P. Adragna, S. Samper, and M. Pillet, A proposition of 3D inertial tolerancing to consider the statistical combination of the location and orientation deviations, International Journal of Product Development, vol.10, issue.1/2/3, pp.26-45, 2010.
DOI : 10.1504/IJPD.2010.029985

URL : https://hal.archives-ouvertes.fr/hal-00452096

B. Anselmetti, Cotation de fabrication selon les normes ISO, Hermes sciences, 2010.

B. Anselmetti and P. Bourdet, Optimization of a workpiece considering production requirements, Computers in Industry, vol.21, issue.1, pp.23-34, 1993.
DOI : 10.1016/0166-3615(93)90042-Y

B. Anselmetti and H. Louati, Generation of manufacturing tolerancing with ISO standards, International Journal of Machine Tools and Manufacture, vol.45, issue.10, pp.1124-1131, 2005.
DOI : 10.1016/j.ijmachtools.2005.01.001

B. Ayadi, B. Anselmetti, Z. Bouaziz, and A. Zghal, Three-dimensional modelling of manufacturing tolerancing using the ascendant approach, The International Journal of Advanced Manufacturing Technology, vol.38, issue.1???2, pp.279-290, 2008.
DOI : 10.1007/s00170-007-1225-3

E. Ballot and P. Bourdet, Presentation a partir d'un exemple du calcul des chaines de cotes 3d, Revue Technologies et Formations, vol.68, pp.23-27, 1996.

E. Ballot and P. Bourdet, An integrated framework for 3d tolerance chains in design and manufacturing, ASME 2001 -Design Engeneering Conferences and Computers and Information in Engineering Conference, 2001.

[. Ballu, J. Dantan, and L. Mathieu, Tolérancement géométrique des produits, chapitre Langage de spécification : GeoSpelling, Hermes sciences, pp.37-67, 2007.

A. Ballu and L. Mathieu, Univocal expression of functional and geometrical tolerances for design, manufacturing and inspection, Proceedings of the 4 th CIRP Seminar on Computer Aided Tolerancing, pp.31-46, 1995.
DOI : 10.1007/978-94-009-1529-9_3

J. K. Davidson and J. J. Shah, A New Mathematical Model for Geometric Tolerances as Applied to Round Faces, Journal of Mechanical Design, vol.124, issue.4, pp.609-622, 2002.
DOI : 10.1115/1.1497362

A. Desrochers, Modelling three-dimensional tolerance zones using screw parameters, procedings of ASME 25 th Design Automation Conference, 1999.

A. Desrochers, W. Ghie, and L. Laperriere, Application of a Unified Jacobian???Torsor Model for Tolerance Analysis, Journal of Computing and Information Science in Engineering, vol.3, issue.1, pp.2-14, 2003.
DOI : 10.1115/1.1573235

D. Duret, Cotation et méthodes de contrôle en fabrication mécanique, 1988.

D. Gaunet, 3D Functional Tolerancing & Annotation: CATIA tools for Geometrical Product Specification, Geometric Product Specification and Verification : Integration of Functionality, 2001.
DOI : 10.1007/978-94-017-1691-8_3

M. Giordano, B. Kataya, and E. Pairel, Tolerance analysis and synthesis by means of clearance and deviation spaces, Proceedings of the 7 th CIRP Seminar on Computer Aided Tolerancing, 2001.
DOI : 10.1007/978-94-017-1691-8_15

URL : https://hal.archives-ouvertes.fr/hal-00258235

M. Giordano, E. Pairel, and S. Samper, Tolérancement géométrique des produits, chapitre Analyse et synthèse des tolérances : méthode des domaines, Hermes sciences, pp.161-193, 2007.

E. Goldschmidt, Gammes et cotation pour le réglage des machinesoutils de décolletage, Thèse de Doctorat, 2009.

K. Jaballi, ContributionàContributionà la génération assistée par ordinateur du tolérancement de fabrication 3D, Thèse de Doctorat, ´ Ecole Nationale d'Ingénieurs de, 2009.

K. Jaballi, A. Bellacicco, and J. Louati, AlainRivì ere et Mohamed Haddar : A computer aided tolerancing : Algorithm for 3d manufacturing tolerancing, Advances in Production Engineering & Management, pp.163-176, 2007.

L. Laperriere, W. Ghie, and A. Desrochers, Statistical and Deterministic Tolerance Analysis and Synthesis Using a Unified Jacobian-Torsor Model, CIRP Annals - Manufacturing Technology, vol.51, issue.1
DOI : 10.1016/S0007-8506(07)61550-9

J. Louati, B. Ayadi, Z. Bouaziz, and M. Haddar, Three-dimensional modeling of geometric defaults to optimize a manufactured part setting, International Journal of Advanced Manufacturing Technology, vol.29, pp.3-4342, 2006.

