. Grace, DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, pp.225-277, 1982.
DOI : 10.1002/aic.690150512

R. A. De-bruijn, P. Sarazin, and B. D. Favis, Deformation and break-up of drops in simple shear flows Influence of temperature-induced coalescence effects on co-continuous morphology in poly, Polymer, issue.16, pp.46-5966, 1989.

B. D. Favis, The effect of processing parameters on the morphology of an immiscible binary blend, Journal of Applied Polymer Science, vol.39, issue.2, pp.285-300, 1990.
DOI : 10.1002/app.1990.070390207

U. Sundararaj and C. W. Macosko, Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization, Macromolecules, vol.28, issue.8, pp.28-2647, 1995.
DOI : 10.1021/ma00112a009

N. Grizzuti and O. Bifulco, Effects of coalescence and breakup on the steady-state morphology of an immiscible polymer blend in shear flow, Rheologica Acta, vol.27, issue.49, pp.406-415, 1997.
DOI : 10.1007/BF00396327

I. Fortelny and J. Kovar, Theory of coalescence in immiscible polymer blends, Polymer Composites, vol.132, issue.2, pp.119-124, 1988.
DOI : 10.1002/pc.750090204

A. K. Chesters, The modeling of coalescence processes in fluid liquid dispersions -A review of current understanding, Chemical Engineering Research & Design, vol.69, issue.4, pp.259-270, 1991.

J. J. Elmendorp and A. K. Vandervegt, A study on polymer blending microrheology: Part IV. The influence of coalescence on blend morphology origination, Polymer Engineering and Science, vol.47, issue.19, pp.26-1332, 1986.
DOI : 10.1002/pen.760261908

J. M. Janssen and H. E. Meijer, Dynamics of liquid-liquid mixing: A 2-zone model, Polymer Engineering and Science, vol.67, issue.22, pp.35-1766, 1995.
DOI : 10.1002/pen.760352206

I. Vinckier, P. Moldenaers, A. M. Terracciano, and N. Grizzuti, Droplet size evolution during coalescence in semiconcentrated model blends, AIChE Journal, vol.40, issue.4, pp.951-958, 1998.
DOI : 10.1002/aic.690440421

T. K. Kallel, Etude de mélanges PE/PS, contribution au recyclage, Thèse de Doctorat de l'Institut National des Sciences Appliquées de Lyon, 2003.

D. R. Paul and J. W. Barlow, Polymer blends (or alloys), Journal of Macromolecular Science- Reviews in Macromolecular Chemistry and Physics, issue.1, pp.18-109, 1980.

J. K. Lee and C. D. Han, Evolution of polymer blend morphology during compounding in an internal mixer, Polymer, vol.40, issue.23, pp.40-6277, 1999.
DOI : 10.1016/S0032-3861(99)00022-1

J. K. Lee and C. D. Han, Evolution of polymer blend morphology during compounding in a twin-screw extruder, Polymer, vol.41, issue.5, pp.41-1799, 2000.
DOI : 10.1016/S0032-3861(99)00325-0

J. S. He, W. S. Bu, and J. J. Zeng, Co-phase continuity in immiscible binary polymer blends, Polymer, vol.38, issue.26, pp.38-6347, 1997.
DOI : 10.1016/S0032-3861(97)00212-7

W. S. Bu and J. S. He, The effect of mixing time on the morphology of immiscible polymer blends, Journal of Applied Polymer Science, vol.62, issue.9, pp.1445-1456, 1996.
DOI : 10.1002/(SICI)1097-4628(19961128)62:9<1445::AID-APP14>3.0.CO;2-Y

L. A. Utracki and Z. H. Shi, Development of polymer blend morphology during compounding in a twin-screw extruder. Part I: Droplet dispersion and coalescence?a review, Polymer Engineering and Science, vol.33, issue.49, pp.32-1824, 1992.
DOI : 10.1002/pen.760322405

J. M. Janssen and H. E. Meijer, Droplet breakup mechanisms: Stepwise equilibrium versus transient dispersion, Journal of Rheology, vol.37, issue.4, pp.597-608, 1993.
DOI : 10.1122/1.550385
URL : http://repository.tue.nl/709901

H. Vanoene, Modes of dispersion of viscoelastic fluids in flow, Journal of Colloid and Interface Science, vol.40, issue.3, pp.448-467, 1972.
DOI : 10.1016/0021-9797(72)90355-4

D. Bourry and B. D. Favis, Co-continuity and phase inversion in HDPE/PS blends: Influence of interfacial modification and elasticity, Journal of Polymer Science Part A: Polymer Chemistry, issue.11, pp.36-1889, 1998.

