A. , ]. E. Aamr-daya, T. Langlet, A. Benazzouk, and E. M. Queneudec, Feasibility study of lightweight cement composite containing flax by-product particles: Physico-mechanical properties, Cement and Concrete Composites, pp.957-963, 2008.

A. and ]. C. Abraham, A solution to spontaneous combustion in linseed oil formulations, Polymer Degradation and Stability, vol.54, issue.2-3, pp.157-166, 1999.
DOI : 10.1016/S0141-3910(96)00039-0

A. and N. Nf, 18-421 -Bétons -Mise en place par microtable vibrante, AFNOR, Déc, 1981.

A. and N. Nf, EN 933-2 -Essais pour déterminer les caractéristiques géométriques des granulats -Partie 2 : détermination de la granularité -Tamis de contrôle, 1996.

A. Norme and N. En, 1097-3 -Essais pour déterminer les caractéristiques mécaniques et physiques des granulats -Partie 3 : méthode pour le détermination de la masse volumique en vrac et de la porosité intragranulaire, 1998.

A. and N. Nf, -6 -Méthodes d'essai des mortiers pour maçonnerie. -Partie 6 : détermination de la masse volumique apparente du mortier frais, AFNOR, 1999.
URL : https://hal.archives-ouvertes.fr/hal-01277423

A. Norme and N. En, 1097-6 -Essais pour déterminer les caractéristiques mécaniques et physiques des granulats -Partie 6 : détermination de la masse volumique réelle et du coefficient d'absorption d'eau, AFNOR, 2001.

A. and N. Nf, -18 -Méthodes d'essai des mortiers pour maçonnerie -Partie 18 : détermination du coefficient d'absorption d'eau par capillarité du mortier durci, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01277423

A. Norme and N. En, Méthodes d'essai des pierres naturelles -Détermination des masses volumiques réelle et apparente et des porosités ouvertes et totales, AFNOR, 1936.

A. Norme and N. En, 1097-7 -Essais pour déterminer les caractéristiques mécaniques et physiques des granulats, Partie, vol.7, 2008.

A. , N. Nf, and . Iso, 2010 -Marquages et déclarations environnementaux - Déclarations environnementales de type III -Principes et modes opératoires, AFNOR, 2010. [AFN 10-2] AFNOR, Norme NF EN 15643-1 -Contribution des ouvrages de construction au développement durable -Évaluation de la contribution au développement durable des bâtiments -Partie 1 : cadre méthodologique général, 2010.

. K. Agg-95-]-l and . Aggarwal, Bagasse-reinforced cement composites, Cement and Concrete Composites, pp.107-112, 1995.

V. Agopyan, J. Savastano, V. John, and E. M. Cincotto, Developments on vegetable fibrecement based materials in Sao Paulo, Brazil: an overview, Cement and Concrete Composites, pp.527-536, 2005.

A. , ]. L. Conteville, and C. , Den Hartigh, Les écomatériaux en France : État des lieux et enjeux dans la rénovation thermique des logements, Les Amis de la Terre, 2009.

S. Amziane, A. Perrot, and E. T. Lecompte, A novel settling and structural build-up measurement method, Measurement Science and Technology, vol.19, issue.10, pp.105702-105702, 2008.
DOI : 10.1088/0957-0233/19/10/105702

URL : https://hal.archives-ouvertes.fr/hal-00404742

]. L. Arnaud and E. E. Gourlay, Experimental study of parameters influencing mechanical properties of hemp concretes, Construction and Building Materials, vol.28, issue.1, pp.2012-50
DOI : 10.1016/j.conbuildmat.2011.07.052

W. B. Banks, Water uptake by scots pine sapwood, and its restriction by the use of water repellents, Wood Science and Technology, vol.10, issue.6, pp.271-284, 1973.
DOI : 10.1007/BF00351073

. C. Ben-99-]-j, A. Benezet, and . Benhassaine, Grinding and pozzolanic reactivity of quartz powders, Powder Technology, vol.105, pp.167-171, 1999.

D. P. Bentz, M. A. Peltz, K. A. Snyder, and J. M. Davis, VERDiCT: Viscosity Enhancers Reducing Diffusion in Concrete Technology, Concrete International, vol.31, pp.31-36, 2009.

T. R. Bevan and . Woolley, Hemp lime construction ? A guide to building with hemp lime Composites, 2008.

]. M. Bezjak and E. D. Zvizdi?, Dynamic Measurements of the Thermal Conductivity of Insulators, International Journal of Thermophysics, vol.21, issue.7-8, pp.1467-1478, 2011.
DOI : 10.1007/s10765-011-1025-8

K. Bilba, M. Arsene, and E. A. Ouensanga, Sugar cane bagasse fibre reinforced cement composites. Part I. Influence of the botanical components of bagasse on the setting of bagasse/cement composite, Cement and Concrete Composites, pp.91-96, 2003.
DOI : 10.1016/S0958-9465(02)00003-3

URL : https://hal.archives-ouvertes.fr/hal-00809715

K. Bilba and M. Arsene, Silane treatment of bagasse fiber for reinforcement of cementitious composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1488-1495, 2008.
DOI : 10.1016/j.compositesa.2008.05.013

URL : https://hal.archives-ouvertes.fr/hal-00809830

S. Bohic, P. Weiss, P. Roger, and E. G. Daculsi, Light scattering experiments on aqueous solutions of selected cellulose ethers: contribution to the study of polymer-mineral interactions in a new injectable biomaterial, Journal of Materials Science: Materials in Medicine, vol.12, issue.3, pp.201-205, 2001.
DOI : 10.1023/A:1008902829840

URL : https://hal.archives-ouvertes.fr/inserm-00176536

]. A. Bon-93 and . Bonjean, Le tournesol: économie, origine, histoire, écologie, sélection, p.242, 1993.

