E. Willis, Surface finish in relation to cylinder liners, Wear, vol.109, issue.1-4, pp.351-366, 1986.
DOI : 10.1016/0043-1648(86)90278-4

M. Organisciak, Optimisation de la microgéométrie des chemises de moteurs à combustion interne, Thèse de doctorat, L'Institut National des Sciences Appliquées de Lyon, 2007.

D. B. Hamilton, J. A. Walowit, and C. M. Allen, A Theory of Lubrication by Microirregularities, Journal of Basic Engineering, vol.88, issue.1, pp.177-185, 1966.
DOI : 10.1115/1.3645799

D. F. Moore, A history of research on surface texture effects, Wear, vol.13, issue.6, pp.381-412, 1969.
DOI : 10.1016/0043-1648(69)90020-9

D. F. Moore, Summary, Journal of the Royal Aeronautical Society, vol.78, issue.653, 1965.
DOI : 10.1017/S0022112064001240

J. B. Williamson and R. T. Hunt, Relocation profilometry, Journal of Physics E: Scientific Instruments, vol.1, issue.7, p.749, 1968.
DOI : 10.1088/0022-3735/1/7/312

S. T. Tzeng and E. Saibel, Surface Roughness Effect on Slider Bearing Lubrication, A S L E Transactions, vol.85, issue.3, pp.334-338, 1967.
DOI : 10.1080/05698196708972191

H. Christensen, Stochastic models for hydrodynamic lubrication of rough surfaces, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.184, issue.1969, p.1013, 1969.
DOI : 10.1243/PIME_PROC_1969_184_074_02

H. Christensen and K. Tønder, The Hydrodynamic Lubrication of Rough Bearing Surfaces of Finite Width, Journal of Lubrication Technology, vol.93, issue.3, p.324, 1971.
DOI : 10.1115/1.3451579

K. Tønder and H. Christensen, Waviness and Roughness in Hydrodynamic Lubrication, Proceedings of the Institution of Mechanical Engineers, vol.186, issue.1, p.807, 1972.
DOI : 10.1243/PIME_PROC_1972_186_096_02

L. S. Chow and H. S. Cheng, Influence of Surface Roughness and Waviness on Film Thickness and Pressure Distribution in EHD Contacts, 1976.

L. S. Chow and H. S. Cheng, Influence of Surface Roughness on Average Film Thickness Between Lubricated Rollers, Journal of Lubrication Technology, Trans. ASME, Series F, pp.98-117, 1976.

N. Patir and H. S. Cheng, An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication, Journal of Lubrication Technology, vol.100, issue.1, pp.12-18, 1978.
DOI : 10.1115/1.3453103

N. Patir and H. S. Cheng, Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces, Journal of Lubrication Technology, vol.101, issue.2, pp.220-230, 1979.
DOI : 10.1115/1.3453329

Y. G. Schneider, Formation of surfaces with uniform micropatterns on precision machine and instruments parts, Precision Engineering, vol.6, issue.4, pp.219-225, 1984.
DOI : 10.1016/0141-6359(84)90007-2

N. Saka, M. J. Lio, and N. P. Suh, The role of tribology in electrical contact phenomena, Wear, vol.100, issue.1-3, pp.77-105, 1984.
DOI : 10.1016/0043-1648(84)90007-3

M. Geiger, S. Roth, and W. Becker, Influence of Laser-Produced Microstructures on the Tribological Behavior of Ceramics, Surface and Coatings Technology, pp.100-101, 1998.

M. Geiger, U. Popp, and U. Engel, Excimer Laser Micro Texturing of Cold Forging Tool Surfaces - Influence on Tool Life, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.231-234, 2002.
DOI : 10.1016/S0007-8506(07)61506-6

I. Etsion and L. Burstein, A Model for Mechanical Seals with Regular Microsurface Structure, Tribology Transactions, vol.50, issue.3, pp.677-683, 1996.
DOI : 10.1243/JMES_JOUR_1980_022_016_02

I. Etsion, G. Halperin, and Y. Greenberg, Increasing Mechanical Seal Life with Laser-Textured Seal Faces, Proc. 15 th Int. Conf. on Fluid Sealing, BHR Group, pp.3-11, 1997.

