S. Adanur and T. Et-liao, 3D modeling of textile composite preforms Composites Part B: Engineering, pp.787-793, 1998.

E. Ahci and R. Et-talreja, Characterization of viscoelasticity and damage in high temperature polymer matrix Composites Science and Technology, pp.2506-2519, 2006.

R. Akkerman, Laminate mechanics for balanced woven fabrics, Composites Part B: Engineering, vol.37, issue.2-3, pp.108-116, 2006.
DOI : 10.1016/j.compositesb.2005.08.004

C. Albert and G. Et-fernlund, Spring-in and warpage of angled composite laminates Composites Science and Technology, pp.1895-1912, 2002.

S. Angioni, M. Meo, and A. Et-foreman, A comparison of homogenization methods for 2-D woven composites, Composites Part B: Engineering, vol.42, issue.2, pp.181-189, 2011.
DOI : 10.1016/j.compositesb.2010.10.004

M. Ansar, W. Xinwei, and Z. Et-chouwei, Modeling strategies of 3D woven composites: A review Composite Structures, pp.1947-1963, 2011.

P. Badel, Analyse mésoscopique du comportement mécanique des renforts tissés de composites utilisant la tomographie aux rayons X Thèse de Doctorat, Institut national des sciences appliquées de Lyon, 2008.

P. Badel, E. Vidal-salle, and P. Et-boisse, Computational determination of in-plane shear mechanical behaviour of textile composite reinforcements, Computational Materials Science, vol.40, issue.4, pp.439-448, 2007.
DOI : 10.1016/j.commatsci.2007.01.022
URL : https://hal.archives-ouvertes.fr/hal-00380799

P. Badel, S. Gauthier, E. Vidal-salle, and P. Et-boisse, Rate constitutive equations for computational analyses of textile composite reinforcement mechanical behaviour during forming Composites Part A: Applied Science and Manufacturing, pp.997-1007, 2009.

P. Badel, E. Vidal-sallé, E. Maire, and P. Et-boisse, Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale Composites Science and Technology, pp.2433-2440, 2008.

P. Badel, E. Vidal-salle, and P. Et-boisse, Large deformation analysis of fibrous materials using rate constitutive equations Computers & Structures, pp.1164-1175, 2008.

G. Bai and . In, situ damage monitoring of woven composite materials during simple mechanical tests Tesi Di Laurea, 2012.

D. Balageas, J. Krapez, and P. Et-cielo, Pulsed photothermal modeling of layered materials, Journal of Applied Physics, vol.59, issue.2, pp.348-357, 1986.
DOI : 10.1063/1.336690

M. Bannister, Challenges for composite into the next millenium -a reinforcement perspective Composites, pp.901-910, 2001.

S. Barre and M. Et-benzeggagh, On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene Composites Science and Technology, pp.369-376, 1994.

L. Bateup, A. Long, R. Mcllhagger, B. Lewin, N. Ridge et al., Advances in the manufacture of 3-D preform reinforcement for advanced structural composites in aerospace -a mission to the USA Rapport DTI (Department of Trade and Industry) and NCN, National Composites Network), vol.4, 2006.

J. Baucom and M. Et-zikry, Low-velocity impact damage progression in woven Eglass composite systems Composites: Part A, pp.658-664, 2005.

P. Boisse, A. Gasser, and G. Hivet, Analyses of fabric tensile behaviour: determination of the biaxial tension-strain surfaces and their use in forming simulations Composites Part A: Applied Science and Manufacturing, pp.1395-1414, 2001.

P. Boisse, B. Zouari, and J. L. Daniel, Importance of in-plane shear rigidity in finite element analyses of woven fabric composite preforming Composites Part A: Applied Science and Manufacturing, pp.2201-2212, 2006.

E. Bouazzaoui, Caractérisation de l'endommagement anisotrope par métrologie ultrasonore Application à un matériau composite industriel, 1994.

S. K. Boyd and R. Muller, Smooth surface meshing for automated finite element model generation from 3D image data, Journal of Biomechanics, vol.39, issue.7, pp.1287-1295, 2006.
DOI : 10.1016/j.jbiomech.2005.03.006

H. Brinkman, A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles, Flow, Turbulence and Combustion, vol.15, issue.1, pp.27-34, 1947.
DOI : 10.1002/andp.19063240204

P. Callus, A. Mouritz, M. Bannister, and K. Et-leong, Tensile properties and failure mechanisms of 3D woven composites Composites Part A: Applied Science and Manufacturing, pp.1277-1287, 1999.

