:. M. Arnst, Inversion of probabilistic models of structures using transfer functions, Thèse de Doctorat, 2007.
URL : https://hal.archives-ouvertes.fr/tel-00238573

:. G. Baecher and T. S. Ingra, Stochastic FEM in settlement predictions, Journal of the Geotechnical Engineering Division, vol.107, issue.4, pp.449-463, 1981.

:. R. Balling, J. C. Free, and A. R. Parkinson, Consideration of worst-case manufacturing tolerances in design optimization, Proceedings of the International ASME, 1986.

:. E. Balmes, Review and evaluation of shape expansion methods, Proceedings of the 18 th International Modal Analysis Conference, 2000.

:. E. Balmes, Parametric families of reduced finite element models. Theory and application, Mechanical Systems and Signal Processing, vol.10, issue.4, pp.381-394, 1996.

:. E. Balmes, Modèles expérimentaux complets et modèles analytiques réduits en dynamique des structures, 1997.

:. E. Balmes, J. P. Bianchi, and J. M. Leclere, Structural Dynamics Toolbox for use with MATLAB. " , SDTools, User's Guide Version 6.0, 2007.

:. E. Balmes, Optimal Ritz vectors for component mode synthesis using the singular value decomposition, AIAA Journal, vol.34, pp.1256-1260, 1996.

:. T. Bayes, An essay towards solving a problem in the doctrine of chances, Philosophical Transactions of the Royal Society, vol.LIII, pp.376-418, 1763.

:. R. Belmans and W. Geysen, A case study of the electromechanical analysis of the audible noise in an inverter fed induction motor, Proceedings of EPE, pp.451-455, 1989.

:. W. Benfield and R. F. Hurda, Vibration analysis of structures by component mode substitution, AIAA Journal, vol.9, pp.1255-1261, 1971.

:. Y. Ben-haim, Information-gap Decision Theory: Decisions Under Severe Uncertainty, 2001.

:. J. Bennet and R. V. Lust, Conservative methods for structural optimization, AIAA Journal, 1990.

:. R. Berriet, Etude de méthodes de correction paramétrique de modèles en élastodynamique, Thèse de Doctorat N°484, 1996.

:. C. Berthod, Identification paramétrique de grandes structures : réanalyse et méthode évolutionnaire, Thèse de Doctorat, 1998.

:. M. Bouazizi, M. Guedri, and N. Bouhaddi, Robust component modal synthesis method adapted to the survey of the dynamic behaviour of structure with localised non-linearities, Mechanical Systems and Signal Processing, vol.20, pp.131-157, 2006.

:. A. Bouazzouni, « Contribution à l'identification de structures linéaires dissipatives dans le domaine fréquentiel, Thèse de Doctorat N°499, 1995.

:. K. Brahmi, Double condensation en sous-structuration dynamique, Thèse de Doctorat, 1996.

:. K. Brahmi, Double condensation en sous-structuration dynamique, Thèse de Doctorat N°511, 1996.

:. S. Chen, X. W. Yang, and H. D. Lian, Comparison of several reanalysis methods for modified structures, Structural and Multidisciplinary Optimisation, vol.20, pp.253-259, 2000.

:. Chou, Microstructural design of fiber composites, 1992.

. Cei, Railway Applications ? Rolling Stock Equipment ? Schock and Vibration Tests

:. C. Cetinyaka, Localization of longitudinal waves in bi-periodic elastic structures with disorder, Journal of Sound and Vibration, vol.221, issue.1, pp.49-66, 1999.

:. H. Chebli, Modélisation des incertitudes aléatoires non-homogènes en dynamique des structures pour le domaine des basses fréquences, Thèse de Doctorat. Conservatoire National des Arts et Métiers ? Office National d'Etudes et de Recherche Aérospatiales, 2002.

:. C. Chen, D. Duhamel, and C. Soize, Probabilistic approach for model and data uncertainties and ist experimental identification in structural dynamics: case of composite sandwich panels, Journal of Sound and Vibration, vol.294, issue.12, pp.64-81, 2006.

:. R. Craig and M. C. Bampton, Coupling of substructures of dynamic analyses, AIAA Journal, vol.6, issue.7, pp.1313-1319, 1968.

:. R. Craig-aiaa-/-asme-/-asce-/ and . Ahs, Coupling of substructures for dynamic analyses : an overview, Proceedings of the 42 nd, pp.3-14, 2000.

:. S. Cogan, G. Lallemant, F. Ayer, Y. Ben-haim, and «. , Updating linear elastic models with modal selective sensitivity, Inverse Problems in Engineering, vol.2, pp.29-47, 1995.

