J. Wang, M. Inoue, Y. Amara, and D. Howe, Cogging-force-reduction techniques for linear permanent-magnet machines, IEE Proceedings -Electric Power Applications, pp.731-738, 2005.
DOI : 10.1049/ip-epa:20045254

D. [. Wang, Y. Howe, and . Amara, Armature reaction field and inductances of tubular modular permanent magnet machines, Journal of Applied Physics, vol.97, issue.10, 2005.
DOI : 10.1063/1.1852324

[. Amara, J. Wang, and D. Howe, Stator Iron Loss of Tubular Permanent-Magnet Machines, IEEE Transactions on Industry Applications, vol.41, issue.4, pp.989-995, 2005.
DOI : 10.1109/TIA.2005.851047

[. Amara, E. Hoang, M. Gabsi, M. Lécrivain, and S. Allano, Design and comparison of different flux-switch synchronous machines for an aircraft oil breather application, European Transactions on Electrical Power, vol.36, issue.6, pp.497-511, 2005.
DOI : 10.1002/etep.85

[. Amara, J. Wang, and D. Howe, Analytical Prediction of Eddy-Current Loss in Modular Tubular Permanent-Magnet Machines, IEEE Transactions on Energy Conversion, vol.20, issue.4, pp.761-770, 2005.
DOI : 10.1109/TEC.2005.853732

[. Amara, A. H. Ahmed, E. Hoang, L. Vido, M. Gabsi et al., Hybrid Excitation Synchronous Alternator Connected to a Diode Rectifier with a Resistive Load, EPE Journal, vol.16, issue.2, pp.29-36, 2006.
DOI : 10.1080/09398368.2006.11463617

Y. [. Vido, E. Amara, M. Hoang, F. Gabsi, M. Chabot et al., Design and Comparison of Concentrated Windings and Distributed Windings Interior PM Machines for a Hybrid Vehicle Application, International Journal of Electrical Engineering in Transportation (IJEET), vol.2, pp.1-9, 2006.

[. Amara, M. Gabsi, L. Vido, H. B. Ahmed, and M. Lécrivain, Machines synchrones ?? double excitation. Principes et structures, Revue internationale de g??nie ??lectrique, vol.10, issue.1-2, pp.151-188, 2007.
DOI : 10.3166/rige.10.151-188

E. Hoang, Y. Amara, M. Gabsi, S. Allano, and J. Y. Routex, Entraînement électrique d'un déshuileur aéronautique. Utilisation d'une machine à commutation de flux '' Revue internationale de, Génie Électrique (RIGE), vol.10, pp.3-4, 2007.

L. [. Hlioui, Y. Vido, M. Amara, A. Gabsi, M. Miraoui et al., Magnetic equivalent circuit model of a hybrid excitation synchronous machine, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol.27, issue.5, pp.1000-1015, 2008.
DOI : 10.1108/03321640810890735

[. Amara, M. Gabsi, L. Vido, A. H. Ahmed, E. Hoang et al., Classification des alternateurs d??bitant sur un pont ?? diodes connect?? ?? un bus continu. Caract??ristique du d??bit maximal, European Journal of Electrical Engineering, vol.13, issue.1, pp.33-89, 2010.
DOI : 10.3166/ejee.13.33-89

Y. Amara, L. Vido, M. Gabsi, A. H. Ahmed, and M. Lécrivain, Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion, IEEE Transactions on Vehicular Technology, vol.58, issue.5, pp.2137-2149, 2009.
DOI : 10.1109/TVT.2008.2009306

Y. [. Bellara, G. Amara, B. Barakat, and . Dakyo, Two-Dimensional Exact Analytical Solution of Armature Reaction Field in Slotted Surface Mounted PM Radial Flux Synchronous Machines, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4534-4538, 2009.
DOI : 10.1109/TMAG.2009.2021527

[. Amara, P. Reghem, and G. Barakat, Analytical Prediction of Eddy-Current Loss in Armature Windings of Permanent Magnet Brushless AC Machines, IEEE Transactions on Magnetics, vol.46, issue.8, pp.3481-3484, 2010.
DOI : 10.1109/TMAG.2010.2046885

Y. [. Bali, G. Amara, R. Barakat, M. Ibtiouen, and . Gabsi, Analytical Modeling of Open Circuit Magnetic Field in Wound Field and Series Double Excitation Synchronous Machines, IEEE Transactions on Magnetics, vol.46, issue.10, pp.3802-3815, 2010.
DOI : 10.1109/TMAG.2010.2053039

[. Amara and G. Barakat, Analytical Modeling of Magnetic Field in Surface Mounted Permanent-Magnet Tubular Linear Machines, IEEE Transactions on Magnetics, vol.46, issue.11, pp.3870-3884, 2010.
DOI : 10.1109/TMAG.2010.2053850

[. Amara, G. Barakat, and P. Reghem, Armature Reaction Magnetic Field of Tubular Linear Surface-Inset Permanent-Magnet Machines, IEEE Transactions on Magnetics, vol.47, issue.4, pp.805-811, 2011.
DOI : 10.1109/TMAG.2011.2104971

S. [. Nedjar, Y. Hlioui, L. Amara, M. Vido, M. Gabsi et al., A New Parallel Double Excitation Synchronous Machine, IEEE Transactions on Magnetics, vol.47, issue.9, pp.2252-2260, 2011.
DOI : 10.1109/TMAG.2011.2134864

H. [. Bellara, R. Bali, Y. Belfkira, G. Amara, and . Barakat, Analytical Prediction of Open-Circuit Eddy-Current Loss in Series Double Excitation Synchronous Machines, IEEE Transactions on Magnetics, vol.47, issue.9, pp.2261-2268, 2011.
DOI : 10.1109/TMAG.2011.2138710

[. Amara, S. Hlioui, R. Belfkira, G. Barakat, and M. Gabsi, Comparison of Open Circuit Flux Control Capability of a Series Double Excitation Machine and a Parallel Double Excitation Machine, IEEE Transactions on Vehicular Technology, vol.60, issue.9, pp.4194-4207, 2011.
DOI : 10.1109/TVT.2011.2173704

M. [. Vido, Y. Ruellan, M. Amara, H. B. Gabsi, and . Ahmed, Recherche des param??tres optimaux d???une machine synchrone ?? aimants permanents, European Journal of Electrical Engineering, vol.14, issue.2-3, pp.2-3, 2011.
DOI : 10.3166/ejee.14.135-163

Y. [. Bellara, G. Amara, and . Barakat, Mod??lisation analytique des machines lin??aires ?? entrefers plans ?? aimants permanents mont??s en surface, European Journal of Electrical Engineering, vol.14, issue.2-3, pp.2-3, 2011.
DOI : 10.3166/ejee.14.287-307

A. [. Tiegna, Y. Bellara, G. Amara, and . Barakat, Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots, IEEE Transactions on Magnetics, vol.48, issue.3, pp.1212-1226, 2012.
DOI : 10.1109/TMAG.2011.2171979

Y. [. Barakat and . Amara, Analytical Modeling of Flat and Tubular Linear PM Machines with Surface-Mounted Magnets and Semi-Closed Slots, IEEJ Journal of Industry Applications, vol.1, issue.2, pp.78-88, 2012.
DOI : 10.1541/ieejjia.1.78

B. L. Revues, Y. Vido, E. Amara, M. Hoang, F. Gabsi et al., Apport des machines synchrones à double excitation pour la traction automobile : application aux véhicules électriques ou hybrides, pp.25-32

C. Revue-À-diffusion-limitée-[-rdl1-]-m, Y. Gabsi, L. Amara, F. Vido, F. Guillemard et al., Actionneurs et servo-commandes embarqués '' Recherche, Revue trimestrielle du Réseau Écrin, vol.50, pp.16-19, 2003.

