P. Bradshaw, The analogy between streamline curvature and buoyancy in turbulent shear flow, Journal of Fluid Mechanics, vol.3, issue.01, pp.1-177, 1969.
DOI : 10.1007/BF02095927

O. Cabrit and F. Nicoud, Direct simulations for wall modeling of multicomponent reacting compressible turbulent flows, Physics of Fluids, vol.21, issue.5, pp.55108-55153, 2009.
DOI : 10.1063/1.3123528
URL : https://hal.archives-ouvertes.fr/hal-00803823

M. Cakan, Aero-thermal Investigation of Fixed Rib-roughened Internal Cooling Passages, pp.41-70, 2000.

L. Cambier and J. Veuillot, Status of the elsA Software for Flow Simulation and Multi-Disciplinary Applications, 46th AIAA Aerospace Sciences Meeting and Exhibit, 2008.
DOI : 10.2514/6.2008-664

C. Cambon, J. Benoit, L. Shao, and L. Jacquin, Stability analysis and large-eddy simulation of rotating turbulence with organized eddies, Journal of Fluid Mechanics, vol.93, issue.-1, pp.175-200, 1994.
DOI : 10.1063/1.1694822

L. Casarsa, Aerodynamic performance investigation of a fixed rib-roughened internal cooling Passage, 2003.

S. Chang, T. Liou, L. , and T. , Thermal performance of developing flow in a radially rotating parallelogram channel with 45?? ribs, International Journal of Thermal Sciences, vol.52, issue.0, pp.186-204, 2012.
DOI : 10.1016/j.ijthermalsci.2011.09.013

P. Chassaing, Turbulence en mécanique des fluides, analyse du phénomène en vue de sa modélisation à l'usage de l'ingénieur. Cépaduès-éditions, p.29, 2000.

A. Chatelain, Simulation des Grandes Echelles d'Ecoulements Turbulents avec Transferts de Chaleur, 2004.
URL : https://hal.archives-ouvertes.fr/tel-00006845

F. Coletti, I. Cresci, and T. Arts, Time-Resolved PIV Measurements of Turbulent Flow in Rotating Rib-Roughened Channel With Coriolis and Buoyancy Forces, Volume 4: Heat Transfer, Parts A and B, pp.2012-69406
DOI : 10.1115/GT2012-69406

F. Coletti, T. Maurer, T. Arts, D. Sante, and A. , Flow field investigation in rotating rib-roughened channel by means of particle image velocimetry, Experiments in Fluids, vol.387, issue.4, pp.1043-1061, 2011.
DOI : 10.1007/s00348-011-1191-2

F. Coletti, T. Verstraete, T. Vanderwielen, J. Bulle, and T. Arts, Optimization of a u-bend for minimal pressure loss in internal cooling channels: Part II ? Experimental validation, ASME Conference Proceedings, vol.54655, issue.112, pp.1689-1699, 2011.

O. Colin and M. Rudgyard, Development of High-Order Taylor???Galerkin Schemes for LES, Journal of Computational Physics, vol.162, issue.2, pp.338-371, 2000.
DOI : 10.1006/jcph.2000.6538

E. Collado, Analyse de l'impact de l'environnement aérothermique sur la température des pales de turbine HP, 2012.

P. Comte, New tools in turbulence modelling. vortices in incompressible les and non-trivial geometries. Course of Ecole de Physique des Houches, 1996.

D. Corson, R. Jaiman, and F. Shakib, Industrial application of RANS modelling: capabilities and needs, International Journal of Computational Fluid Dynamics, vol.23, issue.4, pp.337-347, 2009.
DOI : 10.1006/jfls.1993.1014

J. Cui, V. C. Patel, L. , and C. , Large-eddy simulation of turbulent flow in a channel with rib roughness, International Journal of Heat and Fluid Flow, vol.24, issue.3, pp.372-388, 2003.
DOI : 10.1016/S0142-727X(03)00002-X

B. Cushman-roisin, Introduction to Geophysical Fluid Dynamics, 1 ed, 1994.

Y. F. Dafalias, Y. , and B. A. , Objective Model for the Fluctuating Pressure-Strain-Rate Correlations, Journal of Engineering Mechanics, vol.135, issue.9, pp.1006-1014, 2009.
DOI : 10.1061/(ASCE)EM.1943-7889.0000014
URL : http://dspace.lib.ntua.gr/handle/123456789/19803

B. De-laage-de-meux, Modélisation des écoulements turbulents en rotation et en présence de transferts thermiques par approche hybride RANS/LES zonale École nationale supérieure de mécanique et d'aérotechnique, pp.77-79, 2012.

