S. S. Solanky, I. Campistron, A. Laguerre, and J. F. Pilard, Metathelic selective degradation of polyisoprene: Low-molecular-weight telechelic oligomer obtained from both synthetic and natural rubber, Macromal. Chem, 2005.

C. J. Paul, G. Nair, M. R. Koshy, P. Idage, and B. B. , Segmented block copolymers of natural rubber and bisphenol A-toluene diisocyanate oligomers, Journal of Applied Polymer Science, vol.26, issue.3, pp.706-721, 1999.
DOI : 10.1002/(SICI)1097-4628(19991017)74:3<706::AID-APP25>3.0.CO;2-A

F. R. Flandrin, J. M. Widmaief, and J. J. Flat, Thermal ageing of polyurethane with hydrogenated polyisoprene soft segments, Polymer Degradation and Stability, vol.57, issue.1, 1996.
DOI : 10.1016/S0141-3910(96)00217-0

C. J. Paul, G. Nair, and M. R. , Segmented block copolymers of natural rubber and propylene glycol-toluene diisocyanate oligomers, Polymer Engineering & Science, vol.21, issue.3, 1998.
DOI : 10.1002/pen.10205

S. Gopakumar, G. Nair, and M. R. , Natural rubber???polyurethane block copolymers: Nonlinear structural variations with NCO/OH ratio, Polymer Engineering & Science, vol.35, issue.12, 2006.
DOI : 10.1002/pen.20635

S. Gopakumar, G. Nair, and M. R. , Solution properties of NR/PU block copolymers by size-exclusion chromatography and viscometry, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.15, 2006.
DOI : 10.1002/polb.20874

R. Nair, M. N. , G. Nair, and M. R. , Synthesis and characterisation of soluble block copolymers from NR and TDI based Polyurethane, J. Mater. Sci, vol.43, p.738747, 2008.

P. Sukumar, V. Jayashree, G. Nair, M. R. , R. Nair et al., Synthesis and thermal studies of block copolymers from NR and MDI-based polyurethanes, Journal of Applied Polymer Science, vol.2, issue.1, pp.19-28, 2009.
DOI : 10.1002/app.27300

G. Maier, V. Knopfova, B. Voit, P. H. Ly, B. T. Dung et al., Synthesis and characterization of segmented block copolymers based on, 2004.

N. Kebir, I. Campistron, A. Lagurerre, J. F. Pilard, C. Bunel et al., Use of hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs). Part 1. Influence of molecular weight and chemical modification of HTPI on the mechanical and thermal properties of PUs, Polymer, vol.46, issue.18, pp.6869-6877, 2005.
DOI : 10.1016/j.polymer.2005.05.106
URL : https://hal.archives-ouvertes.fr/hal-00458436

K. Gorna and S. Gogolewski, In vitro degradation of novel medical biodegradable aliphatic polyurethanes based on ??-caprolactone and Pluronics?? with various hydrophilicities, Polymer Degradation and Stability, vol.75, issue.1, pp.113-122, 2002.
DOI : 10.1016/S0141-3910(01)00210-5

H. M. Younes, E. B. Grimaldo, and B. G. Amsden, Synthesis, characterization and in vitro degradation of a biodegradable elastomer, Biomaterials, vol.25, issue.22, pp.5261-5269, 2004.
DOI : 10.1016/j.biomaterials.2003.12.024

R. G. Heijkants, R. V. Calck, T. G. Tienen, J. H. Groot, P. Buma et al., Uncatalyzed synthesis, thermal and mechanical properties of polyurethanes based on poly(??-caprolactone) and 1,4-butane diisocyanate with uniform hard segment, Biomaterials, vol.26, issue.20, pp.4219-4228, 2005.
DOI : 10.1016/j.biomaterials.2004.11.005

J. H. Hong, H. J. Jeon, J. H. Yoo, W. R. Yu, and J. H. Youk, Synthesis and characterization of biodegradable poly(??-caprolactone-co-??-butyrolactone)-based polyurethane, Polymer Degradation and Stability, vol.92, issue.7, pp.1186-1192, 2007.
DOI : 10.1016/j.polymdegradstab.2007.04.007

L. Tatai, T. G. Moore, R. Adhikari, F. Malherbe, R. Jayasekara et al., Thermoplastic biodegradable polyurethanes: The effect of chain extender structure on properties and in-vitro degradation, Biomaterials, vol.28, issue.36, p.54075417, 2007.
DOI : 10.1016/j.biomaterials.2007.08.035

