Materials development for intermediate-temperature solid oxide electrochemical devices, J. Mater. Sci, vol.47, pp.3925-3948, 2012. ,
Recent developments in Ruddlesden???Popper nickelate systems for solid oxide fuel cell cathodes, Journal of Solid State Electrochemistry, vol.121, issue.56, 2006. ,
DOI : 10.1007/s10008-006-0127-x
Modeling the effective thermal conductivity of random packing of spheres through densification, International Journal of Heat and Mass Transfer, vol.39, issue.7, pp.1343-1350, 1996. ,
DOI : 10.1016/0017-9310(95)00257-X
Advanced anodes for high-temperature fuel cells, Nature Materials, vol.3, issue.1, pp.17-27, 2004. ,
DOI : 10.1038/nmat1040
Materials for solid oxide fuel cells, 1997. ,
Milosevic: Scandia?zirconia electrolytes for intermediate temperature solid oxide fuel cell operation, Solid State Ionics, pp.136-137, 2000. ,
Influence of synthesis route on the catalytic properties of La1???xSrxMnO3, Solid State Ionics, vol.131, issue.3-4, pp.3-4, 2000. ,
DOI : 10.1016/S0167-2738(00)00668-8
Oxygen diffusion and transport properties in non-stoichiometric Ln 2-x NiO 4+ oxides Solid State Ionics, pp.2717-2725, 2005. ,
Grain Size Dependence of Ionic Conductivity in 8YSZ Nanostructured Ceramics for IT-SOFC On constrained sintering-II, Comparison of Constitutive Models, Proc. 7th European SOFC Forum, B05, No. B052 (Bordia, pp.2399-2409, 1988. ,
Relation between percolation and particle coordination in binary powder mixtures, Acta Metallurgica et Materialia, vol.39, issue.12, pp.3083-3090, 1991. ,
DOI : 10.1016/0956-7151(91)90041-X
Deformation of Interparticle Necks by Diffusion-Controlled Creep, Journal of the American Ceramic Society, vol.40, issue.3, pp.666-72, 1996. ,
DOI : 10.1111/j.1151-2916.1996.tb07927.x
Messing : Constrained Densification of Alumina/Zirconia Hybrid Laminates, I: Experimental Observations of Processing Defects, J, 1997. ,
Messing : Constrained Densification of Alumina/Zirconia Hybrid Laminates, II: Viscoelastic Stress Computation, J. Am. Ceram. Soc, pp.80-88, 1997. ,
Chable: Circuits hybrides à couches épaisses. Monographies d'électronique, 1993. ,
Procédés de mise en forme des céramiques, Matériaux et processus céramiques, pp.141-217, 2001. ,
Performance of an anode-supported SOFC with anode functional layers, Electrochimica Acta, vol.53, issue.27, pp.7825-7830, 2008. ,
DOI : 10.1016/j.electacta.2008.05.063
Performance evolution of NiO/yttria-stabilized zirconia anodes fabricated at different compaction pressures, Electrochimica Acta, vol.54, issue.4, pp.1355-1361, 2009. ,
DOI : 10.1016/j.electacta.2008.09.024
Initial Sintering of Alumina and Hematite, Journal of the American Ceramic Society, vol.188, issue.4, pp.41-55, 1958. ,
DOI : 10.1088/0370-1301/62/12/310
Effect of Al and Ce doping on the deformation upon sintering in sequential tape cast layers for solid oxide fuel cells, Journal of Power Sources, vol.193, issue.1, pp.80-85, 2009. ,
DOI : 10.1016/j.jpowsour.2008.12.052
Influence of the densification parameters on screen-printed component properties, Journal of the European Ceramic Society, vol.25, issue.12, pp.2115-2119, 2005. ,
DOI : 10.1016/j.jeurceramsoc.2005.03.206
Conductivity of Porous Ni???ZrO[sub 2]-Y[sub 2]O[sub 3] Cermets, Journal of The Electrochemical Society, vol.134, issue.9, pp.2141-2146, 1987. ,