M. Wakuda, Y. Yamauchi, S. Kanzaky, and Y. Yasuda, Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact, Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials under Lubricated Sliding Contact, pp.356-363, 2003.
DOI : 10.1016/S0043-1648(03)00004-8

X. Wang and K. Kato, Improving the Anti-Seizure Ability of SiC Seal in Water with RIE texturing, Tribology Letters, vol.14, issue.4, pp.275-280, 2003.
DOI : 10.1023/A:1022650813314

U. Pettersson and S. Jacobson, Influence of surface texture on boundary lubricated sliding contacts, Tribology International, vol.36, issue.11, pp.857-864, 2003.
DOI : 10.1016/S0301-679X(03)00104-X

A. Ronen, I. Etsion, and Y. Kligerman, Friction-Reducing Surface-Texturing in Reciprocating Automotive Components, Tribology Transactions, vol.88, issue.3, pp.359-366, 2001.
DOI : 10.1016/S0301-679X(00)00103-1

G. Ryk, Y. Kligerman, and I. Etsion, Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components, Tribology Transactions, vol.102, issue.4, pp.444-449, 2002.
DOI : 10.1016/S0301-679X(01)00063-9

S. W. Lo and W. R. Wilson, A Theoretical Model of Micro-Pool Lubrication in Metal Forming, Journal of Tribology, vol.121, issue.4, pp.731-738, 1999.
DOI : 10.1115/1.2834129

P. Baumgart, D. J. Krajnovich, T. A. Nguyen, and A. C. Tam, A new laser texturing technique for high performance magnetic disk drives, IEEE Transactions on Magnetics, vol.31, issue.6, pp.31-2946, 1995.
DOI : 10.1109/20.490199

K. Komvopoulos, Adhesion and friction forces in microelectromechanical systems: mechanisms, measurement, surface modification techniques, and adhesion theory, Journal of Adhesion Science and Technology, vol.75, issue.4, pp.477-517, 2003.
DOI : 10.1163/15685610360554384

M. Varenberg, G. Halperin, and I. Etsion, Different aspects of the role of wear debris in fretting wear, Wear, vol.252, issue.11-12, pp.902-910, 2002.
DOI : 10.1016/S0043-1648(02)00044-3

U. Pettersson and J. Jacobson, Influence of surface texture on boundary lubricated sliding contacts, Tribology International, vol.36, issue.11, pp.857-864, 2003.
DOI : 10.1016/S0301-679X(03)00104-X

A. Borghi, E. Gualtieri, D. Marchetto, L. Moretti, and S. Valeri, Tribological effects of surface texturing on nitriding steel for high-performance engine applications, Wear, vol.265, issue.7-8, pp.1046-1051, 2008.
DOI : 10.1016/j.wear.2008.02.011

H. Tian, N. Saka, and N. P. Suh, Boundary Lubrication Studies on Undulated Titanium Surfaces, Tribology Transactions, vol.108, issue.115, pp.289-296, 1989.
DOI : 10.1080/10402008908981891

G. Ryk, Y. Kligerman, and I. Etsion, Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components, Tribology Transactions, vol.102, issue.4, pp.449-449, 2002.
DOI : 10.1016/S0301-679X(01)00063-9

Y. Uehara, M. Wakuda, Y. Yamauchi, S. Kanzaki, and S. Sakaguchi, Tribological properties of dimpled silicon nitride under oil lubrication, Journal of the European Ceramic Society, vol.24, issue.2, pp.369-373, 2004.
DOI : 10.1016/S0955-2219(03)00220-6

L. M. Vilhena, M. Sedlacek, B. Podgornik, J. Vizintin, A. Babnik et al., Surface texturing by pulsed Nd:YAG laser, Tribology International, vol.42, issue.10, pp.1496-1504, 2009.
DOI : 10.1016/j.triboint.2009.06.003

P. Pawlus, L. Galda, A. Dzierwa, and W. Koszela, Abrasive wear resistance of textured steel rings, Wear, vol.267, issue.11, pp.1873-1882, 2009.
DOI : 10.1016/j.wear.2009.03.003

S. P. Mishra and A. A. Polycarpou, Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors, Tribology International, vol.44, issue.12, pp.1890-1901, 2011.
DOI : 10.1016/j.triboint.2011.08.005

M. H. Cho and S. Park, Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding, Tribology International, vol.44, issue.7-8, pp.859-867, 2011.
DOI : 10.1016/j.triboint.2011.03.001

W. Ze, D. Jianxin, X. Youqiang, C. Hongwei, and Z. Jun, Effect of surface texturing on friction properties of WC/Co cemented carbide, Materials and Design, pp.41142-149, 2012.

W. Koszela, A. Dzierwa, L. Galda, and P. Pwalus, Experimental investigation of oil pockets effect on abrasive wear resistance, Tribology International, vol.46, pp.145-153, 2012.
DOI : 10.1016/j.triboint.2011.05.001

A. Kovalchenko, O. Ajayi, A. Erdemir, and G. Fenske, Friction and wear behavior of laser textured surface under lubricated initial point contact, Wear, vol.271, issue.9-10, pp.1719-1725, 2011.
DOI : 10.1016/j.wear.2010.12.049

X. Wang, K. Kato, K. Adachi, and K. Aizawa, The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed, Tribology International, vol.34, issue.10, pp.703-711, 2001.
DOI : 10.1016/S0301-679X(01)00063-9

A. Kovalchenko, O. Ajayi, A. Erdemir, G. Fenske, and I. Etsion, The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact, Tribology International, vol.38, issue.3, pp.219-225, 2005.
DOI : 10.1016/j.triboint.2004.08.004

