J. E. Adkins and R. S. Et-rivlin, Large Elastic Deformations of Isotropic Materials. IX. The Deformation of Thin Shells, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.244, issue.888, pp.505-532, 1952.
DOI : 10.1098/rsta.1952.0013

N. Akkas, On the dynamic snap-out instability of inflated non-linear spherical membranes, International Journal of Non-Linear Mechanics, vol.13, issue.3, pp.177-183, 1978.
DOI : 10.1016/0020-7462(78)90006-9

H. Alexander, The tensile instability of an inflated cylindrical membrane as affected by an axial load, International Journal of Mechanical Sciences, vol.13, issue.2, pp.87-95, 1971.
DOI : 10.1016/0020-7403(71)90013-0

H. Alexander, Tensile instability of initially spherical balloons, International Journal of Engineering Science, vol.9, issue.1, pp.151-162, 1971.
DOI : 10.1016/0020-7225(71)90017-6

J. M. Ball, Convexity conditions and existence theorems in nonlinear elasticity, Archive for Rational Mechanics and Analysis, vol.8, issue.4, pp.337-403, 1977.
DOI : 10.1007/BF00279992

Y. Basar and D. Et-weichert, Nonlinear Continuum Mechanics of Solids, 2000.

J. M. Batoz and G. Et-dhatt, Modélisation des structures parélémentsparéléments finis, Hermès Editions Paris, 1990.

M. F. Beatty, Topics in Finite Elasticity: Hyperelasticity of Rubber, Elastomers, and Biological Tissues???With Examples, Applied Mechanics Reviews, vol.40, issue.12, pp.1699-1734, 1987.
DOI : 10.1115/1.3149545

A. Benjeddou, E. Jankovich, and T. Et-hadhri, Determination of the Parameters of Ogden's Law Using Biaxial Data and Levenberg-Marquardt- Fletcher Algorithm, Journal of Elastomers and Plastics, vol.25, issue.3, pp.224-248, 1993.
DOI : 10.1177/009524439302500304

P. G. Bergan, G. Horrigmoe, B. Krakeland, and T. H. Et-soreide, Solution techniques for non???linear finite element problems, International Journal for Numerical Methods in Engineering, vol.1, issue.11, pp.1677-1696, 1978.
DOI : 10.1002/nme.1620121106

J. Besson, R. Et-foerch, C. R. Burt, and T. A. Et-martin, Large scale object-oriented finite element code design, Advanced Composites'93 International conference on Advanced Composite Materials, pp.165-187, 1993.
DOI : 10.1016/S0045-7825(96)01124-3

J. Bonet and R. D. Et-wood, Nonlinear Continuum Mechanics for Finite Element Analysis, 1997.
DOI : 10.1017/CBO9780511755446

J. Bonet and A. J. Et-burton, A simple orthotropic, transversely isotropic hyperelastic constitutive equation for large strain computations, Computer Methods in Applied Mechanics and Engineering, vol.162, issue.1-4, pp.151-164, 1998.
DOI : 10.1016/S0045-7825(97)00339-3

J. Bonet, R. D. Wood, J. Mahaney, and P. Et-heywood, Finite element analysis of air supported membrane structures, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.5-7, pp.579-595, 2000.
DOI : 10.1016/S0045-7825(99)00428-4

P. Bourgin, I. Cormeau, and T. Et-saint-martin, A first step towards the modelling of the thermoforming of plastic sheets, Journal of Materials Processing Technology, vol.54, issue.1-4, pp.1-11, 1995.
DOI : 10.1016/0924-0136(95)01910-3

P. Breitkopf, Revue Europenne des Eléments Finis : Approche objet enélémentsenéléments finis, pp.467-468, 1998.

D. I. Bylski, T. J. Kriewall, T. J. Akkas, and J. W. Et-melvin, Mechanical behavior of fetal dura mater under large deformation biaxial tension, Journal of Biomechanics, vol.19, issue.1, pp.19-26, 1986.
DOI : 10.1016/0021-9290(86)90105-3

