heat and moisture transfer through multilayered walls based on temperature and moisture content gradients, International Journal of Heat and Mass Transfer, vol.48, issue.1, pp.37-51, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.08.011

. Bc-bauklimatik-dresden, Simulation program for the calculation of coupled heat, moisture, air, pollutant, and salt transport, 2011.

C. Direction-territoriale-nord-picardie, renforcement de l'isolation dans l'existant et évaluation des risques liés à l'humidité" (HUMIRISK) -direction territoriale nord-picardie, 2010.

A. Nationale-de-la-recherche, Fiche projet HABISOL, 2010.

A. Nationale-de-la-recherche, Fiche projet batiment et villes durables (BVD), 2011.

C. Est, . Lmdc-toulouse, M. Ensa-toulouse, and . Paysannes-de-france, Projet hygroba, rapport tâche 4, 2011.

M. Isabel, M. Torres, and V. Peixoto-de-freitas, Treatment of rising damp in historical buildings : wall base ventilation, Building and Environment, vol.42, issue.1, pp.424-435, 2007.

H. Viitanen, Moisture and Bio-deterioration Risk of Building Materials and Structures, Journal of Building Physics, vol.33, issue.3, pp.201-224, 2010.
DOI : 10.1177/1744259109343511

K. Beck, M. Al-mukhtar, O. Rozenbaum, and M. Rautureau, Characterization, water transfer properties and deterioration in tuffeau : building material in the loire (valleyfrance ) Building and Environment, pp.9-101151, 2003.

K. Beck, Study of hygric property and deterioration process of limestone (in French), 2006.

J. Morel, Q. Bui, and E. Hamard, weathering and durability of earthen material and structures. Modern earth buildings : Materials, engineering, constructions and applications, 2012.

S. N. Shoukry, G. W. William, B. Downie, and M. Y. Riad, Effect of moisture and temperature on the mechanical properties of concrete, Construction and Building Materials, vol.25, issue.2, pp.688-696, 2011.
DOI : 10.1016/j.conbuildmat.2010.07.020

J. Ozbolt, G. Grassegger, P. Van-der-veken, G. Periskic, and H. Reinhardt, Experimental and numerical study of hygro-thermo-mechanical properties of "schilfsandstein" from baden-württemberg, pp.535-546, 2008.

D. Derome, Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope, 1999.

H. M. Künzel and P. Kiessl, Simultaneous heat and moisture transport in building components : one-and two-dimensional calculation using simple parameters, 1995.

D. Samri, Analyse physique et caractérisation hygrothermique des matériaux de construction : approche expérimentale, modélisation numérique, 2008.

M. Chereches, Etude expérimentale sur la conductivité thermique des matériaux humides . XXVI e rencontres Universitaires de Génie Civil, 2008.

F. Domínguez-muñoz, B. Anderson, and M. Josó, Cejudo-López, and A. Carrillo-Andrés. Uncertainty in the thermal conductivity of insulation materials, Energy and Buildings, issue.11, pp.422159-2168, 2010.

T. Weiss, S. Siegesmund, D. Kirchner, and J. Sippel, Insolation weathering and hygric dilatation: two competitive factors in stone degradation, Environmental Geology, vol.46, issue.3-4, pp.3-4402, 2004.
DOI : 10.1007/s00254-004-1041-0

J. D. Mertz and P. P. , Comportement dilatométrique de mortiers de chaux et coulis pour la restauration : un nouveau critère de durabilité des ré-assemblages de pierres fissurées, Conservation du patrimoine bâti, 2010.

T. Wangler, G. Rge, and W. Scherer, Clay swelling mechanism in clay-bearing sandstones, Environmental Geology, vol.45, issue.2, pp.529-534, 2008.
DOI : 10.1007/s00254-008-1380-3

E. Colas, Impact de l'humidité et des solutions salines sur le comportement dimensionnel de grès du Buntsandstein : contribution à la sélection de faciès de restauration, 2011.

E. Colas, J. D. Mertz, C. Thomachot-schneider, V. Barbin, and F. Rassineux, Influence of the clay coating properties on the dilation behavior of sandstones, Applied Clay Science, vol.52, issue.3, pp.245-252, 2011.
DOI : 10.1016/j.clay.2011.02.026

C. Davie, C. Pearce, and N. Bicanic, A fully generalised, coupled, multi-phase, hygro-thermo-mechanical model for concrete, Materials and Structures, vol.39, issue.3, pp.13-33, 2010.
DOI : 10.1617/s11527-010-9591-y

M. Khoshbakht and M. W. Lin, A finite element model for hygro-thermo-mechanical analysis of masonry walls with FRP reinforcement. Finite Elements in Analysis and Design, pp.783-791, 2010.

F. Thibeault, Modelling wood mechanical behaviour during drying process (in French), 2008.

F. Thibeault, D. Marceau, R. Younsi, and D. Kocaefe, Numerical and experimental validation of thermo-hygro-mechanical behaviour of wood during drying process, International Communications in Heat and Mass Transfer, vol.37, issue.7, pp.756-760, 2010.
DOI : 10.1016/j.icheatmasstransfer.2010.04.005

V. Nguyen, J. Tue, F. C. Li, and . Caner, Microplane constitutive model m4l for concrete. i : Theory. Computers Structures, pp.219-229, 2013.

J. Li, N. V. Tue, and F. C. Caner, Microplane constitutive model M4L for concrete. II: Calibration and validation, Computers & Structures, vol.128, issue.0, pp.146-159, 2013.
DOI : 10.1016/j.compstruc.2013.06.009

I. J. Gonzalez and G. W. Scherer, Effect of swelling inhibitors on the swelling and stress relaxation of clay bearing stones, Environmental Geology, vol.46, issue.3-4, pp.364-377, 2004.
DOI : 10.1007/s00254-004-1038-8

J. J. Del-coz-díaz, A. L. Martínez-luengas, J. M. Adam, and A. M. Rodríguez, Non-linear hygrothermal failure analysis of an external clay brick wall by FEM ??? A case study, Construction and Building Materials, vol.25, issue.12, pp.4454-4464, 2011.
DOI : 10.1016/j.conbuildmat.2010.12.039

M. Goulet and E. Ouellet, Effet de la teneur en humidité du bois sur sa résistance à la traction transversale. Dép. d'Exploitation et, 1968.

M. Mamillan, Restauration des bâtiments en pierre, 1994.

K. R. Lisø, T. Kvande, H. O. Hygen, J. V. Thue, and K. Harstveit, A frost decay exposure index for porous, mineral building materials, Building and Environment, vol.42, issue.10, pp.423547-3555, 2007.
DOI : 10.1016/j.buildenv.2006.10.022

A. Bourges, S. Hanna, and S. Simon, Stone susceptibility to frost damage : comparison of three english magnesian limestones The National museum, proceedings from the international conference Salt weathering on Buildings and Stone Sculptures, 2008.

