]. F. Ahmed, S. Laghrouche, and M. Bagdouri, An experimental comparative study of different second order sliding mode algorithms on a mechatronic actuator, Proceedings of the 2011 American Control Conference
DOI : 10.1109/ACC.2011.5990972

]. D. Ainley and G. C. Mathieson, An examination of the flow and pressure losses in blade rows of axial flow turbines. Ministry of supply technical memorandum no. 2891, Aeronautical Research Council Friction modeling, identification and compensation, Proc. IEEE american control conference ACC, pp.5286-5291, 1951.

B. W. Andersen, The Analysis and Design of Pneumatic Systems, Journal of Applied Mechanics, vol.34, issue.4, p.29, 1967.
DOI : 10.1115/1.3607835

B. Armstrong-hélouvry, P. Dupont, and C. Canudas-de-wit, A survey of models, analysis tools and compensation methods for the control of machines with friction, Automatica, vol.30, issue.7
DOI : 10.1016/0005-1098(94)90209-7

K. J. Astrom and C. Canudas-de-wit, Revisiting the lugre model, stick-slip motion and rate dependence, IEEE control systems Magazine, p.49, 2008.

M. Belgharbi, S. Sesmat, S. Scavarda, and D. Thomasset, Analytical model of flow stage of an pneumatic servo-distributor for simulation and nonlinear control, 6th Scandinavian international conference on fluid power, Finland, pp.847-860, 1999.

J. E. Bobrow, B. W. Mcdonell, F. P. Bowden, and R. E. Krieger, Modeling, identification, and control of a pneumatically actuated, force controllable robot, IEEE Transactions on Robotics and Automation, vol.14, issue.5, pp.732-742, 1973.
DOI : 10.1109/70.720349

X. Brun, M. Belgharbi, S. Sesmat, D. Thomasset, and S. Scavarda, Control of an electropneumatic actuator: Comparison between some linear and non-linear control laws, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol.118, issue.2, pp.387-406, 1999.
DOI : 10.1243/0959651991540232
URL : https://hal.archives-ouvertes.fr/hal-00141155

C. Canudas-de-wit and P. Lischinsky, Adaptive friction compensation with partially known dynamic friction model, International Journal of Adaptive Control and Signal Processing, vol.11, issue.1, pp.65-80, 1997.
DOI : 10.1002/(SICI)1099-1115(199702)11:1<65::AID-ACS395>3.0.CO;2-3

C. Canudas-de-wit, H. Olsson, J. K. Astrom, and P. Lischinsky, A new model for control of systems with friction, IEEE Transactions on Automatic Control, vol.40, issue.3, pp.419-426, 1995.
DOI : 10.1109/9.376053

J. F. Carneiro and F. G. Almeida, Reduced-order thermodynamic models for servopneumatic actuator chambers, Journal of Systems and Control Engineering, vol.220, pp.301-314, 2006.

B. Challen and R. Baranescu, Diesel Engine Reference Book, Publishers Butterworth- Heinemann, 1999.

N. Chen, Simulation of Response Sensitivity of Electro-Hydraulic Actuator for Hybrid Vehicle Engine, 2009 Asia-Pacific Power and Energy Engineering Conference, p.81, 2008.
DOI : 10.1109/APPEEC.2009.4918755

S. B. Choi and S. K. Lee, A HYSTERESIS MODEL FOR THE FIELD-DEPENDENT DAMPING FORCE OF A MAGNETORHEOLOGICAL DAMPER, Journal of Sound and Vibration, vol.245, issue.2, pp.375-383, 2001.
DOI : 10.1006/jsvi.2000.3539

A. F. Contreras, I. Quiroz, and C. C. Wit, Further results on modeling and identification of an electronic throttle body. 10th Mediterranean conference on control and automation, pp.47-51, 2002.

P. Dahl, Measurement of solid friction parameters of ball bearings, Sixth Annual Symposium on Incremental Motion Control Systems and Devices, p.49, 1977.

W. Du and O. Leonard, Numerical Simulation of Surge in Axial Compressor, International Journal of Rotating Machinery, vol.100, issue.1, pp.1-10, 2012.
DOI : 10.1016/j.nucengdes.2007.01.019

P. Emanuele, E. Perez, X. Blasco, J. V. Salcedo, M. Martinez et al., Characterization and control of the air management actuators in a variable geometry turbocharged diesel engine. World automotive congress, p.17, 2004.

