116 4.3.2.1 Description de différents schémas d'optimisation . . 116 4.3.2.2 Formulation retenue ,
Using Tolerance-Maps to Generate Frequency Distributions of Clearance and Allocate Tolerances for Pin-Hole Assemblies, Journal of Computing and Information Science in Engineering, vol.7, issue.4, pp.347-359, 2007. ,
DOI : 10.1115/1.2795308
Lartigue : On neural networks' ability to approximate geometrical variation propagation in assembly, 12th CIRP Conference on Computer Aided Tolerancing, pp.26-44, 2012. ,
Calcul statistique des chaînes de cotes avec des distributions hétérogènes non indépendantes, Conception et Production Intégrées : CPI, 2003. (Cité en, p.37 ,
Estimation of small failure probabilities in high dimensions by subset simulation, Probabilistic Engineering Mechanics, vol.16, issue.4, pp.263-277, 2001. ,
DOI : 10.1016/S0266-8920(01)00019-4
Geometrical reliability of overconstrained mechanisms with gaps, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.159-162, 2008. ,
DOI : 10.1016/j.cirp.2008.03.038
Dantan : Statistical tolerance analysis of over-constrained mechanisms using system reliability methods, Computer Aided Design, Under review, pp.2013-83 ,
Dantan : Statistical tolerance analysis of a hyperstatic mechanism, using system reliability methods, Computers and Industrial Engineering, pp.2012-83 ,
Reliabilitybased optimization of design variance to identify critical tolerances Advances Engineering Software, pp.305-311, 2009. ,
Statistical tolerancing as it relates to quality control and the designer, SAE transactions, vol.77, pp.1965-1971, 1968. ,
An adaptive algorithm to build up sparse polynomial chaos expansions for stochastic finite element analysis, Probabilistic Engineering Mechanics, vol.25, issue.2, pp.183-197 ,
DOI : 10.1016/j.probengmech.2009.10.003
A new uncertainty importance measure. Reliability Engineering and System Safety, pp.771-784, 2007. ,
The concept of the small displacement torsor in metrology Advanced Mathematical Tools in Metrology II, Series Advances in Mathematics for Applied Sciences, pp.110-122, 1996. ,
Spécification géométrique des produits. Cotation et tolérancement ISO, Dunod/Industries et Technologies, 2007. ,
Assessing small failure probabilities by combined subset simulation and Support Vector Machines, Structural Safety, vol.33, issue.6, pp.343-353 ,
DOI : 10.1016/j.strusafe.2011.06.001
A fast and efficient response surface approach for structural reliability problems, Structural Safety, vol.7, issue.1, pp.57-66, 1990. ,
DOI : 10.1016/0167-4730(90)90012-E
Des savoirs en action Contributions de la recherche en gestion . l'Harmattan, 1995. ,
How to Perform Statistical Tolerance Analysis Asqc Basic References in Quality Control : Statistical Techniques, 1986. ,
Tolerance synthesis: quantifier notion and virtual boundary, Computer-Aided Design, vol.37, issue.2, pp.231-240, 2005. ,
DOI : 10.1016/j.cad.2004.06.008
Worst-case and statistical tolerance analysis based on quantified constraint satisfaction problems and Monte Carlo simulation, Computer-Aided Design, vol.41, issue.1, pp.1-12, 2009. ,
DOI : 10.1016/j.cad.2008.11.003
Cumulative formation of response surface and its use in reliability analysis, Probabilistic Engineering Mechanics, vol.15, issue.4, pp.309-315, 2000. ,
DOI : 10.1016/S0266-8920(99)00030-2
Structural Reliability under Incomplete Probability Information, Journal of Engineering Mechanics, vol.112, issue.1, pp.85-104, 1986. ,
DOI : 10.1061/(ASCE)0733-9399(1986)112:1(85)
Statistical tolerancing using a modification of taguchi's method, Technometrics, vol.30, issue.4, pp.397-405, 1988. ,
Modeling three dimensional tolerance zones using screw parameters, 25th design automation conference, 1999. ,
Directional simulation in Gaussian processes, Probabilistic Engineering Mechanics, vol.3, issue.4, pp.207-217, 1988. ,
DOI : 10.1016/0266-8920(88)90013-6
Structural Reliability Methods, pp.14-16, 1996. ,
