K. Abdel-malek, J. Arora, and V. G. Duffy, Physics-Based Digital Human Modeling, 2008.
DOI : 10.1201/9781420063523.ch5

F. C. Anderson and M. G. Pandy, Dynamic Optimization of Human Walking, Journal of Biomechanical Engineering, vol.123, issue.5, pp.381-390, 2001.
DOI : 10.1115/1.1392310

J. Annett, Subjective rating scales: science or art?, Ergonomics, vol.27, issue.14, pp.966-987, 2002.
DOI : 10.1080/00140139608964495

A. A. Silverstein, B. A. Sjogaard, G. Viikari-juntira, and E. R. , A conceptual model for work-related neck and upper limb disorders, Scandinavian Journal of Work Environment and Health, vol.19, pp.73-84, 1993.

S. Ausejo, X. Wang, and V. G. Duffy, Motion capture and human motion reconstruction Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering, pp.38-39, 2008.

H. Bubb, Research for a strength based discomfort model of posture and movement, 2003.

G. Borg, Borg's perceived exertion and pain scales, 1998.

H. Bubb, F. Fritzsche, and V. G. Duffy, A Scientific Perspective of Digital Human Models Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering, 2008.

D. B. Chaffin, Development of computerized human static strength simulation model for job design, Human Factors and Ergonomics in Manufacturing, vol.7, issue.4, pp.305-322, 1997.
DOI : 10.1002/(SICI)1520-6564(199723)7:4<305::AID-HFM3>3.0.CO;2-7

D. B. Chaffin, Improving digital human modelling for proactive ergonomics in design, Ergonomics, vol.110, issue.5, pp.478-491, 2005.
DOI : 10.1080/001401300421761

D. B. Chaffin and V. G. Duffy, Some Requirements and Fundamental Issues in Digital Human Modeling Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering, 2008.

E. Chateauroux, X. Wang, and J. Trasbot, A Database of Ingress / Egress Motions of Elderly People, SAE Technical Paper Series, 2007.
DOI : 10.4271/2007-01-2493

N. Chevalot and X. Wang, An Experimental Investigation of the Discomfort of Arm Reaching Movements in a Seated Position, SAE Technical Paper Series, pp.93-103, 2004.
DOI : 10.4271/2004-01-2141

M. K. Chung, I. Lee, and D. Kee, Quantitative postural load assessment for whole body manual tasks based on perceived discomfort, Ergonomics, vol.20, issue.5, pp.492-505, 2005.
DOI : 10.1080/00140139408963711

R. D. Crowninshield and R. A. Brand, A physiologically based criterion of muscle force prediction in locomotion, Journal of Biomechanics, vol.14, issue.11, pp.793-801, 1981.
DOI : 10.1016/0021-9290(81)90035-X

H. Cruse, E. Wischmeyer, M. Brã¼wer, P. Brockfeld, and A. Dress, On the cost functions for the control of the human arm movement, Biological Cybernetics, vol.19, issue.6, pp.519-528, 1990.
DOI : 10.1007/BF00205114

B. J. Daams and Y. Wang, Human force exertion in user-product interaction. Backgrounds for design. Delft: Fac. of Industrial Design Engineering Isometric Pull-Push Strengths in workspace: 1 Strength Profiles, International Journal of Occupational Safety and Ergonomics, vol.10, issue.1, pp.43-58, 1994.

B. Das and Y. Wang, Isometric Pull-Push Strengths in Workspace: 2. Analysis of Spatial Factors, International Journal of Occupational Safety and Ergonomics, vol.10, issue.1, pp.59-64, 2004.
DOI : 10.1080/10803548.2004.11076595

F. De-groote, G. Pipeleers, I. Jonkers, B. Demeulenaere, C. Patten et al., A physiology based inverse dynamic analysis of human gait: potential and perspectives, Computer Methods in Biomechanics and Biomedical Engineering, vol.17, issue.5, pp.563-574, 2009.
DOI : 10.1109/10.58599

M. P. De-looze, L. F. Kuijt-evers, and J. H. Van-dieën, Sitting comfort and discomfort and the relationships with objective measures, Ergonomics, vol.44, issue.10, pp.985-997, 2003.
DOI : 10.1016/0003-6870(94)90058-2

N. J. Dellman, C. M. Haslegrave, and D. B. Chaffin, Working postures and movements: tools for evaluation and engineering

S. L. Delp, Surgery simulation: a computer graphics system to analyze and design musculoskeletal reconstructions of the lower limb, 1990.