H. J. Jeon, J. S. Kim, T. G. Kim, J. H. Kim, W. R. Yu et al., Preparation of poly(??-caprolactone)-based polyurethane nanofibers containing silver nanoparticles, Applied Surface Science, vol.254, issue.18, p.58865890, 2008.
DOI : 10.1016/j.apsusc.2008.03.141

K. M. Zia, M. Zuber, I. A. Bhatti, M. Barikani, and M. A. Sheikh, Evaluation of biocompatibility and mechanical behavior of chitin-based polyurethane elastomers. Part-II: Effect of diisocyanate structure, International Journal of Biological Macromolecules, vol.44, issue.1, p.2328, 2009.
DOI : 10.1016/j.ijbiomac.2008.11.002

J. Han, B. Chen, L. Ye, A. Y. Zhang, J. Zhang et al., Synthesis and characterization of biodegradable polyurethane based on poly(??-caprolactone) and L-lysine ethyl ester diisocyanate, Frontiers of Materials Science in China, vol.67, issue.1, p.2532, 2009.
DOI : 10.1007/s11706-009-0013-4

L. R. Larraz, A. B. Fernandez, A. Tercjak, A. Ribes, I. Mondragon et al., Synthesis and microstructuremechanical property relationships of segmented polyurethanes based on a PCLPTHFPCL block copolymer as soft segment, Eur. Polym. J, vol.45, 2009.

C. Sivakumar and A. S. Nasar, Poly(??-caprolactone)-based hyperbranched polyurethanes prepared via A2+B3 approach and its shape-memory behavior, European Polymer Journal, vol.45, issue.8, 2009.
DOI : 10.1016/j.eurpolymj.2009.05.003

C. Prisacariu, Polyurethane elastomers from morphology to mechanical aspects, pp.75-108, 2011.

V. Thomas and J. Muthu, Biomechanical studies on aliphatic physically crosslinked poly(urethane urea) for blood contact applications, Journal of Materials Science: Materials in Medicine, vol.17, issue.7, p.27212733, 2008.
DOI : 10.1007/s10856-008-3367-8

V. Durrieu, A. Gandini, M. N. Belgacem, A. Blayo, G. Eisele et al., Preparation of aqueous anionic poly-(urethane-urea) dispersions: Influence of the nature and proportion of the urethane groups on the dispersion and polymer properties, Journal of Applied Polymer Science, vol.26, issue.2, pp.700-710, 2004.
DOI : 10.1002/app.20933
URL : https://hal.archives-ouvertes.fr/hal-00306790

G. J. Biemond, K. Braspenning, and R. J. Gaymans, Polyurethanes with monodisperse rigid segments based on a diamine???diamide chain extender, Journal of Applied Polymer Science, vol.45, issue.4, 2008.
DOI : 10.1002/app.27282

C. Hepburn, Polyurethane elastomer, 2 nd edition, 1991.

N. Kebir, I. Campistron, A. Laguerre, J. F. Pilard, C. Bunal et al., Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender nature and their equivalent ratios on the mechanical and thermal properties of PUs, e-Polymers, vol.6, issue.1, pp.1-14, 2006.
DOI : 10.1515/epoly.2006.6.1.619
URL : https://hal.archives-ouvertes.fr/hal-00458436

S. Mondal and J. Hu, Structural characterization and mass transfer properties of polyurethane block copolymer: influence of mixed soft segment block and crystal melting temperature, Polymer International, vol.27, issue.9, pp.1013-1020, 2006.
DOI : 10.1002/pi.2026

W. Wang, P. Ping, H. Yu, X. Chen, and X. Jing, Synthesis and characterization of a novel biodegradable, thermoplastic polyurethane elastomer, Journal of Polymer Science Part A: Polymer Chemistry, vol.8, issue.19, pp.5505-5512, 2006.
DOI : 10.1002/pola.21643

P. Ping, W. Wang, X. Chen, and X. Jing, The influence of hard-segments on two-phase structure and shape memory properties of PCL-based segmented polyurethanes, Journal of Polymer Science Part B: Polymer Physics, vol.38, issue.5, pp.557-570, 2007.
DOI : 10.1002/polb.20974

G. Gopakumar and G. Nair, Natural rubberpolyurethane block copolymers: Nonlinear structural variations with NCO/OH ratio, 2006.

S. Gopakumar, C. J. Paul, and M. R. Nair, Segmented block copolymers of natural rubber and 1,4-butanediol-toluene diisocyanate oligomers, 2005.