P. Eyabi and G. Washington, Modeling and sensorless control of an electromagnetic valve actuator, Mechatronics, vol.16, issue.3-4, pp.159-175, 2006.
DOI : 10.1016/j.mechatronics.2005.11.008

L. Freidovich, A. Robertsson, A. Shiriaev, and R. Johansson, LuGre-Model-Based Friction Compensation, IEEE Transactions on Control Systems Technology, vol.18, issue.1, pp.194-200, 2010.
DOI : 10.1109/TCST.2008.2010501

N. Gaber, G. Foley, P. Pascual, N. Stiber, E. Sunderland et al., Guidance on the development, evaluation, and application of environmental models, p.81, 2009.

J. Galindo, H. Climent, C. Guardiola, and J. Domenech, Modeling the Vacuum Circuit of a Pneumatic Valve System, Journal of Dynamic Systems, Measurement, and Control, vol.131, issue.3, pp.3-22, 2009.
DOI : 10.1115/1.3089562

C. Garcia, Comparison of friction models applied to a control valve, Control Engineering Practice, vol.16, issue.10, pp.1231-1243, 2008.
DOI : 10.1016/j.conengprac.2008.01.010

A. Girin, Contribuition a la commande non lineaire d'un système électropneumatique pour une utilisation aéronautique, p.94, 2007.

A. Girin, F. Plestan, X. Brun, and A. Glumineau, High-Order Sliding-Mode Controllers of an Electropneumatic Actuator: Application to an Aeronautic Benchmark, IEEE Transactions on Control Systems Technology, vol.17, issue.3, pp.633-645, 2009.
DOI : 10.1109/TCST.2008.2002950
URL : https://hal.archives-ouvertes.fr/hal-00207663

T. E. Graedel, D. T. Hawkins, and L. D. Claxton, Atmospheric Chemical Compounds: Sources, Occurrence and Bioassay, 1986.

N. Gulati and E. J. Barth, A Globally Stable, Load-Independent Pressure Observer for the Servo Control of Pneumatic Actuators, IEEE/ASME Transactions on Mechatronics, vol.14, issue.3, pp.295-306, 2009.
DOI : 10.1109/TMECH.2008.2009222

L. Guzzella and C. H. Onder, Introduction to modeling and control of internal combustion engine system, pp.10-37, 2004.

T. Hagglund, A friction compensator for pneumatic control valves, Journal of Process Control, vol.12, issue.8, pp.897-904, 2002.
DOI : 10.1016/S0959-1524(02)00015-X

J. Heywood, Internal Combustion Engine Fundamentals Publishers McGraw-Hill, ISBN-13: 978-0070286375, p.147, 1988.

H. Hiereth and P. Prenninger, Charging the Internal Combustion Engine, p.8, 2007.

K. A. Hoffman and S. T. Chiang, Computational Fluid Dynamics, Engineering Education System, vol.1, issue.70, pp.63-71, 2000.
DOI : 10.1007/978-3-662-07377-3_7

T. Jacobs, D. Assanis, and Z. Filipi, The Impact of Exhaust Gas Recirculation on Performance and Emissions of a Heavy-Duty Diesel Engine, SAE Technical Paper Series, p.11, 2003.
DOI : 10.4271/2003-01-1068

D. Karnopp, Computer Simulation of Stick-Slip Friction in Mechanical Dynamic Systems, Journal of Dynamic Systems, Measurement, and Control, vol.107, issue.1, pp.100-103, 1985.
DOI : 10.1115/1.3140698

H. K. Khalil, Nonlinear Systems. Publishers Prentice Hall, p.105, 1995.

. Yaragada, Sensitivity analysis for process parameters influencing weld quality in robotic gma welding process. journal of material processing technology, pp.676-681, 2003.

R. D. Kopa and H. Kimura, Exhaust gas recirculation as a method of nitrogen oxides control in an internal combustion engine, APCA 53rd Annual Meeting, p.11, 1960.

A. J. Kotwicki and J. Russell, Vacuum egr valve actuator model. International Fuels & Lubricants Meeting & Exposition, pp.37-148, 1998.