E. Dessailly, Analyse biomécanique 3D de la marche de l' enfant déficient moteur, 2008.

C. R. Dickerson, B. J. Martin, and D. B. Chaffin, The relationship between shoulder torques and the perception of muscular effort in loaded reaches, Ergonomics, vol.44, issue.11, pp.1036-1051, 2006.
DOI : 10.1080/00140138908966080

N. Doriot and L. Chèze, A Three-Dimensional Kinematic and Dynamic Study of the Lower Limb During the Stance Phase of Gait Using an Homogeneous Matrix Approach, IEEE Transactions on Biomedical Engineering, vol.51, issue.1, pp.21-27, 2004.
DOI : 10.1109/TBME.2003.820357

F. Dufour and X. Wang, Discomfort Assessment of Car Ingress/Egress Motions using the Concept of Neutral Movement, SAE Technical Paper Series, pp.2905-2913, 2005.
DOI : 10.4271/2005-01-2706

R. Dumas, L. Cheze, and J. Verriest, Adjustments to McConville et al. and Young et al. body segment inertial parameters, Journal of Biomechanics, vol.40, issue.3, pp.543-553, 2007.
DOI : 10.1016/j.jbiomech.2006.02.013

A. Erdemir, S. Mclean, W. Herzog, and A. J. Van-der-bogert, Model-based estimation of muscle forces exerted during movements, Clinical Biomechanics, vol.22, issue.2, pp.131-154, 2007.
DOI : 10.1016/j.clinbiomech.2006.09.005

J. Faraway, Modeling reach motions using functional regression analysis. SAE Technical Paper, 2000.

F. A. Fathallah, J. H. Chang, R. L. Berg, W. Pickett, and B. Marlenga, Forces required to operate controls on farm tractors: Implications for young operators, Ergonomics, vol.160, issue.7, pp.51-1096, 2008.
DOI : 10.1136/ip.7.2.123

F. Fraysse, X. Wang, and L. Cheze, Estimation of the Muscle Efforts of the Lower Limb during a Clutch Pedal Operation, SAE Technical Paper Series, 2007.
DOI : 10.4271/2007-01-2487

F. Fraysse, Estimation des activités musculaires au cours du mouvement en vue d'applications ergonomiques, 2009.

S. Gallagher, J. S. Moore, and T. J. Stobbe, Physical Strength Assessment in Ergonomics, 1998.
DOI : 10.1201/9780203908587.ch9.3

C. M. Haslegrave, Factors in the driving task affecting comfort and health, 3rd International Confeference on Vehicle Comfort and Ergonomics, pp.223-230, 1995.

C. M. Haslegrave, N. J. Dellman, C. M. Haslegrave, and D. B. Chaffin, Force exertion Working postures and movements: tools for evaluation and engineering, pp.367-402, 2004.

M. G. Helander and L. Zhang, Field studies of comfort and discomfort in sitting, Ergonomics, vol.35, issue.9, 1997.
DOI : 10.1518/001872096778701962

S. Hignett and L. Mcatamney, Rapid Entire Body Assessment (REBA), Applied Ergonomics, vol.31, issue.2, pp.201-205, 2000.
DOI : 10.1016/S0003-6870(99)00039-3

S. G. Hoffman, M. P. Reed, and D. B. Chaffin, Predicting Force-Exertion Postures from Task Variables, SAE Technical Paper Series, 2007.
DOI : 10.4271/2007-01-2480

S. G. Hoffman, Whole-body postures during standing hand-force exertions: development of a 3D biomechanical posture prediction Model. PhD Dissertation. The University of Michigan, 2008.

E. S. Choe and J. , Human reach posture prediction based on psychophysical discomfort, Campagne Nationale de Mensuration Jung, pp.173-179, 1996.

