E. Koscher, Effet du cisaillement sur la cristallisation du polypropylène : Aspects cinétiques et morphologiques, Matériaux polymères et composite, p.173, 2002.

G. Natta and P. C. , Crystal structure of new type of polypropylene, Atti Accad. Nazl.Lincei-Memorie, issue.4, p.73, 1955.

G. Natta and P. C. , Structure and properties of isotactic polypropylene, Il Nuovo Cimento, vol.7, issue.8, p.40, 1960.
DOI : 10.1007/BF02731859

M. Hikosaka, T. Seto, O. Of, . Chains, . Isotactic et al., The Order of the Molecular Chains in Isotactic Polypropylene Crystals, Polymer Journal, vol.14, issue.2, pp.111-127, 1973.
DOI : 10.1002/pol.1962.1206217307

Z. Mencik, C. Of, and . Polypropylene, Crystal structure of isotactic polypropylene, Journal of Macromolecular Science, Part B, vol.11, issue.1, p.101, 1972.
DOI : 10.1080/00222347208224792

. Binsberg, B. G. Fl, M. Delange, . Of, . Crystallized et al., Morphology of polypropylene crystallized from the melt, Polymer, vol.9, issue.1, p.23, 1968.
DOI : 10.1016/0032-3861(68)90006-2

D. R. Norton, A. Keller, T. Spherulitic, . Lamellar, . Of-melt-crystallized et al., The spherulitic and lamellar morphology of melt-crystallized isotactic polypropylene, Polymer, vol.26, issue.5, pp.704-716, 1985.
DOI : 10.1016/0032-3861(85)90108-9

B. Lotz, alpha and beta phases of isotactic polypropylene: a case of growth kinetics 'phase reentrency' in polymer crystallization, Polymer, pp.39-4561, 1998.

D. L. Dorset, Isotactic polypropylene, ??-phase: a study in frustration, Polymer, vol.39, issue.25, pp.6331-6337, 1998.
DOI : 10.1016/S0032-3861(97)10160-4

J. X. Li and W. L. Cheung, Conversion of growth and recrystallisation of beta-phase in doped iPP, Polymer, issue.8, pp.40-2085, 1999.

W. Stocker, Epitaxial Crystallization and AFM Investigation of a Frustrated Polymer Structure:?? Isotactic Poly(propylene), ?? Phase, Macromolecules, vol.31, issue.3, pp.31-807, 1998.
DOI : 10.1021/ma971345d

E. Koscher, R. Fulchiron-varga, J. , J. Kargerkocsis, and D. Composites, Influence of shear on polypropylene crystallization: morphology development and kinetics, Polymer, vol.43, issue.25, pp.43-6931, 1993.
DOI : 10.1016/S0032-3861(02)00628-6

J. Varga and J. Kargerkocsis, Rules of supermolecular structure formation in sheared isotactic polypropylene melts, Journal of Polymer Science Part B: Polymer Physics, vol.8, issue.4, pp.657-670, 1996.
DOI : 10.1002/(SICI)1099-0488(199603)34:4<657::AID-POLB6>3.0.CO;2-N

C. M. Wu, M. Chen, and J. Karger-kocsis, Micromorphologic feature of the crystallization of isotactic polypropylene after melt-shearing, Polymer Bulletin, vol.41, issue.4, pp.493-499, 1998.
DOI : 10.1007/s002890050392

S. V. Meille, S. Bruckner, W. Porzio, G. Structure, . Nonparallel et al., ??-Isotactic polypropylene. A structure with nonparallel chain axes, Macromolecules, vol.23, issue.18, pp.4114-4121, 1990.
DOI : 10.1021/ma00220a014

S. V. Meille, Structure of .beta.-Isotactic Polypropylene: A Long-Standing Structural Puzzle, Macromolecules, vol.27, issue.9, pp.2615-2622, 1994.
DOI : 10.1021/ma00087a034
URL : https://hal.archives-ouvertes.fr/hal-01378757

J. Varga, . Supermolecular, . Of, and . Polypropylene, Supermolecular structure of isotactic polypropylene, Journal of Materials Science, vol.77, issue.159, pp.2557-2579, 1992.
DOI : 10.1007/BF00540671

C. Angelloz, Crystallization of Isotactic Polypropylene under High Pressure (?? Phase), Macromolecules, vol.33, issue.11, pp.4138-4145, 2000.
DOI : 10.1021/ma991813e

K. Mezghani and P. J. , Solidification and melting of isotactic polypropylene, Conférence ANTEC, pp.1492-1496, 1995.

G. Natta, P. C. , and M. Peraldo, Smectic mesomorphic form of isotactic polypropylene, Rend. Accad. Naz. Lincei, issue.26, p.1959

