]. X. Bibliographie1, L. Feng, L. Zhongqin, X. Shuhui, and . Weili, Study on the inuences of geometrical parameters on the formability of stretch curved anging by numerical simulation, Journal of Materials Processing Technology, vol.145, issue.1, pp.93-98, 2004.

T. Kumagai and H. Saiki, Deformation analysis of hole flanging with ironing of thick sheet metals, Metals and Materials, vol.10, issue.4, pp.711-714, 1998.
DOI : 10.1007/BF03026385

T. Kumagai, H. Saiki, and Y. Meng, Hole anging with ironing of two-ply thick sheet metals, Journal of Materials Processing Technology, pp.89-9051, 1999.

S. Thipprakmas, M. Jin, and M. Murakawa, Study on anged shapes in neblanked-hole anging process (fb-hole anging process) using nite element method (fem), Journal of Materials Processing Technology, pp.192-193128, 2007.

Y. M. Huang, Hole anging with ironing process of two-ply thick sheet metal. Transactions of Nonferrous Metals Society of China, pp.221-227, 2007.

D. K. Leu, T. C. Chen, and Y. M. Huang, Inuence of punch shapes on the collar-drawing process of sheet steel, Journal of Materials Processing Technology, vol.88, pp.1-3134, 1999.

S. Thipprakmas and W. Phanitwong, Finite element analysis of ange-forming direction in the hole anging process, The International Journal of Advanced Manufacturing Technology, vol.61, p.609620, 2012.

S. C. Tang, Large elasto-plastic strain analysis of flanged hole forming, Computers & Structures, vol.13, issue.1-3, pp.363-370, 1981.
DOI : 10.1016/0045-7949(81)90145-0

Y. M. Huang and K. H. Chien, Influence of the punch profile on the limitation of formability in the hole-flanging process, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.720-724, 2001.
DOI : 10.1016/S0924-0136(01)00597-0

C. L. Li, Y. M. Huang, and Y. W. Tsai, The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal, Journal of Materials Processing Technology, vol.201, issue.1-3, pp.256-260, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.212

Y. M. Huang and K. H. Chien, Inuence of cone semi-angle on the formability limitation of the hole-anging process, The International Journal of Advanced Manufacturing Technology, vol.19, p.597606, 2002.

A. Krichen, A. Kacem, and M. Hbaieb, Blank-holding effect on the hole-flanging process of sheet aluminum alloy, Journal of Materials Processing Technology, vol.211, issue.4, pp.619-626, 2011.
DOI : 10.1016/j.jmatprotec.2010.11.018

I. Suchy, Handbook of die design 2nd edition, 2006.

S. Thiruvarudchelvan and M. J. Tan, Collar drawing using a urethane pad, Journal of Materials Processing Technology, vol.147, issue.1, pp.139-144, 2004.
DOI : 10.1016/j.jmatprotec.2003.12.010

S. Thiruvarudchelvan and M. J. Tan, Investigations into collar drawing using urethane pads, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.87-91, 2007.
DOI : 10.1016/j.jmatprotec.2007.03.046

H. S. Lin, C. Y. Lee, and C. H. Wu, Hole flanging with cold extrusion on sheet metals by FE simulation, International Journal of Machine Tools and Manufacture, vol.47, issue.1, pp.168-174, 2007.
DOI : 10.1016/j.ijmachtools.2006.02.002

H. S. Lin and C. W. Tung, An investigation of cold extruding hollow anged parts from sheet metals, International Journal of Machine Tools and Manufacture, issue.14, pp.472133-2139, 2007.

A. Petek, B. Jurisevic, K. Kuzman, and M. Junkar, Comparison of alternative approaches of single point incremental forming processes, Journal of Materials Processing Technology, vol.209, issue.4, pp.1810-1815, 2009.
DOI : 10.1016/j.jmatprotec.2008.04.033

G. Centeno, M. B. Silva, V. A. Cristino, C. Vallellano, P. A. Martins et al., Hole-anging by incremental sheet forming Application of cnc incremental forming in hole-anging process, International Journal of Machine Tools and Manufacture Chinese Journal of Materials for Mechanical Engineering, vol.21, issue.7, pp.325-333, 2008.