O. Karhu, P. Kansi, and I. Kuorinka, Correcting working postures in industry: A practical method for analysis, Applied Ergonomics, vol.8, issue.4, pp.199-201, 1977.
DOI : 10.1016/0003-6870(77)90164-8

K. R. Kaufman, K. N. An, W. J. Litchy, and E. Y. Chao, Physiological prediction of muscle forces???II. Application to isokinetic exercise, Neuroscience, vol.40, issue.3, pp.793-804, 1991.
DOI : 10.1016/0306-4522(91)90013-E

D. Kee and W. Karwowski, The boundaries for joint angles of isocomfort for sitting and standing males based on perceived comfort of static joint postures, Ergonomics, vol.1, issue.6, pp.614-648, 2001.
DOI : 10.3758/BF03204312

D. Kee and W. Karwowski, Ranking systems for evaluation of joint and joint motion stressfulness based on perceived discomforts, Applied Ergonomics, vol.34, issue.2, pp.167-176, 2003.
DOI : 10.1016/S0003-6870(02)00141-2

D. Kee and I. Lee, Relationships between subjective and objective measures in assessing postural stresses, Applied Ergonomics, vol.43, issue.2, pp.271-276, 2012.
DOI : 10.1016/j.apergo.2011.06.002

J. H. Kim, J. Yang, and K. Abdel-malek, Multi-objective optimisation approach for predicting seated posture considering balance, International Journal of Vehicle Design, vol.51, issue.3/4, pp.278-291, 2009.
DOI : 10.1504/IJVD.2009.027957

K. H. Kroemer, Die Messung der Muskelstärke des Menschen. Methoden und Techniken, Bremerhaven: Wirtschaftsverl. NW, 1970.

K. H. Kroemer, Foot Operation of Controls, Ergonomics, vol.2, issue.3, pp.333-361, 1971.
DOI : 10.1080/00140137108931255

K. H. Kroemer, Assessment of human muscle strength for engineering purposes: a review of the basics, Ergonomics, vol.42, issue.1, pp.74-93, 1999.
DOI : 10.1080/00140139108964855

L. F. Kuijt-evers, T. Bosh, M. A. Huysmans, M. P. De-looze, and P. Vink, Association between objective and subjective measurements of comfort and discomfort in hand tools, Applied Ergonomics, vol.38, issue.5, 2007.
DOI : 10.1016/j.apergo.2006.05.004

S. Kumar, Muscle strength. Boca Raton, 2004.

A. Lara-lopez, L. Aguilera-cortes, and F. Barbosa-castillo, Measurement of forces applied to handgrips and pedals for a sample population of Mexican males, Applied Ergonomics, vol.30, issue.2, pp.173-176, 1999.
DOI : 10.1016/S0003-6870(97)00065-3

G. Liu and L. Mc-millan, Estimation of missing markers in human motion capture. The Visual Computer, pp.721-728, 2006.

D. G. Lloyd and T. F. Besier, An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo, Journal of Biomechanics, vol.36, issue.6, pp.765-776, 2003.
DOI : 10.1016/S0021-9290(03)00010-1

D. G. Lloyd and T. S. Buchanan, Strategies of muscular support of varus and valgus isometric loads at the human knee, Journal of Biomechanics, vol.34, issue.10, pp.1257-1267, 2001.
DOI : 10.1016/S0021-9290(01)00095-1

L. Ma, W. Zhang, D. Chablat, F. Bennis, and F. Guillaume, Multi-objective optimisation method for posture prediction and analysis with consideration of fatigue effect and its application case, Computers & Industrial Engineering, vol.57, issue.4, pp.1235-1245, 2009.
DOI : 10.1016/j.cie.2009.06.003
URL : https://hal.archives-ouvertes.fr/hal-00430645

K. Manal and T. S. Buchanan, A one-parameter neural activation to muscle activation model: estimating isometric joint moments from electromyograms, Journal of Biomechanics, vol.36, issue.8, pp.1197-202, 2003.
DOI : 10.1016/S0021-9290(03)00152-0

R. T. Marler, J. S. Arora, J. Yang, H. Kim, and K. Abdel-malek, Use of multi-objective optimization for digital human posture prediction, Engineering Optimization, vol.2, issue.10, pp.41-295, 2009.
DOI : 10.1145/195826.195827

R. T. Marler, L. Knake, and R. Johnson, Optimization-Based Posture Prediction for Analysis of Box Lifting Tasks. Digital Human Modeling, pp.151-160, 2011.

