X. Buch and M. Shanahan, Thermal and thermo-oxidative ageing of an epoxy adhesive, Polymer Degradation and Stability, vol.68, issue.3, pp.403-411, 2000.
DOI : 10.1016/S0141-3910(00)00028-8

T. Tsotsis, S. Keller, J. Bardis, and J. Bish, Preliminary evaluation of the use of elevated pressure to accelerate thermo-oxidative aging in composites, Polymer Degradation and Stability, vol.64, issue.2, pp.207-212, 1999.
DOI : 10.1016/S0141-3910(98)00190-6

G. Tandon, K. Pochiraju, and G. Schoeppner, Modeling of oxidative development in PMR-15 resin, Polymer Degradation and Stability, vol.91, issue.8, pp.1861-1869, 2006.
DOI : 10.1016/j.polymdegradstab.2005.11.008

X. Colin and J. Verdu, Strategy for studying thermal oxidation of organic matrix composites, Composites Science and Technology, vol.65, issue.3-4, pp.411-419, 2005.
DOI : 10.1016/j.compscitech.2004.09.011
URL : https://hal.archives-ouvertes.fr/hal-00110952

K. Pochiraju and G. Tandon, Modeling Thermo-Oxidative Layer Growth in High-Temperature Resins, Journal of Engineering Materials and Technology, vol.128, issue.1, pp.107-116, 2006.
DOI : 10.1115/1.2128427

K. Pochiraju and G. Tandon, Interaction of oxidation and damage in high temperature polymeric matrix composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.12, pp.1931-1940, 2009.
DOI : 10.1016/j.compositesa.2009.03.010

X. Colin, A. Mavel, C. Marais, and J. Verdu, Interaction between Cracking and Oxidation in Organic Matrix Composites, Journal of Composite Materials, vol.39, issue.15, pp.1371-1389, 2005.
DOI : 10.1177/0021998305050430
URL : https://hal.archives-ouvertes.fr/hal-00110949

G. Tandon, K. Pochiraju, and G. Schoeppner, Thermo-oxidative behavior of high-temperature PMR-15 resin and composites, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, pp.150-161, 2008.
DOI : 10.1016/j.msea.2007.09.103

K. Bowles, J. D. Leonhardt, T. Bors, and D. , Thermal-stability relationships between PMR-15 resin and its composites, Journal of Advanced Materials, vol.26, pp.23-32, 1994.

M. Meador, C. Lowell, P. Cavano, and P. Herrerafierro, On the oxidative degradation of nadic endcapped polyimides .1. Effect of thermocycling on weight loss and crack formation, High Performance Polymers, vol.57, issue.3, pp.363-379, 1996.
DOI : 10.1088/0954-0083/8/3/003

D. Gueribiz, F. Jacquemin, M. Rahmani, S. Freour, and K. Loucif, Modeling of the mechanical loading effects on the effective diffusive behavior of polymer matrix composites, Journal of Reinforced Plastics and Composites, vol.30, issue.4, pp.337-346, 2011.
DOI : 10.1177/0731684410396600

G. Youssef, S. Freour, and F. Jacquemin, Stress-dependent Moisture Diffusion in Composite Materials, Journal of Composite Materials, vol.12, issue.5, pp.1621-1637, 2009.
DOI : 10.1177/0021998309339222
URL : https://hal.archives-ouvertes.fr/hal-01007330

X. Colin, C. Marais, and J. Verdu, Kinetic modelling of the stabilizing effect of carbon fibres on thermal ageing of thermoset matrix composites, Composites Science and Technology, vol.65, issue.1, pp.117-127, 2005.
DOI : 10.1016/j.compscitech.2004.06.009

M. Lafarie-frenot, J. Grandidier, and M. Gigliotti, Thermo-oxidation behaviour of composite materials at high temperatures: A review of research activities carried out within the COMEDI program, Polymer Degradation and Stability, vol.95, issue.6, pp.965-974, 2010.
DOI : 10.1016/j.polymdegradstab.2010.03.019

S. Verdu and J. Verdu, A New Kinetic Model for Polypropylene Thermal Oxidation at Moderate Temperatures, Macromolecules, vol.30, issue.8, pp.2262-2267, 1997.
DOI : 10.1021/ma960627v