K. Bagdi, K. Molnar, A. Wacha, A. Bota, and B. Pukanszky, Hierarchical structure of phase-separated segmented polyurethane elastomers and its effect on properties, Polymer International, vol.41, issue.4, pp.529-536, 2011.
DOI : 10.1002/pi.3003

K. Gorna, S. Polowinski, and S. Gogolewski, Synthesis and characterization of biodegradable poly(?-caprolactone urethane)s. I. Effect of the polyol molecular weight, catalyst, and chain extender on the molecular and physical characteristics, Journal of Polymer Science Part A: Polymer Chemistry, vol.21, issue.1, pp.156-170, 2002.
DOI : 10.1002/pola.10096

D. Sarkar, J. C. Yang, A. S. Gupta, and S. T. Lopina, Synthesis and characterization of L-tyrosine based polyurethanes for biomaterial applications, Journal of Biomedical Materials Research Part A, vol.22, issue.1, pp.263-271, 2009.
DOI : 10.1002/jbm.a.32095

A. Watnabe, Y. Takebayashi, T. Ohtsubo, and M. Furukawa, Dependence of biodegradation and release behavior on physical properties of poly(caprolactone)-based polyurethanes, Journal of Applied Polymer Science, vol.26, issue.1, pp.246-253, 2009.
DOI : 10.1002/app.30464

C. Y. Gong, S. Z. Fu, Y. C. Gu, C. B. Liu, B. Kan et al., Synthesis, characterization, and hydrolytic degradation of biodegradable poly(ether ester)-urethane copolymers based on ??-caprolactone and poly(ethylene glycol), Journal of Applied Polymer Science, vol.59, issue.2, pp.1111-1119, 2009.
DOI : 10.1002/app.29946

B. K. Kim, S. Lee, and M. Xu, Polyurethanes having shape memory effects, Polymer, vol.37, issue.26, pp.5781-5793, 1996.
DOI : 10.1016/S0032-3861(96)00442-9

B. Bogdanov, V. Toncheva, E. Schacht, L. Finelli, B. Sarti et al., Physical properties of poly(ester-urethanes) prepared from different molar mass polycaprolactone-diols, Polymer, vol.40, issue.11, pp.3171-3182, 1999.
DOI : 10.1016/S0032-3861(98)00552-7

I. O. Bakare, C. Pavithran, F. E. Okieimen, and C. K. Pillai, Synthesis and characterization of rubber-seed-oil-based polyurethanes, Journal of Applied Polymer Science, vol.44, issue.5, pp.3292-3301, 2008.
DOI : 10.1002/app.28391

Y. C. Tu, G. J. Suppes, and F. H. Hsieh, Thermal and mechanical behavior of flexible polyurethane-molded plastic films and water-blown foams with epoxidized soybean oil, Journal of Applied Polymer Science, vol.5, issue.3, pp.1311-1317, 2009.
DOI : 10.1002/app.29178

K. S. Chian and L. H. Gan, Development of a rigid polyurethane foam from palm oil, Journal of Applied Polymer Science, vol.68, issue.3, pp.509-515, 1998.
DOI : 10.1002/(SICI)1097-4628(19980418)68:3<509::AID-APP17>3.0.CO;2-P

M. Jalilian, H. Yeganeh, and M. N. Haghighi, Synthesis and properties of polyurethane networks derived from new soybean oil-based polyol and a bulky blocked polyisocyanate, Polymer International, vol.293, issue.12, pp.1385-1394, 2008.
DOI : 10.1002/pi.2485

G. Lligadas, J. C. Ronda, M. Galia, U. Biermann, and J. O. Metzer, Synthesis and characterization of polyurethane from epoxidized methyl oleate based polyetherpolyols as renewable resources, J. Polym. Sci. A Polym, 2006.

B. Begines, F. Zamora, I. Roffe, . Mancera, and J. A. Galbis, Sugar-based hydrophilic polyurethanes and polyureas, Journal of Polymer Science Part A: Polymer Chemistry, vol.344, issue.9, 2011.
DOI : 10.1002/pola.24621

M. Barikani, H. Honarkar, and M. Barikani, Synthesis and characterization of polyurethane based on chitosan and Poly(-caprolactone), J. Appl. Polym, 2009.

A. B. Cherian and E. T. Thachil, Block copolymers of unsaturated polyesters and functional elastomers, Journal of Applied Polymer Science, vol.32, issue.5, pp.1956-1964, 2004.
DOI : 10.1002/app.21083

X. Sun and X. Ni, Block copolymer oftrans-polyisoprene and urethane segment: Crystallization behavior and morphology, Journal of Applied Polymer Science, vol.29, issue.6, pp.2286-2294, 2004.
DOI : 10.1002/app.21016

S. Gopakumar, C. J. Paul, and M. R. Nair, Segmented block copolymers of natural rubber and 1,4-butanediol-toluene diisocyanate oligomers, 2005.