D. Sante, A. Theunissen, R. Van-den-braembussche, and R. A. , A new facility for time-resolved PIV measurements in rotating channels, Experiments in Fluids, vol.387, issue.6, pp.179-188, 2007.
DOI : 10.1007/s00348-007-0389-9

F. Duchaine, A. Corpron, L. Pons, V. Moureau, F. Nicoud et al., Development and assessment of a coupled strategy for conjugate heat transfer with Large Eddy Simulation: Application to a cooled turbine blade, International Journal of Heat and Fluid Flow, vol.30, issue.6, pp.1129-1141, 2009.
DOI : 10.1016/j.ijheatfluidflow.2009.07.004
URL : https://hal.archives-ouvertes.fr/hal-00803384

F. Ducros, P. Comte, and M. Lesieur, Large-eddy simulation of transition to turbulence in a boundary layer developing spatially over a flat plate

P. A. Durbin, Near-wall turbulence closure modeling without damping functions, Theoretical and Computational Fluid Dynamics, vol.3, pp.1-13, 1991.

Y. Edo, S. Obi, and S. Masuda, Heat transfer experiments in rotating boundary layer flow, International Journal of Heat and Fluid Flow, vol.21, issue.6, pp.684-692, 2000.
DOI : 10.1016/S0142-727X(00)00061-8

V. Ekman, On the influence of the earth's rotation on ocean currents, Ark. Mat. Astron. Fys, vol.2, pp.1-53, 1905.

M. A. Elyyan and D. K. Tafti, Investigation of Coriolis Forces Effect of Flow Structure and Heat Transfer Distribution in a Rotating Dimpled Channel, Journal of Turbomachinery, vol.134, issue.3, p.31007, 2012.
DOI : 10.1115/1.4003027

A. Favre, Statistical equations of turbulent gases In Problems of hydrodynamics and continuum mechanics. SIAM, Philadelphia, pp.231-266, 1969.

R. D. Flack, Fundamentals of Jet Propulsion with Applications, 2005.
DOI : 10.1017/CBO9780511807138

J. Fröhlich, V. Terzi, D. Hybrid, and L. , RANS methods for the simulation of turbulent flows, Progress in Aerospace Sciences, pp.349-377, 2008.

M. Gad-el-hak, Questions in Fluid Mechanics: Stokes??? Hypothesis for a Newtonian, Isotropic Fluid, Journal of Fluids Engineering, vol.117, issue.1, pp.3-5, 1995.
DOI : 10.1115/1.2816816

E. Garnier, N. Adams, and P. Sagaut, Large Eddy Simulation for Compressible Flows, 1 ed, 2009.

T. B. Gatski and C. G. Speziale, On explicit algebraic stress models for complex turbulent flows, Journal of Fluid Mechanics, vol.227, issue.-1, pp.59-78, 1993.
DOI : 10.1063/1.864780

G. Website, http://www.geaviation.com/press/ge90/ge90_200325a, 2003.

J. Ghighi, Modelisatiom du fluage de superalliages monocristalllins : effets d'anisotropie et de microstructure, 2013.

A. Gill, Atmosphere-Ocean Dynamics, 1 ed, 1982.

R. J. Goldstein, Film Cooling, Advances in Heat Transfer, pp.321-379, 1971.
DOI : 10.1016/S0065-2717(08)70020-0

V. Granet, La Simulation aux Grandes Echelles : un outil pour la prédiction des variabilités cycliques dans les moteurs á allumage commandé ?, 2011.

O. Grundestam, S. Wallin, and A. Johansson, Direct numerical simulations of rotating turbulent channel flow, Journal of Fluid Mechanics, vol.598, pp.177-199, 2008.
DOI : 10.1017/S0022112000002408

J. Han, Recent studies in turbine blade cooling, International Journal of Rotating Machinery, vol.10, issue.6, pp.443-457, 2004.

J. Han, S. Dutta, S. Ekkad, and S. E. Dutta, Gas Turbine Heat Transfer and Cooling Technology, pp.12-13, 2001.

C. R. Hedlund and P. M. Ligrani, Local Swirl Chamber Heat Transfer and Flow Structure at Different Reynolds Numbers, Journal of Turbomachinery, vol.122, issue.2, pp.375-385, 1999.
DOI : 10.1115/1.555458

C. W. Hirt, A. Amsden, and J. L. Cook, An arbitrary lagrangianeulerian computing method for all flow speeds, J. Comput. Phys, vol.131, issue.4, pp.371-385, 1974.

J. C. Hunt, A. A. Wray, and P. Moin, Eddies, streams, and convergence zones in turbulent flows, Proc. of the Summer Program Center for Turbulence Research, pp.193-208, 1988.