P. Carman, Fluid Flow through Granular Beds Transactions of the Institution of Chemical Engineers, 1937.

R. Chandra, S. Singh, and K. Et-gupta, Micromechanical damping models for fiber-reinforced composites: a comparative study Composites Part A: Applied Science and Manufacturing, pp.787-796, 2002.

A. Charmetant, E. Vidal-salle, and P. Et-boisse, Hyperelastic modelling for mesoscopic analyses of composite reinforcements Composites Science and Technology, pp.1623-1631, 2011.

B. Chen and T. W. Et-chou, Compaction of woven-fabric preforms in liquid composite molding processes: single-layer deformation Composites Science and Technology, pp.1519-1526, 1999.

B. Chen and T. W. Et-chou, Compaction of woven-fabric preforms: nesting and multi-layer deformation Composites Science and Technology, pp.2223-2231, 2000.

B. Chen, E. J. Lang, and T. W. Chou, Experimental and theoretical studies of fabric compaction behavior in resin transfer molding Materials Science and Engineering: A, pp.188-196, 2001.

V. Chiaruttini, F. Feyel, C. , and J. L. , A robust meshing algorithm for complex 3D crack growth simulations, IV European Conference on Computational Mechanics, 2010.

M. Choi, M. Lee, J. Chang, and S. Et-lee, Permeability modeling of fibrous media in composite processing Journal of Non-Newtonian Fluid Mechanics, pp.585-598, 1998.

S. Chou, H. Chen, and C. Et-wu, BMI Resin composites reinforced with 3D carbon-fibre fabrics Composites Science and Technology, pp.117-128, 1992.

K. Chung and H. Et-ryou, Development of viscoelastic/rate-sensitive-plastic constitutive law for fiber-reinforced composites and its applications. Part I: Theory and material characterization, Composites Science and Technology, vol.69, issue.2, pp.284-291, 2007.
DOI : 10.1016/j.compscitech.2007.06.003

B. Cox, Handbook of analytical methods for textile composites Rapport technique, 1997.

B. Cox, M. Dadkhah, and W. Et-morris, On the tensile failure of 3D woven composites Composites: Part A, pp.447-458, 1996.

B. Cox, M. Dadkhah, W. Morris, and J. Et-flintoff, Failure mechanisms of 3D woven composites in tension, compression, and bending Acta Metallurgica et Materiala, pp.3967-3984, 1994.

S. Daggumati, I. De-baere, W. Van-paepegem, J. Degrieck, J. Xu et al., Local damage in a 5-harness satin weave composite under static tension: Part I - Experimental analysis Composites Science and Technology, pp.1926-1933, 2010.

S. Daggumati, W. Van-paepegem, J. Degrieck, J. Xu, S. Lomov et al., Local damage in a 5-harness satin weave composite under static tension: Part II -Meso-FE modelling Composites Science and Technology, pp.1934-1941, 2010.

I. Daniel, J. Luo, and P. Et-schubel, Three-dimensional characterization of textile composites Composites Part B: Engineering, pp.13-19, 2008.

A. Dasgupta and R. Et-agarwal, Orthotropic Thermal Conductivity of Plain-Weave Fabric Composites Using a Homogenization Technique, Journal of Composite Materials, vol.14, issue.3, pp.2736-2758, 1992.
DOI : 10.1177/002199839202601806

V. Dayal and V. Et-kinra, Leaky Lamb waves in an anisotropic plate. II: Nondestructive evaluation of matrix cracks in fiber-reinforced composites, The Journal of the Acoustical Society of America, vol.89, issue.4, pp.1590-1598, 1991.
DOI : 10.1121/1.401017

D. Carvalho, N. V. Pinho, S. T. Et-robinson, and P. , Numerical modelling of woven composites: Biaxial loading Composites Part A: Applied Science and Manufacturing, pp.1326-1337, 2012.

D. Carvalho, N. Pinho, S. Et-robinson, and P. , Reducing the domain in the mechanical analysis of periodic structures, with application to woven composites Composites Science and Technology, pp.969-979, 2011.

E. De-luycker, F. Morestin, P. Boisse, and D. Et-marsal, Simulation of 3D interlock composite preforming Composite Structures, pp.615-623, 2009.

