A. L. Bibliographie and J. D. Mohd, The effect of gross sliding fretting wear on stress distributions in W-DL-C coatings systems, Tribology International, vol.43, pp.1917-1932, 2010.

A. International, Characterisation and Failure Analysis of Plastics, 2003.

S. Bagherifard, R. Ghelichi, and M. Guagliano, A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material, Surface and Coatings Technology, vol.204, issue.24, pp.4081-4090, 2010.
DOI : 10.1016/j.surfcoat.2010.05.035

J. Barber, Elasticity (3rd Revised Edition ed, 2010.

. Berthier, ??? 13-Juillet) Mécanisme et tribologie, Thèse et Science, vol.88, 1988.

Y. Berthier, L. Vincent, and M. Godet, Fretting fatigue and fretting wear, Tribology International, vol.22, issue.4, pp.235-242, 1989.
DOI : 10.1016/0301-679X(89)90081-9

H. Bûfler, Zur Theorie der rollenden Reibung, Ingenieur-Archiv, vol.27, issue.3, pp.141-377, 1959.
DOI : 10.1007/BF00536384

C. Colombie, Usure induite sous petits débattements : identification des phénomènes, Thèse doctorale ECL 86-11, p.119, 1986.

T. Dick, C. Paulin, G. Cailletaud, and S. Fouvry, Experimental and numerical analysis of local and global plastic behaviour in fretting wear, Tribology International, vol.39, issue.10, pp.1036-1044, 2006.
DOI : 10.1016/j.triboint.2006.02.023
URL : https://hal.archives-ouvertes.fr/hal-00136776

L. Dundurs, Properties of elastic bodies in contact, mechanics of contact between deformable bodies, 1975.
DOI : 10.1007/978-94-011-8137-2_4

. Fillot, Wear modeling and the third body concept, Wear, vol.262, issue.7-8, pp.949-957, 2007.
DOI : 10.1016/j.wear.2006.10.011

S. Fouvry, Etude quantitative des dégradations en fretting, Thèse ECL. France, 1997.

M. Frija, T. Hassine, R. Fathallah, C. Bouraoui, and A. Dogui, Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity, Materials Science and Engineering: A, vol.426, issue.1-2, pp.173-180, 2006.
DOI : 10.1016/j.msea.2006.03.097

E. Ghita and L. Marsavina, Fotoelasticimetria. Metoda moderna in analiza experimentala a tensiunilor, 2002.

. Godet, The third-body approach: A mechanical view of wear, Wear, vol.100, issue.1-3, pp.437-452, 1984.
DOI : 10.1016/0043-1648(84)90025-5

C. Goh, D. Mcdowell, and R. Neu, Plasticity in polycrystalline fretting fatigue contacts, Journal of the Mechanics and Physics of Solids, vol.54, issue.2, pp.340-367, 2006.
DOI : 10.1016/j.jmps.2005.06.009

H. Hertz, Über die Berührung fester elastischer Körper. On the contact of elastic solids, Reine und angewandte Mathematik. London: (Instruction anglaise dans Miscellaneous papers by H. Hertz) Eds Jones et Schaott, 1896.

K. Johnson, Contact Mechanics, 1985.

&. Kabo and . Edberg, Material defects in rolling contact fatigue of railway wheels???the influence of defect size, Wear, vol.258, issue.7-8, pp.1194-1200, 2005.
DOI : 10.1016/j.wear.2004.03.070

. Kabo, Material defects in rolling contact fatigue ??? influence of overloads and defect clusters, International Journal of Fatigue, vol.24, issue.8, pp.887-894, 2002.
DOI : 10.1016/S0142-1123(01)00193-1

E. Kabo, Fatigue initiation in railway wheels???a numerical study of the influence of defects, Wear, vol.253, issue.1-2, pp.26-34, 2002.
DOI : 10.1016/S0043-1648(02)00079-0

Y. Kamran and P. Larsson, Second-order effects at microindentation of elastic polymers using sharp indenters, Materials & Design, vol.32, issue.6, 2011.
DOI : 10.1016/j.matdes.2011.01.043

K. Komvopoulos and . Gong, Stress analysis of a layered elastic solid in contact with a rough surface exhibiting fractal behavior, International Journal of Solids and Structures, vol.44, issue.7-8, pp.2109-2129, 2007.
DOI : 10.1016/j.ijsolstr.2006.06.043

C. Kuo, Contact stress analysis of an elastic half-plane containing multiple inclusions, International Journal of Solids and Structures, vol.45, issue.16, pp.4562-4573, 2008.
DOI : 10.1016/j.ijsolstr.2008.03.032