H. Iacovides, R. , and M. , Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, International Journal of Heat and Fluid Flow, vol.20, issue.3, pp.320-328, 1999.
DOI : 10.1016/S0142-727X(99)00018-1

F. P. Incropera, Fundamentals of Heat and Mass Transfer, 6th revised edition ed, p.25, 2007.

P. Ireland and G. Dailey, Aerothermal performance of internal cooling systems in turbomachines, -05 of VKI Lecture Series. (Cited on, pp.11-12, 2010.

D. Jackson and B. Launder, Osborne Reynolds and the Publication of His Papers on Turbulent Flow, Annual Review of Fluid Mechanics, vol.39, issue.1, pp.19-35, 2007.
DOI : 10.1146/annurev.fluid.39.050905.110241

Y. Jang, H. Chen, and J. Han, Flow and Heat Transfer in a Rotating Square Channel With 45 deg Angled Ribs by Reynolds Stress Turbulence Model, Journal of Turbomachinery, vol.123, issue.1, pp.124-132, 2001.
DOI : 10.1115/1.1333092

S. Jauré, Conjugate heat transfer in gas turbine combustion chamber. Identification of coupling strategies for massively parallel computations, p.20, 2012.

J. P. Johnston, Effects of System Rotation on Turbulence Structure: A Review Relevant to Turbomachinery Flows, International Journal of Rotating Machinery, vol.4, issue.2, pp.97-112, 1998.
DOI : 10.1155/S1023621X98000098

J. P. Johnston, R. M. Halleent, and D. K. Lezius, Effects of spanwise rotation on the structure of two-dimensional fully developed turbulent channel flow, Journal of Fluid Mechanics, vol.45, issue.03, pp.3-533, 1972.
DOI : 10.1063/1.1693328

M. Kane, Y. , and S. , CALCULATION OF GAS TURBINE BLADE TEMPERATURES USING AN ITERATIVE CONJUGATE HEAT TRANSFER APPROACH, Proceedings of International Symposium on Heat Transfer in Gas Turbine Systems, pp.1-14, 2009.
DOI : 10.1615/ICHMT.2009.HeatTransfGasTurbSyst.120

K. Kays, Turbulent Prandtl number Where are we ? J. Heat Trans, pp.116-284, 1994.
DOI : 10.1115/1.2911398

D. M. Kercher, Turbine blade having transpiration strip cooling and method of manufacture, p.5690473, 1997.

A. N. Kolmogorov, The Local Structure of Turbulence in Incompressible Viscous Fluid for Very Large Reynolds Numbers, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.434, issue.1890, p.301, 1941.
DOI : 10.1098/rspa.1991.0075

P. Komi, Strength and Power in Sport: Olympic Encyclopedia of Sports Medicine, 2002.

R. Kraichnan, Diffusion by a Random Velocity Field, Physics of Fluids, vol.13, issue.1, pp.22-31, 1970.
DOI : 10.1063/1.1692799

R. Kristoffersen and H. Andersson, Direct simulations of low-Reynolds-number turbulent flow in a rotating channel, Journal of Fluid Mechanics, vol.202, issue.-1, pp.163-197, 1993.
DOI : 10.1007/BF00946177

O. Labbé, J. Ryan, and P. Sagaut, Direct Numerical Simulation of Flow in a Ribbed Channel, International Journal of Computational Fluid Dynamics, vol.11, issue.3, pp.275-284, 1999.
DOI : 10.1080/10618569908940880

N. Lamarque, Schémas numériques et conditions limites pour la simulation aux grandes échelles de la combustion diphasique dans les foyers d'hélicoptère, 2007.

E. Lamballais, M. Lesieur, and O. Métais, Effects of spanwise rotation on the vorticity stretching in transitional and turbulent channel flow, International Journal of Heat and Fluid Flow, vol.17, issue.3, pp.324-332, 1996.
DOI : 10.1016/0142-727X(96)00043-4

B. E. Launder and W. P. Jones, The prediction of laminarisation with a two-equations model of turbulence, Int. J. Heat and Mass Transfer, vol.15, pp.301-314, 1972.

B. E. Launder, G. J. Reece, R. , and W. , Progress in the development of a Reynolds-stress turbulence closure, Journal of Fluid Mechanics, vol.61, issue.03, pp.537-566, 1975.
DOI : 10.1063/1.1694422

S. A. Lawson, A. A. Thrift, K. A. Thole, and A. Kohli, Heat transfer from multiple row arrays of low aspect ratio pin fins, International Journal of Heat and Mass Transfer, vol.54, issue.17-18, pp.17-18, 2011.
DOI : 10.1016/j.ijheatmasstransfer.2011.04.001

P. D. Lax and B. Wendroff, Difference schemes for hyperbolic equations with high order of accuracy, Communications on Pure and Applied Mathematics, vol.12, issue.3, pp.381-398, 1964.
DOI : 10.1002/cpa.3160170311

C. Leblanc, S. V. Ekkad, T. Lambert, and V. And-rajendran, Detailed heat transfer distributions in engine similar cooling channels for a turbine rotor blade with different rib orientations, Turbo Expo: Turbine Technical Conference and Exposition 5, pp.1109-1116, 2011.