L. Galda, P. Pawlus, and J. Sep, Dimples shape and distribution effect on characteristics of Stribeck curve, Tribology International, vol.42, issue.10, pp.1505-1512, 2009.
DOI : 10.1016/j.triboint.2009.06.001

M. Wakuda, Y. Yamauchi, S. Kanzaki, and Y. Yasuda, Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact, Wear, vol.254, issue.3-4, pp.356-363, 2003.
DOI : 10.1016/S0043-1648(03)00004-8

L. Mourier, D. Mazuyer, A. A. Lubrecht, and C. Donnet, Transient increase of film thickness in micro-textured EHL contacts, Tribology International, vol.39, issue.12, pp.1745-1756, 2006.
DOI : 10.1016/j.triboint.2006.02.037
URL : https://hal.archives-ouvertes.fr/hal-00507270

I. Krupka and M. Hartl, The effect of surface texturing on thin EHD lubrication films, Tribology International, vol.40, issue.7, pp.1100-1110, 2007.
DOI : 10.1016/j.triboint.2006.10.007

I. Krupka, M. Vrbka, and M. Hartl, Effect of surface texturing on mixed lubricated non-conformal contacts, Tribology International, pp.41-1063, 2008.

I. Krupka, R. Poliscuk, and . Hartl, Behavior of thin viscous boundary films in lubricated contacts between micro-textured surfaces, Tribology International, vol.42, issue.4, pp.535-541, 2009.
DOI : 10.1016/j.triboint.2008.03.013

I. Krupka, P. Svoboda, and M. Hartl, Effect of surface topography on mixed lubrication film formation during start up under rolling/sliding conditions, Tribology International, vol.43, issue.5-6, pp.1035-1042, 2010.
DOI : 10.1016/j.triboint.2009.12.017

M. Suh, Y. Chae, S. Kim, T. Hinoki, and A. Kohyama, Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction, Tribology International, vol.43, issue.8, pp.1508-1517, 2010.
DOI : 10.1016/j.triboint.2010.02.012

Y. Qiu and M. M. Khonsari, Experimental investigation of tribological performance of laser textured stainless steel rings, Tribology International, vol.44, issue.5, pp.635-644, 2011.
DOI : 10.1016/j.triboint.2011.01.003

A. Ramesh, W. Akram, S. Mishra, A. Cannon, A. Polycarpou et al., Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication, Tribology International, vol.57, pp.170-176, 2013.
DOI : 10.1016/j.triboint.2012.07.020

D. Dowson and C. M. Taylor, Fundamental Aspects of Cavitation in Bearings, Proceedings of the 1 st Lyon-Leeds Symposium in Tribology, Cavitation and Related Phenomena in Lubrication, pp.15-28, 1975.

J. N. Anno, J. A. Walowit, and C. M. Allen, Microasperity Lubrication, Journal of Lubrication Technology, vol.90, issue.2, pp.351-355, 1968.
DOI : 10.1115/1.3601568

J. N. Anno, J. A. Walowit, and C. M. Allen, Load Support and Leakage from Microasperity-Lubricated Face Seals, Journal of Lubrication Technology, vol.91, issue.4, pp.726-731, 1969.
DOI : 10.1115/1.3555030

I. Etsion, Y. Kligerman, and G. Halperin, Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces, Tribology Transactions, vol.103, issue.3, pp.511-516, 1999.
DOI : 10.1243/JMES_JOUR_1980_022_053_02

I. Etsion and G. Halperin, A Laser Surface Textured Hydrostatic Mechanical Seal, Tribology Transactions, vol.45, issue.3, pp.430-434, 2002.
DOI : 10.1016/S0301-679X(01)00063-9

Y. Kligerman and I. Etsion, Analysis of the Hydrodynamic Effects in a Surface Textured Circumferential Gas Seal, Tribology Transactions, vol.2000, issue.3, pp.472-478, 2004.
DOI : 10.1080/10402000008982349

V. Brizmer, Y. Kligerman, and I. Etsion, A Laser Surface Textured Parallel Thrust Bearing, Tribology Transactions, vol.60, issue.3, pp.397-403, 2003.
DOI : 10.1016/S0301-679X(01)00084-6

I. Etsion, G. Halperin, V. Brizmer, and Y. Kligerman, Experimental Investigation of Laser Surface Textured Parallel Thrust Bearings, Tribology Letters, vol.17, issue.2, pp.295-300, 2004.
DOI : 10.1023/B:TRIL.0000032467.88800.59

I. Etsion and E. Sher, Improving fuel efficiency with laser surface textured piston rings, Tribology International, vol.42, issue.4, pp.542-547, 2009.
DOI : 10.1016/j.triboint.2008.02.015