R. C. Willemse, A. Posthuma-de-boer, J. Van-dam, and A. D. Gotsis, Co-continuous morphologies in polymer blends: the influence of the interfacial tension, Polymer, vol.40, issue.4, pp.827-834, 1999.
DOI : 10.1016/S0032-3861(98)00307-3

R. C. Willemse, A. P. De-boer, J. Van-dam, and A. D. Gotsis, Co-continuous morphologies in polymer blends: a new model, Polymer, vol.39, issue.24, pp.39-5879, 1998.
DOI : 10.1016/S0032-3861(97)10200-2

C. Marco, G. Ellis, M. A. Gómez, J. G. Fatou, J. M. Arribas et al., Rheological properties, crystallization, and morphology of compatibilized blends of isotactic polypropylene and polyamide, Journal of Applied Polymer Science, vol.65, issue.13, pp.65-2665, 1997.
DOI : 10.1002/(SICI)1097-4628(19970926)65:13<2665::AID-APP8>3.0.CO;2-9

F. Abbassi-sourki, M. A. Huneault, and M. Bousmina, Effect of compatibilization on the deformation and breakup of drops in step-wise increasing shear flow, Polymer, vol.50, issue.2, pp.645-653, 2009.
DOI : 10.1016/j.polymer.2008.11.027

R. Holstimiettinen, J. Seppala, and O. T. Ikkala, Effects of compatibilizers on the properties of Polyamide Polypropylene blends, Polymer Engineering and Science, issue.13, pp.32-868, 1992.

A. Gnatowski and J. Koszkul, Investigations of the influence of compatibilizer and filler type on the properties of chosen polymer blends, Journal of Materials Processing Technology, vol.162, issue.163, pp.162-163, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.240

P. Van-puyvelde, S. Velankar, and P. Moldenaers, Rheology and morphology of compatibilized polymer blends, Current Opinion in Colloid & Interface Science, vol.6, issue.5-6, pp.5-6, 2001.
DOI : 10.1016/S1359-0294(01)00113-3

L. Zhang, C. Wan, and Y. Zhang, Morphology and electrical properties of polyamide 6/polypropylene/multi-walled carbon nanotubes composites, Composites Science and Technology, vol.69, issue.13, pp.69-2212, 2009.
DOI : 10.1016/j.compscitech.2009.06.005

L. Elias, F. Fenouillot, J. C. Majeste, and P. Cassagnau, Morphology and rheology of immiscible polymer blends filled with silica nanoparticles, Polymer, vol.48, issue.20, pp.48-6029, 2007.
DOI : 10.1016/j.polymer.2007.07.061
URL : https://hal.archives-ouvertes.fr/hal-00372813

S. Hom, A. R. Bhattacharyya, R. A. Khare, A. R. Kulkarni, M. Saroop et al., PP/ABS blends with carbon black: Morphology and electrical properties, Journal of Applied Polymer Science, vol.46, issue.2, pp.998-1004, 2009.
DOI : 10.1002/app.29543

S. Hom, A. R. Bhattacharyya, R. A. Khare, A. R. Kulkarni, M. Saroop et al., Blends of polypropylene and ethylene octene comonomer with conducting fillers: Influence of state of dispersion of conducting fillers on electrical conductivity, Polymer Engineering & Science, vol.37, issue.8, pp.49-1502, 2009.
DOI : 10.1002/pen.21383

G. Geuskens, E. Dekezel, S. Blacher, and F. Brouers, The electrical conductivity of polymer blends filled with carbon-black, European Polymer Journal, vol.23, issue.12, pp.27-1261, 1991.
DOI : 10.1016/0014-3057(87)90047-4

