M. Adams, S. Cryan, and A. Mourelatou, Air emission inventory data in europe: new perspectives, 2009.

Y. Alharbi and V. Sick, Investigation of boundary layers in internal combustion engines using a hybrid algorithm of high speed micro-PIV and PTV, Experiments in Fluids, vol.91, issue.4, p.49, 2010.
DOI : 10.1007/s00348-010-0870-8

F. Alizon, Transferts de chaleur convectifs dans la chambre de combustion des moteurs à combustion interne: Influence de l aÃ?rodynamique interne, 2005.

S. An and L. Shao, Diesel engine common rail pressure control based on neuron adaptive PID, Cybernetic and Intelligent Systems, 2008.

C. Angelberger, T. Poinsot, and B. Delhay, Improving near-wall combustion and wall heat transfer modeling in SI engine computation', SAE technical papers series, 1997.

C. Aquino, Transient A/F Control Characteristics of the 5 Liter Central Fuel Injection Engine, SAE Technical Paper Series, 1981.
DOI : 10.4271/810494

A. Balluchi, A. Bicchi, E. Mazzi, S. Vincentelli, A. Serra et al., Hybrid modelling and control of the common rail injection system, International Journal of Control, vol.80, issue.11, pp.1780-1795, 2007.
DOI : 10.1109/5.52200

G. Bara, J. Daafouz, F. Kratz, and J. Ragot, Parameter-dependent state observer design for affine LPV systems, International Journal of Control, vol.74, issue.16, p.74, 2010.
DOI : 10.1016/S0005-1098(99)00193-4

M. Baratta, A. Catania, E. Spessa, and A. Vassallo, Development of an Improved Fractal Model for the Simulation of Turbulent Flame Propagation in SI Engines, SAE Technical Paper Series, 2005.
DOI : 10.4271/2005-24-082

C. Barba and C. Burkhardt, A phenomenological combustion model for heat release rate prediction in hith-speed DI diesel engines with common rail injection, 2000.

R. Bixby, Implementing the Simplex Method: The Initial Basis, ORSA Journal on Computing, vol.4, issue.3, 1992.
DOI : 10.1287/ijoc.4.3.267

R. Blint, The relationship of the laminar flame width to flame speed', Combustion science technology 49, 1986.

P. Blumberg, G. Lavoie, and R. Tabaczynski, Phenomenological models for reciprocating internal combustion engines, Progress in Energy and Combustion Science, pp.313-326, 1980.
DOI : 10.1016/0360-1285(79)90015-7

N. Bordet, C. Caillol, P. Higelin, and V. Talon, A Physical 0D Combustion Model Using Tabulated Chemistry with Presumed Probability Density Function Approach for Multi-Injection Diesel Engines, SAE Technical Paper Series, pp.2010-2011, 2010.
DOI : 10.4271/2010-01-1493
URL : https://hal.archives-ouvertes.fr/hal-00657886

S. Bougrine, S. Richard, and D. Veynante, Modelling and Simulation of the Combustion of Ethanol blended Fuels in a SI Engine using a 0D Coherent Flame Model, SAE Technical Paper Series, 2009.
DOI : 10.4271/2009-24-0016

B. Boust, J. Sotton, M. Bellenoue, and J. Rivere, A Novel Physical Approach for Wall Heat Transfer in Internal Combustion Engines, SAE Technical Paper Series, 2007.
DOI : 10.4271/2007-24-0027
URL : https://hal.archives-ouvertes.fr/hal-00360563

F. Bozza, A. Gimelli, S. Merola, and B. Vaglieco, Validation of a fractal combusition model through flame imaging', Modeling of SI and Diesel Engines, 1120.

F. Bozza, A. Gimelli, L. Strazzullo, E. Torella, and C. Cascone, Steady state and transient operation simulation of a downsized turbocharged SI engine', Modeling of SI and Diesel Engines, 2007.

R. Brecha, Emission scenarios in the face of fossil-fuel peaking', Energy Policy, 2008.

C. Briat, O. Sename, and J. Lafay, Design of LPV observers for LPV time-delay systems: an algebraic approach, International Journal of Control, vol.37, issue.9, pp.1533-1542, 2011.
DOI : 10.1080/00207170210123833
URL : https://hal.archives-ouvertes.fr/hal-00641562

G. Bruneaux, Étude asymptotique, simulation numérique directe et modélisation de l'interaction flamme turbulente prémélangée-paroi, 1996.

Q. Butt and A. Bhatti, Estimation of Gasoline-Engine Parameters Using Higher Order Sliding Mode, IEEE Transactions on Industrial Electronics, vol.55, issue.11, pp.3891-3898, 2008.
DOI : 10.1109/TIE.2008.2005930

N. Cavina, C. Siviero, and R. Suglia, Residual gas fraction estimation: Applicaton to a GDI engine with variable valve timing and EGR', Si Engine Performance and Additives, Gasoline Engine Cold Start and Direct Injection, 2004.

