E. A. Abdallah, C. Bouvet, S. Rivallant, B. Broll, and J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.69-1238, 2009.
DOI : 10.1016/j.compscitech.2009.02.029

K. L. Alderson and K. E. Evans, Low velocity transverse impact of filament-wound pipes: Part 1. Damage due to static and impact loads, Composite Structures, vol.20, issue.1, pp.20-37, 1992.
DOI : 10.1016/0263-8223(92)90010-A

G. S. Amrutharaj, K. Y. Lam, and B. Cotterell, Fracture process zone concept and delamination of composite laminates, Theoretical and Applied Fracture Mechanics, vol.24, issue.1, pp.24-57, 1995.
DOI : 10.1016/0167-8442(95)00031-9

J. Awerbuch and M. S. Madhukar, Notched Strength of Composite Laminates: Predictions and Experiments--A Review, Journal of Reinforced Plastics and Composites, vol.4, issue.1, pp.3-159, 1985.
DOI : 10.1177/073168448500400102

L. Ballere, P. Viot, J. L. Lataillade, L. Guillaumat, and S. Cloutet, Damage tolerance of impacted curved panels, International Journal of Impact Engineering, vol.36, issue.2, pp.36-243, 2009.
DOI : 10.1016/j.ijimpeng.2008.03.004
URL : https://hal.archives-ouvertes.fr/hal-00548164

S. Barre and M. L. Benzeggagh, On the use of acoustic-emission to investigate damage mechanisms in glass-fiber-reinforced polypropylene: Composites Science and Technology, pp.52-369, 1994.

M. H. Beheshty and B. Harris, A constant-life model of fatigue behaviour for carbon-fibre composites: The effect of impact damage: Composites Science and Technology, pp.58-67, 1998.

J. P. Berro-ramirez, Caractérisation et modélisation de l'endommagement des composites bobinés Application de prédiction de l'éclatement des réservoirs bobinés hyperbares, Thèse de l'Ecole Nationale, 2013.

M. Bertin, Fatigue thermomécanique de multicouches polymère/composite, Thèse de l'Ecole Nationale Supérieure de Mécanique et d, 2011.

J. Bohse, Acoustic emission characteristics of micro-failure processes in polymer blends and composites, Composites Science and Technology, vol.60, issue.8, pp.60-1213, 2000.
DOI : 10.1016/S0266-3538(00)00060-9

E. Buckingham, On Physically Similar Systems; Illustrations of the Use of Dimensional Equations, Physical Review, vol.4, issue.4, pp.345-376, 1914.
DOI : 10.1103/PhysRev.4.345

P. P. Camanho and C. G. Davila, Mixed-mode decohesion finite elements for the simulation of delamination in composite materials, pp.2002-211737, 2002.

P. P. Camanho, P. Maimi, and C. G. Davila, Prediction of size effects in notched laminates using continuum damage mechanics, Composites Science and Technology, vol.67, issue.13, pp.67-2715, 2007.
DOI : 10.1016/j.compscitech.2007.02.005
URL : https://hal.archives-ouvertes.fr/hal-00498983

W. J. Cantwell, P. T. Curtis, and J. Morton, Impact and subsequent fatigue damage growth in carbon-fiber laminates, International Journal of Fatigue, issue.6, pp.113-118, 1984.

D. E. Carlucci and S. S. Jacobson, Ballistics, theory and design of guns and ammunition, 2007.

J. F. Caron, R. P. Carreira, and A. D. Diaz, Criterion of delamination initiation in composite laminates: Comptes Rendus De L Academie Des Sciences Serie Ii Fascicule B-Mecanique Physique Astronomie, pp.327-1291, 1999.

