B. Asay, Shock Wave Science and Technology Reference Library Non-Shock Initiation of Explosives. DOI 10, 2010.

B. Azhdar, B. Stenberg, and K. L. , Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction, Polymer Testing, vol.25, issue.8, pp.1069-1080, 2006.
DOI : 10.1016/j.polymertesting.2006.07.009

P. Bailly, F. Delvare, J. Vial, J. Hanus, M. Biessy et al., Dynamic behavior of an aggregate material at simultaneous high pressure and strain rate: SHPB triaxial tests, International Journal of Impact Engineering, vol.38, issue.2-3, pp.73-84, 2011.
DOI : 10.1016/j.ijimpeng.2010.10.005
URL : https://hal.archives-ouvertes.fr/hal-00757019

Z. Ba?ant, F. Bishop, and T. Chang, Confined compression tests of cement paste and concrete up to 300 ksi, pp.553-560, 1986.

G. Ben-dor, A. Dubinsky, and T. Elperin, Localized interaction models with non-constant friction for rigid penetrating impactors, International Journal of Solids and Structures, vol.44, issue.7-8, pp.2593-2607, 2007.
DOI : 10.1016/j.ijsolstr.2006.08.009

A. Bragov, G. Grushevsky, and A. Lomunov, Use of the Kolsky method for studying shear resistance of soils. 4 th International Eurodymat Conference, pp.253-259, 1994.

N. Burlion, Compaction des bétons : éléments de modélisation et caractérisation expérimentale, 1997.

N. Burlion, G. Pijaudier-cabot, and N. Dahan, Experimental analysis of compaction of concrete and mortar, International Journal for Numerical and Analytical Methods in Geomechanics, vol.183, issue.15, pp.1467-1486, 2001.
DOI : 10.1002/nag.178
URL : https://hal.archives-ouvertes.fr/hal-01006829

M. Cartier and P. Kapsa, Techniques de l'ingénieur > Mécanique > Fonctions et composants mécaniques > Comportement en service des systèmes et composants > Usure des contacts mécaniques -Eléments de tribologie, Référence, vol.5066, 2001.

Y. Chen, J. Pavy, and B. Rigaut, Test de frottement à grande vitesse sous faibles charges des céramiques. Publications Centre Technique des Industries Mécaniques, pp.79-104, 1990.

M. Chowdhury, M. Khalil, D. Nuruzzaman, and M. Rahaman, The Effect of Sliding Speed and Normal Load on Friction and Wear Property of Aluminum, International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, vol.11, issue.01

P. Dickson, G. Parker, L. Smilowitz, J. Zucker, and B. Asay, Frictional Heating and Ignition of Energetic Materials, AIP Conference Proceedings, pp.1057-1060, 2005.
DOI : 10.1063/1.2263504

B. Dobratz and P. Crawford, Properties of Chemical Explosives and Explosive Simulants, 1985.
DOI : 10.2172/4285272

B. Durand, F. Delvare, and P. Bailly, Numerical solution of Cauchy problems in linear elasticity in axisymmetric situations, International Journal of Solids and Structures, vol.48, issue.21, pp.3041-3053, 2011.
DOI : 10.1016/j.ijsolstr.2011.06.017
URL : https://hal.archives-ouvertes.fr/hal-00614464

B. Durand, F. Delvare, P. Bailly, and D. Picart, Caractérisation du comportement à l'interface entre un matériau agrégataire et un acier sous forte pression et à grande vitesse, 2011.

B. Durand, F. Delvare, P. Bailly, and D. Picart, A friction test between steel and a brittle material at high contact pressures and high sliding velocities, 10 th International DYMAT Conference, 2012.
DOI : 10.1051/epjconf/20122601017

B. Durand, F. Delvare, P. Bailly, and D. Picart, Identification du frottement entre un explosif et son confinement en acier, 2013.