J. M. Charrier, S. Shrivastava, and R. Et-wu, Free and constrained inflation of elastic membranes in relation to thermoforming ??? axisymmetric problems, The Journal of Strain Analysis for Engineering Design, vol.22, issue.2, pp.115-125, 1987.
DOI : 10.1243/03093247V222115

J. M. Charrier, S. Shrivastava, and R. Et-wu, Free and constrained inflation of elastic membranes in relation to thermoforming ?????? non-axisymmetric problems, The Journal of Strain Analysis for Engineering Design, vol.24, issue.2, pp.53-73, 1989.
DOI : 10.1243/03093247V242055

Y. C. Chen and T. J. Healey, Bifurcation to pear-shaped equilibria of pressurized spherical membranes, International Journal of Non-Linear Mechanics, vol.26, issue.3-4, pp.279-291, 1991.
DOI : 10.1016/0020-7462(91)90058-2

N. Chevaugeon, E. Verron, and B. Et-peseux, Finite element analysis of nonlinear transversely hyperelastic membranes for thermoforming applications, dans European Congress on Computational Methods in Applied Sciences and Engineering ECCOMASCD-ROM), pp.11-14, 2000.

N. Chevaugeon, E. Verron, and B. Et-peseux, Construction d'une loi de comportement isotrope transverse pour la simulation du thermoformage de thermoplastiques chargés de fibre, dans XVème congrès Français de mécanique Nancy (CD-ROM), pp.3-7, 2001.

A. H. Corneliussen and R. T. Et-shield, Finite deformation of elastic membranes with application to the stability of an inflated and extended tube, Archive for Rational Mechanics and Analysis, vol.243, issue.1, pp.273-304, 1961.
DOI : 10.1007/BF00250766

V. K. Decyk, C. D. Norton, and B. K. Et-szymanski, expressing objectoriented concepts in fortran 90, ACM Fortran Forum, vol.16, pp.16-28, 1997.

H. G. Delorenzi and H. F. Et-nied, Blow molding and thermoforming of plastics: Finite element modeling, Computers & Structures, vol.26, issue.1-2, pp.197-206, 1987.
DOI : 10.1016/0045-7949(87)90250-1

H. G. Delorenzi and H. F. Et-nied, Finite element simulation of thermoforming and blow molding, dans Progress in Polymer Processing - Modeling of Polymer Processing, pp.117-171, 1991.

C. D. Denson and R. J. Gallo, Measurements on the biaxial extension viscosity of bulk polymers: The inflation of a thin polymer sheet, Polymer Engineering and Science, vol.13, issue.2, pp.174-176, 1971.
DOI : 10.1002/pen.760110213

A. Derdouri, R. Connolly, R. E. Khayat, E. Verron, and B. Et-peseux, Material constants identification for thermoforming simulation, Conference Proceedings at ANTEC'98 vol. I, Processing, pp.672-675, 1998.

A. Derdouri, F. Erchiqui, A. Bendada, E. Verron, and B. Et-peseux, Viscoelastic behaviour of polymer membranes under inflation, Proceedings of the 13th International Congress on Rheology, pp.3394-3396, 2000.

P. R. Devloo, PZ: An object oriented environment for scientific programming, Computer Methods in Applied Mechanics and Engineering, vol.150, issue.1-4, pp.133-153, 1997.
DOI : 10.1016/S0045-7825(97)00097-2

P. De-luca, A. K. Pickett, T. Queckborner, and E. Et-haug, An explicit finite element solution for the forming prediction of continuous fibre-reinforced thermoplastic sheets, Composites Manufacturing, vol.6, pp.237-243, 1995.