G. Natta, I. Progress, . The, and . Polymerization, Makromolekulare Chemie, pp.94-131, 1960.

P. B. Mcallister, T. J. Carter, R. M. Hinde, S. Of, . Form et al., Structure of the quenched form of polypropylene, Journal of Polymer Science: Polymer Physics Edition, vol.16, issue.1, pp.49-57, 1978.
DOI : 10.1002/pol.1978.180160105

R. Androsch, Mesophases in polyethylene, polypropylene, and poly(1-butene) Polymer, pp.51-4639, 2010.

Q. Zia, Morphology, reorganization and stability of mesomorphic nanocrystals in isotactic polypropylene, Polymer, vol.47, issue.24, pp.47-8163, 2006.
DOI : 10.1016/j.polymer.2006.09.038

D. Mileva, Temperature of Melting of the Mesophase of Isotactic Polypropylene, Macromolecules, vol.42, issue.19, pp.42-7275, 2009.
DOI : 10.1021/ma901797b

Q. Zia, H. J. Radusch, and R. Androsch, Direct analysis of annealing of nodular crystals in isotactic polypropylene by atomic force microscopy, and its correlation with calorimetric data. Polymer, pp.48-3504, 2007.

Q. Zia, H. J. Radusch, and R. Androsch, Deformation behavior of isotactic polypropylene crystallized via a mesophase, Polymer Bulletin, vol.45, issue.Suppl 1, pp.755-771, 2009.
DOI : 10.1007/s00289-009-0151-y

J. Qiu, Deformation-induced highly oriented and stable mesomorphic phase in quenched isotactic polypropylene, Polymer, vol.48, issue.23, pp.48-6934, 2007.
DOI : 10.1016/j.polymer.2007.08.066

R. De, P. Daubenay, and C. W. , The crystal structure of poly(ethylene terephtalate), Proc. Roy. Soc, pp.531-542, 1954.

M. Cakmak, J. L. , and J. Spruiell, Dynamics of stretch blow moldingpoly(ethylene terephtalate) Antec: New Orleans, Louisianne Microstructure rearrangement during the heattreatment of melt-drawn poly(etylene terephtalate) fibers, Journal of Polymer Science, vol.21, pp.920-923, 1927.

P. Lapersonne, ETHYLENE- TEREPHTHALATE) FILMS .1. CHARACTERIZATION OF THE CRYSTALLINE PHASE, Polymer, issue.18, pp.32-3331, 1991.

D. J. Blundell, Characterization of strain-induced crystallization of poly(ethylene terephthalate) at fast draw rates using synchrotron radiation, Polymer, vol.37, issue.15, pp.37-3303, 1996.
DOI : 10.1016/0032-3861(96)88476-X

D. Kawakami, Structural formation of amorphous poly(ethylene terephthalate) during uniaxial deformation above glass temperature Polymer Dynamics of polymeric liquids On slow flow approximations of fluids with fading memory. Viscoelasticity and Rheology, FOUNDATIONS OF LINEAR VISCOELASTICITY. Reviews of Modern Physics, vol.45, issue.12, pp.905-918, 1961.

R. Tanner and . Engineering-rheology, Elastics Liquids Elastic Stress-Strain Relations in Perfect Elastic Fluids, Journal of Rheology, issue.91, pp.27-39, 1964.

M. H. Wagner, . Analysis, . Time-dependent, . Nonlinear-stress-growth, . Data et al., Analysis of time-dependent non-linear stress-growth data for shear and elongational flow of a low-density branched polyethylene melt, Rheologica Acta, vol.61, issue.2, pp.136-142, 1976.
DOI : 10.1007/BF01517505

M. H. Wagner, C. Analysis, . Uniaxial, . Flow, . Of et al., A constitutive analysis of uniaxial elongational flow data of low-density polyethylene melt, Journal of Non-Newtonian Fluid Mechanics, vol.4, issue.1-2, pp.39-55, 1978.
DOI : 10.1016/0377-0257(78)85005-8

J. L. White, N. Tokita, A. Additive, . Theory, . Viscoelastic et al., An Additive Functional Theory of Viscoelastic Deformation with Application to Amorphous Polymers, Solutions and Vulcanizates, Journal of the Physical Society of Japan, vol.22, issue.3, p.719, 1967.
DOI : 10.1143/JPSJ.22.719

M. H. Wagner, . Network, . Of, and . Melts, Zur Netzwerktheorie von Polymer-Schmelzen, Rheologica Acta, vol.89, issue.1, pp.33-50, 1979.
DOI : 10.1007/BF01515686