A. B. Cherian, B. T. Abraham, and E. T. Thachil, Modification of unsaturated polyester resin by polyurethane prepolymers, Journal of Applied Polymer Science, vol.35, issue.2, pp.449-456, 2006.
DOI : 10.1002/app.23131

N. Kébir, I. Campistron, A. Laguerre, J. F. Pilard, C. Bunel et al., Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender nature and their equivalent ratios on the mechanical and thermal properties of PUs, e-Polymers, vol.6, issue.1, pp.1-14, 2006.
DOI : 10.1515/epoly.2006.6.1.619

N. Kébir, I. Campistron, A. Laguerre, J. F. Pilard, C. Bunel et al., Use of telechelic cis-1,4-polyisoprene cationomers in the synthesis of antibacterial ionic polyurethanes and copolyurethanes bearing ammonium groups, Biomaterials, vol.28, issue.29, pp.4200-4208, 2007.
DOI : 10.1016/j.biomaterials.2007.06.006

R. Nair, M. N. , G. Nair, and M. R. , Synthesis and characterisation of soluble block copolymers from NR and TDI based polyurethanes, Journal of Materials Science, vol.27, issue.2, pp.738-747, 2008.
DOI : 10.1007/s10853-007-2198-1

C. Nair, R. Gopakumar, S. , G. Nair, and M. R. , Synthesis and characterization of block copolymers based on natural rubber and polypropylene oxide, Journal of Applied Polymer Science, vol.37, issue.2, pp.955-962, 2007.
DOI : 10.1002/app.25263

R. Nair, M. N. Sukumar, P. Jayashree, V. , G. Nair et al., Mechanical properties and fractography of block copolymers based on NR and MDI-based polyurethanes, Polymer Bulletin, vol.111, issue.1, pp.83-96, 2010.
DOI : 10.1007/s00289-010-0251-8

A. Saetung, A. Rungvichaniwat, I. Campistron, P. Klinpituksa, A. Laguerre et al., Preparation and physico-mechanical, thermal and acoustic properties of flexible polyurethane foams based on hydroxytelechelic natural rubber, Journal of Applied Polymer Science, vol.101, issue.2, pp.828-837, 2010.
DOI : 10.1002/app.31601

A. Saetung, A. Rungvichaniwat, I. Campistron, P. Klinpituksa, A. Laguerre et al., Controlled degradation of natural rubber and modification of the obtained telechelic oligoisoprenes: Preliminary study of their potentiality as polyurethane foam precursors, Journal of Applied Polymer Science, vol.263, 2010.
DOI : 10.1002/app.31907
URL : https://hal.archives-ouvertes.fr/hal-00487061

N. Kébir, I. Campistron, A. Laguerre, J. F. Pilard, and C. Bunel, New crosslinked polyurethane elastomers with various physical properties from natural rubber derivatives, Journal of Applied Polymer Science, vol.41, issue.3, pp.1677-1687, 2011.
DOI : 10.1002/app.34013

M. Matsui, M. Munaro, and L. C. Akcelrud, Chitin- polyurethane networks: correlations between physical properties and composition, Journal of Polymer Research, vol.81, issue.6, pp.2255-2264, 2011.
DOI : 10.1007/s10965-011-9639-x

K. M. Zia, M. Zuber, M. Barikani, I. A. Bhatti, and M. B. Khan, Surface characteristics of chitin-based shape memory polyurethane elastomers, Colloids and Surfaces B: Biointerfaces, vol.72, issue.2, 2009.
DOI : 10.1016/j.colsurfb.2009.04.011

Y. Wang, W. Xu, and Y. Chen, Surface modification on polyurethanes by using bioactive cdarboxymethylated fungal glucan from Poria cocos, 2010.

M. Wan, D. K. Baek, J. H. Cho, and I. K. Kang, In vitro blood compatibility of heparin-immobilized polyurethane containing ester groups in the side chain, Journal of Materials Science: Materials in Medicine, vol.15, issue.10, 2004.
DOI : 10.1023/B:JMSM.0000046389.87287.3f

S. Watcharakul, K. Umsakul, B. Hodgson, W. Chumeka, and V. Tanrattanakul, Biodegradation of a blended starch/natural rubber foam biopolymer and rubber gloves by Streptomyces coelicolor CH13, Electron. J. Biotechnol, vol.15, issue.1, 2012.

