X-ray tomography in material science, 2000. ,
Quantitative phase contrast tomography using coherent synchrotron radiation, Developments in X-Ray Tomography III, pp.4503-82, 2002. ,
DOI : 10.1117/12.452867
Observation of microstructure and damage in materials by phase sensitive radiography and tomography, Journal of Applied Physics, vol.81, issue.9, pp.81-5878, 1997. ,
DOI : 10.1063/1.364374
Application of X-ray microtomography in, Materials Science, AEM, vol.3, pp.8-539, 2001. ,
URL : https://hal.archives-ouvertes.fr/hal-00475297
Tomographie à rayons X appliquée à l'étude des matériaux, Techniques de l'ingénieur, pp.20-21, 2004. ,
Advances in synchrotron radiation microtomography, Scripta Materialia, vol.55, issue.1, pp.41-46, 2006. ,
DOI : 10.1016/j.scriptamat.2006.02.012
URL : https://hal.archives-ouvertes.fr/hal-00436214
La tomographie X : Principe, méthodes, possibilités ,
Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays, Applied Physics Letters, vol.75, issue.19 ,
DOI : 10.1063/1.125225
A comparison of synchrotron X-ray phase contrast tomography and holotomography for non-invasive investigations of the internal anatomy of mites,Soil Organisms, pp.205-215, 2008. ,
In situ ultra-fast continuous X-rays micro-tomography : application to crack propagation and to solidification ,
In situ continuous X-rays micro-tomography : application to high temperature deformation of magnesium alloys and to solidification of aluminium alloys, Nantes), p.8, 2010. ,
Grain boundary penetration in the AI/Ga system : a synchrotron radiation Xray imaging investigation, p.197, 2004. ,
A 1300 K furnace for in situ X-ray microtomography, J. Appl. Cryst, vol.4336, pp.366-367, 2003. ,
Characterisation of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography, Acta Met, vol.5, pp.47-1613, 1999. ,
In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography, Journal of Materials Science, vol.37, issue.8, pp.1547-1555, 2002. ,
DOI : 10.1023/A:1014920902712
Micro-compression: a novel technique for the nondestructive assessment of local bone failure, Technolgy and Health Care, pp.433-444, 1998. ,
Experimental study of porosity and its relation to fatigue mechanisms of model Al???Si7???Mg0.3 cast Al alloys, Materials Science and Engineering: A, vol.316, issue.1-2, pp.316115-126, 2001. ,
DOI : 10.1016/S0921-5093(01)01225-4
X-ray micro tomography for studying localized deformation in fine-grained geomaterials under triaxial compression, C. R. Mecanique, pp.332819-826, 2004. ,
URL : https://hal.archives-ouvertes.fr/hal-00541473
Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading, Scripta Materialia, vol.63, issue.3, pp.277-280, 2010. ,
DOI : 10.1016/j.scriptamat.2010.04.010
URL : https://hal.archives-ouvertes.fr/hal-00517217
Three-dimensional image reconstruction in radiology and nuclear medicine, p.315, 1996. ,
Imagerie médicale : méthodes de reconstruction et techniques instrumentales, 1985. ,
In-line phase contrast in synchrotron-radiation microradiography and tomography, Developments in X-Ray Tomography III, pp.4503-92, 2002. ,
DOI : 10.1117/12.452832
Introduction to local tomography, Contemporary Mathematics, pp.29-47, 2001. ,
DOI : 10.1090/conm/278/04592
Image reconstruction from projections, II Modified back-projection methods, Optik Stuttgart, pp.5085-109, 1978. ,
Region of interest micro-CT of the middle ear: a practical approach J. X-Ray Sci, Technol, pp.13137-147, 2005. ,
Tomographie 2D locale en géométrie divergente par une approche ondelettes non séparables ,
Multiresolution tomographic reconstruction using wavelets, IEEE Transactions on Image Processing, vol.4, issue.6, pp.799-813, 1995. ,
DOI : 10.1109/83.388081
Wavelet-based multiresolution local tomography, IEEE Transactions on Image Processing, issue.6, pp.1412-1430, 1997. ,
Limited Field of View Reconstruction in Computerized Tomography, IEEE Transactions on Nuclear Science, vol.26, issue.1, pp.26546-551, 1979. ,
DOI : 10.1109/TNS.1979.4329688
Region-of-interest microtomography for component inspection, IEEE Transactions on Nuclear Science, vol.46, issue.1, pp.4631-4677, 1999. ,
DOI : 10.1109/23.747765
Region-of-interest cone-beam computed tomography, pp.381-385 ,
Practical error estimation in zoom-in and truncated tomography reconstructions, Review of Scientific Instruments, vol.78, issue.6, pp.78-063705, 2007. ,
DOI : 10.1063/1.2744224
Region-of-interest tomography using filtered backprojection: assessing the practical limits, Journal of Microscopy, vol.2007, issue.1, pp.241-69, 2011. ,
DOI : 10.1111/j.1365-2818.2010.03408.x
High-Resolution X-Ray Computed Tomography Using a Solid-State Linear Detector, Journal of X-Ray Science and Technology, vol.6, issue.1, pp.94-106, 1996. ,
DOI : 10.1006/jxra.1996.0007
Optimal time-frequency projections for localized tomography, Annals of Biomedical Engineering, vol.August, issue.3, 1996. ,
DOI : 10.1007/BF02584461