L. Mcatamney and E. N. Corlett, RULA: a survey method for the investigation of work-related upper limb disorders, Applied Ergonomics, vol.24, issue.2, pp.91-99, 1993.
DOI : 10.1016/0003-6870(93)90080-S

C. R. Mehta, P. S. Tiwari, S. Rokade, M. M. Pandey, S. C. Pharade et al., Leg strength of Indian operators in the operation of tractor pedals, International Journal of Industrial Ergonomics, vol.37, issue.4, pp.283-289, 2007.
DOI : 10.1016/j.ergon.2006.10.025

F. Mick, Eine experimentelle Untersuchung der Korrelation von Komfortempfinden und Handhabungskräften an Pedalen, 1995.

A. Mital and S. Kumar, Human muscle strength definitions, measurement, and usage: Part I ??? Guidelines for the practitioner, International Journal of Industrial Ergonomics, vol.22, issue.1-2, pp.101-121, 1998.
DOI : 10.1016/S0169-8141(97)00070-X

A. Mital and S. Kumar, Human muscle strength definitions, measurement, and usage: Part II ??? The scientific basis (knowledge base) for the guide, International Journal of Industrial Ergonomics, vol.22, issue.1-2, pp.123-144, 1998.
DOI : 10.1016/S0169-8141(97)00071-1

G. Monnier, F. Renard, A. Chameroy, X. Wang, and J. Trasbot, A Motion Simulation Approach Integrated into a Design Engineering Process, SAE Technical Paper Series, 2006.
DOI : 10.4271/2006-01-2359

G. Monnier, X. Wang, G. Beurier, and J. Trasbot, Coordination of Spine Degrees of Freedom during a Motion Reconstruction Process, SAE Technical Paper Series, 2007.
DOI : 10.4271/2007-01-2454

G. Monnier, X. Wang, J. Trasbot, and V. G. Duffy, RPx: A motion simulation tool for car interior design Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering, 2008.

E. Occhipinti, OCRA: a concise index for the assessment of exposure to repetitive movements of the upper limbs, Ergonomics, vol.43, issue.9, pp.1290-1311, 1998.
DOI : 10.1080/00140139308967940

M. G. Pandy, Computer Modeling and Simulation of Human Movement, Annual Review of Biomedical Engineering, vol.3, issue.1, pp.245-273, 2001.
DOI : 10.1146/annurev.bioeng.3.1.245

R. Pannetier, T. Robert, J. Holmberg, and X. Wang, Optimization-based muscle force scaling for subject specific maximum isometric torque estimation, pp.3-7, 2011.

W. Park, D. Chaffin, B. S. Martin, and C. Harris, Toward Memory-Based Human Motion Simulation: Development and Validation of a Motion Modification Algorithm, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, vol.34, issue.3, pp.376-386, 1982.
DOI : 10.1109/TSMCA.2003.822965

C. Redl, Sensitivity of muscle force estimates to variations in muscle???tendon properties, Human Movement Science, vol.26, issue.2, pp.306-319, 2007.
DOI : 10.1016/j.humov.2007.01.008

M. P. Reed, M. A. Manary, C. A. Flannagan, and L. W. Schneider, A Statistical Method for Predicting Automobile Driving Posture, Human Factors: The Journal of the Human Factors and Ergonomics Society, vol.44, issue.4, pp.557-568, 2002.
DOI : 10.1518/0018720024496917

M. W. Schmidt, C. López-ortiz, P. S. Barrett, L. M. Rogers, and K. G. Gruben, Foot force direction in an isometric pushing task: prediction by kinematic and musculoskeletal models, Experimental Brain Research, vol.17, issue.2, pp.245-254, 2003.
DOI : 10.1016/S0966-6362(02)00069-3

C. Y. Scovil and J. L. Ronsky, Sensitivity of a Hill-based muscle model to perturbations in model parameters, Journal of Biomechanics, vol.39, issue.11, pp.2055-2063, 2006.
DOI : 10.1016/j.jbiomech.2005.06.005

A. Seidl, Das Menschmodell Ramsis: Analyse, Synthese, und Simulation dreidimensionaler Korperhaltungen des Meschen [The man-model RASMSIS: Analysis, Synthesis, and simulation of three-dimensional human body postures, 1994.