M. H. Wagner, . Elongational, . Behavior, . Polymer, . In et al., Elongational behaviour of polymer melts in constant elongation-rate, constant tensile stress, and constant tensile force experiments, Rheologica Acta, vol.18, issue.6, pp.681-692, 1979.
DOI : 10.1007/BF01533342

M. H. Wagner, S. E. Stephenson, I. Assumption, . Network, . In et al., The Irreversibility Assumption of Network Disentanglement in Flowing Polymer Melts and its Effects on Elastic Recoil Predictions, Journal of Rheology, vol.23, issue.4, pp.489-504, 1979.
DOI : 10.1122/1.549529

M. H. Wagner, S. E. Stephenson, S. -. Strain, . For, . Liquids et al., The spike-strain test for polymeric liquids and its relevance for irreversible destruction of network connectivity by deformation, Rheologica Acta, vol.14, issue.4, pp.463-468, 1979.
DOI : 10.1007/BF01736952

K. Osaki-rolon-garrido, V. H. , and M. H. Wagner, Nonlinear viscoelasticity and polymer chain entanglement The damping function in rheology, Nagasawa. Rheologica Acta, vol.56, issue.3, pp.48-245, 1988.

H. M. Laun, . Description, . Of, . Shear, . Of et al., Description of the non-linear shear behaviour of a low density polyethylene melt by means of an experimentally determined strain dependent memory function, Rheologica Acta, vol.8, issue.1, pp.1-15, 1978.
DOI : 10.1007/BF01567859

A. C. Papanastasiou, L. E. Scriven, C. W. Macosko, A. Integral, . Equation et al., An Integral Constitutive Equation for Mixed Flows: Viscoelastic Characterization, Journal of Rheology, vol.27, issue.4, pp.387-410, 1983.
DOI : 10.1122/1.549712

R. G. Larson, . Constitutive, . For, . Materials, . Power-law et al., Constitutive relationships for polymeric materials with power-law distributions of relaxation times, Rheologica Acta, vol.17, issue.4, pp.327-334, 1985.
DOI : 10.1007/BF01333961

P. R. Soskey, H. H. Winter, L. Step, . Strain, . With-parallel-disk et al., Large Step Shear Strain Experiments with Parallel???Disk Rotational Rheometers, Journal of Rheology, vol.28, issue.5, pp.625-645, 1984.
DOI : 10.1122/1.549770

R. Fulchiron, V. Verney, and G. Marin, Determination of the elongational behavior of polypropylene melts from transient shear experiments using Wagner's model, Journal of Non-Newtonian Fluid Mechanics, vol.48, issue.1-2, pp.49-61, 1993.
DOI : 10.1016/0377-0257(93)80064-I

M. Doi, S. F. Edwards, D. Of, . Polymer, and . Systems, MOLECULAR-MOTION UNDER FLOW, Journal of the Chemical Society-Faraday Transactions Ii, vol.2, issue.74, pp.1802-1817, 1978.

M. Doi and S. F. Edwards, Dynamics of concentrated polymer systems. Part 4.???Rheological properties, J. Chem. Soc., Faraday Trans. 2, vol.75, issue.0, pp.38-54, 1979.
DOI : 10.1039/F29797500038

M. Doi, S. F. Gennes, P. G. Kausch, and H. , The Theory of polymer dynamics International series of monographs on physics. 73 Scaling Concepts Polymer Systems Cornell University press Ithaca, Matériaux polymères : Propriétés mécaniques et physiques Traité des matériaux DAMPING FUNCTIONS AND CHAIN RELAXATION IN UNIAXIAL AND BIAXIAL EXTENSIONS -COMPARISON WITH THE DOI- EDWARDS THEORY. Macromolecules, pp.28-7196, 1979.

P. K. Currie, . Constitutive-equations, . For, . Melts, . By et al., Constitutive equations for polymer melts predicted by the Doi???Edwards and Curtiss???Bird kinetic theory models, Journal of Non-Newtonian Fluid Mechanics, vol.11, issue.1-2, pp.53-68, 1982.
DOI : 10.1016/0377-0257(82)85015-5

G. Marrucci, . Rheology, . Rodlike, . In, . Nematic et al., Rheology of rodlike polymers in the nematic phase with tumbling or shear orientation, Rheologica Acta, vol.23, issue.6, pp.523-528, 1990.
DOI : 10.1007/BF01329298

M. H. Wagner, J. Schaeffer, R. And, . Melts-universal, . Of et al., Rubbers and polymer melts: Universal aspects of nonlinear stress???strain relations, Journal of Rheology, vol.37, issue.4, pp.643-661, 1993.
DOI : 10.1122/1.550388