X. Colin, C. Marais, and J. Verdu, A new method for predicting the thermal oxidation of thermoset matrices, Polymer Testing, vol.20, issue.7, pp.795-803, 2001.
DOI : 10.1016/S0142-9418(01)00021-6

K. Pochiraju, G. Tandon, and G. Schoeppner, Long-Term Durability of Polymeric Matrix Composites, 2012.
DOI : 10.1007/978-1-4419-9308-3

J. Decelle, N. Huet, and V. Bellenger, Oxidation induced shrinkage for thermally aged epoxy networks, Polymer Degradation and Stability, vol.81, issue.2, pp.239-248, 2003.
DOI : 10.1016/S0141-3910(03)00094-6
URL : https://hal.archives-ouvertes.fr/hal-00113832

X. Colin, Modélisation cinétique de la thermo-oxydation de matériaux polymères et composites à hautes performances thermomécaniques, École Nationale Supérieure d'Arts et Métiers, 2000.

K. Pochiraju, G. Tandon, and G. Schoeppner, Evolution of stress and deformations in high-temperature polymer matrix composites during thermo-oxidative??aging, Mechanics of Time-Dependent Materials, vol.38, issue.1, pp.45-68, 2008.
DOI : 10.1007/s11043-007-9042-5

L. Johnson, R. Eby, and M. Meador, Investigation of oxidation profile in PMR-15 polyimide using atomic force microscope (AFM), Polymer, vol.44, issue.1, pp.187-197, 2003.
DOI : 10.1016/S0032-3861(02)00726-7

L. Olivier, N. Ho, J. Grandidier, and M. Lafarie-frenot, Characterization by ultra-micro indentation of an oxidized epoxy polymer: Correlation with the predictions of a kinetic model of oxidation, Polymer Degradation and Stability, vol.93, issue.2, pp.489-497, 2008.
DOI : 10.1016/j.polymdegradstab.2007.11.012

K. Gillen, R. Clough, and C. Quintana, Modulus profiling of polymers, Polymer Degradation and Stability, vol.17, issue.1, pp.31-47, 1987.
DOI : 10.1016/0141-3910(87)90046-2

R. Clough and K. Gillen, Oxygen diffusion effects in thermally aged elastomers, Polymer Degradation and Stability, vol.38, issue.1, pp.47-56, 1992.
DOI : 10.1016/0141-3910(92)90022-W

J. Wise, K. Gillen, and R. Clough, Quantitative model for the time development of diffusion-limited oxidation profiles, Polymer, vol.38, issue.8, pp.1929-1944, 1997.
DOI : 10.1016/S0032-3861(96)00716-1

L. Chocinski-arnault, L. Olivier, and M. Lafarie-frenot, Effects of thermal oxidation on an epoxy???amine thermoset studied by mechanical spectroscopy, Materials Science and Engineering: A, vol.521, issue.522, pp.521-522287, 2009.
DOI : 10.1016/j.msea.2008.09.083

N. Ho, Endommagements de composites carbone/époxy induits par la thermo-oxydation de la matrice en présence de contraintes mécaniques, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, 2006.

N. Rasoldier, C. X. Verdu, and J. , Model systems for thermo-oxidised epoxy composite matrices, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1522-1529, 2008.
DOI : 10.1016/j.compositesa.2008.05.016
URL : https://hal.archives-ouvertes.fr/hal-00320015

A. Schieffer, J. Maire, and D. Leveque, A coupled analysis of mechanical behaviour and ageing for polymer-matrix composites, Composites Science and Technology, vol.62, issue.4, pp.543-549, 2002.
DOI : 10.1016/S0266-3538(01)00146-4

M. Gigliotti, L. Olivier, Q. Dinh, J. Grandidier, and M. Lafarie-frenot, Local shrinkage and stress induced by thermo-oxidation in composite materials at high temperatures, Journal of the Mechanics and Physics of Solids, vol.59, issue.3, pp.696-712, 2011.
DOI : 10.1016/j.jmps.2010.12.001

E. Ahci and R. Talreja, Characterization of viscoelasticity and damage in high temperature polymer matrix composites, Composites Science and Technology, vol.66, issue.14, pp.2506-2519, 2006.
DOI : 10.1016/j.compscitech.2006.02.012

K. Jayaraman, K. Reifsnider, and R. Swain, Elastic and thermal effects in the interphase .1. comments on characterization methods, Journal of Composites Technology & Research, vol.15, pp.3-13, 1993.

