. Bissey, Int??gration de la g??om??trie d'outil dans la pr??diction des efforts de coupe en fraisage de mat??riaux durs, M??canique & Industries, vol.6, issue.4, pp.391-398, 2005.
DOI : 10.1051/meca:2005046

H. Blok, Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions, Proc. Inst. Mech. Eng, vol.2, pp.222-235, 1937.

[. Saï, Influence of machining by finishing milling on surface characteristics, International Journal of Machine Tools and Manufacture, issue.3, pp.41443-450, 2001.

. Braham-bouchnak and T. Braham-bouchnak, Étude du comportement en sollicitations extrêmes et de l'usinabilité d'un nouvel alliage de titane aéronautique : le Ti555-3, Thèse de doctorat, Arts et Métiers ParisTech, 2010.

. Brandão, Experimental and theoretical study of workpiece temperature when end milling hardened steels using (TiAl)N-coated and PcBN-tipped tools, Journal of Materials Processing Technology, vol.199, issue.1-3, pp.234-244, 2008.
DOI : 10.1016/j.jmatprotec.2007.07.049

. Ceretti, . Lodini, M. Ceretti, L. Et, and A. , Evaluation des contraintes résiduelles à partir de la mesure des microdédormations dans les matériaux polycristallins, p.32, 1996.

[. Lima and I. , Tolérance aux défauts initiaux et effets de surface : Dimensionnement à la fatigue des pièces de fonderie, Thèse de doctorat, 2000.

E. Charkaluk, Dimensionnement des structures à la fatigue thermomécanique, 1999.

B. Crossland, Effect of large hydrostatic pressures on torsional fatigue strength of an alloy steel, Proc. Int. Conf. on Fatigue of Metals, pp.138-149, 1956.

. Darwish, . Davies, S. Darwish, D. Et, and R. , Investigation of the heat flow through bonded and brazed metal cutting tools, International Journal of Machine Tools and Manufacture, vol.29, issue.2, pp.229-237, 1989.
DOI : 10.1016/0890-6955(89)90034-5

J. P. Davim and . Éditeur, Surface Integrity in Machining, 2010.
DOI : 10.1007/978-1-84882-874-2

. Denkena, Milling induced residual stresses in structural parts out of forged aluminium alloys, Proceedings of the 6th International Conference on High Speed Machining, 2007.
DOI : 10.1504/IJMMM.2008.023717

. Desmorat, Two scale damage model and related numerical issues for thermo-mechanical High Cycle Fatigue, European Journal of Mechanics - A/Solids, vol.26, issue.6, pp.909-935, 2007.
DOI : 10.1016/j.euromechsol.2007.01.002
URL : https://hal.archives-ouvertes.fr/hal-00169928

. Dong, Comprehensive study of parameters for characterizing three-dimensional surface topography I: Some inherent properties of parameter variation, Wear, vol.159, issue.2, pp.161-171, 1992.
DOI : 10.1016/0043-1648(92)90299-N

. Dong, Comprehensive study of parameters for characterising three- dimensional surface topography, Wear, vol.178, issue.1-2, pp.29-43, 1994.
DOI : 10.1016/0043-1648(94)90127-9

. Dong, Comprehensive study of parameters for characterising three-dimensional surface topography, Wear, vol.178, issue.1-2, pp.45-60, 1994.
DOI : 10.1016/0043-1648(94)90128-7

C. Doudard, Détermination rapide des propriétés en fatigue à grand nombre de cycles à partir d'essais d'échauffement, Thèse de doctorat, 2004.

. Dudzinski, A review of developments towards dry and high speed machining of Inconel 718 alloy, International Journal of Machine Tools and Manufacture, vol.44, issue.4, pp.439-456, 2004.
DOI : 10.1016/S0890-6955(03)00159-7

. El-wardany, Surface Integrity of Die Material in High Speed Hard Machining, Part 2: Microhardness Variations and Residual Stresses, Journal of Manufacturing Science and Engineering, vol.122, issue.4, pp.632-641, 2000.
DOI : 10.1115/1.1286557

J. D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, pp.241376-396, 1226.

. Field, . Kahles, M. Field, K. Et, and J. F. , Surface integrity of machined and ground high strength steels, DMIC Report, vol.210, pp.54-77, 1964.