B. Durand, F. Delvare, P. Bailly, and D. Picart, Identification of the friction under high pressure between an aggregate material and steel: Experimental and modelling aspects, International Journal of Solids and Structures, vol.50, issue.24, pp.4108-4117, 2013.
DOI : 10.1016/j.ijsolstr.2013.08.021

H. Espinosa, A. Patanella, and M. Fisher, A novel dynamic friction experiment using a modified kolsky bar apparatus, Experimental Mechanics, vol.18, issue.2, pp.138-153, 2000.
DOI : 10.1007/BF02325039

P. Evesque, D. Gennes, and P. , Sur la statique des silos Compte Rendu à l'Académie des Sciences, pp.761-766, 1998.
DOI : 10.1016/s1251-8069(98)80011-0

J. Field, G. Swallowe, and S. Heaven, Ignition Mechanisms of Explosives during Mechanical Deformation, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.382, issue.1782, pp.231-275, 1982.
DOI : 10.1098/rspa.1982.0099

P. Forquin, Endommagement et fissuration de matériaux fragiles sous impact balistique, rôle de la microstructure, 2003.

P. Forquin, A. Arias, and R. Zaera, An experimental method of measuring the confined compression strength of geomaterials, International Journal of Solids and Structures, vol.44, issue.13, pp.4291-4317, 2007.
DOI : 10.1016/j.ijsolstr.2006.11.022

P. Forquin, A. Arias, and R. Zaera, Role of porosity in controlling the mechanical and impact behaviours of cement-based materials, International Journal of Impact Engineering, vol.35, issue.3, pp.133-146, 2008.
DOI : 10.1016/j.ijimpeng.2007.01.002
URL : https://hal.archives-ouvertes.fr/hal-00499097

P. Forquin, A. Arias, and R. Zaera, Relationship Between Mesostructure, Mechanical Behaviour and Damage of Cement Composites Under High-Pressure Confinement, Experimental Mechanics, vol.134, issue.4, pp.10-1007, 2008.
DOI : 10.1007/s11340-008-9172-y

P. Forquin, G. Gary, and F. Gatuingt, A testing technique for concrete under confinement at high rates of strain, International Journal of Impact Engineering, vol.35, issue.6, pp.425-446, 2008.
DOI : 10.1016/j.ijimpeng.2007.04.007
URL : https://hal.archives-ouvertes.fr/hal-00994320

P. Forquin, K. Safa, and G. Gary, Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests, Cement and Concrete Research, vol.40, issue.2, pp.321-333, 2009.
DOI : 10.1016/j.cemconres.2009.09.024
URL : https://hal.archives-ouvertes.fr/hal-00425466

G. Gary and P. Bailly, Behaviour of quasi-brittle material at high strain rate. Experiment and modelling, European Journal of Mechanics - A/Solids, vol.17, issue.3, pp.403-420, 1998.
DOI : 10.1016/S0997-7538(98)80052-1
URL : https://hal.archives-ouvertes.fr/hal-00111597

F. Gatuingt, Prévision de la rupture des ouvrages en béton sollicités en dynamique rapide, 1999.

C. Gruau, D. Picart, R. Belmas, E. Bouton, F. Delmaire-sizes et al., Ignition of a confined high explosive under low velocity impact, International Journal of Impact Engineering, vol.36, issue.4, pp.537-550, 2008.
DOI : 10.1016/j.ijimpeng.2008.08.002
URL : https://hal.archives-ouvertes.fr/hal-00585291

W. Grzesik, Z. Zalisk, and P. Nieslony, Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications, Surface and Coatings Technology, vol.155, issue.1, pp.37-45, 2002.
DOI : 10.1016/S0257-8972(02)00040-3

R. Hartley, T. Cloete, and G. Nurick, An experimental assessment of friction effects in the split Hopkinson pressure bar using the ring compression test, International Journal of Impact Engineering, vol.34, issue.10, pp.1705-1728, 2007.
DOI : 10.1016/j.ijimpeng.2006.09.003

C. Hoffman and . Jb, Aspects of the Tribology of the Plastic Bonded Explosive LX-04, Propellants, Explosives, Pyrotechnics, vol.9, issue.6, pp.368-373, 2004.
DOI : 10.1002/prep.200400068

K. Hoge, Friction measurements on explosive materials, Dorough 4 th International Detonation Symposium, 1965.

H. Huang and R. Feng, A study of the dynamic tribological response of closed fracture surface pairs by Kolsky-bar compression-shear experiment, International Journal of Solids and Structures, vol.41, issue.11-12, pp.11-12, 2004.
DOI : 10.1016/j.ijsolstr.2004.01.005