K. Jayaraman, K. Reifsnider, and R. Swain, Elastic and thermal effects in the interphase .2. comments on modeling studies, Journal of Composites Technology & Research, vol.15, pp.14-22, 1993.

N. Anifantis, Micromechanical stress analysis of closely packed fibrous composites, Composites Science and Technology, vol.60, issue.8, pp.1241-1248, 2000.
DOI : 10.1016/S0266-3538(00)00061-0

G. Papanicolaou, M. Michalopoulou, and N. Anifantis, Thermal stresses in fibrous composites incorporating hybrid interphase regions, Composites Science and Technology, vol.62, issue.14, pp.1881-1894, 2002.
DOI : 10.1016/S0266-3538(02)00103-3

G. Wacker, A. Bledzki, and A. Chate, Effect of interphase on the transverse Young's modulus of glass/epoxy composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.5-6, pp.619-626, 1998.
DOI : 10.1016/S1359-835X(97)00116-4

F. Yang and R. Pitchumani, A kinetics model for interphase formation in thermosetting matrix composites, Journal of Applied Polymer Science, vol.125, issue.12, pp.3220-3236, 2003.
DOI : 10.1002/app.12437

G. Palmese, Origin and Influence of Interphase Material Property Gradients in Thermosetting Composites, 1991.

Y. Ko, W. Forsman, and T. Dziemianowicz, Carbon fiber-reinforced composites: Effect of fiber surface on polymer properties, Polymer Engineering and Science, vol.7, issue.13, pp.805-814, 1982.
DOI : 10.1002/pen.760221304

D. Arayasantiparb, S. Mcknight, and M. Libera, Compositional variation within the epoxy/adherend interphase, Journal of Adhesion Science and Technology, vol.71, issue.12, pp.1463-1484, 2001.
DOI : 10.1163/156856101753213312

L. Drzal, The effect of polymeric matrix mechanical properties on the fiber-matrix interfacial shear strength, Materials Science and Engineering: A, vol.126, issue.1-2, pp.289-293, 1990.
DOI : 10.1016/0921-5093(90)90135-P

L. Drzal, The role of the fiber-matrix interphase on composite properties, Vacuum, vol.41, issue.7-9, pp.1615-1618, 1990.
DOI : 10.1016/0042-207X(90)94034-N

M. Madhukar and L. Drzal, Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: II. Longitudinal (0??) and Transverse (90??) Tensile and Flexure Behavior of Graphite/Epoxy Composites, Journal of Composite Materials, vol.16, issue.8, pp.958-991, 1991.
DOI : 10.1177/002199839102500802

A. Garton and J. Daly, Characterization of the aramid: Epoxy and carbon: Epoxy interphases, Polymer Composites, vol.16, issue.4, pp.195-200, 1985.
DOI : 10.1002/pc.750060403

A. Garton, W. Stevenson, and S. Wang, Interfacial reactions in carbon-epoxy composites, British Polymer Journal, vol.60, issue.5, pp.459-467, 1987.
DOI : 10.1002/pi.4980190507

S. Subramanian, J. Lesko, K. Reifsnider, and W. Stinchcomb, Characterization of the Fiber-Matrix Interphase and its Influence on Mechanical Properties of Unidirectional Composites, Journal of Composite Materials, vol.30, issue.3, pp.309-332, 1996.
DOI : 10.1177/002199839603000302

F. Fisher and L. Brinson, Viscoelastic interphases in polymer???matrix composites: theoretical models and finite-element analysis, Composites Science and Technology, vol.61, issue.5, pp.731-748, 2001.
DOI : 10.1016/S0266-3538(01)00002-1

K. Liu, M. Vanlandingham, and T. Ovaert, Mechanical characterization of soft viscoelastic gels via indentation and optimization-based inverse finite element analysis, Journal of the Mechanical Behavior of Biomedical Materials, vol.2, issue.4, pp.355-363, 2009.
DOI : 10.1016/j.jmbbm.2008.12.001

H. Tsai, A. Arocho, and L. Gause, Prediction of fiber-matrix interphase properties and their influence on interface stress, displacement and fracture toughness of composite material, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, pp.295-304, 1990.
DOI : 10.1016/0921-5093(90)90136-Q