. Fontaine, Modelling of cutting forces in ball-end milling with tool???surface inclination, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.73-84, 2007.
DOI : 10.1016/j.jmatprotec.2007.01.006
URL : https://hal.archives-ouvertes.fr/hal-00261032

. Gaborit, . Desmorat, P. Gaborit, D. Et, and R. , Vers un modèle d'endommagement unifié pour la fatigue à faible et grand nombre de cycles. 21ème Congrès Français de Mécanique, 2013.

B. Griffiths, Manufacturing Surface Technology : Surface Integrity and Functional Performance, 2001.

B. Guichard, Contraintes résiduelles induites par fraisage avec outil hémisphérique, pp.LMT-Cachan, 2012.

. Jeelani, . Musial, S. Jeelani, M. Et, and M. , Effect of cutting speed and tool rake angle on the fatigue life of 2024-T351 aluminium alloy, International Journal of Fatigue, vol.6, issue.3, pp.169-172, 1984.
DOI : 10.1016/0142-1123(84)90034-3

J. Cook, G. R. Johnson, C. Et, and W. H. , A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, pp.541-547, 1983.

. Kalvoda, . Hwang, T. Kalvoda, H. Et, and Y. , Impact of various ball cutter tool positions on the surface integrity of low carbon steel, Materials & Design, vol.30, issue.9, pp.3360-3366, 2009.
DOI : 10.1016/j.matdes.2009.03.039

. Komanduri, . Hou, R. Komanduri, H. Et, and Z. B. , Thermal modeling of the metal cutting process ??? Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool???chip interface frictional heat source, International Journal of Mechanical Sciences, vol.43, issue.1, pp.89-107, 2001.
DOI : 10.1016/S0020-7403(99)00105-8

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

J. L. Lebrun, Origine des contraintes résiduelles, méthodes de mesure, 2009.

L. Et-altinta¸saltinta¸s, P. Lee, A. Et, and Y. Altinta¸s, Prediction of ball-end milling forces from orthogonal cutting data, International Journal of Machine Tools and Manufacture, vol.36, issue.9, pp.1059-1072, 1996.

. Lemaitre, . Doghri, J. Lemaitre, D. Et, and I. , Damage 90: a post processor for crack initiation, Computer Methods in Applied Mechanics and Engineering, vol.115, issue.3-4, pp.197-232, 1994.
DOI : 10.1016/0045-7825(94)90060-4

. Lemaitre, A two scale damage concept applied to fatigue, International Journal of Fracture, vol.97, pp.1-4, 1999.

H. P. Lieurade, Rôle de l'usinage sur la tenue en fatigue, 2008.

J. Limido, Étude de l'effet de l'usinage grande vitesse sur la tenue en fatigue de pièces aéronautiques, Thèse de doctorat, 2008.

. Mantle, . Aspinwall, A. L. Mantle, A. Et, and D. K. , Surface integrity of a high speed milled gamma titanium aluminide, Journal of Materials Processing Technology, vol.118, issue.1-3, pp.143-150, 2001.
DOI : 10.1016/S0924-0136(01)00914-1

. Matsumoto, Surface Integrity Generated by Precision Hard Turning, CIRP Annals - Manufacturing Technology, vol.48, issue.1, pp.59-62, 1999.
DOI : 10.1016/S0007-8506(07)63131-X

T. Tech-publ and M. E. Merchant, Mechanics of the metal cutting process I. orthogonal cutting and type 2 chip, Journal of applied physics, vol.16, pp.267-275, 1945.

. Inc, O. Cincinnati, and . Ming, Handbook, Machining Data Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling, Journal of materials processing technology, vol.138, issue.1, pp.468-471, 1980.

A. Mondelin, F. Morel, and T. Palin-luc, Modélisation de l'intégrité des surfaces usinées : Application au cas du tournage de finition de l'acier inoxydable 15-5PH A non-local theory applied to high cycle multiaxial fatigue, Thèse de doctorat Fatigue & Fracture of Engineering Materials & Structures, pp.25649-665, 2002.

. Saoubi, A review of surface integrity in machining and its impact on functional performance and life of machined products, International Journal of Sustainable Manufacturing, vol.1, issue.1/2, pp.203-236, 2008.
DOI : 10.1504/IJSM.2008.019234

M. Et-renz-]-müller, B. Et, R. , and U. , A fast fiber-optic two-color pyrometer for temperature measurements of metallic surfaces with varying emissivities, AIP Conference Proceedings, p.741, 2003.