S. Dubigeon, Mécanique des milieux continus, 1998.

G. A. Duffet and B. D. Et-reddy, The solution of multi-parameter systems of equations with application to problems in nonlinear elasticity, Computer Methods in Applied Mechanics and Engineering, vol.59, issue.2, pp.179-213, 1973.
DOI : 10.1016/0045-7825(86)90101-5

W. W. Feng and P. Huang, On the Inflation of a Plane Nonlinear Membrane, Journal of Applied Mechanics, vol.41, issue.3, pp.767-771, 1974.
DOI : 10.1115/1.3423385

W. W. Feng, C. H. Radewan, and K. L. Et-blaedel, Controlling biaxial strain in an inflated elastomeric membrane, Experimental Techniques, vol.9, pp.29-32, 1985.

W. W. Feng, Viscoelastic Behavior of Elastomeric Membranes, Journal of Applied Mechanics, vol.59, issue.2S, pp.29-34, 1992.
DOI : 10.1115/1.2899504

B. W. Forde, R. O. Foshi, and S. F. Et-stiemer, Object-oriented finite element analysis, Computers & Structures, vol.34, issue.3, pp.355-374, 1990.
DOI : 10.1016/0045-7949(90)90261-Y

M. G. Geers, A unification of path following techniques for nonlinear finite element analyses, dans European Conference on Computational Mechanics -ECCM '99, CD-ROM Proceedings, 18 pages, pp.31-34, 1999.

A. N. Gent and A. G. Thomas, Forms for the stored (strain) energy function for vulcanized rubber, Journal of Polymer Science, vol.28, issue.118, pp.625-637, 1958.
DOI : 10.1002/pol.1958.1202811814

N. E. Gibbs, W. G. Poole, and P. K. Et-stockmeyer, An Algorithm for Reducing the Bandwidth and Profile of a Sparse Matrix, SIAM Journal on Numerical Analysis, vol.13, issue.2, pp.236-250, 1976.
DOI : 10.1137/0713023

A. E. Green and J. E. Et-adkins, Large elastic deformations and Nonlinear Continuum Mechanics, 1960.

F. Gruttmann and R. L. Et-taylor, Theory and finite element formulation of rubberlike membrane shells using principal stretches, International Journal for Numerical Methods in Engineering, vol.1, issue.5, pp.1111-1126, 1992.
DOI : 10.1002/nme.1620350511

X. Guo, Large Deformation Analysis for a Cylindrical Hyperelastic Membrane of Rubber-Like Material under Internal Pressure, Rubber Chemistry and Technology, vol.74, issue.1, pp.101-115, 2001.
DOI : 10.5254/1.3547631

J. B. Haddow, J. L. Wegner, and L. Et-jiang, An approach to finite static axially symmetric deformation of a hyperelastic membrane, Acta Mechanica, vol.26, issue.1-4, pp.77-90, 1992.
DOI : 10.1007/BF01174168

O. Hassager, S. B. Kristensen, J. R. Larsen, and J. Et-neergaard, Inflation and instability of a polymeric membrane, Journal of Non-Newtonian Fluid Mechanics, vol.88, issue.1-2, pp.185-204, 1999.
DOI : 10.1016/S0377-0257(99)00018-X

D. M. Haughton and R. W. Et-ogden, Bifurcation of inflated circular cylinders of elastic material under axial loading???I. Membrane theory for thin-walled tubes, Journal of the Mechanics and Physics of Solids, vol.27, issue.3, pp.179-212, 1979.
DOI : 10.1016/0022-5096(79)90001-2

D. M. Haughton, Post-bifurcation of perfect and imperfect spherical elastic membranes, International Journal of Solids and Structures, vol.16, issue.12, pp.1123-1133, 1980.
DOI : 10.1016/0020-7683(80)90067-0

P. Haupt, L. J. Hart-smith, and J. D. Et-crisp, Continuum Mechanics and Theory of Materials Elasticty parameters for finite deformations of rubber-like materials, Z. Angew. Math. Phys, vol.17, pp.608-626, 1966.

F. P. Hsu, C. Schwab, D. Rigamonti, and J. D. Et-humphrey, Identification of response functions from axisymmetric membrane inflation tests: Implications for biomechanics, International Journal of Solids and Structures, vol.31, issue.24, pp.3375-3386, 1994.
DOI : 10.1016/0020-7683(94)90021-3

J. D. Humphrey, R. K. Strumpf, and F. C. Et-yin, A constitutive theory for biomembranes : application to epicardium, ASME J. Biomech. Engr, vol.114, pp.461-466, 1992.