O. Breuer, R. Tchoudakov, M. Narkis, and A. Siegmann, Segregated structures in carbon black-containing immiscible polymer blends: HIPS/LLDPE systems, Journal of Applied Polymer Science, vol.64, issue.6, pp.1097-1106, 1997.
DOI : 10.1002/(SICI)1097-4628(19970509)64:6<1097::AID-APP9>3.0.CO;2-G

F. Gubbels, S. Blacher, E. Vanlathem, R. Jerome, R. Deltour et al., Design of Electrical Conductive Composites -Key Role of the Morphology on the Electrical-Properties of Carbon-Black Filled Polymer Blends, Macromolecules, issue.5, pp.28-1559, 1995.

G. Z. Wu, B. P. Li, and J. D. Jiang, Carbon black self-networking induced co-continuity of immiscible polymer blends, Polymer, vol.51, issue.9, pp.51-2077, 2010.
DOI : 10.1016/j.polymer.2010.03.007

P. Potschke, A. R. Bhattacharyya, and A. Janke, Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene, Carbon, vol.42, issue.5-6, pp.5-6, 2004.
DOI : 10.1016/j.carbon.2003.12.001

P. Potschke, A. R. Bhattacharyya, and A. Janke, Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate, Polymer, vol.44, issue.26, pp.44-8061, 2003.
DOI : 10.1016/j.polymer.2003.10.003

H. Zou, K. Wang, Q. Zhang, and Q. Fu, A change of phase morphology in poly(p-phenylene sulfide)/polyamide 66??blends induced by adding multi-walled carbon nanotubes, Polymer, vol.47, issue.22, pp.47-7821, 2006.
DOI : 10.1016/j.polymer.2006.09.008

X. X. Cai, B. P. Li, Y. Pan, and G. Z. Wu, Morphology evolution of immiscible polymer blends as directed by nanoparticle self-agglomeration, Polymer, vol.53, issue.1, pp.259-266, 2012.
DOI : 10.1016/j.polymer.2011.11.032

F. Gubbels, R. Jerome, E. Vanlathem, R. Deltour, S. Blacher et al., Kinetic and Thermodynamic Control of the Selective Localization of Carbon Black at the Interface of Immiscible Polymer Blends, Chemistry of Materials, vol.10, issue.5, pp.10-1227, 1998.
DOI : 10.1021/cm970594d

Y. J. Li and H. Shimizu, Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites, Polymer, vol.45, issue.22, pp.45-7381, 2004.
DOI : 10.1016/j.polymer.2004.09.018

W. J. Liu, Y. J. Huang, D. S. Wu, L. Q. Gao, Q. Yang et al., INFLUENCE OF NANO SILICA ON THE CO-CONTINUITY INTERVAL OF PMMA/PS BLENDS, Acta Polymerica Sinica, vol.009, issue.6, pp.553-559, 2009.
DOI : 10.3724/SP.J.1105.2009.00553

J. N. Coleman, U. Khan, and Y. K. Gun-'ko, Mechanical Reinforcement of Polymers Using Carbon Nanotubes, Advanced Materials, vol.36, issue.6, pp.689-706, 2006.
DOI : 10.1002/adma.200501851

J. N. Coleman, U. Khan, W. J. Blau, and Y. K. Gun-'ko, Small but strong: A review of the mechanical properties of carbon nanotube???polymer composites, Carbon, vol.44, issue.9, pp.44-1624, 2006.
DOI : 10.1016/j.carbon.2006.02.038

S. S. Ray, S. Pouliot, M. Bousmina, and L. A. Utracki, Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends, Polymer, issue.25, pp.45-8403, 2004.

M. U. Wahit, A. Hassan, A. R. Rahmat, and J. W. Lim, Effect of Organoclay and Ethylene-Octene Copolymer Inclusion on the Morphology and Mechanical Properties of Polyamide/Polypropylene Blends, Journal of Reinforced Plastics and Composites, vol.25, issue.9, pp.25-933, 2006.
DOI : 10.1177/0731684406063529

D. Benderly, A. Siegmann, and M. Narkis, Preferential distribution of glass particles in reinforced polypropylene/polyamide immiscible blends, Journal of Materials Science Letters, vol.28, issue.2, pp.132-134, 1995.
DOI : 10.1007/BF00456567

D. Benderly, A. Siegmann, and M. Narkis, STRUCTURE AND BEHAVIOR OF MULTICOMPONENT IMMISCIBLE POLYMER BLENDS, Journal of Polymer Engineering, vol.17, issue.6, pp.17-461, 1997.
DOI : 10.1515/POLYENG.1997.17.6.461

J. C. Huang, Carbon black filled conducting polymers and polymer blends Advances in Polymer Technology, pp.299-313, 2002.