J. Kruschwitz and J. Bluhm, Modeling of ice formation in porous solids with regard to the description of frost damage, Computational Materials Science, vol.32, issue.3-4, pp.407-417, 2005.
DOI : 10.1016/j.commatsci.2004.09.025

P. Haeupl and Y. Xu, Numerical simulation of freezing and melting in porous materials under the consideration of the coupled heat and moisture transport, Journal of Building Physics, vol.25, issue.1, pp.4-31, 2001.

F. Kong and H. Wang, Heat and mass coupled transfer combined with freezing process in building materials: Modeling and experimental verification, Energy and Buildings, vol.43, issue.10, pp.2850-2859, 2011.
DOI : 10.1016/j.enbuild.2011.07.004

M. Mutlutürk, R. Altindag, and G. Turk, A decay function model for the integrity loss of rock when subjected to recurrent cycles of freezing-thawing and heatin-cooling. Internation journal of rock mechanism and mining sciences, pp.237-244, 2004.

A. G. Nord, Efflorescence salts on weathered building stone in Sweden, Geologiska Foereningan i Stockholm. Foerhandlingar, vol.530, issue.4
DOI : 10.1017/S0024282985000305

A. Andrés, M. C. Díaz, A. Coz, M. J. Abellán, and J. R. Viguri, Physico-chemical characterisation of bricks all through the manufacture process in relation to efflorescence salts, Journal of the European Ceramic Society, vol.29, issue.10, pp.291869-1877, 2009.
DOI : 10.1016/j.jeurceramsoc.2008.11.015

N. Sghaier-ben-chiekh, Drying process with presence of salts in porous media, 2006.

G. W. Scherer, Stress from crystallization of salt, Cement and Concrete Research, vol.34, issue.9, pp.1613-1624, 2004.
DOI : 10.1016/j.cemconres.2003.12.034

P. Lopez-arce, J. Garcia-guinea, D. Benavente, L. Tormo, and E. Doehne, Deterioration of dolostone by magnesium sulphate salt: An example of incompatible building materials at Bonaval Monastery, Spain, Construction and Building Materials, vol.23, issue.2, pp.846-855, 2009.
DOI : 10.1016/j.conbuildmat.2008.04.001

S. Veran-tissoires, Surface or inside cristallisation in porous media (in Frence), 2011.

A. B. Yavuz and T. Topal, Thermal and salt crystallization effects on marble deterioration: Examples from Western Anatolia, Turkey, Engineering Geology, vol.90, issue.1-2, pp.30-40, 2007.
DOI : 10.1016/j.enggeo.2006.11.005

L. A. Rijniers, L. Pel, H. P. Huinink, and K. Kopinga, Salt crystallization as damage mechanism in porous building materials???a nuclear magnetic resonance study, Magnetic Resonance Imaging, vol.23, issue.2, pp.273-276, 2005.
DOI : 10.1016/j.mri.2004.11.023

A. L. Rijniers and T. Universiteit, Salt Crystallization in Porous Materials : An NMR Study, 2004.

M. Angeli, J. Bigas, B. Menéndez, R. Hébert, and C. David, Altération par les sels des pierres de construction : Influence des propriétés capillaires et des conditions d'évaporation, Construire : les nouveaux défis, 2006.

J. Monlouis-bonnaire, Modelisation numerique des transferts couples air-eau-sel dans les materiaux cimentaires et les terres cuites. phdthesis, 2003.

S. Bonnet, Influence du chlore sur le comportmenet à l'équilibre et sur les propriétés de transfert de matériaux du génie cilvil, 1997.

M. Koniorczyk and D. Gawin, Heat and Moisture Transport in Porous Building Materials Containing Salt, Journal of Building Physics, vol.31, issue.4, pp.279-300, 2008.
DOI : 10.1177/1744259107088003

G. W. Scherer, Crystallization in pores, Cement and Concrete Research, vol.29, issue.8, pp.1347-1358, 1999.
DOI : 10.1016/S0008-8846(99)00002-2

M. Steiger, Crystal growth in porous materials???II: Influence of crystal size on the crystallization pressure, Journal of Crystal Growth, vol.282, issue.3-4, pp.470-481, 2005.
DOI : 10.1016/j.jcrysgro.2005.05.008

H. Derluyn, Salt Transport and crystallization in porous limestone : neutron -X-ray imaging and poromechanical modeling, 2006.

T. Q. Nguyen, J. Petkovi´cpetkovi´c, P. Dangla, and V. Baroghel-bouny, Modelling of coupled ion and moisture transport in porous building materials, Construction and Building Materials, vol.22, issue.11, pp.2185-2195, 2008.
DOI : 10.1016/j.conbuildmat.2007.08.013

URL : https://hal.archives-ouvertes.fr/hal-00906075

A. Nicolai, Modeling and Numerical Simulation of Salt Transport and Phase Transitions in Unsaturated Porous Building Materials, 2008.

R. M. Espinosa, L. Franke, and G. Deckelmann, Model for the mechanical stress due to the salt crystallization in porous materials, Construction and Building Materials, vol.22, issue.7, pp.1350-1367, 2008.
DOI : 10.1016/j.conbuildmat.2007.04.013

A. Poupeleer, Transport and crystallization of dissolved salts in cracked porous building materials, 2007.

A. Palot, C. Charpin-kadouch, H. Dumon, and D. Charpin, Non allergy pathology and domestic mould exposition (in french) Revue Frana¸iseFrana¸ise d'Allergologie, pp.439-445, 2011.

G. Reboux, A. Bellanger, S. Roussel, F. Grenouillet, and L. Millon, Moisissures et habitat??: risques pour la sant?? et esp??ces impliqu??es, Revue des Maladies Respiratoires, vol.27, issue.2, pp.169-179, 2010.
DOI : 10.1016/j.rmr.2009.09.003

E. Vereecken and S. Roels, Review of mould prediction models and their influence on mould risk evaluation, Building and Environment, vol.51, 2011.
DOI : 10.1016/j.buildenv.2011.11.003

G. H. Santos, N. Mendes, and P. C. Philippi, A building corner model for hygrothermal performance and mould growth risk analyses, International Journal of Heat and Mass Transfer, vol.52, issue.21-22, pp.52-73, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2009.05.026

U. Angst, B. Elsener, C. K. Larsen, and Ø. Vennesland, Critical chloride content in reinforced concrete ??? A review, Cement and Concrete Research, vol.39, issue.12, pp.1122-1138, 2009.
DOI : 10.1016/j.cemconres.2009.08.006

S. L. Zelinka, D. Derome, and S. V. Glass, Combining hygrothermal and corrosion models to predict corrosion of metal fasteners embedded in wood, Building and Environment, vol.46, issue.10, pp.2060-2068, 2011.
DOI : 10.1016/j.buildenv.2011.04.017

J. K. Dennis, C. Zou, and N. R. Short, Corrosion behaviour of zinc and zinc alloy coated steel in preservative treated timber, Transactions of the Institute of Metal Finishing, vol.73, pp.96-101, 1995.