DOI : 10.1149/1.2100839
Theoretical optimisation of a SOFC composite cathode, Electrochimica Acta, vol.50, issue.10, pp.2037-2046, 2005. ,
DOI : 10.1016/j.electacta.2004.09.012
URL : https://hal.archives-ouvertes.fr/hal-00417212
Micromodeling of Functionally Graded SOFC Cathodes, Journal of The Electrochemical Society, vol.154, issue.10, pp.1012-1016, 2007. ,
DOI : 10.1149/1.2766651
URL : https://hal.archives-ouvertes.fr/hal-00386377
Generalized formula for curvature radius and layer stresses caused by thermal strain in semiconductor multilayer structures, Journal of Applied Physics, vol.54, issue.1, pp.83-85, 1983. ,
DOI : 10.1063/1.331690
High performance praseodymium nickelate oxide cathode for low temperature solid oxide fuel cell, Journal of Power Sources, vol.196, issue.4, pp.1872-1879, 2011. ,
DOI : 10.1016/j.jpowsour.2010.09.036
URL : https://hal.archives-ouvertes.fr/hal-00551672
Oxide anode materials for solid oxide fuel cells, Solid State Ionics, vol.177, issue.17-18, pp.1529-1541, 2006. ,
DOI : 10.1016/j.ssi.2006.07.012
Preparation and characterization of neodymium-doped ceria electrolyte materials for solid oxide fuel cells, Ceramics International, vol.36, issue.2, pp.483-490, 2010. ,
DOI : 10.1016/j.ceramint.2009.09.013
Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid-Oxide Fuel Cell, Advanced Materials, vol.12, issue.19, pp.1465-1469, 2000. ,
DOI : 10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9
Three-Dimensional Reconstruction of Porous LSCF Cathodes, Electrochemical and Solid-State Letters, vol.10, issue.12, pp.10-12, 2007. ,
DOI : 10.1149/1.2794672
Etude et réalisation par coulage en bande et co-frittage de cellules de pile à combustible à oxydes solides, 2004. ,
Electrochemical properties of Ni???YSZ cermet in solid oxide fuel cells Effect of current collecting, Solid State Ionics, vol.127, issue.1-2, pp.99-107, 2000. ,
DOI : 10.1016/S0167-2738(99)00254-4
Rödel : Constrained Sintering of Alumina Thin Films: Comparison Between Experiment and Modeling, J. Am. Ceram. Soc, pp.90-96, 2007. ,
Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCs, Journal of Power Sources, vol.141, issue.2, pp.216-226, 2005. ,
DOI : 10.1016/j.jpowsour.2004.09.016
Temperature effect on the electrical properties of undoped NiO thin films, Renewable Energy, vol.34, issue.12, pp.2625-2629, 2009. ,
DOI : 10.1016/j.renene.2009.05.014
Degradation of the electrical conductivity in stabilised zirconia systemPart II: Scandia-stabilised zirconia, Solid State Ionics, vol.176, issue.3-4, pp.261-268, 2005. ,
DOI : 10.1016/j.ssi.2004.07.039
Effect of Bi2O3 additives in Sc stabilized zirconia electrolyte on a stability of crystal phase and electrolyte properties, Solid State Ionics, vol.158, issue.3-4, pp.215-223, 2003. ,
DOI : 10.1016/S0167-2738(02)00912-8
Improved power generation performance of solid oxide fuel cells using doped LaGaO3 electrolyte films prepared by screen printing method II. Optimization of Ni-Ce 0.8 Sm 0.2 O 1.9 cermet anode support, Wang : Modeling the Influence of Carbon Spheres on the Porosity of SOFC Anode Materials, pp.4632-4642, 2011. ,
Effect of composite pore-former on the fabrication and performance of anode-supported membranes for SOFCs, Journal of Membrane Science, vol.318, issue.1-2, pp.445-451, 2008. ,
DOI : 10.1016/j.memsci.2008.03.008