L. Mathieu and A. Ballu, A Model for a Coherent and Complete Tolerancing Process, Models for Computer Aided Tolerancing in Design and Manufacturing, 2007.
DOI : 10.1007/1-4020-5438-6_5

H. Mejbri, B. Anselmetti, and K. Mawussi, Functional tolerancing of complex mechanisms: Identification and specification of key parts, Computers & Industrial Engineering, vol.49, issue.2, pp.241-265, 2005.
DOI : 10.1016/j.cie.2005.04.002

H. Mejbri, Contribution au développement d'une méthode de cotation fonctionnelle des mécanismes complexes, Thèse de Doctorat, 2004.

J. [. Mujezinovic, J. J. Davidson, and . Shah, A New Mathematical Model for Geometric Tolerances as Applied to Polygonal Faces, Journal of Mechanical Design, vol.126, issue.3, pp.504-518, 2004.
DOI : 10.1115/1.1701881

A. Mujezinovic, A New Mathematical Model for Representing Geometric Tolerances, Thèse de Doctorat, 1999.

P. Muthu, V. Dhanalakshmi, and K. Sankaranarayanasamy, Design and manufacturing tolerances optimisation with quality loss functions, International Journal of Advanced Operations Management, vol.2, issue.1/2, pp.90-107, 2010.
DOI : 10.1504/IJAOM.2010.034588

J. Petit, Spécification Géométrique des Produits : Méthode d'analyse de tolérances. Application en Conception Assistée par Ordinateur, Thèse de Doctorat, 2004.

M. Pillet, F. Bernard, and L. Avrillon, Le tolérancement inertiel, une autre façon d'intégrer l'aspect combinatoire dans les processus assemblés . Revue internationale de CFAO et d'informatique graphique [TAG87] Genichi Taguchi : The System of Experimental Design : Engineering Methods to Optimize Quality and Minimize Costs, pp.401-413, 1987.

D. Teissandier, Y. Couetard, and . Gerard, A computer aided tolerancing model: proportioned assembly clearance volume, Computer-Aided Design, vol.31, issue.13, pp.805-817, 1999.
DOI : 10.1016/S0010-4485(99)00055-X

URL : https://hal.archives-ouvertes.fr/hal-01202586

S. Tichadou, Modélisation et quantification tridimensionnelles des ´ ecarts de fabrication pour la simulation d'usinage, Thèse de Doctorat, Ecole Centrale de Nantes, 2005.

S. Tichadou, O. Legoff, and J. Hascoët, Process planning geometrical simulation : compared approaches between integrated cad/cam system ans small displacement torsor model, IDMME, 2004.

F. Vignat, ContributionàContributionà l'´ elaboration d'un modèle 3D de simulation de fabrication pour l'analyse et la synthèse des tolérances, le modèle MMP, Thèse de Doctorat, 2005.

F. Vignat and F. Villeneuve, 3D Transfer of Tolerances Using a SDT Approach: Application to Turning Process, Journal of Computing and Information Science in Engineering, vol.3, issue.1, pp.45-53, 2003.
DOI : 10.1115/1.1565073

URL : https://hal.archives-ouvertes.fr/hal-00366259

[. Vignat and F. Villeneuve, Tolérancement géométrique des produits, chapitre Analyse et synthèse tridimensionnelles de spécifications de fabrication, Hermes sciences, pp.311-344, 2007.

[. Vignat, F. Villeneuve-et-mojtaba-kamali, and . Nejad, From the nominal model to a mondel of manufactured parts in cad context, Asian International Journal of Science and Technology in Production and Manufacturing Engineering, vol.2, issue.2, pp.35-42, 2009.

[. Villeneuve, O. Legoff, and Y. Landon, Tolerancing for manufacturing: A three-dimensional model, International Journal of Production Research, vol.39, issue.8, pp.1625-1648, 2001.
DOI : 10.1080/00207540010024104

URL : https://hal.archives-ouvertes.fr/hal-00366281

F. Villeneuve and F. Vignat, 3d synthesis of manufacturing tolerances using a sdt approach, Proceedings of the 8 th CIRP Seminar on Computer Aided Tolerancing, pp.279-289, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01355703

[. Villeneuve and F. Vignat, Manufacturing Process Simulation for Tolerance Analysis and Synthesis, Advances in integrated design and manufacturing in mechanical engineering, pp.189-200, 2005.
DOI : 10.1007/1-4020-3482-2_15

URL : https://hal.archives-ouvertes.fr/hal-01355487

. Normes, ISO17450-1] Spécification géométrique des produits (gps) -concepts généraux -modèle pour la spécification et la vérification géométriques, p.2011