J. A. Orosa and E. J. Garcia-bustelo, Ashrae standard application in humib climate ambiances, European Journal of Scientific Research, pp.128-139, 2009.

J. L. Hensen, Literature review on thermal comfort in transient conditions, Building and Environment, vol.25, issue.4, pp.309-316, 1990.
DOI : 10.1016/0360-1323(90)90004-B

N. Djongyang, R. Tchinda, and D. Njomo, Thermal comfort: A review paper, Renewable and Sustainable Energy Reviews, vol.14, issue.9, pp.2626-2640, 2010.
DOI : 10.1016/j.rser.2010.07.040

P. O. Fanger, FUNDAMENTALS OF THERMAL COMFORT, Advances In Solar Energy Technology, pp.3056-3061, 1988.
DOI : 10.1016/B978-0-08-034315-0.50562-0

B. Moujalled, Numerical modeling of thermal comfort in natural ventilated buildings (in French), Institut des Sicences appliquées de yon, 2007.

R. De-dear and G. S. Brager, Developing an adaptive model of thermal comfort and preference, ASHRAE Transactions, vol.4, 1998.

G. S. Brager and R. J. De-dear, Thermal adaptation in the built environment: a literature review, Energy and Buildings, vol.27, issue.1, pp.83-96, 1998.
DOI : 10.1016/S0378-7788(97)00053-4

F. Richieri, Development and parametric analysis of ambiant active components (in French), 2008.

A. V. Baughman and E. A. Arens, Indoor humidity and human health -part i : Literature reviex of health effects of humidity-influenced indoor pollutants, ASHRAE transactions : Research, vol.102, 1996.

P. Wolkoff, K. K. Søren, and . Kj?e, The dichotomy of relative humidity on indoor air quality, Environment International, vol.33, issue.6, pp.850-857, 2007.
DOI : 10.1016/j.envint.2007.04.004

L. Hersoug, Viruses as the causative agent related to 'dampness' and the missing link between allergen exposure and onset of allergic disease, Indoor Air, vol.88, issue.5, pp.363-366
DOI : 10.1007/BF01650651

P. Wolkoff, Indoor air pollutants in office environments: Assessment of comfort, health, and performance, International Journal of Hygiene and Environmental Health, vol.216, issue.4
DOI : 10.1016/j.ijheh.2012.08.001

A. P. Jones, Indoor air quality and health, Atmospheric Environment, vol.33, issue.28, pp.4535-4564, 1999.
DOI : 10.1016/S1352-2310(99)00272-1

A. V. Arundel, E. M. Sterling, J. H. Biggin, and T. D. Sterling, Indirect health effects of relative humidity in indoor environments, Environmental Health Perspectives, vol.65, pp.351-361, 1986.

H. M. Kunzel and K. Kiessl, Calculation of heat and moisture transfer in exposed building components, International Journal of Heat and Mass Transfer, vol.40, issue.1, pp.159-167, 1996.
DOI : 10.1016/S0017-9310(96)00084-1

F. Rouquerol, J. Rouquerol, and K. Sing, Asorption by powders and porous solids, 1990.

C. Hagentoft, A. Sasic, K. , and A. Adl-zarrabi, Assessment Method of Numerical Prediction Models for Combined Heat, Air and Moisture Transfer in Building Components: Benchmarks for One-dimensional Cases, Journal of Building Physics, vol.27, issue.4, pp.327-52, 2004.
DOI : 10.1177/1097196304042436

Q. Li, J. Rao, and P. Fazio, Development of HAM tool for building envelope analysis, Building and Environment, vol.44, issue.5, pp.1065-1073, 2009.
DOI : 10.1016/j.buildenv.2008.07.017

M. Qin, R. Belarbi, A. Aït-mokhtar, and L. Nilsson, Coupled heat and moisture transfer in multi-layer building materials, Construction and Building Materials, vol.23, issue.2, pp.967-975, 2009.
DOI : 10.1016/j.conbuildmat.2008.05.015

URL : https://hal.archives-ouvertes.fr/hal-00384166

H. Janssen, B. Blocken, and J. Carmeliet, Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation, International Journal of Heat and Mass Transfer, vol.50, issue.5-6, pp.5-61128, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2006.06.048

M. Woloszyn, Modelisation hygro-thermo-aeeraulique des batiments multizones : proposition d'une strateegie de resolution du systeme couple, 1999.

S. Rouchier, M. Woloszyn, G. Foray, and J. Roux, Influence of concrete fracture on the rain infiltration and thermal performance of building facades, International Journal of Heat and Mass Transfer, vol.61, pp.340-352, 2013.
DOI : 10.1016/j.ijheatmasstransfer.2013.02.013

URL : https://hal.archives-ouvertes.fr/hal-00798374

A. Trabelsi, Etudes numérique et expérimentale des transferts hygrothermiques dans les matériaux poreux de construction, 2010.

G. Graham, M. Craig, and G. Jiansong, The selection of appropriate flow potentials for moisture transport models, In Building Simulation, 1997.

C. Rode, Moisture buffering of building materials, 2005.

T. Duforestel and P. Dalicieux, A model of hygtroscopic buffer to simulate the indoor air humidity behaviour in transient conditions, Proceedings, pp.791-797, 1994.

H. J. Moon, Assessing mold risks in buildings under uncertainty, 2005.

S. Tasca-guernouti, Méthode d'analyse du comportement thermo-aéraulique des bâtiments pour la construction de modèles zonaux adaptatifs, 2008.

H. Bouia, Modélisation simplifiée d'écoulements de convection mixte interne : application aux échanges thermo-aérauliques dans les locaux, 1993.

E. Wurtz, Modélisation tridimensionnelle des transferts thermiques et aérauliques dans le bâtiment en environnement orienté objet, Ecole Nationale des Ponts et Chaussées, 1995.