M. Krzyzanowski and A. Cohen, Update of WHO air quality guidelines, Air Quality, Atmosphere & Health, vol.22, issue.3, pp.7-13, 2008.
DOI : 10.1007/s11869-008-0008-9

S. Laghrouche, A. Mehmood, and M. Bagdouri, Study of the nonlinear control techniques for single acting VGT pneumatic actuator, International Journal of Vehicle Design, vol.60, issue.3/4, pp.2012-110
DOI : 10.1504/IJVD.2012.050084

S. Laghrouche, F. Plestan, and A. Glumineau, Higher order sliding mode control based on integral sliding mode, Automatica, vol.43, issue.3, pp.531-537, 2007.
DOI : 10.1016/j.automatica.2006.09.017
URL : https://hal.archives-ouvertes.fr/hal-01104478

S. Laghrouche, M. Smaoui, F. Plestan, and X. Brun, Higher order sliding mode control based on optimal approach of an electropneumatic actuator, International Journal of Control, vol.78, issue.2, pp.119-131, 2005.
DOI : 10.1016/S0167-6911(98)00036-X
URL : https://hal.archives-ouvertes.fr/hal-00140897

J. Lai and C. Menq, Accurate Position Control of a Pneumatic Actuator, Journal of Dynamic Systems, Measurement, and Control, vol.112, issue.4, p.48, 1990.
DOI : 10.1115/1.2896202

O. Leonard and O. Adam, A quasi-one-dimensional CFD model for multistage turbomachines, Journal of Thermal Science, vol.128, issue.71, pp.1-15, 2007.
DOI : 10.1007/s11630-008-0007-z

A. Levant, Sliding order and sliding accuracy in sliding mode control, International Journal of Control, vol.51, issue.6, p.111, 1993.
DOI : 10.1109/TAC.1977.1101661

P. W. Lim, N. Cheung, and M. F. Rahman, Proportional control of a solenoid actuator, Proceedings of IECON'94, 20th Annual Conference of IEEE Industrial Electronics, pp.2045-2050, 1994.
DOI : 10.1109/IECON.1994.398134

A. C. Love, G. Agnew, and B. Szczyrba, Adaptive variable geometry turbocharger strategy. patent number: US, A1, pp.13-90, 2009.

L. Marton and B. Lantos, Modeling, Identification, and Compensation of Stick-Slip Friction, IEEE Transactions on Industrial Electronics, vol.54, issue.1, pp.511-521, 2007.
DOI : 10.1109/TIE.2006.888804

G. Mattiazzo, S. Mauro, T. Raparelli, and M. Velardocchia, Control of a six-axis pneumatic robot, Journal of Robotic Systems, vol.14, issue.8, pp.363-378, 2002.
DOI : 10.1002/rob.10046

E. A. Mayer, Electro-Pneumatic Control Valve for EGR/ATC Actuation, SAE Technical Paper Series, p.3, 1981.
DOI : 10.4271/810464

A. Mehmood, S. Laghrouche, and M. Bagdouri, Nonlinear modeling of electropneumatic actuator for variable nozzle turbocharger control, Proc. 49th IEEE conference on Decision and Control CDC 2010, p.97, 2010.

A. Mehmood, S. Laghrouche, and M. Bagdouri, Control of the Electro-pneumatic VGT Actuator with Friction Compensators, Proc. 18th IFAC world congress, p.122, 2011.
DOI : 10.3182/20110828-6-IT-1002.03648

A. Mehmood, S. Laghrouche, and M. Bagdouri, Modeling identification and simulation of pneumatic actuator for vgt system. Sensors and actuators: A Physical, pp.367-378, 2011.

A. Mehmood, S. Laghrouche, and M. Bagdouri, Position tracking of the VGT single acting pneumatic actuator with 2nd order SMC and backstepping control techniques, 2012 12th International Workshop on Variable Structure Systems, p.110
DOI : 10.1109/VSS.2012.6163484

A. Mehmood, S. Laghrouche, M. Bagdouri, and F. S. Ahmed, Sensitivity analysis of LuGre friction model for pneumatic actuator control, 2010 IEEE Vehicle Power and Propulsion Conference, p.85, 2010.
DOI : 10.1109/VPPC.2010.5729116

A. Messina, N. I. Giannoccaro, and A. Gentile, Experimenting and modelling the dynamics of pneumatic actuators controlled by the pulse width modulation (PWM) technique, Mechatronics, vol.15, issue.7, pp.859-881, 2005.
DOI : 10.1016/j.mechatronics.2005.01.003

P. E. Moraal, I. V. Kolmanovsky, and M. J. Nieuwstadt, Modeling and identification of a current to vacuum transducer and vnt actuator. International conference on advanced intelligent mechatronics, pp.3-31, 1999.

