N. Abedrabbo, F. Pourboghrat, and J. Carsley, Forming of aluminum alloys at elevated temperatures ??? Part 1: Material characterization, International Journal of Plasticity, vol.22, issue.2, pp.314-341, 2006.
DOI : 10.1016/j.ijplas.2005.03.005

N. Abedrabbo, F. Pourboghrat, and J. Carsley, Forming of aluminum alloys at elevated temperatures ??? Part 2: Numerical modeling and experimental verification, International Journal of Plasticity, vol.22, issue.2, pp.342-373, 2006.
DOI : 10.1016/j.ijplas.2005.03.006

N. Abedrabbo, F. Pourboghrat, and J. Carsley, Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models, International Journal of Plasticity, vol.23, issue.5, pp.841-875, 2007.
DOI : 10.1016/j.ijplas.2006.10.005

M. Aghaie-khafri and R. Mahmudi, Predicting of plastic instability and forming limit diagrams, International Journal of Mechanical Sciences, vol.46, issue.9, pp.1289-1306, 2004.
DOI : 10.1016/j.ijmecsci.2004.08.009

A. Ahmadi, A. Eivani, and . Akbarzadeh, An experimental and theoretical study on the prediction of forming limit diagrams using new BBC yield criteria and M???K analysis, Computational Materials Science, vol.44, issue.4, pp.1272-1280, 2009.
DOI : 10.1016/j.commatsci.2008.08.013

. Prasad, Numerical simulation for determination of limit strains of a cold rolled and solution treated nimonic C-263 alloy sheet, The Bulletin of Materials Science, vol.34, pp.515-524, 2011.

H. Aretz, Numerical restrictions of the modified maximum force criterion for prediction of forming limits in sheet metal forming, Modelling and Simulation in Materials Science and Engineering, vol.12, issue.4, pp.677-692, 2004.
DOI : 10.1088/0965-0393/12/4/009

H. Aretz, An extension of Hill???s localized necking model, International Journal of Engineering Science, vol.48, issue.3, pp.312-331, 2010.
DOI : 10.1016/j.ijengsci.2009.09.007

D. Bae and A. Ghosh, A planar simple shear test and flow behavior in a superplastic Al-Mg alloy, Metallurgical and Materials Transactions A, vol.14, issue.24, pp.2465-2471, 2003.
DOI : 10.1007/s11661-003-0006-3

D. Banabic, Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation, 154 Conclusions and perspectives, 2010.
DOI : 10.1007/978-3-540-88113-1

D. Banabic, H. Aretz, D. S. Comsa, and L. Paraianu, An improved analytical description of orthotropy in metallic sheets, International Journal of Plasticity, vol.21, issue.3, pp.493-512, 2005.
DOI : 10.1016/j.ijplas.2004.04.003

D. Banabic, H. Aretz, L. Paraianu, and P. Jurco, Application of various FLD modelling approaches, Modelling and Simulation in Materials Science and Engineering, vol.13, issue.5, pp.759-769, 2005.
DOI : 10.1088/0965-0393/13/5/009

D. Banabic, S. Comsa, P. Jurco, G. Cosovici, L. Paraianu et al., FLD theoretical model using a new anisotropic yield criterion, Journal of Materials Processing Technology, vol.157, issue.158, pp.157-15823, 2004.
DOI : 10.1016/j.jmatprotec.2004.09.015

D. Banabic and E. Dannenmann, Prediction of the influence of yield locus on the limit strains in sheet metals, Journal of Materials Processing Technology, vol.109, issue.1-2, pp.9-12, 2001.
DOI : 10.1016/S0924-0136(00)00770-6

D. Banabic and K. Siegert, Anisotropy and formability of AA5182-0 aluminium alloy sheets, CIRP Annals - Manufacturing Technology, vol.53, issue.1, pp.219-222, 2004.
DOI : 10.1016/S0007-8506(07)60683-0

F. Barlat and O. Richmond, Modelling macroscopic imperfections for the prediction of flow localization and fracture. Fatigue and fracture of engineering materials and structures, pp.311-321, 2003.