G. Ryk, Y. Kligerman, I. Etsion, and A. Shinkarenko, Experimental Investigation of Partial Laser Surface Texturing for Piston-Ring Friction Reduction, Tribology Transactions, vol.16, issue.4, pp.583-588, 2005.
DOI : 10.1080/05698190500313544

Y. Kligerman, I. Etsion, and A. Shinkarenko, Improving Tribological Performance of Piston Rings by Partial Surface Texturing, Journal of Tribology, vol.127, issue.3, pp.632-638, 2005.
DOI : 10.1115/1.1866171

G. Ryk and I. Etsion, Testing piston rings with partial laser surface texturing for friction reduction, Wear, vol.261, issue.7-8, pp.792-796, 2006.
DOI : 10.1016/j.wear.2006.01.031

X. Wang, K. Adachi, K. Otsuka, and K. Kato, Optimization of the surface texture for silicon carbide sliding in water, Applied Surface Science, vol.253, issue.3, pp.1282-1286, 2006.
DOI : 10.1016/j.apsusc.2006.01.076

V. G. Marian, M. Kilian, and W. Scholz, Theoretical and experimental analysis of a partially textured thrust bearing with square dimples, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.1, issue.7, pp.771-778, 2007.
DOI : 10.1243/13506501JET292

H. L. Costa and I. M. Hutchings, Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions, Tribology International, vol.40, issue.8, pp.1277-1238, 2007.
DOI : 10.1016/j.triboint.2007.01.014

S. Y. Yang, H. F. Wang, and F. Guo, Experimental investigation on the groove effect in hydrodynamic lubrication, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.226, issue.4, pp.263-273, 2011.
DOI : 10.1177/1350650111430288

X. Jia, S. Jung, W. Haas, and R. Salant, Numerical simulation and experimental study of shaft pumping by laser structured shafts with rotary lip seals, Tribology International, vol.44, issue.5, pp.651-659, 2011.
DOI : 10.1016/j.triboint.2011.01.005

M. B. Dobrica and M. Fillon, About the validity of Reynolds equation and inertia effects in textured sliders of infinite width, Proceedings of the Institution of Mechanical Engineers, pp.69-78, 2009.
DOI : 10.1243/13506501JET433

J. A. Tichy and S. H. Chen, Plane Slider Bearing Load Due to Fluid Inertia???Experiment and Theory, Journal of Tribology, vol.107, issue.1, pp.32-38, 1985.
DOI : 10.1115/1.3260999

M. Arghir, N. Roucou, M. Helene, and J. Frene, Theoretical Analysis of the Incompressible Laminar Flow in a Macro-Roughness Cell, Journal of Tribology, vol.125, issue.2, pp.309-318, 2003.
DOI : 10.1115/1.1506328

D. J. Song, D. K. Seo, and W. W. Shults, A comparison study between navier-stokes equation and reynolds equation in lubricating flow regime, KSME International Journal, vol.113, issue.2, pp.599-605, 2003.
DOI : 10.1115/1.2910524

F. Sahlin, S. B. Glavatskih, T. Almqvist, and R. Larsson, Two-Dimensional CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication, Journal of Tribology, vol.127, issue.1, pp.96-102, 2005.
DOI : 10.1115/1.1828067

Y. Feldman, Y. Kligerman, I. Etsion, and S. Haber, The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces, Journal of Tribology, vol.128, issue.2, pp.345-350, 2006.
DOI : 10.1115/1.2148419

A. Kraker, R. A. Ostayen, A. Beek, and D. J. Rixen, A Multiscale Method Modeling Surface Texture Effects, Journal of Tribology, vol.129, issue.2, pp.221-230, 2007.
DOI : 10.1115/1.2540156

M. B. Dobrica and M. Fillon, Reynolds' Model Suitability in Simulating Rayleigh Step Bearing Thermohydrodynamic Problems, Tribology Transactions, vol.44, issue.4, pp.522-530, 2005.
DOI : 10.1080/05698190500385088

M. Arghir, A. Alsayed, and D. Nicolas, The finite volume solution of the Reynolds equation of lubrication with film discontinuities, International Journal of Mechanical Sciences, vol.44, issue.10, pp.2119-2132, 2002.
DOI : 10.1016/S0020-7403(02)00166-2

M. B. Dobrica and M. Fillon, Thermohydrodynamic Behavior of a Slider Pocket Bearing, Journal of Tribology, vol.128, issue.2, pp.312-318, 2006.
DOI : 10.1115/1.2162914

S. Xiong and J. Q. Wang, Steady-State Hydrodynamic Lubrication Modeled With the Payvar-Salant Mass Conservation Model, Journal of Tribology, vol.134, issue.3, 2012.
DOI : 10.1115/1.4006615

S. Pei, S. Ma, H. Xu, F. Wang, and Y. Zhang, A multiscale method of modeling surface texture in hydrodynamic regime, Tribology International, vol.44, issue.12, pp.1810-1818, 2011.
DOI : 10.1016/j.triboint.2011.07.005