Z. Cui and L. Gao, Studies on hole-flanging process using multistage incremental forming, CIRP Journal of Manufacturing Science and Technology, vol.2, issue.2, pp.124-128, 2010.
DOI : 10.1016/j.cirpj.2010.02.001

D. Hyun, S. Oak, S. Kang, and Y. Moon, Estimation of hole angeability for high strength steel plates, Journal of Materials Processing Technology, pp.130-1319, 2002.

T. C. Chen, An analysis of forming limit in the elliptic hole-anging process of sheet metal, Journal of Materials Processing Technology, pp.192-193373, 2007.

Y. M. Huang and K. H. Chien, The formability limitation of the hole-flanging process, Journal of Materials Processing Technology, vol.117, issue.1-2, pp.43-51, 2001.
DOI : 10.1016/S0924-0136(01)01060-3

S. P. Keeler and W. A. Backofen, Plastic instability and fracture in sheets stretched over rigid punches, Trans. ASM, vol.56, pp.25-48, 1963.

G. M. Goodwin, Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop, SAE Technical Paper Series, 1968.
DOI : 10.4271/680093

R. Arrieux, C. Bedrin, and M. Boivin, Determination of an intrinsic forming limit stress diagram for isotropic metal sheets, Proceedings of the 12th IDDRG congress WG2, pp.61-71, 1982.

N. Asna, On stretch and shrink flanging of sheet aluminium by fluid forming, Journal of Materials Processing Technology, vol.96, issue.1-3, pp.198-214, 1999.
DOI : 10.1016/S0924-0136(99)00352-0

M. J. Worswick and M. J. Finn, The numerical simulation of stretch flange forming, International Journal of Plasticity, vol.16, issue.6, pp.701-720, 2000.
DOI : 10.1016/S0749-6419(99)00069-8

V. Uthaisangsuk, U. Prahl, and W. Bleck, Stress based failure criterion for formability characterisation of metastable steels, Computational Materials Science, vol.39, issue.1, pp.43-48, 2007.
DOI : 10.1016/j.commatsci.2006.01.031

D. K. Leu, Finite-element simulation of hole-anging process of circular sheets of anisotropic materials, International Journal of Mechanical Sciences, vol.38, pp.8-9917, 1996.

S. Oh, C. C. Chen, and S. Kobayashi, Ductile Fracture in Axisymmetric Extrusion and Drawing???Part 2: Workability in Extrusion and Drawing, Journal of Engineering for Industry, vol.101, issue.1, pp.36-44, 1979.
DOI : 10.1115/1.3439471

M. G. Cockroft and D. J. Latham, Ductility and workability of metals, Journal of the institute of metals, vol.96, pp.33-39, 1968.

M. Oyane, T. Sato, K. Okimoto, and S. Shima, Criteria for ductile fracture and their applications, Journal of Mechanical Working Technology, vol.4, issue.1, pp.65-81, 1980.
DOI : 10.1016/0378-3804(80)90006-6

M. Ayada, T. Higashino, and K. Mori, Central bursting in extrusion of inhomogeneous materials, Proceedings of the First ICTP. Adv. Technol. of Plast, vol.1, pp.553-558, 1984.

H. Takuda and N. Hatta, Numerical analysis of formability of a commercially pure zirconium sheet in some sheet forming processes, Materials Science and Engineering: A, vol.242, issue.1-2, pp.15-21, 1998.
DOI : 10.1016/S0921-5093(97)00520-0

H. Takuda, K. Mori, H. Fujimoto, and N. Hatta, Prediction of forming limit in boreexpanding of sheet metals using ductile fracture criterion, Journal of Materials Processing Technology, pp.92-93433, 1999.