M. B. Tahar, Contribution à l'étude et la simulation du procédé d'hydroformage, 2005.

Y. Bergström, A dislocation model for the stress-strain behaviour of polycrystalline ??-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations, Materials Science and Engineering, vol.5, issue.4, pp.193-200, 1969.
DOI : 10.1016/0025-5416(70)90081-9

Y. Bergström, The plastic deformation of metals -a dislocation model and its applicability, Reviews on Powder Metallurgy and Physical Ceramics, vol.2, pp.105-115, 1983.

E. Billur and M. Koç, A Comparative Study on Hydraulic Bulge Testing and Analysis Methods, ASME 2008 International Manufacturing Science and Engineering Conference, Volume 1, 2008.
DOI : 10.1115/MSEC_ICMP2008-72238

H. Bo, L. Zhong-qin, L. Shu-hui, and Y. Zhong-qi, Prediction of forming limit in virtual sheet metal forming based on thickness gradient criterion, 2008.

S. Bodner and P. Y. , Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials, Journal of Applied Mechanics, vol.42, issue.2, pp.385-389, 1975.
DOI : 10.1115/1.3423586

N. Bonora and P. Milella, Constitutive modeling for ductile metals behavior incorporating strain rate, temperature and damage mechanics, International Journal of Impact Engineering, vol.26, issue.1-10, pp.53-64, 2001.
DOI : 10.1016/S0734-743X(01)00063-X

M. C. Butuc, J. J. Gracio, and A. B. Da-rocha, A theoretical study on forming limit diagrams prediction, Journal of Materials Processing Technology, vol.142, issue.3, pp.714-724, 2003.
DOI : 10.1016/S0924-0136(03)00813-6

S. Chen, C. Huang, C. Wang, and Z. Duan, Mechanical properties and constitutive relationships of 30CrMnSiA steel heated at high rate, Materials Science and Engineering: A, vol.483, issue.484, pp.105-108, 2008.
DOI : 10.1016/j.msea.2006.09.132

A. B. Da-rocha, F. Barlat, and J. Jalinier, Prediction of the forming limit diagrams of anisotropic sheets in linear and non-linear loading, Materials Science and Engineering, vol.68, issue.2, pp.151-164, 1984.
DOI : 10.1016/0025-5416(85)90404-5

S. Diot, Caractérisation expérimentale et numérique du comportement dynamique des matériaux, Institut National des Sciences Appliquées de Rennes, 2003.

S. Diot, D. Guines, A. Gavrus, and E. Ragneau, Minimization of Friction Influence on the Evaluation of Rheological Parameters From Compression Test: Application to a Forging Steel Behavior Identification, Journal of Engineering Materials and Technology, vol.131, issue.1, 2009.
DOI : 10.1115/1.3026543

M. Ganjiani and A. Assempour, An improved analytical approach for determination of forming limit diagrams considering the effects of yield functions, Journal of Materials Processing Technology, vol.182, issue.1-3, pp.598-607, 2007.
DOI : 10.1016/j.jmatprotec.2006.09.025

A. Gavrus, B. Davoodi, and E. Ragneau, A study of material constitutive behaviour at elevated temperature from compressive SPHB test using an inverse analysis method

A. Graf and W. Hosford, The influence of strain-path changes on forming limit diagrams of A1 6111 T4, International Journal of Mechanical Sciences, vol.36, issue.10, pp.897-910, 1994.
DOI : 10.1016/0020-7403(94)90053-1

D. E. Green, K. W. Neale, S. R. Macewen, A. Makinde, and R. Perrin, Experimental investigation of the biaxial behaviour of an aluminum sheet, International Journal of Plasticity, vol.20, issue.8-9, pp.8-91677, 2004.
DOI : 10.1016/j.ijplas.2003.11.012

Z. Gronostajski, The constitutive equations for FEM analysis, Journal of Materials Processing Technology, vol.106, issue.1-3, pp.40-44, 2000.
DOI : 10.1016/S0924-0136(00)00635-X

W. Guo and S. Nemat-nasser, Flow stress of Nitronic-50 stainless steel over a wide range of strain rates and temperatures, Mechanics of Materials, vol.38, issue.11, pp.1090-1103, 2006.
DOI : 10.1016/j.mechmat.2006.01.004

G. Gutscher, H. Wu, G. Ngaile, and T. Altan, Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test, Journal of Materials Processing Technology, vol.146, issue.1, pp.1-7, 2004.
DOI : 10.1016/S0924-0136(03)00838-0

