. M. Aud, D. Audebert, M. Dhima, A. Taazount, and . Bouchaïr, Behavior of dowelled and bolted steelto-timber connections exposed to fire, Engineering Structure, vol.39, pp.116-125, 2012.

M. Balasubramanian, V. Jayabalan, and V. Balasubramanian, Developing mathematical models to predict grain size and hardness of argon tungsten pulse current arc welded titanium alloy, Journal of Materials Processing Technology, vol.196, issue.1-3, pp.222-229, 2008.
DOI : 10.1016/j.jmatprotec.2007.05.039

M. Balasubramanian, V. Jayabalan, and V. Balasubramanian, Developing mathematical models to predict tensile properties of pulsed current gas tungsten arc welded Ti???6Al???4V alloy, Materials & Design, vol.29, issue.1, pp.92-97, 2008.
DOI : 10.1016/j.matdes.2006.12.001

]. A. Baptista and J. P. Muzeau, Analytical formulation of the elastic-plastic behavior of bisymmetrical steel shapes, Journal of constructional steel research, vol.62, pp.6-7, 2006.

]. A. Baptista, Analytical Criteria for the Evaluation of the Internal Forces at the Elastic and Plastic Limit States of Lozenge and Triangular Cross-Sections, European conference on computational mechanics solids, structures and coupled problems in engineering, 2006.
DOI : 10.1007/1-4020-5370-3_105

M. Baptista, Criterio de interaccao entre o esforco normal e o momento flector em seccoes de aco em I monossimetricas totalmente plastificadas, JPEE, 2006.

. A. Bap and . Baptista, Plastic reserve capacity of hot rolled steel sections " , RENE MAQUOI 65 th birthday anniversary 14, 2007.

. S. Bas, S. M. Bassily, and . Dickinson, Buckling and lateral vibration of rectangular plates subject to in-plane loads-a Ritz approach, Journal of Sound and Vibration, vol.24, pp.219-239, 1972.

. O. Bed and . Bedair, Influence of in-plane restraint on the buckling behavior of plates under uniform compression, shear and in-plane bending, Computer methods in applied mechanics and engineering, vol.148, pp.1-10, 1997.

. P. Bez, T. Bezkorovainy, K. Burns, . Jr, and . Rasmussen, Strength curves for metal plates in compression, 2002.

R. Bibliographiques, BITAR, «Vérification à l'ELU des poutres métalliques avec ouvertures d'âme, exemple de calcul et recommandations», Revue Construction Métallique (CTICM), n°1, pp.80-98, 1998.

. D. Bit, P. Bitar, and . Maitre, « Poutres mixtes de bâtiment avec ouverture isolée dans l'âme démarche de vérification et exemple de calcul », revue CM n°4, 2001.

. D. Bit, M. P. Bitar, . Galea-y, and . Demarco-t, « Poutres cellulaires acier et mixtes : Partie 1, proposition d'un modèle pour la résistance des montants, Revue Construction Métallique (CTICM), n°1, pp.15-39, 2006.

. F. Ble, . A. Bleich-m, S. T. Bradford, D. J. Smith, and . Oehlers, Buckling Strength of Metal Structures Semi-compact steel plates with unilateral restraint subjected to bending, compression and shear, Journal of Constructional Steel Research, vol.56, pp.47-67, 1952.

. P. Bul and . Bulson, The Stability of Flat Plates, Chatto&Windus, 1970.

1. Che, J. Cheng, S. Miao, and . Wu, Investigating the effects of operational factors on PEMFC performance based CFD simulations using a three-level full factorial design, Renewable Energy, vol.39, pp.250-260, 2012.

]. K. Chung and R. M. Lawson, Simplified design of composite beams with large web openings to Eurocode 4, Journal of Constructional Steel Research, vol.57, issue.2, pp.1-1135, 2001.
DOI : 10.1016/S0143-974X(00)00011-0

]. K. Chung, T. Liu, and A. Ko, Investigation on Vierendeel mechanism in steel beams with circular web openings, Journal of Constructional Steel Research, vol.57, issue.5, pp.467-490, 2001.
DOI : 10.1016/S0143-974X(00)00035-3

. K. Chu, T. Chung, A. Liu, and . Ko, Steel beams with large web openings of various shapes and sizes: an empirical design method using a generalized moment shear interaction curve, Journal of Constructional Steel Research, vol.59, pp.1177-1200, 2003.