T. Mura, Micromechanics of defects in solids, 1987.

. Nasr, Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L, International Journal of Machine Tools and Manufacture, vol.47, issue.2, pp.47401-411, 2007.
DOI : 10.1016/j.ijmachtools.2006.03.004

H. Neuber, Theory of Stress Concentration for Shear-Strained Prismatical Bodies With Arbitrary Nonlinear Stress-Strain Law, Journal of Applied Mechanics, vol.28, issue.4, p.544, 1961.
DOI : 10.1115/1.3641780

E. Nf, . Iso, . Nf, and . Iso, Spécification géométrique des produits (GPS) ? États de surface : surfacique ? Partie 2 : termes, pp.25178-25180, 2008.

T. Nguyen-thi and H. Thu, Effet des hétérogénéités microstructurales sur le comportement en fatigue multiaxiale à grand nombre de cycles : application à l'usinage assisté laser, 2008.

. Novovic, The effect of machined topography and integrity on fatigue life, International Journal of Machine Tools and Manufacture, vol.44, issue.2-3, pp.2-3125, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.018

. Noyan, . Cohen, I. C. Noyan, C. Et, and J. B. , Residual Stress : Measurement by Diffraction and Interpretation, 1987.
DOI : 10.1007/978-1-4613-9570-6

. Outeiro, Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel, International Journal of Machine Tools and Manufacture, vol.46, issue.14, pp.1786-1794, 2006.
DOI : 10.1016/j.ijmachtools.2005.11.013

P. L. Oxley, Mechanics of Machining: An Analytical Approach to Assessing Machinability, Journal of Applied Mechanics, vol.57, issue.1, 1989.
DOI : 10.1115/1.2888318

H. Oxley, P. L. Oxley, H. Et, and W. F. , Minimum Work as a Possible Criterion for Determining the Frictional Conditions at the Tool/Chip Interface in Machining, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.282, issue.1310, pp.282565-584, 1310.
DOI : 10.1098/rsta.1976.0064

[. Sullivan, D. Cotterell-]-o-'sullivan, C. Et, and M. , Temperature measurement in single point turning, Journal of Materials Processing Technology, vol.118, pp.1-3301, 2001.

. Palin-luc-et-lasserre, T. Palin-luc, L. Et, and S. , An energy based criterion for high cycle multiaxial fatigue, European Journal of Mechanics - A/Solids, vol.17, issue.2, pp.237-251, 1998.
DOI : 10.1016/S0997-7538(98)80084-3

I. Papadopoulos, A new criterion of fatigue strength for out-of-phase bending and torsion of hard metals, International Journal of Fatigue, vol.16, issue.6, pp.377-384, 1994.
DOI : 10.1016/0142-1123(94)90449-9

. Pellas, Mesure et calcul du seuil de fissuration après surcharge, Recherche aérospatiale, vol.3, pp.191-201, 1977.

. Pessard, The Anisotropic Fatigue Behavior of Forged Steel, Advanced Engineering Materials, vol.74, issue.470, pp.732-735, 2009.
DOI : 10.1002/adem.200900040
URL : https://hal.archives-ouvertes.fr/hal-00805154

R. E. Peterson, Stress Concentration Factors, Journal of Applied Mechanics, vol.42, issue.1, 1974.
DOI : 10.1115/1.3423544

. Pina, Residual stresses and crystallographic texture in hard-chromium electroplated coatings, Surface and Coatings Technology, vol.96, issue.2-3, pp.2-3148, 1997.
DOI : 10.1016/S0257-8972(97)00075-3

. Potdar, . Zehnder, Y. K. Potdar, Z. Et, and A. T. , Measurements and Simulations of Temperature and Deformation Fields in Transient Metal Cutting, Journal of Manufacturing Science and Engineering, vol.125, issue.4, pp.645-655, 2003.
DOI : 10.1115/1.1596571

G. Sines, Behavior of metals under complex static and alternating stresses, WAISMAN, J. L., éditeur : Metal Fatigue, pp.145-169, 1959.

A. Souto-lebel and . Lmt-cachan, Prise en compte de l'intégrité de surface générée en fraisage de finition dans un modèle d'endommagement en fatigue, 2010.

