Y. Akçay, Three Essays on Resource Allocation Problems: Inventory Management in Management in Assemble-To-Order Systems and Online Assignment of Flexible Resources, " A Thesis in the Pennsylvania, 2002.

Y. Akçay and S. H. Xu, Joint Inventory Replenishment and Component Allocation Optimization in an Assemble-to-Order System, Management Science, vol.50, issue.1, pp.99-116, 2004.
DOI : 10.1287/mnsc.1030.0167

S. Benjaafar and M. Elhafsi, A Production-Inventory System With Both Patient and Impatient Demand Classes, IEEE Transactions on Automation Science and Engineering, vol.9, issue.1, pp.148-159, 2012.
DOI : 10.1109/TASE.2011.2158645

S. Benjaafar and M. Elhafsi, Production and Inventory Control of a Single Product Assemble-to-Order System with Multiple Customer Classes, Management Science, vol.52, issue.12, pp.1896-1912, 2006.
DOI : 10.1287/mnsc.1060.0588

S. Benjaafar, M. Elhafsi, D. Véricourt, and F. , Demand Allocation in Multiple-Product, Multiple-Facility, Make-to-Stock Systems, Management Science, vol.50, issue.10, 2004.
DOI : 10.1287/mnsc.1040.0250

S. Benjaafar, M. Elhafsi, and T. Huang, Optimal Control of a Production- Inventory System with both Backorders and Lost Sales, Naval Research Logistics, 2010.

S. Benjaafar, M. Elhafsi, C. Lee, and W. Zhou, Optimal Control of an Assembly System with Multiple Stages and Multiple Demand Classes, SSRN Electronic Journal, vol.59, issue.2, pp.522-529, 2011.
DOI : 10.2139/ssrn.1688184

S. Benjaafar, J. Gayon, and S. Tepe, Optimal control of a production???inventory system with customer impatience, Operations Research Letters, vol.38, issue.4, pp.267-272, 2010.
DOI : 10.1016/j.orl.2010.03.008
URL : https://hal.archives-ouvertes.fr/hal-00575609

J. A. Buzacott and J. G. Shanthikumar, Stochastic Models of Manufacturing Systems, 1993.

R. Cavazos-cadena and L. I. Sennott, Comparing recent assumptions for the existence of average optimal stationary policies, Operations Research Letters, vol.11, issue.1, 1992.
DOI : 10.1016/0167-6377(92)90059-C

F. Chen, Optimal Policies for Multi-Echelon Inventory Problems with Batch Ordering, Operations Research, vol.48, issue.3, pp.376-389, 2000.
DOI : 10.1287/opre.48.3.376.12427

F. Cheng, M. Ettl, Y. Lu, D. D. Yao, I. T. Paper et al., A two stage push-pull production planning model, 2005.

F. Cheng, M. Ettl, G. Lin, and D. D. Yao, Inventory-Service Optimization in Configure-to-Order Systems, IBM Research Division, IBM T.J. Watson Research Center, 2000.
DOI : 10.1287/msom.4.2.114.282

C. Chiang, Optimal replenishment for a periodic review inventory system with two supply modes, European Journal of Operational Research, vol.149, issue.1, pp.229-244, 2003.
DOI : 10.1016/S0377-2217(02)00446-0

E. B. Çil, E. L. Örmeci, and F. Karaesmen, Effects of system parameters on the optimal policy structure in a class of queueing control problems, Queueing Systems, vol.47, issue.4, pp.273-304, 2009.
DOI : 10.1007/s11134-009-9109-x

M. A. Cohen, P. R. Kleindorfer, and H. L. Lee, ) Inventory Systems with Priority Demand Classes and Lost Sales, Management Science, vol.34, issue.4, 1988.
DOI : 10.1287/mnsc.34.4.482

A. Y. Ha, /1 Make-to-Stock Queue, Management Science, vol.46, issue.1, pp.77-87, 2000.
DOI : 10.1287/mnsc.46.1.77.15135

B. Hajek, Optimal control of two interacting service stations, IEEE Transactions on Automatic Control, vol.29, issue.6, pp.491-499, 1984.
DOI : 10.1109/TAC.1984.1103577

W. H. Hausman, H. L. Lee, and A. X. Zhang, Joint demand fulfillment probability in a multi-item inventory system with independent order-up-to policies, European Journal of Operational Research, vol.109, issue.3, pp.646-659, 1998.
DOI : 10.1016/S0377-2217(97)00152-5