E. K. Borgin and . Corbertt, The hydrophobic properties of bark extractives, Wood Science and Technology, vol.14, issue.3, pp.190-199, 1971.
DOI : 10.1007/BF00353681

A. Bouguerra, A. Ledhem, F. De-barquin, R. M. Dheilly, and E. M. Quéneudec, Effect of microstructure on the mechanical and thermal properties of lightweight concrete prepared from clay, cement, and wood aggregates, Cement and Concrete Research, vol.28, issue.8, pp.1179-1190, 1998.
DOI : 10.1016/S0008-8846(98)00075-1

P. Boustingorry, Elaboration d'un matériau composite à matrice gypse et renfort bois fragmenté -Amélioration de la résistance au vissage de produits préfabriqués en gypse, Thèse de Doctorat, ENSM St Etienne ? INP Grenoble, 2002.

P. Bouloc, S. Allegret, and L. Arnaud, Le chanvre industriel : Production et utilisations, 2006.
DOI : 10.1051/mattech/2011134

M. P. Boutin, C. Flamin, S. Quinton, and G. Gosse, Etude des caractéristiques environnementales du chanvre par son analyse de cycle de vie, Ministère de l'agriculture et de la pêche Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering, Composite Structures, vol.86, pp.3-9, 2006.

G. H. Bruntland, Rapport Bruntland ? Notre avenir à tous, Commission mondiale sur l'environnement et le développement des Nations Unies, 1987.

L. E. Bruyne, D. Bülichen, J. Kainz, and E. J. Plank, Manufacturing systems [BRU 11] C. Brumaud, Origines microscopiques des conséquences rhéologiques de l'ajout d'éthers de cellulose dans une suspension cimentaireWorking mechanism of methyl hydroxyethyl cellulose (MHEC) as water retention agent, Thèse de doctorat Thèse de doctorat, pp.953-959, 2008.

N. J. Carino and H. S. Lew, Maturation time -application and method, Actes du congrès Structures Congress & Exposition, pp.21-23

M. Carrier, A. Loppinet-serani, D. Denux, J. Lasnier, F. Ham-pichavant et al., Thermogravimetric analysis as a new method to determine the lignocellulosic composition of biomass, Biomass and Bioenergy, vol.35, issue.1, pp.298-307, 2011.
DOI : 10.1016/j.biombioe.2010.08.067

URL : https://hal.archives-ouvertes.fr/hal-00553239

C. A. Chatjigakis, N. Pappas, O. Proxenia, P. Kalantzi, E. M. Rodis et al., FT-IR spectroscopic determination of the degree of esterification of cell wall pectins from stored peaches and correlation to textural changes, Carbohydrate Polymers, vol.37, issue.4, pp.395-408, 1998.
DOI : 10.1016/S0144-8617(98)00057-5

S. Charoenvai, J. Khedari, J. Hirunlabh, C. Asasutjarit, B. Zeghmati et al., Heat and moisture transport in durian fiber based lightweight construction materials, Solar Energy, vol.78, issue.4, pp.543-553, 2005.
DOI : 10.1016/j.solener.2004.03.013

J. Chamoin, F. Collet, and S. Pretot, Optimisation de bétons de chanvre projetés et moulés ? Caractérisation du matériau de référence, Actes du 26 ème congrès de l'AUGC, pp.4-6, 2008.

M. Chabannes, Valorisation de granulats de tournesol pour la formulation de matériaux de construction, Mémoire de master II, p.112, 2012.

P. Coatanlem, R. Jauberthie, and E. F. , Lightweight wood chipping concrete durability, Construction and Building Materials, vol.20, issue.9, pp.776-781, 2006.
DOI : 10.1016/j.conbuildmat.2005.01.057

H. Cochard, Cavitation in trees, Comptes Rendus Physique, vol.7, issue.9-10, pp.1018-1026, 2006.
DOI : 10.1016/j.crhy.2006.10.012

URL : https://hal.archives-ouvertes.fr/hal-01189232

F. Collet, M. Bart, L. Serres, and E. J. Miriel, Porous structure and water vapour sorption of hemp-based materials, Construction and Building Materials, vol.22, issue.6, pp.1271-1280, 2008.
DOI : 10.1016/j.conbuildmat.2007.01.018

URL : https://hal.archives-ouvertes.fr/hal-00705133

R. S. Coutts and E. P. Kightly, Bonding in wood fibre-cement composites, Journal of Materials Science, vol.15, issue.10, pp.3355-3359, 1984.
DOI : 10.1007/BF00549827

R. S. Coutts, A review of Australian research into natural fibre cement composites, Cement and Concrete Composites, pp.518-526, 2005.
DOI : 10.1016/j.cemconcomp.2004.09.003

K. P. De-bruijn, K. Jeppsson, E. C. Sandin, and . Nilsson, Mechanical properties of lime???hemp concrete containing shives and fibres, Biosystems Engineering, vol.103, issue.4, pp.474-479, 2009.
DOI : 10.1016/j.biosystemseng.2009.02.005

P. G. De-gennes, F. Brochard-wyard, D. Quéré, and E. A. Reisinger, Capillarity and wetting phenomena : drops, bubbles, pearls, waves, p.291, 2004.
DOI : 10.1007/978-0-387-21656-0

J. R. Del-viso, J. R. Carmona, and E. G. Ruiz, Shape and size effects on the compressive strength of high-strength concrete, Cement and Concrete Research, vol.38, issue.3, pp.386-395, 2008.
DOI : 10.1016/j.cemconres.2007.09.020

M. F. Demirbas, Thermal Energy Storage and Phase Change Materials: An Overview, Energy Sources, Part B: Economics, Planning, and Policy, vol.69, issue.1, pp.85-95, 2006.
DOI : 10.1016/S1359-4311(02)00192-8

E. S. Diamond and . Huang, The ITZ in concrete ??? a different view based on image analysis and SEM observations, Cement and Concrete Composites, pp.179-188, 2001.
DOI : 10.1016/S0958-9465(00)00065-2

]. P. Diederich, M. Mouret, and F. Ponchon, Design of Self-compacting Concrete According to the Nature of the Limestone Filler, Actes du congrès SCI, pp.137-147, 2010.