D. Durville, Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, International Journal of Material Forming, vol.49, issue.7???8, pp.1241-1251, 2010.
DOI : 10.1007/s12289-009-0674-7
URL : https://hal.archives-ouvertes.fr/hal-00495110

E. Hage and C. , Modélisation du comportement élastique endommageable de matériaux composites à renfort tridimensionnel Thèse de Doctorat, 2006.

N. Ersoy, T. Garstka, K. Potter, R. Wisnom, D. Porter et al., Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite Composites Part A: Applied Science and Manufacturing, pp.410-418, 2010.

J. Favre, Residual thermal stresses in fibre reinforced composite materials -A review, Journal of Mechanical Behaviour of Materials, vol.1, pp.37-53, 1988.

R. Fournier, Optimisation et modélisation du procédé RTM Thèse de Doctorat, 2003.

F. Gao, L. Boniface, S. Ogin, P. Smith, and R. Et-greaves, Damage accumulation in woven fabric CFRP laminates under tensile loading. Part 1: Observations of damage accumulation Composites Science and Technology, pp.123-136, 1999.

A. Gasser, P. Boisse, and S. Et-hanklar, Mechanical behaviour of dry fabric reinforcements, 3D simulations versus biaxial tests Computational Materials Science, pp.7-20, 2000.

S. Gatouillat, Approche mésoscopique pour la mise en forme des renforts tissés de composites Thèse de Doctorat, Institut National des Sciences Appliquées de Lyon, 2010.

B. Gebart, Permeability of Unidirectional Reinforcements for RTM, Journal of Composite Materials, vol.7, issue.8, pp.1100-1133, 1992.
DOI : 10.1177/002199839202600802

M. Giordano, A. Calabro, C. Esposito, A. Et-nicolais, and L. , An acoustic-emission characterization of the failure modes in polymer-composite materials Composites Science and Technology, pp.1923-1928, 1998.

E. H. Glaessgen, C. M. Pastore, O. H. Griffin, and A. Et-birger, Geometrical and finite element modelling of textile composites Composites Part B: Engineering, pp.43-50, 1996.

L. Gorbatikh, D. S. Ivanov, S. Lomov, and I. Et-verpoest, On modelling of damage evolution in textile composites on meso-level via property degradation approach Composites Part A: Applied Science and Manufacturing, pp.2433-2442, 2007.

Y. Gowayed, The effect of voids on the elastic properties of textile reinforced composites, Journal of Composite Technology and Research, vol.19, issue.3, pp.168-173, 1997.

G. Grail, M. Hirsekorn, N. Carrere, G. Hivet, and R. Et-hambli, Chaîne multimodèle : lien entre paramètres matériaux, procédés et performances de structures composites à renfort tissé Revue des Composites et des Matériaux Avancés, pp.79-93, 2011.

M. Grujicic, K. M. Chittajallu, and S. Walsh, Effect of shear, compaction and nesting on permeability of the orthogonal plain-weave fabric preforms, Materials Chemistry and Physics, vol.86, issue.2-3, pp.358-369, 2004.
DOI : 10.1016/j.matchemphys.2004.03.015

B. Hagège, Simulation du comportement mévanique des milieux fibreux en grandes transformations : application aux renforts tricotes Thèse de Doctorat, Ecole Nationale Supérieure d'Arts et Métiers, 2004.

S. Hanklar, Modélisation mécanique et numérique du comportement des tissus de fibres

J. Hearle and W. Et-shanahan, An energy method for calculations in fabric mechanics The Journal of the Textile Institute, pp.81-110, 1978.

G. Hivet, Modélisation mésoscopique pour le comportement bi-axial et la mise en forme des renforts de compostes tisses Thèse de Doctorat, 2003.

G. Hivet and P. Et-boisse, Consistent 3D geometrical model of fabric elementary cell Application to a meshing preprocessor for 3D finite element analysis Finite Elements in Analysis and Design, pp.25-49, 2005.

C. Hochard, L. Lahellec, and C. Et-bordreuil, A ply scale non-local fibre rupture criterion for CFRP woven ply laminated structures Composite Structures, pp.321-326, 2007.

C. Hochard, S. Miot, N. Lahellec, F. Mazerolle, M. Herman et al., Behaviour up to rupture of woven ply laminate structures under static loading conditions Composites Part A: Applied Science and Manufacturing, pp.1017-1023, 2009.