M. Musy, Génération automatique de modèles zonaux pour l'étude du comportement thermo-aéraulique des bâtiments, 1999.

J. Officiel-de-la-république-française, TH-b-CE, 2012, fascicule TH-u matériaux, arrêté du, pp.2011-2016, 2011.

J. L. Hensen, Modelling coupled heat and air flow : pingpong vs onions, pp.253-262

O. and K. Amissah, Indoor air Quality -combining air humidity with construction moisture . phdthesis, 2005.

I. Beausoleil-morrison, M. Kummert, F. Macdonald, R. Jost, T. Mcdowell et al., Demonstration of the new ESP-r and TRNSYS co-simulator for modelling solar buildings, Energy Procedia, vol.30, issue.0, pp.505-514, 2012.
DOI : 10.1016/j.egypro.2012.11.060

A. Wills, C. A. Cruickshank, and I. Beausoleil-morrison, Application of the ESP-r/TRNSYS Co-Simulator to Study Solar Heating with a Single-House Scale Seasonal Storage, Energy Procedia, vol.30, issue.0, pp.715-722, 2012.
DOI : 10.1016/j.egypro.2012.11.081

F. Tariku, K. Kumaran, and P. Fazio, Transient model for coupled heat, air and moisture transfer through multilayered porous media, International Journal of Heat and Mass Transfer, vol.53, issue.15-16, pp.15-163035, 2010.
DOI : 10.1016/j.ijheatmasstransfer.2010.03.024

H. Steeman, M. Van-belleghem, A. Janssens, and M. De-paepe, Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage, Building and Environment, vol.44, issue.10, pp.2176-2184, 2009.
DOI : 10.1016/j.buildenv.2009.03.016

R. M. Barbosa and N. Mendes, Combined simulation of central HVAC systems with a whole-building hygrothermal model, Energy and Buildings, vol.40, issue.3, pp.276-288, 2008.
DOI : 10.1016/j.enbuild.2007.02.022

G. H. Santos and N. Mendes, Heat, air and moisture transfer through hollow porous blocks, International Journal of Heat and Mass Transfer, vol.52, issue.9-10, pp.9-102390, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2008.11.003

H. Janssen, Simulation efficiency and accuracy of different moisture transfer potentials, Journal of Building Performance Simulation, vol.9, issue.11, pp.379-389, 2014.
DOI : 10.1007/s12273-008-8106-z

O. Vololonirina, M. Coutand, and B. Perrin, Characterization of hygrothermal properties of wood-based products ??? Impact of moisture content and temperature, Construction and Building Materials, vol.63, issue.0, pp.223-233, 2014.
DOI : 10.1016/j.conbuildmat.2014.04.014

Y. A. Oumeziane, Evaluation des performances hygrothermiques d'une paroi par simulation numérique : application aux parois en béton de chanvre, 2013.

Y. A. Ouméziane, M. Bart, S. Moissette, C. Lanos, S. Prétot et al., Hygrothermal behaviour of a hemp concrete wall : influence of sorption modelling, 9th Nordic Symposium on building Physics, 2011.

C. R. Pedersen, Prediction of moisture transfer in building constructions, Building and Environment, vol.27, issue.3, pp.387-397, 1992.
DOI : 10.1016/0360-1323(92)90038-Q

J. Carmeliet, M. H. Wit, and H. Janssen, Hysteresis and moisture buffering of wood, Proceedings of the 7th Symposium on Building Physics in the Nordic Countries, pp.55-62, 2005.

J. Kwiatkowski, M. Woloszyn, and J. Roux, Modelling of hysteresis influence on mass transfer in building materials, Building and Environment, vol.44, issue.3, pp.633-642
DOI : 10.1016/j.buildenv.2008.05.006

P. Crausse, J. Laurent, and B. Perrin, Influence des ph??nom??nes d'hyst??r??sis sur les propri??t??s hydriques de mat??riaux poreux, Revue G??n??rale de Thermique, vol.35, issue.410, pp.95-106, 1996.
DOI : 10.1016/S0035-3159(96)80002-X

H. Janssen, Thermal diffusion of water vapour in porous materials: Fact or fiction?, International Journal of Heat and Mass Transfer, vol.54, issue.7-8, pp.1548-1562
DOI : 10.1016/j.ijheatmasstransfer.2010.11.034

B. Delcroix, M. Kummert, A. Daoud, and M. Miller, Conduction transfer functions in TRNSYS multizone building model : current implementation, limitations and possible improvements, 2012.

A. Sasic-kalagasidis, P. Weitzmann, T. R. Nielsen, R. Peuhkuri, C. Hagentoft et al., The International Building Physics Toolbox in Simulink, Energy and Buildings, vol.39, issue.6, pp.665-674, 2007.
DOI : 10.1016/j.enbuild.2006.10.007

A. D. Tran-le, C. Maalouf, .. H. Mendonça, E. Mai, and . Wurtz, Study of moisture transfer in a double-layered wall with imperfect thermal and hydraulic contact resistances, Journal of Building Performance Simulation, vol.112, issue.4, pp.251-266, 2009.
DOI : 10.1016/0360-1323(94)00035-Q

A. Piot, C. Abele, M. Woloszyn, and J. Brau, Numerical simulation aided design of an experimental protocol, Proceedings of the 8th Symposium on Building Physics in the Nordic Countries, 2008.

M. Labat, Chaleur -Humidite -Air dans les maisons à ossature bois : Experimentation et modelisation, 2012.
URL : https://hal.archives-ouvertes.fr/tel-00790809

G. H. Santos and N. Mendes, Simultaneous heat and moisture transfer in soils combined with building simulation, Energy and Buildings, vol.38, issue.4, pp.303-314, 2006.
DOI : 10.1016/j.enbuild.2005.06.011

F. Tariku, K. Kumaran, and P. Fazio, Determination of indoor humidity profile using a whole-building hygrothermal model, Building Simulation, vol.108, issue.2, pp.61-78, 2011.
DOI : 10.1007/s12273-011-0031-x

M. Steeman, A. Janssens, H. J. Steeman, M. Van-belleghem, and M. De-paepe, On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model, Building and Environment, vol.45, issue.4, pp.865-877, 2010.
DOI : 10.1016/j.buildenv.2009.09.006

J. Clarke, Moisture flow modelling within the ESP-r integrated building performance simulation system, Journal of Building Performance Simulation, vol.44, issue.7, pp.385-399, 2013.
DOI : 10.1080/19401493.2013.777117

A. Nakhi, Adaptative construction modelling within whole building dynamic simulation, 1995.

C. Spitz, M. Woloszyn, C. Buhe, and M. Labat, Simulating combined heat and moisture transfer with EnergyPlus : an uncertainty study an comparison with experimental data, Building Simulation 2013, proceedings International Building Performance Simulation Association (IBPSA), 2013.