M. H. Wagner and J. S. Theo, Applied Rheol, Proc. XIth, in International Congress on rheology, pp.17-21, 1992.

M. H. Wagner, J. Schaeffer, A. Of, . Strain, . Measures et al., Assessment of nonlinear strain measures for extensional and shearing flows of polymer melts, Rheologica Acta, vol.37, issue.6, pp.506-516, 1994.
DOI : 10.1007/BF00366335

G. Marrucci, . Mechanical, . For, . Containing, and . Entanglements, A mechanical model for rubbers containing entanglements, Rheologica Acta, vol.254, issue.1, pp.193-198, 1979.
DOI : 10.1007/BF01542766

W. W. Graessley, Advances in polymer science, 1982.

N. Phan-thien and R. Itanner, A new constitutive equation derived from network theory, Journal of Non-Newtonian Fluid Mechanics, issue.2, pp.353-365, 1977.

S. E. Stephenson, Limitations of the Phan-Thien non-linear network viscoelastic model, Rheologica Acta, vol.5, issue.1, pp.66-68, 1986.
DOI : 10.1007/BF01369982

N. Phan-thien and T. Mcleish, A Nonlinear Network Viscoelastic Model, Journal of Rheology, vol.22, issue.3, pp.259-283, 1978.
DOI : 10.1122/1.549481

D. S. De-focatiis and C. P. , Solid-state predictions for oriented glassy polymer using a combined melt-solid constitutive model, Polymer Processing Society, 2010.

C. Gerlach, C. P. Buckley, D. P. Jones-likhtman, and A. E. , Development of an integrated approach to modelling of polymer film orientation processes. Chemical Engineering Research & Design Simple constitutive equation for linear polymer melts derived from molecular theory: Rolie-Poly equation, Journal of Non-Newtonian Fluid Mechanics, vol.76, issue.1141, pp.38-44, 1998.

F. Sadeghi, P. J. Carreau, P. Of, . Stretched, and . Films, Properties of uniaxially stretched polypropylene films, The Canadian Journal of Chemical Engineering, vol.31, issue.6, pp.1103-1110, 2008.
DOI : 10.1002/cjce.20109

S. H. Tabatabaei, P. J. Carreau, and A. Aji, Structure and properties of MDO stretched polypropylene, Polymer, vol.50, issue.16, pp.50-3981, 2009.
DOI : 10.1016/j.polymer.2009.06.059

S. H. Tabatabaei, P. J. Carreau, and A. Ajji, Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation, Polymer, vol.50, issue.17, pp.50-4228, 2009.
DOI : 10.1016/j.polymer.2009.06.071

Y. G. Zhou, L. S. Turng, and C. Y. Shen, Morphological evolution and orientation development of stretched iPP films: Influence of draw ratio, Journal of Polymer Science Part B: Polymer Physics, vol.31, issue.11, pp.48-1223, 2010.
DOI : 10.1002/polb.22013

T. Lupke, Sequential biaxial drawing of polypropylene films, Polymer, vol.45, issue.20, pp.45-6861, 2004.
DOI : 10.1016/j.polymer.2004.07.075

P. Rizzo, Crystalline phase orientation in biaxially stretched isotactic polypropylene films, Macromolecular Symposia, pp.53-63, 2002.
DOI : 10.1002/1521-3900(200208)185:1<53::AID-MASY53>3.0.CO;2-N

A. Kmetty, T. Barany, and J. Karger-kocsis, Self-reinforced polymeric materials: A review, Progress in Polymer Science, vol.35, issue.10, pp.35-1288, 2010.
DOI : 10.1016/j.progpolymsci.2010.07.002

Y. Koike and M. Cakmak, The influence of molten fraction on the uniaxial deformation behavior of polypropylene: Real time mechano-optical and atomic force microscopy observations, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.6, pp.44-925, 2006.
DOI : 10.1002/polb.20756

F. Zuo, The role of interlamellar chain entanglement in deformation-induced structure changes during uniaxial stretching of isotactic polypropylene. Polymer, pp.48-6867, 2007.

A. Boger, Stress-induced changes in microstructure of a low-crystalline polypropylene investigated at uniaxial stretching, Journal of Applied Polymer Science, vol.35, issue.49, pp.188-199, 2006.
DOI : 10.1002/app.29282

Y. Nozue, Deformation Behavior of Isotactic Polypropylene Spherulite during Hot Drawing Investigated by Simultaneous Microbeam SAXS-WAXS and POM Measurement, Macromolecules, vol.40, issue.6, pp.40-2036, 2007.
DOI : 10.1021/ma061924v

A. Peterlin, . Molecular, . Of, . Polyethylene, and . Polypropylene, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, p.490, 1971.
DOI : 10.1007/BF00550305

A. Galeski, Strength and toughness of crystalline polymer systems, Progress in Polymer Science, vol.28, issue.12, pp.1643-1699, 2003.
DOI : 10.1016/j.progpolymsci.2003.09.003

X. F. Lu and J. N. Hay, Isothermal crystallization kinetics and melting behaviour of poly(ethylene terephthalate) Polymer, pp.42-9423, 2001.

