L. Tableau and 3. , 13 récapitule les changements apportés par l'introduction d'une technologie RFID par

S. Baishun, Z. Et, and . Baoding, The application of MES in electronic assembly industry based on RFID, 2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce (AIMSEC), pp.1604-1607, 2011.
DOI : 10.1109/AIMSEC.2011.6010848

. Baker, Optimal Allocation of Work in Assembly Systems, Management Science, vol.39, issue.1, pp.101-106, 1993.
DOI : 10.1287/mnsc.39.1.101

O. Balci, Verification, validation, and accreditation, 1998 Winter Simulation Conference. Proceedings (Cat. No.98CH36274), pp.41-48, 1998.
DOI : 10.1109/WSC.1998.744897

R. H. Ballou, Business logistics/supply chain management : planning, organizing , and controlling the supply chain, 2004.

J. Banks, J. S. Carson, B. L. Nelson, and D. M. Nicol, Discrete-Event System Simulation, 2010.

J. Bard, Assembly line balancing with parallel workstations and dead time, International Journal of Production Research, vol.8, issue.6, pp.1005-1018, 1989.
DOI : 10.1287/mnsc.30.1.85

J. J. Bartholdi, Balancing two-sided assembly lines: a case study, International Journal of Production Research, vol.31, issue.10, pp.2447-2461, 1993.
DOI : 10.1016/0167-6377(82)90046-3

. Bartholdi, Bucket brigades on in-tree assembly networks, European Journal of Operational Research, vol.168, issue.3, pp.870-879, 2006.
DOI : 10.1016/j.ejor.2004.07.034

. Bibliographie and . Bartholdi, Selforganizing logistics systems, Annual Reviews in Control, vol.34, issue.1, pp.111-117, 2010.

R. Batchelor, Henry Ford, mass production, modernism, and design, 1994.

C. Becker, A. Et, and . Scholl, A survey on problems and methods in generalized assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.694-715, 2006.
DOI : 10.1016/j.ejor.2004.07.023

S. Belmokhtar, Lignes d'usinage avec équipements standard : modélisation , configuration et optimisation, 2006.

R. Bottani, E. Bottani, A. Et, and . Rizzi, Economical assessment of the impact of RFID technology and EPC system on the fast-moving consumer goods supply chain, International Journal of Production Economics, vol.112, issue.2, pp.548-569, 2008.
DOI : 10.1016/j.ijpe.2007.05.007

. Boysen, A classification of assembly line balancing problems, European Journal of Operational Research, vol.183, issue.2, 2006.
DOI : 10.1016/j.ejor.2006.10.010

. Boysen, A classification of assembly line balancing problems, European Journal of Operational Research, vol.183, issue.2, pp.674-693, 2007.
DOI : 10.1016/j.ejor.2006.10.010

J. Buzacott, Abandoning the moving assembly line: models of human operators and job sequencing, International Journal of Production Research, vol.28, issue.5, pp.821-839, 1990.
DOI : 10.1080/00207549008942758

R. Chen, K. Lu, S. Yu, H. Tzeng, and E. C. Chang, A case study in the design of BTO/CTO shop floor control system, Information & Management, vol.41, issue.1, pp.25-37, 2003.
DOI : 10.1016/S0378-7206(03)00003-X

R. Chen, M. A. Et, and . Tu, Development of an agent-based system for manufacturing control and coordination with ontology and RFID technology, Expert Systems with Applications, vol.36, issue.4, pp.7581-7593, 2009.
DOI : 10.1016/j.eswa.2008.09.068

B. Chen, X. , Z. X. Xie, and E. L. Zheng, RFID-based manufacturing execution system for intelligent operations, 2009 16th International Conference on Industrial Engineering and Engineering Management, pp.843-847, 2009.
DOI : 10.1109/ICIEEM.2009.5344470

. Cohen, Considérez votre supply chain comme un atout stratégique, Avantage supply chain : les 5 leviers pour faire de votre supply chain un atout compétitif, 2005.

B. Daganzo, C. F. Daganzo, D. E. Et, and . Blumenfeld, Assembly system design principles and tradeoffs, International Journal of Production Research, vol.32, issue.3, pp.669-681, 1994.
DOI : 10.1287/mnsc.35.10.1215

. Davenport, Improving knowledge work processes, Sloan Management Review, vol.37, issue.4, pp.53-65, 1996.