S. Mondal and J. L. Hu, Structural characterization and mass transfer properties of polyurethane block copolymer: influence of mixed soft segment block and crystal melting temperature, Polymer International, vol.27, issue.9, 2006.
DOI : 10.1002/pi.2026

A. S. Khan, Z. Ahmed, M. J. Edirisinghe, F. S. Wong, and I. U. Rehman, Preparation and characterization of a novel bioactive restorative composition based on covalently coupled polyurethane-nanohydroxyaptite fibres, Acta. Biomaterialia, vol.4, 2008.

V. Romanova, V. Begishev, V. Karmanov, A. Kondyurin, and M. F. Maitz, Fourier transform Raman and Fourier transform infrared spectra of cross-linked polyurethaneurea films synthesized from solutions, Journal of Raman Spectroscopy, vol.36, issue.10, pp.769-777, 2002.
DOI : 10.1002/jrs.914

K. M. Hercule, Z. Yan, and M. M. Christophe, Preparation and characterization of waterborne polyurethane crosslinked by urea brideges, 2011.

C. Hepburn, Polyurethane elastomer, 2 nd edition, 1991.

M. Furukawa, Y. Mitsui, T. Fukumaru, and K. Kojio, Microphase-separated structure and mechanical properties of novel polyurethane elastomers prepared with ether based diisocyanate, Polymer, vol.46, issue.24, pp.10817-10822, 2005.
DOI : 10.1016/j.polymer.2005.09.009

A. M. Samy and U. O. Joshua, Recent advances in synthesis, characterization and rheologic properties of polyurethanes and POSS/polyurethane nanocomposites dispersions and films, Prog. Polym. Sci, vol.34, p.12831332, 2009.

Y. Wei, F. Cheng, H. Li, and J. Yu, Thermal properties and micromorphology of polyurethane resins based on, 2005.

C. Hepburn, Polyurethane elastomer, 1991.
DOI : 10.1007/978-94-011-2924-4

S. Gopakumar and M. R. Nair, Swelling characteristics of NR/PU block copolymers and the effect of NCO/OH ratio on swelling behaviour, Polymer, vol.46, issue.23, pp.10419-10430, 2005.
DOI : 10.1016/j.polymer.2005.08.021

N. Kebir, G. Morandi, I. Campistron, A. Laguerre, and . J. Pilard, Synthesis of well defined amino telechelic cis-1,4-oligoisoprenes from carbonyl telechelic oligomers; first studies of their potentialities as polyurethane or polyurea materials precursors, Polymer, vol.46, issue.18, pp.6844-6854, 2005.
DOI : 10.1016/j.polymer.2005.05.122

N. Kebir, I. Campistron, A. Laguerre, J. F. Pilard, C. Bunal et al., Use of telechelic cis-1,4-polyisoprene cationomers in the synthesis of antibacterial ionic polyurethanes and copolyurethanes bearing ammonium groups, Biomaterials, vol.28, issue.29, pp.4200-4208, 2007.
DOI : 10.1016/j.biomaterials.2007.06.006
URL : https://hal.archives-ouvertes.fr/hal-00199868

C. J. Paul, G. Nair, M. R. Koshy, and P. B. Idage, Segmented block copolymers of natural rubber and bisphenol A-toluene diisocyanate oligomers, Journal of Applied Polymer Science, vol.26, issue.3, pp.706-721, 1999.
DOI : 10.1002/(SICI)1097-4628(19991017)74:3<706::AID-APP25>3.0.CO;2-A

R. Nair, M. N. , G. Nair, and M. R. , Synthesis and characterisation of soluble block copolymers from NR and TDI based polyurethanes, J. Mater. Sci, vol.43, p.738747, 2008.

G. Maier, V. Knopfova, B. Voit, P. H. Ly, B. T. Dung et al., Synthesis andcharacterization of segmented block copolymers based on hydroxyl-terminated liquid natural rubber and ,-diisocyanato telechelics, 2004.

K. Gorna and S. Gogolewski, In vitro degradation of novel medical biodegradable aliphatic polyurethanes based on -caprolactone and Pluronics with various hydrophilicities, Polym. Degrad. Stabil, vol.75, p.113122, 2002.

