B. , R. Barre, P. Et, B. , and S. , Influence of high-speed machine tool control parameters on the contouring accuracy. application to linear and circular interpolation, Journal of Intelligent & Robotic Systems, vol.40, pp.321-342, 2004.

B. Barsky, D. Et, and T. , Geometric continuity of parametric curves: three equivalent characterizations, IEEE Computer Graphics and Applications, vol.9, issue.6, pp.60-69, 1989.
DOI : 10.1109/38.41470

. Beaucamp, Finishing of optical moulds to ??/20 by automated corrective polishing, CIRP Annals - Manufacturing Technology, vol.60, issue.1, pp.375-378, 2011.
DOI : 10.1016/j.cirp.2011.03.110

. Beudaert, Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path, International Journal of Machine Tools and Manufacture, vol.57, issue.0, pp.5773-82, 2012.
DOI : 10.1016/j.ijmachtools.2012.02.005
URL : https://hal.archives-ouvertes.fr/hal-00679118

. Beudaert, 5-axis local corner rounding of linear tool path discontinuities, International Journal of Machine Tools and Manufacture, vol.73, issue.0, pp.739-755, 2013.
DOI : 10.1016/j.ijmachtools.2013.05.008
URL : https://hal.archives-ouvertes.fr/hal-00843635

. Beudaert, 5-Axis tool path smoothing based on drive constraints, International Journal of Machine Tools and Manufacture, vol.51, issue.12, pp.51958-965, 2011.
DOI : 10.1016/j.ijmachtools.2011.08.014
URL : https://hal.archives-ouvertes.fr/hal-00626187

. Bi, An analytical curvaturecontinuous bezier transition algorithm for high-speed machining of a linear tool path, International Journal of Machine Tools and Manufacture, issue.0, pp.5755-65, 2012.

. Bobrow, Time-Optimal Control of Robotic Manipulators Along Specified Paths, The International Journal of Robotics Research, vol.1, issue.3, pp.3-17, 1985.
DOI : 10.1177/027836498500400301

E. L. Bohez, Compensating for systematic errors in 5-axis NC machining, Computer-Aided Design, vol.34, issue.5, pp.391-403, 2002.
DOI : 10.1016/S0010-4485(01)00111-7

. Bouard, Pocketing toolpath computation using an optimization method, Computer-Aided Design, vol.43, issue.9, pp.1099-1109, 2011.
DOI : 10.1016/j.cad.2011.05.008
URL : https://hal.archives-ouvertes.fr/hal-00682780

. Boucher, Generalized Predictive Cascade Control (GPCC) for Machine Tools Drives, CIRP Annals - Manufacturing Technology, vol.39, issue.1, pp.357-360, 1990.
DOI : 10.1016/S0007-8506(07)61072-5

P. Boucher, D. Dumur, R. Et, and P. , Robustification of CNC Controllers for Machine Tools Motor Drives, CIRP Annals - Manufacturing Technology, vol.52, issue.1, pp.293-296, 2003.
DOI : 10.1016/S0007-8506(07)60587-3

. Brecher, Use of NC kernel data for surface roughness monitoring in milling operations, The International Journal of Advanced Manufacturing Technology, vol.22, issue.3, pp.9-12953, 2011.
DOI : 10.1007/s00170-010-2904-z

. Brecher, Controller-integrated predictive oscillation compensation for machine tools with parallel kinematics, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.142-150, 2006.
DOI : 10.1016/j.ijmachtools.2005.04.014

. Brecher, Characterization and optimization of the dynamic tool path of a highly dynamic micromilling machine, CIRP Journal of Manufacturing Science and Technology, vol.1, issue.2, pp.86-91, 2008.
DOI : 10.1016/j.cirpj.2008.09.013

. Bristow, A survey of iterative learning control, IEEE Control Systems Magazine, vol.26, issue.3, pp.2696-114, 2006.
DOI : 10.1109/MCS.2006.1636313

. Broquere, From motion planning to trajectory control with bounded jerk for service manipulator robots, 2010 IEEE International Conference on Robotics and Automation, pp.4505-4510, 2010.
DOI : 10.1109/ROBOT.2010.5509152

C. Castagnetti, Amélioration du comportement cinématique des machines par l'optimisation des trajets d'usinage 5 axes, Thèse de doctorat, 2008.