Y. Amara, J. Lucidarme, M. Gabsi, M. Lécrivain, A. H. Ahmed et al., A New Topology of Hybrid Synchronous Machine, Proceedings IEEE IAS'2000, pp.451-456, 2000.

[. Amara, E. Hoang, M. Gabsi, M. Lécrivain, A. H. Ahmed et al., 3D Finite Elements Analysis of a Hybrid Synchronous Machine, Proceedings ELECTROMOTION, vol.2, pp.385-390, 2001.

Y. Amara, K. Oujehani, E. Hoang, M. Gabsi, M. Lécrivain et al., Flux weakening of hybrid synchronous machines, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485), pp.367-373, 2001.
DOI : 10.1109/IEMDC.2001.939327

[. Amara, E. Hoang, M. Gabsi, M. Lécrivain, A. H. Ahmed et al., Measured Performances of a New Hybrid Excitation Synchronous Machine, CD Proceedings EPE'2001, 2001.
DOI : 10.1080/09398368.2002.11463517

Y. Amara, E. Hoang, M. Gabsi, M. Lécrivain, and S. Allano, Design and comparison of different flux-switch synchronous machines for an aircraft oil breather application, CD Proceedings of second IEEE International Conference on Signals, Systems and Information Technology, SSD 2003, 2003.
DOI : 10.1002/etep.85

[. Amara, H. B. Ahmed, E. Hoang, L. Vido, M. Gabsi et al., Hybrid Excitation Synchronous Alternator Debiting on a Diode Rectifier with a Resistive Load, Proceedings EPE 2003, pp.90-75815, 2003.

Y. [. Vido, E. Amara, M. Hoang, H. B. Gabsi, M. Ahmed et al., Efficiency of alternators debiting on a diode bridge with a constant-voltage load, Proceedings ELECTROMOTION, vol.1, pp.311-316, 2003.

[. Amara, M. Gabsi, H. B. Ahmed, E. Hoang, and M. Lécrivain, Classification of three-phase synchronous alternators associated to a diode rectifier with a constant-voltage load, Proceedings ELECTROMOTION, vol.1, pp.286-291, 2003.

M. [. Wang, Y. Inoué, D. Amara, and . Howe, Minimisation of cogging force in linear permanent magnet machines '' Proceedings of Eighteenth International Workshop on High Performance Magnets and their Applications HPMA, pp.377-384, 2004.

Y. [. Vido, E. Amara, M. Hoang, F. Gabsi, M. Chabot et al., Design and Comparison of Concentrated Windings and Distributed Windings Interior PM Machines for a Hybrid Vehicle Application, CD Proceedings of 16th International Conference on Electrical Machines ICEM2004, pp.12-345678, 2004.

[. Amara, J. B. Wang, and D. Howe, Eddy current loss in tubular modular permanent magnet machines, CD Proceedings of 16th International Conference on Electrical Machines ICEM2004, pp.12-345678, 2004.

[. Amara, J. B. Wang, and D. Howe, Stator iron loss of tubular permanent magnet machines, Proceedings IEEE IAS, vol.3, pp.2119-2124, 2004.

Y. [. Vido, M. Amara, M. Gabsi, F. Lécrivain, and . Chabot, Hybrid excitation synchronous machines for electric and hybrid vehicles traction, CD Proceedings (Sensors & Actuators for Advanced automotive Applications) SENSACT 2005, 2005.

Y. [. Vido, M. Amara, M. Gabsi, F. Lécrivain, and . Chabot, Compared performances of homopolar and bipolar hybrid excitation synchronous machines, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005., pp.1555-1560, 2005.
DOI : 10.1109/IAS.2005.1518652

M. [. Vido, M. Gabsi, Y. Lécrivain, F. Amara, and . Chabot, Homopolar and bipolar hybrid excitation synchronous machines, IEEE International Conference on Electric Machines and Drives, 2005., pp.1212-1218, 2005.
DOI : 10.1109/IEMDC.2005.195876

[. Amara, L. Vido, M. Gabsi, E. Hoang, M. Lécrivain et al., Machines synchrones à double excitation : une solution prometteuse pour les applications aux véhicules automobiles, Proceedings (Vers des Ingénieries & des Technologies Communes aux Transports terrestres, maritimes, aériens et spatiaux) ITCT 2006, 2006.

Y. Amara, L. Vido, M. Gabsi, M. Lécrivain, and F. Chabot, Hybrid Excitation Synchronous Machines: Energy Efficient Solution for Vehicle Propulsion, Proceedings IEEE Vehicle Power and Propulsion Conference, pp.6-8, 2006.

S. [. Bekhaled, L. Hlioui, M. Vido, M. Gabsi, Y. Lécrivain et al., 3D Magnetic Equivalent Circuit Model for Homopolar Hybrid Excitation Synchronous Machines '' Proccedings of ACEMP -Electromotion, pp.10-12, 2007.

L. [. Hlioui, Y. Vido, M. Amara, A. Gabsi, M. Miraoui et al., Design of a synchronous machine with concentric stator windings and permanent magnets in focusing configuration '' Proccedings of ACEMP -Electromotion, pp.10-12, 2007.

L. [. Hlioui, Y. Vido, M. Amara, A. Gabsi, M. Miraoui et al., Magnetic equivalent circuit model of a hybrid excitation synchronous machine, CD Proceedings of fourth IEEE International Multi-Conference on Systems, Signals and Devices, pp.978-9973, 2007.
DOI : 10.1108/03321640810890735

L. [. Hlioui, Y. Vido, M. Amara, M. Gabsi, A. Lécrivain et al., PM and hybrid excitation synchronous machines: Performances comparison, 2008 18th International Conference on Electrical Machines, pp.978-979, 2008.
DOI : 10.1109/ICELMACH.2008.4799854

Y. [. Hlioui, L. Amara, M. Vido, M. Gabsi, A. Lécrivain et al., Finite elements analysis of a new double excitation synchronous machine, CD Proceedings of 13 th IEEE Conference on Electromagnetic Field Computation, 2008.

Y. [. Bellara, G. Amara, B. Barakat, and . Dakyo, 2D exact analytical solution of armature reaction field in slotted surface mounted PM radial flux synchronous machines, Proceedings of IEEE International Magnetics Conference, 2009.

H. Bali, A. Bellara, G. Barakat, Y. Amara, and R. Ibtiouen, 2D exact analytical solution of magnetic field, on load, in slotted surface mounted PM radial flux synchronous machines: Coupling with electric circuit equations, Proceedings of ISEF 2009, 2009.

[. Amara, P. Reghem, and G. Barakat, Analytical Prediction of Eddy-Current Loss in Armature Windings of Permanent Magnet Brushless AC Machines, CD Proceedings of 17 th International Conference on the Computation of Electromagnetic Fields, 2009.
DOI : 10.1109/TMAG.2010.2046885

[. Amara, J. Raharijaona, and G. Barakat, 2D exact analytical solution of open circuit magnetic field in slotted surface mounted PM radial flux synchronous machines, CD Proceedings of 17 th International Conference on the Computation of Electromagnetic Fields, 2009.

