, The measurement of forces in grinding in the presence of vibration, International Journal of Machine Tools and Manufacture, vol.41, issue.4, pp.509-520, 2001.
DOI : 10.1016/S0890-6955(00)00087-0
, La thermographie infrarouge : principes, technologies, applications . Technique et documentation, 4 édition, 1999.
, Dudragne : Aciers à roulements pour applications aéronautiques
, Characterisation of the XD15N high nitrogen martensitic stainless steel for aerospace bearings, Proceedings de 4th International Conference on Launcher Technology "Space Launcher Liquid Propulsion, 2002.
, Inverse Heat Transfer Analysis of Grinding, Part 2: Applications, Journal of Engineering for Industry, vol.118, issue.1, pp.143-149, 1996.
DOI : 10.1115/1.2803635
, Inverse Heat Transfer Analysis of Grinding, Part 1: Methods, Journal of Engineering for Industry, vol.118, issue.1, pp.137-142, 1996.
DOI : 10.1115/1.2803634
, Etude de l'influence de la microstructure et des paramètres de coupe sur le comportement en tournage dur de l'acier à roulement 100Cr6, Thèse de doctorat, 2006.
, Contribution à l'étude de la physique de l'interface meule-pièce dans le cadre de la rectification traditionnelle et à grande vitesse, 2000.
, Residual stresses computation in a grinding process, Journal of Materials Processing Technology, vol.147, issue.3, pp.277-285, 2004.
DOI : 10.1016/S0924-0136(03)00578-8
, Hegeman : Fundamentals of grinding :Surface conditions of ground materials, Thèse de doctorat, 2000.
, Mesure de l'émissivité thermique. Rapport technique, techniques de l'ingénieur, 2005.
, An inverse analysis for the heat conduction during a grinding process. journal of material processing technology, pp.87-94, 2000.
, On the mechanics of the grinding process -part i. stochastic nature of the grinding process, International Journal of Machine Tools and Manufacture, issue.15, pp.431579-1593, 2003.
, Measurement of temperature field in surface grinding using infra-red (ir) imaging system version papier. [Jaeg42] J. Jaeger : Moving sources of heat and the temperature at sliding contacts Study on heat transfer in super high speed grinding : energy partition to the workpiece in hedg, Jin03] T. Jin et D. J. Stephenson : Investigation of the heat partitioning in high efficiency deep grinding. International Journal of Machine Tools and Manufacture, pp.377-383203, 1942.
, Heat flux distributions and convective heat transfer in deep grinding, International Journal of Machine Tools and Manufacture, vol.46, issue.14, pp.1862-1868, 2006.
DOI : 10.1016/j.ijmachtools.2005.11.004
, Heat flux distribution and energy partition in creep-feed grinding. CIRP Annals -Manufacturing Technology Heat flux distribution model by sequential algorithm of inverse heat transfer for determining workpiece temperature in creep feed grinding, International Journal of Machine Tools and Manufacture, vol.46, issue.115, pp.227-232, 1997.
, Grinding temperature within contact arc between wheel and workpiece in high-efficiency grinding of ultrahard cutting tool materials, Journal of Materials Processing Technology, vol.136, pp.1-339, 2003.
, Jeong : An analysis of grinding power and surface roughness in external cylindrical grinding of hardened scm440 steel using the response surface method, International Journal of Machine Tools and Manufacture, vol.46, pp.3-4304, 2006.
, Infrared thermography applied to the resolution of inverse heat conduction problems : recovery of heat line sources and boundary conditions, pp.629-643, 1998.
, A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size, Acta Metallurgica, vol.32, issue.1, pp.137-146, 1984.
, Mathematical modelling of transformation plasticity in steels i : Case of ideal-plastic phases Numerical analysis of grinding temperature measurement by the foil/workpiece thermocouple method, International Journal of Plasticity International Journal of Machine Tools and Manufacture RÉFÉRENCES BIBLIOGRAPHIQUES, vol.5, issue.4614, pp.551-5721716, 1989.