A. Isihara, N. Hashitsume, and M. Et-tatibana, Statistical Theory of Rubber???Like Elasticity. IV. (Two???Dimensional Stretching), The Journal of Chemical Physics, vol.19, issue.12, pp.1508-1512, 1951.
DOI : 10.1063/1.1748111

C. H. Jenkins and J. W. Leonard, Nonlinear Dynamic Response of Membranes: State of the Art, Applied Mechanics Reviews, vol.44, issue.7, pp.319-328, 1991.
DOI : 10.1115/1.3119506

C. H. Jenkins, Nonlinear Dynamic Response of Membranes: State of the Art - Update, Applied Mechanics Reviews, vol.49, issue.10S, pp.41-48, 1996.
DOI : 10.1115/1.3101975

L. Jiang and J. B. Et-haddow, A finite element formulation for finite static axisymmetric deformation of hyperelastic membranes, Computers & Structures, vol.57, issue.3, pp.401-405, 1995.
DOI : 10.1016/0045-7949(94)00629-H

L. Jiang, APPLICATION OF THE TAYLOR-GALERKIN FINITE ELEMENT AND GODUNOV-TYPE FINITE DIFFERENCE METHODS TO FINITE AMPLITUDE AXISYMMETRIC WAVES IN HYPERELASTIC MEMBRANES, Journal of Sound and Vibration, vol.192, issue.1, pp.223-244, 1996.
DOI : 10.1006/jsvi.1996.0185

J. D. Poehlein, G. W. Et-denson, and C. D. , A bubble inflation technique for the measurement of viscoelastic properties in equal biaxial extensional flow, Trans. Soc. Rheol, vol.16, pp.421-445, 1972.

J. D. Poehlein, G. W. Et-denson, and C. D. , A bubble inflation technique for the measurement of viscoelastic properties in equal biaxial extensional flow. II, Trans. Soc. Rheol, vol.17, pp.287-302, 1973.

M. Kaliske, A formulation of elasticity and viscoelasticity for fibre reinforced material at small and finite strains, Computer Methods in Applied Mechanics and Engineering, vol.185, issue.2-4, pp.225-243, 2000.
DOI : 10.1016/S0045-7825(99)00261-3

R. E. Khayat, A. Derdouri, and A. Et-garcia-réjon, Inflation of an elastic cylindrical membrane: Non-linear deformation and instability, International Journal of Solids and Structures, vol.29, issue.1, pp.69-87, 1992.
DOI : 10.1016/0020-7683(92)90096-C

R. E. Khayat and A. Et-derdouri, Inflation of hyperelastic cylindrical membranes as applied to blow moulding. Part I. Axisymmetric case, International Journal for Numerical Methods in Engineering, vol.24, issue.22, pp.3773-3791, 1994.
DOI : 10.1002/nme.1620372203

R. E. Khayat and A. Et-derdouri, Inflation of hyperelastic cylindrical membranes as applied to blow moulding. Part II. Non-axisymmetric case, International Journal for Numerical Methods in Engineering, vol.37, issue.22, pp.3793-3808, 1994.
DOI : 10.1002/nme.1620372204

R. E. Khayat and A. Et-derdouri, Stretch and inflation of hyperelastic membranes as applied to blow moldiing, Polymer Engineering and Science, vol.17, issue.23, pp.1852-1863, 1995.
DOI : 10.1002/pen.760352304

W. W. Klingbeil and R. T. Et-shield, Some numerical investigations on empirical strain energy functions in the large axi-symmetric extensions of rubber membranes, Zeitschrift f??r angewandte Mathematik und Physik ZAMP, vol.28, issue.6, pp.608-609, 1964.
DOI : 10.1007/BF01595147