Materials and technologies for SOFC-components, Journal of the European Ceramic Society, vol.21, issue.10-11, pp.1805-1811, 2001. ,
DOI : 10.1016/S0955-2219(01)00120-0
Electrical properties and oxygen diffusion in yttria-stabilised zirconia (YSZ)???LaSrMnO (LSM) composites, Solid State Ionics, vol.176, issue.9-10, pp.937-943, 2004. ,
DOI : 10.1016/j.ssi.2004.11.019
Iwata: Characteristics of slurry-coated nickel zirconia cermet anodes for solid oxide fuel cells, J. Electrochem. Soc, vol.10, pp.137-3042, 1990. ,
Solid-oxide fuel cells with hydrocarbon fuels, Proceedings of the Combustion Institute, p.2379, 2005. ,
DOI : 10.1016/j.proci.2004.08.277
Engineering of microstructure and design of a planar porous composite SOFC cathode: A numerical analysis, Solid State Ionics, vol.178, issue.3-4, pp.297-306, 2007. ,
DOI : 10.1016/j.ssi.2006.12.009
Ni-YSZ cermet anode fabricated from NiO-YSZ composite powder for highperformance and durability of solid oxide fuel cells, Solid State Ionics, vol.178, pp.21-22, 2007. ,
A phenomenological constitutive model for the sintering of alumina powder, Journal of the European Ceramic Society, vol.23, issue.10, pp.1675-1685, 2003. ,
DOI : 10.1016/S0955-2219(02)00411-9
Rapid phase transformation of zirconia in the Ni-ScSZ cermet anode under reducing condition, Solid State Ionics, vol.179, issue.35-36, pp.2037-204, 2008. ,
DOI : 10.1016/j.ssi.2008.06.024
Properties of Ni/YSZ cermet as anode for SOFC, Solid State Ionics, vol.132, issue.3-4, pp.253-260, 2000. ,
DOI : 10.1016/S0167-2738(00)00652-4
Performance of solid oxide electrolysis cells based on scandia stabilised zirconia, &KHPLFDO UHDFWLYLW\ RI SHURYVNLWHR[LGH62)&FDWKRGHVDQG\WWULDVWDELOLVHG]LUFRQLDSolid State IonicsSS, pp.126-131, 2009. ,
Neodymium-deficient nickelate oxide Nd 1.95 NiO 4+ as cathode material for anode-supported intermediate temperature solid oxide fuel cells, Journal of Power Sources, vol.185, pp.1218-1224, 2008. ,
Constitutive modeling of the behaviour of cermet compacts during reaction sintering, Powder Technology, vol.208, issue.2, pp.496-502, 2011. ,
DOI : 10.1016/j.powtec.2010.08.049
URL : https://hal.archives-ouvertes.fr/hal-00633938
Microstructure and anodic properties of Ni/YSZ cermets in solid oxide fuel cells Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni-YSZ cermet, ) D.S. Lee, W.S. Kim: Characterization of ZrO 2 co-doped with Sc 2 O 3 and CeO, 1997. ,
Sintering Arches for Cosintering Camber-Free SOFC Multilayers, Journal of the American Ceramic Society, vol.264, issue.6, pp.91-93, 2008. ,
DOI : 10.1111/j.1551-2916.2006.01054.x
Microstructure of porous composite electrodes generated by the discrete element method, Journal of Power Sources, vol.196, issue.4, pp.2046-2054, 2011. ,
DOI : 10.1016/j.jpowsour.2010.09.033
URL : https://hal.archives-ouvertes.fr/hal-00633954
Cathode-supported micro-tubular SOFCs based on Nd1.95NiO4+??: Fabrication and characterisation of dip-coated electrolyte layers, Solid State Ionics, vol.180, issue.11-13, pp.805-811, 2009. ,
DOI : 10.1016/j.ssi.2009.01.010
URL : https://hal.archives-ouvertes.fr/hal-00401253
Influence of pore formers on physical properties and microstructures of supporting cathodes of solid oxide electrolysis cells, International Journal of Hydrogen Energy, vol.35, issue.7, pp.2670-2674, 2010. ,
DOI : 10.1016/j.ijhydene.2009.04.027