J. Hofstee and F. Van-keulen, 3-D geometric modeling of a draped woven fabric Composite Structures, pp.179-195, 2001.

D. Ivanov, S. Ivanov, S. Lomov, and I. Et-verpoest, Strain mapping analysis of textile composites, Optics and Lasers in Engineering, vol.47, issue.3-4, pp.360-370, 2009.
DOI : 10.1016/j.optlaseng.2008.05.013

C. Jochum, J. Grandidier, and M. Et-smaali, Proposal for a long-fibre microbuckling scenario during the cure of a thermosetting matrix Composites Part A: Applied Science and Manufacturing, pp.19-28, 2008.

S. John, I. Herszberg, and F. Et-coman, Longitudinal and transverse damage taxonomy in woven composite components, Composites Part B: Engineering, vol.32, issue.8, pp.659-668, 2001.
DOI : 10.1016/S1359-8368(01)00047-6

S. Kawabata, M. Niwa, and H. Et-kawai, The finite-deformation theory of plain-weave fabrics. Part I : The biaxial deformation theory The Journal of the Textile Institute, pp.21-46, 1973.

A. Kemp, An extension of peirce's cloth geometry to the treatment of nonlinear threads The Journal of the Textile Institute, pp.44-48, 1958.

H. Kim and C. Et-swan, Algorithms for automated meshing and unit cell analysis of periodic composites with hierarchical tri-quadratic tetrahedral elements, International Journal for Numerical Methods in Engineering, vol.39, issue.11, pp.1683-1711, 2003.
DOI : 10.1002/nme.828

H. Kim and C. Et-swan, Voxel-based meshing and unit-cell analysis of textile composites, International Journal for Numerical Methods in Engineering, vol.40, issue.7, pp.977-1006, 2003.
DOI : 10.1002/nme.594

J. Kim, J. Lee, H. Kim, S. Kim, and D. Et-lee, Reduction of residual stresses in thick-walled composite cylinders by smart cure cycle with cooling and reheating Composite Structures, pp.261-266, 2006.

Y. Kim and I. Daniel, Cure Cycle Effect on Composite Structures Manufactured by Resin Transfer Molding, Journal of Composite Materials, vol.32, issue.14, pp.1725-1743, 2002.
DOI : 10.1177/0021998302036014598

J. Kuhn and P. Et-charalambides, Modeling of Plain Weave Fabric Composite Geometry, Journal of Composite Materials, vol.14, issue.9, pp.188-220, 1999.
DOI : 10.1177/002199839903300301

P. Ladeveze and E. Et-le-dantec, Damage modelling of the elementary ply for laminated composites Composites Science and Technology, pp.257-267, 1992.

P. Lapeyronnie, L. Grognec, P. Binétruy, C. Et-boussu, and F. , Homogenization of the elastic behavior of a layer-to-layer angle-interlock composite Composite Structures, pp.2795-2807, 2011.

E. Larve, D. Mollenhauer, E. Zhou, T. Breitzman, and T. Whitney, Independent mesh method-based prediction of local and volume average fields in textile composites, Composites: Part A, vol.40, pp.1880-1890, 2009.

L. Lee, S. Rudov-clark, A. Mouritz, and M. Bannister, et Herszberg I. Effect of weaving damage on the tensile properties of three-dimensional woven composites Composite Structures, pp.405-413, 2002.

C. Li, K. Potter, and M. Et-wisnom, In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method Composites Science and Technology, pp.55-64, 2004.

H. Lin, M. Sherburn, J. Crookston, A. Long, M. Clifford et al., Finite Element modelling of fabric compression Modelling and Simulation in, Materials Science and Engineering, vol.16, 2008.

S. Lo and W. Wang, Finite element mesh generation over intersecting curved surfaces by tracing of neighbours Finite Elements in Analysis and Design, pp.351-370, 2005.

F. Loix, P. Badel, L. Orgeas, C. Geindreau, P. Et-boisse et al., Woven fabric permeability: From textile deformation to fluid flow mesoscale simulations Composites Science and Technology Virtual textile: Simulation of the internal geometry and mechanical properties TULiberec Summer school, pp.1624-1630, 2004.

S. V. Lomov, A. V. Gusakov, G. Huysmans, and A. Prodromou, et Verpoest I. Textile geometry preprocessor for meso-mechanical models of woven composites Composites Science and Technology, pp.2083-2095, 2000.