J. Leroux and D. Nélias, Stick-slip analysis of a circular point contact between a rigid sphere and a flat unidirectional composite with cylindrical fibers, International Journal of Solids and Structures, vol.48, issue.25-26, pp.3510-3520, 2011.
DOI : 10.1016/j.ijsolstr.2011.09.007
URL : https://hal.archives-ouvertes.fr/hal-00938625

Y. Liao, Y. Zhou, and L. Jiang, Measuring elastic???plastic properties of thin films on elastic???plastic substrates by sharp indentation, Mechanics of Materials, vol.41, issue.3, pp.308-318, 2009.
DOI : 10.1016/j.mechmat.2008.10.008

E. Lokensgard, Industrial Plastics. Theory and applications, 2003.

M. Evan and E. , Stresses in elastic cylinders in contact along a generatrix, pp.454-459, 1949.

I. Mccoll, J. Ding, and S. Leen, Finite element simulation and experimental validation of fretting wear, Wear, vol.256, issue.11-12, pp.1114-1127, 2004.
DOI : 10.1016/j.wear.2003.07.001

M. Tobi, A. Ding, J. Bandak, G. Leen, S. Shipway et al., A study on the interaction between fretting wear and cyclic plasticity for Ti???6Al???4V, Wear, vol.267, issue.1-4, pp.270-282, 2009.
DOI : 10.1016/j.wear.2008.12.039

B. Poon, D. Rittel, and G. Ravichandral, An analysis of nanoindentation in linearly elastic solids, International Journal of Solids and Structures, vol.45, issue.24, pp.6018-6033, 2008.
DOI : 10.1016/j.ijsolstr.2008.07.021

M. Priest and C. Taylor, Automobile engine tribology ??? approaching the surface, Wear, vol.241, issue.2, pp.193-203, 2000.
DOI : 10.1016/S0043-1648(00)00375-6

M. Reyne, Les matériaux nouveaux. Paris: Hermes, 1990.

M. H. Sadd, Elasticity. Theory, applications and numerics, 2009.

. Saulot, Numerical study of the wear flows in a plane contact, Tribology Series, vol.43, pp.85-93, 2003.
DOI : 10.1016/S0167-8922(03)80037-8
URL : https://hal.archives-ouvertes.fr/hal-00507333

J. Smith and C. Liu, Stresses due to tangential and normal loads on an elastic solid, ASME J. Appl. Mechs, vol.20, pp.157-166, 1953.

. Syntec, Syntec Optics. Retrieved 2013 ??? 15-01 from http

M. Taraf, Endommagement par fatigue de contact de roulement d'une roue ferroviaire: étude numérique par éléments finis, Thèse doctorale N°, 2008.

C. Taylor, Automobile engine tribology???design considerations for efficiency and durability, Wear, vol.221, issue.1, pp.1-8, 1998.
DOI : 10.1016/S0043-1648(98)00253-1

S. Terekhina, S. Fouvry, M. Salvia, and I. Bulanov, An indirect method based on fretting tests to characterize the elastic properties of materials: Application to an epoxy resin RTM6 under variable temperature conditions, Wear, vol.269, issue.7-8, pp.632-637, 2010.
DOI : 10.1016/j.wear.2010.06.008

S. Timoshenko and J. Goodier, Theory of Elasticity, 1951.

H. Tresca, Mém. présentées par divers savants, 1937.

C. Tsai and S. Mall, Elasto-plastic finite element analysis stresses in pre-stressed strip in contact with cylindrical pad. Finite Elements in Analysis and Design, pp.171-187, 2000.

H. Unal, U. Sen, and A. Mimaroglu, Abrasive wear behaviour of polymeric materials, Materials & Design, vol.26, issue.8, pp.705-710, 2005.
DOI : 10.1016/j.matdes.2004.09.004

O. Vingsbo and S. Soderberg, On fretting maps, Wear, vol.126, issue.2, pp.131-147, 1988.
DOI : 10.1016/0043-1648(88)90134-2

L. Wang, Y. Wang, X. G. Sun, Z. Y. Pan, J. Q. He et al., Influence of pores on the surface microcompression mechanical response of thermal barrier coatings fabricated by atmospheric plasma spray???Finite element simulation, Applied Surface Science, vol.257, issue.6, pp.2238-2249, 2011.
DOI : 10.1016/j.apsusc.2010.09.081

W. Siang-sum and E. J. , Finite element, critical-plane fatigue life prediction of simple and complex contact configurations, International Journal of Fatigue, vol.27, pp.403-416, 2005.

W. Yan, Q. Sun, X. Feng, and L. Qian, Analysis of spherical indentation of superelastic shape memory alloys, International Journal of Solids and Structures, vol.44, issue.1, pp.1-17, 2007.
DOI : 10.1016/j.ijsolstr.2006.04.007

G. Zambelli and L. Vincent, Matériaux et contacts. Une approche tribologique, 1998.