Henning Luebbe Cécile Lalanne: Cathode-supported micro-tubular SOFCs based on Nd 1.95 NiO 4+ : Fabrication and characterisation of dip-coated electrolyte layers, Solid State Ionics, vol.180, pp.805-811, 2009. ,
Study of particle rearrangement during powder compaction by the Discrete Element Method, Journal of the Mechanics and Physics of Solids, vol.51, issue.4, pp.667-693, 2003. ,
DOI : 10.1016/S0022-5096(02)00101-1
Discrete Element Simulations of the Compaction of Aggregated Ceramic Powders, Journal of the American Ceramic Society, vol.109, issue.11, pp.3379-3387, 2006. ,
DOI : 10.1016/0167-6636(93)90029-Q
Discrete element modeling of metallic powder sintering, Scripta Materialia, vol.55, issue.5, pp.425-428, 2006. ,
DOI : 10.1016/j.scriptamat.2006.05.017
URL : https://hal.archives-ouvertes.fr/hal-00141807
The effect of a substrate on the sintering of constrained films, Acta Materialia, vol.57, issue.2, pp.549-558, 2009. ,
DOI : 10.1016/j.actamat.2008.09.041
URL : https://hal.archives-ouvertes.fr/hal-00428620
Oxygen electrode reaction on Nd2NiO4+?? cathode materials: impedance spectroscopy study, Solid State Ionics, vol.158, issue.1-2, pp.17-28, 2003. ,
DOI : 10.1016/S0167-2738(02)00689-6
URL : https://hal.archives-ouvertes.fr/hal-00258278
Oxygen reduction on porous Ln 2 NiO 4+ electrodes, Journal of the European Ceramic Society, vol.25, pp.2669-2672, 2005. ,
URL : https://hal.archives-ouvertes.fr/hal-00019433
Electrode properties of Ln 2 NiO 4?+? ?(?Ln=?La?,? Nd?,? Pr?)? : AC impedance and DC Polarization Studies, Journal of the Electrochemical Society, issue.8, pp.153-1547, 2006. ,
Abatzoglou: Connected three-phase boundary valuation in modelled sintered composite solid oxide fuel cel electrodes, Journal of The Electrochemical Society, vol.157, pp.9-1326, 2010. ,
Influence of pore formers on physical properties and microstructures of supporting cathodes of solid oxide electrolysis cells, International Journal of Hydrogen Energy, vol.35, issue.7, pp.2670-2674, 2010. ,
DOI : 10.1016/j.ijhydene.2009.04.027
Science and technology of ceramic fuel cells, Elsevier Science B.V. ISBN, vol.0, pp.444-89568, 1995. ,
Twiname : Tape Casting ? Theory and Practice, 2000. ,
Functional materials for the IT-SOFC, Journal of Power Sources, vol.173, issue.2, pp.657-670, 2007. ,
DOI : 10.1016/j.jpowsour.2007.05.085
Stoöver : Cofiring of Thin Zirconia Films During SOFC Manufacturing, Preparation and evaluation of doped ceria interlayer on supported stabilized zirconia electrolyte SOFCs by wet ceramic processes. Solid State Ionics, pp.92-93, 2004. ,
Torben: Impedance of porous IT-SOFC LSCF:CGO composite cathodes, Electrochimica Acta, vol.23, issue.56, pp.7963-7974, 2011. ,
2009) C. Périllat ? Merceroz : Titanates de structures pérovskite et dérivées : Influence des éléments constitutifs et de la dimensionnalité sur les propriétés d'anode SOFC, Thèse, 2009. ,
Investigation of scandia???yttria???zirconia system as an electrolyte material for intermediate temperature fuel cells???influence of yttria content in system (Y2O3)x(Sc2O3)(11???x)(ZrO2)89, Solid State Ionics, vol.168, issue.1-2, pp.153-165, 2004. ,
DOI : 10.1016/j.ssi.2004.02.007
Les piles à combustibles, état du développement et des recherches en cours. Publications de l'institut français du pétrole Mogensen : Oxidation of hydrogen on Ni/Yttria-Stabilized Zirconia Crmets anodes, Primdahl, 1997) S. Primdahl, M, pp.3409-3419, 1997. ,