H. M. Younes, E. B. Grimaldo, and B. G. Amsden, Synthesis, characterization and in vitro degradation of a biodegradable elastomer, Biomaterials, vol.25, issue.22, p.52615269, 2004.
DOI : 10.1016/j.biomaterials.2003.12.024

R. G. Heijkants, R. V. Calck, T. G. Tienen, J. H. Groot, P. Buma et al., Uncatalyzed synthesis, thermal and mechanical properties of polyurethanes based on poly(??-caprolactone) and 1,4-butane diisocyanate with uniform hard segment, Biomaterials, vol.26, issue.20, p.42194228, 2005.
DOI : 10.1016/j.biomaterials.2004.11.005

R. G. Heijkants, L. W. Schwab, R. V. Van-calck, J. H. De-groot, A. J. Pennings et al., Extruder synthesis of a new class of polyurethanes: Polyacylurethanes based on poly(??-caprolactone) oligomers, Polymer, vol.46, issue.21, p.89818989, 2005.
DOI : 10.1016/j.polymer.2005.06.089

H. Yeganeh, M. M. Lakouraj, and . S. Jamshidi, Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(??-caprolactone) and poly(ethylene glycol), European Polymer Journal, vol.41, issue.10, p.23702379, 2005.
DOI : 10.1016/j.eurpolymj.2005.05.004

V. Thomas and . J. Muthu, Biomechanical studies on aliphatic physically crosslinked poly(urethane urea) for blood contact applications, Journal of Materials Science: Materials in Medicine, vol.17, issue.7, p.27212733, 2008.
DOI : 10.1007/s10856-008-3367-8

Y. Lu and L. Zhang, Effects of NCO/OH molar ratio on miscibility and properties of semiinterpenetrating polymer networks from polyurethane and benzyl konjac glucomannan, Journal of Applied Polymer Science, vol.45, issue.5, pp.1304-1310, 2003.
DOI : 10.1002/app.11809

E. 1. Larkin and P. , Infrared and raman spectroscopy: priciples and spectral interpretation, pp.1-5, 2011.

R. S. Das and Y. K. Agrawal, Raman spectroscopy: Recent advancements, techniques and applications, Vibrational Spectroscopy, vol.57, issue.2, pp.163-176, 2011.
DOI : 10.1016/j.vibspec.2011.08.003

S. W. Cormell and J. L. Koenig, Raman Spectra of Polyisoprene Rubbers, Macromolecules, vol.2, issue.5, pp.546-549, 1969.
DOI : 10.1021/ma60011a019

P. J. Hendra and K. D. Jackson, Applications of Raman spectroscopy to the analysis of natural rubber, Spectrochimica Acta Part A: Molecular Spectroscopy, vol.50, issue.11, pp.50-1987, 1994.
DOI : 10.1016/0584-8539(94)80210-6

K. D. Jackson, M. J. Loadman, C. H. Jones, and G. Ellis, Fourier transform raman spectroscopy of elastomers: An overview, Spectrochimica Acta Part A: Molecular Spectroscopy, vol.46, issue.2, 1990.
DOI : 10.1016/0584-8539(90)80091-C

K. C. Khulbe, B. Kruczek, G. Chowdhury, S. Gagne, T. Matsuura et al., Characterization of membranes prepared from PPO by Raman scattering and atomic force microscopy, Journal of Membrane Science, vol.111, issue.1, pp.57-70, 1996.
DOI : 10.1016/0376-7388(95)00276-6

M. A. Rodriguez-perez, R. A. Campo-arnaiz, R. R. Aroca, and J. A. Saja, Characterisation of the matrix polymer morphology of polyolefins foams by Raman spectroscopy, Polymer, vol.46, issue.26, pp.12093-12102, 2005.
DOI : 10.1016/j.polymer.2005.08.098

M. Pastorczak, M. Kozanecki, and J. Ulanski, Water???Polymer interactions in PVME hydrogels ??? Raman spectroscopy studies, Polymer, vol.50, issue.19, pp.4535-4542, 2009.
DOI : 10.1016/j.polymer.2009.07.048

S. Parnell, K. Min, and M. Cakmak, Kinetic studies of polyurethane polymerization with Raman spectroscopy, Polymer, vol.44, issue.18, pp.5137-5144, 2003.
DOI : 10.1016/S0032-3861(03)00468-3

A. S. Khan, Z. Ahmed, M. J. Edirisinghe, F. S. Wong, and I. U. Rehman, Preparation and characterization of a novel bioactive restorative composite based on covalently coupled polyurethanenanohydroxyapatite fibres, Acta. Biomaterialia, vol.4, 2008.

A. Ferry and P. Jacobsson, Raman, infra-red and d.s.c. studies of lithium coordination in a thermoplastic polyurethane, Polymer, vol.37, issue.5, pp.737-744, 1996.
DOI : 10.1016/0032-3861(96)87248-X

V. Romanova, V. Begishev, V. Karmanov, A. Kondyurin, M. F. Maitz et al., Fourier transform raman and fourier transform infrared spectra of crosslinked polyurethaneurea films synthesized from solutions, 2002.