C. Tsui, C. Tang, and T. Lee, Finite element analysis of polymer composites filled by interphase coated particles, Journal of Materials Processing Technology, vol.117, issue.1-2, pp.105-110, 2001.
DOI : 10.1016/S0924-0136(01)01117-7

D. Vu, M. Gigliotti, and M. Lafarie-frenot, Experimental characterization of thermo-oxidation-induced shrinkage and damage in polymer???matrix composites, Composites Part A: Applied Science and Manufacturing, vol.43, issue.4, pp.577-586, 2012.
DOI : 10.1016/j.compositesa.2011.12.018

K. Jin, J. Oh, and S. Ha, Effect of Fiber Arrangement on Residual Thermal Stress Distributions in a Unidirectional Composite, Journal of Composite Materials, vol.41, issue.5, pp.591-611, 2007.
DOI : 10.1177/0021998306065290

D. Vu, Endommagements Induits par la Thermo Oxydation dans les Composites Carbone/Epoxy Unidirectionnels et Stratifiés, Ecole Nationale Superieure de Mécanique et d'Aérotechnique, 2011.

G. Tandon and W. Ragland, Influence of laminate lay-up on oxidation and damage growth: Isothermal aging, Composites Part A: Applied Science and Manufacturing, vol.42, issue.9, pp.1127-1137, 2011.
DOI : 10.1016/j.compositesa.2011.04.018

M. Lafarie-frenot, Damage mechanisms induced by cyclic ply-stresses in carbon???epoxy laminates: Environmental effects, International Journal of Fatigue, vol.28, issue.10, pp.1202-1216, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.014

M. Lafarie-frenot and N. Ho, Influence of free edge intralaminar stresses on damage process in CFRP laminates under thermal cycling conditions, Composites Science and Technology, vol.66, issue.10, pp.1354-1365, 2006.
DOI : 10.1016/j.compscitech.2005.09.006

K. Garrett and J. Bailey, Multiple transverse fracture in 90??? cross-ply laminates of a glass fibre-reinforced polyester, Journal of Materials Science, vol.3, issue.1, pp.157-168, 1977.
DOI : 10.1007/BF00738481

K. Reifsnider, Fatigue behavior of composite materials, International Journal of Fracture, vol.12, issue.6, pp.563-583, 1980.
DOI : 10.1007/BF02265218

N. Takeda and S. Ogihara, In situ observation and probabilistic prediction of microscopic failure processes in CFRP cross-ply laminates, Composites Science and Technology, vol.52, issue.2, pp.183-195, 1994.
DOI : 10.1016/0266-3538(94)90204-6

N. Takeda and S. Ogihara, Initiation and growth of delamination from the tips of transverse cracks in CFRP cross-ply laminates, Composites Science and Technology, vol.52, issue.3, pp.309-318, 1994.
DOI : 10.1016/0266-3538(94)90166-X

S. Ogihara, N. Takeda, and A. Kobayashi, Experimental characterization of microscopic failure process under quasi-static tension in interleaved and toughness-improved CFRP cross-ply laminates, Composites Science and Technology, vol.57, issue.3, pp.267-275, 1997.
DOI : 10.1016/S0266-3538(96)00118-2

D. Vu, M. Gigliotti, and M. Lafarie-frenot, The effect of thermo-oxidation on matrix cracking of cross-ply [0/90]S composite laminates, Composites Part A: Applied Science and Manufacturing, vol.44, pp.114-121, 2013.
DOI : 10.1016/j.compositesa.2012.08.013

A. Krasnikovs and J. Varna, Transverse cracks in cross-ply laminates. 1. Stress analysis, Mechanics of Composite Materials, vol.2, issue.No. 7, pp.565-582, 1997.
DOI : 10.1007/BF02269616

Y. Han, H. Hahn, and R. Croman, A simplified analysis of transverse ply cracking in cross-ply laminates, Composites Science and Technology, vol.31, issue.3, pp.165-177, 1988.
DOI : 10.1016/0266-3538(88)90008-5

J. Lee and I. Daniel, Progressive Transverse Cracking of Crossply Composite Laminates, Journal of Composite Materials, vol.24, issue.11, pp.1225-1243, 1990.
DOI : 10.1177/002199839002401108

J. Berthelot, P. Leblond, A. Elmahi, and J. Lecorre, Transverse cracking of cross-ply laminates: Part 1. Analysis, Composites Part A: Applied Science and Manufacturing, vol.27, issue.10, pp.989-1001, 1996.
DOI : 10.1016/1359-835X(96)80002-A