K. M. Hoen, R. Güllü, G. J. Van-houtuma, and I. M. Vliegen, A simple and accurate approximation for the order fill rates in lost-sales Assemble-to-Order systems, International Journal of Production Economics, vol.133, issue.1, pp.95-104, 2011.
DOI : 10.1016/j.ijpe.2009.12.012

B. Huang and S. M. Iravani, Technical Note???A Make-to-Stock System with Multiple Customer Classes and Batch Ordering, Operations Research, vol.56, issue.5, pp.1312-1320, 2008.
DOI : 10.1287/opre.1080.0549

A. G. Karaarslan, G. P. Kiesmüllerb, D. Kok, and A. G. , Analysis of an assemble-to-order system with different review periods, International Journal of Production Economics, vol.143, issue.2, pp.335-341, 2013.
DOI : 10.1016/j.ijpe.2011.11.030

S. Ko, J. Y. Choi, and D. Seo, Approximations of lead-time distributions in an assemble-to-order system under a base-stock policy, Computers & Operations Research, vol.38, issue.2, pp.582-590, 2011.
DOI : 10.1016/j.cor.2010.07.020

G. Koole, Monotonicity in Markov Reward and Decision Chains: Theory and Applications Foundation and Trends in Stochastic Systems, pp.1-76, 2006.

G. Koole, Structural Results for the Control of Queueing Systems Using Event-Based Dynamic Programming, Queueing Systems, vol.30, pp.30-40323, 1998.

Z. Li, M. Elhafsi, H. Camus, and E. Craye, Optimal Control of a Lost Sales ATO System with Component Demand, 5th International Conference " Management of Technology-Step to Sustainable Production, pp.1848-9591, 2013.

Z. Li, M. Elhafsi, H. Camus, and E. Craye, Optimal Control of both lost sales and backorders ATO System with Component Demand, International Conference on Reasoning and Optimization in Information Systems, 2013.

S. Lippman, Applying a New Device in the Optimization of Exponential Queuing Systems, Operations Research, vol.23, issue.4, pp.687-710, 1975.
DOI : 10.1287/opre.23.4.687

L. Lu, J. Song, and H. Q. Zhang, Optimal and Asymptotically Optimal Policies for an Assemble-to-Order N-System Working paper, The Fuqua School of Business, 2012.

Y. Lu, Estimation of average backorders for an assemble-to-order system with random batch demands through extreme statistics, Naval Research Logistics, vol.6, issue.1, 2006.
DOI : 10.1002/nav.20174

Y. Lu and J. Song, Order-Based Cost Optimization in Assemble-to-Order Systems, Operations Research, vol.53, issue.1, pp.151-169, 2005.
DOI : 10.1287/opre.1040.0146

Y. Lu, J. Song, and Z. Yao, No-Holdback Allocation Rules for Continuous-Time Assemble-to-Order Systems, Operations Research, vol.58, issue.3, pp.691-705, 2010.
DOI : 10.1287/opre.1090.0785

Y. Lu, J. Song, and D. D. Yao, Backorder minimization in multiproduct assemble-to-order systems, IIE Transactions, vol.37, issue.8, pp.763-774, 2005.
DOI : 10.1287/opre.50.5.889.372

H. V. Michael and M. W. Lawrence, Optimal control of a two-station tandem production/inventory system, Operations Research, vol.42, issue.2, pp.337-350, 1994.

E. L. Plambeck and A. R. Ward, Note: A Separation Principle for a Class of Assemble-to-Order Systems with Expediting, Operations Research, vol.55, issue.3, pp.603-609, 2007.
DOI : 10.1287/opre.1060.0372

E. Porteus, Conditions for characterizing the structure of optimal strategies in infinite-horizon dynamic programs, Journal of Optimization Theory and Applications, vol.25, issue.3, pp.419-432, 1982.
DOI : 10.1007/BF00934355

E. Porteus, On the Optimality of Structured Policies in Countable Stage Decision Processes, Management Science, vol.22, issue.2, pp.148-157, 1975.
DOI : 10.1287/mnsc.22.2.148

M. Puterman, Markov Decision Processes: Discrete Stochastic Dynamic Programming, 1994.
DOI : 10.1002/9780470316887

M. I. Reiman and Q. Wang, A stochastic program based lower bound for assemble-to-order inventory systems, Operations Research Letters, vol.40, issue.2, pp.89-95, 2012.
DOI : 10.1016/j.orl.2011.12.001

K. A. Rosling, Optimal Inventory Policies for Assembly Systems Under Random Demands, Operations Research, vol.37, issue.4, pp.565-579, 1989.
DOI : 10.1287/opre.37.4.565

