N. Adikaram, C. Karunanayake, and C. Abayasekara, The Role of Pre-formed References 243, 2010.

. C. Gachet and D. Guitard, Influence relative de la morphologie cellulaire et de l???angle des microfibrilles sur l???anisotropie ??lastique tissulaire Longitudinale/Tangentielle du bois sans d??faut des r??sineux, Annals of Forest Science, vol.31, issue.3, pp.275-283, 2006.
DOI : 10.1051/forest:2006006

S. Gade and H. Herlufsen, Technical noteDigital Filter Techniques vs. FFT Techniques for Damping Measurements Sound and vibration, Brüel & Kjaer, 1990.

F. Galeotti, E. Barile, P. Curir, M. Dolci, and V. Lanzotti, Flavonoids from carnation (Dianthus caryophyllus) and their antifungal activity, Phytochemistry Letters, vol.1, issue.1, pp.44-48, 2008.
DOI : 10.1016/j.phytol.2007.10.001

C. C. Gerhards, Effect of moisture content and temperature on the mechanical properties of wood: an analysis of immediate effects, pp.4-36, 1982.

M. Grabner, U. Müller, N. Gierlinger, and R. Wimmer, Effects of Heartwood Extractives on Mechanical Properties of Larch, IAWA Journal, vol.26, issue.2, pp.211-220, 2005.
DOI : 10.1163/22941932-90000113

D. W. Green, J. E. Winandy, and D. E. Kretschmann, Mechanical properties of wood In: Wood Handbook: Wood as an Engineering Material, 1999.

J. Gril, Une modélisation du comportement hygro-rhéologique du bois à partir de sa microstructure, p.pp, 1987.

D. Guitard and F. Amri, Mod??les pr??visionnels de comportement ??lastique tridimensionnel pour les bois feuillus et les bois r??sineux, Annales des Sciences Foresti??res, vol.44, issue.3, pp.335-348, 1987.
DOI : 10.1051/forest:19870305

A. Gutiérrez, J. C. Del-río, C. Gonzáles-vila, and F. J. Martín, Analysis of lipophilic extractives from wood and pitch deposits by solid-phase extraction and gas chromatography, Journal of Chromatography A, vol.823, issue.1-2, pp.449-455, 1998.
DOI : 10.1016/S0021-9673(98)00356-2

A. Gutiérrez, J. Del-río, C. Gonzáles-vila, and F. J. Martín, Chemical Composition of Lipophilic Extractives from Eucalyptus globulus Labill. Wood, Holzforschung, vol.53, issue.5, pp.481-486, 1999.
DOI : 10.1515/HF.1999.079

A. Gutiérrez and J. C. Del-río, Lipids from Flax Fibers and Their Fate in Alkaline Pulping, Journal of Agricultural and Food Chemistry, vol.51, issue.17, pp.4965-4971, 2003.
DOI : 10.1021/jf034370t

D. W. Haines, J. M. Leban, and C. Herbé, Determination of Young's modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods, Wood Science and Technology, vol.30, issue.4, pp.253-263, 1996.
DOI : 10.1007/BF00229348

D. W. Haines, The essential mechanical properties of wood prepared for musical instruments, Catgut Acoustical Society Journal, vol.4, pp.20-32, 2000.

M. Haupt, H. Leithoff, D. Meier, J. Puls, H. G. Richter et al., Heartwood extractives and natural durability of plantation-grown teakwood (Tectona grandis L.)?a case study, Holz als Roh- und Werkstoff, vol.61, issue.6, pp.473-474, 2003.
DOI : 10.1007/s00107-003-0428-z

M. Havimo, A literature-based study on the loss tangent of wood in connection with mechanical pulping, Wood Science and Technology, vol.48, issue.9, pp.627-642, 2009.
DOI : 10.1007/s00226-009-0271-4

R. E. Hernàndez, Influence des composantes secondaires et du contrefil sur les propriétés physico-mécaniques de bois tropicaux, 1989.

R. E. Hernàndez, Moisture sorption properties of hardwoods as affected by their extraneous substances, wood density, and interlocked grain, Wood Fiber Sci, vol.39, pp.132-145, 2007.

T. L. Highley, Comparative durability of untreated wood in use above ground, International Biodeterioration & Biodegradation, vol.35, issue.4, pp.409-419, 1995.
DOI : 10.1016/0964-8305(95)00063-1

J. F. Smith, N. Claydon, M. E. Love, M. Allan, and D. A. Wood, Effect of substrate depth on extracellular endocellulase and laccase production of Agaricus bisporus, Mycological Research, vol.93, issue.3, pp.292-296, 1989.
DOI : 10.1016/S0953-7562(89)80155-8

M. B. Smith and J. March, Advanced Organic Chemistry: Reactions, Mechanisms, and Structure, 2007.

A. J. Stamm and W. K. Loughborough, Variation in shrinkage and swelling of wood, Trans. Ame. Soc. Mech. Eng, vol.64, pp.379-386, 1942.