A. E. Zaikin, E. A. Zharinova, and R. S. Bikmullin, Specifics of localization of carbon black at the interface between polymeric phases, Polymer Science Series A, vol.49, issue.3, pp.328-336, 2007.
DOI : 10.1134/S0965545X07030145

R. Tchoudakov, O. Breuer, M. Narkis, and A. Siegmann, Conductive polymer blends with low carbon black loading: Polypropylene/polyamide, Polymer Engineering & Science, vol.214, issue.43, pp.36-1336, 1996.
DOI : 10.1002/pen.10528

D. Stauffer, Introduction to percolation theoryS, Percolation and conduction. Reviews of Modern Physics, pp.574-588, 1973.

M. Sumita, K. Sakata, S. Asai, K. Miyasaka, and H. Nakagawa, Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black, Polymer Bulletin, vol.62, issue.7, pp.25-265, 1991.
DOI : 10.1007/BF00310802

M. Sumita, K. Sakata, Y. Hayakawa, S. Asai, K. Miyasaka et al., Double percolation effect on the electrical conductivity of conductive particles filled polymer blends, Colloid & Polymer Science, vol.62, issue.2, pp.134-139, 1992.
DOI : 10.1007/BF00652179

M. H. Al-saleh and U. Sundararaj, An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blends, Composites Part A: Applied Science and Manufacturing, vol.39, issue.2, pp.284-293, 2008.
DOI : 10.1016/j.compositesa.2007.10.010

S. Bose, A. R. Bhattacharyya, A. R. Kulkarni, and P. Pötschke, Electrical, rheological and morphological studies in co-continuous blends of polyamide 6 and acrylonitrile???butadiene???styrene with multiwall carbon nanotubes prepared by melt blending, Composites Science and Technology, vol.69, issue.3-4, pp.69-72, 2009.
DOI : 10.1016/j.compscitech.2008.10.024

F. Gubbels, R. Jerome, P. Teyssie, E. Vanlathem, R. Deltour et al., Selective Localization of Carbon Black in Immiscible Polymer Blends: A Useful Tool To Design Electrical Conductive Composites, Macromolecules, vol.27, issue.7, pp.27-1972, 1994.
DOI : 10.1021/ma00085a049

R. A. Khare, A. R. Bhattacharyya, A. R. Kulkarni, M. Sarp, and A. Biswas, Influence of multiwall carbon nanotubes on morphology and electrical conductivity of PP/ABS blends, Journal of Polymer Science Part B: Polymer Physics, vol.57, issue.21, pp.46-2286, 2008.
DOI : 10.1002/polb.21560

Z. B. Xu, C. Zhao, A. J. Gu, and F. , Electric conductivity of PS/PA6/carbon black composites, Journal of Applied Polymer Science, vol.27, issue.2, pp.1042-1047, 2007.
DOI : 10.1002/app.25300

L. Cui, Y. Zhang, Y. Zhang, X. Zhang, and W. Zhou, Electrical properties and conductive mechanisms of immiscible polypropylene/Novolac blends filled with carbon black, European Polymer Journal, vol.43, issue.12, pp.43-5097, 2007.
DOI : 10.1016/j.eurpolymj.2007.08.023

S. Bose, C. Ozdilek, J. Leys, J. W. Seo, M. Wubbenhorst et al., Phase Separation as a Tool to Control Dispersion of Multiwall Carbon Nanotubes in Polymeric Blends, ACS Applied Materials & Interfaces, vol.2, issue.3, pp.800-807, 2010.
DOI : 10.1021/am9008067