H. Huang and R. Feng, Dynamic tribological response of SiC fracture surfaces, Mechanics of Materials, vol.38, issue.3, pp.186-202, 2006.
DOI : 10.1016/j.mechmat.2005.06.009

H. Huang and R. Feng, Dynamic Friction of SiC Surfaces: A Torsional Kolsky Bar Tribometer Study, Tribology Letters, vol.37, issue.3, pp.329-338, 2007.
DOI : 10.1007/s11249-007-9239-4

M. Irfan and V. Prakash, Time resolved friction during dry sliding of metal on metal, International Journal of Solids and Structures, vol.37, issue.20, pp.2859-2882, 2000.
DOI : 10.1016/S0020-7683(99)00112-2

R. Kazban, V. Peña, K. Mason, and J. , Measurements of Forces and Temperature Fields in High-Speed Machining of 6061-T6 Aluminum Alloy, Experimental Mechanics, vol.128, issue.3, pp.307-317, 2008.
DOI : 10.1007/s11340-007-9069-1

H. Kim, A. Emge, R. Winter, P. Keightley, W. Kim et al., Nanostructures generated by explosively driven friction: Experiments and molecular dynamics simulations, Acta Materialia, vol.57, issue.17, pp.5270-5282, 2009.
DOI : 10.1016/j.actamat.2009.07.034

V. Le, Modélisation et identification du comportement plastique visco-élastique endommageable d'un matériau agrégataire, 2007.

Q. Li, Y. Lu, and H. Meng, Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part II: Numerical simulations, International Journal of Impact Engineering, vol.36, issue.12, pp.1335-1345, 2009.
DOI : 10.1016/j.ijimpeng.2009.04.010
URL : https://hal.archives-ouvertes.fr/hal-00618189

L. Malvern, D. Jenkinds, T. Tang, and S. Mclure, Dynamic testing of laterally confined concrete, micromechanics of failure of quasi-brittle materials, pp.343-52, 1991.

I. Nistor, . Pantalé, . Olivier, S. Caperaa, and C. Sattouf, A new dynamic test for the identification of high speed friction law using a gas-gun device, Journal de Physique IV (Proceedings), vol.110, pp.519-524, 2003.
DOI : 10.1051/jp4:20020746

K. Ogawa, Impact friction test method by applying stress wave, Experimental Mechanics, vol.60, issue.578, pp.398-402, 1997.
DOI : 10.1007/BF02317304

D. Paulmier, H. Zaidi, R. Bedri, E. Kadiri, L. Pan et al., Steel surface modifications in magnetised sliding contact, Surface and Coatings Technology, vol.76, issue.77, pp.76-77, 1995.
DOI : 10.1016/02578-9729(50)2607X-

S. Philippon, G. Sutter, J. Dedourge, and A. Molinari, Etude expérimentale du frottement, High Speed Machining, pp.57-60, 2003.

S. Philippon, G. Sutter, and A. Molinari, An experimental study of friction at high sliding velocities, Wear, vol.257, issue.7-8, pp.777-787, 2004.
DOI : 10.1016/j.wear.2004.03.017

S. Philippon, G. Voyiadjis, L. Faure, A. Lodygowski, A. Rusinek et al., A Device Enhancement for the Dry Sliding Friction Coefficient Measurement Between Steel 1080 and VascoMax with Respect to Surface Roughness Changes, Experimental Mechanics, vol.15, issue.1, pp.337-358, 2011.
DOI : 10.1007/s11340-010-9368-9

D. Picart, F. Delmaire-sizes, C. Gruau, and H. Trumel, IGNITION OF HMX-BASED PBX SUBMITTED TO IMPACT: STRAIN LOCALIZATION AND BOUNDARY CONDITIONS, 16 th Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, 2009.
DOI : 10.1063/1.3295161

D. Picart and E. Bouton, Non-shock ignition of a HMX-based high explosive: thermomechanical numerical study. 14 th International Detonation Symposium, 2010.