. D. Dar and . Darwin, Design of Steel and Composite Beams with Web Openings, AISC, issue.2, 2003.

. S. Dur, O. Durif, A. Vassart, J. P. Bouchaïr, and . Muzeau, « Modèle mécanique pour les poutres à larges ouvertures d'âmes de section variable », 29èmes Rencontres Universitaires de Génie Civil, AUGC, vol.1, pp.345-355, 2011.

]. S. Durif, A. Bouchaïr, and O. Vassart, Experimental and numerical investigations on cellular beams with sinusoidal openings, ENGINEERING STRUCTURES, pp.12-13

. Ec and . Semi-comp, Plastic member capacity of semi-compact steel sections-a more economic design, Research fund for Coal and Steel, 2009.

. E. Eha and . Ehab, Interaction of buckling modes in castellated steel beams, Journal of Constructional Steel Research, vol.67, pp.814-825, 2011.

. E. Eha and . Ehab, Nonlinear analysis of cellular steel beams under combined buckling modes, Thin Walled Structures, vol.52, pp.66-79, 2012.

. J. Fra, V. K. Franssen, J. Kodur, and . Mason, Elements of theory for SAFIR, 2002.

. J. Fra and . Franssen, User's manual for safir a computer program for analysis of structures subjected to fire, 2007.

. A. Gan, S. M. Gandomi, M. O. Tabatubai, A. Moradian, A. H. Radfar et al., A new prediction model for the load capacity of castellated steel beams, Journal of Constructional Steel Research, vol.67, pp.1096-1105, 2011.

. N. Hag and . Hagen, Shear capacity of steel plate girders with large web openings, Part I: Modeling and simulations, Journal of Constructional Steel Research, vol.65, pp.142-150, 2009.

. R. Hoff, D. Hoffman, S. Dinehart, J. Gross, and . Yost, Analysis of Stress Distribution and Failure Behavior of Cellular Beams, p.2012

. B. Joh, M. Johansson, and . Veljkovic, Steel plated structures, Progress Structural Engineering, vol.3, pp.13-27, 2001.

. B. Joh, R. Johansson, G. Maquoi, C. Sedlacek, D. Müller et al., Commentary and worked examples to EN 1993-1-5 « plated structural elements, JRC Scientific and Technical Reports, 2007.

. J. Kan, A. W. Kang, and . Leissa, Exact solutions for the buckling of rectangular plates having varying in-plane loading on two opposite simply supported edges, International Journal of Solids and Structures, vol.42, pp.4220-4238, 2005.

. D. Ker, D. A. Kerdal, and . Nethercot, Failure modes of castellated beams, Journal of constructional steel research, vol.4, pp.295-315

. M. Kno, M. Knobloch, and . Fontana, Strain based approach to local buckling of steel sections subjected to fire, pp.44-67, 2006.

. J. Kol and . Kolosowski, Stresses and deflexions in castellated beams, The structural engineer n°1, 1964.

. N. Lag, D. P. Lagaros, M. Lemonis, G. Papadrakakis, and . Panagitou, Optimum design of steel structures with web openings, Engineering Structures, vol.30, pp.2528-2537, 2008.

. R. Law and . Lawson, Design for openings in the webs of composite beams, 1987.

. R. Law, J. Lawson, S. J. Lim-j, W. I. Hicks, and . Simms, Design of composite asymmetric cellular beams and beams with large web openings, Journal of Constructional Steel Research, vol.6, issue.62, pp.614-629, 2005.

. K. Le and . Le, Identification des caractéristiques aléatoires de remblais à partir du suivi de santé des structures : application aux structures portuaires, Nantes Faculté des sciences et des techniques, 2012.

. V. Lia, N. E. Lian, and . Shanmugam, Design of horizontally curved plate girder webs containing circular openings, Thin-Walled Structures, vol.42, pp.719-739, 2004.

. Liu, K. Liu, and . Chung, Steel beams with large web openings of various shapes and sizes: finite element investigation, Journal of Constructional Steel Research, vol.59, issue.9, pp.1159-1176, 2003.
DOI : 10.1016/S0143-974X(03)00030-0

R. Bibliographiques, [. F. Mad, F. Madadi, M. Ashrafizadeh, and . Shamanian, Optimization of pulsed TIG cladding process of satellite ally on carbon steel using RSM, Journal of alloy and compounds, vol.510, pp.71-77, 2012.