S. [. Nedjar, L. Hlioui, M. Vido, Y. Gabsi, A. Amara et al., Magnetic equivalent circuit coupled to finite element analysis for flux focusing PM machine modeling, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation, 2010.
DOI : 10.1109/CEFC.2010.5481309

B. Nedjar, S. Hlioui, L. Vido, M. Gabsi, Y. Amara et al., Permanent magnet synchronous machine design for hybrid traction applications: Impact of magnetic laminations materials, 2010 IEEE International Symposium on Industrial Electronics, pp.1426-1431, 2010.
DOI : 10.1109/ISIE.2010.5637839

B. Nedjar, S. Hlioui, L. Vido, M. Gabsi, Y. Amara et al., Permanent magnet synchronous machine design for hybrid traction applications: Impact of magnetic laminations materials, 2010 IEEE International Symposium on Industrial Electronics, pp.1426-1431, 2010.
DOI : 10.1109/ISIE.2010.5637839

Y. [. Bellara, G. Amara, P. Barakat, and . Reghem, Analytical modelling of the magnetic field in axial flux permanent magnet machines with semi-closed slots at no-load, CD Proceedings of 19 th International Conference on Electrical Machines, ICEM 2010, pp.978-979, 2010.

S. [. Nedjar, L. Hlioui, Y. Vido, M. Amara, A. Gabsi et al., Magnetic Equivalent Circuit applied to a unipolar PMSM, The XIX International Conference on Electrical Machines, ICEM 2010, pp.978-979, 2010.
DOI : 10.1109/ICELMACH.2010.5607954

F. Dubas and C. Espanet, Analytical Solution of the Magnetic Field in Permanent-Magnet Motors Taking Into Account Slotting Effect: No-Load Vector Potential and Flux Density Calculation, IEEE Transactions on Magnetics, vol.45, issue.5, pp.2097-2109, 2009.
DOI : 10.1109/TMAG.2009.2013245

URL : https://hal.archives-ouvertes.fr/hal-00467151

B. L. Gysen, K. J. Meessen, J. J. Paulides, and E. A. Lomonova, General Formulation of the Electromagnetic Field Distribution in Machines and Devices Using Fourier Analysis, IEEE Transactions on Magnetics, vol.46, issue.1, pp.39-52, 2010.
DOI : 10.1109/TMAG.2009.2027598

Z. Q. Zhu, L. J. Wu, and Z. P. Xia, An Accurate Subdomain Model for Magnetic Field Computation in Slotted Surface-Mounted Permanent-Magnet Machines, IEEE Transactions on Magnetics, vol.46, issue.4, pp.1100-1115, 2010.
DOI : 10.1109/TMAG.2009.2038153

N. Boules, Design optimization of permanent magnet DC motors, IEEE Transactions on Industry Applications, vol.26, issue.4, pp.786-792, 1990.
DOI : 10.1109/28.56006

N. Boules, Two-Dimensional Field Analysis of Cylindrical Machines with Permanent Magnet Excitation, IEEE Transactions on Industry Applications, vol.20, issue.5, pp.1267-1277, 1984.
DOI : 10.1109/TIA.1984.4504593

B. Ackermann and R. Sottek, Analytische Modellierung der Einrastmomente in permanentmagneterregten Motoren, Electrical Engineering, vol.115, issue.2, pp.117-125, 1995.
DOI : 10.1007/BF01245643

Y. Amara and G. Barakat, Analytical Modeling of Magnetic Field in Surface Mounted Permanent-Magnet Tubular Linear Machines, IEEE Transactions on Magnetics, vol.46, issue.11, pp.3870-3884, 2010.
DOI : 10.1109/TMAG.2010.2053850

J. Azzouzi, G. Barakat, and B. Dakyo, Quasi-3-D Analytical Modeling of the Magnetic Field of an Axial Flux Permanent-Magnet Synchronous Machine, IEEE Transactions on Energy Conversion, vol.20, issue.4, pp.746-752, 2005.
DOI : 10.1109/TEC.2005.845538

H. Bali, Y. Amara, G. Barakat, R. Ibtiouen, and M. Gabsi, Analytical Modeling of Open Circuit Magnetic Field in Wound Field and Series Double Excitation Synchronous Machines, IEEE Transactions on Magnetics, vol.46, issue.10, pp.3802-3815, 2010.
DOI : 10.1109/TMAG.2010.2053039

H. Bali, A. Bellara, G. Barakat, Y. Amara, and R. Ibtiouen, On load 2D exact analytical solution of magnetic field in slotted surface mounted PM radial flux synchronous machines: coupling with electric circuit equations, Studies in Applied Electromagnetics and Mechanics, pp.260-269, 2010.

G. Barakat and Y. Amara, Analytical Modeling of Flat and Tubular Linear PM Machines with Surface-Mounted Magnets and Semi-Closed Slots, IEEJ Journal of Industry Applications, vol.1, issue.2, pp.78-88, 2012.
DOI : 10.1541/ieejjia.1.78

A. Bellara, Y. Amara, G. Barakat, and B. Dakyo, Two-Dimensional Exact Analytical Solution of Armature Reaction Field in Slotted Surface Mounted PM Radial Flux Synchronous Machines, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4534-4538, 2009.
DOI : 10.1109/TMAG.2009.2021527

A. Bellara, Y. Amara, G. Barakat, and P. Reghem, Analytical modelling of the magnetic field in axial flux permanent magnet machines with semi-closed slots at no load, Int. Conf. Electrical Machines, pp.1-6, 2010.

N. Bianchi, Analytical field computation of a tubular permanent-magnet linear motor, IEEE Transactions on Magnetics, vol.36, issue.5, pp.3798-3801, 2000.
DOI : 10.1109/20.908373

K. Boughrara, D. Zarko, R. Ibtiouen, O. Touhami, and A. Rezzoug, Magnetic Field Analysis of Inset and Surface-Mounted Permanent-Magnet Synchronous Motors Using Schwarz–Christoffel Transformation, IEEE Transactions on Magnetics, vol.45, issue.8, pp.3166-3178, 2009.
DOI : 10.1109/TMAG.2009.2016559

N. Boules, Prediction of No-Load Flux Density Distribution in Permanent Magnet Machines, IEEE Transactions on Industry Applications, vol.21, issue.3, pp.633-643, 1985.
DOI : 10.1109/TIA.1985.349720

O. De-la-barrière, S. Hlioui, H. B. Ahmed, M. Gabsi, and M. Lobue, Three-Dimensional Analytical Modeling of a Permanent-Magnet Linear Actuator With Circular Magnets, IEEE Transactions on Magnetics, vol.46, issue.9, pp.46-3608, 2010.
DOI : 10.1109/TMAG.2010.2045507

E. P. Furlani and M. A. Knewtson, A three-dimensional field solution for permanent-magnet axial-field motors, IEEE Transactions on Magnetics, vol.33, issue.3, pp.2322-2325, 1997.
DOI : 10.1109/20.573849

B. L. Gysen, E. A. Lomonova, J. J. Paulides, and A. J. Vandenput, Analytical and Numerical Techniques for Solving Laplace and Poisson Equations in a Tubular Permanent-Magnet Actuator: Part I. Semi-Analytical Framework, IEEE Transactions on Magnetics, vol.44, issue.7, pp.1751-1759, 2008.
DOI : 10.1109/TMAG.2008.922416

B. L. Gysen, E. Ilhan, K. J. Meessen, J. J. Paulides, and E. A. Lomonova, Modeling of Flux Switching Permanent Magnet Machines With Fourier Analysis, IEEE Transactions on Magnetics, vol.46, issue.6, pp.1499-1502, 2010.
DOI : 10.1109/TMAG.2009.2039921