, Litalien : Caracterisation d'une nuance d'acier inoxydable martensitique enrichie a l'azote : resistance a la corrosion ; Proposition d'un traintement de trempe de surface pour application aeraunautique, Thèse de doctorat, 2002.
, Empirical modelling of grinding force based on multivariate analysis, Journal of Materials Processing Technology, vol.203, pp.420-430, 2008.
, Applied mechanics in grinding-part 4 : the mechanism of grinding induced phase transformation. International journal of machine tools manufacturing, pp.1397-1409, 1995.
, The finite element thermal analysis of grinding processes by ADINA, Computers & Structures, vol.56, issue.2-3, pp.313-320, 1995.
DOI : 10.1016/0045-7949(95)00024-B
, Applied mechanics in grinding???VI. Residual stresses and surface hardening by coupled thermo-plasticity and phase transformation, International Journal of Machine Tools and Manufacture, vol.38, issue.10-11, pp.1289-1304, 1998.
DOI : 10.1016/S0890-6955(97)00134-X
, Applied mechanics in grinding. Part 7: residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation, International Journal of Machine Tools and Manufacture, vol.39, issue.8, pp.1285-1298, 1999.
DOI : 10.1016/S0890-6955(98)00094-7
, Residual stresses in ground components caused by coupled thermal and mechanical plastic deformation, Journal of Materials Processing Technology, vol.95, issue.1-3, pp.238-245, 1999.
DOI : 10.1016/S0924-0136(99)00327-1
, Thermal aspects of grinding part 2 -surface temperature and workpiece burn, Journal of ingineering for industry, vol.96, pp.184-1191, 1974.
, Grinding Technology : theory and applications of machining with abrasives . Society of manufacturing Engineers, 1989.
, Thermal Analysis of Grinding, CIRP Annals - Manufacturing Technology, vol.56, issue.2, pp.760-782, 2007.
DOI : 10.1016/j.cirp.2007.10.005
, Simulation of thermal stresses due to grinding, Nais07] P. Naisson : Modélisation thermomécanique du procédé de rectification cylindrique, pp.831-851, 2001.
DOI : 10.1016/S0020-7403(00)00027-8
, Ecole doctorale de saint etienne, 2007.
, Design of a genetic-fuzzy system to predict surface finish and power requirement in grinding. Fuzzy Sets and Systems, pp.487-504, 2004.
, Grinding-hardening with liquid nitrogen: Mechanisms and technology, International Journal of Machine Tools and Manufacture, vol.47, issue.1, pp.97-106, 2007.
DOI : 10.1016/j.ijmachtools.2006.02.010
, La rectification sans centre ou centerless
, Residual stress measurment by diffraction and interpretation, 1987.
, The influence of grinding process on forced vibration damping in headstock of grinding wheel of cylindrical grinder, International Journal of Machine Tools and Manufacture, vol.39, issue.2, pp.229-235, 1999.
DOI : 10.1016/S0890-6955(98)00023-6
, Thermographie -principes et mesure. Rapport technique, 2001.
, Moraux : Les aciers inoxydables martensitiques : nouvelle nuance à l'azote acier x.d 15 n.w. Traitement thermique, pp.19-24, 1999.
, Conséquences mécaniques des transformations structurales dans les alliages ferreux, Thèse de doctorat, 2000.
, Aspects phénoménologiques, mécaniques et métallurgiques en tournage c-BN des aciers durcis, Thèse de doctorat, École nationale supérieure d'arts et métiers de Cluny, 1999.
, Uggowitzer : On the microstructure and properties of 100cr6 steel processed in the semi-solid state
, Coolant shoe development for high efficiency grinding, Journal of Materials Processing Technology, vol.114, issue.3, pp.240-245, 2001.