F. Charlette, F. Menevau, and D. Veynante, A power law flame wrinkling model for LES of premixed turbulent combustion, 2010.

W. Chatlatanagulchai and K. Yaovaja, Gain-Scheduling Integrator-Augmented Sliding-Mode Control of Common-Rail Pressure in Diesel-Dual-Fuel Engine, SAE Technical Paper Series, pp.2010-2011, 2010.
DOI : 10.4271/2010-01-1573

O. Colin, A. Benkenida, and A. Angelberger, 3D modeling of mixing, ignition and combustion phenomena in highly stratified gasoline engine', Oil and Gas Science and Technology 58, pp.47-62, 2003.

J. Daafouz, J. Bernoussou, and J. Geromel, On inexact LPV control design of continous time polytopic systems, Transactions on automatic control, vol.53, issue.7, 2008.

A. Di-gaetaai, U. Montanaroa, G. Fiengob, A. Palladinob, and V. Giglioa, A model-based gain scheduling approach for controlling the common-rail system for GDI engines, International Journal of Control, vol.133, issue.4, pp.419-436, 2012.
DOI : 10.1016/j.sysconle.2009.02.004

C. Ferguson and J. Keck, On laminar flame quenching and its application to spark ignition engines, Combustion and Flame, vol.28, 1977.
DOI : 10.1016/0010-2180(77)90025-6

E. Feron, V. Balakrishanan, and S. Boyd, Numerical methdos for H 2 related problems, Proceedings of the 1992 American Control Conference, 1992.

F. Foucher, S. Burnel, and C. Mounaim-rousselle, Evaluation of burning rates in the vicinity of the piston in a spark-ignition engine, Procedings of the combusition institute, pp.751-757, 2002.
DOI : 10.1016/S1540-7489(02)80096-7
URL : https://hal.archives-ouvertes.fr/hal-00618113

F. Foucher and C. Mounaim-rousselle, Fractal approach to the evaluation of burning rates in the vicinity of the piston in a spark-ignition engine, Combustion and Flame, vol.143, issue.3, pp.323-332, 2005.
DOI : 10.1016/j.combustflame.2005.06.007
URL : https://hal.archives-ouvertes.fr/hal-00618119

J. Fox, W. Cheng, and J. Heywood, A Model for Predicting Residual Gas Fraction in Spark-Ignition Engines, SAE Technical Paper Series, 1993.
DOI : 10.4271/931025

C. Gauthier, Commande multivariable de la pression d'injection dans un moteur diesel common rail, 2007.
URL : https://hal.archives-ouvertes.fr/tel-00207875

C. Gauthier, O. Sename, L. Dugard, and G. Meissonnier, $_{\infty}$ Control Design for Diesel Engine Common Rail Injection System, Les Rencontres Scientifiques de l'IFP, 2006.
DOI : 10.2516/ogst:2007046

C. Gauthier, O. Sename, L. Dugard, and G. Meissonnier, An H ? linear parameter-varying (lpv) controller for a diesel engine common rail injection system, European Control Conference, ECC'07, pp.513-522, 2007.

C. Gauthier, O. Sename, L. Dugard, and G. Meissonnier, An LFT approach to H ? control design for diesel engine common rail injection system', Oil and Gas Science and Technology 62, pp.513-522, 2007.

C. Gauthier, O. Sename, L. Dugard, and G. Meissonnier, Some experimental results of a robust H ? linear parameter-varying (lpv) controller applies to a diesel engine common rail injection system, IFAC Advances in Automotive Control, 2007.

B. Gérard, H. Souley, M. Zasadzinski, and M. Darouach, H ? filter for bilinear systems using LPV approach, IEEE Transactions on automatic control, vol.7, 2010.

N. Guerrassi and P. Dupraz, A Common Rail Injection System For High Speed Direct Injection Diesel Engines, SAE Technical Paper Series, 1998.
DOI : 10.4271/980803

L. Gulder, Correlations of laminar combustion data for alternative si engine fuels, SAE, 1984.

L. Gulder, G. Smallwood, R. Wong, D. Snelling, and R. Smith, Flame front surface characteristics in turbulent premixed propane/air combustion, Combustion and Flame, vol.120, issue.4, pp.407-416, 2000.
DOI : 10.1016/S0010-2180(99)00099-1

A. R. Han and . Reitz, A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling, International Journal of Heat and Mass Transfer, vol.40, issue.3, 1997.
DOI : 10.1016/0017-9310(96)00117-2

M. Hart, M. Ziegler, and O. Loffeld, Adaptive estimation of cylinder air mass using the combustion pressure', Electronic engine controls, 1998.