:. J. Den and . Hartog, Vibration of frames of electrical machines, Transactions of American Society of Mechanical Engineers, vol.50, pp.1-6, 1928.

:. O. Dessombz, F. Thouverez, J. Laine, and L. Jezequiel, Analysis of mechanical systems using interval computations applied to finite element methods, Journal of Sound and Vibration, vol.239, issue.5, pp.949-968, 2001.

:. M. Dias, The effect of the clamping force on the dynamic behavior of a stator core, Proceedings of the 17th international modal analysis conference, pp.201-207, 1999.

:. O. Ditlevsen and H. O. Madsen, Structural Reliability Methods, 1996.

:. D. Dubois and H. Prade, Possibilistic logic: a retrospective and prospective view, Fuzzy set and Systems, vol.144, issue.1, pp.3-23, 2004.

:. A. Ellison and S. J. Yang, Natural frequencies of stators of small electric machines, Proceedings of IEE, vol.118, pp.185-190, 1971.

A. El, A. Omri, A. Fennan, . Hihi, and . Elastic, Plastic homogenization for layered composites, European Journal of Mechanics. A. Solids, vol.19, issue.4, pp.585-601

:. S. Ennaime and «. , Contribution à l'identification de structures mécaniques : localisation des défauts dominants et réanalyse, estimation des forces extérieures, Thèse de Doctorat N° 516, 1996.

:. E. Erdelyi, Predetermination of the sound pressure levels of magnetic noise in medium induction motors, 1955.

:. N. Fillod and R. Fillod, A method for selecting master DOF in dynamic substructuring using the Guyan method, Computer and Structure, vol.46, issue.516, pp.941-946, 1992.

:. G. Fishman, Monte Carlo : Concepts, Algorithms and Applications, 1996.

:. M. Friswell, « The adjusment of structural parameters using a minimum variance estimator, Mechanical Systems and Signal Processing, pp.143-155, 1989.

:. S. Garvey, The vibrational behaviour of laminated components in electrical machines, The fourth International Conference on Electrical Machines and Drives, pp.226-231, 1989.

:. M. Gerardin and D. Rixen, Théorie des Vibrations : Application à la Dynamique des Structures, 2007.

:. R. Ghanem and P. D. Spanos, Stochastic Finite Elements: a Spectral Approach, 1991.

:. G. Gladwell, Branch mode analysis of vibrating systems, Journal of Sound and Vibration, vol.1, pp.41-59, 1964.

:. R. Goldman, Vibration analysis bu dynamic partitioning, AIAA Journal, vol.7, pp.1152-1154, 1969.

:. K. Graff, Wave Motion in Elastic Solids, 1975.

:. R. Guyan, Reduction of stiffness and mass matrices, AIAA Journal, vol.3, p.380, 1965.

:. J. Hammersley and D. C. Handscomb, Monte Carlo Methods, 1967.

:. F. Hemez, A. C. Wilson, and S. W. Doebling, Design of computer experiments for improving an impact test simulation, Proceedings of the 19 th International Modal Analysis Conference, pp.977-985, 2001.

:. F. Hemez and C. Frhat, Etude théorique et expérimentale entre modèles éléments finis et tests modaux pour de graneds et flexibles structures spatiales, Actes du Colloque National de Mécanique, pp.480-493, 1993.

:. W. Heylen, Optimization of model matrices by means of experimentally obtained dynamic data

:. S. Hou, Review of modal synthesis techniques and a new approach, Schock and Vibration Bulletin, vol.40, issue.4, pp.25-30, 1969.

:. S. Huang, « Correction paramétrique de structures mécaniques : approches fréquentielles, Thèse de Doctorat N° 271, 1992.

:. L. Humbert, F. Thouverez, and L. Jezequiel, Finite Element dynamic model updating using modal thermoelastic fields, Journal of Sound and Vibration, vol.228, issue.2, pp.397-420, 1999.

:. B. Hurty, Structural eigenvalue problems: elimination of unwanted variables, AIAA Journal, vol.3, pp.961-962, 1965.

:. W. Hurty, Vibrations of structural systems by component mode synthesis, Journal of Engineering Mechanics Division American Society of Civil Engineering, vol.86, issue.4, pp.51-69, 1960.

:. S. Ibrahim, Correlation of analysis and test in modelling os structures: assessment and review, Structural Safety Evaluation base on System Ident. Approaches, 1988.