S. Cupillard, S. Glavatskih, and M. J. Cervantes, Computational fluid dynamics analysis of a journal bearing with surface texturing, Proceedings of the Institution of Mechanical Engineers, pp.97-107, 2008.
DOI : 10.1243/13506501JET319

T. Nanbu, N. Ren, Y. Yasuda, . Zhu, and J. Q. Wang, Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion, Tribology Letters, vol.100, issue.3, pp.241-252, 2008.
DOI : 10.1007/s11249-008-9302-9

G. Bayada and J. B. Faure, A Double Scale Analysis Approach of the Reynolds Roughness Comments and Application to the Journal Bearing, Journal of Tribology, vol.111, issue.2, pp.323-330, 1989.
DOI : 10.1115/1.3261917

G. Bayada, S. Martin, and C. Vazquez, An Average Flow Model of the Reynolds Roughness Including a Mass-Flow Preserving Cavitation Model, Journal of Tribology, vol.127, issue.4, pp.793-802, 2005.
DOI : 10.1115/1.2005307
URL : https://hal.archives-ouvertes.fr/hal-00008082

G. Bayada, S. Martin, and C. Vasquez, Micro-roughness effects in (elasto)hydrodynamic lubrication including a mass-flow preserving cavitation model, Tribology International, vol.39, issue.12, pp.1707-1718, 2006.
DOI : 10.1016/j.triboint.2006.03.003
URL : https://hal.archives-ouvertes.fr/hal-00008355

G. C. Buscaglia, I. Ciuperca, and M. Jai, Homogenization of the transient Reynolds equation, Asymptotic Analysis, vol.32, pp.131-152, 2002.

G. C. Buscaglia and M. Jai, Homogenization of the Generalized Reynolds Equation for Ultra-Thin Gas Films and Its Resolution by FEM, Journal of Tribology, vol.126, issue.3, pp.547-552, 2004.
DOI : 10.1115/1.1739410

G. C. Buscaglia, I. Ciuperca, and M. Jai, The Effect of Periodic Textures on the Static Characteristics of Thrust Bearings, Journal of Tribology, vol.127, issue.4, pp.899-902, 2005.
DOI : 10.1115/1.2033896

G. C. Buscaglia, I. Ciuperca, and M. Jai, On the optimization of surface textures for lubricated contacts, Journal of Mathematical Analysis and Applications, vol.335, issue.2, pp.1309-1327, 2007.
DOI : 10.1016/j.jmaa.2007.02.051

C. H. Venner and A. A. Lubrecht, Numerical Analysis of the Influence of Waviness on the Film Thickness of a Circular EHL Contact, Journal of Tribology, vol.118, issue.1, pp.153-161, 1996.
DOI : 10.1115/1.2837071

C. H. Venner and A. A. Lubrecht, Amplitude Reduction of Non-Isotropic Harmonic Patterns in Circular EHL Contacts, under Pure Rolling, Tribol. Ser, vol.36, pp.151-162, 1999.
DOI : 10.1016/S0167-8922(99)80037-6

R. Ausas, P. Ragot, J. Leiva, M. Jai, G. Bayada et al., The Impact of the Cavitation Model in the Analysis of Microtextured Lubricated Journal Bearings, Journal of Tribology, vol.129, issue.4, pp.868-875, 2007.
DOI : 10.1115/1.2768088
URL : https://hal.archives-ouvertes.fr/hal-00378155

K. Zarbane, Etude numérique et expérimentale du comportement d'un film lubrifiant soumis à un chargement périodique, Thèse de doctorat, 2009.

J. Gehannin, Analyse théorique des amortisseurs à filme fluide fonctionnant à des nombres de Reynolds élevés, Thèse de doctorat, 2009.

L. Gümbel, Verglieich Der Ergebnisse Der rechnerischen Behaudlung des Lagerschmierungsproblem mit neuren Versuchsergebnissen, pp.125-133, 1921.

H. W. Swift, The Stability of Lubricating Film Journal Bearings, Proc. Inst. of Civil Eng, vol.23, pp.267-322, 1932.

W. Stieber, Das Schwimmlager Hydrodynamische Theorie des Geihagers, 1933.

J. D. Knight and A. J. Niewiarowsky, Effects of Two Film Rupture Models on the Thermal Analysis of a Journal Bearing, Journal of Tribology, vol.112, issue.2, pp.183-188, 1990.
DOI : 10.1115/1.2920240

D. Nicolas, Les Paliers Hydrodynamiques Soumis à un Torseur de Forces Quelconques, Thèse de doctorat, 1972.

C. H. Pan, An Improved Short Bearing Analysis for the Submerged Operation of Plain Journal Bearings and Squeeze-Film Dampers, Journal of Lubrication Technology, vol.102, issue.3, pp.320-332, 1980.
DOI : 10.1115/1.3251526

B. Jakobsson and L. Floberg, The Finite Journal Bearing Considering Vaporization, pp.1-116, 0190.

K. O. Olsson, Cavitation in dynamically Loaded Bearing, pp.1-60, 1965.

H. G. Elrod and M. L. Adams, A Computer Program for Cavitation and Starvation Problems Cavitation and Related Phenomena in Lubrication, Proceedings of the 1st Leeds-lyon Symposium on Tribology, pp.37-41, 1975.