A. Holm, Predicting indoor temperature and humidity conditions including hygrothermal interactions with the building envelope, American Society of Heating, Refrigerating and Air Conditioning Engineers. Transactions, pp.820-826, 2004.

H. Hens and J. Carmeliet, Performance Prediction for Masonry Walls with EIFS Using Calculation Procedures and Laboratory Testing, Journal of Building Physics, vol.25, issue.3, pp.167-187, 2002.
DOI : 10.1177/0075424202025003141

A. Erriguible, P. Bernada, F. Couture, and M. Roques, Simulation of Convective Drying of a Porous Medium with Boundary Conditions Provided by CFD, Chemical Engineering Research and Design, vol.84, issue.2, pp.113-123, 2006.
DOI : 10.1205/cherd.05047

L. H. Mortensen, M. Woloszyn, C. Rode, and R. Peuhkuri, Investigation of Microclimate by CFD Modeling of Moisture Interactions between Air and Constructions, Journal of Building Physics, vol.30, issue.4, pp.279-315, 2007.
DOI : 10.1177/1744259106075233

URL : https://hal.archives-ouvertes.fr/hal-00350781

M. Van-belleghem, M. Steeman, A. Willockx, A. Janssens, and M. De-paepe, Benchmark experiments for moisture transfer modelling in air and porous materials, Building and Environment, vol.46, issue.4, pp.884-898
DOI : 10.1016/j.buildenv.2010.10.018

A. W. Van-schijndel, Modeling and solving building physics problems with FemLab, Building and Environment, vol.38, issue.2, pp.319-327
DOI : 10.1016/S0360-1323(02)00069-0

J. Berger, S. Tasca-guernouti, M. Woloszyn, and C. Buhe, Mould growth damages due to moisture : comparing 1d and 2d heat and moisture models, Building Siumlation International Conference 2013, 2013.

A. Cornick, S. Maref, P. Mukhopadhyaya, A. Dalgliesh, S. Cornick et al., Hygrothermal Performance of Building Envelopes : Uses for 2D and 1D simulation

. Dassault-system and . Dymola, http://www.3ds.com/products-services/catia/ capabilities/systems-engineering/modelica-systems-simulation/dymola, 2014.

J. Clarke, C. Johnstone, N. Kelly, R. Mclean, J. Anderson et al., A technique for the prediction of the conditions leading to mould growth in buildings, Building and Environment, vol.34, issue.4, pp.515-521, 1999.
DOI : 10.1016/S0360-1323(98)00023-7

G. P. Mitalas, Comments on the Z-transfer Function Method for Calculating Heat Transfer in Buildings, National Research Council, Division of Building Research, 1978.

M. Qin, R. Belarbi, A. Aït-mokhtar, and A. Seigneurin, An analytical method to calculate the coupled heat and moisture transfer in building materials, International Communications in Heat and Mass Transfer, vol.33, issue.1, pp.39-48, 2006.
DOI : 10.1016/j.icheatmasstransfer.2005.08.001

URL : https://hal.archives-ouvertes.fr/hal-00312282

J. W. Ribeiro, R. M. Cotta, and M. D. Mikhailov, Integral transform solution of Luikov's equations for heat and mass transfer in capillary porous media, International Journal of Heat and Mass Transfer, vol.36, issue.18, pp.4467-4475, 1993.
DOI : 10.1016/0017-9310(93)90131-O

C. Win-jin and C. Weng, An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture, Applied Mathematical Modelling, vol.21, issue.11, pp.721-734, 1997.
DOI : 10.1016/S0307-904X(97)00100-5

K. Abahri, R. Belarbi, and A. Trabelsi, Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials, Building and Environment, vol.46, issue.7, pp.1354-1360, 2011.
DOI : 10.1016/j.buildenv.2010.12.020

URL : https://hal.archives-ouvertes.fr/hal-00614273

D. Petit, Réduction de modèles de connaissance et identification de modèles d'ordre réduit : application aux processus de diffusion thermique. phdthesis, 1991.

A. Oulefki, Réduction de modèles thermiques par amalgame modal, Ecole Nationale des Ponts et Chaussées, 1993.
DOI : 10.1051/jp3:1993133

F. Ollivier and F. Déqué, Effect of 2d modelling of thermal bridges on the energy performance of buildings : Numerical application on the matisse apartment, Energy and Buildings, issue.6, pp.583-587, 2001.

A. Mokhtari, Etude du comportement thermique des batiments en contact avec le sol par l'analyse modale, 1988.

R. Morlot and J. Roux, Contribution au développement de méthodes de réduction de systèmes thermiques complexes -application aux planchers rayonnants electriques posés sur terre-plein = contribution to the development of methods of reduction for thermal complex systems, applied a slab-on-ground heating floor in residential buildings, 1999.

E. Palomo-del-barrio, Roof components models simplification via statistical linearisation and model reduction techniques, Energy and Buildings, vol.29, issue.3, pp.259-281, 1999.
DOI : 10.1016/S0378-7788(98)00061-9

E. Barrio, Solving high dimension thermal problems : reduction method (in French) Editions Universitaires Europeennes, 2011.

E. Kim, Development of numerical models of vertical ground heat exchangers and experimental verification : domain decomposition and state model reduction approach, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00684138

N. Verdon, A low-order dynamical system based on a APR-POD approach for studying turbulent flow particles interaction (in French), 2007.

E. Liberge and A. Hamdouni, Reduced order modelling method via proper orthogonal decomposition (POD) for flow around an oscillating cylinder, Journal of Fluids and Structures, vol.26, issue.2, pp.292-311, 2010.
DOI : 10.1016/j.jfluidstructs.2009.10.006

URL : https://hal.archives-ouvertes.fr/hal-00533622

M. Girault and D. Petit, Identification methods in nonlinear heat conduction. Part I: Model reduction, International Journal of Heat and Mass Transfer, vol.48, issue.1, pp.105-118, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.06.032

URL : https://hal.archives-ouvertes.fr/hal-00017512

M. Girault, S. Derouineau, J. Salat, and D. Petit, Model reduction for natural convection by identification method (in French) Comptes Rendus Mecanique, pp.811-818, 2004.