S. V. Lomov, D. S. Ivanov, T. C. Truong, I. Verpoest, F. Baudry et al., Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test Composites Science and Technology, pp.2340-2349, 2008.

S. V. Lomov and I. Verpoest, Compression of Woven Reinforcements: A Mathematical Model, Journal of Reinforced Plastics and Composites, vol.69, issue.16, pp.1329-1351, 2000.
DOI : 10.1106/50RF-DQJ7-9RN3-6CPX

S. V. Lomov and I. Verpoest, Model of shear of woven fabric and parametric description of shear resistance of glass woven reinforcements Composites Science and Technology, pp.919-933, 2006.

S. Lomov, A. Bogdanovich, D. Ivanov, D. Mungalov, and M. Karahan, A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: Materials, methods and principal results, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1134-1143, 2009.
DOI : 10.1016/j.compositesa.2009.03.012

S. Lomov, D. Ivanov, I. Verpoest, M. Zako, T. Kurashiki et al., Meso-FE modelling of textile composites: Road map, data flow and algorithms Composites Science and Technology, pp.1870-1891, 2007.

S. Lomov, I. Verpoest, T. Peeters, D. Roose, and M. Et-zako, Nesting in textile laminates: geometrical modelling of the laminate Composites Science and Technology, pp.993-1007, 2003.

M. Svanberg, J. Et-anders-holmberg, and J. , Prediction of shape distortions Pat I: FE-implementation of a path dependent constitutive model Composites Part A: Applied Science and Manufacturing, pp.711-721, 2004.

L. Marcin, Modélisation du comportement, de l'endommagement, et de la rupture des matériaux composites à renforts tissés pour le dimensionnement robuste de structures Thèse de Doctorat, 2009.

A. R. Melro, P. P. Camanho, A. Pires, F. M. Et-pinho, and S. T. , Numerical simulation of the non-linear deformation of 5-harness satin weaves, Computational Materials Science, vol.61, pp.116-126, 2012.
DOI : 10.1016/j.commatsci.2012.04.010

Y. Miao, E. Zhou, Y. Wang, and B. A. Et-cheeseman, Mechanics of textile composites: Micro-geometry Composites Science and Technology, pp.1671-1678, 2008.

J. Morvan, Comportement anélastique des matériaux composites à matrice céramique Thèse de Doctorat, 1997.

A. Mouritz, M. Bannister, P. Falzon, and K. Et-leong, Review of applications for advanced three-dimensional fibre textile composites Composites: Part A, pp.1444-1461, 1999.

N. Naik and V. Et-ganesh, An analytical method for plain weave fabric composites, Composites, vol.26, issue.4, pp.281-289, 1995.
DOI : 10.1016/0010-4361(95)93671-6

P. Nedvanov and S. Et-advani, A Method to Determine 3D Permeability of Fibrous Reinforcements, Journal of Composite Materials, vol.36, 2002.

M. Olave, A. Vanaerschot, S. V. Lomov, and D. Et-vandepitte, Internal geometry variability of two woven composites and related variability of the stiffness Polymer Composites, 2012.

L. Onal and S. Et-adanur, Modeling of elastic, thermal, and strength/failure analysis of two-dimensional woven composites -a review Applied Mechanics Reviews, pp.37-49, 2007.

S. Pandita and I. Et-verpoest, Prediction of the tensile stiffness of weft knitted fabric composites based on X-ray tomography images Composites Science and Technology, pp.311-325, 2003.

J. Pearson, M. Zikry, M. Prabhugoud, and K. Et-peters, Global-local Assessment of Low-velocity Impact Damage in Woven Composites, Journal of Composite Materials, vol.19, issue.8, pp.2759-2783, 2007.
DOI : 10.1177/0021998307078734

F. Peirce, The geometry of cloth structure The Journal of the Textile Institute, pp.45-96, 1937.

J. Perie, H. Leclerc, S. Roux, and . Et, Digital image correlation and biaxial test on composite material for anisotropic damage law identification, International Journal of Solids and Structures, vol.46, issue.11-12, pp.2388-2396, 2009.
DOI : 10.1016/j.ijsolstr.2009.01.025
URL : https://hal.archives-ouvertes.fr/hal-00355838

B. Piezel, B. Mercatoris, W. Trabelsi, L. Laiarinandrasana, A. Thionnet et al., Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE Composite Structures, pp.2343-2357, 2012.