H. G. Elrod, A Cavitation Algorithm, Journal of Lubrication Technology, vol.103, issue.3, pp.350-354, 1981.
DOI : 10.1115/1.3251669

D. Dowson, C. M. Taylor, and A. A. Miranda, The Prediction of Liquid Film Journal Bearing Performance with a Consideration of Lubricant Film Reformation: Part 1: Theoretical Results, Proc. Inst, pp.95-102, 0199.
DOI : 10.1243/PIME_PROC_1985_199_099_02

A. A. Miranda, Cavitation and Film Reformation in Journal Bearings Including Interactive Computer-Aided Design Study, 1983.

D. Vijayaraghavan and T. G. Keith, Development and Evaluation of a Cavitation Algorithm, Tribology Transactions, vol.103, issue.2, pp.225-233, 1989.
DOI : 10.1115/1.3261288

D. Vijayaraghavan and T. G. Keith, An Efficient, Robust, and Time Accurate Numerical Scheme Applied to a Cavitation Algorithm, Journal of Tribology, vol.112, issue.1, pp.44-51, 1990.
DOI : 10.1115/1.2920229

P. Payvar and R. F. Salant, A Computational Method for Cavitation in a Wavy Mechanical Seal, Journal of Tribology, vol.114, issue.1, pp.199-204, 1992.
DOI : 10.1115/1.2920861

B. Van, P. G. Ruiji, T. A. , L. Van, H. J. Muijderman et al., Upstream Pumping of Radial Lip Seals by Tangentially Deforming, Rough Seal Surfaces, ASME Journal f Tribology, vol.118, pp.266-275, 1996.

Y. S. Wang, Q. J. Wang, and C. Lin, Mixed Lubrication of Coupled Journal-Thrust-Bearing Systems Including Mass Conserving Cavitation, Journal of Tribology, vol.125, issue.4, pp.748-755, 2003.
DOI : 10.1115/1.1574519

H. Y. To and F. Sadeghi, Groove Effects on Thrust Washer Lubrication, ASME Journal of Tribology, vol.123, pp.295-304, 2001.

M. Hajjam and D. Bonneau, A transient finite element cavitation algorithm with application to radial lip seals, Tribology International, vol.40, issue.8, pp.1258-1269, 2007.
DOI : 10.1016/j.triboint.2007.01.018

F. Sahlin, A. Almqvist, R. Larsson, and S. Glavatskih, A cavitation algorithm for arbitrary lubricant compressibility, Tribology International, vol.40, issue.8, pp.1294-1300, 2007.
DOI : 10.1016/j.triboint.2007.02.009

I. Etsion and L. Burstein, A Model for Mechanical Seals with Regular Microsurface Structure, Tribology Transactions, vol.50, issue.3, pp.677-683, 1996.
DOI : 10.1243/JMES_JOUR_1980_022_016_02

I. Etsion, Y. Kligerman, and G. Halperin, Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces, Tribology Transactions, vol.103, issue.3, pp.511-516, 1999.
DOI : 10.1243/JMES_JOUR_1980_022_053_02

K. Tønder, Dynamics of rough slider bearings: effects of one-sided roughness/waviness, Tribology International, vol.29, issue.2, pp.117-122, 1996.
DOI : 10.1016/0301-679X(95)00095-L

K. Tønder, Inlet roughness tribodevices: dynamic coefficients and leakage, Tribology International, vol.34, issue.12, pp.847-852, 2001.
DOI : 10.1016/S0301-679X(01)00084-6

K. Tønder, Hydrodynamic effects of tailored inlet roughnesses: extended theory, Tribology International, vol.37, issue.2, pp.137-142, 2004.
DOI : 10.1016/S0301-679X(03)00043-4

K. Tønder, Micro- and macro-modifications of pivoted slider bearings: Performance comparison and texturing versus width reduction, Tribology International, vol.44, issue.4, pp.463-467, 2011.
DOI : 10.1016/j.triboint.2010.11.021

P. Bradjic-mitidieri, A. D. Gosman, E. Ioannides, and H. A. Spikes, CFD Analysis of a Low Friction Pocketed Pad Bearing, Journal of Tribology, vol.127, issue.4, pp.803-812, 2005.
DOI : 10.1115/1.2032990

A. V. Olver, M. T. Fowell, H. A. Spikes, and I. G. Pegg, ???Inlet suction???, a load support mechanism in non-convergent, pocketed, hydrodynamic bearings, Proc. Inst, pp.105-108, 2006.
DOI : 10.1243/13506501JET168