:. E. Jamhour, Commande douce de systèmes mécaniques : optimisation de trajectoires sous diverses contraintes, Thèse de Doctorat N° 412, 1994.

:. E. Jaynes, Information theory and statistical mechanics, 620-630 and, pp.171-190, 1957.
DOI : 10.1103/physrev.106.620

:. H. Jordan and H. Frohne, Determination of resonance frequencies of stators of polyphase motors, Larmbekampfung, vol.1, pp.137-140, 1957.

:. D. Kammer, « Sensor placement for on-orbit modal identification and correlation of large space structures, Journal Guidance, vol.14, issue.2, pp.251-259, 1991.

:. U. Kirsch, Design-oriented analysis of structures Unified approach, Journal of Engineering Mechanics, vol.129, issue.3, pp.264-272, 2003.

:. U. Kirsch, A unified reanalysis approach for structural analysis, design and optimization, Structural and Multidisciplinary Optimisation, vol.25, pp.67-85, 2003.

:. U. Kirsch, Combined approximations. A general reanalysis approach for structural optimization, Structural and Multidisciplinary Optimisation, vol.20, pp.97-106, 2000.

:. G. Klir, Generalized information theory: aims, results and open problems, Reliability Engineering and Systems Safety, vol.85, issue.1-3, pp.21-38, 2004.

:. A. Kolmogorov, Foundations of the Theory of Probability, 1956.

:. P. Ladveze, M. Reynier, N. Bui, H. D. Tanaka, and M. , inverse Problems in Engineering, Chap. Error on the constitutive relation in dynamics, 1994.

:. W. Lai, D. Rubin, and E. Krempl, Introduction to Continuum Mechanics, 1993.

:. K. Lee, I. S. Eom, G. J. Park, and W. I. Lee, Robust design for unconstrained optimisation problems using Taguchi method, AIAA Journal, 1996.

:. P. Le and . Moal, Comportement viscoplastique de stratifiés verre-époxy : des propriétés du constituants à celles du matériau composite, Thèse de Docotrat N° 337, 1993.

:. D. Lenoir, Recalage de modèle en élastodynamique: synthèse bibiographique des methods basées sur l'exloitation des réponses forcées dans le domaine fréquentiel, 1994.

:. J. Lombard, Contribution à la réduction des modèles elements finis par synthèse modale, Thèse de Doctorat, 1999.

:. M. Loeve, Probability Theory, 1977.

:. R. Macneal, A hybrid method of component mode synthesis, Computer and Structures, vol.4, pp.581-601, 1971.

:. D. Martinez, A. K. Miller, and T. G. Carne, Combined experimental/ analytical modelling of shell/payload structures, Proceedings of the ASME, AMD, pp.167-184, 1985.

:. R. Majed, « Placement optimal d'excitateurs et modélisation de structures non-linéaires, Thèse de Doctorat N° 493, 1995.

:. M. Mckay, R. J. Beckman, and W. J. Conover, A comparison of three methods for selecting values of input variables in the analysis of output from a computer code, Technometrics, vol.21, issue.2, pp.239-246, 1979.

:. F. Massa, Gestion des imperfections en phase de conception des structures mécaniques, Thèse de Doctorat, 2005.

:. G. Masson, B. Ait-brick, S. Cogan, and N. Bouhaddi, Compnent mode synthesis (CMS) based on an enriched Ritz approach for efficient structural optimization, Journal of Sound and Vibration, vol.296, pp.4-5, 2006.

:. G. Masson, Synthèse modale robuste adaptée à l'optimisation de modèles de grande taille, Thèse de Doctorat, 2003.

:. P. Michel, Etude expérimentale et modélisation des caractéristiques mécaniques d'un matériau composite en verre-époxy, Thèse de Doctorat N° 5, 1983.

:. P. Moine, L. Billet, and D. Aubry, Two updating methods for dissipative models with non-symmetric matrices, Proceedings of the 15 th International Modal Analysis Conference, 1931.

:. R. Moore, Interval Analysis, 1966.

:. J. Mottershead and M. I. Friswell, Model updating in structural dynamics:a survey, Journal of Sound and Vibration, vol.167, issue.2, pp.347-375, 1993.

:. H. Natke, Updating computational models in the frequency domain based on measured data: a survey, Probabilistics Engineering Mechanics, 1988.

?. Fatigue and . Eng, Eurocode 3 ? Design of steel structures ? Part 1-9 : Fatigue)

:. A. Nobari, M. Imregun, and S. Ziaei-rad, On the uniqueness of updated models, ISMA, vol.19, 1994.