E. Ilhan, B. L. Gysen, J. J. Paulides, and E. A. Lomonova, Analytical Hybrid Model for Flux Switching Permanent Magnet Machines, IEEE Transactions on Magnetics, vol.46, issue.6, pp.1762-1765, 2010.
DOI : 10.1109/TMAG.2010.2042579

H. G. Ittstein, Analytical calculation of the cogging torques of a two-pole permanent-magnet-excited dc motor, Archiv f??r Elektrotechnik, vol.10, issue.4, pp.283-292, 1992.
DOI : 10.1007/BF01579756

L. Jian, K. T. Chau, Y. Gong, C. Yu, and W. Li, Analytical Calculation of Magnetic Field in Surface-Inset Permanent Magnet Motors, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4688-4691, 2009.
DOI : 10.1109/TMAG.2009.2024891

P. Kumar and P. Bauer, Improved Analytical Model of a Permanent-Magnet Brushless DC Motor, IEEE Transactions on Magnetics, vol.44, issue.10, pp.2299-2309, 2008.
DOI : 10.1109/TMAG.2008.2001450

Z. J. Liu and J. T. Li, Analytical Solution of Air-Gap Field in Permanent-Magnet Motors Taking Into Account the Effect of Pole Transition Over Slots, IEEE Transactions on Magnetics, vol.43, issue.10, pp.3872-3883, 2007.
DOI : 10.1109/TMAG.2007.903417

T. Lubin, S. Mezani, and A. Rezzoug, Exact Analytical Method for Magnetic Field Computation in the Air Gap of Cylindrical Electrical Machines Considering Slotting Effects, IEEE Transactions on Magnetics, vol.46, issue.4, pp.1092-1099, 2010.
DOI : 10.1109/TMAG.2009.2036257

URL : https://hal.archives-ouvertes.fr/hal-00557548

T. Lubin, S. Mezani, and A. Rezzoug, Analytical Computation of the Magnetic Field Distribution in a Magnetic Gear, IEEE Transactions on Magnetics, vol.46, issue.7, pp.2611-2621, 2010.
DOI : 10.1109/TMAG.2010.2044187

URL : https://hal.archives-ouvertes.fr/hal-00558537

A. B. Proca, A. Keyhani, A. El-antably, W. Lu, and M. Dai, Analytical model for permanent magnet motors with surface mounted magnets, IEEE Transactions on Energy Conversion, vol.18, issue.3, pp.386-391, 2003.
DOI : 10.1109/TEC.2003.815829

R. Ravaud, G. Lemarquand, and V. Lemarquand, Force and Stiffness of Passive Magnetic Bearings Using Permanent Magnets. Part 1: Axial Magnetization, IEEE Transactions on Magnetics, vol.45, issue.7, pp.2996-3002, 2009.
DOI : 10.1109/TMAG.2009.2016088

URL : https://hal.archives-ouvertes.fr/hal-00412396

R. Ravaud, G. Lemarquand, and V. Lemarquand, Ironless permanent magnet motors: Three-dimensional analytical calculation, 2009 IEEE International Electric Machines and Drives Conference, pp.947-952, 2009.
DOI : 10.1109/IEMDC.2009.5075318

URL : https://hal.archives-ouvertes.fr/hal-00413352

H. Tiegna, A. Bellara, Y. Amara, and G. Barakat, Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots, IEEE Transactions on Magnetics, vol.48, issue.3, pp.1212-1226, 2012.
DOI : 10.1109/TMAG.2011.2171979

D. L. Trumper, W. J. Kim, and M. E. Williams, Design and analysis framework for linear permanent-magnet machines, IEEE Transactions on Industry Applications, vol.32, issue.2, pp.371-379, 1996.
DOI : 10.1109/28.491486

J. Wang, G. W. Jewell, and D. Howe, A general framework for the analysis and design of tubular linear permanent magnet machines, IEEE Transactions on Magnetics, vol.35, issue.3, pp.1986-2000, 1999.
DOI : 10.1109/20.764898

J. Wang and D. Howe, Design Optimization of Radially Magnetized, Iron-Cored, Tubular Permanent-Magnet Machines and Drive Systems, IEEE Transactions on Magnetics, vol.40, issue.5, pp.3262-3277, 2004.
DOI : 10.1109/TMAG.2004.833424

J. Wang, D. Howe, and Y. Amara, Armature reaction field and inductances of tubular modular permanent magnet machines, Journal of Applied Physics, vol.97, issue.10, pp.1-3, 2005.
DOI : 10.1063/1.1852324

J. Wang, W. Wang, K. Atallah, and D. Howe, Demagnetization Assessment for Three-Phase Tubular Brushless Permanent-Magnet Machines, IEEE Transactions on Magnetics, vol.44, issue.9, pp.2195-2203, 2008.
DOI : 10.1109/TMAG.2008.2001074

L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, Subdomain Model for Predicting Armature Reaction Field of Surface-Mounted Permanent-Magnet Machines Accounting for Tooth-Tips, IEEE Transactions on Magnetics, vol.47, issue.4, pp.812-822, 2011.
DOI : 10.1109/TMAG.2011.2104969

L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, An Improved Subdomain Model for Predicting Magnetic Field of Surface-Mounted Permanent Magnet Machines Accounting for Tooth-Tips, IEEE Transactions on Magnetics, vol.47, issue.6, pp.1693-1704, 2011.
DOI : 10.1109/TMAG.2011.2116031

G. Xiong and S. A. Nasar, Analysis of fields and forces in a permanent magnet linear synchronous machine based on the concept of magnetic charge, IEEE Transactions on Magnetics, vol.25, issue.3, pp.2713-2719, 1989.
DOI : 10.1109/20.24513

J. P. Yonnet, S. Hemmerlin, E. Rulliere, and G. Lemarquand, Analytical calculation of permanent magnet couplings, IEEE Transactions on Magnetics, vol.29, issue.6, pp.2932-2934, 1993.
DOI : 10.1109/20.280913

Y. N. Zhilichev, Three-dimensional analytic model of permanent magnet axial flux machine, IEEE Transactions on Magnetics, vol.34, issue.6, pp.3897-3901, 1998.
DOI : 10.1109/20.728300

Z. Q. Zhu, D. Howe, E. Bolte, and B. Ackermann, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field, IEEE Transactions on Magnetics, vol.29, issue.1, pp.124-135, 1993.
DOI : 10.1109/20.195557

Z. Q. Zhu and D. Howe, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. II. Armature-reaction field, IEEE Transactions on Magnetics, vol.29, issue.1, pp.136-142, 1993.
DOI : 10.1109/20.195558

Z. Q. Zhu and D. Howe, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting, IEEE Transactions on Magnetics, vol.29, issue.1, pp.143-151, 1993.
DOI : 10.1109/20.195559

Z. Q. Zhu and D. Howe, Instantaneous magnetic field distribution in permanent magnet brushless DC motors. IV. Magnetic field on load, IEEE Transactions on Magnetics, vol.29, issue.1, pp.152-158, 1993.
DOI : 10.1109/20.195560

Z. Q. Zhu, K. Ng, N. Schofield, and D. Howe, Improved analytical modelling of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets, IEE Proceedings - Electric Power Applications, vol.151, issue.6, pp.641-650, 2004.
DOI : 10.1049/ip-epa:20040546

L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load, IEEE Transactions on Magnetics, vol.48, issue.7, pp.2138-2151, 2012.
DOI : 10.1109/TMAG.2012.2187791