D. Kong and J. L. Et-white, Inflation Characteristics of Unvulcanized Gum and Compounded Rubber Sheets, Rubber Chemistry and Technology, vol.59, issue.2, pp.315-327, 1985.
DOI : 10.5254/1.3538203

X. A. Kong and D. P. Et-chen, An object-oriented design of FEM programs, Computers & Structures, vol.57, issue.1, pp.157-166, 1995.
DOI : 10.1016/0045-7949(94)00560-P

R. Kouhia and M. Et-martti, Some aspects on efficient path-following, Computers & Structures, vol.72, issue.4-5, pp.509-524, 1999.
DOI : 10.1016/S0045-7949(98)00336-8

T. J. Kriewall, N. Akkas, D. I. Bylski, J. W. Melvin, and B. A. Et-work, Mechanical Behavior of Fetal Dura Mater Under Large Axisymmetric Inflation, Journal of Biomechanical Engineering, vol.105, issue.1, pp.71-76, 1993.
DOI : 10.1115/1.3138388

A. D. Kydoniefs and J. M. Spencer, The finit inflation of an elastic toroidal membrane of circular cross section, International Journal of Engineering Science, vol.5, issue.4, pp.367-391, 1967.
DOI : 10.1016/0020-7225(67)90044-4

A. D. Kydoniefs and J. M. Spencer, FINITE AXISYMMETRIC DEFORMATIONS OF AN INITIALLY CYLINDRICAL ELASTIC MEMBRANE, The Quarterly Journal of Mechanics and Applied Mathematics, vol.22, issue.1, pp.87-95, 1969.
DOI : 10.1093/qjmam/22.1.87

S. Kyriakides and Y. Et-chang, The initiation and propagation of a localized instability in an inflated elastic tube, International Journal of Solids and Structures, vol.27, issue.9, pp.1085-1111, 1991.
DOI : 10.1016/0020-7683(91)90113-T

S. K. Kyriacou, C. Schwab, and J. D. Et-humphrey, Finite element analysis of nonlinear orthotropic hyperelastic membranes, Computational Mechanics, vol.40, issue.4, pp.269-278, 1996.
DOI : 10.1007/BF00364142

J. Laminie and F. Pascal, La méthode desélémentsdeséléments finis en Fortran 90 : vers une programmation orientée objet, 1999.

J. Lemaitre and J. L. Et-chaboche, Mechanics of Solids Materials, 1990.

I. S. Liu, On representations of anisotropic invariants, Int. J. Engng. Sci, vol.20, pp.1099-1109, 1982.

R. I. Macjkie, Object oriented programming of the finite element method, International Journal for Numerical Methods in Engineering, vol.6, issue.2, pp.425-436, 1992.
DOI : 10.1002/nme.1620350212

J. M. Maerker and W. R. Schowalter, Biaxial extension of an elastic liquid, Rheologica Acta, vol.23, issue.3, pp.627-638, 1974.
DOI : 10.1007/BF01521766

G. Marckmann, E. Verron, and B. Et-peseux, Finite element analysis of blow molding and thermoforming using a dynamic explicit procedure, Polymer Engineering & Science, vol.15, issue.3, pp.426-439, 2001.
DOI : 10.1002/pen.10740
URL : https://hal.archives-ouvertes.fr/hal-01006898

B. Meyer, Conception et programmation par objets, Interéditions, 1990.

J. S. Miller, Pressure within a Bubble, American Journal of Physics, vol.20, issue.2, p.115, 1952.
DOI : 10.1119/1.1933135

G. R. Miller, A LISP-based object-oriented approach to structural analysis, Engineering with Computers, vol.2, issue.4, pp.197-203, 1988.
DOI : 10.1007/BF01213981

G. R. Miller, An object-oriented approach to structural analysis and design, Computers & Structures, vol.40, issue.1, pp.75-82, 1991.
DOI : 10.1016/0045-7949(91)90459-Y

. Mooney, A Theory of Large Elastic Deformation, Journal of Applied Physics, vol.11, issue.9, pp.3-14, 1940.
DOI : 10.1063/1.1712836