A. J. Stamm, Wood and Cellulose Science, 1964.

M. Suzuki, Relationship between specific gravity and dynamic decrement with water contents, Mokuzai Gakkaishi, vol.26, issue.5, pp.299-304, 1980.

A. M. Taylor, B. L. Gartner, and J. J. Morelle, Heartwood formation and natural durability: A review, Wood and fiber science, vol.34, issue.25, p.pp, 2002.

M. C. Tewari, Data on Natural Durability of Timber Species (Installed in the Test Yard at New Forest, Dehra Dun) According to 1976 Inspection, Their Treatability and Seasoning Characteristics, p.3127, 1978.

G. I. Torgovnikov, Dielectric properties of wood and wood-based materials, 1993.
DOI : 10.1007/978-3-642-77453-9

J. Van-acker, M. Stevens, and T. Van-cauwenberghe, Is laboratory testing of decay resistance questionable as a single criterion for natural durability?", The international research group on wood protection, pp.96-20096, 1996.

J. Van-acker, M. Stevens, and J. Carey, Criteria for basidiomycetes testing and ways of defining natural durability classes", The international research group on wood protection, pp.98-20144, 1998.

K. Venkataraman, Wood phenolics in the chemotaxonomy of the moraceae, Phytochemistry, vol.11, issue.5, pp.1571-1586, 1972.
DOI : 10.1016/0031-9422(72)85002-7

V. Hornbostel, E. M. Sachs, and C. , Classification of musical instruments: An experiment, Zeitschrift fur Ethnologie, vol.46, pp.553-590, 1914.

X. Wang, R. J. Ross, J. A. Mattson, J. R. Erickson, J. W. Forsman et al., Several nondestructive evaluation techniques for assessing stiffness and MOE of small-diameter logs, 2001.

F. F. Wangaard and L. A. Granados, The effect of extractives on water-vapor sorption by wood, Wood Science and Technology, vol.21, issue.4, pp.253-277, 1967.
DOI : 10.1007/BF00349758

U. G. Wegst, Wood for sound, American Journal of Botany, vol.93, issue.10, pp.1439-1448, 2006.
DOI : 10.3732/ajb.93.10.1439

E. Windeisen, G. Wegener, G. Lesnino, and P. Schumacher, Investigation of the correlation between extractives content and natural durability in 20 cultivated larch trees, Holz als Roh- und Werkstoff, vol.60, issue.5, pp.373-374, 2002.
DOI : 10.1007/s00107-002-0314-0

X. Cen and /. Ts, Durability of wood and wood based products. Determination of solid wood durability against wood destroying fungi Test methods, pp.15083-15084, 2006.

H. Yamamoto, F. Sassus, M. Ninomiya, and J. Gril, A model of anisotropic swelling and shrinking process of wood, Wood Science and Technology, vol.35, issue.1-2, pp.167-181, 2001.
DOI : 10.1007/s002260000074

H. Yano, The Changes in the Acoustic Properties of Western Red Cedar due to Methanol Extraction, Holzforschung, vol.48, issue.6, pp.491-495, 1994.
DOI : 10.1515/hfsg.1994.48.6.491

H. Yano, H. Kajita, and K. Minato, Chemical treatment of wood for musical instruments, The Journal of the Acoustical Society of America, vol.96, issue.6, pp.3380-3391, 1994.
DOI : 10.1121/1.410600

H. Yano, K. Kyou, Y. Furuta, and H. Kajita, Acoustic properties of Brazilian Rosewood used for guitar back plate, Japanese, Abstract and figures in English), Mokuzai Gakkaishi, pp.17-24, 1995.

H. Yano, Y. Furuta, and H. Nakagawa, Materials for guitar back plates made from sustainable forest resources, The Journal of the Acoustical Society of America, vol.101, issue.2, pp.1112-1119, 1997.
DOI : 10.1121/1.418016

K. Yatsunami, M. Ichida, and S. Onodera, The relationship between 1-deoxynojirimycin content and ??-glucosidase inhibitory activity in leaves of 276 mulberry cultivars (Morus spp.) in Kyoto, Japan, Journal of Natural Medicines, vol.1002, issue.1, pp.63-66, 2008.
DOI : 10.1007/s11418-007-0185-0

H. Yoshihara, Off-axis Young???s modulus and off-axis shear modulus of wood measured by flexural vibration tests, Holzforschung, vol.66, issue.2, 2011.
DOI : 10.1515/HF.2011.118

S. Yoshikawa, Acoustical classification of woods for string instruments, The Journal of the Acoustical Society of America, vol.122, issue.1, pp.568-573, 2007.
DOI : 10.1121/1.2743162

K. Zamir, Feeding preferences of Microcerotermes Championi (Snyder) on different timbers dried at different temperature under choice and no choice trials", Nature preceding: hdl:10101/npre, 2008.