. Castagnetti, The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation, Computer-Aided Design, vol.40, issue.9, pp.40938-950, 2008.
DOI : 10.1016/j.cad.2008.07.002

. Cheng, . Tseng, C. Cheng, T. Et, and W. , Design and implementation of a real-time NURBS surface interpolator, The International Journal of Advanced Manufacturing Technology, vol.118, issue.1-2, pp.98-104, 2006.
DOI : 10.1007/s00170-005-0021-1

P. Corke, Matlab toolboxes : robotics and vision for students and teachers. Robotics Automation Magazine, IEEE, vol.14, issue.4, pp.16-17, 2007.

. Dietmair, . Verl, A. Dietmair, and A. Verl, DRIVE BASED VIBRATION REDUCTION FOR PRODUCTION MACHINES, MM Science Journal, vol.2009, issue.03, 2009.
DOI : 10.17973/MMSJ.2009_10_20090604

D. , J. Ferreira, P. Et, S. , and J. , Feed-rate optimization with jerk constraints for generating minimum-time trajectories, International Journal of Machine Tools and Manufacture, vol.47, pp.12-131941, 2007.

D. , J. Et, S. , and J. A. , A generalized time-optimal bidirectional scan algorithm for constrained feed-rate optimization, Journal of Dynamic Systems, Measurement, and Control, vol.128, pp.379-390, 2006.

D. , J. Et, S. , and J. A. , Optimal feed-rate scheduling for high-speed contouring, Journal of Manufacturing Science and Engineering, vol.129, pp.63-76, 2007.

E. Duc, Usinage de formes gauche : contribution à l'amélioration de la qualité des trajectoires d'usinage, Thèse de doctorat, 1998.

. Duc, A New Concept for the Design and the Manufacturing of Free-Form Surfaces: The Machining Surface, CIRP Annals - Manufacturing Technology, vol.48, issue.1, pp.103-106, 1999.
DOI : 10.1016/S0007-8506(07)63141-2

A. Dugas, CFAO et UGV -Simulation d'usinage de formes complexes, Thèse de doctorat, 2002.

. Dumur, . Boucher, D. Dumur, and P. Boucher, New Predictive Solutions to Very High Speed Machining, CIRP Annals - Manufacturing Technology, vol.43, issue.1, pp.363-366, 1994.
DOI : 10.1016/S0007-8506(07)62232-X

. Farouki, . Tsai, R. T. Farouki, T. Et, and Y. , Exact Taylor series coefficients for variable-feedrate CNC curve interpolators, Computer-Aided Design, vol.33, issue.2, pp.155-165, 2001.
DOI : 10.1016/S0010-4485(00)00085-3

S. Fleisig, R. V. Et, S. , and A. D. , A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining, Computer-Aided Design, vol.33, issue.1, pp.1-15, 2001.
DOI : 10.1016/S0010-4485(00)00049-X

. Gasparetto, . Zanotto, A. Gasparetto, Z. Et, and V. , A technique for time-jerk optimal planning of robot trajectories, Robotics and Computer-Integrated Manufacturing, vol.24, issue.3, pp.415-426, 2008.
DOI : 10.1016/j.rcim.2007.04.001

. Gasparetto, . Zanotto, A. Gasparetto, Z. Et, and V. , Optimal trajectory planning for industrial robots Advances in Engineering Software, pp.548-556, 2010.

. Ge, Interpolating Solid Orientations with a C 2-Continuous B-Spline Quaternion Curve, Lecture Notes in Computer Science, vol.4469, pp.606-615, 2007.
DOI : 10.1007/978-3-540-73011-8_58

. Groß, Electrical feed drives in automation, 2001.

A. Guiot, Modélisation et simulation du procédé de prépolissage automatique sur centre d'usinage 5 axes, Thèse de doctorat, 2012.