]. P. Mangin and B. A. , ArcelorMittal Cellular Beams Logiciel ACB+ : Descriptif technique, Rapport technique n°7, pp.72-73, 2009.

. R. Maq, M. Maquoi, and . Skaloud, Stability of plates and plated structures, Journal of Constructional Steel Research, vol.55, issue.1-3, pp.45-68, 2000.
DOI : 10.1016/S0143-974X(99)00077-2

. A. Moh, H. Mohebkhah, and . Showkati, Bracing requirements for inelastic castellated beams, Journal of Constructional Steel Research, vol.61, pp.1373-1386, 2005.

. A. Nad, O. Nadjai, and . Vassart, Performance of cellular composite floor beams at elevated temperatures, Fire safety journal, vol.42, pp.489-497, 2007.

. Nai, A. El-hadi-naili, S. Nadjai, F. Han, S. Ali et al., Experimental and numerical modeling of cellular beams with circular and elongated web openings at elevated temperatures, Journal of Structural Fire Engineering, vol.2, p.4, 2011.

. R. Nar, N. Narayanan, D. Gara-verni, and . Avanessian, Design of slender web shaving rectangular holes, Journal of Structural Engineering, vol.111, issue.4, pp.777-787, 1985.

. J. Pai, A. K. Paik, and . Thayamballi, Buckling strength of steel plating with elastically restrained edges, Thin-Walled Structures, vol.37, pp.27-55, 2000.

H. Showkati, T. Ghanbari, A. Noori, and T. Zirakian, SADO, « Les plans d'expériences : de l'expérimentation à l'assurance Experiments on elastically braced castellated beams, Journal of Constructional Steel Research, vol.1277, pp.163-172, 1991.

. S. Smi, M. A. Smith, D. J. Bradford, and . Oehlers, Elastic buckling of unilaterally constrained rectangular plates in pure shear, Engineering Structures, vol.21, pp.443-453, 1999.

. C. Soa, J. M. Soares, and . Gordo, Collapse strength of rectangular plates under transverse compression, Journal of Constructional Steel Research, vol.36, pp.21-234, 1996.

. M. Sol, A. Soltani, M. Bouchaïr, and . Mimoune, Nonlinear FE analysis of the ultimate behavior of steel castellated beams, press doing: 10,1016/j.jcsr, p.16, 2011.

. S. Swa, R. J. Swartz, and . O-'neill, Linear elastic Buckling of Plates subjected to combined loads, Thin Walled Structures, vol.21, pp.1-15, 1995.

. A. Swe and . Sweedan, Elastic lateral stability of I-shaped cellular steel beams, Journal of Constructional Steel Research, vol.67, pp.151-163, 2011.

]. S. Timoshenko, Application d'une nouvelle méthode à la recherche de la stabilité de certaines parties constitutives des ponts première partie », Annales des Ponts et Chaussées 1913-I, p.496, 1913.

. S. Tim and . Timoshenko, Strength of Materials-Part 1 : Elementary Theory and Problems, 1940.

. K. Tsa and . Tsavdaridis, Structural Performance of perforated steel beams with novel web openings and with partial concrete encasement, Thèse de doctorat, 2010.

. K. Tsa, C. D. Tsavdaridis, and . Mello, Web buckling study of the behaviour and strength of perforated steel beams with different novel web openings shapes, Journal of Constructional Steel Research, vol.67, pp.1605-1620, 2011.

]. O. Vassart, Analytical Model for cellular beams made of hot rolled sections in case of fire, Références Bibliographiques [VAS Thèse de doctorat, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00860914

. M. Vel and A. Veljkovic, Large web openings for service integration in composite floors, 2006.

. J. War and . Ward, Design of Composite and Non-Composite Cellular Beams, 1990.

. Won, . B. Wong-v, . Burges-i, and . Plank-r, Behaviour of Composite Cellular Steel-Concrete Beams at Elevated Temperatures, International Journal of Steel Structures, vol.9, pp.29-37, 2009.

. T. Yam, S. Yamashita, and . Kato, Elastic buckling characteristics of two-way grid shells of single layer and its application to evaluate the non-linear behavior and ultimate strength, Journal of constructional steel research, vol.57, pp.1289-1308, 2001.

]. T. Zirakian and H. Showkati, The finite element method The basis Distortional buckling of castellated beams, Journal of Constructional Steel Research, vol.162, pp.863-871, 2000.