J. Dorado, G. Almendros, J. A. Field, and R. Sierra-alvarez, Infrared spectroscopy analysis of hemp (Cannabis sativa) after selective delignification by Bjerkandera sp. at different nitrogen levels, Enzyme and Microbial Technology, vol.28, issue.6, pp.550-559, 2001.
DOI : 10.1016/S0141-0229(00)00363-X

]. R. Dron, L'activité pouzzolanique, Bulletin de liaison Laboratoire des Ponts et Chaussées, vol.93, pp.66-69, 1978.

V. M. Dronnet, C. M. Renard, M. A. Axelos, and J. Thibault, Characterisation and selectivity of divalent metal ions binding by citrus and sugar-beet pectins, Carbohydrate Polymers, vol.30, issue.4, pp.253-263, 1996.
DOI : 10.1016/S0144-8617(96)00107-5

A. Dupraz, T. P. Nguyen, M. Richard, G. Daculsi, and E. N. Passuti, Influence of a cellulosic ether carrier on the structure of biphasic calcium phosphate ceramic particles in an injectable composite material, Biomaterials, vol.20, issue.7, pp.663-673, 1999.
DOI : 10.1016/S0142-9612(98)00222-1

R. Eires, J. P. Nunes, R. Fangueiro, S. Jalali, and A. Camões, New eco-friendly hybrid composite materials for civil construction, Proceedings of the 12th European conference on Composite Materials, Biarritz, 29 Aout-1 Septembre, 2006.

S. Elfordy, F. Lucas, F. Tancret, Y. Scudeller, and E. L. Goudet, Mechanical and thermal properties of lime and hemp concrete (???hempcrete???) manufactured by a projection process, Construction and Building Materials, vol.22, issue.10, pp.2116-2123, 2008.
DOI : 10.1016/j.conbuildmat.2007.07.016

R. M. Hajj, Z. Dheilly, M. L. Aboura, M. Benzeggagh, and . Queneudec, Procédé de fabrication des composites 100% végétaux : Effet de la granulométrie des étoupes de lin et de l'ajout des bios liants, ELH Juin, vol.10, issue.14, pp.10-12, 2009.

. H. Emm-96-]-p, A. M. Emmons, and . Vaysburd, System concept in design and construction of durable concrete repairs, Construction and Building Materials, vol.10, pp.69-75, 1996.

A. Evrard, Bétons de chaux et de chanvre : Phénomènes de transferts de chaleur et de masse & Comportement sous des sollicitations dynamiques, 2005.

A. Evrard, Transient hygrothermal behaviour of lime-hemp materials, Thèse de doctorat, p.19675, 2008.

D. Fakin, V. Golob, K. Stana-kleinschek, and A. , Sorption Properties of Flax Fibers Depending on Pretreatment Processes and their Environmental Impact, Textile Research Journal, vol.11, issue.1, pp.448-454
DOI : 10.1177/0040517506062767

L. Fang, G. Clausen, and P. O. Fanger, Impact of Temperature and Humidity on the Perception of Indoor Air Quality, Indoor Air, vol.42, issue.2, pp.80-90, 1998.
DOI : 10.1202/0002-8894(1989)050<0188:EOTCOT>2.0.CO;2

M. Fournier and J. Geoffray, Le liant pozzolanes-chaux, Bulletin de liaison Laboratoire des Ponts et Chaussées, pp.70-78, 1978.

. Fre-85-]-p.-freiesleben, E. J. Hansen, and . Pedersen, Curing of Concrete Structures, CEB Bulletin, vol.166, issue.42, 1985.

S. Frybort, R. Mauritz, A. Teischinger, and E. U. Müller, Wood Adhesion and AdhesivesCement bonded composites -A mechanical review, Handbook of Wood Chemistry and Wood Composites, pp.602-626, 2005.

. J. Gar-91-]-d, N. C. Gardner, D. W. Generalla, M. P. Gunnells, and . Wolcott, Dynamic wettability of wood, Langmuir, vol.7, issue.11, pp.2498-2502, 1991.

D. C. Garcia-jaldon, M. R. Dupeyre, and . Vignon, Fibres from semi-retted hemp bundles by steam explosion treatment, Biomass and Bioenergy, vol.14, issue.3, pp.251-260, 1998.
DOI : 10.1016/S0961-9534(97)10039-3

URL : https://hal.archives-ouvertes.fr/hal-00302500

. J. Gar-08-]-d and . Gardner, Adhesion Mechanisms of Durable Wood Adhesive Bonds, Characterization of the Cellulosic Cell Wall, pp.254-265, 2008.

R. K. Ghavami, N. P. Toledo-filho, and . Barbosa, Behaviour of composite soil reinforced with natural fibres, Cement and Concrete Composites, pp.39-48, 1999.
DOI : 10.1016/S0958-9465(98)00033-X

Z. Giergiczny, system, Journal of Thermal Analysis and Calorimetry, vol.76, issue.3, pp.747-754, 2004.
DOI : 10.1023/B:JTAN.0000032259.80031.b2

S. Goyer, Caractérisation des propriétés microstructurales et hydriques de bétons légers. Application à la modélisation des transferts hydriques, 2007.

. E. Gra-88-]-h and . Gram, Durability of natural fibres in concrete Natural fibre reinforced cement and concrete, pp.143-172, 1988.

E. C. Groot and . Larbi, The influence of water flow (reversal) on bond strength development in young masonry, pp.63-77, 1999.

]. E. Guyon, A. Pedregosa, and B. Salviat, Matière et matériaux ? De quoi est fait le monde ?, Editions Belin, p.336, 2010.

M. Hachmi, A. A. Moslemi, and A. G. Campbell, A new technique to classify the compatibility of wood with cement, Wood Science and Technology, vol.24, issue.4, pp.345-354, 1990.
DOI : 10.1007/BF00227055

E. Hirst, P. Walker, K. Paine, and T. Yates, Characterisation of Low Density Hemp-Lime Composite Building Materials under Compression Loading, Actes de la 2 ème conférence Internationale sur les Matériaux et Technologies de la construction durable, pp.28-30, 2010.

A. D. Hofstrand, A. A. Moslemi, and J. F. Garcia, Curing characteristics of wood particles from 9 northern rockys mountain species mixed with portland cement, Forest Products Journal, vol.34, pp.57-61, 1984.