:. M. Papadrakakis and V. Papadopoulos, Parallel solution methods for stochastic finite element analysis using Monte Carlo simulation, Computer Methods in Applied Mechanics and Engineering, vol.168, pp.305-320, 1999.

:. R. Pascual-gimenez, J. C. Golinval, and M. Razeto, On the reliability of error localization indicators, Proceedings of the 23 rd International Conference on Noise and Vibration Engineering, 1998.

:. H. Pavlovsky, Vypocet vlastnich kmitoctu statorovych, svazku elektrickych stroju, elektrickych stroju, Elecktrotech. Obz, vol.57, pp.305-311, 1968.

:. J. Przemmeniecki, Theory of Matrix Structural Analysis, 1968.

:. G. Puel, Sur une théorie des méconnaissances en dynamique des structures, Thèse de Doctorat, 2004.

:. D. Rade, « Correction paramétrique de modèles éléments finis : élargissement de l'espace de connaissance, Thèse de Doctorat N° 403, 1994.

:. A. Ramanitranja, « Identification paramétrique : adaptation entre la structure et son modèle par expansion, Thèse de Doctorat N° 532, 1996.

:. D. Rixen, The dual Craig-Bampton method, Proceedings of the 21 st IMAC, 2003.

:. C. Robert and G. Casella, Monte Carlo Statistical Methods, 2004.

:. S. Rubin, Improved component mode representation for structural dynamic analysis, AIAA Journal, vol.13, issue.8, pp.995-1006, 1975.

:. R. Rubinstein, Simulation and the Monte Carlo Method, 1981.

:. A. Saltelli, S. Tarantola, F. Campolongo, and M. Ratto, Sensitivity Analysis in Practice: A Guide to Assessing Scientific Models, 2004.

:. P. Salvini and A. Fregolent, On the chances for a successful updating, ISMA, vol.19, 1994.

:. G. Schueller, Computational stochastic mechanics: recent advances, Computers and Structures, vol.79, pp.2225-2234, 2001.

:. P. Schiavone and N. Bouhaddi, Reduced models allowing frequency responses calculation, Mécanique Industrielle et Matériaux, Revue du GAMI, vol.49, issue.2, pp.79-81, 1996.

:. P. Schiavone, Contribution au recalage de modèles base sur la correlation des réponses fréquentielles, Thèse de Doctorat, 1999.

:. J. Schultze, F. M. Hemez, S. W. Doebling, and H. Sohn, Statistical based non-linear model updating using feature extraction, Proceedings of the 19 th International Modal Analysis Conference, pp.18-26, 2001.

W. , S. F. Wojtkiewicz, I. Yoshida, B. A. Zeldin, and E. Zhang, A state-of-the-art report on computational stochastic mechanisms, Probabilistic Engineering Mechanics, vol.12, issue.4, pp.197-321, 1997.

:. J. Sewall and E. C. Naumann, Technical Note NASA-TN D-4705. An experimental and analytical vibration study of thin cylindrical shells with and without longitudinal stiffeners, National Aeronautics and Space Administration, 1968.

:. G. Shafer, A Mathematical Theory of Evidence, 1976.

:. C. Shannon, A mathematical theory of communication, Bell System Technology Journal, vol.27, pp.379-426, 1948.

:. M. Shinozuka and F. Yamazaki, Stochastic Structural Dynamics: Progress in Theory and Applications, Chap: Stochastic Finite Element Analysis, 1988.

:. J. Shumilov, Calculating stator vibrations in electrical machines, Proceedings of the International Conference on Electrical Machines, 1974.

:. R. Singal, S. P. Verma, and K. Williams, Vibrations of long and short laminated stators of electrical machines, Part III: results for short stators and validity of simplified frequency equation, Journal of Sound And Vibration, vol.115, issue.1, pp.31-44, 1989.

:. C. Soize, Modélisation du flou structural en dynamique linéaire des systèmes mécaniques complexes. I. Eléments théoriques, La Recherche Aérospatiale, vol.5, pp.337-362, 1986.

:. C. Soize, Vibration damping in low-frequency range due to structural complexity : a model based on the theory of fuzzy structures and model parameters estimations, Computers and Structures, vol.58, issue.5, pp.901-915, 1994.

:. C. Soize, A non-parametric model of random uncertainties for reduced matrix models in structural dynamics, Probabilistic Engineering Mechanics, vol.15, issue.3, pp.277-294, 2000.