K. W. Morton and D. F. Mayers, Numerical Solution of Partial Differential Equations: An Introduction, p.71, 2005.
DOI : 10.1017/CBO9780511812248

P. Moulin and J. Chauvin, Modeling and control of the air system of a turbocharged gasoline engine, Control Engineering Practice, vol.19, issue.3, p.3, 2009.
DOI : 10.1016/j.conengprac.2009.11.006

M. Muller, E. Hendricks, and S. C. Sorenson, Mean Value Modelling of Turbocharged Spark Ignition Engines, SAE Technical Paper Series, pp.125-145, 1998.
DOI : 10.4271/980784

M. Namba, H. Nakagawa, and A. Kuba, Lifting surface theory to predict aerodynamic forces induced by oscillating blades under interaction of three bladerows, Journal of Sound and Vibration, vol.326, issue.3-5
DOI : 10.1016/j.jsv.2009.06.002

S. Ning and G. M. Bone, High steady-state accuracy pneumatic servo positioning system with pva/pv control and friction compensation

H. Olsson, K. J. Astrom, C. Canudas-de-wit, M. Gafvert, and P. Lischinsky, Friction Models and Friction Compensation, European Journal of Control, vol.4, issue.3, pp.176-195, 1998.
DOI : 10.1016/S0947-3580(98)70113-X

P. H. Oosthuizen and W. Carscallen, Compressible Fluid Flow. Publishers McGraw- Hill, pp.28-35, 1997.

S. R. Pandian, F. Takemura, Y. Hayakawa, and S. Kawamura, Pressure observer-controller design for pneumatic cylinder actuators, IEEE/ASME Transactions on Mechatronics, vol.7, issue.4, pp.490-499, 2002.
DOI : 10.1109/TMECH.2002.805624

S. R. Parker, Sensitivity Analysis and Models of Nonlinear Circuits, IEEE Transactions on Circuit Theory, vol.16, issue.4, pp.443-447, 1969.
DOI : 10.1109/TCT.1969.1083002

M. A. Perry, H. P. Wynn, and R. A. Bates, Principle components analysis in sensitivity studies of dynamic systems. journal of probabilistic engineering mechanics, pp.454-460, 2006.

F. Plestan, Y. Shtessel, V. Bregeault, and A. Poznyak, Sliding mode control with gain adaptation???Application to an electropneumatic actuator, Control Engineering Practice, vol.21, issue.5
DOI : 10.1016/j.conengprac.2012.04.012
URL : https://hal.archives-ouvertes.fr/hal-00699534

J. Pohl, M. Sethson, P. Kurs, and J. Palmberg, Modeling and simulation of a fast 2/2 switching valve, Fifth International Conference on Fluid Power Transmission and Control, China, 2001.

W. W. Pulkrabek, Engineering Fundamentals of the Internal Combustion Engine, pp.9-147, 2003.

Z. Rao and G. M. Bone, Nonlinear modeling and control of servo pneumatic actuators, IEEE transactions on control systems technology, vol.16, issue.109, pp.562-569, 2008.

E. Richer and Y. Hurmuzlu, A High Performance Pneumatic Force Actuator System: Part I???Nonlinear Mathematical Model, Journal of Dynamic Systems, Measurement, and Control, vol.122, issue.3, pp.416-425, 2000.
DOI : 10.1115/1.1286336

Y. Rochdi, F. Giri, F. Z. Chaoui, F. Ikhouane, and J. Rodellar, Parametric identification of nonlinear hysteretic systems, Nonlinear Dynamics, vol.71, issue.2, pp.393-404, 2009.
DOI : 10.1007/s11071-009-9487-y
URL : https://hal.archives-ouvertes.fr/hal-01058885

D. Schindele and H. Aschemann, Adaptive friction compensation based on the lugre model for a pneumatic rodless cylinder. Industrial Electronics, IECON '09. 35th Annual Conference of IEEE, pp.1432-1437, 2009.

S. Sesmat, Modelisation, Simulation et commande d'une servovalve pneumatique, p.94, 1996.

R. Singh and C. Kunt, A linear time varying model for on-off valve controlled pneumatic actuators, Transactions of the ASME, vol.30, pp.22-48, 1990.

M. Smaoui, X. Brun, and D. Thomasset, A study on tracking position control of an electropneumatic system using backstepping design, Control Engineering Practice, vol.14, issue.8, pp.923-933, 2006.
DOI : 10.1016/j.conengprac.2005.05.003
URL : https://hal.archives-ouvertes.fr/hal-00140642

M. Smaoui, X. Brun, and D. Thomasset, High-order sliding mode for an electropneumatic system: A robust differentiator???controller design, International Journal of Robust and Nonlinear Control, vol.49, issue.4-5, pp.481-501, 2007.
DOI : 10.1002/rnc.1235
URL : https://hal.archives-ouvertes.fr/hal-00258083

G. Song and Y. Wang, A sliding-mode based smooth adaptive robust controller for friction compensation. American control conference, p.48, 1995.