C. Igathinathane, L. O. Pordesimo, E. P. Columbus, W. D. Batcheloret, and S. R. Methuku, Shape identification and particles size distribution from basic shape parameters using ImageJ, Computers and Electronics in Agriculture, vol.63, issue.2, pp.168-182, 2008.
DOI : 10.1016/j.compag.2008.02.007

C. Igathinathane, L. O. Pordesimo, E. P. Columbus, W. D. Batcheloret, and S. Sokhansanj, Sieveless particle size distribution analysis of particulate materials through computer vision, Computers and Electronics in Agriculture, vol.66, issue.2, pp.147-158, 2009.
DOI : 10.1016/j.compag.2009.01.005

M. Paggi, Specimen shape and the problem of contact in the assessment of concrete compressive strength, Materials and Structures, vol.41, pp.431-441, 2008.

A. Izaguirre, J. Lanas, and J. I. Álvarez, Behaviour of a starch as a viscosity modifier for aerial lime-based mortars, Carbohydrate Polymers, vol.80, issue.1, pp.222-228, 2010.
DOI : 10.1016/j.carbpol.2009.11.010

E. G. Jackson and . Grace, Cavitation and water transport in trees, Endeavour, vol.18, issue.2, pp.50-54, 1994.
DOI : 10.1016/0160-9327(94)90062-0

E. L. Jimenez and . Lopez, Characterization of paper sheets from agriculturalresidues, Wood and Science technology, vol.27, pp.468-474, 1993.

F. P. Jouffret, E. J. Labalette, and . Thibierge, Atouts et besoins en innovations du tournesol pour une agriculture durable, Innovations Agronomiques, vol.14, pp.1-17, 2011.

S. R. Karade, M. Irle, and E. K. Maher, Einfluss der Eigenschaften und des Anteils von Korkgranulat auf die Kork-Zement-Kompatibilit??t, Holz als Roh- und Werkstoff, vol.14, issue.12, pp.281-286, 2006.
DOI : 10.1007/s00107-006-0103-2

M. Khazma, N. Hajj, A. Goullieux, R. M. Dheilly, and E. M. Queneudec, Influence of sucrose addition on the performance of a lignocellulosic composite with a cementious matrix, Composites Part A: Applied Science and Manufacturing, vol.39, issue.12, pp.1901-1908, 2008.
DOI : 10.1016/j.compositesa.2008.09.014

M. Khazma, A. Goullieux, R. Dheilley, and M. T. Kint, The use of modified flax shives in cementitious composites and the repercussion of these modifications on their behaviour in the cement matrix, Proceedings of International conference on flax and other bast fibres, pp.20-24

J. Khedari, B. Suttisonk, N. Pratinthong, and E. J. Hirunlabh, New lightweight composite construction materials with low thermal conductivity, Cement and Concrete Composites, pp.65-70, 2001.
DOI : 10.1016/S0958-9465(00)00072-X

N. P. Khristova, E. S. Yossifov, and . Gabir, Particle board from sunflower stalks: Preliminary trials, Bioresource Technology, vol.58, issue.3, pp.319-321, 1996.
DOI : 10.1016/S0960-8524(96)00112-5

E. E. Knapen and . Van-gemert, Cement hydration and microstructure formation in the presence of water-soluble polymers, Cement and Concrete Research, vol.39, issue.1, pp.6-13, 2009.
DOI : 10.1016/j.cemconres.2008.10.003

. J. Kni-03-]-c, J. F. Knill, and . Kennedy, Degradation of cellulose under alkaline conditions, Carbohydrate Polymers, vol.51, pp.281-300, 2003.

J. C. Krapez, Mesure de l'effusivité thermique -Méthodes par contact, p.22, 2007.

A. Kriker, G. Debicki, A. Bali, M. Khenfer, and E. M. Chabannet, Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate, Cement and Concrete Composites, pp.554-564, 2005.
DOI : 10.1016/j.cemconcomp.2004.09.015

A. Kriker, A. Bali, G. Debicki, M. Bouziane, and E. M. Chabannet, Durability of date palm fibres and their use as reinforcement in hot dry climates, Cement and Concrete Composites, pp.639-648, 2008.
DOI : 10.1016/j.cemconcomp.2007.11.006

Q. J. Laskowski, C. O. Liu, and . Connor, Current understanding of the mechanism of polysaccharide adsorption at the mineral/aqueous solution interface, International Journal of Mineral Processing, vol.84, issue.1-4, pp.59-68, 2007.
DOI : 10.1016/j.minpro.2007.03.006

C. Laumonier, N. Roudil, and M. Colombard-prout, Le rôle des artisans dans la diffusion des meilleurs techniques énergétiques possibles, CSTB, 2007.

J. P. Laurent, Evaluation des param??tres thermiques d'un milieu poreux: optimisation d'outils de mesure ???in situ???, International Journal of Heat and Mass Transfer, vol.32, issue.7, pp.1247-1259, 1989.
DOI : 10.1016/0017-9310(89)90026-4

M. Lazzari and E. O. Chiantore, Drying and oxidative degradation of linseed oil, Polymer Degradation and Stability, vol.65, issue.2, pp.303-313, 1999.
DOI : 10.1016/S0141-3910(99)00020-8

M. Lazghab, K. Saleh, and P. Guigon, Etude de l'hydrophobisation par un traitement chimique de solides divisés en phase organique et phase sèche en lit fluidisé, Récents progrès en Génie des Procédés, vol.9210, issue.04, 2005.