H. Liem and L. Y. Yeung, Segment self-orientational behavior in shape memory polymer thin films probed by Raman spectroscopy, Journal of Applied Polymer Science, vol.23, issue.2, 2007.
DOI : 10.1002/app.26111

H. Janik, B. Palys, and Z. S. Petrovic, Multiphase-Separated Polyurethanes Studied by Micro-Raman Spectroscopy, Macromolecular Rapid Communications, vol.24, issue.3, pp.265-268, 2003.
DOI : 10.1002/marc.200390039

D. Lin-vien, N. B. Clothup, W. G. Fateley, and J. G. Grasselli, The handbook of infrared and Raman characteristic frequencies of organic molecules

A. C. Ts, We gratefully acknowledge financial support from the Franco-Thai Cooperation Program in, Higher Education and Research, the National Research Council of Thailand (NRCT) and the Development and Promotion of Science and Technology Talents Project (DPST)

E. 1. Tu, Y. C. Suppes, G. J. Hsieh, and F. H. , Thermal and mechanical behavior of flexible polyurethane-molded plastic films and water-blown foams with epoxidized soybean oil, Journal of Applied Polymer Science, vol.5, issue.3, pp.1311-1317, 2009.
DOI : 10.1002/app.29178

G. Ligadas, J. C. Ronda, M. Galia, U. Biermann, and J. O. Metzer, Synthesis and characterization of polyurethanes from epoxidized methyl oleate based polyether polyols as renewable resources, Journal of Polymer Science Part A: Polymer Chemistry, vol.6, issue.1, pp.634-645, 2006.
DOI : 10.1002/pola.21201

M. Barikani, H. Honarkar, and M. Barikani, Synthesis and characterization of polyurethane based on chitosan and poly(-caprolactone), J. Appl. Polym, 2009.

A. B. Cherian and E. T. Thachil, Block copolymers of unsaturated polyesters and functional elastomers, Journal of Applied Polymer Science, vol.32, issue.5, pp.1956-1964, 2004.
DOI : 10.1002/app.21083

S. Gopakumar, C. J. Paul, and M. R. Nair, Segmented block copolymers of natural rubber and 1,4-butanediol-toluene diisocyanate oligomers, 2005.

C. Prisacariu, Polyurethane elastomers from morphology to mechanical aspects, pp.75-108, 2011.

C. Hepburn, Polyurethane elastomer, 2 nd edition, 1991.

S. Matsumura, Y. Soeda, and K. Toshima, Perspectives for synthesis and production of polyurethanes and related polymers by enzymes directed toward green and sustainable chemistry, Applied Microbiology and Biotechnology, vol.28, issue.1, pp.12-20, 2006.
DOI : 10.1007/s00253-005-0269-2

W. Panwiriyarat, V. Tanrattankul, J. F. Pilard, P. Pasetto, and C. Khaokong, Synthesis and characterization of block copolymer from natural rubber, toluene-2,4-diisocyanate and poly(-caprolactone) diol-based polyurethane, 2011.

J. Kusan, H. Keul, and H. Höcker, Cationic ring-opening polymerization of tetramethylene urethane, Macromolecules, vol.34, p.389395, 2001.

F. Schmitz, H. Keul, and H. Höcker, Copolymerization of 2,2-dimethyltrimethylene carbonate with tetramethylene urea: a new route to the polyurethane, Polymer, vol.39, issue.14, p.31793186, 1998.
DOI : 10.1016/S0032-3861(97)00640-X

O. Ihata, Y. Kayaki, and T. Ikariya, Synthesis of thermoresponsive polyurethane from 2-methylaziridine and supercritical carbon dioxide, 2004.

H. Tomita, F. Sanda, and T. Endo, Polyaddition of bis(seven-membered cyclic carbonate) with diamines: A novel and efficient synthetic method for polyhydroxyurethanes, Journal of Polymer Science Part A: Polymer Chemistry, vol.197, issue.23, pp.4091-4100, 2001.
DOI : 10.1002/pola.10058

B. Ochiai, J. Nakayama, M. Mashiko, Y. Kaneko, T. Nagasawa et al., Synthesis and crosslinking reaction of poly(hydroxyurethane) bearing a secondary amine structure in the main chain, Journal of Polymer Science Part A: Polymer Chemistry, vol.28, issue.23, p.58995905, 2005.
DOI : 10.1002/pola.21078

H. Tomita, F. Sanda, and T. Endo, Reactivity comparison of five-and sixmember cyclic carbonate with amine: Basic evaluation for synthesis of poly(hydroxyurethane), J. Polym. Sci. Pol. Chem, vol.39, 2001.