K. L. Morman, The Generalized Strain Measure With Application to Nonhomogeneous Deformations in Rubber-Like Solids, Journal of Applied Mechanics, vol.53, issue.3, pp.726-728, 1996.
DOI : 10.1115/1.3171840

R. V. Nambiar, R. S. Valera, K. L. Lawrence, R. B. Morgan, and D. Et-amil, An algorithm for adaptive refinement of triangular element meshes, International Journal for Numerical Methods in Engineering, vol.29, issue.3, pp.499-509, 1993.
DOI : 10.1002/nme.1620360308

A. Needleman, Inflation of spherical rubber balloons, International Journal of Solids and Structures, vol.13, issue.5, pp.409-421, 1977.
DOI : 10.1016/0020-7683(77)90036-1

H. F. Nied, C. A. Taylor, and H. G. Et-delorenzi, Three-dimensional finite element simulation of thermoforming, Polymer Engineering and Science, vol.27, issue.20, pp.1314-1322, 1990.
DOI : 10.1002/pen.760302009

J. T. Oden and T. Sato, Finite strains and displacements of elastic membranes by the finite element method, International Journal of Solids and Structures, vol.3, issue.4, pp.471-488, 1967.
DOI : 10.1016/0020-7683(67)90002-9

R. W. Ogden, Large Deformation Isotropic Elasticity - On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.326, issue.1567, pp.565-584, 1972.
DOI : 10.1098/rspa.1972.0026

D. Pamplona, P. Goncalves, M. Davidovich, and H. I. Et-weber, Finite axisymmetric deformations of an initially stressed fluid-filled cylindrical membrane, International Journal of Solids and Structures, vol.38, issue.10-13, pp.2033-2047, 2001.
DOI : 10.1016/S0020-7683(00)00151-7

A. K. Pickett, T. Queckborner, P. D. Luca, and E. Et-haug, An explicit finite element solution for the forming prediction of continuous fibre-reinforced thermoplastic sheets, Composites Manufacturing, vol.6, issue.3-4, pp.237-243, 1995.
DOI : 10.1016/0956-7143(95)95016-R

M. Rachik, J. M. Roelandt, and J. L. Et-batoz, Simulation num??rique du soufflage et du thermoformage des plastiques, Revue Europ??enne des ??l??ments Finis, vol.5, issue.1, pp.187-210, 1994.
DOI : 10.1080/12506559.1994.10511121

N. Rachik, F. Schmidt, N. Reuge, Y. L. Maoult, and F. Et-abbe, Elastomer biaxial characterization using bubble inflation technique. II: Numerical investigation of some constitutive models, Polymer Engineering & Science, vol.41, issue.3, pp.532-541, 2001.
DOI : 10.1002/pen.10750

T. Raible, S. Reese, and P. Et-wriggers, Finite element modeling of orthotropic material behaviour in pneumatic membranes, ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift f??r Angewandte Mathematik und Mechanik, vol.80, issue.S2, pp.408-409, 2000.
DOI : 10.1002/zamm.20000801476

S. Reese and P. Et-wriggers, A finite element method for stability problems in finite elasticity, International Journal for Numerical Methods in Engineering, vol.5, issue.7, pp.1171-1200, 1995.
DOI : 10.1002/nme.1620380706

N. Reuge, F. Schmidt, Y. L. Maoult, M. Rachik, and F. Et-abbe, Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations, Polymer Engineering & Science, vol.66, issue.3, pp.522-531, 2001.
DOI : 10.1002/pen.10749

W. C. Rheinbolt, Numerical analysis of continuation methods for nonlinear structural problems, Computers & Structures, vol.13, issue.1-3, pp.103-113, 1981.
DOI : 10.1016/0045-7949(81)90114-0

E. Riks, An incremental approach to the solution of snapping and buckling problems, International Journal of Solids and Structures, vol.15, issue.7, pp.529-551, 1979.
DOI : 10.1016/0020-7683(79)90081-7

R. S. Rivlin and D. W. Saunders, Large Elastic Deformations of Isotropic Materials. VII. Experiments on the Deformation of Rubber, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.243, issue.865
DOI : 10.1098/rsta.1951.0004

R. Rotinat, N. Chevaugeon, J. P. Regoin, E. Verron, and B. Et-peseux, Soufflage libre de membranesélastomèresmembranesélastomères cylindriques : mesure optique du champ de déformation, Deuxì eme colloque Francophone méthodes et techniques optiques pour l'industrie, 2001.