T. Le-ngoc-huyen, M. Queneudec-t-'kint, C. Remond, B. Chabbert, and R. Dheilly, Saccharification of Miscanthus x giganteus, incorporation of lignocellulosic by-product in cementitious matrix, Comptes Rendus Biologies, vol.334, issue.11, pp.837-838, 2011.
DOI : 10.1016/j.crvi.2011.07.008

N. Leklou, J. Aubert, and G. Escadeillas, Microscopic observations of samples affected by delayed ettringite formation (DEF), Materials and Structures, vol.40, issue.3, pp.1369-1378, 2009.
DOI : 10.1617/s11527-008-9456-9

URL : https://hal.archives-ouvertes.fr/hal-01007045

. Krausz, Influence of various chemical treatments on the composition and structure of hemp fibres, Composites Part A: Applied Science and Manufacturing, vol.39, pp.514-522, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00267797

M. L. Troedec, C. S. Peyratout, A. Smith, and T. Chotard, Influence of various chemical treatments on the interactions between hemp fibres and a lime matrix, Journal of the European Ceramic Society, vol.29, issue.10, pp.1861-1868, 2009.
DOI : 10.1016/j.jeurceramsoc.2008.11.016

URL : https://hal.archives-ouvertes.fr/hal-00631601

M. L. Troëdec, A. Rachini, C. Peyratout, S. Rossignol, E. Max et al., Influence of chemical treatments on adhesion properties of hemp fibres, Journal of Colloid and Interface Science, vol.356, issue.1, pp.303-310, 2011.
DOI : 10.1016/j.jcis.2010.12.066

]. Y. Li-00, Y. Li, E. L. Mai, and . Ye, Sisal fibre and its composites: a review of recent developments, Composites Science and Technology, vol.60, issue.11, pp.2037-2055, 2000.
DOI : 10.1016/S0266-3538(00)00101-9

Q. Liu, Y. Zhang, and J. S. Laskowski, The adsorption of polysaccharides onto mineral surfaces: an acid/base interaction, International Journal of Mineral Processing, vol.60, issue.3-4, pp.229-245, 2000.
DOI : 10.1016/S0301-7516(00)00018-1

H. Z. Lo and . Cui, Effect of porous lightweight aggregate on strength of concrete, Materials Letters, vol.58, issue.6, pp.916-919, 2004.
DOI : 10.1016/j.matlet.2003.07.036

A. Loukili, D. Chopin, A. Khelidj, and J. Touzo, A new approach to determine autogenous shrinkage of mortar at an early age considering temperature history, Cement and Concrete Research, vol.30, issue.6, pp.915-922, 2000.
DOI : 10.1016/S0008-8846(00)00241-6

E. P. Lura and . Jensen, Measuring techniques for autogenous strain of cement paste, Materials and Structures, vol.93, issue.6, pp.431-440, 2007.
DOI : 10.1617/s11527-006-9180-2

. F. Massazza, Structure of pozzalana and fly-ash and the hydration of pozzolanic and fly-ash cements, 1974.

R. J. Millet, I. A. Hommey, and . Voinovitch, Etude minéralogique des pâtes pouzzolanes chaux, Bulletin de liaison Laboratoire des Ponts et Chaussées, pp.59-63, 1974.

A. J. Millet, R. Fournier, and . Sierra, Rôle des chaux industrielles dans leur emplois avec les matériaux à caractère pouzzolanique, Bulletin de liaison Laboratoire des Ponts et Chaussées, vol.83, pp.91-98, 1976.

]. B. Mohr, H. Nanko, and E. K. Kurtis, Durability of kraft pulp fiber???cement composites to wet/dry cycling, Cement and Concrete Composites, pp.435-448, 2005.
DOI : 10.1016/j.cemconcomp.2004.07.006

]. B. Mohr, J. Biernacki, and E. K. Kurtis, Microstructural and chemical effects of wet/dry cycling on pulp fiber???cement composites, Cement and Concrete Research, vol.36, issue.7, pp.1240-1251, 2006.
DOI : 10.1016/j.cemconres.2006.03.020

M. Y. Mollah, W. Yu, R. Schennach, and D. L. Cocke, A Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate, Cement and Concrete Research, vol.30, issue.2, pp.267-273, 2000.
DOI : 10.1016/S0008-8846(99)00243-4

P. Monreal, L. B. Mboumba-mamboundou, R. M. Dheilly, and M. Queneudec, Evaluation de l'efficacité des traitements physicochimiques sur les performances mécaniques des bétons lignocellulosiques confectionnés à partir de pulpes de betterave, Actes du congrès Orgagec'08, pp.27-29

L. P. Monreal, R. M. Mboumba-mamboundou, E. M. Dheilly, and . Quéneudec, Effects of aggregate coating on the hygral properties of lignocellulosic composites, Cement and Concrete Composites, pp.301-308, 2011.
DOI : 10.1016/j.cemconcomp.2010.10.017

D. R. Morgan, Compatibility of concrete repair materials and systems, Construction and Building Materials, vol.10, issue.1, pp.57-67, 1996.
DOI : 10.1016/0950-0618(95)00060-7

J. A. Moslemi, A. D. Garcia, and . Hofstrand, Effect of various treatments and additives on wood -portland cement -water systems, Wood and Fiber Science, vol.15, pp.164-176, 1983.

P. Mounanga, P. Poullain, G. Bastian, P. Glouannec, and H. Khelifi, Influence de la composition et du mode de mise en oeuvre sur le développement des propriétés mécaniques du béton de chanvre, Actes du 27ème congrès de l'AUGC, Saint-Malo, 3-5 Juin, 2009.

P. F. Murphy, S. Walker, and R. , An assesment of the physical properties of lime-hemp concrete, Actes du congrès 5th Bridge & Infrastructure Research in Ireland Conference (BCRI2010), pp.2-3, 2010.