J. Nairn, Fracture Mechanics of Composites With Residual Thermal Stresses, Journal of Applied Mechanics, vol.64, issue.4, pp.804-810, 1997.
DOI : 10.1115/1.2788985

J. Nairn and D. Mendels, On the use of planar shear-lag methods for stress-transfer analysis of multilayered composites, Mechanics of Materials, vol.33, issue.6, pp.335-362, 2001.
DOI : 10.1016/S0167-6636(01)00056-4

S. Ciutacu, P. Budrugeac, and I. Niculae, Accelerated thermal aging of glass-reinforced epoxy resin under oxygen pressure, Polymer Degradation and Stability, vol.31, issue.3, pp.365-372, 1991.
DOI : 10.1016/0141-3910(91)90044-R

G. Tandon, E. Ripberger, and G. Schoeppner, Accelerated aging of PMR-15 resin at elevated pressure and/or temperature, Proceedings of the SAMPE 2005 symposium and exhibition, 2005.

T. Tsotsis, S. Keller, K. Lee, J. Bardis, and J. Bish, Aging of polymeric composite specimens for 5000 hours at elevated pressure and temperature, Composites Science and Technology, vol.61, issue.1, pp.75-86, 2001.
DOI : 10.1016/S0266-3538(00)00196-2

T. Tsotsis and S. Lee, Long-term thermo-oxidative aging in composite materials: Failure mechanisms, Composites Science and Technology, vol.58, issue.3-4, pp.355-368, 1998.
DOI : 10.1016/S0266-3538(97)00123-1

A. Astruc, P. Bartolomeo, B. Fayolle, L. Audouin, and J. Verdu, Accelerated oxidative ageing of polypropylene fibers in aqueous medium under high oxygen pressure as studied by thermal analysis, Polymer Testing, vol.23, issue.8, pp.919-923, 2004.
DOI : 10.1016/j.polymertesting.2004.05.002

L. Olivier, Prévision du vieillissement thermo-oxydant de composites à matrice organique dédiés à l'aéronautique : Prise en compte des couplages multiphysiques, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, 2008.

V. Tvergaard and A. Needleman, Polymer indentation: Numerical analysis and comparison with a spherical cavity model, Journal of the Mechanics and Physics of Solids, vol.59, issue.9, pp.1669-1684, 2011.
DOI : 10.1016/j.jmps.2011.06.006

W. Oliver and G. Pharr, Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, Journal of Materials Research, vol.522, issue.01, pp.3-20, 2004.
DOI : 10.1557/JMR.1992.0618

G. Kermouche, J. Loubet, and J. Bergheau, Extraction of stress???strain curves of elastic???viscoplastic solids using conical/pyramidal indentation testing with application to polymers, Mechanics of Materials, vol.40, issue.4-5, pp.271-283, 2008.
DOI : 10.1016/j.mechmat.2007.08.003

G. Rauchs, J. Bardon, and D. Georges, Identification of the material parameters of a viscous hyperelastic constitutive law from spherical indentation tests of rubber and validation by tensile tests, Mechanics of Materials, vol.42, issue.11, pp.961-973, 2010.
DOI : 10.1016/j.mechmat.2010.08.003

G. Rauchs, J. Bardon, L. Van-breemen, T. Engels, C. Pelletier et al., Identification of elasto-viscoplastic material properties from indentation testing using an inverse method. Surface Effects and Contact Mechanics Ix (2009) 127-138. 81 Numerical simulation of flat-tip micro-indentation of glassy polymers: Influence of loading speed and thermodynamic state, Philosophical Magazine, vol.89, pp.677-696, 2009.

L. Govaert, P. Timmermans, and W. Brekelmans, The Influence of Intrinsic Strain Softening on Strain Localization in Polycarbonate: Modeling and Experimental Validation, Journal of Engineering Materials and Technology, vol.122, issue.2, pp.177-185, 2000.
DOI : 10.1115/1.482784

T. Tervoort, E. Klompen, and L. Govaert, A multi???mode approach to finite, three???dimensional, nonlinear viscoelastic behavior of polymer glasses, Journal of Rheology, vol.40, issue.5, pp.779-797, 1996.
DOI : 10.1122/1.550755

T. Tervoort, R. Smit, W. Brekelmans, L. Govaert, H. Van-melick et al., A Constitutive Equation for the Elasto- Viscoplastic Deformation of Glassy Polymers Mechanics of Time-Dependent Materials A micro-indentation method for probing the craze-initiation stress in glassy polymers, Polymer, vol.1, issue.44, pp.269-2912481, 1997.