R. Rotinat, V. Valle, and M. Et-cottron, Three Optical Procedures for Local Large-Strain Measurement, Strain, vol.18, issue.3, pp.89-98, 2001.
DOI : 10.1111/j.1475-1305.2001.tb01237.x

J. Rumbaugh, A. Rodriguez-villa, M. Bellet, J. F. Agassant, R. Jacquemet et al., Object Oriented Modelling and Design Rheological characterization of molten polyethylene with respect to the blow molding process, 1991.

A. Rodriguez-villa, Etude théorique et expérimentale de l'extrusion soufflage de corps creux en polymère, Thèse, ´ Ecole Nationale Supérieure des Mines de Paris, 1997.

A. Sagiv, Inflation of an Axisymmetric Membrane: Stress Analysis, Journal of Applied Mechanics, vol.57, issue.3, pp.682-687, 1990.
DOI : 10.1115/1.2897077

L. R. Schmidt and J. F. Et-carley, Biaxial stretching of heat-softened plastic sheets: Experiments and results, Polymer Engineering and Science, vol.13, issue.1, pp.51-62, 1975.
DOI : 10.1002/pen.760150109

L. R. Schmidt and J. F. Et-carley, Biaxial stretching of heat-softened plastic sheets using an inflation technique, International Journal of Engineering Science, vol.13, issue.6, pp.563-578, 1975.
DOI : 10.1016/0020-7225(75)90091-9

R. Seydel, Practical stability and bifurcation analysis. From equilibrium to chaos, 1994.
DOI : 10.1007/978-1-4419-1740-9

J. Shi and G. F. Et-moita, The post-critical analysis of axisymmetric hyper-elastic membranes by the finite element method, Computer Methods in Applied Mechanics and Engineering, vol.135, issue.3-4, pp.265-281, 1996.
DOI : 10.1016/0045-7825(96)01047-X

S. Shrivastava and J. Et-tang, Large deformation finite element analysis of non-linear viscoelastic membranes with reference to thermoforming, The Journal of Strain Analysis for Engineering Design, vol.28, issue.1, pp.31-51, 1993.
DOI : 10.1243/03093247V281031

S. Sidoroff, Cours sur les grandes transformations, Rapport Techn, 1982.

B. R. Simon, A. S. Kobayashi, D. E. Strandness, and C. A. Et-wiederhielm, Large Deformation Analysis of the Arterial Cross Section, Journal of Basic Engineering, vol.93, issue.2, pp.138-146, 1971.
DOI : 10.1115/1.3425199

T. Sokól and M. Et-witkowski, Some experiences in the equilibrium path determination, Comput. Assist. Mech. Engng. Sci, vol.4, pp.189-208, 1997.

A. J. Spencer, Continuum Physics, Chap. Theory of invariant, pp.239-352, 1971.

A. J. Spencer, Continiuum Theory of the mechanics of fibre reinforced Composite, 1984.

J. T. Tielking and W. W. Et-feng, The Application of the Minimum Potential Energy Principle to Nonlinear Axisymmetric Membrane Problems, Journal of Applied Mechanics, vol.41, issue.2, pp.491-497, 1974.
DOI : 10.1115/1.3423315

L. R. Treloar, The elasticity of a network of long-chain molecules. I, Transactions of the Faraday Society, vol.39, pp.36-64, 1943.
DOI : 10.1039/tf9433900036

E. Verron, Contribution expérimentale et numérique aux procédés de moulage par soufflage et de thermoformage, Thèse de doctorat Ecole Centrale de Nantes, 1997.