:. C. Soize, A comprehensive overview of a non-parametric probabilistic approach of model uncertainties for predictive models in structural dynamics, Journal of Sound and Vibration, vol.288, issue.3, pp.623-652, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00686182

:. T. Takada, Variability response functions and stochastic field discretization in stochastic finite element methods, Proceedings of the 6 th Speciality Conference on Probabilistic Mechanics and Structural and Geotechnical Reliability, 1992.

:. Z. Tang, P. Pillay, A. Omekanda, and C. Li, Measurement of Young's modulus for switched reluctance motor vibration determination, Proceedings of the International Conference on Electric Machines and Drives, pp.1590-1595, 2003.

:. P. Timar, Noise and Vibration of Electrical Machines, 1988.

:. E. Vanmarcke and M. Grigoriu, Stochastic finite element analysis of simple beams, Journal of Engineering Mechanics, vol.1095, pp.1203-1214, 1983.

:. D. Veneziano, F. Casciati, and L. Faravelli, Method of seismic fragility for complicated systems, Proceedings of the 2 nd Specilistic Meeting on Probabilistic Methods in Seismic Risk Assessment for NPP, California, 1983.

:. D. Verdyck, R. Belmans, and W. Geysen, Electro-mechanical analysis of the audible noise of an inverter-fed squirrel-cage induction motor, IEEE Transaction on Industrial Electronics, vol.27, pp.539-544, 1991.

:. S. Verma and R. S. Girgis, Considerations on the choice of main dimensions of stators of electrical machines in relation to their vibration characteristics, IEEE Transactions on PAS, vol.94, pp.2151-2159, 1975.

:. S. Verma, Vibration behaviour of laminated stators of electrical machines, The third Conference on Electrical Machines and Drives, pp.113-117, 1987.

:. S. Verma, K. Williams, and R. K. Singal, Vibrations of long and short laminated stators of electrical machines, Part I: theory, experimental models, procedure and set-up, Journal of Sound And Vibration, vol.129, issue.1, pp.1-13, 1989.

:. E. Walter and L. Pronzato, Identification de modèles paramétriques à partir de données expérimentales, 1994.

:. C. Wang and J. C. Lai, Vibration analysis of an induction motor, Journal of Sound and Vibration, vol.224, issue.4, pp.733-756, 1999.

:. H. Wang and K. Williams, Effets of laminations on the vibrational behaviour of electrical machine stators, Journal of Sound and Vibration, vol.202, issue.5, pp.703-715, 1997.

:. B. Wang, W. D. Pikley, A. R. Palazzolo, S. Watanabe, K. Kenjo et al., Reanalysis modal synthesis and dynamic design, Chap. 8, In state of the art surveys on Finite Element technology Natural frequencies and vibration behaviour of motor stators, ASME publications. IEEE Transactions on Power Apparatus and Systems, vol.144, issue.4, p.102, 1983.

:. J. Weiss and C. Bord, Les matériaux composites, 1992.

:. T. Weisser and N. Bouhaddi, Rénalyse dynamique de structures par une variante de la méthode des Approximations Combinées, Actes du 9 ème Colloque National en Calcul des Structures, pp.695-700, 2009.

:. K. Williams, R. K. Singal, and S. P. Verma, Vibrations of long and short laminated stators of electrical machines, Part II: results for long stators, Journal of Sound And Vibration, vol.129, issue.1, pp.15-29, 1989.

:. K. Worden, G. Manson, T. M. Lord, and M. I. Friswell, Some thoughts on uncertainty quantification and propagation, Proceedings of the 21 st International Modal Analysis Conference, 2003.

:. S. Yang, Finite Element method in evaluating the stator natural frequencies of small machines, Proceedings of the International Conference on Electrical Machines, 1978.

:. K. Yap and D. C. Zimmerman, A comparative study of structural dynamic modification and sensitivity method approximation, Mechanical Systems and Signal Processing, vol.16, issue.4, pp.585-597, 2002.

:. L. Zadeh, Fuzzy sets as a basis for a theory of possibility, Information and Control, vol.1, pp.3-28, 1978.

:. L. Zadeh, Fuzzy sets, Information and Control, vol.8, pp.338-353, 1965.

:. Q. Zhang, Identification modale et paramétrique de structures mécaniques auto-adjointes et non auto-adjointes, Thèse de Doctorat N° 211, 1987.

:. Z. Zhu and D. Howe, Effects of end-shields and rotor on natural frequencies and modes of stator of small electrical machines, The fourth International Conference on Electrical Machines and Drives, pp.232-236, 1989.