F. Chang and K. Chang, A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.21, issue.9, pp.834-855, 1987.
DOI : 10.1177/002199838702100904

F. Chang and L. B. Lessard, Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings: Part I--Analysis, Journal of Composite Materials, vol.25, issue.1, pp.2-43, 1991.
DOI : 10.1177/002199839102500101

Z. Q. Cheng and R. C. Batra, Exact Eshelby Tensor for a Dynamic Circular Cylindrical Inclusion, Journal of Applied Mechanics, vol.66, issue.2, pp.66-563, 1999.
DOI : 10.1115/1.2791087

A. P. Christoforou and S. R. Swanson, Strength Loss in Composite Cylinders Under Impact, Journal of Engineering Materials and Technology, vol.110, issue.2, pp.110-180, 1988.
DOI : 10.1115/1.3226028

T. W. Coats and C. E. Harris, A Progressive Damage Methodology for Residual Strength Predictions of Notched Composite Panels, Journal of Composite Materials, vol.33, issue.23, pp.33-2193, 1999.
DOI : 10.1177/002199839903302303

F. Cottet, M. Boustie, and T. Deresseguier, Analysis of spallation in ductile and brittle materials subjected to pulsed laser-induced shock-waves, Journal De Physique Iii, issue.1, pp.581-587, 1991.

J. Curtis, M. J. Hinton, S. Li, S. R. Reid, and P. D. Soden, Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasistatic indentation, Composites Part B-Engineering, pp.31-419, 2000.

F. Daghia, E. Abisset, and P. Ladevèze, Modélisation des composites stratifiés jusqu'à rupture : rôle des mécanismes élémentaires et leurs interactions, 17èmes Journées Nationales sur les Composites (JNC17), 2011.

M. De-freitas and L. Reis, Failure mechanisms on composite specimens subjected to compression after impact, Composite Structures, vol.42, issue.4, pp.42-365, 1998.
DOI : 10.1016/S0263-8223(98)00081-6

P. J. Degroot, P. A. Wijnen, and R. B. Janssen, Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon epoxy composites: Composites Science and Technology, pp.55-405, 1995.

E. Fuoss, P. V. Straznicky, and C. Poon, Effects of stacking sequence on the impact resistance in composite laminates ??? Part 1: parametric study, Composite Structures, vol.41, issue.1, pp.41-67, 1998.
DOI : 10.1016/S0263-8223(98)00036-1

E. Fuoss, P. V. Straznicky, and C. Poon, Effects of stacking sequence on the impact resistance in composite laminates. Part 2: prediction method, Composite Structures, vol.41, issue.2, pp.41-177, 1998.
DOI : 10.1016/S0263-8223(98)00037-3

C. Garnier, M. L. Pastor, B. Lorrain, and O. Pantale, Fatigue behavior of impacted composite structures, Composite Structures, vol.100, pp.443-450, 2013.
DOI : 10.1016/j.compstruct.2012.12.025

B. Gentilleau, Modélisation et validation expérimentale du comportement thermomécanique de multicouches polymère/composite bobiné : Application au stockage d'hydrogène hyperbare, Thèse de l'Ecole Nationale, 2012.

J. J. Gerharz, A. Schopfel, and H. Huth, Correlation between material properties and damage tolerance behavior of composite structure, International Committee on Aeronautical Fatigue : Durability and structural integrity of airframes, 1993.

M. Giordano, A. Calabro, C. Esposito, A. D. Amore, and L. Nicolais, An acoustic-emission characterization of the failure modes in polymer-composite materials, Composites Science and Technology, vol.58, issue.12, pp.58-1923, 1998.
DOI : 10.1016/S0266-3538(98)00013-X

P. B. Gning, M. Tarfaoui, F. Collombet, L. Riou, and P. Davies, Damage development in thick composite tubes under impact loading and influence on implosion pressure: experimental observations, Composites Part B: Engineering, vol.36, issue.4, pp.36-306, 2005.
DOI : 10.1016/j.compositesb.2004.11.004

S. R. Hallett, B. G. Green, W. G. Jiang, and M. R. Wisnom, An experimental and numerical investigation into the damage mechanisms in notched composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.5, pp.40-613, 2009.
DOI : 10.1016/j.compositesa.2009.02.021

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.47-329, 1980.
DOI : 10.1115/1.3153664

Z. Hashin and A. Rotem, A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, vol.7, issue.4, pp.448-464, 1973.
DOI : 10.1177/002199837300700404

V. Herb, G. Couegnat, and E. Martin, Damage assessment of thin SiC/SiC composite plates subjected to quasi-static indentation loading, Composites Part A: Applied Science and Manufacturing, vol.41, issue.11, pp.41-1677, 2010.
DOI : 10.1016/j.compositesa.2010.08.004