D. Q. Zhang, H. Y. Zhang, L. L. Guo, and K. Peng, Determination of Bioactive Components of Acetone Extractives of <i>Cinnamomum camphora</i> Root Wood by Py-GC/MS under 350??C, Advanced Materials Research, vol.230, issue.232, pp.230-232, 2011.
DOI : 10.4028/www.scientific.net/AMR.230-232.837

Z. P. Zheng, K. W. Cheng, Q. Zhu, X. C. Wang, Z. X. Lin et al., : A Structure???Activity Relationship Study, Journal of Agricultural and Food Chemistry, vol.58, issue.9, pp.5368-5373, 2010.
DOI : 10.1021/jf1003607

. Fig, 5.16. tan? and E'/? relationship for specimens submitted to cyclic drying and stabilization. N°:15. Two specimens considered statistically as outliners are excluded, p.149

. Fig, 6.19. Variations in mechanical properties after extractions measured by DMA at 10

. Fig, Mass spectra of cumulated derived-extracts after five successive extractions

). A. Fig, Two identical halves of white Mulberry's wood prepared for Târ fabrication (Yousef Pouria's interview. Jadidonline magazine, p.268, 2007.

). A. Fig, Fixing the pattern to the wood block (Mr. Pouria's interview Jadidonline magazine, p.268, 2007.

.. A. Fig, Photos from Mr, p.269

). A. Fig, Attaching two completely carved halves together to form the final shape (Mr. Pouria's interview. Jadidonline magazine, p.270, 2007.

.. A. Fig, Photo from Mr, p.270

.. A. Fig, Lambskin unattached (Left-From Mr.Zareh's atelier) and glued on the upper bowl (Right-Mr. Pouria's Interview), p.271

.. A. Fig, 9. A complete Târ made by Mr. Zareh. Photo from Mr.Zareh's atelier, p.271

. C. Fig and .. 103°c, Variation in relative MC in two series submitted to successive extractions Raw values of MC were corrected both for contribution of the extractives and the residual MC for drying at, p.278

. C. Fig, Relative variations in volume (?V 0 %) (based on oven dried weight-60°C /48 hrsbefore and after each extraction) for two series submitted to successive extractions, p.279

.. C. Fig, Variations in specific modulus E?/? (%) for both sets submitted to successive extractions. The values of moduli are corrected for the contribution of extractives. Relative values are calculated based on the previous phase, p.280

.. C. Fig, Relative changes in tan? and weight loss (WL %) in specimens of first series (Batch 1) (a) and second series (Batch 2) (b) submitted to successive extractions. tan? of the first series (a) were not corrected for the controls, p.282

. A. Fig, Lambskin unattached (Left-From Mr.Zareh's atelier) and glued on the upper bowl (Right- Mr. Pouria's Interview)

. Fig, A.9. A complete Târ made by Mr. Zareh. Photo from Mr.Zareh's atelier

N. Caron and D. Safvat, Iran (les Traditions musicales), 1965.

. J. During, D. Safvat, and Z. Mirabdolbaghi, The Art of Persian Music, 1990.

H. Farhat, Form and Style in Persian Music, World of Music, vol.20, issue.2, pp.109-118, 1978.

H. Farhat, Iran, I: Art music The New Grove Dictionary of Music and Musicians, pp.292-300, 1980.

H. Farhat, The Dastgah Concept in Persian Music, 2004.
DOI : 10.1017/CBO9780511470233

Z. Khachatoor, Yahya Khan, the genius Târ maker from Jolfa region in Isfahan, Peyman cultural magazine, pp.302-084, 2008.

R. Khaleqi, The story of Iranian music, Farsi), Ferdowsi Press.3 vols, 1954.

B. Lawergren, Counting Strings on Ancient Egyptian Chordophones" in La pluridisciplinarité en archeologie musicale, ed. C. Homo-Lechner and A. Bélis. Paris: Editions de la Maison des Sciences de l'Homme, pp.519-533, 1994.

B. Lawergren, To Tune a String: Dichotomies and Diffusions between the Near and Far East, pp.175-192, 1997.

B. Lawergren, Music in Iranian land, history. i. Pre-Islamic Iran, Encyclopaedia Iranica, 2009.

A. Movahed, The Persian Nei: A Study of the Instrument and Its Musical Style, 1993.

E. Neubauer, The construction of the lute and strings to their Arab, Persian and Turkish sources of the 9th to 15 Century, English), pp.279-378, 1993.

Y. Pouria, Interview with Jadid Online magazine, 2007.

C. Sachs, The History of Musical Instruments, 2006.

D. A. Smith, A History of the Lute from Antiquity to the Renaissance, Lute Society of America, 2002.

E. Yar-shater, Encyclopaedia Iranica, 2004.

E. Zonis, CONTEMPORARY ART MUSIC IN PERSIA, The Musical Quarterly, vol.LI, issue.4, pp.636-684, 1965.
DOI : 10.1093/mq/LI.4.636

E. Zonis, Classical Persian music: An introduction, 1973.
DOI : 10.4159/harvard.9780674434943