P. Dolgui, A. Dolgui, J. Et, and . Proth, RFID TECHNOLOGY IN SUPPLY CHAIN MANAGEMENT: STATE OF THE ART AND PERSPECTIVES, IFAC World Congress, 2008.
DOI : 10.3182/20080706-5-KR-1001.00753

URL : https://hal.archives-ouvertes.fr/emse-00679098

. Dolgui, . Proth, A. Dolgui, J. Et, and . Proth, Design and Balancing of Paced Assembly Lines, Supply Chain Engineering Useful Methods and Techniques, pp.237-276, 2010.
DOI : 10.1007/978-1-84996-017-5_7

. Dolgui, . Proth, A. Dolgui, J. Et, and . Proth, Radio-frequency Identification (RFID): Technology and Applications, In Supply Chain Engineering Useful Methods and Techniques, pp.163-194, 2010.
DOI : 10.1007/978-1-84996-017-5_5

URL : https://hal.archives-ouvertes.fr/emse-00734894

D. Dreyer, Performance measurement : a practitioner's perspective, Supply Chain Management Review, vol.4, issue.4, pp.30-36, 2000.

E. Erel, S. C. Et, and . Sarin, A survey of the assembly line balancing procedures, Production Planning & Control, vol.9, issue.5, pp.414-434, 1998.
DOI : 10.1080/095372898233902

K. Fishman, G. S. Fishman, P. J. Et, and . Kiviat, The statistics of discrete-event simulation, SIMULATION, vol.10, issue.4, pp.185-195, 1968.
DOI : 10.1177/003754976801000406

J. Forrester, Industrial Dynamics: A Major Breakthrough for Decision Makers, Harvard business review, vol.36, issue.4, pp.37-66, 1958.
DOI : 10.1007/978-3-642-27922-5_13

. Gaukler, G. Seifert-gaukler, R. Et, and . Seifert, Applications of RFID in Supply Chains, Trends in Supply Chain Design and Management (1 ed.)., Chapter, pp.29-48, 2007.
DOI : 10.1007/978-1-84628-607-0_2

M. Ghiassi, C. Et, and . Spera, Defining the Internet-based supply chain system for mass customized markets, Computers & Industrial Engineering, vol.45, issue.1, pp.17-41, 2003.
DOI : 10.1016/S0360-8352(03)00017-2

. Ghosh, S. Gagnon-ghosh, R. Et, and . Gagnon, A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems, International Journal of Production Research, vol.18, issue.8, pp.637-670, 1989.
DOI : 10.1080/00207548908942574

. Haouari, A simulation approach to evaluate the impact of RFID technologies on a CTO environment, Proceedings of the 2011 Winter Simulation Conference (WSC), 2006.
DOI : 10.1109/WSC.2011.6147875

URL : https://hal.archives-ouvertes.fr/hal-00644008

. Haouari, Introduction of RFID technologies in a manufacturing system A discrete event simulation approach, International Conference on Simulation and Modeling Methodologies, Technologies and Applications, pp.523-529, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00643997

H. J. Harrington, Business Process Improvement : The Breakthrough Strategy for Total Quality, 1991.

J. Hauet, L'identification par radiofréquence (RFID) -Techniques et perspectives, 2006.

. Helgeson, How to Balance an Assembly Line, 1954.

B. Hillier, F. S. Hillier, R. W. Et, and . Boling, The effects of some design factors on the efficiency of production lines with variable operation times, Journal of Industrial Engineering, vol.17, issue.5, pp.651-658, 1966.

F. S. Hillier, K. C. Et, and . So, The effect of machine breakdowns and interstage storage on the performance of production line systems, International Journal of Production Research, vol.7, issue.10, pp.2043-2055, 1991.
DOI : 10.1080/00207548308942346

F. S. Hillier, K. C. Et, and . So, On the robustness of the bowl phenomenon, European Journal of Operational Research, vol.89, issue.3, pp.496-515, 1996.
DOI : 10.1016/0377-2217(94)00287-8

K. Hitomi, Manufacturing Systems Engineering, Journal of Dynamic Systems, Measurement, and Control, vol.103, issue.4, 1996.
DOI : 10.1115/1.3139686

S. Housseman, Modélisation et aide à la décision pour l'introduction de technologies communicantes en milieu hospitalier, 2011.