A. Abdel-razek, J. L. Coulomb, M. Feliachi, and J. C. Sabonadière, The calculation of electromagnetic torque in saturated electric machines within combined numerical and analytical solutions of the field equations, IEEE Transactions on Magnetics, vol.17, issue.6, pp.3250-3252, 1981.
DOI : 10.1109/TMAG.1981.1061743

F. Goby and A. , Numerical calculation of electromagnetic forces, Mathematics and Computers in Simulation, vol.29, issue.5, pp.343-350, 1987.
DOI : 10.1016/0378-4754(87)90069-3

Z. J. Liu, C. Bi, H. C. Tan, and T. S. Low, A combined numerical and analytical approach for magnetic field analysis of permanent magnet machines, IEEE Transactions on Magnetics, vol.31, issue.3, pp.1372-1375, 1995.
DOI : 10.1109/20.376282

H. Ghoizad, M. Mirsalim, M. Mirzayee, and W. Cheng, Coupled magnetic equivalent circuits and the analytical solution in the air-gap of squirrel cage induction machines, International Journal of Applied Electromagnetics and Mechanics, vol.25, pp.749-754, 2007.

H. Gholizad, M. Mirsalim, and M. Mirzayee, Dynamic analysis of highly saturated switched reluctance motors using coupled magnetic equivalent circuit and the analytical solution, CEM 2006, International Conference on Computational Electromagnetics, pp.1-2, 2006.

M. Mirzaei, M. Mirsalim, W. Cheng, and H. Ghoizad, Analysis of solid rotor induction machines using coupled analytical method and reluctance networks, International Journal of Applied Electromagnetics and Mechanics, vol.25, pp.193-197, 2007.

T. Lubin, S. Mezani, and A. Rezzoug, 2-D Exact Analytical Model for Surface-Mounted Permanent-Magnet Motors With Semi-Closed Slots, IEEE Transactions on Magnetics, vol.47, issue.2, pp.479-492, 2011.
DOI : 10.1109/TMAG.2010.2095874

URL : https://hal.archives-ouvertes.fr/hal-00558543

L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, Comparison of analytical models for predicting electromagnetic performance in surface-mounted permanent magnet machines, 2010 IEEE Vehicle Power and Propulsion Conference, pp.1-6, 2010.
DOI : 10.1109/VPPC.2010.5729155

L. J. Wu, Z. Q. Zhu, D. A. Staton, M. Popescu, and D. Hawkins, Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines, IEEE Transactions on Industrial Electronics, vol.59, issue.6, pp.2414-2425, 2012.
DOI : 10.1109/TIE.2011.2143379

A. Parviainen, M. Niemelä, and J. Pyrhönen, Modeling of Axial Flux Permanent-Magnet Machines, IEEE Transactions on Industry Applications, vol.40, issue.5, pp.1333-1340, 2004.
DOI : 10.1109/TIA.2004.834086

E. P. Furlani, A three-dimensional field solution for axially-polarized multipole disks, Journal of Magnetism and Magnetic Materials, vol.135, issue.2, pp.205-214, 1994.
DOI : 10.1016/0304-8853(94)90347-6

Q. Gu and H. Gao, The fringing effect in PM electric machines, Elect. Mach. Power Syst, vol.11, pp.159-169, 1986.

J. Wang, D. Howe, and G. W. Jewell, Fringing in tubular permanent-magnet machines: part I. magnetic field distribution, flux linkage, and thrust force, IEEE Transactions on Magnetics, vol.39, issue.6, pp.3507-3516, 2003.
DOI : 10.1109/TMAG.2003.819463

A. Borisavljevic, H. Polinder, and J. A. Ferreira, Calculation of unbalanced magnetic force in slotless PM machines, ELECTRIMACS 2011, pp.1-6, 2011.

D. Guo, F. Chu, and D. Chen, THE UNBALANCED MAGNETIC PULL AND ITS EFFECTS ON VIBRATION IN A THREE-PHASE GENERATOR WITH ECCENTRIC ROTOR, Journal of Sound and Vibration, vol.254, issue.2, pp.297-312, 2002.
DOI : 10.1006/jsvi.2001.4088

J. T. Li, Z. J. Liu, and L. H. Nay, Effect of Radial Magnetic Forces in Permanent Magnet Motors With Rotor Eccentricity, IEEE Transactions on Magnetics, vol.43, issue.6, pp.2525-2527, 2007.
DOI : 10.1109/TMAG.2007.896204

J. P. Wang and D. K. Lieu, Magnetic lumped parameter modeling of rotor eccentricity in brushless permanent-magnet motors, IEEE Trans. Magn, vol.25, issue.5, pp.4226-4231, 1999.

U. Kim and D. K. Lieu, Magnetic field calculation in permanent magnet motors with rotor eccentricity: without slotting effect, IEEE Transactions on Magnetics, vol.34, issue.4, pp.2243-2252, 1998.
DOI : 10.1109/20.703862

U. Kim and D. K. Lieu, Magnetic field calculation in permanent magnet motors with rotor eccentricity: with slotting effect considered, IEEE Transactions on Magnetics, vol.34, issue.4, pp.2253-2266, 1998.
DOI : 10.1109/20.703863

U. Kim and D. K. Lieu, Effects of magnetically induced vibration force in brushless permanent-magnet motors, IEEE Transactions on Magnetics, vol.41, issue.6, pp.2164-2172, 2005.
DOI : 10.1109/TMAG.2005.847628

J. Fu and C. Zhu, Subdomain Model for Predicting Magnetic Field in Slotted Surface Mounted Permanent-Magnet Machines With Rotor Eccentricity, IEEE Transactions on Magnetics, vol.48, issue.5, pp.1906-1917, 2012.
DOI : 10.1109/TMAG.2011.2178250

F. Wang and L. Xu, Calculation and measurement of radial and axial forces for a bearingless pmdc motor, Proc. of IEEE Industry Applications Conference, pp.249-252, 2000.

J. Wang, D. Howe, and G. W. Jewell, Analysis and Design Optimization of an Improved Axially Magnetized Tubular Permanent-Magnet Machine, IEEE Transactions on Energy Conversion, vol.19, issue.2, pp.289-295, 2004.
DOI : 10.1109/TEC.2004.827026

A. Chebak, P. Viarouge, and J. Cros, Optimal design of a high-speed slotless permanent magnet synchronous generator with soft magnetic composite stator yoke and rectifier load, Mathematics and Computers in Simulation, vol.81, issue.2, pp.239-251, 2010.
DOI : 10.1016/j.matcom.2010.05.002

J. Wang, D. Howe, and G. W. Jewell, Design and Experimental Verification of a Linear Permanent Magnet Generator for a Free-Piston Energy Converter, IEEE Transactions on Energy Conversion, vol.22, issue.2, pp.299-306, 2007.
DOI : 10.1109/TEC.2006.875434

J. Wang and D. Howe, Tubular modular permanent-magnet machines equipped with quasi-Halbach magnetized magnets-part II: armature reaction and design optimization, IEEE Transactions on Magnetics, vol.41, issue.9, pp.2479-2489, 2005.
DOI : 10.1109/TMAG.2005.854327

J. Wang, M. Inoue, Y. Amara, and D. Howe, Cogging-force-reduction techniques for linear permanent-magnet machines, IEE Proceedings - Electric Power Applications, vol.152, issue.3, pp.731-738, 2005.
DOI : 10.1049/ip-epa:20045254

N. A. Karim, J. Azzouzi, and G. Barakat, Winding functions theory and Maxwell's equations coupled analytical modeling of an axial flux PM synchronous machine, Int. Rev. Electr. Eng, vol.1, pp.27-35, 2006.

