H. L. Malek and A. K. Hassan, The ellipsoidal technique for design centering and region approximation. Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on, vol.10, issue.8, pp.1006-1014, 1991.

G. L. Ang, A. H. Ang, and W. H. Tang, Kernel method in importance sampling density estimation, Structural Safety and Reliability, pp.1193-1200, 1990.

A. Arnaud, J. Bect, M. Couplet, A. Pasanisi, and E. Vazquez, Évaluation d'un risque d'inondation fluviale par planification séquentielle d'expériences, 42èmes Journées de Statistique, 2010.

S. K. Au and J. Beck, Estimation of small failure probabilities in high dimensions by subset simulation, Probabilistic Engineering Mechanics, vol.16, issue.4, pp.263-277, 2001.
DOI : 10.1016/S0266-8920(01)00019-4

S. K. Au and J. L. Beck, A new adaptive importance sampling scheme for reliability calculations, Structural Safety, vol.21, issue.2, pp.135-158, 1999.
DOI : 10.1016/S0167-4730(99)00014-4

S. K. Au and J. L. Beck, Subset Simulation and its Application to Seismic Risk Based on Dynamic Analysis, Journal of Engineering Mechanics, vol.129, issue.8, p.901, 2003.
DOI : 10.1061/(ASCE)0733-9399(2003)129:8(901)

Y. Auffray, P. Barbillon, and J. M. Marin, Estimation of rare events probabilities in computer experiments Arxiv preprint, pp.89-90, 2011.

A. Basudhar and S. Missoum, Adaptive explicit decision functions for probabilistic design and optimization using support vector machines, Computers & Structures, vol.86, issue.19-20, pp.1904-1917, 2008.
DOI : 10.1016/j.compstruc.2008.02.008

J. Lin and . Tu, A framework for validation of computer models, Technometrics, vol.49, issue.2, pp.138-154, 2007.

J. Bect, D. Ginsbourger, L. Li, V. Picheny, and E. Vazquez, Sequential design of computer experiments for the estimation of a probability of failure, Statistics and Computing, vol.34, issue.4, pp.1-21, 2010.
DOI : 10.1007/s11222-011-9241-4

URL : https://hal.archives-ouvertes.fr/hal-00689580

R. Benassi, J. Bect, and E. Vazquez, Robust gaussian process-based global optimization using a fully bayesian expected improvement criterion. Learning and Intelligent Optimization, pp.176-190, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00607816

R. Benassi, J. Bect, and E. Vazquez, Bayesian Optimization Using Sequential Monte Carlo, 6th International Conference on Learning and Intelligent Optimization (LION6), p.2012
DOI : 10.1007/978-3-642-34413-8_24

URL : https://hal.archives-ouvertes.fr/hal-00717195

D. A. Berry and B. Fristedt, Bandit problems: sequential allocation of experiments
DOI : 10.1007/978-94-015-3711-7

B. J. Bichon, M. S. Eldred, L. P. Swiler, S. Mahadevan, and J. M. Mcfarland, Efficient Global Reliability Analysis for Nonlinear Implicit Performance Functions, AIAA Journal, vol.46, issue.10
DOI : 10.2514/1.34321

P. Bjerager, On computational methods for structural reliability analysis. Structural Safety, pp.76-96, 1990.

G. Blatman, Adaptive sparse polynomial chaos expansions for uncertainty propogation and sensitivity analysis, 2009.

M. Bolic, P. M. Djuri?, and S. Hong, New resampling algorithms for particle filters, 2003 IEEE International Conference on Acoustics, Speech, and Signal Processing, 2003. Proceedings. (ICASSP '03)., pp.589-592, 2003.
DOI : 10.1109/ICASSP.2003.1202435

A. Borri and E. Speranzini, Structural reliability analysis using a standard deterministic finite element code, Structural Safety, vol.19, issue.4, pp.361-382, 1997.
DOI : 10.1016/S0167-4730(97)00017-9

Z. I. Botev and D. P. Kroese, Efficient Monte Carlo simulation via the generalized splitting method, Statistics and Computing, vol.68, issue.3, pp.1-16, 2011.
DOI : 10.1007/s11222-010-9201-4

J. Bourinet, Ferum 4.1 user's guide, 2010. URL http://www.ifma.fr

J. M. Bourinet, F. Deheeger, and M. Lemaire, Assessing small failure probabilities by combined subset simulation and support vector machines. Structural Safety, 2011.

K. Breitung, Asymptotic Approximations for Multinormal Integrals, Journal of Engineering Mechanics, vol.110, issue.3, p.357, 1984.
DOI : 10.1061/(ASCE)0733-9399(1984)110:3(357)

C. G. Bucher, Adaptive sampling ??? an iterative fast Monte Carlo procedure, Structural Safety, vol.5, issue.2, pp.119-126, 1988.
DOI : 10.1016/0167-4730(88)90020-3

C. G. Bucher and U. Bourgund, A fast and efficient response surface approach for structural reliability problems, Structural Safety, vol.7, issue.1, pp.57-66, 1990.
DOI : 10.1016/0167-4730(90)90012-E

F. Cérou, P. Del-moral, T. Furon, and A. Guyader, Sequential monte carlo for rare event estimation, Statistics and Computing, pp.1-14, 2011.