Y. Bao, Prediction of ductile crack formation in uncracked bodies (thèse) Massachusetts Institute of Technology, 2003.

Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, International Journal of Mechanical Sciences, vol.46, issue.1, pp.81-98, 2004.
DOI : 10.1016/j.ijmecsci.2004.02.006

M. Giglio, A. Manes, and F. Vigano, Ductile fracture locus of Ti???6Al???4V titanium alloy, International Journal of Mechanical Sciences, vol.54, issue.1, pp.121-135, 2012.
DOI : 10.1016/j.ijmecsci.2011.10.003

K. Chung, N. Ma, T. Park, D. Kim, D. Yoo et al., A modified damage model for advanced high strength steel sheets, International Journal of Plasticity, vol.27, issue.10, pp.1485-1511, 2011.
DOI : 10.1016/j.ijplas.2011.01.007

J. Lemaitre, A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, issue.1, pp.83-89, 1985.
DOI : 10.1115/1.3225775

A. L. Gurson, Continuum theory of ductile rupture by void nucleation and growth : Part i -yield criteria and ow rules for porous ductile media, Journal of Engineering Materials and Technology, Transactions of the ASME, vol.99, issue.2, p.15, 1977.

V. Tvergaard, Influence of voids on shear band instabilities under plane strain conditions, International Journal of Fracture, vol.6, issue.4, pp.389-407, 1981.
DOI : 10.1007/BF00036191

V. Tvergaard, On localization in ductile materials containing spherical voids, International Journal of Fracture, vol.18, pp.237-252, 1982.

J. Lemaitre and J. L. Chaboche, Mécanique des matériaux solides, 2ème édition, 1996.

C. C. Chu and A. Needleman, Void Nucleation Effects in Biaxially Stretched Sheets, Journal of Engineering Materials and Technology, vol.102, issue.3, pp.249-256, 1980.
DOI : 10.1115/1.3224807

H. Badreddine, C. Labergère, K. Saanouni, W. Rajhi, A. Rassineux et al., F.E. elastoplastic damage model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation, International Journal of Material Forming, vol.1, issue.S1, pp.109-112, 2008.
DOI : 10.1007/s12289-008-0032-1
URL : https://hal.archives-ouvertes.fr/hal-00425414

V. Uthaisangsuk, U. Prahl, and W. Bleck, Stretch-flangeability characterisation of multiphase steel using a microstructure based failure modelling, Computational Materials Science, vol.45, issue.3, pp.617-623, 2009.
DOI : 10.1016/j.commatsci.2008.06.024

S. Thuillier and P. Y. Manach, Comparison of the work-hardening of metallic sheets using tensile and shear strain paths, International Journal of Plasticity, vol.25, issue.5, pp.733-751, 2009.
DOI : 10.1016/j.ijplas.2008.07.002
URL : https://hal.archives-ouvertes.fr/hal-00404007

N. M. Wang and M. L. Wenner, An analytical and experimental study of stretch flanging, International Journal of Mechanical Sciences, vol.16, issue.2, pp.135-143, 1974.
DOI : 10.1016/0020-7403(74)90082-4

R. Hill, A theory of the yielding and plastic ow of anisotropic metals, Proceedings of the Royal Society of London May 27. Series A : Mathematical Physical and Engineering Sciences, pp.281-297, 1948.

O. D. Sherby and J. E. Hockett, Large strain deformation of polycrystalline metals at low homologous temperatures, Journal of the Mechanics and Physics of Solids, vol.23, pp.87-98, 1975.

E. Voce, The relationship between stress and strain for homogeneous deformation, Journal of the Institute of Metals, vol.74, pp.537-562, 1948.

A. Kacem, A. Krichen, and P. Y. Manach, Occurrence and eect of ironing in the holeanging process, Journal of Materials Processing Technology, issue.10, pp.2111606-1613, 2011.

H. Soussi, Analyse de la limite de déformation du soyage, 2011.

H. Soussi, H. Ketata, and A. Krichen, Identication de l'endommagement d'une tôle en aluminium soumise à l'expansion, Premier Congrès International Matériaux, 2012.