E. Verron, R. E. Khayat, A. Derdouri, and B. Et-peseux, Dynamic inflation of hyperelastic spherical membranes, Journal of Rheology, vol.43, issue.5, pp.1083-1097, 1999.
DOI : 10.1122/1.551017
URL : https://hal.archives-ouvertes.fr/hal-01006758

. Ver01a, E. Verron, and G. Et-marckmann, An axisymmetrical B-spline model for the non-linear free inflation of rubberlike membranes, Comput. Meth. Appl. Mech. Engng, vol.190, pp.6271-6289, 2001.

. Ver01b, E. Verron, G. Marckmann, and B. Et-peseux, Dynamic inflation of nonlinear elastic and viscoelastic rubberlike membranes, Int. J. Num. Meth. Engng, vol.50, pp.1233-1251, 2001.

W. Wagner and P. Et-wriggers, A simple method for the calculation of postcritical branches, Engineering Computations, vol.5, issue.2, pp.103-109, 1988.
DOI : 10.1108/eb023727

M. K. Warby and J. R. Et-whiteman, Finite element model of viscoelastic membrane deformation, Computer Methods in Applied Mechanics and Engineering, vol.68, issue.1, pp.33-54, 1988.
DOI : 10.1016/0045-7825(88)90105-3

J. A. Weiss and M. A. Et-puso, Finite element implementation of anisotropic quasi-linear viscoelasticity using a discrete spectrum approximation, J. Biomech. Engng, vol.120, pp.62-70, 1998.

A. Wineman, Large Axisymmetric Inflation of a Nonlinear Viscoelastic Membrane by Lateral Pressure, Transactions of the Society of Rheology, vol.20, issue.2, pp.203-225, 1976.
DOI : 10.1122/1.549410

A. Wineman, On axisymmetric deformations of nonlinear viscoelastic membranes, Journal of Non-Newtonian Fluid Mechanics, vol.4, issue.3, pp.249-260, 1978.
DOI : 10.1016/0377-0257(78)80007-X

A. Wineman, On the simultaneous elongation and inflation of a tubular membrane of BKZ fluid, Journal of Non-Newtonian Fluid Mechanics, vol.6, issue.2, pp.111-125, 1979.
DOI : 10.1016/0377-0257(79)87009-3

P. Wriggers and R. L. Et-taylor, A fully non???linear axisymmetrical membrane element for rubber???like materials, Engineering Computations, vol.7, issue.4, pp.303-310, 1990.
DOI : 10.1108/eb023817

S. G. Wu, G. C. Lee, and N. T. Et-tseng, Nonlinear elastic analysis of blood vessels, J. of Biomech. Engng, vol.106, pp.376-383, 1984.

W. H. Yang and W. W. Et-feng, On Axisymmetrical Deformations of Nonlinear Membranes, Journal of Applied Mechanics, vol.37, issue.4, pp.1002-1011, 1970.
DOI : 10.1115/1.3408651

W. H. Yang and C. H. Lu, General Deformations of Neo-Hookean Membranes, Journal of Applied Mechanics, vol.40, issue.1, pp.7-12, 1973.
DOI : 10.1115/1.3422977

L. Yong, J. A. Nemes, and A. Et-derdouri, Optical 3-D dynamic measurement system and its application to polymer membrane inflation tests, Opt. Lasers Engng, vol.33, pp.261-276, 2000.

N. G. Zamani, D. F. Watt, and M. Et-esteghamatian, Status of the finite element method in the thermoforming process, International Journal for Numerical Methods in Engineering, vol.40, issue.11, pp.2681-2693, 1989.
DOI : 10.1002/nme.1620281112

Q. S. Zheng and A. J. Spencer, Tensors which characterize anisotropies, International Journal of Engineering Science, vol.31, issue.5, pp.679-693, 1993.
DOI : 10.1016/0020-7225(93)90118-E

O. C. Zienkiewiecz and R. L. Taylor, The finite element method. Volume I: Basic formulation and linear problems, 1994.