M. Pindera, H. Khatam, A. Drago, and Y. Bansal, Micromechanics of spatially uniform heterogeneous media: A critical review and emerging approaches, Composites Part B: Engineering, vol.40, issue.5, pp.349-378, 2009.
DOI : 10.1016/j.compositesb.2009.03.007

P. Potluri and T. V. Et-sagar, Compaction modelling of textile preforms for composite structures Composite Structures, pp.177-185, 2008.

E. Potter, S. Pinho, P. Robinson, L. Iannucci, and A. Et-mcmillan, Mesh generation and geometrical modelling of 3D woven composites with variable tow cross-sections, Computational Materials Science, vol.51, issue.1, pp.103-111, 2012.
DOI : 10.1016/j.commatsci.2011.06.034

W. Prosser and M. Et-gorman, Plate mode velocities in graphite/epoxy plates, The Journal of the Acoustical Society of America, vol.96, issue.2, pp.902-907, 1994.
DOI : 10.1121/1.410265

N. Rabearison, C. Jochum, and J. Et-grandidier, A FEM coupling model for properties prediction during the curing of an epoxy matrix Computational Materials Science, pp.715-724, 2009.

F. Robitaille, B. Clayton, A. Long, B. Souter, and C. Et-rudd, Geometric modelling of industrial preforms: Woven and braided textiles, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, vol.213, issue.2, pp.69-84, 1999.
DOI : 10.1177/146442079921300201

F. Robitaille, B. Clayton, A. Long, B. Souter, and C. Et-rudd, Geometric modelling of industrial preforms: Warp-knitted and multiple layer textiles, Journal of Materials: Design and Applications, vol.214, pp.71-90, 2000.

F. Robitaille, A. Long, and C. Et-rudd, Geometric modelling of textiles for prediction of composite processing and performance characteristics, Plastics, Rubber and Composites, vol.29, issue.6, pp.66-75, 2002.
DOI : 10.1016/S1359-8368(96)00067-4

S. Rudov-clark, A. Mouritz, L. Lee, . Et, and M. Bannister, Fibre damage in the manufacture of advanced three-dimensional woven composites Composites: Part A, pp.963-970, 2003.

D. Ruprecht and H. Et-müller, Livre A Scheme for Edge based adaptative, Tetrahedron, 1994.

J. Schell, M. Renggli, G. Van-lenthe, R. Muller, and P. Et-ermanni, Micro-computed tomography determination of glass fibre reinforced polymer meso-structure Composites Science and Technology, pp.1348-1353, 2006.

J. Schneider, L. Marcin, and Z. Aboura, Experimental investigation and behavior modeling of a 3D interlock woven fabric composite

D. Scida, Z. Aboura, and M. Et-benzeggagh, The effect of ageing on the damage events in woven-fibre composite materials under different loading conditions Composites Science and Technology, pp.551-557, 2002.

D. Scida, Z. Aboura, M. L. Benzeggagh, and E. Et-bocherens, Prediction of the elastic behaviour of hybrid and non-hybrid woven composites Composites Science and Technology, pp.1727-1740, 1998.

M. Seale, B. Smith, and W. Et-prosser, Lamb wave assessment of fatigue and thermal damage in composites, The Journal of the Acoustical Society of America, vol.103, issue.5, pp.2416-2424, 1998.
DOI : 10.1121/1.422761

K. Searles, G. Odegard, and M. Et-kumosa, Micro-and mesomechanics of 8-harness satin woven fabric composites: I -evaluation of elastic behavior Composites Part A: Applied Science and Manufacturing, pp.1627-1655, 2001.

M. Sherburn, Geometric and Mechanical Modelling of Textiles Thèse de Doctorat, 2007.

P. Shrotriya and N. Et-sottos, Viscoelastic response of woven composite substrates Composites Science and Technology, pp.621-634, 2005.

J. Snyder, Generative Modeling for Computer Graphics and CAD Academic Press, 1992.

P. D. Soden, M. J. Hinton, and A. S. Et-kaddour, Lamina properties, lay-up configurations and loading conditions for a range of fibrereinforced composite laminates Composites Science and Technology, pp.1011-1022, 1998.

F. Stig and S. Et-hallström, A Modelling Framework for Composites containing 3D Reinforcement Composite Structures, pp.2895-2901, 2012.