. Bibliographie and . Housseman, Dauzère-pérès Impacts of radio-identification on cryo-conservation centers, Transactions on Modeling and Computer Simulation, vol.21, issue.4, pp.1-25, 2011.

H. Hsu, W. Et, and . Wang, Dynamic programming for delayed product differentiation, European Journal of Operational Research, vol.156, issue.1, pp.183-193, 2004.
DOI : 10.1016/S0377-2217(03)00018-3

URL : https://ir.nctu.edu.tw:443/bitstream/11536/26630/1/000220047500014.pdf

. Hu, Assembly system design and operations for product variety, CIRP Annals -Manufacturing Technology, 2011.
DOI : 10.1016/j.cirp.2011.05.004

L. Huang, Y. Huang, S. Et, and . Li, How to achieve leagility: A case study of a personal computer original equipment manufacturer in Taiwan, Journal of Manufacturing Systems, vol.29, issue.2-3, pp.63-70, 2010.
DOI : 10.1016/j.jmsy.2010.09.001

. Jimenez, Impact of RFID technologies on helicopter processes : Assessment on costumer oriented indicators, American Helicopter Society 67th Annual Forum, pp.2254-2263, 2011.

D. R. Jones, M. A. Et, and . Beltramo, Solving partitioning problems with genetic algorithms, International Conference on Genetic Algorithms, 1991.

Y. V. Joshi, Information visibility and its effect on supply chain dynamics. Master of science thesis, 2000.

G. Kang, Y. Kang, S. B. Et, and . Gershwin, Information inaccuracy in inventory systems: stock loss and stockout, IIE Transactions, vol.43, issue.9, pp.843-859, 2005.
DOI : 10.1287/mnsc.32.3.272

. Kelton, Simio and simulation : Modeling, analysis, applications, 2011.

T. J. Kiba and -. , Simulation et optimisation du transport automatisé dans la fabrication de semi-conducteurs, 2010.

. Kim, Two-sided assembly line balancing: A genetic algorithm approach, Production Planning & Control, vol.11, issue.1, pp.44-53, 2000.
DOI : 10.1080/095372800232478

T. Klein, A. Et, and . Thomas, Opportunities to reconsider decision making processes due to Auto-ID, International Journal of Production Economics, vol.121, issue.1, pp.99-111, 2009.
DOI : 10.1016/j.ijpe.2008.04.017

URL : https://hal.archives-ouvertes.fr/hal-00151583

. Koren, Reconfigurable Manufacturing Systems, CIRP Annals - Manufacturing Technology, vol.48, issue.2, pp.527-540, 1999.
DOI : 10.1016/S0007-8506(07)63232-6

N. Kriengkorakot, N. Et, and . Pianthong, The Assembly Line Balancing Problem : Review articles, KKU Engineering Journal, vol.34, pp.133-140, 2007.

J. Landt, The history of RFID, IEEE Potentials, vol.24, issue.4, pp.8-11, 2005.
DOI : 10.1109/MP.2005.1549751

A. Law, M. Et, and . Mccomas, Pitfalls to avoid in the simulation of manufacturing systems, Industrial Engineering, vol.21, issue.5, pp.28-31, 1989.

A. M. Law, W. D. Et, and . Kelton, Simulation Modeling and Analysis, 2000.

T. Lebaron-et-jacobsen-lebaron, C. Et, and . Jacobsen, The simulation power of automod, Winter Simulation Conference, pp.210-218, 2007.