J. Radhakrishnan and A. Kaito, Structure formation during the isothermal crystallization of oriented amorphous poly(ethylene terephthalate) films. Polymer, pp.42-3859, 2001.

Y. Marco, L. Chevalier, and M. Chaouche, WAXD study of induced crystallization and orientation in poly(ethylene terephthalate) during biaxial elongation, Polymer, vol.43, issue.24, pp.43-6569, 2002.
DOI : 10.1016/S0032-3861(02)00488-3

D. Kawakami, New Insights into Lamellar Structure Development and SAXS/WAXD Sequence Appearance during Uniaxial Stretching of Amorphous Poly(ethylene terephthalate) above Glass Transition Temperature, Macromolecules, vol.41, issue.8, pp.41-2859, 2008.
DOI : 10.1021/ma702554t

R. Fulchiron, C. Gauthier, and G. Vigier, Effects of the crystallinity on the Betarelaxation of Poly(ethylene-terephtalate) Acta Polymer, pp.313-315, 1993.

J. A. Van-dommelen, Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, issue.3, pp.51-519, 2003.

D. W. Lai, I. Yakimets, and M. Guigon, A non-linear viscoelastic model developed for semi-crystalline polymer deformed at small strains with loading and unloading paths, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, pp.266-271, 2005.
DOI : 10.1016/j.msea.2005.06.011

G. Ayoub, Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling, International Journal of Plasticity, vol.27, issue.4, pp.492-511, 2011.
DOI : 10.1016/j.ijplas.2010.07.005
URL : https://hal.archives-ouvertes.fr/hal-00574734

S. Nikolov, R. A. Lebensohn, and D. Raabe, Self-consistent modeling of large plastic deformation, texture and morphology evolution in semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, vol.54, issue.7, pp.54-1350, 2006.
DOI : 10.1016/j.jmps.2006.01.008

D. R. Breese and G. Beaucage, Modeling the mechanical properties of highly oriented polymer films: A fiber/gel composite theory approach, Journal of Polymer Science Part B: Polymer Physics, vol.39, issue.6, pp.46-607, 2008.
DOI : 10.1002/polb.21396

V. N. Kytopoulos, G. D. Bourkas, and E. Sideridis, Some new operational modes and parameters of stress relaxation for the viscoelastic characterization of solid polymers. III. The area ratio mode and the intrinsic ?strain-clock? function, Journal of Applied Polymer Science, vol.11, issue.2, pp.149-158, 2003.
DOI : 10.1002/app.11168

A. Sedighiamiri, Micromechanical modeling of the elastic properties of semicrystalline polymers: A three-phase approach, Journal of Polymer Science Part B: Polymer Physics, vol.47, issue.20, pp.48-2173, 2010.
DOI : 10.1002/polb.22099

O. Gueguen, A new three-phase model to estimate the effective elastic properties of semi-crystalline polymers: Application to PET, Mechanics of Materials, vol.42, issue.1, pp.1-10, 2010.
DOI : 10.1016/j.mechmat.2009.04.012
URL : https://hal.archives-ouvertes.fr/hal-00506682

L. Chevalier and Y. Marco, Identification of a strain induced crystallisation model for PET under uni- and bi-axial loading: Influence of temperature dispersion, Mechanics of Materials, vol.39, issue.6, pp.39-596, 2007.
DOI : 10.1016/j.mechmat.2006.09.001
URL : https://hal.archives-ouvertes.fr/hal-00693498

A. Poitou, Crystallization of polymers under strain: from molecular properties to macroscopic models, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.28-30, pp.28-30, 2003.
DOI : 10.1016/S0045-7825(03)00349-9
URL : https://hal.archives-ouvertes.fr/hal-01006710

C. O. Phillips, T. C. Claypole, and D. T. Gethin, Mechanical properties of polymer films used in in-mould decoration, Journal of Materials Processing Technology, vol.200, issue.1-3, pp.1-3, 2008.
DOI : 10.1016/j.jmatprotec.2007.09.014

S. Chen, Study on the thermoforming of PC films used for in-mold decoration, International Communications in Heat and Mass Transfer, vol.35, issue.8, pp.35-967, 2008.
DOI : 10.1016/j.icheatmasstransfer.2008.04.008