C. Hochard, N. Lahellec, and C. Bordreuil, A ply scale non-local fibre rupture criterion for CFRP woven ply laminated structures, Composite Structures, vol.80, issue.3, pp.80-321, 2007.
DOI : 10.1016/j.compstruct.2006.05.021
URL : https://hal.archives-ouvertes.fr/hal-00106920

C. Hochard, J. Payan, and C. Bordreuil, A progressive first ply failure model for woven ply CFRP laminates under static and fatigue loads, International Journal of Fatigue, vol.28, issue.10, pp.28-1270, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.024
URL : https://hal.archives-ouvertes.fr/hal-00106918

S. Huguet, Applications de classificateurs aux données d'émission acoustique : identification de la signature acoustique des mécaniques d'endommagement dans les composites de matrice polymère, Thèse de l'Institut national des Sciences Appliquées, 2002.

B. P. Jang, W. Kowbel, and B. Z. Jang, Impact behavior and impact-fatigue testing of polymer composites, Composites Science and Technology, vol.44, issue.2, pp.44-107, 1992.
DOI : 10.1016/0266-3538(92)90103-A

M. Kadlec, Failure mechanism and strain fields on a carbon/epoxy composite subjected to compression after impact: Engineering Mechanics, pp.263-266, 2011.

G. Kamgaing, Conception et caractérisation mécanique des pièces en matériaux composites moulées par compression, 2013.

B. L. Karihaloo and D. Fu, A damage-based constitutive law for plain concrete in tension: European Journal of Mechanics a-Solids, pp.373-384, 1989.

M. Kashtalyan and C. Soutis, Analysis of composite laminates with intra- and interlaminar damage, Progress in Aerospace Sciences, vol.41, issue.2, pp.41-152, 2005.
DOI : 10.1016/j.paerosci.2005.03.004

M. T. Kortschot and P. W. Beaumont, Damage mechanics of composite materials: II? a damaged-based notched strength model: Composites Science and Technology, pp.39-303, 1990.

M. T. Kortschot and P. W. Beaumont, Damage mechanics of composite materials: I? Measurements of damage and strength: Composites Science and Technology, pp.39-289, 1990.

M. T. Kortschot and P. W. Beaumont, Damage mechanics of composite materials. IV: The effect of lay-up on damage growth and notched strength: Composites Science and Technology, pp.40-167, 1991.

M. T. Kortschot, P. W. Beaumont, and M. F. Ashby, Damage mechanics of composite materials. III: Prediction of damage growth and notched strength: Composites Science and Technology, pp.40-147, 1991.

P. Krawczak, Réservoirs haute pression en composites: Techniques de l'ingénieur Applications des composites, v. base documentaire, p.140, 2002.

P. Ladevèze, O. Allix, J. Deü, and D. Lévêque, A mesomodel for localisation and damage computation in laminates, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.1-2, pp.183-105, 2000.
DOI : 10.1016/S0045-7825(99)00214-5

H. J. Langlie, A reliability Test Method for One Shot items Aeronutronic Division, 1962.

I. Lapczyk and J. A. Hurtado, Progressive damage modeling in fiber-reinforced materials, Composites Part A: Applied Science and Manufacturing, vol.38, issue.11, pp.38-2333, 2007.
DOI : 10.1016/j.compositesa.2007.01.017

F. Laurin, N. Carrere, and J. F. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites Part A: Applied Science and Manufacturing, vol.38, issue.1, pp.38-198, 2007.
DOI : 10.1016/j.compositesa.2006.01.018

F. Laurin, N. Carrere, and J. F. Maire, Laminated composite structures subjected to compressive loading: A material and structural buckling analysis, Composite Structures, vol.80, issue.2, pp.80-172, 2007.
DOI : 10.1016/j.compstruct.2006.04.074

F. Lecuyer and D. Engrand, A methodology for the identification of a criterion for delaminantion initiation, p.8, 1992.

H. K. Lee and B. R. Kim, Numerical characterization of compressive response and damage evolution in laminated plates containing a cutout, Composites Science and Technology, vol.67, issue.11-12, pp.67-2221, 2007.
DOI : 10.1016/j.compscitech.2007.01.031

H. K. Lee and S. Simunovic, A damage constitutive model of progressive debonding in aligned discontinuous fiber composites, International Journal of Solids and Structures, vol.38, issue.5, pp.38-875, 2001.
DOI : 10.1016/S0020-7683(00)00060-3

J. D. Lee, Three dimensional finite element analysis of damage accumulation in composite laminate, Computers & Structures, issue.15, pp.335-350, 1982.