C. Calberg, S. Blacher, F. Gubbels, F. Brouers, R. Deltour et al., Electrical and dielectric properties of carbon black filled co-continuous two-phase polymer blends, Journal of Physics D: Applied Physics, vol.32, issue.13, pp.32-1517, 1999.
DOI : 10.1088/0022-3727/32/13/313

D. P. Dharaiya, S. C. Jana, and S. F. Lyuksyutov, Production of electrically conductive networks in immiscible polymer blends by chaotic mixing, Polymer Engineering & Science, vol.43, issue.1, pp.19-28, 2006.
DOI : 10.1002/pen.20445

H. Garmabi and S. Naficy, Developing electrically conductive polypropylene/polyamide6/carbon black composites with microfibrillar morphology, Journal of Applied Polymer Science, vol.39, issue.5, pp.3461-3467, 2007.
DOI : 10.1002/app.26835

B. G. Soares, F. Gubbels, R. Jerome, P. Teyssie, E. Vanlathem et al., Electrical conductivity in carbon black-loaded polystyrene-polyisoprene blends. Selective localization of carbon black at the interface, Polymer Bulletin, vol.27, issue.61, pp.223-228, 1995.
DOI : 10.1007/BF00312918

. Cabot, A. Thielen, B. Valange, and S. Viering, Conductive polymer blends with finely divided conductive material selectively localized in continuous polymer phase or continuous interface, 1998.

P. Vilkman, T. Mustonen, J. Minkkinen, H. Karttunen, and M. , Crosslinked conducting polymer composite materials and method of making same. brevet WO 00 Polymer blend and method of preparing same, 1998.

B. P. Binks, Particles as surfactants???similarities and differences, Current Opinion in Colloid & Interface Science, vol.7, issue.1-2, pp.21-41, 2002.
DOI : 10.1016/S1359-0294(02)00008-0

B. P. Binks and J. H. Clint, Solid Wettability from Surface Energy Components: Relevance to Pickering Emulsions, Langmuir, vol.18, issue.4, pp.1270-1273, 2002.
DOI : 10.1021/la011420k

R. Aveyard, B. P. Binks, C. , and J. H. , Emulsions stabilised solely by colloidal particles, Advances in Colloid and Interface Science, vol.100, issue.102, pp.100-102, 2003.
DOI : 10.1016/S0001-8686(02)00069-6

A. Baudouin, C. Bailly, and J. Devaux, Interface localization of carbon nanotubes in blends of two copolymers, Polymer Degradation and Stability, vol.95, issue.3, pp.95-389, 2010.
DOI : 10.1016/j.polymdegradstab.2009.11.007

A. Baudouin, J. Devaux, and C. Bailly, Localization of carbon nanotubes at the interface in blends of polyamide and ethylene???acrylate copolymer, Polymer, vol.51, issue.6, pp.51-1341, 2010.
DOI : 10.1016/j.polymer.2010.01.050

A. Baudouin, D. Auhl, F. Tao, J. Devaux, and C. Bailly, Polymer blend emulsion stabilization using carbon nanotubes interfacial confinement, Polymer, vol.52, issue.1, pp.149-156, 2011.
DOI : 10.1016/j.polymer.2010.11.004

J. Vermant, G. Cioccolo, K. G. Nair, and P. Moldenaers, Coalescence suppression in model immiscible polymer blends by nano-sized colloidal particles, Rheologica Acta, vol.228, issue.5, pp.43-529, 2004.
DOI : 10.1007/s00397-004-0381-8

L. Elias, F. Fenouillot, J. C. Majesté, P. Alcouffe, and P. Cassagnau, Immiscible polymer blends stabilized with nano-silica particles: Rheology and effective interfacial tension, Polymer, vol.49, issue.20, pp.49-4378, 2008.
DOI : 10.1016/j.polymer.2008.07.018
URL : https://hal.archives-ouvertes.fr/hal-00373860

J. R. Austin and M. Kontopoulou, Effect of organoclay content on the rheology, morphology, and physical properties of polyolefin elastomers and their blends with polypropylene, Polymer Engineering & Science, vol.201, issue.11, pp.46-1491, 2006.
DOI : 10.1002/pen.20622

M. Gahleitner, B. Kretzschmar, D. Pospiech, E. Ingolic, N. Reichelt et al., Morphology and mechanical properties of polypropylene/polyamide 6 nanocomposites prepared by a two-step melt-compounding process, Journal of Applied Polymer Science, vol.93, issue.1, pp.283-291, 2006.
DOI : 10.1002/app.23102

D. Voulgaris and D. Petridis, Emulsifying effect of dimethyldioctadecylammonium-hectorite in polystyrene/poly(ethyl methacrylate) blends. Polymer, pp.43-2213, 2002.