. Lee, Two-sided assembly line balancing to maximize work relatedness and slackness, Computers & Industrial Engineering, vol.40, issue.3, pp.273-292, 2001.
DOI : 10.1016/S0360-8352(01)00029-8

Y. Lee, F. Cheng, and E. Y. Leung, Exploring the Impact of RFID on Supply Chain Dynamics, Proceedings of the 2004 Winter Simulation Conference, 2004., pp.1145-1152, 2004.
DOI : 10.1109/WSC.2004.1371441

L. Lianzhi, K. Et, and . Fansen, A Research on Quality Traceability of Transmission Assembly Process Based on RFID Technology, 2010 3rd International Conference on Information Management, Innovation Management and Industrial Engineering, pp.343-346, 2010.
DOI : 10.1109/ICIII.2010.247

. Bibliographie, T. Liu, Y. Liu, S. Et, and . Takakuwa, Modeling of materials handling in a container terminal by using electronic real-time tracking data, Winter Simulation Conference, 2003.

M. J. Magazine, K. E. Et, and . Stecke, Throughput for production lines with serial work stations and parallel service facilities, Performance Evaluation, vol.25, issue.3, pp.211-232, 1996.
DOI : 10.1016/0166-5316(95)00005-4

. Mendes, Combining heuristic procedures and simulation models for balancing a PC camera assembly line, Computers & Industrial Engineering, vol.49, issue.3, pp.413-431, 2005.
DOI : 10.1016/j.cie.2005.07.003

. Menzel, Potentials for radio frequency identification in AEC/FM, Tsinghua Science and Technology, vol.13, issue.S1, pp.329-335, 2008.
DOI : 10.1016/S1007-0214(08)70170-6

K. J. Musselman, Guidelines for Success, Handbook of Simulation, pp.721-744, 1998.
DOI : 10.1002/9780470172445.ch22

. Ozbakir, Multiple-colony ant algorithm for parallel assembly line balancing problem, Applied Soft Computing, vol.11, issue.3, pp.3186-3198, 2011.
DOI : 10.1016/j.asoc.2010.12.021

. Pegden, Introduction to simulation using SIMAN, 1995.

R. Pike, G. E. Et, and . Martinj, The bowl phenomenon in unpaced lines, International Journal of Production Research, vol.9, issue.3, pp.483-499, 1994.
DOI : 10.1080/00207549008942788

. Pinto, Branch and bound and heuristic procedures for assembly line balancing with paralleling of stations, International Journal of Production Research, vol.6, issue.5, pp.565-576, 1981.
DOI : 10.1080/00207548108956687

. Poon, A real-time production operations decision support system for solving stochastic production material demand problems, Expert Systems with Applications, vol.38, issue.5, pp.4829-4838, 2011.
DOI : 10.1016/j.eswa.2010.09.162

B. Rekiek, Assembly line design, 2000.
URL : https://hal.archives-ouvertes.fr/emse-00708730

. Bibliographie and . Rekiek, Applying the equal piles problem to balance assembly lines, International Symposium on Assembly and Task Planning, pp.399-404, 1999.

B. Rekiek, A. Et, and . Delchambre, Ordering varinbats and simulation in multiproduct assembly lines, VR-Mech, pp.49-54, 1998.

. Robinson, The good, the bad and the ugly: Quality on an assembly line, International Journal of Production Research, vol.28, issue.5, pp.963-980, 1990.
DOI : 10.1080/00207549008942767

E. M. Rogers, Diffusion of innovations, 1962.

M. E. Salveson, The assembly line balancing problem, Journal of Industrial Engineering, vol.6, pp.18-25, 1955.

. Sarac, A simulation approach to evaluate the impact of introducing RFID technologies in a three-level supply chain, 2008 Winter Simulation Conference, pp.2741-2749, 2008.
DOI : 10.1109/WSC.2008.4736392

A. Sarac, N. Absi, and S. Dauzère-pérès, A literature review on the impact of RFID technologies on supply chain management, International Journal of Production Economics, vol.128, issue.1, pp.77-95, 2010.
DOI : 10.1016/j.ijpe.2010.07.039

URL : https://hal.archives-ouvertes.fr/emse-00509315

R. G. Sargent, Verification and validation of simulation models, Winter Simulation Conference, pp.166-183, 2010.

. Saygin, A Systems Approach to Viable RFID Implementation in the Supply Chain, Trends in Supply Chain Design and Management, pp.3-27, 2007.
DOI : 10.1007/978-1-84628-607-0_1

T. Schmidt, J. W. Schmidt, R. E. Et, and . Taylor, Simulation and analysis of industrial systems, R. D. Irwin, 1970.

T. J. Schriber, D. T. Et, S. J. Brunner, R. R. Mason, L. Hill et al., Inside discreteevent simulation software : How it works and why it matters, Winter Simulation Conference, pp.182-192, 2008.