C. C. Liang, H. W. Chen, and C. H. Wang, Optimum design of dome contour for filamentwound composite pressure vessels based on a shape factor: Composite Structures, pp.58-469, 2002.

Z. Liang, H. K. Lee, and W. Suaris, Micromechanics-based constitutive modeling for unidirectional laminated composites, International Journal of Solids and Structures, vol.43, issue.18-19, pp.43-5674, 2006.
DOI : 10.1016/j.ijsolstr.2005.08.020

A. Likas, N. Vlassis, and J. J. Verbeek, The global k-means clustering algorithm, Pattern Recognition, vol.36, issue.2, pp.451-461, 2003.
DOI : 10.1016/S0031-3203(02)00060-2
URL : https://hal.archives-ouvertes.fr/inria-00321493

P. F. Liu and J. Y. Zheng, Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics, Materials Science and Engineering: A, vol.485, issue.1-2, pp.485-711, 2008.
DOI : 10.1016/j.msea.2008.02.023

C. S. Lopes, P. P. Camanho, Z. Gurdal, P. Maimi, and E. V. Gonzalez, Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations: Composites Science and Technology, pp.69-937, 2009.

C. S. Lopes, O. Seresta, Y. Coquet, Z. Gurdal, P. P. Camanho et al., Low-velocity impact damage on dispersed stacking sequence laminates. Part I: Experiments: Composites Science and Technology, pp.69-926, 2009.
DOI : 10.1016/j.compscitech.2009.02.009

E. Mader, E. Moos, and J. Karger-kocsis, Role of film formers in glass fibre reinforced polypropylene ??? new insights and relation to mechanical properties, Composites Part A: Applied Science and Manufacturing, vol.32, issue.5, pp.32-631, 2001.
DOI : 10.1016/S1359-835X(00)00156-1

J. F. Maire and J. L. Chaboche, A new formulation of continuum damage mechanics (CDM) for composite materials, Aerospace Science and Technology, vol.1, issue.4, pp.247-257, 1997.
DOI : 10.1016/S1270-9638(97)90035-3

L. Marcin, M. Genet, E. Baranger, and P. Ladevèze, Vers la tolérance au dommage pour les CMCs : prédiction de la durée de vie de structures, 17èmes Journées Nationales sur les Composites (JNC17), 2011.

A. Matzenmiller, J. Lubliner, and R. L. Taylor, A constitutive model for anisotropic damage in fiber-composites, Mechanics of Materials, vol.20, issue.2, pp.125-152, 1995.
DOI : 10.1016/0167-6636(94)00053-0

S. Mechsaoui, S. Benmedakhene, S. Amami, and A. Laksimi, Damage and crack analysis of glass/epoxy composite laminated, 2005.

S. Miot, C. Hochard, and N. Lahellec, A non-local criterion for modelling unbalanced woven ply laminates with stress concentrations, Composite Structures, vol.92, issue.7, pp.92-1574, 2010.
DOI : 10.1016/j.compstruct.2009.11.019
URL : https://hal.archives-ouvertes.fr/hal-00476699

O. O. Ochoa and J. J. Engblom, Analysis of progressive failure in composites, Composites Science and Technology, vol.28, issue.2, pp.28-87, 1987.
DOI : 10.1016/0266-3538(87)90092-3

P. Peyre, C. Carboni, P. Forget, G. Beranger, C. Lemaitre et al., Influence of thermal and mechanical surface modifications induced by laser shock processing on the initiation of corrosion pits in 316L stainless steel, Journal of Materials Science, vol.46, issue.7, pp.42-6866, 2007.
DOI : 10.1007/s10853-007-1502-4

P. Prombut, Caractérisation de la propagation de délaminage des stratifiés composites multidirectionnels, Thèse de l, 2007.