Improving Gd-Doped Ceria Electrolytes for Low Temperature Solid Oxide Fuel Cells, MRS Proceedings, vol.1, issue.6, p.575, 2001. ,
DOI : 10.1016/0167-2738(94)00242-K
Etude et optimisation de la mise en forme de céramiques par voie humide pour le préparation de cellules électrochimiques de type SOFC, 2008. ,
Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC, Journal of the European Ceramic Society, vol.28, issue.9, pp.1801-1808, 2008. ,
DOI : 10.1016/j.jeurceramsoc.2007.11.018
Microstructural optimisation of materials for SOFC applications using PMMA microspheres, Journal of Materials Chemistry, vol.159, issue.3, pp.540-542, 2006. ,
DOI : 10.1039/b515747a
Bismuth based oxide electrolytes??? structure and ionic conductivity, Journal of the European Ceramic Society, vol.19, issue.10, pp.1801-1826, 1999. ,
DOI : 10.1016/S0955-2219(99)00009-6
Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs, Journal of the European Ceramic Society, vol.28, issue.6, pp.1221-1226, 2008. ,
DOI : 10.1016/j.jeurceramsoc.2007.10.001
Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells, Solid State Ionics, vol.132, issue.3-4, pp.241-251, 2000. ,
DOI : 10.1016/S0167-2738(00)00650-0
Solid oxide fuel cells for stationary, mobile, and military applications. Solid State Ionics, pp.152-153, 2002. ,
Pore former induced porosity in LSM/CGO cathodes for electrochemical cells for flue gas purification, Ceramics International, vol.38, issue.2, pp.1751-1754, 2012. ,
DOI : 10.1016/j.ceramint.2011.09.052
Discrete modelling of the electrochemical performance of SOFC electrodes, Electrochimica Acta, vol.52, issue.1, pp.314-324, 2006. ,
DOI : 10.1016/j.electacta.2006.05.018
URL : https://hal.archives-ouvertes.fr/hal-00141835
Elaboration par coulage en bande et caractérisation de composites fibreux à matrice à base de ciment alumineux, Thèse de l'université de Limoges, 2005. ,
Properties and applications of Ce(Gd)O 2-x electrolytes in the temperature range 500-700°C, Proceedings of the fourth international symposium on solid oxide fuel cells, édité par the Electrochemical Society, pp.1028-1038, 1995. ,
Preparation and electrochemical properties of Sr-doped Nd2NiO4 cathode materials for intermediate-temperature solid oxide fuel cells, Journal of Power Sources, vol.183, issue.1, pp.43-48, 2008. ,
DOI : 10.1016/j.jpowsour.2008.05.001
Performance of nickel?scandia-stabilized zirconia cermet anodes for SOFCs in 3% H2O?CH4, Solid State Ionics, vol.174, pp.151-156, 2004. ,
Investigation on microstructures of NiO???YSZ composite and Ni???YSZ cermet for SOFCs, International Journal of Hydrogen Energy, vol.35, issue.17, pp.9440-9447, 2010. ,
DOI : 10.1016/j.ijhydene.2010.04.156
Structural evolution of Sc-containing zirconia electrolytes, Solid State Ionics, vol.100, issue.3-4, pp.289-295, 1997. ,
DOI : 10.1016/S0167-2738(97)00356-1
Increasing Solid Oxide Fuel Cell power densities at Low Temperatures using thin-film electrolytes and enhanced electrodes, p.9731356, 1997. ,
Characterization of solid oxide fuel cell electrodes by impedance spectroscopy and I-V characteristics, Solid State Ionics, vol.72, issue.240, 1994. ,
Rodríguez-Martínez: Solid oxide fuel cells based on metal electrodes ,