Unified Uncertainty Analysis by the First Order Reliability Method, Journal of Mechanical Design, vol.130, issue.9, 2008. ,
DOI : 10.1115/1.2943295
AK-MCS: An active learning reliability method combining Kriging and Monte Carlo Simulation, Structural Safety, vol.33, issue.2, pp.145-154 ,
DOI : 10.1016/j.strusafe.2011.01.002
Statistical tolerancing : The state of the art. part ii. methods for estimating moments, Journal of Quality Technology, vol.7, issue.32, pp.1-12, 1975. ,
APTA: advanced probability-based tolerance analysis of products, M??canique & Industries, vol.12, issue.2, pp.71-85 ,
DOI : 10.1051/meca/2011014
The apta method for the tolerance analysis of products -comparison of capability-based tolerance and inertial tolerance, Asian International Journal of Science and Technology in Production and Manufacturing EngineeringAIJSTPME), vol.4, issue.3, pp.24-36 ,
CQ2RS: a new statistical approach to the response surface method for reliability analysis, Structural Safety, vol.25, issue.1, pp.99-121, 2003. ,
DOI : 10.1016/S0167-4730(02)00045-0
Numerical Computation of Multivariate Normal Probabilities, Journal of Computational and Graphical Statistics, vol.1, issue.2, pp.141-149, 1992. ,
DOI : 10.1007/978-1-4613-9655-0
Stochastic Finite Elements : A Spectral Approach, 1991. ,
DOI : 10.1007/978-1-4612-3094-6
Synthesis and statistical analysis for three-dimensional tolerancing, CAT2009 11th CIRP International conferance on Computer Aided Tolerancing, 2009. ,
Product Life-Cycle Management. Geometric Variations, 2010. ,
Chase : A second-order method for assembly tolerance analysis, Proceedings of the ASME Design Engineering Technical Conferences, pp.21-44, 1999. ,
FIVE WAYS STATISTICAL TOLERANCING CAN FAIL, AND WHAT TO DO ABOUT THEM, Quality Engineering, vol.121, issue.1, pp.85-93, 2000. ,
DOI : 10.1080/08982119708919150
Chase : A new tolerance analysis method for designers and manufacturers. Transaction of the ASME, pp.112-116, 1987. ,
Exact and invariant second-moment code format, Journal of the Engineering Mechanics, vol.100, issue.1, pp.111-121, 1974. ,
An examination of methods for approximating implicit limit state functions from the viewpoint of statistical learning theory, Structural Safety, vol.26, issue.3, pp.271-293, 2004. ,
DOI : 10.1016/j.strusafe.2003.05.002
Revue sur l'analyse de sensibilité globale de modèles numériques, Journal de la Société Françiase de Statistique, 2010. ,
Contributions à l'analyse de sensibilité et à l'analyse discriminante généralisée, Thèse de doctorat, 2005. ,
Reliability analysis of a sheet metal forming process using Monte Carlo analysis and metamodels, Journal of Materials Processing Technology, vol.202, issue.1-3, pp.255-268, 2008. ,
DOI : 10.1016/j.jmatprotec.2007.09.005
Computer-aided tolerance synthesis with statistical method and optimization techniques Quality and reliability engineering international, pp.131-139, 2001. ,
DOI : 10.1002/qre.387
Circuit design optimization based on quality cost estimayion, Quality and Reliability Engineering International, vol.21, pp.365-386, 2005. ,
Tables to facilitate fitting SU frequency curves, Biometrika, vol.52, issue.3-4, pp.547-558, 1965. ,
DOI : 10.1093/biomet/52.3-4.547
Table of percentage points of pearson purves, for ? ? 1 and ? 2 expressed in standard measure, Biometrika, vol.50, issue.3, p.459, 1963. ,
Fitting Statistical Distributions : The Generalized Lambda Distribution and Generalized Bootstrap Methods, 2000. ,
DOI : 10.1201/9781420038040
THE USE OF RESPONSE SURFACE DESIGNS IN THE SELECTION OF OPTIMUM TOLERANCE ALLOCATION, Quality Engineering, vol.31, issue.1, p.116, 2000. ,
DOI : 10.1115/1.2831121
Tolerances: Their Analysis and Synthesis, Journal of Engineering for Industry, vol.112, issue.2, pp.113-121, 1990. ,
DOI : 10.1115/1.2899553
Structural Reliability, pp.11-16, 2009. ,
DOI : 10.1002/9780470611708
Methodology for evaluating statistical tolerancing strategies, 11th CIRP Conference on Computer Aided Tolerancing, 2009. ,