J. Dauvergne and E. Palomo-del-barrio, Toward a simulation-free pod approach for low-dimensional description of phase-change problems, International Journal of Thermal Sciences, vol.49, issue.8, pp.491369-1382, 2010.
DOI : 10.1016/j.ijthermalsci.2010.02.006

P. O. Laffay, O. Quemener, and A. Neveu, Developing a method for coupling branch modal models, International Journal of Thermal Sciences, vol.48, issue.6, pp.1060-1067, 2009.
DOI : 10.1016/j.ijthermalsci.2008.11.002

URL : https://hal.archives-ouvertes.fr/hal-01180013

A. Neveu and K. Khoury, Reduction of a nonlinear thermal model by the branch modes : test case on heating cable, 2000.

A. Dumon, C. Allery, and A. Ammar, Proper general decomposition (PGD) for the resolution of Navier???Stokes equations, Journal of Computational Physics, vol.230, issue.4, pp.1387-1407, 2011.
DOI : 10.1016/j.jcp.2010.11.010

URL : https://hal.archives-ouvertes.fr/hal-01061383

M. S. Aghighi, A. Ammar, C. Metivier, M. Normandin, and F. Chinesta, Non-incremental transient solution of the Rayleigh???B??nard convection model by using the PGD, Journal of Non-Newtonian Fluid Mechanics, vol.200, 2013.
DOI : 10.1016/j.jnnfm.2012.11.007

F. Chinesta, A. Ammar, A. Leygue, and R. Keunings, An overview of the proper generalized decomposition with applications in computational rheology, Journal of Non-Newtonian Fluid Mechanics, vol.166, issue.11, pp.578-592, 2011.
DOI : 10.1016/j.jnnfm.2010.12.012

URL : https://hal.archives-ouvertes.fr/hal-01005239

P. Kerfriden, P. Gosselet, S. Adhikari, and S. P. Bordas, Bridging proper orthogonal decomposition methods and augmented Newton???Krylov algorithms: An adaptive model order reduction for highly nonlinear mechanical problems, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.5-8, pp.5-8850, 2011.
DOI : 10.1016/j.cma.2010.10.009

URL : https://hal.archives-ouvertes.fr/hal-00537900

C. Allery, A. Hamdouni, D. Ryckelynck, and N. Verdon, A priori reduction method for solving the two-dimensional Burgers??? equations, Applied Mathematics and Computation, vol.217, issue.15, pp.6671-6679, 2011.
DOI : 10.1016/j.amc.2011.01.065

URL : https://hal.archives-ouvertes.fr/hal-00585095

E. Liberge, Modèles réduits obtenus par la méthode de POD-Galerkin pour les problèmes d'interaction fluide structure, 2008.

K. Karhunen, Über lineare methoden in der wahrscheinlichkeitsrechnung, 1947.

M. Loeve, Probability Theory I, 1977.

Y. C. Liang and C. G. Wu, A note on equivalence of proper orthogonal decomposition methods, pp.1103-1110, 2003.

H. P. Lee and Y. Liang, Proper orthogonal decomposition and its applications -part 1 : Therory, pp.527-544, 2002.

J. L. Lumley, The structure of inhomogeneous turbulent flows, Atmospheric turbulence and radio propagation, pp.166-178, 1967.

G. Berkooz, P. Holmes, and J. L. Lumley, The Proper Orthogonal Decomposition in the Analysis of Turbulent Flows, Annual Review of Fluid Mechanics, vol.25, issue.1, pp.539-575, 1993.
DOI : 10.1146/annurev.fl.25.010193.002543

P. J. Holmes, J. L. Lumley, G. Berkooz, J. C. Mattingly, and R. W. Wittenberg, Lowdimensional models of coherent structures in turbulence, Physics Reports, vol.287, issue.4, 1997.

M. Couplet, Modélisation POD-Galerkine réduite pour le contrôle des écoulements instationnaires, 2005.

C. Allery, C. Béghein, and A. Hamdouni, Applying proper orthogonal decomposition to the computation of particle dispersion in a two-dimensional ventilated cavity, Communications in Nonlinear Science and Numerical Simulation, vol.10, issue.8, pp.907-920, 2005.
DOI : 10.1016/j.cnsns.2004.05.005

URL : https://hal.archives-ouvertes.fr/hal-00312147

C. Allery, Contribution à l'identification des bifurcations et à l'étude des écoulements fluides par des systèmes dynamiques d'ordre faible (P, 2002.

O. Y. Chung and H. M. Park, On the solution of inverse heat transfer problem using the karhunen?loève galerkin method, International Journal of Heat and Mass Transfer, issue.1, pp.127-142, 1999.

W. S. Jung and H. M. Park, The karhunen?loève galerkin method for the inverse natural convection problems, International Journal of Heat and Mass Transfer, issue.1, pp.155-167, 2001.

A. Cholesky, Sur la résolution numérique des systèmes d'équations linéaires, 1910.

P. Ciarlet and J. Lions, Introduction à l'analyse numérique matricielle et à l'optimisation -Dunod. Sciences sup. Dunod, 5ème édition edition, 2007.

J. A. Brandon, Derivation and Application of the Choleski Decomposition for the Positive Semi-definite Matrices used in Structural Dynamics Reanalysis, Modern Practice in Stress and Vibration Analysis, pp.225-233, 1989.
DOI : 10.1016/B978-0-08-037522-9.50029-5

S. Rouchier, H. Janssen, C. Rode, M. Woloszyn, G. Foray et al., Characterization of fracture patterns and hygric properties for moisture flow modelling in cracked concrete, Construction and Building Materials, vol.34, pp.54-62, 2012.
DOI : 10.1016/j.conbuildmat.2012.02.047

URL : https://hal.archives-ouvertes.fr/hal-00795457

P. Ladeveze, On a family of algorithms for structural mechanics (in french) Comptesrendus des séances de l'Académie des sciences. Série 2, Mécanique-physique, chimie, sciences de l'univers, sciences de la terre, pp.41-44, 1985.

F. Chinesta, P. Ladeveze, and E. Cueto, A Short Review on Model Order Reduction Based on Proper Generalized Decomposition, Archives of Computational Methods in Engineering, vol.69, issue.9, pp.395-404, 2011.
DOI : 10.1007/s11831-011-9064-7

URL : https://hal.archives-ouvertes.fr/hal-01004940

F. Chinesta, A. Leygue, F. Bordeu, J. V. Aguado, E. Cueto et al., PGD-Based Computational Vademecum for Efficient Design, Optimization and Control, Archives of Computational Methods in Engineering, vol.51, issue.1, pp.31-59, 2013.
DOI : 10.1007/s11831-013-9080-x

URL : https://hal.archives-ouvertes.fr/hal-01007175

F. Chinesta, A. Ammar, and E. Cueto, Proper generalized decomposition of multiscale models, International Journal for Numerical Methods in Engineering, vol.197, issue.5, pp.1114-1132, 2010.
DOI : 10.1002/nme.2794

URL : https://hal.archives-ouvertes.fr/hal-01007222

L. Champagney, J. Y. Cognard, and P. Ladèveze, Modular analysis of assemblages of three-dimensional structures with unilateral contact conditions, Computers and Structures, vol.73, pp.1-5, 1999.