]. E. Nagele, The zeta-potential of cement, Cement and Concrete Research, vol.15, issue.3, pp.453-462, 1985.
DOI : 10.1016/0008-8846(85)90118-8

M. Nardin and E. J. Schultz, Theories and Mechanisms of Adhesion, Handbook of Adhesive Technology, 2003.
DOI : 10.1201/9780203912225.pt2

A. M. Nazar, F. A. Silva, and J. J. Ammann, Image processing for particle characterization, Materials Characterization, vol.36, issue.4-5, pp.165-173, 1999.
DOI : 10.1016/S1044-5803(96)00044-7

]. T. Nguyen, V. Picandet, S. Amziane, and C. Baley, Influence of compactness and hemp hurd characteristics on the mechanical properties of lime and hemp concrete, European Journal of Environmental and Civil Engineering, vol.13, issue.9, pp.1039-1050, 2009.
DOI : 10.1016/0141-8130(96)81852-6

URL : https://hal.archives-ouvertes.fr/hal-00404075

T. T. Nguyen, V. Picandet, P. Carre, T. Lecompte, S. Amziane et al., Effect of compaction on mechanical and thermal properties of hemp concrete, European Journal of Environmental and Civil Engineering, vol.36, issue.5, pp.545-560, 2010.
DOI : 10.1007/s002260050130

URL : https://hal.archives-ouvertes.fr/hal-00494115

K. J. Niklas and H. Spatz, Worldwide correlations of mechanical properties and green wood density, American Journal of Botany, vol.97, issue.10, pp.1587-1594, 2010.
DOI : 10.3732/ajb.1000150

]. V. Nozahic, S. Amziane, G. Torrent, K. Saïdi, and H. D. Baynast, Design of green concrete made of plant-derived aggregates and a pumice???lime binder, Cement and Concrete Composites, pp.231-241, 2012.
DOI : 10.1016/j.cemconcomp.2011.09.002

URL : https://hal.archives-ouvertes.fr/hal-00715670

V. Nozahic and S. Amziane, Influence of sunflower aggregates surface treatments on physical properties and adhesion with a mineral binder, Composites Part A: Applied Science and Manufacturing, vol.43, issue.11
DOI : 10.1016/j.compositesa.2012.07.011

J. P. Ollivier, J. C. Maso, and E. B. Bourdette, Interfacial transition zone in concrete, Advanced Cement Based Materials, vol.2, issue.1, pp.30-38, 1995.
DOI : 10.1016/1065-7355(95)90037-3

H. Paiva, L. P. Esteves, P. B. Cachim, and V. M. Ferreira, Rheology and hardened properties of single-coat render mortars with different types of water retaining agents, Construction and Building Materials, vol.23, issue.2, pp.1141-1146, 2009.
DOI : 10.1016/j.conbuildmat.2008.06.001

M. Palacios, F. Puertas, P. Bowen, and Y. F. Houst, Effect of PCs superplasticizers on the rheological properties and hydration process of slag-blended cement pastes, Journal of Materials Science, vol.12, issue.269, pp.2714-2723, 2009.
DOI : 10.1007/s10853-009-3356-4

L. Patural, P. Marchal, A. Govin, P. Grosseau, B. Ruot et al., Cellulose ethers influence on water retention and consistency in cement-based mortars, Cement and Concrete Research, vol.41, issue.1, pp.46-55, 2011.
DOI : 10.1016/j.cemconres.2010.09.004

URL : https://hal.archives-ouvertes.fr/hal-00542980

S. Pavía and E. Treacy, A comparative study of the durability and behaviour of fat lime and feebly-hydraulic lime mortars, Materials and Structures, vol.30, issue.3, pp.391-398, 2006.
DOI : 10.1617/s11527-005-9033-4

S. Pavía and E. R. Hanley, Flexural bond strength of natural hydraulic lime mortar and clay brick, Materials and Structures, vol.4, issue.2, pp.913-922, 2010.
DOI : 10.1617/s11527-009-9555-2

J. Paya, J. Monza, M. V. Borrachero, and E. S. Velazquez, Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R). Thermogravimetric analysis studies on FC3R-Portland cement pastes, Cement and Concrete Research, vol.33, issue.4, pp.603-609, 2003.
DOI : 10.1016/S0008-8846(02)01026-8

B. M. Pejic, M. M. Kostic, P. D. Skundric, and J. Z. Praskalo, The effects of hemicelluloses and lignin removal on water uptake behavior of hemp fibers, Bioresource Technology, vol.99, issue.15, pp.7152-7159, 2008.
DOI : 10.1016/j.biortech.2007.12.073

A. Peschard, A. Govin, P. Grosseau, B. Guilhot, and E. R. Guyonnet, Effect of polysaccharides on the hydration of cement paste at early ages, Cement and Concrete Research, vol.34, issue.11, pp.2153-2158, 2004.
DOI : 10.1016/j.cemconres.2004.04.001

URL : https://hal.archives-ouvertes.fr/hal-00124310

. Guilhot, Effect of polysaccharides on the hydration of cement suspension, Journal of the European Ceramic Society, vol.26, pp.1439-1445, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00436162

. J. Pourchez, Aspects physico-chimiques de l'interaction des éthers de cellulose avec la matrice cimentaire, 2006.

J. Pourchez, A. Govin, P. Grosseau, R. Guyonnet, B. Guilhot et al., Alkaline stability of cellulose ethers and impact of their degradation products on cement hydration, Cement and Concrete Research, vol.36, issue.7, pp.1252-1256, 2006.
DOI : 10.1016/j.cemconres.2006.03.028

URL : https://hal.archives-ouvertes.fr/emse-00449712

J. Pourchez, B. Ruot, J. Debayle, E. Pourchez, and E. P. Grosseau, Some aspects of cellulose ethers influence on water transport and porous structure of cement-based materials, Cement and Concrete Research, vol.40, issue.2, pp.242-252, 2010.
DOI : 10.1016/j.cemconres.2009.09.028

URL : https://hal.archives-ouvertes.fr/hal-00464184

B. Printz, G. Le-brenn, C. Dattas, and F. Bedard, Elaboration d'un Agrobéton : Choix de végétaux en région Auvergne et susceptibles de répondre aux exigences du matériau recherché, Projet étudiant Master, vol.2, 2010.

A. Puri, A. Badanoiu, and E. G. Voicu, Eco-friendly material based on fly ash, Revue Roumaine de Chimie, vol.53, pp.1069-1076, 2008.

M. Ralet, V. Dronnet, H. C. Buchholt, and E. J. Thibault, Enzymatically and chemically de-esterified lime pectins: characterisation, polyelectrolyte behaviour and calcium binding properties, Carbohydrate Research, vol.336, issue.2, pp.117-125, 2001.
DOI : 10.1016/S0008-6215(01)00248-8

URL : https://hal.archives-ouvertes.fr/hal-01440018

P. S. Ramirez-arellanes, F. Cano-barrita, E. C. Julian-caballero, and . Gomez-yanez, Concrete Durability Properties and Microstructural Analysis of Cement Pastes with Nopal Cactus Mucilage as a Natural Additive, 2012.