S. S. Ray and M. Bousmina, Effect of organic modification on the compatibilization efficiency of clay in an immiscible polymer blend, Macromolecular Rapid Communications, issue.20, pp.26-1639, 2005.

S. S. Ray, M. Bousmina, and A. Maazouz, Morphology and properties of organoclay modified polycarbonate/poly(methyl methacrylate) blend, Polymer Engineering & Science, vol.14, issue.8, pp.46-1121, 2006.
DOI : 10.1002/pen.20598

J. Huitric, J. Ville, P. Mederic, M. Moan, A. et al., Rheological, morphological and structural properties of PE/PA/nanoclay ternary blends: Effect of clay weight fraction, Journal of Rheology, vol.53, issue.5, pp.53-1101, 2009.
DOI : 10.1122/1.3153551

F. Fenouillot, P. Cassagnau, and J. C. Majesté, Uneven distribution of nanoparticles in immiscible fluids: Morphology development in polymer blends, Polymer, vol.50, issue.6, pp.50-1333, 2009.
DOI : 10.1016/j.polymer.2008.12.029
URL : https://hal.archives-ouvertes.fr/hal-00453736

J. S. Hong, H. Namkung, K. H. Ahn, S. J. Lee, K. et al., The role of organically modified layered silicate in the breakup and coalescence of droplets in PBT/PE blends, Polymer, vol.47, issue.11, pp.47-3967, 2006.
DOI : 10.1016/j.polymer.2006.03.077

I. Kelnar, V. Khunova, J. Kotek, and L. Kapralkova, Effect of clay treatment on structure and mechanical behavior of elastomer-containing polyamide 6 nanocomposite. Polymer, pp.48-5332, 2007.

L. Elias, F. Fenouillot, J. C. Majeste, G. Martin, and P. Cassagnau, Migration of nanosilica particles in polymer blends, Journal of Polymer Science Part B: Polymer Physics, vol.15, issue.109, pp.46-1976, 2008.
DOI : 10.1002/polb.21534
URL : https://hal.archives-ouvertes.fr/hal-00373896

A. Goldel, G. Kasaliwal, and P. Potschke, Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene-acrylonitrile), Macromolecular Rapid Communications, vol.92, issue.6, pp.30-423, 2009.
DOI : 10.1002/marc.200800549

A. Goldel, A. Marmur, G. R. Kasaliwal, P. Potschke, H. et al., Shape-Dependent Localization of Carbon Nanotubes and Carbon Black in an Immiscible Polymer Blend during Melt Mixing, Macromolecules, vol.44, issue.15, pp.44-6094, 2011.
DOI : 10.1021/ma200793a

A. Goldel, G. R. Kasaliwal, P. Pötschke, H. , and G. , The kinetics of CNT transfer between immiscible blend phases during melt mixing, Polymer, vol.53, issue.2, pp.2012-53
DOI : 10.1016/j.polymer.2011.11.039

J. Ville, P. Mederic, J. Huitric, A. , and T. , Structural and rheological investigation of interphase in polyethylene/polyamide/nanoclay ternary blends, Polymer, vol.53, issue.8, pp.2012-53
DOI : 10.1016/j.polymer.2012.02.040
URL : https://hal.archives-ouvertes.fr/hal-00714723

R. Ibarra-gomez, A. Marquez, L. Valle, and O. S. Rodriguez-fernandez, Influence of the Blend Viscosity and Interface Energies on the Preferential Location of CB and Conductivity of BR/EPDM Blends, Rubber Chemistry and Technology, vol.76, issue.4, pp.76-969, 2003.
DOI : 10.5254/1.3547785