A. Caignot, P. Ladeveze, and N. D. , Virtual testing for the prediction of damping in joints, Engineering Computations, vol.27, issue.5, 2010.
DOI : 10.1108/02644401011050912

D. Violeau, P. Ladevèze, and G. Lubineau, Micromodel-based simulations for laminated composites, Composites Science and Technology, vol.69, issue.9, 2009.
DOI : 10.1016/j.compscitech.2008.09.041

URL : https://hal.archives-ouvertes.fr/tel-00254379

P. Ladeveze and A. Nouy, On a multiscale computational strategy with time and space homogenization for structural mechanics, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.28-30, 2003.
DOI : 10.1016/S0045-7825(03)00341-4

URL : https://hal.archives-ouvertes.fr/hal-00366648

A. Nouy and P. Ladevèze, Multiscale computational strategy with time and space homogenization : a radial type approximation tecnique for solving micro problems, International Journal of multiscale computational engineer, vol.170, 2004.

E. Pruliere, F. Chinesta, and A. Ammar, On the deterministic solution of multidimensional parametric models using the Proper Generalized Decomposition, Mathematics and Computers in Simulation, vol.81, issue.4, pp.791-810, 2010.
DOI : 10.1016/j.matcom.2010.07.015

URL : https://hal.archives-ouvertes.fr/hal-00704427

A. Ammar, M. Normandin, F. Daim, D. Gonzalez, E. Cueto et al., Non incremental strategies based on separated representations: applications in computational rheology, Communications in Mathematical Sciences, vol.8, issue.3, pp.671-695, 2010.
DOI : 10.4310/CMS.2010.v8.n3.a4

URL : https://hal.archives-ouvertes.fr/hal-01007108

A. Ammar, B. Mokdad, F. Chinesta, and R. Keunings, A new family of solvers for some classes of multidimensional partial differential equations encountered in kinetic theory modelling of complex fluids, Journal of Non-Newtonian Fluid Mechanics, vol.144, issue.2-3, pp.2-398, 2007.
DOI : 10.1016/j.jnnfm.2007.03.009

D. Neron and P. Ladeveze, Proper Generalized Decomposition for Multiscale and??Multiphysics Problems, Archives of Computational Methods in Engineering, vol.193, issue.1???4, pp.351-372, 2010.
DOI : 10.1007/s11831-010-9053-2

A. Ammar and F. Chinesta, Circumventing Curse of Dimensionality in the Solution of Highly Multidimensional Models Encountered in Quantum Mechanics Using Meshfree Finite Sums Decomposition, Meshfree Methods for Partial Differential Equations IV, number 65 in Lecture Notes in Computational Science and Engineering, pp.1-17, 2008.
DOI : 10.1007/978-3-540-79994-8_1

URL : https://hal.archives-ouvertes.fr/hal-01007483

A. Ammar, F. Chinesta, and E. Cueto, Coupling finite elements and separated representation, International Journal of Multiscale Computational Engineering, 2011.

H. Lamari, A. Ammar, A. Leygue, and F. Chinesta, On the solution of the multidimensional Langer's equation using the proper generalized decomposition method for modeling phase transitions, Modelling and Simulation in Materials Science and Engineering, vol.20, issue.1, p.15007, 2012.
DOI : 10.1088/0965-0393/20/1/015007

A. Ammar, M. Normandin, and F. Chinesta, Solving parametric complex fluids models in rheometric flows Journal of non-Neaxtonian Fluid mechanics, pp.23-24, 2010.

A. Nouy, A generalized spectral decomposition technique to solve a class of linear stochastic partial differential equations, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.45-48, 2007.
DOI : 10.1016/j.cma.2007.05.016

URL : https://hal.archives-ouvertes.fr/hal-00366619

A. Nouy, A generalized spectral decomposition method for solving stochastif finite element equations : invariant subspace problem and dedicated algorithms, Computation Methods Applied Mechanical Engineer, vol.197, 2008.

A. Nouy, L. Maître, and O. , Generalized spectral decomposition for stochastic nonlinear problems, Journal of Computational Physics, vol.228, issue.1, 2007.
DOI : 10.1016/j.jcp.2008.09.010

A. Nouy and O. P. Le-maitre, Generalized spectral decomposition for stochastic nonlinear problems, Journal of Computational Physics, vol.228, issue.1, pp.202-235, 2009.
DOI : 10.1016/j.jcp.2008.09.010

S. Niroomandi, I. Alfaro, E. Cueto, and F. Chinesta, Accounting for large deformations in real-time simulations of soft tissues based on reduced-order models, Computer Methods and Programs in Biomedicine, vol.105, issue.1, pp.1-12, 2012.
DOI : 10.1016/j.cmpb.2010.06.012

URL : https://hal.archives-ouvertes.fr/hal-01004972

S. Niroomandi, I. Alfaro, D. González, E. Cueto, and F. Chinesta, Model order reduction in hyperelasticity: a proper generalized decomposition approach, International Journal for Numerical Methods in Engineering, vol.199, issue.23-24, pp.129-149, 2013.
DOI : 10.1002/nme.4531

URL : https://hal.archives-ouvertes.fr/hal-01007060

S. Niroomandi, F. Bordeu, D. Alfaro, A. Gonzalez, E. Leygue et al., Real-Time Simulation for Virtual Surgery in a PGD Framework, Volume 1: Advanced Computational Mechanics; Advanced Simulation-Based Engineering Sciences; Virtual and Augmented Reality; Applied Solid Mechanics and Material Processing; Dynamical Systems and Control, pp.247-251, 2012.
DOI : 10.1115/ESDA2012-82541

A. Ammar, F. Chinesta, and A. Falco, On the Convergence of a Greedy Rank-One Update Algorithm for??a??Class of Linear Systems, Archives of Computational Methods in Engineering, vol.21, issue.4, 2010.
DOI : 10.1007/s11831-010-9048-z

URL : https://hal.archives-ouvertes.fr/hal-01007145

W. B. Brett and G. K. Tamara, Efficient MATLAB computations with sparse and factored tensors, pp.205-231

J. Grunewald and A. Nicolai, CHAMPS-BES program for coupled heat, air, moisture and pollutant simulation in building envelope systems, 2006.

F. Chinesta, R. Keunings, and A. Leygue, The Proper Generalized Decomposition for Advanced Numerical Simulations : A Primer, 2013.
DOI : 10.1007/978-3-319-02865-1

A. Piot, Hygrothermique du bâtiment : experimentation sur une maison à ossature bois en conditions climatiques naturelles et modelisation numerique, 2009.