H. P. Raven and . Curtis, Biology of plants, p.706, 1970.

J. Rilling, La construction intelligente en énergie ? Sciences, Technologies et Société, Sciences et devenir de l'homme -Les Cahiers du M, U.R.S, 2006.

]. B. River, C. Vick, and E. R. Gillepsie, Wood as an adherendMoisture properties, Treatise on adhesion and adhesives Handbook Of Wood Chemistry And Wood Composites, p.21, 1991.

H. Savastano and V. Agopyan, Transition zone studies of vegetable fibre-cement paste composites, Cement and Concrete Composites, pp.49-57, 1999.
DOI : 10.1016/S0958-9465(98)00038-9

H. Savastano, P. G. Warden, and R. S. Coutts, Brazilian waste fibres as reinforcement for cement-based composites, Cement and Concrete Composites, pp.379-384, 2000.
DOI : 10.1016/S0958-9465(00)00034-2

H. Savastano, P. G. Warden, and R. S. Coutts, Ground iron blast furnace slag as a matrix for cellulose-cement materials, Cement and Concrete Composites, pp.389-397
DOI : 10.1016/S0958-9465(00)00083-4

H. Savastano, V. John, V. Agopyan, and E. O. Ferreira, Weathering of vegetable fibre-clinker free cement composites, Materials and Structures, vol.35, issue.245, pp.64-68, 2002.
DOI : 10.1617/13671

E. H. Schwiete and E. U. Ludwig, Crystal structure and properties of cement hydration products (hydrates calcium aluminates and ferrites, Actes du 5ème symposium sur la chimie du ciment, p.37, 1968.

D. Sedan, C. Pagnoux, T. Chotard, A. Smith, V. Lejolly et al., Effect of calcium rich and alkaline solutions on the chemical behaviour of hemp fibres, Journal of Materials Science, vol.89, issue.2, pp.9336-9342, 2007.
DOI : 10.1007/s10853-007-1903-4

URL : https://hal.archives-ouvertes.fr/hal-00203555

D. Sedan, C. Pagnoux, A. Smith, and T. Chotard, Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction, Journal of the European Ceramic Society, vol.28, issue.1, pp.183-192, 2008.
DOI : 10.1016/j.jeurceramsoc.2007.05.019

URL : https://hal.archives-ouvertes.fr/hal-00272229

K. E. Semple, R. B. Cunningham, and P. D. Evans, The suitability of five Western Australian mallee eucalypt species for wood???cement composites, Industrial Crops and Products, vol.16, issue.2, pp.89-100, 2002.
DOI : 10.1016/S0926-6690(02)00012-2

V. R. Sersale, G. L. Sabatelli, and . Valenti, Influence of some retarders on the hydration, at early ages, of tricalcium aluminate, Actes du 7ème congrès International sur la Chimie du Ciment, pp.546-552, 1980.

E. Sharmin, S. M. Ashraf, and E. S. Ahmad, Synthesis, characterization, antibacterial and corrosion protective properties of epoxies, epoxy-polyols and epoxy-polyurethane coatings from linseed and Pongamia glabra seed oils, International Journal of Biological Macromolecules, vol.40, issue.5, pp.407-422, 2007.
DOI : 10.1016/j.ijbiomac.2006.10.002

]. C. Shi-95, R. L. Shi, and . Day, Acceleration of the reactivity of fly ash by chemical activation, Cement and Concrete Research, vol.25, issue.1, pp.15-21, 1995.
DOI : 10.1016/0008-8846(94)00107-A

T. Shimizu and E. E. Kenndler, Capillary electrophoresis of small solutes in linear polymer solutions: Relation between ionic mobility, diffusion coefficient and viscosity, Electrophoresis, vol.20, issue.17, pp.3364-3372, 1999.
DOI : 10.1002/(SICI)1522-2683(19991101)20:17<3364::AID-ELPS3364>3.3.CO;2-O

C. Shi and R. L. Day, Pozzolanic reaction in the presence of chemical activators, Cement and Concrete Research, vol.30, issue.1, pp.51-58, 2000.
DOI : 10.1016/S0008-8846(99)00205-7

]. C. Shi and R. L. Day, Pozzolanic reaction in the presence of chemical activators, Cement and Concrete Research, vol.30, issue.4, pp.607-613, 2000.
DOI : 10.1016/S0008-8846(00)00214-3

C. Shi and R. L. Day, Comparison of different methods for enhancing reactivity of pozzolans, Cement and Concrete Research, vol.31, issue.5, pp.813-818, 2001.
DOI : 10.1016/S0008-8846(01)00481-1

D. A. Silva, H. R. Wenk, and P. J. Monteiro, Comparative investigation of mortars from Roman Colosseum and cistern, Thermochimica Acta, vol.438, issue.1-2, pp.35-40, 2005.
DOI : 10.1016/j.tca.2005.03.003

H. Sleiman, A. Perrot, and E. S. Amziane, A new look at the measurement of cementitious paste setting by Vicat test, Cement and Concrete Research, vol.40, issue.5, pp.681-686, 2010.
DOI : 10.1016/j.cemconres.2009.12.001

URL : https://hal.archives-ouvertes.fr/hal-00494125

S. Srinivasan, S. A. Barbhuiya, D. Charan, and S. P. Pandey, Characterising cement???superplasticiser interaction using zeta potential measurements, Construction and Building Materials, vol.24, issue.12, pp.2517-2521, 2010.
DOI : 10.1016/j.conbuildmat.2010.06.005

. J. Sta-69-]-a, W. E. Stamm, and . Smith, Laminar sorption and swelling theory for wood and cellulose, Wood Science and Technology, vol.3, pp.301-323, 1969.

R. Sudin and N. Swamy, Bamboo and wood fibre cement composites for sustainable infrastructure regeneration, Journal of Materials Science, vol.1, issue.1 & 2, pp.6917-6924, 2006.
DOI : 10.1007/s10853-006-0224-3

. Sugo, The developpement of mortar/unit bond, Actes du congrès 9th Canadian Masonry 309 symposium, pp.4-6, 2001.