P. L. Alger, Induction Machines. 2 nd edition, Gordon and Breach, 1970.

J. L. Coulomb, G. Meunier, and J. C. Sabonadière, Energy methods for the evaluation of global quantities and integral parameters in a finite elements analysis of electromagnetic devices, IEEE Transactions on Magnetics, vol.21, issue.5, pp.1817-1822, 1985.
DOI : 10.1109/TMAG.1985.1064107

Y. Amara, P. Reghem, and G. Barakat, Analytical Prediction of Eddy-Current Loss in Armature Windings of Permanent Magnet Brushless AC Machines, IEEE Transactions on Magnetics, vol.46, issue.8, pp.3481-3484, 2010.
DOI : 10.1109/TMAG.2010.2046885

Y. Amara, J. Wang, and D. Howe, Analytical Prediction of Eddy-Current Loss in Modular Tubular Permanent-Magnet Machines, IEEE Transactions on Energy Conversion, vol.20, issue.4, pp.761-770, 2005.
DOI : 10.1109/TEC.2005.853732

Y. Amara, J. Wang, and D. Howe, Stator Iron Loss of Tubular Permanent-Magnet Machines, IEEE Transactions on Industry Applications, vol.41, issue.4, pp.989-995, 2005.
DOI : 10.1109/TIA.2005.851047

K. Atallah, D. Howe, P. H. Mellor, and D. A. Stone, Rotor loss in permanent magnet brushless AC machines, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272), pp.1612-1618, 2000.
DOI : 10.1109/IEMDC.1999.769027

G. Bertotti, A. Boglietti, M. Chiampi, D. Chiarabaglio, F. Fiorillo et al., An improved estimation of iron losses in rotating electrical machines, IEEE Transactions on Magnetics, vol.27, issue.6, pp.5007-5009, 1990.
DOI : 10.1109/20.278722

M. Rakotovoa, Un modèle opérationnel complet pour l'alternateur à griffes dans le domaine automobile, Thèse de doctorat de l'École Normale Supérieure de Cachan (ENS Cachan), 1996.

F. Chabot, Contribution à la conception d'un entraînement basé sur une machine à aimants permanents fonctionnant sans capteur sur une large plage de vitesse, Thèse de Doctorat, 2000.

L. Vido, Etude d'actionneurs électriques a double excitation destinées au transport. Dimensionnement de structrures synchrones, Thèse de Doctorat, 2004.

L. Albert, Modélisation et optimisation des alternateurs à griffes Application au domaine automobile, Thèse de Doctorat de l'Institut National Polytechnique de Grenoble (INPG), juil, 2004.

A. Takorabet, Dimensionnement d'une machine à double excitation de structure innovante pour une application alternateur automobile. Comparaison à des structures classiques, Thèse de Doctorat, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00505148

S. Hlioui, Etude d'une machine synchrone à double excitation ? Contribution à la mise en place d'une plate-forme logicielle en vue d'un dimensionnement optimal, Thèse de Doctorat, 2008.

V. Ostovic, Dynamics of saturated electric machines, Éd, 1989.

M. Hecquet, Contribution à la modélisation des systèmes électrotechniques par la méthode des schémas équivalents magnétiques

Z. Q. Zhu, Y. Pang, D. Howe, S. Iwasaki, R. Deodhar et al., Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model, IEEE Transactions on Magnetics, vol.41, issue.11, pp.4277-4287, 2005.
DOI : 10.1109/TMAG.2005.854441

B. Nedjar, Modélisation basée sur la méthode des réseaux de perméances en vue de l'optimisation de machines synchrones à simple et à double excitation, Thèse de Doctorat, 2011.

D. A. Philips, Coupling finite elements and magnetic networks in magnetostatics, International Journal for Numerical Methods in Engineering, vol.11, issue.10, 1991.
DOI : 10.1002/nme.1620351005

P. Dular, J. Gyselinck, T. Henneron, and F. Piriou, Dual finite element formulations for lumped reluctances coupling, IEEE Transactions on Magnetics, vol.41, issue.5, pp.1396-1399, 2005.
DOI : 10.1109/TMAG.2005.844348

E. I. King, Equivalent circuit for two dimensional magnetic fields: I-Thestatic field, IEEE Trans. On Power Apparatus and Systems, vol.85, issue.9, pp.927-935, 1966.

C. J. Carpenter, Finite-element network models and their application to eddy-current problems, Proc. IEE, pp.455-462, 1975.
DOI : 10.1049/piee.1975.0125

K. R. Davey and E. I. King, A three-dimensional scalar potential field solution and its application to the turbine generator end region, IEEE Trans. On Power Apparatus and Systems, vol.100, issue.5, pp.2302-2310, 1981.

J. K. Sykulski, Computational magnetics, 1995.
DOI : 10.1007/978-94-011-1278-9

M. Latreche, Modélisation magnétique et thermique des machines électriques par schémas équivalents, Thèse de Doctorat, Institut National Polytechnique de, 1987.

D. H. Im and J. P. Hong, Magnetic field analysis of permanent magnet motor using 3 dimensional equivalent magnetic circuit network method, KIEE, vol.43, issue.9, pp.1432-1439, 1994.

J. Hur, S. B. Yoon, D. Y. Hwang, and D. S. Hyun, Analysis of PMLSM using three dimensional equivalent magnetic circuit network method, IEEE Trans. Magn, vol.33, issue.5, pp.4143-4145, 1997.

C. B. Rasmussen and E. Ritchie, A magnetic equivalent circuit approach for predicting PM motor performance, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting, pp.10-17, 1997.
DOI : 10.1109/IAS.1997.643001

A. Demenko, L. Nowak, and W. Szelag, Reluctance network formed by means of edge element method, IEEE Transactions on Magnetics, vol.34, issue.5, pp.2485-2488, 1998.
DOI : 10.1109/20.717572

J. Hur, I. S. Jung, and D. S. Hyun, Lateral characteristic analysis of PMLSM considering overhang effect by 3 dimensional equivalent magnetic circuit network method, IEEE Trans. Magn, vol.34, issue.5, pp.3528-3531, 1998.

I. S. Jung, J. Hur, and D. S. Hyun, 3-D analysis of permanent magnet linear synchronous motor with magnet arrangement using equivalent magnetic circuit network method, IEEE Transactions on Magnetics, vol.35, issue.5, pp.3736-3738, 1999.
DOI : 10.1109/20.800648

J. Hur, H. A. Toliyat, and J. Hong, Dynamic analysis of linear induction motor using 3-D equivalent magnetic circuit network method, Elect. Power Comp. Syst, vol.29, issue.6, pp.531-541, 2001.

Y. H. Kim, C. S. Jin, S. Kim, Y. D. Chun, and J. Lee, Analysis of hybrid stepping motor using 3D equivalent magnetic circuit network method based on trapezoidal element, Journal of Applied Physics, vol.91, issue.10, pp.8311-8313, 2002.
DOI : 10.1063/1.1456046

J. Perho, Reluctance network for analysing induction machines, Acta Polytechnica Scandinavica, Electrical Engineering Series, 2002.

