M. Mouridi, T. Laurent, L. Brancheriau, O. Arnould, A. Famiri et al., Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples. Maderas-Cienc Tecnol, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00688988

B. Abid and A. , Etude écologique, phytosocio-écologique et sylvo-pastorale de la tetraclinaie de l'Amsitten (Essaouira), 1976.

P. Bérard, Valorisation des taillis de châtaignier en bois rond pour usage extérieur : étude et optimisation d'un traitement oléothermique pour améliorer l'aspect et la durée de vie du produit, 2003.

P. Boudy, Économie forestière Nord africaine: II, Fasc1: monographie des essences forestières, 1950.

V. Bucur, « Ultrasonic velocity, stiffness matrix and elastic constants of wood », Journal of the Catgut Acoustical, vol.Society, pp.23-28, 1985.

V. Bucur, P. N. Et, and . Rasolofosaon, Dynamic elastic anisotropy and nonlinearity in wood and rock, Dynamic elastic anisotropy and nonlinearity in wood and rock, pp.813-824, 1998.
DOI : 10.1016/S0041-624X(98)00004-3

J. Dakak and . Eddine, La qualité du bois de Thuya de Maghreb (Tetraclinis articulata) et ses conditions de développement sur ses principaux sites phytoécologiques de son bloc méridional au Maroc, 2002.

S. Degallaix and B. Ilschner, Caractérisation expérimentale des matériaux: Propriétés physiques, thermiques et mécaniques, 2007.

T. Delaunay, D. Laux, and J. Y. Ferrandis, Elastic constants identification of anisotropic composite rectangular parallelepipeds, The Journal of the Acoustical Society of America, vol.123, issue.5, p.3406, 2008.
DOI : 10.1121/1.2934117

H. J. Demarest, Cube???Resonance Method to Determine the Elastic Constants of Solids, The Journal of the Acoustical Society of America, vol.49, issue.3B, pp.768-775, 1971.
DOI : 10.1121/1.1912415

M. François, « Vers une mesure non destructive de la qualité des bois de lutherie », Revue des composites et des matériaux avancés, vol.19, issue.3, pp.261-279, 2000.

M. François, Identification des symétries matérielles de matériaux anisotropes, p.6, 1995.

M. François, G. Geymonat, and Y. Berthaud, Determination of the symmetries of an experimentally determined stiffness tensor: Application to acoustic measurements, International Journal of Solids and Structures, vol.35, issue.31-32, pp.31-32, 1998.
DOI : 10.1016/S0020-7683(97)00303-X

D. Fraser, Novel Method of Measuring Elastic and Anelastic Properties of Solids, Review of Scientific Instruments, vol.35, issue.9, pp.1113-1115, 1964.
DOI : 10.1063/1.1718976

M. Grimsel, Mechanisches Verhalten von Holz: Struktur und Parameteridentikation eines anisotropen Werkstoes, 1999.

M. Hatimi, Approvisionnement du secteur artisanal en souches et bois de thuya dans la province d'Essaouira, 1994.

B. Hosten and . Deschamps, Mesure des coefficients élastiques complexes des matériaux anisotropes à l'aide d, 1983.

B. Hosten, B. Et, and . Castagnède, « Mesures des constantes élastiques du bois à l'aide d'un interféromètre ultrasonore numérique et leur optimisation, Comptes-rendus des séances de l'Académie des sciences. Série 2, Mécanique-physique, chimie, sciences de l'univers, sciences de la terre, pp.296-1761, 1983.

C. P. Hsieh and B. Khuri-yakub, One???point contact measurement of spherical resonances, Applied Physics Letters, vol.62, issue.24, pp.3091-3093, 1993.
DOI : 10.1063/1.109145

S. Isoda, H. Oda, and K. Seya, « Displacement distribution of a freely oscillating rutile sphere, Tôhoku Geophysical Journal, vol.32, pp.3-4, 1990.

T. Jaglinski, R. S. Et, and . Lakes, Resonant ultrasound spectroscopy of cylinders over the full range of Poisson's ratio, Review of Scientific Instruments, vol.82, issue.3, p.35105, 2011.
DOI : 10.1063/1.3559305

D. Keunecke, W. Sonderegger, K. Pereteanu, T. Lüthi, and E. P. Niemz, Determination of Young???s and shear moduli of common yew and Norway spruce by means of ultrasonic waves, Wood Science and Technology, vol.85, issue.4, pp.309-327, 2007.
DOI : 10.1007/s00226-006-0107-4

N. Khotbi, Comportement, productivité et modèles de croissance des principales tétraclinaies (Tetraclinis articulata Vahl) au Maroc, 2004.