F. S. Lien, A. , and D. P. , Non-linear k ? ? ? v 2 modeling with application to high lift, Center for Turbulence Research, Proceedings of the Summer, 1996.

P. Ligrani, Internal cooling -surface heat transfer augmentation. http: //www.ligrani.com/Research/Groups/internalcooling.html

J. Luo, R. , and E. H. , Conjugate Heat Transfer Analysis of a Cooled Turbine Vane Using the V2F Turbulence Model, Journal of Turbomachinery, vol.129, issue.4, pp.773-781, 2006.
DOI : 10.1115/1.2720483

K. Mahesh, G. Constantinescu, S. Apte, G. Iaccarino, and P. Moin, Large-eddy simulation of gas turbine combustors, Annual Research Briefs . Center for Turbulence Research, pp.3-17, 2001.

W. Mcadams, Heat Transmission, 1942.

S. Mendez and F. Nicoud, Large-eddy simulation of a bi-periodic turbulent flow with effusion, Journal of Fluid Mechanics, vol.117, pp.27-65, 2008.
DOI : 10.1017/S0022112006004034
URL : https://hal.archives-ouvertes.fr/hal-00820464

P. Moin, K. D. Squires, W. Cabot, L. , and S. , A dynamic subgrid???scale model for compressible turbulence and scalar transport, Physics of Fluids A: Fluid Dynamics, vol.3, issue.11, pp.2746-2757, 1991.
DOI : 10.1063/1.858164

V. Moureau, P. Domingo, and L. Vervisch, Design of a massively parallel CFD code for complex geometries, Comptes Rendus M??canique, vol.339, issue.2-3, pp.2-3, 2011.
DOI : 10.1016/j.crme.2010.12.001

V. Moureau, G. Lartigue, Y. Sommerer, C. Angelberger, O. Colin et al., Numerical methods for unsteady compressible multi-component reacting flows on fixed and moving grids, Journal of Computational Physics, vol.202, issue.2, pp.710-736, 2005.
DOI : 10.1016/j.jcp.2004.08.003

H. Moustapha, M. F. Zelesky, N. C. Baines, J. , and D. , Axial and Radial Turbines, Concepts ETI, Inc, 2003.

A. Murata and S. Mochizuki, Large eddy simulation with a dynamic subgrid-scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulators, International Journal of Heat and Mass Transfer, vol.43, issue.7, pp.1243-1259, 2000.
DOI : 10.1016/S0017-9310(99)00205-7

Y. Nagano, H. Hattori, and T. Houra, DNS of velocity and thermal fields in turbulent channel flow with transverse-rib roughness, International Journal of Heat and Fluid Flow, vol.25, issue.3, pp.393-403, 2004.
DOI : 10.1016/j.ijheatfluidflow.2004.02.011

F. Nicoud, D. , and F. , Subgrid-scale stress modelling based on the square of the velocity gradient, Flow, Turbulence and Combustion, vol.62, issue.3, pp.183-200, 1999.
DOI : 10.1023/A:1009995426001
URL : https://hal.archives-ouvertes.fr/hal-00910373

A. Ooi, G. Iaccarino, P. Durbin, and M. Behnia, Reynolds averaged simulation of flow and heat transfer in ribbed ducts, International Journal of Heat and Fluid Flow, vol.23, issue.6, pp.750-757, 2002.
DOI : 10.1016/S0142-727X(02)00188-1

J. Park, J. Han, Y. Huang, S. Ou, and R. Boyle, Heat transfer performance comparisons of five different rectangular channels with parallel angled ribs, International Journal of Heat and Mass Transfer, vol.35, issue.11, pp.2891-2903, 1992.
DOI : 10.1016/0017-9310(92)90309-G

J. A. Parsons, J. Han, and Y. Zhang, Effect of model orientation and wall heating condition on local heat transfer in a rotating two-pass square channel with rib turbulators, International Journal of Heat and Mass Transfer, vol.38, issue.7, pp.1151-1159, 1995.
DOI : 10.1016/0017-9310(94)00246-R

R. Phibel, E. Laroche, L. Casarsa, and T. Arts, Numerical investigation on flow and heat transfer in a rib-roughened channel with high blockage ratio, 6th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, pp.17-70, 2005.