G. Sell, C. , and J. J. , Determination of the plastic behaviour of solid polymers at constant true strain rate, Journal of Materials Science, vol.15, issue.6, pp.583-591, 1979.
DOI : 10.1007/BF00772717

N. Huber and C. Tsakmakis, Finite deformation viscoelasticity laws, Mechanics of Materials, vol.32, issue.1, pp.1-18, 2000.
DOI : 10.1016/S0167-6636(99)00045-9

A. Leonov, Nonequilibrium thermodynamics and rheology of viscoelastic polymer media, Rheologica Acta, vol.14, issue.2, pp.85-98, 1976.
DOI : 10.1007/BF01517499

E. Arruda and M. Boyce, Evolution of plastic anisotropy in amorphous polymers during finite straining, International Journal of Plasticity, vol.9, issue.6, pp.697-720, 1993.
DOI : 10.1016/0749-6419(93)90034-N

E. Arruda, M. Boyce, and L. Jean, Elastic-Viscoplastic Deformation of Polymers, Handbook of Materials Behavior Models, pp.398-407, 2001.
DOI : 10.1016/B978-012443341-0/50043-0

E. Arruda and M. Boyce, A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, Journal of the Mechanics and Physics of Solids, vol.41, issue.2, pp.389-412, 1993.
DOI : 10.1016/0022-5096(93)90013-6
URL : https://hal.archives-ouvertes.fr/hal-01390807

M. Boyce, D. Parks, and A. Argon, Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model, Mechanics of Materials, vol.7, issue.1, pp.15-33, 1988.
DOI : 10.1016/0167-6636(88)90003-8

S. Karra and K. Rajagopal, Modeling the non-linear viscoelastic response of high temperature polyimides, Mechanics of Materials, vol.43, issue.1, pp.54-61, 2011.
DOI : 10.1016/j.mechmat.2010.09.006

S. Karra and K. Rajagopal, Development of three dimensional constitutive theories based on lower dimensional experimental data, Applications of Mathematics, vol.54, issue.2, pp.147-176, 2009.
DOI : 10.1007/s10492-009-0010-z

A. Desimone, J. Marigo, and L. Teresi, A damage mechanics approach to stress softening and its application to rubber, European Journal of Mechanics - A/Solids, vol.20, issue.6, pp.873-892, 2001.
DOI : 10.1016/S0997-7538(01)01171-8

J. Simo, On a fully three-dimensional finite-strain viscoelastic damage model: Formulation and computational aspects, Computer Methods in Applied Mechanics and Engineering, vol.60, issue.2, pp.153-173, 1987.
DOI : 10.1016/0045-7825(87)90107-1

V. Tvergaard and A. Needleman, An analysis of thickness effects in the Izod test, International Journal of Solids and Structures, vol.45, issue.14-15, pp.3951-3966, 2008.
DOI : 10.1016/j.ijsolstr.2008.02.024

B. Lindgreen, V. Tvergaard, and A. Needleman, Dynamic neck development in a polymer tube under internal pressure loading, International Journal of Solids and Structures, vol.45, issue.2, pp.580-592, 2008.
DOI : 10.1016/j.ijsolstr.2007.08.005

P. Glansdorff and I. Prigogine, Structure, stability and fluctuations, 1971.

A. Mulliken and M. Boyce, Mechanics of the rate-dependent elastic???plastic deformation of glassy polymers from low to high strain rates, International Journal of Solids and Structures, vol.43, issue.5, pp.1331-1356, 2006.
DOI : 10.1016/j.ijsolstr.2005.04.016

R. Bishop and N. Mott, The theory of indentation and hardness tests, Proceedings of the Physical Society of London, pp.147-159, 1945.
DOI : 10.1088/0959-5309/57/3/301

K. Johnson, The correlation of indentation experiments, Journal of the Mechanics and Physics of Solids, vol.18, issue.2, pp.115-126, 1970.
DOI : 10.1016/0022-5096(70)90029-3