A. L. Persson and H. Bertilsson, Viscosity difference as distributing factor in selective absorption of aluminium borate whiskers in immiscible polymer blends, Polymer, vol.39, issue.23, pp.39-5633, 1998.
DOI : 10.1016/S0032-3861(98)00096-2

J. Y. Feng, C. M. Chan, L. , and J. X. , A method to control the dispersion of carbon black in an immiscible polymer blend, Polymer Engineering & Science, vol.14, issue.5, pp.43-1058, 2003.
DOI : 10.1002/pen.10089

P. Zhou, W. Yu, C. X. Zhou, F. Liu, L. M. Hou et al., Morphology and electrical properties of carbon black filled LLDPE/EMA composites, Journal of Applied Polymer Science, vol.41, issue.1, pp.487-492, 2007.
DOI : 10.1002/app.25020

J. Clarke, B. Clarke, P. K. Freakley, S. , and I. , Compatibilising effect of carbon black on morphology of NR???NBR blends, Plastics, Rubber and Composites, vol.38, issue.1, pp.39-44, 2001.
DOI : 10.5254/1.3534954

V. References, L. Elias, F. Fenouillot, J. C. Majeste, and P. Cassagnau, Morphology and rheology of immiscible polymer blends filled with silica nanoparticles, Polymer, issue.120, pp.48-6029, 2007.

M. Sumita, K. Sakata, S. Asai, K. Miyasaka, H. Nakagawa et al., Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black, Double percolation effect on the electrical conductivity of conductive particles filled polymer blends. Colloid and Polymer Science, pp.265-134, 1991.
DOI : 10.1007/BF00310802

A. Cayla, C. Campagne, M. Rochery, and E. Devaux, Electrical, rheological properties and morphologies of biphasic blends filled with carbon nanotubes in one of the two phases, Synthetic Metals, vol.161, issue.11-12, pp.161-172, 2011.
DOI : 10.1016/j.synthmet.2011.03.012

A. Katada, Y. F. Buys, Y. Tominaga, S. Asai, and M. Sumita, Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-co-vinyl acetate)/poly (L-lactic acid) blend. Colloid and Polymer Science, pp.284-134, 2005.

G. Stokes, On the Effect of the Internal Friction of Fluids on the Motion of Pendulums, Transactions, vol.1851, issue.98, p.287
DOI : 10.1017/CBO9780511702266.002

S. P. Nagarkar and S. S. Velankar, Morphology and rheology of ternary fluid???fluid???solid systems, Soft Matter, vol.331, issue.32, pp.8464-8477, 2012.
DOI : 10.1039/c2sm25758k

V. R. Sumita, M. Sakata, K. Asai, S. Miyasaka, K. Nakagawa et al., Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black, Double percolation effect on the electrical conductivity of conductive particles filled polymer blends. Colloid and Polymer Science, pp.265-134, 1991.
DOI : 10.1007/BF00310802

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Viscosity-induced CBfillers localisation in immiscible PP/PCL blends, Chapitre, vol.3, pp.79-102

M. Rubinstein and R. Colby, Polymer Physics Polymer Physics, pp.110-113, 2003.

I. Results and .. , 134 II.1. Mixing procedure 2 (blend first), p.134

V. Ray, S. S. Pouliot, S. Bousmina, M. Utracki, and L. A. , Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends, Polymer, issue.25, pp.45-8403, 2004.

J. Vermant, S. Vandebril, C. Dewitte, and P. Moldenaers, Particle-stabilized polymer blends, Rheologica Acta, vol.19, issue.1, pp.47-835, 2008.
DOI : 10.1007/s00397-008-0285-0

M. Sumita, K. Sakata, S. Asai, K. Miyasaka, H. Nakagawa et al., Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black Electrical, rheological properties and morphologies of biphasic blends filled with carbon nanotubes in one of the two phases, Polym. Bull. Synthetic Metals, vol.25, issue.2, pp.265-16111, 1991.