J. Heywood, Engine combustion modeling -an overview', Combustion Modeling in Reciprocating Engines, 1980.

K. Kang and J. Baek, Turbulence characteristics of tumble Ì?flow in a four-valve engine', Experimental Thermal and Fluid Science 18, pp.1231-243, 1998.

G. Karim, R. Raine, and W. Jones, An Examination of Cyclic Variations in a Dual Fuel Engine, SAE Technical Paper Series, 1988.
DOI : 10.4271/881661

J. Keck, Turbulent flame structure and speed in spark-ignition engines, Nineteenth Symposium (International) on Combustion, 1982.
DOI : 10.1016/S0082-0784(82)80322-6

U. Koehler and M. Bargende, A model for a fast prediction of the in-cylinder residual gas mass', SI Engine experiment and modeling, 2004.

F. Lafossas, O. Colin, F. L. Berr, and P. Menegazzi, Application of a New 1D Combustion Model to Gasoline Transient Engine Operation, SAE Technical Paper Series, 2005.
DOI : 10.4271/2005-01-2107

G. Lavoie, J. Heywood, and J. Keck, Experimental and Theoretical Study of Nitric Oxide Formation in Internal Combustion Engines, Combustion Science and Technology, vol.21, issue.4, pp.313-326, 1970.
DOI : 10.1016/0032-0633(67)90038-4

T. Leroy, G. Alix, J. Chauvin, A. Duarchy, and A. L. Berr, Modeling Fresh Air Charge and Residual Gas Fraction on a Dual Independent Variable Valve Timing SI Engine, SAE International Journal of Engines, vol.1, issue.1, 2008.
DOI : 10.4271/2008-01-0983

L. Ljung, System identification, theory for the user, 1999.

J. Mattavi, E. Groff, and F. Lienesch, Engine improvements through combustion modelling', Combustion Modeling in Reciprocating Engines, 1980.

W. Maurice, H. Heemels, J. Daafouz, and G. Millerioux, Observer based control of discrete time LPV systems with uncertain parameters, Transactions on automatic control, vol.55, issue.9, 2010.

M. Metghalchi and J. Keck, Burning velocities of mixtures of air with methanol, isooctane, and indolene at high pressure and temperature', Combustion and flame 48, pp.192-210, 1982.

M. Mladek and C. Onder, A Model for the Estimation of Inducted Air Mass and the Residual Gas Fraction using Cylinder Pressure Measurements, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-0958

K. Nishaiwaki and K. Saijyo, Modeling of flame wall interaciton in SI engine combustion, Proceedings of the 15 Internal Combusiton Engine Symposium (9935158), pp.63-68, 1999.

C. Olalla, R. Leyva, A. Aroudi, and I. Queinnec, Robust LQR Control for PWM Converters: An LMI Approach, IEEE Transactions on Industrial Electronics, vol.56, issue.7, p.56, 2009.
DOI : 10.1109/TIE.2009.2017556

W. Perruquetti, Sliding mode control in engineering, 2002.
DOI : 10.1201/9780203910856

P. Pierce, J. Ghandhi, and J. Martin, Near-Wall Velocity Characteristics in Valved and Ported Motored Engines, SAE Technical Paper Series, 1992.
DOI : 10.4271/920152

S. Poulos and J. Heywood, The effect of chamber geometry on SI engine combustion, 1983.

S. Richard, S. Bougrine, G. Font, F. Lafossas, and F. L. Ber, On the Reduction of a 3D CFD Combustion Model to Build a Physical 0D Model for Simulating Heat Release, Knock and Pollutants in SI Engines, Oil and Gas Sciend and Technology, pp.223-242, 2009.
DOI : 10.2516/ogst/2008055

P. Senecal, J. Xin, and R. Reitz, Predictions of residual gas fraction in IC engines', Modeling and Diagnostics in Diesel Engines, SAE, 1996.

T. Steiner and K. Boulouchos, Near-wall unsteady premixed flame propagation in SI engines, International Congress and Exposition SAE, 1995.

I. Vibe, Semi-empirical expression for combustion rate in engines, Proceedings of Conference on piston engines, pp.186-191, 1956.

M. Weiss, P. Bonnel, R. Hummel, U. Manfredi, R. Colombo et al., Analyzing on-road emissions of light-duty vehicles with portable emission measurement systems (pems), 2011.

G. Woschni, A universally applicable equation for the instantaneus heat transfer coefficient in the interal combustion engine, 1967.

S. Yoshiyama, E. Tomita, Z. Zhang, and Y. Hamamoto, Measurement and Simulation of Turbulent Flame Propagation in a Spark Ignition Engine by Using Fractal Burning Model, SAE Technical Paper Series, 2001.
DOI : 10.4271/2001-01-3603

X. Zhao, R. Matthews, and E. Ellzey, Numerical simulations of combustion in SI engines: Comparison of the fractal flame model to the coherent flame model, International Symposium COMODIA, 1994.