J. D. Ferry, Viscoelastic properties of polymers, 1980.

A. Benallal, Linear viscoelasticity revisited: the relaxation function of monodisperse polymer melts, Macromolecules, vol.26, issue.26, pp.7229-7235, 1993.
DOI : 10.1021/ma00078a018

Y. W. Leong, The effect of molding conditions on mechanical and morphological properties at the interface of film insert injection molded polypropylene-film/polypropylene matrix, Polymer Engineering and Science, vol.71, issue.90, pp.44-2327, 2004.
DOI : 10.1002/pen.20260

R. Fulchiron, V. Verney, G. Marin, D. Of, . Elongational et al., Determination of the elongational behavior of polypropylene melts from transient shear experiments using Wagner's model, Journal of Non-Newtonian Fluid Mechanics, vol.48, issue.1-2, pp.49-61, 1993.
DOI : 10.1016/0377-0257(93)80064-I

R. Fulchiron, Etude des corrélations entre les caractéristiques moléculaires, le comportement rhéologique en cisaillement et en élongation et l', Matéraiux macromoléculaires et composites, p.159, 1992.

E. Voyiatzis, C. J. Tsenoglou, and A. G. Boudouvis, On Hadamard stability and dissipative stability of the molecular stress function model of non-linear viscoelasticity, International Journal of Non-Linear Mechanics, vol.44, issue.7, pp.44-727, 2009.
DOI : 10.1016/j.ijnonlinmec.2009.03.002

P. K. Currie, Constitutive equations for polymer melts predicted by the Doi???Edwards and Curtiss???Bird kinetic theory models, Journal of Non-Newtonian Fluid Mechanics, vol.11, issue.1-2, pp.53-58, 1982.
DOI : 10.1016/0377-0257(82)85015-5

K. Yu, 3D modeling of dual wind-up extensional rheometers, Journal of Non-Newtonian Fluid Mechanics, vol.165, issue.1-2, pp.14-23, 2010.
DOI : 10.1016/j.jnnfm.2009.08.006

H. M. Laun, . Prediction, . Of, . Strains, . Polymer et al., Prediction of Elastic Strains of Polymer Melts in Shear and Elongation, Journal of Rheology, vol.30, issue.3, pp.459-501, 1986.
DOI : 10.1122/1.549855

A. Nishioka, Description of uniaxial, biaxial, and planar elongational viscosities of polystyrene melt by the K-BKZ model, Journal of Non-Newtonian Fluid Mechanics, vol.89, issue.3, pp.287-301, 2000.
DOI : 10.1016/S0377-0257(99)00047-6

E. Gorlier, Experimental and theoretical study of uniaxial deformation of amorphous poly(ethylene terephthalate) above glass transition temperature, Plastics, Rubber and Composites, vol.30, issue.2, pp.48-55, 2001.
DOI : 10.1016/0032-3861(96)85352-3
URL : https://hal.archives-ouvertes.fr/hal-00536250

M. H. Wagner and S. E. Stephenson, The Irreversibility Assumption of Network Disentanglement in Flowing Polymer Melts and its Effects on Elastic Recoil Predictions, Journal of Rheology, vol.23, issue.4, pp.489-504, 1979.
DOI : 10.1122/1.549529

M. H. Wagner, Elongational behaviour of polymer melts in constant elongation-rate, constant tensile stress, and constant tensile force experiments, Rheologica Acta, vol.18, issue.6, pp.681-692, 1979.
DOI : 10.1007/BF01533342

R. Tanner, From A to (BK)Z in Constitutive Relations, Journal of Rheology, vol.32, issue.7, pp.673-702, 1988.
DOI : 10.1122/1.549986

D. Focatiis, D. S. , J. Embery, and C. P. Buckley, Large deformations in oriented polymer glasses: Experimental study and a new glass-melt constitutive model, Journal of Polymer Science Part B: Polymer Physics, vol.41, issue.13, pp.48-1449, 2010.
DOI : 10.1002/polb.22028

M. H. Wagner and K. Geiger, The role of the orientation tensor in the rheology of flexible polymers, Macromolecular Theory and Simulations, vol.6, issue.4, pp.703-711, 1997.
DOI : 10.1002/mats.1997.040060402

M. Wagner, Modeling strain hardening of polydisperse polystyrene melts by molecular stress function theory, Rheologica Acta, vol.28, issue.3, pp.235-243, 2005.
DOI : 10.1007/s00397-004-0402-7

M. H. Wagner, J. Hepperle, and H. Munstedt, Relating rheology and molecular structure of model branched polystyrene melts by molecular stress function theory, Journal of Rheology, vol.48, issue.3, pp.48-489, 2004.
DOI : 10.1122/1.1687786