Y. D. Chun, J. E. Oh, Y. Fujishima, S. Wakao, J. Lee et al., Comparison between three-dimensional (3D) equivalent magnetic circuit network method and 3D finite element method for magnetic-field computation, Journal of Applied Physics, vol.97, issue.10, pp.1-3, 2005.
DOI : 10.1063/1.1853195

M. Amrhein and P. T. Krein, 3-D Magnetic Equivalent Circuit Framework for Modeling Electromechanical Devices, IEEE Transactions on Energy Conversion, vol.24, issue.2, pp.397-405, 2009.
DOI : 10.1109/TEC.2009.2016134

M. Amrhein and P. T. Krein, Force Calculation in 3-D Magnetic Equivalent Circuit Networks With a Maxwell Stress Tensor, IEEE Transactions on Energy Conversion, vol.24, issue.3, pp.587-593, 2009.
DOI : 10.1109/TEC.2009.2016142

M. Amrhein and P. T. Krein, Induction Machine Modeling Approach Based on 3-D Magnetic Equivalent Circuit Framework, IEEE Transactions on Energy Conversion, vol.25, issue.2, pp.339-347, 2010.
DOI : 10.1109/TEC.2010.2046998

M. L. Bash, J. M. Williams, and S. D. Pekarek, Incorporating Motion in Mesh-Based Magnetic Equivalent Circuits, IEEE Transactions on Energy Conversion, vol.25, issue.2, pp.329-338, 2010.
DOI : 10.1109/TEC.2009.2035513

T. K. Hoang, D. H. Kang, and J. Y. Lee, Comparisons Between Various Designs of Transverse Flux Linear Motor in Terms of Thrust Force and Normal Force, IEEE Transactions on Magnetics, vol.46, issue.10, pp.3795-3801, 2010.
DOI : 10.1109/TMAG.2010.2050894

S. Clénet and F. Piriou, Calcul du champ électromagnétique en basses fréquences. Modèles numériques par éléments finis, 2008.

G. Barakat, Modélisation de dispositifs électromécaniques de conversion d'énergie : vers une plate-forme de modélisation pour la conception, la simulation et le diagnostic, 2003.

J. Azzouzi, Contribution à la modélisation et à l'optimisation des machines synchrones à aimants permanents à flux axial, 2007.

N. Karim, Dimensionnement et optimisation d'un aérogénérateur à aimants permanents à flux axial de petite puissance, Thèse de Doctorat, 2008.

A. Binder, T. Shneider, and M. Klohr, Fixation of buried and surface-mounted magnets in high-speed permanent-magnet synchronous machines, IEEE Transactions on Industry Applications, vol.42, issue.4, pp.1031-1037, 2006.
DOI : 10.1109/TIA.2006.876072

R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartheld, Motor bearing damage detection using stator current monitoring, IEEE Transactions on Industry Applications, vol.31, issue.6, pp.1274-1279, 1995.
DOI : 10.1109/28.475697

Z. Q. Zhu, D. Ishak, D. Howe, and J. Chen, Unbalanced Magnetic Forces in Permanent-Magnet Brushless Machines With Diametrically Asymmetric Phase Windings, IEEE Transactions on Industry Applications, vol.43, issue.6, pp.1544-1553, 2007.
DOI : 10.1109/TIA.2007.908158

V. Debusschere, Contributions méthodologiques à l'éco-conception des convertisseurs électromagnétiques d'énergie, Thèse de doctorat de l'École Normale Supérieure de Cachan (ENS Cachan), 2009.

L. Travaux-de-thèse-de-sami and . Hlioui, 13] se sont intéressés, comme indiqué au premier chapitre, au développement d'un outil de dimensionnement optimal basé sur des modèles semi-numériques (réseaux de réluctances) de type premier harmonique, et une inversion par l'intermédiaire d'algorithmes d'optimisation. Les travaux de Boumedyen Nedjar ont eu pour but d'améliorer l

. Dans-la-seconde-partie, nous reproduisons une copie d'un document publié dans lesTechniques de l'Ingénieurs" [15]. Celui-ci résume de manière assez synthétique l'approche adoptée pour l

. Dans-ce-cadre, il serait intéressant d'étudier la possibilité d'utiliser les machines à double excitation dans les systèmes de génération électrique pour éoliennes de fortes puissances

Y. Amara, L. Vido, M. Gabsi, E. Hoang, A. H. Ahmed et al., Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion, IEEE Transactions on Vehicular Technology, vol.58, issue.5, pp.2137-2149, 2009.
DOI : 10.1109/TVT.2008.2009306

T. Finken and K. Hameyer, Study of Hybrid Excited Synchronous Alternators for Automotive Applications Using Coupled FE and Circuit Simulations, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1598-1601, 2008.
DOI : 10.1109/TMAG.2007.916114

A. S. Al-adsani and N. Schofield, Hybrid permanent magnet generators for electric vehicle applications, 2009 IEEE International Electric Machines and Drives Conference, pp.1754-1761, 2009.
DOI : 10.1109/IEMDC.2009.5075440

Y. Amara, J. Lucidarme, M. Gabsi, M. Lécrivain, A. H. Ahmed et al., A new topology of hybrid synchronous machine, IEEE Transactions on Industry Applications, vol.37, issue.5, pp.1273-1281, 2001.
DOI : 10.1109/28.952502

Y. Amara, E. Hoang, M. Gabsi, M. Lécrivain, A. H. Ahmed et al., Measured Performances of a New Hybrid Excitation Synchronous Machine, EPE Journal, vol.12, issue.4, pp.42-50, 2002.
DOI : 10.1080/09398368.2002.11463517

Y. Amara, H. B. Ahmed, M. Gabsi, M. Lécrivain, and F. Chabot, Machines synchrones ?? double excitation Analyse et optimisation du fonctionnement pour la traction ??lectrique, Revue internationale de g??nie ??lectrique, vol.7, issue.1-2, pp.163-199, 2004.
DOI : 10.3166/rige.7.163-199

Y. Amara, M. Gabsi, H. B. Ahmed, E. Hoang, and M. Lécrivain, Classification of threephase synchronous alternators associated to a diode rectifier with a constant-voltage load, Journal, vol.10, issue.3, pp.286-291

L. Vido, Y. Amara, E. Hoang, M. Gabsi, H. B. Ahmed et al., Efficiency of alternators debiting on a diode bridge with a constant-voltage load, ELECTROMOTION Journal, vol.10, issue.3, pp.311-316

Y. Amara, A. H. Ahmed, E. Hoang, L. Vido, M. Gabsi et al., Hybrid Excitation Synchronous Alternator Connected to a Diode Rectifier with a Resistive Load, EPE Journal, vol.16, issue.2, pp.29-36, 2006.
DOI : 10.1080/09398368.2006.11463617

Y. Amara, Contribution à la conception et à la commande des machines à double excitation, 2001.

L. Vido, Etude d'actionneurs électriques à double excitation destinés au transport, 2004.

A. Takorabet, Dimensionnement d'une machine à double excitation de structure innovante pour une application alternateur automobile. Comparaison à des structures classiques, Thèse de Doctorat, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00505148

S. Hlioui, Etude d'une machine synchrone à double excitation ? Contribution à la mise en place d'une plate-forme logicielle en vue d'un dimensionnement optimal, Thèse de Doctorat, 2008.

B. Nedjar, Modélisation basée sur la méthode des réseaux de perméances en vue de l'optimisation de machines synchrones à simple et à double excitation, Thèse de Doctorat, 2011.