F. Stig and S. Et-hallström, Spatial modelling of 3D-woven textiles Composite Structures, pp.1495-1502, 2012.

P. Tan, L. Tong, and G. P. Et-steven, Modelling for predicting the mechanical properties of textile composites -A review Composites Part A: Applied Science and Manufacturing, pp.903-922, 1997.

P. Tan, L. Tong, G. P. Steven, and T. Et-ishikawa, Behavior of 3D orthogonal woven CFRP composites. Part I. Experimental investigation Composites Part A: Applied Science and Manufacturing, pp.259-271, 2000.

H. Thom, Finite Element Modeling of Plain Weave Composites, Journal of Composite Materials, vol.7, issue.16, pp.1491-1511, 1999.
DOI : 10.1177/002199839903301602

N. Toyama, J. Noda, and T. Et-okabe, Lamb wave method for quick inspection of impact-induced delamination in composite laminates Composites Science and Technology, pp.1473-1479, 2003.

N. Toyama and T. Et-okabe, Effects of tensile strain and transverse cracks on Lamb-wave velocity in cross-ply FRP laminates, Journal of Materials Science, vol.39, issue.24, pp.7365-7367, 2004.
DOI : 10.1023/B:JMSC.0000048752.28719.3a

N. Toyama and J. Et-takatsubo, An investigation of non-linear elastic behavior of CFRP laminates and strain measurement using Lamb waves Composites Science and Technology, pp.2509-2516, 2004.

D. Trias, J. Costa, J. Mayugo, and J. Et-hurtada, Random models versus periodic models for fibre reinforced composites, Computational Materials Science, vol.38, issue.2, pp.316-324, 2006.
DOI : 10.1016/j.commatsci.2006.03.005

F. Trochu, E. Ruiz, V. Achim, and S. Et-soukane, Advanced numerical simulation of liquid composite molding for process analysis and optimisation Composites Part A: Applied Science and Manufacturing, pp.890-902, 2006.

T. Vandellos, Développement d'une stratégie de modélisation du délaminage dans les structures composites stratifiés Thèse de Doctorat, 2011.

J. Varna, R. Joffe, L. Berglung, and T. Et-lundström, Effect of voids on failure mechanisms in RTM laminates Composites Science and Technology, pp.241-249, 1995.

B. Verleye, Computation of the permeability of multi-scale porous media with application to technical textiles Thèse de Doctorat, 2008.

I. Verpoest and S. Et-lomov, Virtual textile composites software Wisetex: Integration with micro-mechanical, permeability and structural analysis Composites Science and Technology, pp.2563-2574, 2005.

Y. Wang and X. Et-sun, Digital-element simulation of textile processes Composites Science and Technology, pp.311-319, 2001.

R. Wentorf, R. Collar, M. S. Shephard, and J. Fish, Automated modeling for complex woven mesostructures, Computer Methods in Applied Mechanics and Engineering, vol.172, issue.1-4, pp.273-291, 1999.
DOI : 10.1016/S0045-7825(98)00232-1

J. D. Whitcomb, Livre Three-Dimensional Stress Analysis of Plain Weave Composites Eds, 1991.

K. Woo and J. D. Et-whitcomb, Effects of fiber tow misalignment on the engineering properties of plain weave textile composites Composite Structures, pp.343-355, 1997.

Z. Wu, Three-dimensional exact modeling of geometric and mechanical properties of woven composites, Acta Mechanica Solida Sinica, vol.22, issue.5
DOI : 10.1016/S0894-9166(09)60299-8

J. Xu, B. N. Cox, M. A. Mcglockton, and W. C. Carter, A binary model of textile composites -II. The elastic regime Acta Metallurgica et Materialia, pp.3511-3524, 1995.

M. Zako, Y. Uetsuji, and T. Et-kurashiki, Finite element analysis of damaged woven fabric composite materials Composites Science and Technology, pp.507-516, 2003.

Y. Zhang, T. J. Hughes, and C. L. Et-bajaj, An automatic 3D mesh generation method for domains with multiple materials, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.5-8, pp.405-415, 2010.
DOI : 10.1016/j.cma.2009.06.007

L. Zhao, N. Warrior, and A. Long, A thermo-viscoelastic analysis of process-induced residual stress in fibre-reinforced polymermatrix composites, Materials Science and Engineering A, pp.452-453483, 2007.

E. Zhou, D. Mollenhauer, and L. , EV A realistic 3-D textile geometric model Seventeenth international conference on composite materials ICCM-17, 2009.