V. H. Rolon-garrido and M. H. Wagner, The MSF model: relation of nonlinear parameters to molecular structure of long-chain branched polymer melts, Rheologica Acta, vol.17, issue.12, pp.583-593, 2007.
DOI : 10.1007/s00397-006-0136-9

M. H. Wagner, S. Kheirandish, and O. Hassager, Quantitative prediction of transient and steady-state elongational viscosity of nearly monodisperse polystyrene melts, Journal of Rheology, vol.49, issue.6, pp.49-1317, 2005.
DOI : 10.1122/1.2048741

V. H. Rolon-garrido, Modeling non-Gaussian extensibility effects in elongation of nearly monodisperse polystyrene melts, Journal of Rheology, vol.50, issue.3, pp.327-340, 2006.
DOI : 10.1122/1.2184127

M. H. Wagner, A constitutive analysis of transient and steady-state elongational viscosities of bidisperse polystyrene blends, Journal of Rheology, vol.52, issue.1, pp.67-86, 2008.
DOI : 10.1122/1.2807442

N. Arroyo, M. A. Lopezmanchado, and F. Avalos, Crystallization kinetics of polypropylene: II. Effect of the addition of short glass fibres, Polymer, vol.38, issue.22, pp.38-5587, 1997.
DOI : 10.1016/S0032-3861(97)00102-X

B. Wunderlich, Macromolecular physics, 1973.

O. Ishizuka, K. Koyama, E. Viscosity, . At, . Constant et al., Elongational viscosity at a constant elongational strain rate of polypropylene melt, Polymer, vol.21, issue.2, pp.164-170, 1980.
DOI : 10.1016/0032-3861(80)90055-5

T. C. Huang, X-ray powder diffraction analysis of silver behenate, a possible low-angle diffraction standard, Journal of Applied Crystallography, vol.26, issue.2, pp.180-184, 1993.
DOI : 10.1107/S0021889892009762

M. L. Cerrada, Self-sterilized EVOH-TiO2 nanocomposites: Interface effects on biocidal properties, Advanced Functional Materials, issue.13, pp.18-1949, 2008.

T. Chen, Using in situ synchrotron radiation wide angle X-ray scattering (WAXS) to study CaCO3 scale formation at ambient and elevated temperature, Faraday Discussions, vol.176, issue.3, pp.355-365, 2007.
DOI : 10.1039/b616546j

F. Zuo, The role of interlamellar chain entanglement in deformation-induced structure changes during uniaxial stretching of isotactic polypropylene, Polymer, vol.48, issue.23, pp.6867-6880, 2007.
DOI : 10.1016/j.polymer.2007.08.065

P. H. Hermans, Contibution to the physics of cellulose, 1946.

L. E. Alexander, X-ray diffraction methods in polyer science, 1969.

R. Mendoza, Spatial distribution of molecular orientation in injection molded iPP: influence of processing conditions, Polymer, vol.44, issue.11, pp.3363-3373, 2003.
DOI : 10.1016/S0032-3861(03)00253-2
URL : https://hal.archives-ouvertes.fr/hal-00114027

P. W. Zhu, Orientation distribution of sheared isotactic polypropylene plates through thickness in the presence of sodium benzoate, Journal of Applied Physics, vol.97, issue.10, p.97, 2005.
DOI : 10.1063/1.1897072

R. J. Young, A dislocation model for yield in polyethylene, Philosophical Magazine, vol.8, issue.1, pp.85-94, 1974.
DOI : 10.1080/14786439808206535

R. J. Young, Screw dislocation model for yield in polyethylene, Materials forum, vol.11, p.210, 1988.

P. W. Zhu and G. Edward, Orientational distribution of parent???daughter structure of isotactic polypropylene: a study using simultaneous synchrotron WAXS and SAXS, Journal of Materials Science, vol.91, issue.19, pp.43-6459, 2008.
DOI : 10.1007/s10853-008-2979-1

R. Seguela, Dislocation approach to the plastic deformation of semicrystalline polymers: Kinetic aspects for polyethylene and polypropylene, Journal of Polymer Science Part B-Polymer Physics, issue.6, pp.40-593, 2002.