R. Hill, On discontinuous plastic states, with special reference to localized necking in thin sheets, Journal of the Mechanics and Physics of Solids, vol.1, issue.1, pp.19-30, 1952.
DOI : 10.1016/0022-5096(52)90003-3

K. Ho, J. Lin, and T. Dean, Constitutive modelling of primary creep for age forming an aluminium alloy, Journal of Materials Processing Technology, vol.153, issue.154, pp.153-154122, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.304

P. Hora, L. Tong, and J. Reissner, Mathematical prediction of FLC using macroscopic instability criteria combined with microstructural crack propagation models, Proceeding of palsticity 03, pp.364-366, 2003.

S. Huang and A. Khan, Modeling the mechanical behaviour of 1100-0 aluminum at different strain rates by the bodner-partom model, International Journal of Plasticity, vol.8, issue.5, pp.501-517, 1992.
DOI : 10.1016/0749-6419(92)90028-B

J. Hutchinson, K. Neale, and A. Needleman, Mechanics of sheet metal forming, pp.269-285, 1978.

H. Vegter, C. Ten-horn, and M. Abspoel, Modeling of the froming limit curve by MK analysis and FE simulations, NUMISHEET, 2008.

P. Jeunechamps, K. Ho, J. Lin, J. Ponthot, and T. Dean, A closed form technique to predict springback in creep age-forming, International Journal of Mechanical Sciences, vol.48, issue.6, pp.621-629, 2006.
DOI : 10.1016/j.ijmecsci.2006.01.005

M. Jie, C. Cheng, L. Chan, C. Chow, and C. Tang, Experimental and Theoretical Analysis on Formability of Aluminum Tailor-Welded Blanks, Journal of Engineering Materials and Technology, vol.129, issue.1, p.151, 2007.
DOI : 10.1115/1.2400274

G. Johnson and W. Cook, A constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures, Procedings of the 7th International Symposium on Ballistics, 1983.

W. Johnston, W. Pollock, and D. Dawicke, Biaxial testing of 2195 aluminium alloy using cruciform specimen, Analytical Services and Materials, 2002.

R. Kapoor and S. Nemat-nasser, Comparison between high strain-rate and low strainrate deformation of tantalum, Metallurgical and Materials Transactions A, pp.31-815, 1999.

A. Karafillis and M. Boyce, A general anisotropic yield criterion using bounds and a transformation weighting tensor, Journal of the Mechanics and Physics of Solids, vol.41, issue.12, pp.1859-1886, 1993.
DOI : 10.1016/0022-5096(93)90073-O

A. S. Khan and M. Baig, Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy, International Journal of Plasticity, vol.27, issue.4, pp.522-538, 2011.
DOI : 10.1016/j.ijplas.2010.08.001

A. S. Khan and S. Huang, Experimental and theoretical study of mechanical behavior of 1100 aluminum in the strain rate range 10???5???104s???1, International Journal of Plasticity, vol.8, issue.4, pp.397-424, 1992.
DOI : 10.1016/0749-6419(92)90057-J

A. S. Khan and R. Liang, Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling, International Journal of Plasticity, vol.15, issue.10, pp.1089-1109, 1999.
DOI : 10.1016/S0749-6419(99)00030-3

S. Kim, H. Huh, H. Bok, and M. Moon, Forming limit diagram of auto-body steel sheets for high-speed sheet metal forming, Journal of Materials Processing Technology, vol.211, issue.5, pp.851-862, 2011.
DOI : 10.1016/j.jmatprotec.2010.01.006

J. Klepaczko, Thermally activated flow and strain rate history effects for some polycrystalline f.c.c. metals, Materials Science and Engineering, vol.18, issue.1, pp.121-135, 1975.
DOI : 10.1016/0025-5416(75)90078-6

J. Klepaczko, A practical stress-strain-strain rate-temperature constitutive relation of the power form, Journal of Mechanical Working Technology, vol.15, issue.2, pp.25-39, 1987.
DOI : 10.1016/0378-3804(87)90031-3