T. Seitz, D. Recluta, . Zimmermann, and H. Wirsching, FOCOPP - An Approach for a Human Posture Prediction Model Using Internal/External Forces and Discomfort, SAE Technical Paper Series, 2005.
DOI : 10.4271/2005-01-2694

W. Shen and K. C. Parsons, Validity and reliability of rating scales for seated pressure discomfort, International Journal of Industrial Ergonomics, vol.20, issue.6, pp.441-461, 1997.
DOI : 10.1016/S0169-8141(96)00068-6

J. F. Soechting, C. A. Buneo, U. Herrmann, and M. Flanders, Moving effortlessly in three dimensions: does Donders' law apply to arm movement?, The Journal of Neuroscience, issue.9, pp.15-6271, 1995.

D. Southall, The discrimination of clutch-pedal resistances, Ergonomics, vol.66, issue.9, pp.1311-1317, 1985.
DOI : 10.1080/00140138508963248

S. K. Thorpe, Y. Li, R. H. Crompton, and A. R. Mcneill, Stresses in human leg muscles in running and jumping determined by force plate analysis and from published magnetic resonance images, J. Exp. Biology, vol.201, pp.63-70, 1997.

Y. Uno, M. Kawato, and R. Suzuki, Formation and control of optimal trajectories in human multi-joint arm movements: Minimum torque-change model, Biological Cybernetics, vol.61, pp.89-101, 1989.

S. Van-sint-jan, Color atlas of skeletal landmark definitions, Churchill Livingstone, 2007.

F. E. Veldpaus, H. J. Woltring, and L. Dortmans, A least-squares algorithm for the equiform transformation from spatial marker co-ordinates, Journal of Biomechanics, vol.21, issue.1, pp.45-54, 1988.
DOI : 10.1016/0021-9290(88)90190-X

J. P. Verriest, X. Wang, J. Trasbot, and Y. Tessier, Application of a 3D human model to computer aided ergonomic design of vehicles, in proc. of FISITA'94: Engineering for Customers, pp.53-61, 1994.

P. Vezin and J. P. Verriest, Development of a set of numerical human models for safety, Proceedings of the 19th International Technical Conference on the Enhanced Safety of Vehicles, 2005.

P. Vink and S. Hallbeck, Editorial: Comfort and discomfort studies demonstrate the need for a new model, Applied Ergonomics, vol.43, issue.2, pp.271-276, 2012.
DOI : 10.1016/j.apergo.2011.06.001

X. Wang and J. P. Verriest, A geometric algorithm to predict the arm reach posture for computer-aided ergonomic evaluation, The Journal of Visualization and Computer Animation, vol.9, issue.1, pp.33-47, 1998.
DOI : 10.1002/(SICI)1099-1778(199801/03)9:1<33::AID-VIS174>3.0.CO;2-Q

X. Wang, J. Verriest, B. Lebreton-gadegbeku, Y. Tessier, and J. Trasbot, Experimental investigation and biomechanical analysis of lower limb movements for clutch pedal operation, Ergonomics, vol.17, issue.9, pp.1405-1429, 2000.
DOI : 10.1007/s004220050538

X. Wang, B. L. Breton-gadegbeku, and L. Bouzon, Biomechanical evaluation of the comfort of automobile clutch pedal operation, International Journal of Industrial Ergonomics, vol.34, issue.3, pp.209-221, 2004.
DOI : 10.1016/j.ergon.2004.04.007

X. Wang, M. I. Bullock, N. J. Dellman, C. M. Haslegrave, and D. B. Chaffin, Pedal operation Working postures and movements: tools for evaluation and engineering, pp.190-211, 2004.