P. Koch, Utilization of hardwoods growing on southern pine sites, 1985.

C. Kohlhauser, C. Hellmich, C. Vitale-brovarone, A. Boccaccini, A. Rota et al., Ultrasonic Characterisation of Porous Biomaterials Across Different Frequencies, Ultrasonic characterisation of porous biomaterials across different frequencies, pp.34-44, 2009.
DOI : 10.1111/j.1475-1305.2008.00417.x

R. Kumar, Axially Symmetric Vibrations of a Finite, Isotropic Cylinder, The Journal of the Acoustical Society of America, vol.38, issue.5, pp.145-151, 1965.
DOI : 10.1121/1.1909815

H. Lamb, 1882. « On the vibrations of an elastic sphere, pp.189-212

D. Laux, G. Jy-ferrandis, . Leveque, and . Gatt, Elastic properties of composites: Periodical homogenisation technique and experimental comparison using acoustic microscopy and resonant ultrasonic spectroscopy, Ultrasonics, vol.45, issue.1-4, pp.104-112, 2006.
DOI : 10.1016/j.ultras.2006.07.014

T. Lee, E. A. Rs-lakes, and . Lal, Investigation of bovine bone by resonant ultrasound spectroscopy and transmission ultrasound, Biomechanics and Modeling in Mechanobiology, vol.1, issue.2, pp.165-175, 2002.
DOI : 10.1007/s10237-002-0015-y

R. G. Leisure, K. Foster, J. E. Hightower, and D. S. Agosta, Internal friction studies by resonant ultrasound spectroscopy, Materials Science and Engineering: A, vol.370, issue.1-2, pp.34-40, 2004.
DOI : 10.1016/j.msea.2003.08.070

F. Longuetaud, Détection et analyse non destructive de caractéristiques internes de billons d'Epicea commun (Picea abies (L.) Karst.) par tomographie à rayons X, 2005.

M. Markam, « Measurement of the elastic constants of fibre composites by ultrasonics, pp.145-149, 1970.

J. Maynard, Resonant Ultrasound Spectroscopy, Physics Today, vol.49, issue.1, pp.26-31, 1996.
DOI : 10.1063/1.881483

A. Migliori, T. Et, and . Darling, Resonant ultrasound spectroscopy for materials studies and non-destructive testing, Ultrasonics, vol.34, issue.2-5, pp.473-476, 1996.
DOI : 10.1016/0041-624X(95)00120-R

A. Migliori, J. Et, and . Sarrao, Resonant ultrasound spectroscopy: applications to physics, material measurements, and non-destructive evaluation, 1997.
DOI : 10.2172/1250724

J. A. Nelder, R. Et, and . Mead, A Simplex Method for Function Minimization, The computer journal, p.308, 1965.
DOI : 10.1093/comjnl/7.4.308
URL : http://comjnl.oxfordjournals.org/cgi/content/short/7/4/308

H. Oda, O. L. Anderson, D. G. Isaak, and E. I. Suzuki, Measurement of elastic properties of single-crystal CaO up to 1200 K, Physics and Chemistry of Minerals, vol.19, issue.2, pp.96-105, 1992.
DOI : 10.1007/BF00198607

A. J. Panshin and D. Zeeuw, Textbook of wood technology, Mc Graw-Hill, 705 p. Mc Graw-Hill, 1970.

L. Salmen, Micromechanical understanding of the cell-wall structure, Comptes Rendus Biologies, vol.327, issue.9-10, pp.9-10, 2004.
DOI : 10.1016/j.crvi.2004.03.010

S. I. Schubert, D. Gsell, J. Dual, M. Motavalli, and E. P. Niemz, Rolling shear modulus and damping factor of spruce and decayed spruce estimated by modal analysis, Holzforschung, vol.60, issue.1, pp.78-84, 2006.
DOI : 10.1515/HF.2006.014

I. Smith, E. Landis, and E. M. Gong, Fracture and fatigue in wood, 2003.

N. Soga, O. L. Et, and . Anderson, Elastic properties of tektites measured by resonant sphere technique, Journal of Geophysical Research, vol.45, issue.10, pp.1733-1739, 1967.
DOI : 10.1029/JZ072i006p01733

T. Soma, S. Shida, and E. T. Arima, « Calculation of grain angle and verification with spherical wood specimens using ultrasonic waves, Journal-Japan Wood Research Society, vol.48, issue.6, pp.407-412, 2002.

. Taoufiki, Cartographie des types de peuplements et productivité du Thuya dans les forêts de Haha Sud dans le but d'un aménagement, 1993.

V. Terre, Thuya: Importance écologique et économique. En ligne

B. Thibaut, Le processus de coupe du bois par déroulage, Montpellier: Université des Sciences et Techniques du Languedoc, 1988.

B. Thibaut, J. Gril, and E. M. Fournier, Mechanics of wood and trees: some new highlights for an old story, Comptes Rendus de l'Académie des Sciences-Series IIB- Mechanics, pp.701-716, 2001.
DOI : 10.1016/S1620-7742(01)01380-0
URL : https://hal.archives-ouvertes.fr/hal-01032151

F. Torres, Y. Benino, T. Fujiwara, and E. T. Komatsu, Evaluation of elastic/mechanical properties of some glasses and nanocrystallized glass by cube resonance and nanoindentation methods, Materials Research Bulletin, vol.39, issue.10, pp.1431-1443, 2004.
DOI : 10.1016/j.materresbull.2004.04.026

B. J. Zadler, J. H. Le-rousseau, J. A. Scales, and M. L. Smith, Resonant Ultrasound Spectroscopy: theory and application, Resonant Ultrasound Spectroscopy: theory and application, pp.154-169, 2004.
DOI : 10.1111/j.1365-246X.2004.02093.x
URL : http://gji.oxfordjournals.org/cgi/content/short/156/1/154

M. M. Zarandi, A. Bonakdar, and E. I. Stiharu, Investigations on Natural Frequencies of Individual Spherical and Ellipsoidal Bakery Yeast Cells, 2010.