A Generic Method for the Worst Case and Statistical Tridimensional Tolerancing Analysis, 12th CIRP Conference on Computer Aided Tolerancing, pp.34-44, 2012. ,
DOI : 10.1016/j.procir.2013.08.042
Tolérancement géométrique des produits, Hermès, Lavoisier, 2007. ,
Radial Importance Sampling for Structural Reliability, Journal of Engineering Mechanics, vol.116, issue.1, pp.189-203, 1990. ,
DOI : 10.1061/(ASCE)0733-9399(1990)116:1(189)
Détermination des distributions dont les marges sont données Comptes Randus de l'Académie des Sciences, pp.42-43, 1962. ,
Review of statistical approaches to tolerance analysis, Computer-Aided Design, vol.27, issue.1, pp.6-15, 1995. ,
DOI : 10.1016/0010-4485(95)90748-5
Inertial tolerancing. The Total Quality Management Magazine, pp.202-209, 2004. ,
DOI : 10.1108/09544780410532918
URL : https://hal.archives-ouvertes.fr/hal-00372594
Algorithms and Consistent Approximations, pp.120-143, 1997. ,
A statistical tolerance analysis approach for over-constrained mechanism based on optimization and Monte Carlo simulation, Computer-Aided Design, vol.44, issue.2, pp.132-142 ,
DOI : 10.1016/j.cad.2011.10.004
Sensitivity Analysis in Practice : A Guide to Assessing Scientific Models, 2004. ,
DOI : 10.1002/0470870958
Optimal mean and tolerance allocation using conformance-based design. Quality and Reliability Engineering International, pp.445-472, 2006. ,
DOI : 10.1002/qre.721
Tolerance Stack Analysis Methods, pp.37-38, 1995. ,
Using monte-carlo variance reduction in statistical tolerance synthesis, Computer-Aided Design, vol.29, issue.120, pp.63-69, 1997. ,
Sensitivity estimates for nonlinear mathematical models, Mathematical Modelling and Computational Experiments, vol.1, pp.407-414, 1993. ,
Concept for the integration of manufacturing simulations into tolerance analysisoperations on polytopes : application to tolerance analysis, 112th CIRP Conference on Computer Aided Tolerancing, 2009. ,
Comparison of finite element reliability methods, Probabilistic Engineering Mechanics, vol.17, issue.4, pp.337-348, 2002. ,
DOI : 10.1016/S0266-8920(02)00031-0
Continuous Taguchi???a model-based approach to Taguchi's ???quality by design??? with arbitrary distributions, Quality and Reliability Engineering International, vol.14, issue.1, pp.29-41, 1998. ,
DOI : 10.1002/(SICI)1099-1638(199801/02)14:1<29::AID-QRE144>3.0.CO;2-A
Introduction to Quality Engineering Unipub : White Plains, 1989. ,
Algorithm to calculate the Minkowski sums of 3-polytopes based on normal fans, Computer-Aided Design, vol.43, issue.12, pp.1567-1576 ,
DOI : 10.1016/j.cad.2011.06.016
URL : https://hal.archives-ouvertes.fr/hal-00635842
Operations on polytopes: application to tolerance analysis, CAT1999 6th CIRP International conferance on Computer Aided Tolerancing, 1999. ,
DOI : 10.1007/978-94-017-1705-2_43
URL : https://hal.archives-ouvertes.fr/hal-00604749
Application of Structural Systems Reliability Theory, 1986. ,
DOI : 10.1007/978-3-642-82764-8
A Mathematical Framework for the Key Characteristic Process, Research in Engineering Design, vol.11, issue.3, pp.145-157, 1999. ,
DOI : 10.1007/s001630050011
Improved algorithm for tolerance allocation based on Monte Carlo simulation and discrete optimization, Computers & Industrial Engineering, vol.56, issue.4, pp.1402-1413, 2009. ,
DOI : 10.1016/j.cie.2008.09.005
Reliability-based robust design optimization: A multi-objective framework using hybrid quality loss function, Quality and Reliability Engineering International, vol.22, issue.1, pp.27-41, 2010. ,
DOI : 10.1080/08982110902762626
Two improved algorithms for reliability analysis éditeurs : Reliability and optimization of structural systems, Proceedings of the 6th IFIP WG7.5 Working Conference on reliability and optimization of structural systems, 1995. ,
A gap-based approach to capture fitting conditions for mechanical assembly, Computer-Aided Design, vol.36, issue.8, pp.691-700, 2004. ,
DOI : 10.1016/S0010-4485(03)00156-8