D. Picart, D. Damiani, and M. Doucet, The reverse edge-on impact test: A small scale experiment for non-shock ignition studies, Topical Group on Shock Compression of Condensed Matter, 2011.
DOI : 10.1063/1.3686326

D. Picart, J. Ermisse, M. Biessy, E. Bouton, and H. Trumel, Initiation of HMX-based PBX when submitted to a weak impact: the Susan test, International Pyrotechnics Seminar, 2013.

V. Prakash, A pressure-shear plate impact experiment for investigating transient friction, Experimental Mechanics, vol.48, issue.N938, pp.329-336, 1995.
DOI : 10.1007/BF02317542

S. Rajagopalan, M. Irfan, and V. Prakash, Novel experimental techniques for investigating time resolved high speed friction, Wear, vol.225, issue.229, pp.225-229, 1999.
DOI : 10.1016/S0043-1648(99)00071-X

S. Rajagopalan and V. Prakash, A modified torsional kolsky bar for investigating dynamic friction, Experimental Mechanics, vol.35, issue.30, pp.295-303, 1999.
DOI : 10.1007/BF02329808

S. Rajagopalan and V. Prakash, An experimental method to study high speed sliding characteristics during forward and reverse slip, Wear, vol.249, issue.8, pp.687-701, 2001.
DOI : 10.1016/S0043-1648(01)00697-4

R. Ranjan and S. Kumar, Effect of interfacial friction during forging of solid powder discs of large slenderness ratio, Sadhana, vol.18, issue.5, pp.535-543, 2004.
DOI : 10.1007/BF02703260

D. Ryckelynck and M. Meiller, Mod??lisation du frottement outil???pi??ce pour la simulation de la coupe par la m??thode des ??l??ments finisFriction modelisation of tool workpiece contact for the finite element simulation of cutting process, M??canique & Industries, vol.3, issue.4, pp.323-332, 2002.
DOI : 10.1016/S1296-2139(02)01172-7

J. Saulnier, Transferts thermiques : conduction, Cours ENSMA, 2003.

Y. Tien, P. Wu, W. Huang, M. Kuo, and C. Chu, Wall friction measurement and compaction characteristics of bentonite powders, Powder Technology, vol.173, issue.2, pp.140-151, 2007.
DOI : 10.1016/j.powtec.2006.11.023

H. Trumel, P. Lambert, and G. Vivier, Toward physically-based explosive modelling: mesoscale investigations. In: Materials under extreme loadings. Application to penetration and impact, in press

K. Vandersall, S. Chidester, J. Forbes, F. Garcia, D. Greenwood et al., Experimental and modeling studies of crush, puncture, and perforation scenarios in the Steven impact test, Office Naval Research ONR 333-05-02 Proceeding 12 th international detonation symposium, pp.131-139, 2002.

V. Peña, K. Mason, J. Li, and M. , Experimental study of the temperature field generated during orthogonal machining of an aluminum alloy, Experimental Mechanics, vol.2, issue.2, pp.221-229, 2003.
DOI : 10.1007/BF02410886

S. Walley, P. Church, M. Furth, and J. Field, A High-Speed Photographic Study of the Rapid Deformation of Metal Annuli : Comparison of Theory with Experiment, Le Journal de Physique IV, vol.07, issue.C3, pp.317-322, 1997.
DOI : 10.1051/jp4:1997356
URL : https://hal.archives-ouvertes.fr/jpa-00255513

D. Wiegand, The influence of confinement on the mechanical properties of energetic materials, AIP Conference Proceedings, pp.675-678, 1999.
DOI : 10.1063/1.1303563

D. Wiegand and B. Reddingius, Mechanical Properties of Plastic Bonded Composites as a Function of Hydrostatic Pressure, AIP Conference Proceedings, pp.812-815, 2003.
DOI : 10.1063/1.1780361

D. Wiegand and B. Reddingius, The strengthening of energetic materials under pressure, 24 th Army Science Conference, 2004.

R. Winter, G. Ball, and P. Keightley, Mechanisms of shock-induced dynamic friction, Journal of Physics D: Applied Physics, vol.39, issue.23, pp.5043-5053, 2006.
DOI : 10.1088/0022-3727/39/23/022