S. M. Ross, Applied Probability Models with Optimization Applications, 1969.

C. Schmidt and S. Nahmias, Optimal Policy for a Two-Stage Assembly System under Random Demand, Operations Research, vol.33, issue.5, pp.1130-1145, 1985.
DOI : 10.1287/opre.33.5.1130

J. Song, On the Order Fill Rate in a Multi-Item, Base-Stock Inventory System, Operations Research, vol.46, issue.6, pp.831-845, 1998.
DOI : 10.1287/opre.46.6.831

J. Song, S. H. Xu, and . B. Liu, Order-Fulfillment Performance Measures in an Assemble-to-Order System with Stochastic Leadtimes, Operations Research, vol.47, issue.1, 1999.
DOI : 10.1287/opre.47.1.131

J. Song and D. D. Yao, Performance Analysis and Optimization of Assemble-to-Order Systems with Random Lead Times, Operations Research, vol.50, issue.5, pp.889-903, 2002.
DOI : 10.1287/opre.50.5.889.372

J. Song and P. Zipkin, Supply Chain Operations: Assemble-to-Order Systems, Handbooks in Operations Research and Management Science, pp.561-596, 2003.
DOI : 10.1016/S0927-0507(03)11011-0

S. Stidham and R. R. Weber, Monotonic and Insensitive Optimal Policies for Control of Queues with Undiscounted Costs, Operations Research, vol.37, issue.4, pp.611-625, 1989.
DOI : 10.1287/opre.37.4.611

D. Topkis, Minimizing a Submodular Function on a Lattice, Operations Research, vol.26, issue.2, pp.305-321, 1978.
DOI : 10.1287/opre.26.2.305

R. R. Weber and S. Stidham, Optimal control of service rates in networks of queues, Advances in Applied Probability, vol.98, issue.01, pp.202-218, 1987.
DOI : 10.2307/1426467

Y. Xiao, J. Chen, and C. Lee, Optimal decisions for assemble-to-order systems with uncertain assembly capacity, International Journal of Production Economics, vol.123, issue.1, pp.155-165, 2010.
DOI : 10.1016/j.ijpe.2009.07.012

Y. Xiao, J. Chen, and C. Lee, Single-Period Two-Product Assemble-to-Order Systems with a Common Component and Uncertain Demand Patterns, Production and Operations Management, vol.19, issue.2, pp.216-232, 2010.
DOI : 10.1111/j.1937-5956.2009.01074.x

J. Xu, S. Chen, B. Lin, and R. Bhatnagar, Optimal production and rationing policies of a make-to-stock production system with batch demand and backordering, Operations Research Letters, vol.38, issue.3, pp.231-235, 2010.
DOI : 10.1016/j.orl.2010.01.006

S. H. Xu, Dependence Analysis of Assemble-to-Order Systems Chapter 11 in Supply Chain Structures: Condition, Information and Optimization, pp.359-414, 2001.

S. H. Xu, Structural Analysis of a Queueing System with Multiclasses of Correlated Arrivals and Blocking, Operations Research, vol.47, issue.2, pp.264-276, 1999.
DOI : 10.1287/opre.47.2.264

C. A. Yano, Stochastic Leadtimes in Two-Level Assembly Systems, IIE Transactions, vol.19, issue.4, pp.371-378, 1987.
DOI : 10.1287/mnsc.33.1.95

A. X. Zhang, Demand fulfillment rates in an assemble-to-order system with multiple products and dependent demands, 1997.

H. Zhao, V. Deshpande, and J. K. Ryan, Inventory Sharing and Rationing in Decentralized Dealer Networks, Management Science, vol.51, issue.4, pp.531-547, 2005.
DOI : 10.1287/mnsc.1040.0321

H. Zhao, J. K. Ryan, and V. Deshpande, Optimal Dynamic Production and Inventory Transshipment Policies for a Two-Location Make-to-Stock System, Operations Research, vol.56, issue.2, pp.400-410, 2008.
DOI : 10.1287/opre.1070.0494

Y. Zhao, Analysis and evaluation of an Assemble-to-Order system with batch ordering policy and compound Poisson demand, European Journal of Operational Research, vol.198, issue.3, pp.800-809, 2009.
DOI : 10.1016/j.ejor.2008.10.016

Y. Zheng and P. Zipkin, A Queueing Model to Analyze the Value of Centralized Inventory Information, Operations Research, vol.38, issue.2, pp.296-307, 1990.
DOI : 10.1287/opre.38.2.296

P. Zipkin, Foundations of Inventory Management, Fuqua School of Business, 2000.