X. Wang, N. Chevalot, G. Monnier, and J. Trasbot, From Motion Capture to Motion Simulation: An In-vehicle Reach Motion Database for Car Design, SAE Technical Paper Series, pp.2006-2007, 2006.
DOI : 10.4271/2006-01-2362

X. Wang, N. Chevalot, and J. Trasbot, Prediction of in-vehicle reach surfaces and discomfort by digital human models. SAE Technical Paper, 1869.

X. Wang, Contribution à la simulation du mouvement humain en vue d'application en ergonomie. HDR de Biomécanique, 2008.

X. Wang and V. G. Duffy, Discomfort Evaluation and Motion Measurement Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering, 2008.

X. Wang, C. Barelle, R. Pannetier, and J. Numa, Capacités musculaires des membres inférieurs et supérieurs appliquées aux commandes automobiles et leur perception d'effort, 2009.

X. Wang, C. Barelle, R. Pannetier, J. Numa, and T. Chapuis, A Data-Based Approach for Predicting Variation Range of Hand and Foot Maximum Force on a Control: Application to Hand Brake, 3rd AHFE International Conference, pp.17-20, 2010.
DOI : 10.1201/EBK1439835111-40

X. Wang, R. Pannetier, N. K. Burra, and J. Numa, A Biomechanical Approach for Evaluating Motion Related Discomfort : Illustration by an Application to Pedal Clutching Movement, 14th International Conference on Human-Computer Interaction, pp.9-14, 2011.
DOI : 10.1016/j.ergon.2004.04.007

J. Winkel and R. Westgaard, Occupational and individual risk factors for shoulder-neck complaints: Part II ??? The scientific basis (literature review) for the guide, International Journal of Industrial Ergonomics, vol.10, issue.1-2, pp.85-104, 1992.
DOI : 10.1016/0169-8141(92)90051-Z

H. J. Wirsching and F. Engstler, New enhancements and validation of force based posture and discomfort predictions, IEA World Congress on Ergonomics, pp.12-16, 2012.

J. Yang, R. T. Marler, H. Kim, J. Arora, and K. Abdel-malek, Multi-Objective Optimization for Upper Body Posture Prediction, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2004.
DOI : 10.2514/6.2004-4506

I. Zacher and H. Bubb, Strength based discomfort model of posture and movement. Digital Human Modeling for Design and Engineering Symposium Proceedings, 2004.

F. E. Zajac, Muscle and tendon: properties, models, scaling, and application to biomechanics and motor control, Crit. Rev. Biomed. Eng, vol.17, pp.359-411, 1989.

L. Zhang, M. Helander, and C. Drury, Identifying Factors of Comfort and Discomfort in Sitting, Human Factors: The Journal of the Human Factors and Ergonomics Society, vol.38, issue.3, pp.377-389, 1996.
DOI : 10.1518/001872096778701962

X. Zhang and D. Chaffin, A Three-Dimensional Dynamic Posture Prediction Model For Simulating In-Vehicle Seated Reaching Movements: Development and Validation, 2000.

R. Personal-publication-pannetier, N. K. Burra, J. Numa, T. Robert, and X. Wang, Effects of free adjustment in pedal position on clutching movement and perceived discomfort, IEA DHM 2011. 1 st International Symposium on Digital Human Modelling, pp.14-16, 2011.

R. Pannetier, T. Robert, J. Holmberg, and X. Wang, Optimization-based muscle force scaling for subject specific maximum isometric torque estimation, pp.3-7, 2011.

R. Pannetier, W. , and X. , Development of objective discomfort evaluation indicators for a task-oriented motion using less constrained motion concept: application to automotive pedal clutching task, IEA World Congress on Ergonomics, pp.12-16, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00968847

X. Wang, C. Barelle, R. Pannetier, J. Numa, and T. Chapuis, A Data-Based Approach for Predicting Variation Range of Hand and Foot Maximum Force on a Control: Application to Hand Brake, pp.17-20, 2010.
DOI : 10.1201/EBK1439835111-40

X. Wang, R. Pannetier, N. K. Burra, and J. Numa, A Biomechanical Approach for Evaluating Motion Related Discomfort : Illustration by an Application to Pedal Clutching Movement, 14 th International Conference on Human-Computer Interaction, pp.9-14, 2011.
DOI : 10.1016/j.ergon.2004.04.007