F. Barlat, D. J. Lege, and J. C. Brem, A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.7, pp.693-712, 1991.
DOI : 10.1016/0749-6419(91)90052-Z

H. L. Yu and D. Y. Jeong, Application of a stress triaxiality dependent fracture criterion in the nite element analysis of unnotched charpy specimens, Theoretical and Applied Fracture Mechanics, pp.54-62, 2010.

M. Luo and T. Wierzbicki, Numerical failure analysis of a stretch-bending test on dualphase steel sheets using a phenomenological fracture model, International Journal of Solids and Structures, vol.47, pp.22-233084, 2010.

D. Mohr and F. Ebnoether, Plasticity and fracture of martensitic boron steel under plane stress conditions, International Journal of Solids and Structures, vol.46, issue.20, pp.3535-3547, 2009.
DOI : 10.1016/j.ijsolstr.2009.05.011
URL : https://hal.archives-ouvertes.fr/hal-00826129

A. Hillerborg, M. Modeer, and P. E. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, pp.773-781, 1976.
DOI : 10.1016/0008-8846(76)90007-7

Y. Li and T. Wierzbicki, Prediction of plane strain fracture of ahss sheets with postinitiation softening, International Journal of Solids and Structures, issue.17, pp.472316-2327, 2010.

M. Dunand and D. Mohr, Hybrid experimental???numerical analysis of basic ductile fracture experiments for sheet metals, International Journal of Solids and Structures, vol.47, issue.9, pp.1130-1143, 2010.
DOI : 10.1016/j.ijsolstr.2009.12.011
URL : https://hal.archives-ouvertes.fr/hal-00620568

Y. Bao and T. Wierzbicki, On the cut-off value of negative triaxiality for fracture, Engineering Fracture Mechanics, vol.72, issue.7, pp.1049-1069, 2005.
DOI : 10.1016/j.engfracmech.2004.07.011

N. Benseddiq, A. Imad, M. Farzin, H. R. Javani, M. Mashayekhi et al., A ductile fracture analysis using a local damage model, International Journal of Pressure Vessels and Piping, vol.85, issue.4, pp.219-2271, 2006.
DOI : 10.1016/j.ijpvp.2007.09.003
URL : https://hal.archives-ouvertes.fr/hal-00273717

Z. Chen and X. Dong, The GTN damage model based on Hill???48 anisotropic yield criterion and its application in sheet metal forming, Computational Materials Science, vol.44, issue.3, pp.1013-1021, 2009.
DOI : 10.1016/j.commatsci.2008.07.020

R. Hambli, Comparison between Lemaitre and Gurson damage models in crack growth simulation during blanking process, International Journal of Mechanical Sciences, vol.43, issue.12, pp.2769-2790, 2001.
DOI : 10.1016/S0020-7403(01)00070-4

M. Rachik, J. M. Roelandt, and A. Maillard, Some phenomenological and computational aspects of sheet metal blanking simulation, Journal of Materials Processing Technology, vol.128, issue.1-3, pp.1-3256, 2002.
DOI : 10.1016/S0924-0136(02)00460-0

K. C. Liao, Applications of anisotropic yield criteria to porous sheet metal forming simulations, Materials & Design, vol.29, issue.5, pp.1000-1010, 2008.
DOI : 10.1016/j.matdes.2007.03.025

H. Marouani, A. B. Ismail, E. Hug, and M. Rachik, Numerical investigations on sheet metal blanking with high speed deformation, Materials & Design, vol.30, issue.9, pp.3566-3571, 2009.
DOI : 10.1016/j.matdes.2009.02.028

K. Nahshon and J. W. Hutchinson, Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2008.
DOI : 10.1016/j.euromechsol.2007.08.002

K. L. Nielsen and V. Tvergaard, Failure by void coalescence in metallic materials containing primary and secondary voids subject to intense shearing, International Journal of Solids and Structures, vol.48, issue.9, pp.1255-1267, 2011.
DOI : 10.1016/j.ijsolstr.2011.01.008