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Viscosity-induced CBfillers localisation in immiscible PP/PCL blends, Chapitre, vol.3, pp.79-102

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Influence of processing conditions on CB-fillers localization in immiscible PP/PCL blends, Chapitre, vol.4, pp.103-128

W. F. Verhelst, K. G. Wolthuis, A. Voet, P. Ehrburger, and J. B. Donnet, The Role of Morphology and Structure of Carbon Blacks in the Electrical Conductance of Vulcanizates, Rubber Chemistry and Technology, vol.50, issue.4, pp.735-746, 1977.
DOI : 10.5254/1.3535171

A. Vaxman, Resistivity behavior of filled electrically conductive crosslinked polyethylene, Journal of Applied Polymer Science, vol.29, issue.5, pp.1639-1652, 1984.

S. Asai, K. Sakata, M. Sumita, and K. Miyasaka, Effect of Interfacial Free Energy on the Heterogeneous Distribution of Oxidized Carbon Black in Polymer Blends., Polymer Journal, vol.13, issue.12, pp.415-420, 1992.
DOI : 10.1295/polymj.24.415

L. G. Leal, Interfacial activity of polymer-coated gold nanoparticles, Langmuir, vol.23, issue.25, pp.12497-12502, 2007.

G. Stokes, On the Effect of the Internal Friction of Fluids on the Motion of Pendulums, Transactions, vol.1851, issue.98, pp.287-293
DOI : 10.1017/CBO9780511702266.002

I. Results and .. , 158 II.1. Droplet scale study of particle migration, p.161

V. Elias, L. Fenouillot, F. Majeste, J. C. Martin, G. Cassagnau et al., Migration of nanosilica particles in polymer blends, Journal of Polymer Science Part B: Polymer Physics, vol.15, issue.109, pp.46-1976, 2008.
DOI : 10.1002/polb.21534
URL : https://hal.archives-ouvertes.fr/hal-00373896

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Influence of processing conditions on CB-fillers localization in immiscible PP/PCL blends, Chapitre, vol.4, pp.103-128

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Influence of CB-fillers particle size on their localization in immiscible PP/PCL blends, Chapitre, vol.5, pp.129-152

L. G. Leal, Interfacial activity of polymer-coated gold nanoparticles, Langmuir, vol.23, issue.25, pp.12497-12502, 2007.

M. Boufarguine, F. Renou, T. Nicolai, and L. Benyahia, Droplet deformation of a strongly shear thinning dense suspension of polymeric micelles, Rheologica Acta, vol.540, issue.6, pp.49-647, 2010.
DOI : 10.1007/s00397-009-0424-2

L. Becu and L. Benyahia, Strain-Induced Droplet Retraction Memory in a Pickering Emulsion, Langmuir, vol.25, issue.12, pp.6678-6682, 2009.
DOI : 10.1021/la9006235

I. Results and .. , 173 II.1. CB-fillers percolation in single polymers, p.173

V. R. Zhang, W. Dehghani-sanij, A. A. Blackburn, and R. S. , Carbon based conductive polymer composites, Journal of Materials Science, vol.56, issue.10, pp.42-3408, 2007.
DOI : 10.1007/s10853-007-1688-5

O. Meincke, D. Kaempfer, H. Weickmann, C. Friedrich, M. Vathauer et al., Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene, Polymer, vol.45, issue.3, pp.45-739, 2004.
DOI : 10.1016/j.polymer.2003.12.013

M. Narkis, G. Lidor, A. Vaxman, and L. Zuri, New injection moldable electrostatic dissipative (ESD) composites based on very low carbon black loadings, Journal of Electrostatics, vol.47, issue.4, pp.201-214, 1999.
DOI : 10.1016/S0304-3886(99)00041-8

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Influence of CB-fillers particle size on their localization in immiscible PP/PCL blends, Chapitre, vol.5, pp.129-152

J. Sanchez-gonzalez, A. Macias-garcia, M. F. Alexandre-franco, and V. Gomez-serrano, Electrical conductivity of carbon blacks under compression, Carbon, vol.43, issue.4, pp.741-747, 2005.
DOI : 10.1016/j.carbon.2004.10.045

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Influence of processing conditions on CB-fillers localization in immiscible PP/PCL blends, Chapitre, vol.4, pp.103-128

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. And-tassin, Viscosity-induced CBfillers localisation in immiscible PP/PCL blends, Chapitre, vol.3, pp.79-102