U. Piomelli, Wall-layer models for large-eddy simulations, Progress in Aerospace Sciences, vol.44, issue.6, pp.437-446, 2008.
DOI : 10.1016/j.paerosci.2008.06.001

T. Poinsot and S. Lele, Boundary conditions for direct simulations of compressible viscous flows, Journal of Computational Physics, vol.101, issue.1, pp.104-129, 1992.
DOI : 10.1016/0021-9991(92)90046-2

S. B. Pope, Turbulent flows, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00338511

Z. Qin and R. H. Pletcher, Large eddy simulation of turbulent heat transfer in a rotating square duct, International Journal of Heat and Fluid Flow, vol.27, issue.3, pp.371-390, 2006.
DOI : 10.1016/j.ijheatfluidflow.2006.01.003

R. Kumar, B. V. , P. , and B. V. , A combined CFD and network approach for a simulated turbine blade cooling system, Indian Journal of Engineering & Materials Sciences, vol.13, pp.195-201, 2006.

O. Reynolds, On the Dynamical Theory of Incompressible Viscous Fluids and the Determination of the Criterion, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.186, issue.0, pp.123-164, 1895.
DOI : 10.1098/rsta.1895.0004

J. Richard, Développement d'une chaine de calcul pour les interactions fluide-structure et application aux instabilités aéro-acoustiques d'un moteur á propergol solide, p.2012

J. P. Richter, The Notebooks of Leonardo da Vinci, 1970.

M. Ricklick and J. S. Kapat, Determination of a Local Bulk Temperature Based Heat Transfer Coefficient for the Wetted Surfaces in a Single Inline Row Impingement Channel, Journal of Turbomachinery, vol.133, issue.3, p.31008, 2011.
DOI : 10.1115/1.4001227

P. H. Rothe and J. P. Johnston, Free Shear Layer Behavior in Rotating Systems, Journal of Fluids Engineering, vol.101, issue.1, pp.117-120, 1979.
DOI : 10.1115/1.3448721

P. Sagaut, Large eddy simulation for incompressible flows, 2002.

A. K. Saha and S. Acharya, Unsteady RANS simulation of turbulent flow and heat transfer in ribbed coolant passages of different aspect ratios, International Journal of Heat and Mass Transfer, vol.48, issue.21, pp.23-24, 2005.

F. Schmitt, About Boussinesq's turbulent viscosity hypothesis: historical remarks and a direct evaluation of its validity, Comptes Rendus M??canique, vol.335, issue.9-10, pp.9-10, 2007.
DOI : 10.1016/j.crme.2007.08.004

T. Schønfeld and T. Poinsot, Influence of boundary conditions in LES of premixed combustion instabilities, Annual Research Briefs . Center for Turbulence Research, pp.73-84, 1999.

T. K. Sengupta, G. Ganerwal, and A. Dipankar, High Accuracy Compact Schemes and Gibbs' Phenomenon, Journal of Scientific Computing, vol.71, issue.2, pp.253-268, 2004.
DOI : 10.1007/s10915-004-1317-2

E. A. Sewall, Large Eddy Simulations of Flow and Heat Transfer in the Developing and 180 ? Bend Regions of Ribbed Gas Turbine Blade Internal Cooling Ducts with Rotation ? Effect of Coriolis and Centrifugal Buoyancy Forces, 2005.

E. A. Sewall and D. K. Tafti, Large Eddy Simulation of Flow and Heat Transfer in the Developing Flow Region of a Rotating Gas Turbine Blade Internal Cooling Duct With Coriolis and Buoyancy Forces, Journal of Turbomachinery, vol.130, issue.1, pp.11005-11021, 2008.
DOI : 10.1115/1.2437779

A. Sleiti and J. Kapat, Effect of Coriolis and centrifugal forces on turbulence and transport at high rotation and density ratios in a rib-roughened channel, International Journal of Thermal Sciences, vol.47, issue.5, pp.609-619, 2008.
DOI : 10.1016/j.ijthermalsci.2007.06.008

J. Smagorinsky, GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS, Monthly Weather Review, vol.91, issue.3, pp.99-164, 1963.
DOI : 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2

A. Smirnov, S. Shi, C. , and I. , Random Flow Generation Technique for Large Eddy Simulations and Particle-Dynamics Modeling, Journal of Fluids Engineering, vol.123, issue.2
DOI : 10.1115/1.1369598

M. W. Smith and A. J. Smits, Visualization of the structure of supersonic turbulent boundary layers, Experiments in Fluids, vol.18, issue.4, pp.288-302, 1995.
DOI : 10.1007/BF00195099

P. Spalart, A. , and S. , A one-equation turbulence model for aerodynamic flows AIAA Paper, 1992.

C. G. Speziale, Galilean invariance of subgrid-scale stress models in the large-eddy simulation of turbulence, Journal of Fluid Mechanics, vol.18, issue.-1, pp.55-62, 1985.
DOI : 10.1017/S0022112081001237__S0022112081001237

G. Staffelbach, L. Gicquel, G. Boudier, and T. Poinsot, Large Eddy Simulation of self excited azimuthal modes in annular combustors, Proceedings of the Combustion Institute, vol.32, issue.2
DOI : 10.1016/j.proci.2008.05.033

M. Stephens, T. Shih, C. , and K. , Computation of flow and heat transfer in a rectangular channel with ribs. AIAA-1995-0180, 1995.