M. Fowell, A. V. Olver, A. D. Gosman, H. A. Spikes, and I. Pegg, Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings, Journal of Tribology, vol.129, issue.2, pp.336-345, 2007.
DOI : 10.1115/1.2540089

M. T. Fowell, S. Medina, A. V. Olver, H. A. Spikes, and I. G. Pegg, Parametric study of texturing in convergent bearings, Tribology International, vol.52, pp.7-16, 2013.
DOI : 10.1016/j.triboint.2012.02.013

R. Rahmani, A. Shirvani, and H. Shirvani, Optimization of Partially Textured Parallel Thrust Bearings with Square-Shaped Micro-Dimples, Tribology Transactions, vol.50, issue.3, pp.401-406, 2007.
DOI : 10.1080/10402009908982248

R. Rahmani, I. Mirzee, A. Shirvani, and H. Shirvani, An analytical approach for analysis and optimisation of slider bearings with infinite width parallel textures, Tribology International, vol.43, issue.8, pp.1551-1565, 2010.
DOI : 10.1016/j.triboint.2010.02.016

N. Ren, T. Nanbu, Y. Yasuda, D. Zhu, and Q. Wang, Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns, Tribology Letters, vol.40, issue.1???2, pp.275-285, 2007.
DOI : 10.1007/s11249-007-9271-4

A. Shinkarenko, Y. Kligerman, and I. Etsion, The effect of surface texturing in soft elasto-hydrodynamic lubrication, Tribology International, vol.42, issue.2, pp.284-292, 2009.
DOI : 10.1016/j.triboint.2008.06.008

A. Shinkarenko, Y. Kligerman, and I. Etsion, The Effect of Elastomer Surface Texturing in Soft Elasto-Hydrodynamic Lubrication, Tribology Letters, vol.125, issue.2, pp.95-104, 2009.
DOI : 10.1007/s11249-009-9464-0

Y. Kligerman and A. Shinkarenko, The effect of tapered edges on lubrication regimes in surface-textured elastomer seals, Tribology International, vol.44, issue.12, pp.2059-2066, 2011.
DOI : 10.1016/j.triboint.2011.09.004

M. D. Pascovici, T. Cicone, M. Fillon, and M. B. Dobrica, Analytical investigation of a partially textured parallel slider, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.50, issue.2, pp.151-158, 2009.
DOI : 10.1243/13506501JET470

M. B. Dobrica, M. Fillon, M. D. Pascovici, and T. Cicone, Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.43, issue.8, pp.737-750, 2010.
DOI : 10.1243/13506501JET673

M. Fesanghary and M. M. Khonsari, On Self-Adaptive Surface Grooves, Tribology Transactions, vol.212, issue.6, pp.871-880, 2010.
DOI : 10.1016/j.triboint.2005.09.006

N. Tala-ighil, M. Fillon, and P. Maspeyrot, Effect of textured area on the performances of a hydrodynamic journal bearing, Tribology International, vol.44, issue.3, pp.211-219, 2010.
DOI : 10.1016/j.triboint.2010.10.003

X. Shi and T. Et-ni, Effects of groove textures on fully lubricated sliding with cavitation, Tribology International, vol.44, issue.12, pp.2022-2028, 2011.
DOI : 10.1016/j.triboint.2011.08.018

C. I. Papadopoulos, E. E. Efstathiou, P. G. Nikolakopoulos, and L. Kaiktsis, Geometry Optimization of Textured Three-Dimensional Micro- Thrust Bearings, Journal of Tribology, vol.133, issue.4, p.41702, 2011.
DOI : 10.1115/1.4004990

C. I. Papadopoulos, P. G. Nikolakopoulos, and L. Kaiktsis, Evolutionary Optimization of Micro-Thrust Bearings With Periodic Partial Trapezoidal Surface Texturing, Journal of Engineering for Gas Turbines and Power, vol.133, issue.1, p.12301, 2011.
DOI : 10.1115/1.4001990

H. Wang, S. Yang, and F. Guo, Modeling of a Grooved Parallel Bearing with a Mass-Conserving Cavitation Algorithm, Tribology Transactions, vol.103, issue.2, pp.227-236, 2011.
DOI : 10.1115/1.3176994

A. Fatu, P. Maspeyrot, and M. Hajjam, Wall slip effects in (elasto) hydrodynamic journal bearings, Tribology International, vol.44, pp.868-877, 2011.