W. Sen, S. Pokharel, and E. W. Yulei, Supply chain positioning strategy integration, evaluation, simulation, and optimization, Computers & Industrial Engineering, vol.46, issue.4, pp.781-792, 2004.
DOI : 10.1016/j.cie.2004.05.009

J. Song, P. Et, and . Zipkin, Supply Chain Operations: Assemble-to-Order Systems, Supply Chain Management : Design, Coordination and Operation Operations Research and Management Science, pp.561-596, 2003.
DOI : 10.1016/S0927-0507(03)11011-0

. Suwannarongsri, A new hybrid intelligent method for assembly line balancing, 2007 IEEE International Conference on Industrial Engineering and Engineering Management, pp.1115-1119, 2007.
DOI : 10.1109/IEEM.2007.4419365

J. J. Swain, New frontiers in simulation (Biennial survey of discrete-event simulation software), MS Today, vol.34, issue.5, pp.32-43, 2007.

D. Swets, R. J. Swets, G. R. Et, and . Drake, The Arena product family: enterprise modeling solutions, Proceeding of the 2001 Winter Simulation Conference (Cat. No.01CH37304), pp.201-208, 2001.
DOI : 10.1109/WSC.2001.977267

. Tang, RFID applications in automotive Assembly line equipped with friction drive conveyors, Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design (CSCWD), pp.586-592, 2011.
DOI : 10.1109/CSCWD.2011.5960135

M. Tseng, R. Jiao, and E. C. Wang, Design for mass personalization, CIRP Annals - Manufacturing Technology, vol.59, issue.1, pp.175-178, 2010.
DOI : 10.1016/j.cirp.2010.03.097

. Tu, Agent-Based Control Framework for Mass Customization Manufacturing With UHF RFID Technology, IEEE Systems Journal, vol.3, issue.3, pp.343-359, 2009.
DOI : 10.1109/JSYST.2009.2029663

L. Urwick, Elements of Administration, 1943.

. Bibliographie and . Van-lieshout, RFID Technologies : Emerging issues, challenges and policy options, European Commission Joint Research Centre, Institute for Prospective Technological Studies, 2007.

N. Vandaele-et-de-boeck-vandaele, L. D. Et, and . Boeck, Advanced Resource Planning, Robotics and Computer-Integrated Manufacturing, vol.19, issue.1-2, pp.211-218, 2003.
DOI : 10.1016/S0736-5845(02)00081-9

J. Viñals, L'utilisation des technologies de pointe dans le nouveau contexte de la production manufacturière, 2006.

F. Vinatier, A. Chailleux, P. Duyck, F. Salmon, F. Lescourret et al., Radiotelemetry unravels movements of a walking insect species in??heterogeneous environments, Animal Behaviour, vol.80, issue.2, pp.221-229, 2010.
DOI : 10.1016/j.anbehav.2010.04.022

J. Waldner, Nanocomputers and swarm intelligence, 2008.
DOI : 10.1002/9780470610978

. Wang, RFID Assisted Object Tracking for Automating Manufacturing Assembly Lines, IEEE International Conference on e-Business Engineering (ICEBE'07), pp.48-53, 2007.
DOI : 10.1109/ICEBE.2007.31

. Wang, The simulated impact of RFID-enabled supply chain on pull-based inventory replenishment in TFT-LCD industry, International Journal of Production Economics, vol.112, issue.2, pp.570-586, 2008.
DOI : 10.1016/j.ijpe.2007.05.002

. Wei, Applications of RFID in a SCOR-model driven enterprise production system, 2010 IEEE 17Th International Conference on Industrial Engineering and Engineering Management, pp.501-505, 2010.
DOI : 10.1109/ICIEEM.2010.5646566

. Weining, RFID-based production operation management for multi-varieties and small-batch production, 2010 IEEE International Conference on RFID-Technology and Applications, pp.1-6, 2010.
DOI : 10.1109/RFID-TA.2010.5529849

. Zaharudin, The intelligent product driven supply chain, 2006.