G. Maugin, The thermodynamics of nonlinear irreversible behaviors ? an introduction, World Scientific, 1999.

C. Cunat, The DNLR approach and relaxation phenomena. Part I -Historical account and DNLR formalism, Sandia National Laboratories. Dakota Ver. 5.2, pp.39-65, 2001.
DOI : 10.1023/A:1009899519935

J. Diani, B. Fayolle, and P. Gilormini, A review on the Mullins effect, European Polymer Journal, vol.45, issue.3, pp.601-612, 2009.
DOI : 10.1016/j.eurpolymj.2008.11.017
URL : https://hal.archives-ouvertes.fr/hal-00773015

A. Drozdov, Mullins??? effect in semicrystalline polymers, International Journal of Solids and Structures, vol.46, issue.18-19, pp.3336-3345, 2009.
DOI : 10.1016/j.ijsolstr.2009.05.001

D. Hanson, M. Hawley, and R. Houlton, Stress softening experiments in silica-filled polydimethylsiloxane provide insight into a mechanism for the Mullins effect, Polymer, vol.46, issue.24, pp.10989-10995, 2005.
DOI : 10.1016/j.polymer.2005.09.039

Y. Zhang, Z. Xia, and F. Ellyin, Nonlinear viscoelastic micromechanical analysis of fibre-reinforced polymer laminates with damage evolution, International Journal of Solids and Structures, vol.42, issue.2, pp.591-604, 2005.
DOI : 10.1016/j.ijsolstr.2004.06.021

X. Colin and J. Verdu, Thermal ageing and lifetime prediction for organic matrix composites, Plastics, Rubber and Composites, vol.2, issue.8-9, pp.349-356, 2003.
DOI : 10.1177/002199838201600201
URL : https://hal.archives-ouvertes.fr/hal-00112481

Y. Nawab, F. Jacquemin, and P. Casari, Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates, Composites Part B: Engineering, vol.50, pp.144-149, 2013.
DOI : 10.1016/j.compositesb.2013.02.002
URL : https://hal.archives-ouvertes.fr/hal-01154412

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , The effect of thermo-oxidation on the mechanical behaviour of polymer epoxy materials, Polymer Testing, vol.32, issue.6, pp.1020-1028, 2013.
DOI : 10.1016/j.polymertesting.2013.05.009

@. Gigliotti, M. Pannier, Y. Minervino, M. Lafarie-frenot, M. Corigliano et al., The effect of a thermo-oxidative environment on the behaviour of multistable [0/90] unsymmetric composite plates, Composite Structures, vol.106, pp.863-872, 2013.
DOI : 10.1016/j.compstruct.2013.07.016

@. Gigliotti, M. Minervino, M. Lafarie-frenot, M. Grandidier, and J. , Predicting loss of bifurcation behaviour of 0/90 unsymmetric composite plates subjected to environmental loads, Composite Structures, vol.94, issue.9, pp.2793-2808, 2012.
DOI : 10.1016/j.compstruct.2012.03.017

@. Minervino, M. Gigliotti, and M. , On the behaviour of isotropic and orthotropic plates under double bending moment, International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), pp.18-20, 2012.

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , Identification of the thermo-oxidative affected material properties of polymers for high temperature applications by a coupled experimental/numerical approach, 15th European Conference on Composite Materials (ECCM 15), pp.24-28, 2012.

@. Minervino, M. Gigliotti, M. Chocinski-arnault, L. Lafarie-frenot, M. Grandidier et al., Thermo-oxidative affected material properties of organic matrix materials for high temperature applications, 10th International Conference on Durability of Composite Systems, pp.17-19, 2012.

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , Identification des propriétés de résine vierges et oxydés -par l'intermédiaire des essais d'Ultra Micro Indentation, pp.29-31, 2012.

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , Onset of fibre/matrix debonding on the surface of organic matrix composites due to thermo-oxidation, 9th International Conference on Composite Science and Technology (ICSST/9), pp.24-26, 2013.

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , Polymer mechanical properties evolution during thermal aging; a coupled numerical/experimental approach, pp.18-33, 2013.

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , The employment of 0/90 unsymmetric plates for the characterisation of the thermo-oxidation behaviour of composite materials at high temperatures, pp.17-32, 2011.

@. Minervino, M. Gigliotti, M. Lafarie-frenot, M. Grandidier, and J. , Effets de la thermo oxydation sur les propriétés mécaniques des composites a matrice organique, pp.21-25, 2013.