T. V. Rao, A. M. Rani, T. Nagarajan, and F. M. Hashim, Analysis of slider and journal bearing using partially textured slip surface, Tribology International, vol.56, pp.121-128, 2012.
DOI : 10.1016/j.triboint.2012.06.010

Y. Qiu and M. M. Khonsari, Performance Analysis of Full-Film Textured Surfaces With Consideration of Roughness Effects, Journal of Tribology, vol.133, issue.2, p.21704, 2011.
DOI : 10.1115/1.4003303

N. Brunetière and B. Tournerie, Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regime, Tribology International, vol.49, pp.80-89, 2012.
DOI : 10.1016/j.triboint.2012.01.003

V. Brizmer and Y. Kligerman, A Laser Surface Textured Journal Bearing, Journal of Tribology, vol.134, issue.3, pp.31702-31703, 2012.
DOI : 10.1115/1.4006511

Y. Fu, J. Ji, and Q. Bi, The Influence of Partially Textured Slider with Oriented Parabolic Grooves on the Behavior of Hydrodynamic Lubrication, Tribology Transactions, vol.31, issue.3, pp.210-217, 2012.
DOI : 10.1146/annurev.fl.11.010179.000343

E. Tomanik, Modelling the hydrodynamic support of cylinder bore and piston rings with laser textured surfaces, Tribology International, vol.59, pp.90-96, 2013.
DOI : 10.1016/j.triboint.2012.01.016

W. Li, L. Stephens, and J. Wenk, Experimental Benchmarking of the Numerical Model of a Radial Lip Seal with a Surface Textured Shaft, Tribology Transactions, vol.129, issue.4, pp.75-87, 2013.
DOI : 10.1080/10402004.2012.727531

D. Bonneau, A. Fatu, and D. Souchet, Paliers hydrodynamiques ? équations, modèles numériques isothermes et lubrification mixte, Editure Lavoisier, 2011.

A. O. Lebeck, Principles and Design of Mechanical Face Seals, 1991.

L. H. Thomas, Elliptic problems in linear difference equations over a network, Watson Sci. Comput. Lab. Rept, 1949.

T. H. Yu and F. Sadeghi, Groove Effects on Thrust Washer Lubrication, Journal of Tribology, vol.123, issue.2, pp.295-304, 2001.
DOI : 10.1115/1.1308014

D. Shen and R. Salant, An unsteady mixed soft EHL model, with application to a rotary lip seal, Tribology International, vol.40, issue.4, pp.646-651, 2007.
DOI : 10.1016/j.triboint.2005.11.011

J. Zhang and Y. Meng, Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured Surfaces, Tribology Letters, vol.124, issue.2, pp.147-158, 2012.
DOI : 10.1007/s11249-012-9935-6

A. Almqvist, E. K. Essel, E. Persson, and P. Wall, Homogenization of the unstationary incompressible Reynolds equation, Tribology International, vol.40, issue.9, pp.1344-1350, 2007.
DOI : 10.1016/j.triboint.2007.02.021

A. R. Gherca, P. Maspeyrot, M. Hajjam, and A. Fatu, Influence of Texture Geometry on the Hydrodynamic Performances of Parallel Bearings, 2012 STLE Annual Meeting & Exhibition, 2012.
DOI : 10.1016/S0020-7403(02)00166-2

A. R. Gherca, P. Maspeyrot, M. Hajjam, and A. Fatu, Numerical Study on the Improvement of the Hydrodynamic Behavior of Parallel Bearings by Surface Texturing, Volume 4: Advanced Manufacturing Processes; Biomedical Engineering; Multiscale Mechanics of Biological Tissues; Sciences, Engineering and Education; Multiphysics; Emerging Technologies for Inspection, 2012.
DOI : 10.1115/ESDA2012-82729

A. R. Gherca, P. Maspeyrot, M. Hajjam, and A. Fatu, Influence of Texture Geometry on the Hydrodynamic Performances of Parallel Bearings, Tribology Transactions, vol.56, issue.3, pp.321-332, 2013.
DOI : 10.1016/S0020-7403(02)00166-2

A. R. Gherca, A. Fatu, M. Hajjam, and P. Maspeyrot, Influence of Surface Geometry on the Hydrodynamic Performances of Parallel Bearings in Transient Flow Conditions, Tribology Transactions, vol.32, issue.2, 2013.
DOI : 10.1080/10402004.2010.536613

D. Bonneau and M. Hajjam, Mod??lisation de la rupture et de la reformation des films lubrifiants dans les contacts ??lastohydrodynamiques, Revue Europ??enne des ??l??ments Finis, vol.122, issue.2, pp.679-704, 2001.
DOI : 10.1080/12506559.2001.9737566

K. J. Bathe, Finite Element Procedures, 1996.

F. Bouyahia, Analyse thermodynamique du comportement des contacts lubrifiés par des fluides non Newtonien ? Application aux butées à patins oscillants, Thèse de doctorat, 2004.

J. Huitric, Contribution à l'étude des joints d'étanchéité à faces radiales rainurées, en présence de fluides compressibles ou incompressibles ; analyse par éléments finis, Thèse de doctorat, 1993.

O. Pinkus and B. Sternlicht, Theory of Hydrodynamic Lubrication, Journal of Applied Mechanics, vol.29, issue.1, pp.56-67, 1961.
DOI : 10.1115/1.3636485