. Souto-lebel, Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life, 1st CIRP Conference on Surface Integrity (CSI), pp.343-348, 2011.
DOI : 10.1016/j.proeng.2011.11.123

D. A. Stephenson, Tool-Work Thermocouple Temperature Measurements???Theory and Implementation Issues, Journal of Engineering for Industry, vol.115, issue.4, pp.432-437, 1993.
DOI : 10.1115/1.2901786

. Sun, . Guo, J. Sun, G. Et, and Y. B. , A comprehensive experimental study on surface integrity by end milling Ti???6Al???4V, Journal of Materials Processing Technology, vol.209, issue.8, pp.4036-4042, 2009.
DOI : 10.1016/j.jmatprotec.2008.09.022

. Suraratchai, Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy, International Journal of Fatigue, vol.30, issue.12, pp.302119-2126, 2008.
DOI : 10.1016/j.ijfatigue.2008.06.003

. Sutter, An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining, International Journal of Machine Tools and Manufacture, vol.43, issue.7, pp.43671-678, 2003.
DOI : 10.1016/S0890-6955(03)00037-3
URL : https://hal.archives-ouvertes.fr/hal-00283393

. Takeuchi, Improvement in the working accuracy of an nc lathe by compensating for thermal expansion, Precision Engineering, vol.4, issue.1, pp.19-24, 1982.
DOI : 10.1016/0141-6359(82)90109-X

. Tarasov, Effects of grinding direction and of abrasive tumbling on the fatigue limit of hardened steel, Am. Soc. Test. Mater, vol.58, pp.528-539, 1958.

C. Taylor, D. Taylor, C. Et, and O. M. , THE FATIGUE PERFORMANCE OF MACHINED SURFACES, Fatigue & Fracture of Engineering Materials and Structures, vol.1, issue.2-3, pp.329-336, 1991.
DOI : 10.1007/BF00042389

C. K. Toh, Surface topography analysis in high speed finish milling inclined hardened steel, Precision Engineering, vol.28, issue.4, pp.386-398, 2004.
DOI : 10.1016/j.precisioneng.2004.01.001

. Tönshoff, Cutting of Hardened Steel, CIRP Annals - Manufacturing Technology, vol.49, issue.2, pp.547-566, 2000.
DOI : 10.1016/S0007-8506(07)63455-6

. Tonshoff, . Brinksmeier, H. K. Tonshoff, B. Et, and E. , Determination of the Mechanical and Thermal Influences on Machined Surfaces by Microhardness and Residual Stress Analysis, CIRP Annals - Manufacturing Technology, vol.29, issue.2, pp.519-530, 1980.
DOI : 10.1016/S0007-8506(16)30145-7

C. Tournier, Usinage à grande vitesse : Technologies, modélisations et trajectoires, 2010.

. Ulutan, Analytical modelling of residual stresses in machining, Journal of Materials Processing Technology, vol.183, issue.1, pp.77-87, 2007.
DOI : 10.1016/j.jmatprotec.2006.09.032

F. Valiorgue, Simulation des processus de génération de contraintes résiduelles en tournage du 316L, Nouvelle approche numérique et expérimentale, 2008.

. Valiorgue, A new approach for the modelling of residual stresses induced by turning of 316L, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.270-273, 2007.
DOI : 10.1016/j.jmatprotec.2007.03.021

W. Weibull, The phenomenon of rupture in solids, Generalstabens Litografiska Anst, 1939.

P. J. Withers, Residual stress and its role in failure, Reports on Progress in Physics, vol.70, issue.12, p.2211, 2007.
DOI : 10.1088/0034-4885/70/12/R04

. Withers, Recent advances in residual stress measurement, International Journal of Pressure Vessels and Piping, vol.85, issue.3, pp.118-127, 2008.
DOI : 10.1016/j.ijpvp.2007.10.007

[. Agha and H. , Tolérance aux défauts initiaux : Application à une fonte G. S. en fatigue, Thèse de doctorat, 1996.

H. Young, Cutting temperature responses to flank wear, Wear, vol.201, issue.1-2, pp.117-120, 1996.
DOI : 10.1016/S0043-1648(96)07227-4
URL : http://ntur.lib.ntu.edu.tw//bitstream/246246/86447/1/11.pdf

. Yourong, Temperature distribution near cutting edge of ceramic cutting tools measured by thermal video system (TVS), Prog. Nat. Sci, vol.8, issue.1, pp.44-50, 1998.