A. S. Taha, M. A. Serry, and H. El-didamony, Hydration characteristics of metakaolin???lime???gypsum, Thermochimica Acta, vol.90, pp.287-296, 1985.
DOI : 10.1016/0040-6031(85)87106-9

N. L. Thomas and J. D. Birchall, The retarding action of sugars on cement hydration, Cement and Concrete Research, vol.13, issue.6, pp.830-842, 1983.
DOI : 10.1016/0008-8846(83)90084-4

. D. Tol-00-]-r, K. Toledo-filho, G. L. Scrivener, E. K. England, and . Ghavami, Durability of alkalisensitive sisal and coconut fibres in cement mortar composites, Cement and Concrete Composites, pp.127-143, 2000.

. D. Tol-03-]-r, K. Toledo-filho, G. L. Ghavami, E. K. England, and . Scrivener, Development of vegetable fibre-mortar composites of improved durability, Cement and Concrete Composites, pp.185-196, 2003.

]. G. Tonoli, H. Savastano-jr, E. Fuente, C. Negro, A. Blanco et al., Eucalyptus pulp fibres as alternative reinforcement to engineered cement-based composites, Industrial Crops and Products, vol.31, issue.2, pp.225-232, 2010.
DOI : 10.1016/j.indcrop.2009.10.009

C. A. Tran-le, T. Maalouf, E. Mai, E. F. Wurtz, and . Collet, Transient hygrothermal behaviour of a hemp concrete building envelope, Energy and Buildings, vol.42, issue.10
DOI : 10.1016/j.enbuild.2010.05.016

URL : https://hal.archives-ouvertes.fr/hal-00709233

V. Tserki, P. Matzinos, S. Kokkou, and C. Panayiotou, Novel biodegradable composites based on treated lignocellulosic waste flour as filler. Part I. Surface chemical modification and characterization of waste flour, Composites Part A: Applied Science and Manufacturing, vol.36, issue.7, pp.965-974, 2005.
DOI : 10.1016/j.compositesa.2004.11.010

]. P. Ubbríaco and E. F. Tasselli, A Study of the Hydration of Lime-Pozzolan Binders, Journal of Thermal Analysis and Calorimetry, vol.52, issue.3, pp.1047-1054, 1998.
DOI : 10.1023/A:1010101126587

H. Uchikawa, S. Hanehara, and E. D. Sawaki, The role of steric repulsive force in the dispersion of cement particles in fresh paste prepared with organic admixture, Cement and Concrete Research, vol.27, issue.1, pp.37-50, 1997.
DOI : 10.1016/S0008-8846(96)00207-4

A. Valadez-gonzalez, J. M. Cervantes-uc, R. Olayo, and P. J. Herrera-franco, Effect of fiber surface treatment on the fiber???matrix bond strength of natural fiber reinforced composites, Composites Part B: Engineering, vol.30, issue.3, pp.309-320, 1999.
DOI : 10.1016/S1359-8368(98)00054-7

G. Verardo, E. Pagani, P. Geatti, and E. P. Martinuzzi, A thorough study of the surface wax of apple fruits, Analytical and Bioanalytical Chemistry, vol.376, issue.5, pp.659-667, 2003.
DOI : 10.1007/s00216-003-1945-7

. Vitruve, Les dix Livres d'architecture de Vitruve, Bibliothèque de l'Image, 2000.

L. Wastiels, H. N. Schifferstein, A. Heylighen, and E. I. Wouters, Relating material experience to technical parameters: A case study on visual and tactile warmth perception of indoor wall materials, Building and Environment, vol.49, pp.359-367, 2012.
DOI : 10.1016/j.buildenv.2011.08.009

]. Y. Wei-00, Y. Wei, E. B. Zhou, and . Tomita, Study of hydration behavior of wood cement-based composite II: effect of chemical additives on the hydration characteristics and strengths of wood-cement composites, Journal of Wood Science, vol.14, issue.10, pp.444-451, 2000.
DOI : 10.1007/BF00765802

A. Wiedenhoeft and E. R. Miller, Structure and Function of??Wood, Handbook of Wood Chemistry and Wood Composites, 2005.
DOI : 10.1201/b12487-4

E. Wirquin, R. Hadjieva-zaharieva, and E. F. Buyle-bodin, Use of water absorption by concrete as a criterion of the durability of concrete-application to recycled aggregated concrete, Materials and Structures, vol.31, issue.147, pp.403-408, 2000.
DOI : 10.1007/BF02479650

J. Kwiatkowski, Influence des conditions aux limites sur les mesures de « l'inertie hygrique » des matériaux de construction, Actes du 24ème congrès de l'AUGC, La Grande Motte, 1-2 Juin, 2006.

Y. Wu, P. Shuler, M. Blanco, Y. Tang, and E. W. Goddard, An Experimental Study of Wetting Behavior and Surfactant EOR in Carbonates With Model Compounds, SPE Journal, vol.13, issue.01, pp.26-34, 2008.
DOI : 10.2118/99612-PA

S. Yi, E. Yang, and J. Choi, Effect of specimen sizes, specimen shapes, and placement directions on compressive strength of concrete, Nuclear Engineering and Design, vol.236, issue.2, pp.115-127, 2006.
DOI : 10.1016/j.nucengdes.2005.08.004

C. Pan, Y. Wang, Y. Dong, and . Ou, Composition, structure and mechanical properties of several natural cellular materials, Chinese Science Bulletin, vol.52, pp.2903-2908, 2007.

K. P. Zhang, R. Lin, H. F. Yang, E. Y. Di, and . Jiang, Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings, Energy and Buildings, vol.38, issue.10, pp.1262-1269, 2006.
DOI : 10.1016/j.enbuild.2006.02.009

L. Zhengtian and A. A. Moslemi, Influence of chemical additives on the hydration characteristics of western larch wod-cement-cement-water mixtures, Forest Products Journal, vol.35, pp.37-43, 1985.