I. Javni, D. P. Hong, and Z. S. Petrovic, Soy-based polyurethanes by nonisocyanate route, Journal of Applied Polymer Science, vol.34, issue.6, p.38673875, 2008.
DOI : 10.1002/app.27995

H. Tomita, F. Sanda, and T. Endo, One-pot non-isocyanate synthesis of polyurethanes from bisepoxide, carbon dioxide, and diamine, J. Polym. Sci, 2005.

B. Ochiai, S. Sato, and T. Endo, Synthesis and properties of polyurethanes bearing urethane moieties in the side chain, Journal of Polymer Science Part A: Polymer Chemistry, vol.352, issue.15, p.34083414, 2007.
DOI : 10.1002/pola.22093

G. Rokicki and A. Piotrowska, A new route to polyurethanes from ethylene carbonate, diamines and diols, Polymer, vol.43, issue.10, pp.2927-2935, 2002.
DOI : 10.1016/S0032-3861(02)00071-X

M. R. Kim, H. S. Kim, C. S. Ha, D. W. Park, and J. K. Lee, Syntheses and thermal properties of poly(hydroxyl)urethanes by polyaddition reaction of bis(cyclic carbonate) and diamines, J. Appl. Polym. Sci, vol.81, p.27352743, 2001.

J. Li and T. Wang, Coupling reaction and azoeotropic distillation for the synthesis of glycerol carbonate from glycerol and dimethyl carbonate, 2010.

S. C. Kim, Y. H. Kim, H. Lee, D. Y. Yoon, and B. K. Song, Lipase-catalyzed synthesis of glycerol carbonate from renewable glycerol and dimethyl carbonate through transesterification, Journal of Molecular Catalysis B: Enzymatic, vol.49, issue.1-4, pp.75-78, 2007.
DOI : 10.1016/j.molcatb.2007.08.007

M. Helou, J. F. Carpentier, and S. M. Guillaume, Poly(carbonate-urethane): an isocyanate-free procedure from ??,??-di(cyclic carbonate) telechelic poly(trimethylene carbonate)s, Green Chem., vol.41, issue.2, pp.266-271, 2011.
DOI : 10.1039/C0GC00686F
URL : https://hal.archives-ouvertes.fr/hal-00632149

M. Ramos and S. J. Huang, Functional condensation polymer, pp.185-196, 2002.

A. Scholarship and . Ward, Promotion of Science and Technology Talents Project Grant of French-Thai Cooperation Program in Higher Education and Research Grant of Higher Education and Research, the

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, and C. Khaokong, Synthesis and Characterization of Block Copolymer from Natural Rubber, Toluene-2,4-Diisocyanate and Poly(??-aprolactone) Diol-Based Polyurethane, Materials Science Forum, vol.695, pp.316-319, 2011.
DOI : 10.4028/www.scientific.net/MSF.695.316

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, P. Pasetto, and C. Khaokong, Physical and Thermal Properties of Polyurethane from Isophorone Diisocyanate, Natural Rubber and Poly(<I>??</I>-caprolactone) with High NCO:OH Content, Advanced Science Letters, vol.19, issue.3, pp.1016-1020, 2012.
DOI : 10.1166/asl.2013.4820

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, P. Pasetto, and C. Khaokong, Preparation and Properties of Bio-based Polyurethane Containing Polycaprolactone and Natural Rubber, Journal of Polymers and the Environment, vol.108, issue.1, 2012.
DOI : 10.1007/s10924-012-0567-6

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, P. Pasetto, and C. Khaokong, Bio-based polyurethanes from natural rubber and poly(-caprolactone): effect of diisocyanate type and molecular weight of diols, Journal of Applied Polymer Science, 2012.

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, and C. Khaokong, Synthesis and characterization of block copolymer from natural Rubber, toluene-2,4-diisocyanate and poly(-caprolactone) diol-based polyurethane, The 12 th International Symposium on Eco-Materials Processing and Design, p.182, 2011.

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, P. Pasetto, and C. , Effect of natural rubber and poly(-caprolactone) content on mechanical and thermal properties of the novel biodegradable polyurethane, International Conference on Bio-based Polymers and Composites 2012, pp.27-31, 2012.

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, P. Pasetto, and C. , Bio-based polyurethane made from toluene-2,4- diisocyanate, natural rubber and poly(-caprolactone) with high NCO:OH content: physical and thermal properties, Journées de l'École Doctorale 3MPL, JED2012, École des Mines de Nantes (EMN), 2012.

W. Panwiriyarat, V. Tanrattanakul, J. Pilard, P. Pasetto, and C. Khaokong, Effect of natural rubber and poly(-caprolactone) content on mechanical and thermal properties of novel biodegradable Polyurethane, 2012 International Conference on Advances in Materials Science and Engineering President Palace Hotel, 2012.