DOI : 10.1016/S0924-0136(01)00620-3
, Melkote : Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened aisi 52100 steel, International Journal of Machine Tools and Manufacture, vol.48, pp.3-4402, 2008.
, García-Navas : Characterization and modelling of the residual stresses induced by belt finishing on a aisi 52100 hardened steel, Journal of Materials Processing Technology, vol.208, pp.1-3187, 2008.
, Grinding temperatures and energy partitioning, Proceedings de Royal society of London, 1997.
DOI : 10.1098/rspa.1997.0061
, Thermal analysis of high efficiency deep grinding, International Journal of Machine Tools and Manufacture, vol.41, issue.1, pp.1-19, 2001.
DOI : 10.1016/S0890-6955(00)00074-2
, Temperatures in high efficiency deep grinding (hedg) CIRP Annals -Manufacturing Technology, pp.205-208, 2001.
, Flow stress property of a hardened steel at elevated temperatures with tempering effect, A universal wear law for abrasion, pp.891-906
DOI : 10.1016/j.ijmecsci.2004.05.014
, Etude de l'influence des sollicitations thermiques et mécaniques sur le procédé de rectification à grande vitesse par contournage en vue de son optimisation, Thèse de doctorat, 2002.
, Experimental simulation of the efficiency of high speed grinding wheel cleaning, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.170-175, 2006.
, Prévision des contraintes résiduelles d'origine thermique en rectification plane, pp.69-76, 1991.
, Leuven : Thermally induced damage in grinding, Annals of the CIRP, vol.27, pp.571-581, 1978.
, High efficiency deep grinding of a low alloy steel with plated cbn wheels, CIRP Annals -Manufacturing Technology, vol.51, issue.1, pp.241-244, 2002.
, Grinding thermal fields measurments by infrared microscopy, Proceedings de advances in materials and processing technologies, 2006.
, Process Control in Internal Grinding, CIRP Annals - Manufacturing Technology, vol.29, issue.1, pp.207-211, 1980.
DOI : 10.1016/S0007-8506(07)61323-7
, Modelling and Simulation of Grinding Processes, CIRP Annals - Manufacturing Technology, vol.41, issue.2, pp.677-688, 1992.
DOI : 10.1016/S0007-8506(07)63254-5
, Rectification très grande vitesse. Rapport technique, techniques de l'ingénieur, 2004.
, The relation between the traverse dressing of vitrified grinding wheels and their performance, International Journal of Machine Tools and Manufacture, vol.40, issue.12, pp.1787-1811, 2000.
, Hardness-based flow stress and fracture models for numerical simulation of hard machining AISI 52100 bearing steel, Materials Science and Engineering: A, vol.374, issue.1-2, pp.90-100, 2004.
DOI : 10.1016/j.msea.2004.01.012
, Amélioration des méthodes de simulation numérique de la génération des contraintes résiduelles : application au tournage finition du 316L, 2008.
, High-Efficiency-Deep-Grinding (HEDG) Une nouvelle variante de rectification à haut rendement combinant rectification profonde et grande vitesse, 1995.
, Corrélation entre les transformations métallurgiques et les contraintes résiduelles induites lors d'une opération de rectification du 100cr6 trempé à 62 hrc
, Matériaux et contacts : une approche tribologique, 1998.
, Zhang : A revisit to some wheel-workpiece interaction problems in surface grinding. International journal of machine tools and manufacture, pp.905-913, 2002.
, Applied mechanics in grinding 3 : A new formula for contact lenght prediction and comparison of available models. International journal of machine tools and manufacture, pp.587-597, 1993.
, Liste des figures 1.1 Schéma de principe de la rectification plane
, Illustration d'une courbe contrainte-température d', p.38
, 173 38 Tableau des essais réalisés sur le 100Cr6 ? puissance et efforts, 174 39 Tableau des mesures par D.R.X. sur essais 2, p.176
, et les procédés classiques de rectification, p.24