U. Kocks, A. Argon, and M. Ashby, Thermodynamics and kinematics of slip, Progress in Materials Science, vol.19, 1975.

A. Korhonen and T. Manninen, Forming and fracture limits of austenitic stainless steel sheets, Materials Science and Engineering: A, vol.488, issue.1-2, pp.157-166, 2008.
DOI : 10.1016/j.msea.2007.11.006

D. Li and A. Ghosh, Tensile deformation behavior of aluminum alloys at warm forming temperatures, Materials Science and Engineering: A, vol.352, issue.1-2, pp.279-286, 2003.
DOI : 10.1016/S0921-5093(02)00915-2

D. Li and A. K. Ghosh, Biaxial warm forming behavior of aluminum sheet alloys, Journal of Materials Processing Technology, vol.145, issue.3, pp.281-293, 2004.
DOI : 10.1016/j.jmatprotec.2003.07.003

M. Li and A. Chandra, Influence of strain-rate sensitivity on necking and instability in sheet metal forming, Journal of Materials Processing Technology, vol.96, issue.1-3, pp.133-138, 1999.
DOI : 10.1016/S0924-0136(99)00321-0

R. Liang and A. S. Khan, A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures, International Journal of Plasticity, vol.15, issue.9, pp.963-980, 1999.
DOI : 10.1016/S0749-6419(99)00021-2

Y. Lin, M. Chen, and J. Zhong, Prediction of 42CrMo steel flow stress at high temperature and strain rate, Mechanics Research Communications, vol.35, issue.3, pp.142-150, 2008.
DOI : 10.1016/j.mechrescom.2007.10.002

Y. Lin and X. Chen, A combined Johnson???Cook and Zerilli???Armstrong model for hot compressed typical high-strength alloy steel, Computational Materials Science, vol.49, issue.3, pp.628-633, 2010.
DOI : 10.1016/j.commatsci.2010.06.004

Y. Lin, Y. Xia, X. Chen, and M. Chen, Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate, Computational Materials Science, vol.50, issue.1, pp.227-233, 2010.
DOI : 10.1016/j.commatsci.2010.08.003

Z. Liu, Numerical and experimental study of AZ31-O magnesium alloy warm sheet forming, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00718370

C. Macgregor and J. Fisher, A velocity modified temperature for the plastic flow of metals, Journal of Applied Mechanics, vol.13, pp.11-16, 1946.

S. Mahabunphachai and M. Koç, Investigations on forming of aluminum 5052 and 6061 sheet alloys at warm temperatures, Materials & Design (1980-2015), vol.31, issue.5, pp.2422-2434, 2010.
DOI : 10.1016/j.matdes.2009.11.053

W. Mailer and K. Pohiandt, New experiments for determining yield loci of sheet metal, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.643-648, 1996.
DOI : 10.1016/0924-0136(96)02399-0

Z. Marciniak and K. Kuczynski, Limit strains in the processes of stretch-forming sheet metal, International Journal of Mechanical Sciences, vol.9, issue.9, pp.609-620, 1967.
DOI : 10.1016/0020-7403(67)90066-5

A. , M. Lopez, and A. Boogaard-van-den, Formability limit curves under stretchbending, 15th International Deep Drawing Research Group Conference, 2011.

M. Merklein, A. Kuppert, and M. Geiger, Time dependent determination of forming limit diagrams, CIRP Annals - Manufacturing Technology, vol.59, issue.1, pp.295-298, 2010.
DOI : 10.1016/j.cirp.2010.03.001

R. Mesrar, S. Fromentin, R. Makkouk, M. Martiny, and G. Ferron, Limits to the ductility of metal sheets subjected to complex strain-paths, International Journal of Plasticity, vol.14, issue.4-5, pp.391-411, 1998.
DOI : 10.1016/S0749-6419(98)00011-4

T. Naka, G. Torikai, R. Hino, and F. Yoshida, The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum???magnesium alloy sheet, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.1-3648, 2001.
DOI : 10.1016/S0924-0136(01)00650-1

T. Naka, T. Uemori, R. Hino, M. Kohzu, K. Higashi et al., Effects of strain rate, temperature and sheet thickness on yield locus of AZ31 magnesium alloy sheet, Journal of Materials Processing Technology, vol.201, issue.1-3, pp.1-3395, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.189