Y. Qian and S. R. Swanson, Experimental measurement of impact response in carbon/epoxy plates, AIAA Journal, vol.28, issue.6, pp.1069-1074, 1990.
DOI : 10.2514/3.25168

J. Renard and A. Thionnet, Damage in composites: From physical mechanisms to modelling: Composites Science and Technology, pp.642-646, 2006.

N. Revest, Comportement en fatigue de pièces épaisses en matériaux composites, Thèse de l'École Nationale Supérieure des Mines de, 2011.

G. Romhany, J. Karger-kocsis, and T. Czigany, Tensile fracture and failure behavior of technical flax fibers, Journal of Applied Polymer Science, vol.31, issue.277, pp.90-3638, 2003.
DOI : 10.1002/app.13110

J. Rousseau, D. Perreux, and N. Verdiere, The influence of winding patterns on the damage behaviour of filament-wound pipes, Composites Science and Technology, vol.59, issue.9, pp.59-1439, 1999.
DOI : 10.1016/S0266-3538(98)00184-5

A. Sollier, Etude des plasmas générés par interaction laser ? matière en regime confine, application au traitement des matériaux par choc ? laser, 2002.

L. H. Strait, M. L. Karasek, and M. F. Amateau, Effects of Stacking Sequence on the Impact Resistance of Carbon Fiber Reinforced Thermoplastic Toughened Epoxy Laminates, Journal of Composite Materials, vol.20, issue.6, pp.26-1725, 1992.
DOI : 10.1177/002199839202601202

D. D. Symons and G. Davis, Fatigue testing of impact-damaged T300/914 carbon-fibrereinforced plastic: Composites Science and Technology, pp.60-379, 2000.

V. Tita, J. De-carvalho, and D. Vandepitte, Failure analysis of low velocity impact on thin composite laminates: Experimental and numerical approaches, Composite Structures, vol.83, issue.4, pp.83-413, 2008.
DOI : 10.1016/j.compstruct.2007.06.003

A. T. Tran, Etude du délaminage en mode II de composite unidirectionnels soumis à des sollicitations rapides : Approche globale et approche locale, Thèse de l'Ecole Nationale Supérieure d'Arts et Métiers, 2011.

J. Tweed, R. Lee, and J. Mccarthy, Impact evaluation of stressed composites, European Conference on Composites Testing and Standarlisation, pp.8-10, 1992.

P. Viot, L. Ballere, L. Guillaumat, and J. Lataillade, Scale effects on the response of composite structures under impact loading, Engineering Fracture Mechanics, vol.75, issue.9, pp.75-2725, 2008.
DOI : 10.1016/j.engfracmech.2007.03.001
URL : https://hal.archives-ouvertes.fr/hal-01011272

S. Wakayama, S. Kobayashi, T. Imai, and T. Matsumoto, Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiber, Composites Part A: Applied Science and Manufacturing, vol.37, issue.11, pp.37-2002, 2006.
DOI : 10.1016/j.compositesa.2005.12.010

J. M. Whitney and R. J. Nuismer, Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.221, issue.3, pp.253-265, 1974.
DOI : 10.1177/002199837400800303

Q. D. Yang and B. Cox, Cohesive models for damage evolution in laminated composites, International Journal of Fracture, vol.57, issue.122, pp.107-137, 2005.
DOI : 10.1007/s10704-005-4729-6

X. Zhang, G. A. Davies, and D. Hitchings, Impact damage with compressive preload and post-impact compression of carbon composite plates, International Journal of Impact Engineering, vol.22, issue.5, pp.22-485, 1999.
DOI : 10.1016/S0734-743X(99)00003-2

Y. Zhang, Z. Xia, and F. Ellyin, Two-scale analysis of a filament-wound cylindrical structure and application of periodic boundary conditions, International Journal of Solids and Structures, vol.45, issue.20, pp.45-5322, 2008.
DOI : 10.1016/j.ijsolstr.2008.05.026

Y. H. Zhao and G. J. Weng, Plasticity of a two-phase composite with partially debonded inclusions, International Journal of Plasticity, vol.12, issue.6, pp.12-781, 1996.
DOI : 10.1016/S0749-6419(96)00029-0

G. Zhou, Effect of impact damage on residual compressive strength of glass-fibre reinforced polyester (GFRP) laminates, Composites Structures 35, pp.171-181, 1996.