A. Soren, S. Anders, and B. Stefan, Friction models for sliding dry, boundary and mixed lubricated contacts. Tribology international, pp.580-587, 2007.

R. Stribeck, Die wesentlichen eigenschaften der gleit-und rollenlager  the key qualities of sliding and roller bearings, Zeitschrift des Vereines Seutscher Ingenieure, pp.1342-1390, 1902.

S. C. Subramanian, S. Darbha, and K. R. , Modeling the Pneumatic Subsystem of an S-cam Air Brake System, Journal of Dynamic Systems, Measurement, and Control, vol.126, issue.1, pp.36-46, 2004.
DOI : 10.1115/1.1666893

V. Szente and J. Vad, Computational and experimental investigation on solenoid valve dynamics, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556), p.21, 2001.
DOI : 10.1109/AIM.2001.936537

M. Taghizadeh, A. Ghaffari, and F. Najafi, Modeling and identification of a solenoid valve for PWM control applications, Comptes Rendus M??canique, vol.337, issue.3, pp.131-140, 2009.
DOI : 10.1016/j.crme.2009.03.009

Y. Tan, J. Chang, and H. Tan, Adaptive backstepping control and friction compensation for ac servo with inertia and load uncertainties, IEEE Transactions on Industrial Electronics, vol.50, issue.121, pp.944-952, 2003.

S. Thiery, Modelisation et compensation de frottements dans un moteur lineaire, p.52, 2005.

M. Tomizuka, Mechatronics: from the 20th to 21st century, Control Engineering Practice, vol.10, issue.8, pp.877-886, 2002.
DOI : 10.1016/S0967-0661(02)00016-3

E. E. Topcu, I. Yuksel, and Z. Kamis, Development of electro-pneumatic fast switching valve and investigation of its characteristics, Mechatronics, vol.16, issue.6, pp.365-378, 2006.
DOI : 10.1016/j.mechatronics.2006.01.005

V. I. Utkin, J. Guldner, and J. Shi, Sliding mode control on electro-mechanical systems, Mathematical Problems in Engineering, vol.8, issue.4-5, p.112, 1999.
DOI : 10.1080/10241230306724

R. B. Van-verseveld and G. M. Bone, Accurate position control of pneumatic actuator using on/off solenoid valves, IEEE/ASME Transactions on Mechatronics, vol.2, issue.3, p.22, 1997.

X. Wang, Y. Cheng, and G. Peng, Modeling and self-tuning pressure regulator design for pneumatic-pressure???load systems, Control Engineering Practice, vol.15, issue.9, pp.1161-1168, 2007.
DOI : 10.1016/j.conengprac.2007.02.001

Z. Wenjing, Parameter Identification of LuGre Friction Model in Servo System Based on Improved Particle Swarm Optimization Algorithm, 2007 Chinese Control Conference, p.52, 2007.
DOI : 10.1109/CHICC.2006.4346908

F. White, Fluid mechanics. Publishers McGraw-Hill, p.22, 1994.

W. F. Xie, Sliding-Mode-Observer-Based Adaptive Control for Servo Actuator With Friction, IEEE Transactions on Industrial Electronics, vol.54, issue.3, pp.1517-1527, 2007.
DOI : 10.1109/TIE.2007.894718

N. Ye, S. Scavarda, M. Betemps, and A. Jutard, Models of a Pneumatic PWM Solenoid Valve for Engineering Applications, Journal of Dynamic Systems, Measurement, and Control, vol.114, issue.4, pp.680-688, 1992.
DOI : 10.1115/1.2897741

H. C. Yee, Numerical approximation of boundary conditions with applications to inviscid equations of gas dynamics. NASA Technical Memorandum 81265, pp.46-71, 1981.

M. K. Zavarehi and P. D. Lawrence, Nonlinear modeling and validation of solenoid-controlled pilot-operated servovalves, IEEE/ASME Transactions on Mechatronics, vol.4, issue.3, pp.324-334, 1999.
DOI : 10.1109/3516.789690

M. Zheng, G. T. Reader, and J. G. Hawley, Diesel engine exhaust gas recirculation -a review on advanced and novel concepts. Energy Conversion and Management, pp.883-900, 2004.

R. D. Zucker and O. Biblarz, Fundamentals of Gas Dynamics, p.148, 1987.

M. With, 5. , and .. , Hysteresis in the actuator at two operating points i.e. 1000RP M with full load and, p.77, 2000.