G. Stokes, On the theories of internal friction of fluids in motion, Transactions of the Cambridge Philosophical Society, vol.8, pp.287-305, 1845.

D. Tafti, Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades, International Journal of Heat and Fluid Flow, vol.26, issue.1, pp.92-104, 2005.
DOI : 10.1016/j.ijheatfluidflow.2004.07.002

D. K. Tafti and S. P. Vanka, A numerical study of the effects of spanwise rotation on turbulent channel flow, Physics of Fluids A: Fluid Dynamics, vol.3, issue.4, pp.642-656, 1991.
DOI : 10.1063/1.858215

T. Teitelbaum and P. Mininni, The decay of turbulence in rotating flows, Physics of Fluids, vol.23, issue.6, pp.65105-065105, 2011.
DOI : 10.1063/1.3592325

A. Thom, The Flow Past Circular Cylinders at Low Speeds, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.141, issue.845, pp.651-669, 1933.
DOI : 10.1098/rspa.1933.0146

D. J. Tritton, Stabilization and destabilization of turbulent shear flow in a rotating fluid, Journal of Fluid Mechanics, vol.25, issue.-1, pp.503-523, 1992.
DOI : 10.1017/S0022112080000092

P. G. Tucker and S. Lardeau, Applied large eddy simulation, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.367, issue.1, pp.1899-2809, 2009.
DOI : 10.1146/annurev.fluid.34.082901.144919

T. Verstraete, F. Coletti, J. Bulle, T. Vanderwielen, and T. Arts, Optimization of a u-bend for minimal pressure loss in internal cooling channels: Part I?Numerical method, ASME Conference Proceedings, vol.54655, issue.49, pp.1665-1676, 2011.

R. J. Volino, M. P. Schultz, and K. A. Flack, Turbulence structure in rough- and smooth-wall boundary layers, Journal of Fluid Mechanics, vol.3, pp.263-293, 2007.
DOI : 10.1017/S002211209900467X

R. Webb and E. Eckert, Application of rough surfaces to heat exchanger design, International Journal of Heat and Mass Transfer, vol.15, issue.9, pp.1647-1658, 1972.
DOI : 10.1016/0017-9310(72)90095-6

B. Weigand and S. Spring, Multiple Jet Impingement - A Review, Heat Transfer Research, vol.42, issue.2, pp.101-142, 2011.
DOI : 10.1615/HeatTransRes.v42.i2.30

F. Wlassow, Analyse instationnaire aérothermique d'un étage de turbine avec transport de points chauds, p.2012

H. Wu and N. Kasagi, Effects of arbitrary directional system rotation on turbulent channel flow, Physics of Fluids, vol.16, issue.4, pp.979-990, 2004.
DOI : 10.1063/1.1649337

C. Yang, L. , and T. , Heat transfer characteristics of water flow in microtubes, Experimental Thermal and Fluid Science, vol.32, issue.2, pp.432-439, 2007.
DOI : 10.1016/j.expthermflusci.2007.05.006

J. Zhou, R. J. Adrian, S. Balachandar, K. , and T. M. , Mechanisms for generating coherent packets of hairpin vortices in channel flow, Journal of Fluid Mechanics, vol.387
DOI : 10.1017/S002211209900467X

N. Gourdain, L. Gicquel, R. Fransen, E. Collado, and T. Arts, The works presented in this thesis have led to several publications in different proceedings of the ASME Turbo Expo conferences. The corresponding references are listed below while [b] and [c] are reproduced in the following pages Application of RANS and LES to the prediction of flows in high pressure turbines components, ASME Turbo Expo, pp.2011-46518, 2011.

R. Fransen, N. Gourdain, and L. Gicquel, Steady and Unsteady Modeling for Heat Transfer Predictions of High Pressure Turbine Blade Internal Cooling, Volume 4: Heat Transfer, Parts A and B, pp.2012-69482
DOI : 10.1115/GT2012-69482

R. Fransen, L. Gicquel, A. Ooi, G. Iaccarino, P. Durbin et al., Large eddy simulation of rotating ribbed channel Reynolds averaged simulation of flow and heat transfer in ribbed ducts, ASME Turbo Expo 2013, pp.2013-95076, 2002.