. Heng, . Erkorkmaz, M. Heng, E. Et, and K. , Design of a NURBS interpolator with minimal feed fluctuation and continuous feed modulation capability, International Journal of Machine Tools and Manufacture, vol.50, issue.3, pp.281-293, 2010.
DOI : 10.1016/j.ijmachtools.2009.11.005

M. Ho, Y. Hwang, H. Et, and C. , Five-axis tool orientation smoothing using quaternion interpolation algorithm, International Journal of Machine Tools and Manufacture, vol.43, issue.12, pp.431259-1267, 2003.
DOI : 10.1016/S0890-6955(03)00107-X

I. Gmbh, Isg-kernel, www.isg-stuttgart.de/kernel.html, consulté le 1 février 2013. [ISO14649-10 Industrial automation systems and integration -physical device control -data model for computerized numerical controllers -part 10 : General process data Industrial automation systems and integration -physical device control -data model for computerized numerical controllers -part 11 : Process data for milling, pp.14649-14659, 2004.

Y. Koren, Cross-Coupled Biaxial Computer Control for Manufacturing Systems, Journal of Dynamic Systems, Measurement, and Control, vol.102, issue.4, pp.265-272, 1980.
DOI : 10.1115/1.3149612

K. , Y. Et, L. , and R. , Five-axis surface interpolators, CIRP Annals -Manufacturing Technology, vol.44, issue.1, pp.379-382, 1995.

R. Laguionie, Intégration de la programmation basée entitées pour la fabrication sur machines à commandes numériques dans un contexte multi-process, Thèse de doctorat, 2010.

. Lai, On the development of a parametric interpolator with confined chord error, feedrate, acceleration and jerk, The International Journal of Advanced Manufacturing Technology, vol.36, issue.1, pp.104-121, 2008.
DOI : 10.1007/s00170-007-0954-7

. Lambrechts, Trajectory planning and feedforward design for electromechanical motion systems, Control Engineering Practice, vol.13, issue.2, pp.145-157, 2005.
DOI : 10.1016/j.conengprac.2004.02.010
URL : http://repository.tue.nl/614692

. Langeron, A new format for 5-axis tool path computation, using Bspline curves, Computer-Aided Design, vol.36, issue.12, pp.361219-1229, 2004.
DOI : 10.1016/j.cad.2003.12.002

. Lartigue, Machining of free-form surfaces and Development of a dynamics-based NURBS interpolator with real-time look-ahead algorithm, International Journal of Machine Tools and Manufacture, issue.15, pp.472246-2262, 1999.

R. Lin, Real-time surface interpolator for 3D parametric surface machining on 3-axis machine tools, International Journal of Machine Tools and Manufacture, issue.10, pp.401513-1526, 2000.

C. Lo, CNC machine tool surface interpolator for ball-end milling of free-form surfaces, International Journal of Machine Tools and Manufacture, vol.40, issue.3, pp.307-326, 2000.
DOI : 10.1016/S0890-6955(99)00071-1

. Mal-inc and . Mal-inc, Virtual cnc, 2013.

M. , S. D. Et, A. , and Y. , Virtual cutting and optimization of three-axis milling processes, International Journal of Machine Tools and Manufacture, issue.10, pp.481063-1071, 2008.

N. , Y. , S. Et, Y. , and M. , A study on a generalized parametric interpolator with real-time jerk-limited acceleration, Computer-Aided Design, vol.36, pp.27-36, 2004.

. Olabi, Feedrate planning for machining with industrial six-axis robots, Control Engineering Practice, vol.18, issue.5, pp.471-482, 2010.
DOI : 10.1016/j.conengprac.2010.01.004
URL : https://hal.archives-ouvertes.fr/hal-00992192

. Otsuki, Curve interpolation method, 2004.

. Pardo-castellote, . Cannon, G. Pardo-castellote, C. Et, and R. H. , Proximate time-optimal algorithm for on-line path parameterization and modification, Proceedings of IEEE International Conference on Robotics and Automation, pp.1539-1546, 1996.
DOI : 10.1109/ROBOT.1996.506923

S. Pateloup, Modélisations et aptitudes à l'emploi des machines-outils à structure parallèle : vers une optimisation dirigée du processus, Thèse de doctorat, 2011.

V. Pateloup, Amélioration du comportement cinématique des machines outils UGV -Application au calcul de trajets d'évidement de poches, Thèse de doctorat, 2005.

. Pateloup, Bspline approximation of circle arc and straight line for pocket machining, Computer-Aided Design, vol.42, issue.9, pp.817-827, 2010.
DOI : 10.1016/j.cad.2010.05.003
URL : https://hal.archives-ouvertes.fr/hal-00567766

P. Péchard, Génération de trajectoires d'usinage grande vitesse 5 axes par flanc d'outil : intégration d'un critère de fluidité, Thèse de doctorat, 2009.