L. Vido, Y. Amara, and M. Gabsi, Machines synchrones à double excitation MSDE, 2011.

B. Nedjar, S. Hlioui, Y. Amara, L. Vido, M. Gabsi et al., A New Parallel Double Excitation Synchronous Machine, IEEE Transactions on Magnetics, vol.47, issue.9, pp.2252-2260, 2011.
DOI : 10.1109/TMAG.2011.2134864

Y. Amara, S. Hlioui, R. Belfkira, G. Barakat, and M. Gabsi, Comparison of Open Circuit Flux Control Capability of a Series Double Excitation Machine and a Parallel Double Excitation Machine, IEEE Transactions on Vehicular Technology, vol.60, issue.9, pp.4194-4207, 2011.
DOI : 10.1109/TVT.2011.2173704

E. Hoang, M. Lécrivain, and M. Gabsi, A new structure of a switching flux synchronous polyphased machine with hybrid excitation, 2007 European Conference on Power Electronics and Applications, pp.1-8, 2007.
DOI : 10.1109/EPE.2007.4417204

URL : https://hal.archives-ouvertes.fr/hal-00532995

E. Sulaiman, T. Kosaka, Y. Tsujimori, and N. Matsui, Design of 12-slot 10-pole permanent magnet flux-switching machine with hybrid excitation for hybrid electric vehicle, Proc. 5 th IET Int. Conference on Power Electronics, Machines and Drives (PEMD2010), pp.1-5, 2010.

R. L. Owen, Z. Q. Zhu, and G. W. Jewell, Hybrid-excited flux-switching permanentmagnet machines with iron flux bridges, IEEE Transactions on Magnetics, vol.46, issue.6, pp.1723-1729, 2010.

J. T. Chen, Z. Q. Zhu, S. Iwasaki, and R. P. Deodhar, A Novel Hybrid-Excited Switched-Flux Brushless AC Machine for EV/HEV Applications, IEEE Transactions on Vehicular Technology, vol.60, issue.4, pp.1365-1373, 2011.
DOI : 10.1109/TVT.2011.2132811

W. Hua, M. Cheng, and G. Zhang, A Novel Hybrid Excitation Flux-Switching Motor for Hybrid Vehicles, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4728-4731, 2009.
DOI : 10.1109/TMAG.2009.2022497

C. Liu, K. T. Chau, J. Z. Jiang, and L. Jian, Design of a new outer-rotor permanent magnet hybrid machine for wind power generation, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1494-1497, 2008.

C. Liu, K. T. Chau, and J. Z. Jiang, A Permanent-Magnet Hybrid Brushless Integrated Starter–Generator for Hybrid Electric Vehicles, IEEE Transactions on Industrial Electronics, vol.57, issue.12, pp.4055-4064, 2010.
DOI : 10.1109/TIE.2010.2044128

Z. Zhang, Y. Tao, and Y. Yan, A new hybrid excitation doubly salient brushless DC generator with dual terminal output, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-5, 2010.
DOI : 10.1109/ICELMACH.2010.5608201

X. Luo and T. A. Lipo, A synchronous/permanent magnet hybrid AC machine, IEEE Transactions on Energy Conversion, vol.15, issue.2, pp.203-210, 2000.

A. D. Akemakou, Double-excitation rotating electrical machine for adjustable defluxing, U.S. Patent, 2006.

K. Kamiev, J. Nerg, J. Pyrhönen, and V. Zaboin, Hybrid excitation synchronous generators for island operation, Proc. Int. Conference on Electrical Machines (ICEM2010), pp.1-6, 2010.

F. Xinghe and Z. Jibin, Numerical Analysis on the Magnetic Field of Hybrid<newline/> Exciting Synchronous Generator, IEEE Transactions on Magnetics, vol.45, issue.10, pp.4590-4593, 2009.
DOI : 10.1109/TMAG.2009.2023625

C. Yang, H. Lin, J. Guo, and Z. Q. Zhu, Design and Analysis of a Novel Hybrid Excitation Synchronous Machine With Asymmetrically Stagger Permanent Magnet, IEEE Transactions on Magnetics, vol.44, issue.11, pp.4353-4356, 2008.
DOI : 10.1109/TMAG.2008.2001325

J. A. Tapia, F. Leonardi, and T. A. Lipo, Consequent-pole permanent-magnet machine with extended field-weakening capability, IEEE Transactions on Industry Applications, vol.39, issue.6, pp.1704-1709, 2003.
DOI : 10.1109/TIA.2003.818993

Z. Zhang, Y. Yan, S. Yang, and Z. Bo, Principle of Operation and Feature Investigation of a New Topology of Hybrid Excitation Synchronous Machine, IEEE Transactions on Magnetics, vol.44, issue.9, pp.2174-2180, 2008.
DOI : 10.1109/TMAG.2008.2000513

T. Kosaka and N. Matsui, Hybrid excitation machines with powdered iron core for electrical traction drive applications, Proc. Int. Conference on Electrical Machines and Systems (ICEMS2008), pp.2974-2979, 2008.

T. Kosaka, M. Sridharbabu, M. Yamamoto, and N. Matsui, Design Studies on Hybrid Excitation Motor for Main Spindle Drive in Machine Tools, IEEE Transactions on Industrial Electronics, vol.57, issue.11, pp.3807-3813, 2010.
DOI : 10.1109/TIE.2010.2040560

V. Moynot, F. Chabot, M. Lécrivain, M. Gabsi, and S. Hlioui, Rotating electric machine with homopolar double excitation, 2010.

M. Aydin, T. A. Lipo, and S. Huang, Field controlled axial flux permanent magnet electrical machine, U.S. Patent, pp.46124-46125, 2007.

R. Mizutani, K. Tatematsu, E. Yamada, N. Matsui, and T. Kosaka, Rotating electric motor, 2011.

E. Hoang, M. Lécrivain, and M. Gabsi, Flux-switching dual excitation electrical machine, 2010.

H. Greif, N. T. Nguyen, A. Mueller, and K. Reutlinger, Electric machine with a rotor with hybrid excitation, 2011.

K. Reutlinger, Electric machine comprising a rotor with hybrid excitation, 2010.

G. Wang, A hybrid excitation synchronous generator, 2009.

H. Yu, M. Hu, L. Shi, and F. Qin, Hybrid excitation linear synchronous motor using Halbach permanent magnet, 2009.

Y. Cai, Q. Zeng, and G. Xia, Tangential-set magnet double salient hybrid excitation motor, 2010.

J. Shen and C. Wang, Flux motor with hybrid excitation switch, 2010.

C. Jun, X. Cao, X. Y. Chen, Z. Deng, Z. Liu et al., Hybrid excitation block type stator and rotor switch reluctance machine, 2010.

Z. Liu, Hybrid excitation synchronous generator with low cogging effect, 2010.

H. Guo, H. Wang, and C. Zhao, Hybrid excitation brushless synchronous motor, Chinese Patent CN 101752969 A, 2010.

Y. Fang, Q. Liu, J. Ma, L. Meng, L. Wang et al., Hybrid excitation structure, Chinese Patent CN 101814821 A, 2010.

S. J. Xie and Z. Xu, Multitooth magnetic bridge type hybrid excitation magnetic flux switching motor, 2010.

M. Gabsi, Conception et alimentation de machines spéciales, 1999.

G. I. Taylor, Distribution of Velocity and Temperature between Concentric Rotating Cylinders, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.151, issue.874, pp.494-512, 1935.
DOI : 10.1098/rspa.1935.0163

D. A. Howey, Thermal design of air-cooled axial flux permanent magnet machines, Doctor of Philosophy, 2010.

B. Multon, Conception et alimentation électronique des machines à réluctance variable à double saillance. Habilitation à Diriger des Recherches, 1994.