K. Narasimhan and R. Wagoner, Finite element modeling simulation of in-plane forming limit diagrams of sheets containing finite defects, Metallurgical Transactions A, vol.97, issue.11, pp.2655-2665, 1990.
DOI : 10.1007/BF02851359

C. J. Neil and S. R. Agnew, Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B, International Journal of Plasticity, vol.25, issue.3, pp.379-398, 2009.
DOI : 10.1016/j.ijplas.2008.05.003

S. Nemat-nasser and J. Isaacs, Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and TaW alloys, Acta Materialia, vol.45, issue.3
DOI : 10.1016/S1359-6454(96)00243-1

Q. Nie and D. Lee, The effect of rate sensitivity on history dependent forming limits of anisotropic sheet metals, Journal of Materials Shaping Technology, vol.30, issue.4, pp.233-240, 1991.
DOI : 10.1007/BF02833648

V. Nohajová, K. Masláková, M. ?tamborská, and Z. Bobovský, Brief description and application of bonder-partom model, Modelling of mechanical and mechatronic systems, 2011.

G. Palumbo, D. Sorgente, and L. Tricarico, A numerical and experimental investigation of AZ31 formability at elevated temperatures using a constant strain rate test, Materials & Design, vol.31, issue.3, pp.1308-1316, 2010.
DOI : 10.1016/j.matdes.2009.09.009

G. Palumbo and L. Tricarico, Numerical and experimental investigations on the Warm Deep Drawing process of circular aluminum alloy specimens, Journal of Materials Processing Technology, vol.184, issue.1-3, pp.115-123, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.024

T. Pepelnjak and K. Kuzman, Numerical determination of the forming limit diagrams, Journal of Achievements in Materials and Manufacturing Engineering, vol.20, pp.375-378, 2007.

A. Petek, T. Pepelnjak, and K. Kuzman, An improved method for determining forming limit diagram in the digital enviroments, Journal of Mechanicial Engineering, vol.51, pp.330-345, 2005.

R. Picu, G. Vincze, F. Ozturk, J. Gracio, F. Barlat et al., Strain rate sensitivity of the commercial aluminum alloy AA5182-O, Materials Science and Engineering: A, vol.390, issue.1-2, pp.334-343, 2005.
DOI : 10.1016/j.msea.2004.08.029

S. M. Rehlaender, Plane strain compression testing of aluminium alloy 6061 at elevated temperatures The university of british columbia, 1994.

A. Rusinek and J. R. Klepaczko, Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress, International Journal of Plasticity, vol.17, issue.1, pp.87-115, 2001.
DOI : 10.1016/S0749-6419(00)00020-6

A. Rusinek and J. Rodríguez-martínez, Thermo-viscoplastic constitutive relation for aluminium alloys, modeling of negative strain rate sensitivity and viscous drag effects, Materials & Design, vol.30, issue.10, pp.4377-4390, 2009.
DOI : 10.1016/j.matdes.2009.04.011

A. Rusinek, J. Rodríguez-martínez, and A. Arias, A thermo-viscoplastic constitutive model for FCC metals with application to OFHC copper, International Journal of Mechanical Sciences, vol.52, issue.2, pp.120-135, 2010.
DOI : 10.1016/j.ijmecsci.2009.07.001

A. Rusinek, R. Zaera, and J. Klepaczko, Constitutive relations in 3-D for a wide range of strain rates and temperatures ??? Application to mild steels, International Journal of Solids and Structures, vol.44, issue.17, pp.5611-5634, 2007.
DOI : 10.1016/j.ijsolstr.2007.01.015

A. Rusinek, R. Zaera, J. Klepaczko, and R. Cheriguene, Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel, Acta Materialia, issue.20, pp.535387-5400, 2005.
DOI : 10.1016/j.actamat.2005.08.019

D. Samantaray, S. Mandal, U. Borah, A. Bhaduri, and P. Sivaprasad, A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel, Materials Science and Engineering: A, vol.526, issue.1-2, pp.1-6, 2009.
DOI : 10.1016/j.msea.2009.08.009

M. Seth, High velocity formability and factors affecting it, 2006.

H. Shin and J. Kim, A phenomenological constitutive equation to describe various flow stress behaviors of materials in wide strain rate and temperature regimes Conclusions and perspectives, Journal of Engineering Materials and Technology, vol.132, 2010.