. Pechard, Geometrical deviations versus smoothness in 5-axis high-speed flank milling, International Journal of Machine Tools and Manufacture, vol.49, issue.6, pp.49454-461, 2009.
DOI : 10.1016/j.ijmachtools.2009.01.005
URL : https://hal.archives-ouvertes.fr/hal-00572764

X. Pessoles, Aide au choix du posage en usinage 5 axes continus par la modélisation du comportement cinématique des machines -outils, Thèse de doctorat, 2010.

. Pritschow, Open Controller Architecture ??? Past, Present and Future, CIRP Annals - Manufacturing Technology, vol.50, issue.2, pp.463-470, 2001.
DOI : 10.1016/S0007-8506(07)62993-X

D. Prévost, Modélisation avancée du couple Machine Outil / Commande Numérique dans un contexte UGV pour l'optimisation du calcul de trajectoires multi axes, Thèse de doctorat, 2011.

. Quaschner, Jerk-limitation with adaptation of the path dynamics, p.245, 2003.

M. Rauch, Optimisation de la programmation des MOCN -Application aux machines à structure parallèle, Thèse de doctorat, 2007.

. Saikumar, . Shunmugam, S. Saikumar, and M. Shunmugam, Development of a feed rate adaption control system for high-speed rough and finish end-milling of hardened EN24 steel, The International Journal of Advanced Manufacturing Technology, vol.4, issue.3, pp.9-12869, 2012.
DOI : 10.1007/s00170-011-3561-6

. Sekler, Model-based calculation of the system behavior of machine structures on the control device for vibration avoidance, The International Journal of Advanced Manufacturing Technology, vol.6, issue.7, pp.9-121087, 2012.
DOI : 10.1007/s00170-011-3450-z

B. Sencer, A. Et, and Y. , Modeling and Control of Contouring Errors for Five-Axis Machine Tools???Part II: Precision Contour Controller Design, Journal of Manufacturing Science and Engineering, vol.131, issue.3, p.31007, 2009.
DOI : 10.1115/1.3123336

. Sencer, Feed optimization for five-axis CNC machine tools with drive constraints, International Journal of Machine Tools and Manufacture, vol.48, issue.7-8, pp.733-745, 2008.
DOI : 10.1016/j.ijmachtools.2008.01.002

. Sencer, Modeling and Control of Contouring Errors for Five-Axis Machine Tools???Part I: Modeling, Journal of Manufacturing Science and Engineering, vol.131, issue.3, p.31006, 2009.
DOI : 10.1115/1.3123335

. Shin, . Mckay, K. Shin, M. Et, and N. , Minimum time trajectory planning for industrial robots with general torque constraints. The university of Michigan, 1985.

K. Shoemake, Animating rotation with quaternion curves, ACM SIGGRAPH Computer Graphics, vol.19, issue.3, pp.245-254, 1985.
DOI : 10.1145/325165.325242

. Siemens, SINUMERIK 840D sl, 2006.

. Siemens, SINUMERIK 840D sl, pp.6-5397, 2006.

M. Susanu, Commande prédictive hiérarchisée pour le positionnement des axes de machine-outil à architecture ouverte, Thèse de doctorat, 2005.
DOI : 10.1051/meca:2005053

Y. , H. Lin, M. Et, T. , and M. , Real-time NURBS interpolation using FPGA for high speed motion control, Computer-Aided Design, issue.10, pp.381123-1133, 2006.

Y. , C. , S. J. Et, C. , and W. , Apparatus and method for smooth cornering in a motion control system, United States, 2005.

Z. , K. Yuan, C. Et, G. , and X. , Efficient algorithm for time-optimal feedrate planning and smoothing with confined chord error and acceleration, The International Journal of Advanced Manufacturing Technology, pp.1-13, 2012.

. Zhao, A real-time look-ahead interpolation methodology with curvature-continuous B-spline transition scheme for CNC machining of short line segments, International Journal of Machine Tools and Manufacture, vol.65, issue.0, pp.6588-98, 2013.
DOI : 10.1016/j.ijmachtools.2012.10.005