Wavelet localization of the Radon transform, IEEE Transactions on Signal Processing, vol.42, issue.8, pp.2055-2067, 1994. ,
DOI : 10.1109/78.301841
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.53719-730, 2005. ,
DOI : 10.1016/j.actamat.2004.10.024
URL : https://hal.archives-ouvertes.fr/hal-00436799
Flow of Gases through Porous Media, pp.11-13, 1956. ,
Novel metallic hollow sphere structures: processing and properties, Proceedings of Int. Confon Metal Foams and Porous Metal structures, pp.14-16, 1999. ,
Metal foam : a design guide, 2000. ,
DOI : 10.1016/s0261-3069(01)00049-8
Effect of pore size on the tensile behavior of open-cell Ti foams: Experimental results, Materials Letters, vol.64, issue.8, pp.935-937, 2001. ,
DOI : 10.1016/j.matlet.2010.01.064
Tensile properties of open-cell nickel foams, Materials & Design, vol.31, issue.4, pp.31-35, 2001. ,
DOI : 10.1016/j.matdes.2009.10.018
The influence of crack-like defects on the tensile strength of an open-cell aluminum foam, Scripta Materialia, vol.44, issue.7, pp.1005-1010, 2001. ,
DOI : 10.1016/S1359-6462(01)00673-X
Compressive and tensile behaviour of aluminum foams, Materials Science and Engineering: A, vol.270, issue.2, pp.113-124, 1999. ,
DOI : 10.1016/S0921-5093(99)00170-7
Handbook of cellular metals: production, processing, applications, p.373, 2002. ,
DOI : 10.1002/3527600558
3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography, Philosophical Magazine, vol.11, issue.19, pp.85-104, 2005. ,
DOI : 10.1103/PhysRevE.53.6181
URL : https://hal.archives-ouvertes.fr/hal-00154842
F Cellular Solids : structure and properties, 1997. ,
DOI : 10.1017/CBO9781139878326
Uniaxial Deformation of Microcellular Metals: Model Systems and Simplified Analysis, IUTAM Symposium on Mechanical Properties of Cellular Materials, pp.12-13, 2009. ,
DOI : 10.1007/978-1-4020-9404-0_1
Quasistatic mechanical behaviour of stainless steel hollow sphere foam: Macroscopic properties and damage mechanisms followed by X-ray tomography, Materials Letters, vol.63, issue.13-14, pp.13-141113, 2009. ,
DOI : 10.1016/j.matlet.2008.10.051
URL : https://hal.archives-ouvertes.fr/hal-00436510
Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading, Scripta Materialia, vol.63, issue.3, pp.277-280, 2010. ,
DOI : 10.1016/j.scriptamat.2010.04.010
URL : https://hal.archives-ouvertes.fr/hal-00517217
Uniaxial deformation of open-cell aluminum foam: the role of internal damage, Acta Materialia, vol.52, issue.10, pp.102895-2902, 2004. ,
DOI : 10.1016/j.actamat.2004.02.035
Structure et proprieties de mousses d'aluminium élaborées par replication de préformes de sel, 2006. ,
Multifunctional Metallic Hollow Sphere Structures Manufacturing, Properties and Application, 2009. ,
In situ observations of compressive behaviour of aluminium foams by local tomography using high-resolution X-rays, Philosophical Magazine, vol.86, pp.28-4417, 2006. ,
Deformation and fracture of aluminium foams, Materials Science and Engineering: A, vol.291, issue.1-2, pp.1-2136, 2000. ,
DOI : 10.1016/S0921-5093(00)00954-0
Influence of cell aspect ratio on architecture and compressive strength of titanium foams, Materials Science and Engineering: A, vol.528, issue.24, pp.247368-7374, 2011. ,
DOI : 10.1016/j.msea.2011.06.028
URL : https://hal.archives-ouvertes.fr/hal-00632698
Processing and mechanical properties of autogenous titanium implant materials, J. Mater.Sci, pp.13-397, 2002. ,
Mechanical properties and osteoconductivity of porous bioactive titanium, Bioma-terials, pp.6014-6023, 2005. ,
Mechanical properties of open-pore titanium foam, Journal of Biomedical Materials Research Part A, vol.53, issue.4 ,
DOI : 10.1002/jbm.a.31118
Processing of titanium foams using magnesium spacer particles, Scripta Materialia, vol.56, issue.5, pp.341-344, 2007. ,
DOI : 10.1016/j.scriptamat.2006.11.010
Effect of Oxygen Concentration and Distribution on the Compression Properties on Titanium Foams, Advanced Engineering Materials, vol.23, issue.9, pp.868-876, 2008. ,
DOI : 10.1002/adem.200800122
Processing and properties of porous titanium using space holder technique, Materials Science and Engineering: A, vol.506, issue.1-2, pp.148-151, 2009. ,
DOI : 10.1016/j.msea.2008.11.022
Investigation of spacer size effect on architecture and mechanical properties of porous titanium, Materials Science and Engineering: A, vol.530, pp.530633-642, 2011. ,
DOI : 10.1016/j.msea.2011.10.036
URL : https://hal.archives-ouvertes.fr/hal-00664738
Fast X-ray tomography analysis of bubble growth and foam setting during breadmaking, Journal of Cereal Science, vol.43, issue.3, pp.393-397, 2006. ,
DOI : 10.1016/j.jcs.2005.12.002
URL : https://hal.archives-ouvertes.fr/hal-00141792
Image analysis of X-ray microtomogrames of Pd-Ag/SiO2 xerogel catalysts supported in Al 2 O 3 foams, Colloids and Surface A, pp.241-201, 2004. ,
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.719-730, 2005. ,
DOI : 10.1016/j.actamat.2004.10.024
URL : https://hal.archives-ouvertes.fr/hal-00436799