R. Seguela, Plastic deformation of polypropylene in relation to crystalline structure, Journal of Applied Polymer Science, vol.26, issue.61, pp.1873-1885, 1999.
DOI : 10.1002/(SICI)1097-4628(19990314)71:11<1873::AID-APP18>3.0.CO;2-I

C. Jourdan, J. Y. Cavaille, and J. Perez, Mechanical relaxations in polypropylene: A new experimental and theoretical approach, Journal of Polymer Science Part B: Polymer Physics, vol.27, issue.11, pp.27-2361, 1989.
DOI : 10.1002/polb.1989.090271115

T. Borg and E. Pääkkönen, Linear viscoelastic model for elongational viscosity by control theory, Rheologica Acta, vol.17, issue.4, pp.1-14
DOI : 10.1007/s00397-011-0598-2

M. H. Wagner, Modeling elongational viscosity of blends of linear and long-chain branched polypropylenes, Rheologica Acta, vol.20, issue.2, pp.211-221, 2006.
DOI : 10.1007/s00397-006-0108-0

M. H. Wagner, P. Rubio, and H. Bastian, The molecular stress function model for polydisperse polymer melts with dissipative convective constraint release, Journal of Rheology, vol.45, issue.6, pp.45-1387, 2001.
DOI : 10.1122/1.1413503

M. H. Wagner, The strain-hardening behaviour of linear and long-chain-branched polyolefin melts in extensional flows, Rheologica Acta, vol.39, issue.2, pp.97-109, 2000.
DOI : 10.1007/s003970050010

A. D. Gotsis, B. L. Zeevenhoven, and C. J. Tsenoglou, Effect of long branches on the rheology of polypropylene, Journal of Rheology, vol.48, issue.4, pp.895-914, 2004.
DOI : 10.1122/1.1764823

E. Leonardi, C. Derail, and G. Marin, Some applications of molecular rheology: Polymer formulation and molecular design, Journal of Non-Newtonian Fluid Mechanics, vol.128, issue.1, pp.50-61, 2005.
DOI : 10.1016/j.jnnfm.2005.03.012

V. H. Rolon-garrido, Modelling elongational and shear rheology of two LDPE melts, Rheologica Acta, vol.130, issue.3, pp.691-697, 2009.
DOI : 10.1007/s00397-009-0366-8

R. J. Steenbakkers and G. W. Peters, Suspension-based rheological modeling of crystallizing polymer melts, Rheologica Acta, vol.10, issue.24, pp.5-6, 2008.
DOI : 10.1007/s00397-008-0273-4

F. Detrez, S. Cantournet, and R. Seguela, Plasticity/damage coupling in semicrystalline polymers prior to yielding: Micromechanisms and damage law identification, Polymer, vol.52, issue.9, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00592106

P. Duffo, Rheology of polypropylene in the solid state, Journal of Materials Science, vol.15, issue.II, pp.701-711, 1995.
DOI : 10.1007/BF00356330

E. Gorlier, J. M. Haudin, and N. Billon, Strain-induced crystallisation in bulk amorphous PET under uni-axial loading, Polymer, vol.42, issue.23, pp.9541-9549, 2001.
DOI : 10.1016/S0032-3861(01)00497-9
URL : https://hal.archives-ouvertes.fr/hal-00536370

E. Bischoff-white, H. Henning, J. Winter, and . Rothstein, Extensional-flow-induced crystallization of isotactic polypropylene, octobre. En ligne, pp.1-12, 2011.
DOI : 10.1007/s00397-011-0595-5

C. Sawatari, M. Matsuo, T. Modulus, . Dynamic-mechanical-properties, . Of et al., Temperature dependence of crystal lattice modulus and dynamic mechanical properties of ultradrawn polypropylene films, Macromolecules, vol.22, issue.7, pp.2968-2973, 1989.
DOI : 10.1021/ma00197a016

L. R. Treloar, . Calculations, . Elastic, . Of, and . Crystals, Calculations of elastic moduli of polymer crystals: II. Terylene, Polymer, vol.1, issue.23, pp.279-289, 1960.
DOI : 10.1016/0032-3861(60)90039-2

C. O. Phillips, Finite element modelling of low temperature forming of polymer films with application in in-mould decoration, Materials & Design, vol.30, issue.3, pp.537-550, 2009.
DOI : 10.1016/j.matdes.2008.05.056

G. Sell, C. , J. M. Hiver, and A. Dahoun, Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of Solids and Structures, pp.39-52, 2002.

H. X. Li and C. P. Buckley, Evolution of strain localization in glassy polymers: A numerical study, International Journal of Solids and Structures, vol.46, issue.7-8, pp.7-8, 2009.
DOI : 10.1016/j.ijsolstr.2008.12.002

L. E. Govaert, P. H. Timmermans, and W. A. Brekelmans, The Influence of Intrinsic Strain Softening on Strain Localization in Polycarbonate: Modeling and Experimental Validation, Journal of Engineering Materials and Technology, vol.122, issue.2, pp.122-177, 2000.
DOI : 10.1115/1.482784