E. A. Sewall, D. K. Tafti, A. B. Graham, and K. A. Thole, Experimental validation of large eddy simulations of flow and heat transfer in a stationary ribbed duct, International Journal of Heat and Fluid Flow, vol.27, issue.2, pp.243-258, 2006.
DOI : 10.1016/j.ijheatfluidflow.2005.08.010

D. Tafti, Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades, Feb, pp.92-104, 2005.
DOI : 10.1016/j.ijheatfluidflow.2004.07.002

J. Ahn, L. , and J. S. , Large eddy simulation of flow and heat transfer in a channel with a detached rib array, International Journal of Heat and Mass Transfer, vol.53, issue.1-3, pp.53-445, 2010.
DOI : 10.1016/j.ijheatmasstransfer.2009.09.012

P. Sagaut, Large Eddy Simulation for Incompressible Flows: An Introduction. Scientific Computation Series, Applied Mechanics Reviews, vol.55, issue.6, 2000.
DOI : 10.1115/1.1508154

S. B. Pope, Turbulent flows, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00338511

L. Cambier and J. Veuillot, Status of the elsA Software for Flow Simulation and Multi-Disciplinary Applications, 46th AIAA Aerospace Sciences Meeting and Exhibit, 2008.
DOI : 10.2514/6.2008-664

T. Schønfeld and T. Poinsot, Influence of boundary conditions in LES of premixed combustion instabilities, Annual Research Briefs . Center for Turbulence Research, pp.73-84, 1999.

B. E. Launder and W. P. Jones, The prediction of laminarisation with a two-equations model of turbulence, 1972.

B. E. Launder, G. J. Reece, R. , and W. , Progress 9 Copyright c 2012 by ASME in the development of a reynolds stress turbulence closure, 1975.

P. Spalart, A. , and S. , A one-equation turbulence model for aerodynamic flows, 30th Aerospace Sciences Meeting and Exhibit, 1992.
DOI : 10.2514/6.1992-439

P. A. Durbin, Near-wall turbulence closure modeling without damping functions, Theoretical and Computational Fluid Dynamics, pp.1-13, 1991.

M. W. Smith and A. J. Smits, Visualization of the structure of supersonic turbulent boundary layers, Experiments in Fluids, vol.18, issue.4, pp.288-302, 1995.
DOI : 10.1007/BF00195099

J. Smagorinsky, GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS, Monthly Weather Review, vol.91, issue.3, 1963.
DOI : 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2

F. Ducros, P. Comte, and M. Lesieur, Large-eddy simulation of transition to turbulence in a boundary layer developing spatially over a flat plate, J. Fluid Mech, vol.326, pp.1-36, 1996.

P. Comte, New tools in turbulence modelling. vortices in incompressible les and non-trivial geometries. Course of Ecole de Physique des Houches, 1996.

M. Liou, A Sequel to AUSM: AUSM+, Journal of Computational Physics, vol.129, issue.2, pp.364-382, 1996.
DOI : 10.1006/jcph.1996.0256

S. Yoon, J. , and A. , An lu-ssor scheme for the euler and navierstokes equations, 1987.

O. Colin and M. Rudgyard, Development of highorder taylor-galerkin schemes for unsteady calculations, 2000.

J. Donea, A Taylor-Galerkin method for convective transport problems, International Journal for Numerical Methods in Engineering, vol.1, issue.1, pp.101-119, 1984.
DOI : 10.1002/nme.1620200108

N. Lamarque, Schémas numériques et conditions limites pour la simulation aux grandeséchellesgrandes´grandeséchelles de la combustion diphasique dans les foyers d'hélicoptère, 2007.

L. Casarsa, Aerodynamic performance investigation of a fixed rib-roughened internal cooling passage, 2003.

M. Cakan and W. H. Mcadams, Aero-thermal investigation of fixed ribroughened internal cooling passages Von Karman Institute for Fluid Dynamics, 1942.

O. Cabrit and F. Nicoud, Direct simulations for wall modeling of multicomponent reacting compressible turbulent flows, Physics of Fluids, vol.21, issue.5, p.55108, 2009.
DOI : 10.1063/1.3123528
URL : https://hal.archives-ouvertes.fr/hal-00803823

M. Stephens, T. Shih, C. , and K. , Computation of flow and heat transfer in a rectangular channel with ribs, 33rd Aerospace Sciences Meeting and Exhibit, 1995.
DOI : 10.2514/6.1995-180

R. Phibel, E. Laroche, L. Casarsa, and T. Arts, Numerical investigation on flow and heat transfer in a ribroughened channel with high blockage ratio, 6th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, 2005.

F. S. Lien, A. , and D. P. , Non-linear k ? ? ? v 2 modeling with application to high lift, Center for Turbulence Research, Proceedings of the Summer 1996. Proceedings of ASME Turbo Expo 2013, pp.2013-95076, 1996.