D. González, F. Masson, F. Poulhaon, A. Leygue, E. Cueto et al., Proper Generalized Decomposition based dynamic data driven inverse identification, Mathematics and Computers in Simulation, vol.82, issue.9, pp.1677-1695, 2012.
DOI : 10.1016/j.matcom.2012.04.001

J. Lions, Contrôle optimal de systèmes gouvernés par des équations aux dérivées partielles . Dunod, 1968.

N. Hansen, The CMA Evolution Strategy: A Comparing Review, Towards a New Evolutionary Computation, number 192 in Studies in Fuzziness and Soft Computing, pp.75-102
DOI : 10.1007/3-540-32494-1_4

A. Nassiopoulos and F. Bourquin, On-site building walls characterization. Numerical Heat Transfer Part A -Applications, pp.179-200, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00915784

L. Gosselin, M. Tye-gingras, and F. Mathieu-potvin, Review of utilization of genetic algorithms in heat transfer problems, International Journal of Heat and Mass Transfer, vol.52, issue.9-10, pp.2169-2188
DOI : 10.1016/j.ijheatmasstransfer.2008.11.015

S. Rouchier and M. Woloszyn, Identification des propriétés hygrothermiques des matériaux par stratégie d'évolution CMA, Conférence Francophone de l'International Building Performance Simulation Association -France Arras 2014. IBPSA france, pp.2014-2020

J. Brouns, A. Nassiopoulos, F. Bourquin, and K. Limam, State-parameter identification for accurate building energy audits, Building Simulation 2013 conference. IBPSA world, pp.2013-2014
URL : https://hal.archives-ouvertes.fr/hal-00913767

T. Bednar and C. Hagentoft, Analytical solution for moisture buffering effect validation exercises for simulation tools, Chalmers Publication Library (CPL), 2005. Chalmers Publication Library (CPL). Forskningspublikationer från Chalmers Tekniska Högskola

A. Faghri, Y. Zhang, and J. R. Howell, Advanced Heat and Mass Transfer, 2010.

F. Miranville, Contribution à l'Etude des Parois Complexes en Physique du Bâtiment : Modelisation, Expérimentation et Validation Expérimentale de Complexes de Toitures incluant des Produits Minces Réfléchissants en climat tropical humide. phdthesis, pp.2002-2014

J. Barrand and J. Sacadura, Initiation aux transferts thermiques, Tec & Doc, pp.1993-1994

C. Hagentoft, Introduction to Building Physics, Lightning Source Incorporated, pp.2001-2002

J. V. Aguado, F. Chinesta, A. Leygue, A. Cueto, and A. Huert, DEIM-based PGD for parametric non linear model order reduction, Adaptative Modeling and simulation 2013, pp.29-37

P. Joyot, N. Bur, F. Chinesta, and P. Villon, La méthode PGD appliquée à l'équation de la chaleur non-linéaire : vers une formulation performante, Actes CSMA 2013. CA CSMA, pp.2013-2018

M. Beringhier, A. Leygue, F. Chinesta, and J. Grandinier, Couplage MAN-PGD pour la réolution de problèmes transitoires non-linéaires, Actes CSMA 2013. CA CSMA, pp.2013-2018

T. L. Nguyen, La Décomposition propre généralisée pour la résolution de problèmes multi-physiques transitoires couplés dédiés à la mécanique des matériaux maillage adaptatif et couplage avec la MAN, 2012.

S. Rouchier, Evaluation des performances hygrothermiques des matériaux de construction endommagés. phdthesis, pp.2012-2022

. Thèmes-d-'études, Suivi et évaluation de la performance énergétique de bâtiment, instrumentation , suivi de chantier, mesure d'étanchéité à l'air, diagnostique infra-rouge, contrôle du respect des standards réglementaires et de la qualité de mise en oeuvre. Encadrement, formation et management d'une équipe de 6 personnes, 2008.

J. Berger, M. Chhay, S. Guernouti, and M. Woloszyn, Réalisation d'étude sur la ventilation et le refroidissement de bâtiments pour des projets de construction, dimensionnement des équipements et suivi des installations. Publications Revues internationales avec comité de lecture Proper Generalised Decomposition for solving coupled heat and moisture transfers, Journal of Building Performance Simulation, p.10, 1080.

. Conférences1, . Berger, S. Julien, S. Rouchier, M. Tasca-guernouti et al., On the integration of hygrothermal bridges into whole building and HAM modeling, IBPSA 2013, Building Siumlation International Conference 2013, 2013.

J. Berger, S. Tasca-guernouti, M. Woloszyn, C. B. Berger, S. Julien et al., L'humidité dans les Bâtiments: Pathologies et paramètres gouvernants In: Chambery, France: AUGC-IBPSA 2012, National French conference Mould growth damages due to moisture: comparing 1D and 2D heat and moisture models, Building Siumlation International Conference 2013, p.2013, 2012.

J. Berger, S. Tasca-guernouti, M. Woloszyn, M. Chhay-julien, and S. Guernouti, Towards efficient numerical modelling of hygrothermal transfers using Proper Generalised Decomposition Monika Woloszyn, and Catherine Buhe. L'humidité dans les Bâtiments: Pathologies et paramètres gouvernants, 10th Nordic Symposium on Building Physics, 2014.

J. Berger-Étudiant-en-doctorat, Centre d'Etude et d'expertise sur les Risques, l'Environnement, la Mobilité et l'Aménagement, DTer Ouest Mots-clés Transferts hygrothermiques dans les matériaux poreux, Transferts multizones, Simulation globale bâtiment, Pathologies liées à l'humidité. Problèmes non-linéaires de diffusion, Problèmes paramétriques, Problèmes multi-dimensionnels, Problèmes inverses, Techniques de réduction de modèle Proper Generalised Decomposition (PGD) Diplômes Ecole Nationale des Travaux Publics de l'Etat, Vaulx-en-Velin, Spécialisation: Énergétique du bâtiment, Formations complémentaires 2014 PhD school, PPD=0, Pontifícia Universidade Católica do Paraná (PUCPR), Curitiba , Brésil. Energy and Moisture in Buildings: from the Microstructure of Porous Materials to the Building Energy Efficiency 2013 PhD school. Tools and Data for energy-optimized Buildings, Neighborhoods, Residential Areas and Cities 2012 PhD school, 2005.

C. Brésil, Collaboration pour la réalisation de co-simulation entre le modèle numérique développé dans le cadre de mes travaux de thèse et le modèle du laboratoire LST-PUCPR Domus, 2011.