J. Signorelli, M. Bertinetti, and P. Turner, Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model, International Journal of Plasticity, vol.25, issue.1, pp.1-25, 2009.
DOI : 10.1016/j.ijplas.2008.01.005

W. Sing and K. Rao, Role of strain-hardening laws in the prediction of forming limit curves, Journal of Materials Processing Technology, vol.63, issue.1-3, pp.105-110, 1997.
DOI : 10.1016/S0924-0136(96)02608-8

J. H. Sung, J. H. Kim, and R. Wagoner, A plastic constitutive equation incorporating strain, strain-rate, and temperature, International Journal of Plasticity, vol.26, issue.12, pp.1746-1771, 2010.
DOI : 10.1016/j.ijplas.2010.02.005

S. Toros, F. Ozturk, and I. Kacar, Review of warm forming of aluminum???magnesium alloys, Journal of Materials Processing Technology, vol.207, issue.1-3, pp.1-12, 2008.
DOI : 10.1016/j.jmatprotec.2008.03.057

A. Van-den-boogaard and P. Bolt, A material model for warm forming of aluminium sheet, VII International conference on computational plasticity, COMPLAS, 2003.

H. Vegter, C. H. Ten-horn, Y. An, E. H. Atzema, H. H. Pijlman et al., Characterization and modelling of the plastic material behaviour and its application in sheet metal forming simulation, VII International Conference on Computational Plasticity, 2003.

H. Vegter, A. Van-den, and . Boogaard, A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states, International Journal of Plasticity, vol.22, issue.3, pp.557-580, 2006.
DOI : 10.1016/j.ijplas.2005.04.009

G. Z. Voyiadjis and F. H. Abed, Microstructural based models for bcc and fcc metals with temperature and strain rate dependency, Mechanics of Materials, vol.37, issue.2-3, pp.355-378, 2005.
DOI : 10.1016/j.mechmat.2004.02.003

H. Wang, M. Wan, Y. Yan, and X. Wu, The Biaxial Stress-Strain Curves of Sheet Metals, Applied Mechanics and Materials, pp.44-472519, 2011.
DOI : 10.4028/www.scientific.net/AMM.44-47.2519

L. Wang, M. Strangwood, D. Balint, J. Lin, and T. Dean, Formability and failure mechanisms of AA2024 under hot forming conditions, Materials Science and Engineering: A, vol.528, issue.6, pp.2648-2656, 2011.
DOI : 10.1016/j.msea.2010.11.084

A. A. Zadpoor, J. Sinke, and R. Benedictus, Optimization of computation procedures for full-model strain path dependent analysis of forming limits, International Deep Drawing Research Group, 2008.

F. Zerlli and R. Armstrong, Dislocation???mechanics???based constitutive relations for material dynamics calculations, Journal of Applied Physics, vol.61, issue.5, pp.1816-1825, 1987.
DOI : 10.1063/1.338024

C. Zhang, Etude de l'effect de la sensibilité à la vitesse de déformation sur la formabilité de tôle en alliage d'aluminium, 2008.

C. Zhang, L. Leotoing, G. Zhao, D. Guines, and E. Ragneau, A methodology for evaluating sheet formability combining the tensile test with the M???K model, Materials Science and Engineering: A, vol.528, issue.1, pp.480-485, 2010.
DOI : 10.1016/j.msea.2010.09.001

URL : https://hal.archives-ouvertes.fr/hal-00981684

C. Zhang, L. Leotoing, G. Zhao, D. Guines, and E. Ragneau, A Comparative Study of Different Necking Criteria for Numerical and Experimental Prediction of FLCs, Journal of Materials Engineering and Performance, vol.112, issue.158, pp.1036-1042
DOI : 10.1007/s11665-010-9729-7

URL : https://hal.archives-ouvertes.fr/hal-00806305

S. Zhang, M. Harada, K. Ozaki, and M. Sakane, Multiaxial creep???fatigue life using cruciform specimen, International Journal of Fatigue, vol.29, issue.5, pp.852-859, 2007.
DOI : 10.1016/j.ijfatigue.2006.09.007

I. Zidane, Développement d'un banc d'essai de traction biaxiale pour la caractérisation de la formabilité et du comportement élastoplastique de tôles métalliques, 2009.