L. Eddy, . Of, *. Ribbed-channel-r-´-emy-fransen, L. Vial, S. Turbomeca et al., MD 64511 Bordes Cedex1 France Email: remy.fransen@cerfacs.fr REFERENCES Numerical investigation on flow and heat transfer in a ribroughened channel with high blockage ratio, 6th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, 2005.

A. K. Sleiti and J. S. Kapat, Comparison Between EVM and RSM Turbulence Models in Predicting Flow and Heat Transfer in Rib-Roughened Channels, Volume 2, Parts A and B, p.29, 2006.
DOI : 10.1115/HT-FED2004-56250

S. Vortices, . In-space-time, . Visualized, . Means, . Iso-contours et al., Steady and unsteady modeling for heat transfer predictions of high pressure turbine blade internal cooling, ASME Turbo Expo 2012, pp.2012-69482, 2012.

D. Tafti, Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades, Feb, pp.92-104, 2005.
DOI : 10.1016/j.ijheatfluidflow.2004.07.002

P. Bradshaw, The analogy between streamline curvature and buoyancy in turbulent shear flow, Journal of Fluid Mechanics, vol.3, issue.01, pp.177-191, 1969.
DOI : 10.1007/BF02095927

S. W. Chang, T. Liou, and Y. Po, Coriolis and rotating buoyancy effect on detailed heat transfer distributions in a two-pass square channel roughened by 45?? ribs at high rotation numbers, Mar, pp.1349-1363, 2010.
DOI : 10.1016/j.ijheatmasstransfer.2009.12.024

P. Sagaut, Large Eddy Simulation for Incompressible Flows: An Introduction. Scientific Computation Series, Applied Mechanics Reviews, vol.55, issue.6, 2000.
DOI : 10.1115/1.1508154

S. B. Pope, Turbulent flows, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00338511

J. Smagorinsky, GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS, Monthly Weather Review, vol.91, issue.3, 1963.
DOI : 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2

F. Ducros, P. Comte, and M. Lesieur, Large-eddy simulation of transition to turbulence in a boundary layer developing spatially over a flat plate, J. Fluid Mech, vol.326, pp.1-36, 1996.

P. Comte, New tools in turbulence modelling. vortices in incompressible les and non-trivial geometries. Course of Ecole de Physique des Houches, 1996.

C. G. Speziale, Galilean invariance of subgrid-scale stress models in the large-eddy simulation of turbulence, Journal of Fluid Mechanics, vol.18, issue.-1, 1985.
DOI : 10.1017/S0022112081001237__S0022112081001237

H. Kobayashi, The subgrid-scale models based on coherent structures for rotating homogeneous turbulence and turbulent channel flow, Mar, pp.45104-045104, 2005.
DOI : 10.1063/1.1874212

M. Tsubokura, T. Kobayashi, N. Taniguchi, and T. Kogaki, Subgrid scale modeling for the turbulence in rotating reference frames, Journal of Wind Engineering and Industrial Aerodynamics, vol.81, issue.1-3, pp.81-361, 1999.
DOI : 10.1016/S0167-6105(99)00030-6

T. Schønfeld and T. Poinsot, Influence of boundary conditions in LES of premixed combustion instabilities, Annual Research Briefs . Center for Turbulence Research, pp.73-84, 1999.

O. Colin and M. Rudgyard, Development of highorder taylor-galerkin schemes for unsteady calculations, 2000.

J. Donea, A Taylor-Galerkin method for convective transport problems, International Journal for Numerical Methods in Engineering, vol.1, issue.1, pp.101-119, 1984.
DOI : 10.1002/nme.1620200108

N. Lamarque, Schémas numériques et conditions limites pour la simulation aux grandeséchellesgrandes´grandeséchelles de la combustion diphasique dans les foyers d'hélicoptère, 2007.

C. W. Hirt, A. Amsden, and J. L. Cook, An arbitrary lagrangian-eulerian computing method for all flow 9 Copyright c 2013 by ASME speeds, J. Comput. Phys, vol.131, issue.4, pp.371-385, 1974.

V. Granet, La simulation aux grandes echelles : un outil pour la prédiction des variabilités cycliques dans les moteursámoteurs´moteursá allumage commandé, 2011.

J. Richard, Développement d'une chaine de calcul pour les interactions fluide-structure et application aux instabilités aéro-acoustiques d'un moteurámoteur´moteurá propergol solide, 2012.

F. Coletti, I. Cresci, and T. Arts, Timeresolved piv measurements of turbulent flow in rotating ribroughened channel with coriolis and buoyancy forces, ASME Turbo Expo 2012, pp.2012-69406, 2012.

J. Zhou, R. J. Adrian, S. Balachandar, K. , and T. M. , Mechanisms for generating coherent packets of hairpin vortices in channel flow, Journal of Fluid Mechanics, vol.387, issue.10, pp.353-396, 1999.
DOI : 10.1017/S002211209900467X