C. Chevalier, J. Bect, D. Ginsbourger, E. Vazquez, V. Picheny et al., Fast Parallel Kriging-Based Stepwise Uncertainty Reduction With Application to the Identification of an Excursion Set, Technometrics, vol.13, issue.4, pp.641108-641109, 2011.
DOI : 10.1007/3-540-50871-6

URL : https://hal.archives-ouvertes.fr/hal-00641108

J. P. Chilès and P. Delfiner, Geostatistics: Modeling Spatial Uncertainty, pp.38-52, 1999.
DOI : 10.1002/9781118136188

C. Currin, T. Mitchell, M. Morris, and D. Ylvisaker, Bayesian Prediction of Deterministic Functions, with Applications to the Design and Analysis of Computer Experiments, Journal of the American Statistical Association, vol.15, issue.416, pp.953-963, 1991.
DOI : 10.1093/biomet/64.2.309

J. P. De-gyvez and D. K. Pradhan, Integrated circuit manufacturability: the art of process and design integration, 1998.
DOI : 10.1109/9780470544921

F. Deheeger, Couplage mécano-fiabiliste : 2 SMART ? méthodologie d'apprentissage stochastique en fiabilité, pp.59-67, 2008.

F. Deheeger and M. Lemaire, Reliability analysis using support vector machine classification, Proceedings of the 3rd International ASRANet Colloquium, p.35, 2006.

F. Deheeger and M. Lemaire, Support vector machine for efficient subset simulations: 2 SMART method, 10th International Conference on Application of Statistics and Probability in Civil Engineering , Proceedings and Monographs in Engineering, Water and Earth Sciences, pp.259-260, 2007.

P. and D. Moral, Feynman-Kac formulae: genealogical and interacting particle systems with applications, 2004.

P. , D. Moral, A. Doucet, and A. Jasra, Sequential monte carlo samplers, Journal of the Royal Statistical Society: Series B (Statistical Methodology), vol.68, issue.3, pp.411-436, 2006.

O. Ditlevsen and P. Bjerager, Plastic Reliability Analysis By Directional Simulation, Journal of Engineering Mechanics, vol.115, issue.6, p.1347, 1989.
DOI : 10.1061/(ASCE)0733-9399(1989)115:6(1347)

O. Ditlevsen, P. Bjerager, R. Olesen, and A. M. Hasofer, Directional simulation in Gaussian processes, Probabilistic Engineering Mechanics, vol.3, issue.4, pp.207-217, 1988.
DOI : 10.1016/0266-8920(88)90013-6

R. Douc and O. Cappé, Comparison of resampling schemes for particle filtering, ISPA 2005. Proceedings of the 4th International Symposium on Image and Signal Processing and Analysis, 2005., pp.64-69, 2005.
DOI : 10.1109/ISPA.2005.195385

URL : https://hal.archives-ouvertes.fr/hal-00005883

R. Douc and É. Moulines, Limit theorems for weighted samples with applications to sequential monte carlo methods. The Annals of Statistics, pp.2344-2376, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00005896

V. Dubourg, Adaptive surrogate models for reliability analysis and reliability-based design optimization, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00697026

V. Dubourg, F. Deheeger, and B. Sudret, Metamodel-based importance sampling for the simulation of rare events, 11th International Conference on Applications of Statistics and Probability in Civil Engineering, pp.2011-89
DOI : 10.1201/b11332-100

URL : https://hal.archives-ouvertes.fr/hal-00587029

V. Dubourg, F. Deheeger, and B. Sudret, Metamodel-based importance sampling for structural reliability analysis. Preprint submitted to Probabilistic Engineering Mechanics, p.2011
DOI : 10.1016/j.probengmech.2013.02.002

URL : https://hal.archives-ouvertes.fr/hal-00590604

W. L. Dunn and J. K. Shultis, Exploring Monte Carlo Methods, 2011.

B. Echard, N. Gayton, and M. Lemaire, Kriging-based Monte Carlo simulation to compute the probability of failure efficiently: AK-MCS method, 6èmes Journées Nationales de Fiabilité, pp.24-26

B. Echard, N. Gayton, and M. Lemaire, Structural reliability assessment using kriging metamodel and active learning, IFIP WG 7.5 Working Conference on Reliability and Optimization of Structural Systems, pp.59-65, 2010.
DOI : 10.1201/b10497-9

K. El-tawil, M. Lemaire, and J. P. Muzeau, Reliability method to solve mechanical problems with implicit limit state. Rackwitz R, Thoft-Christensen P. Reliability and optimization of structural systems, pp.181-190, 1991.

L. Faravelli, Response???Surface Approach for Reliability Analysis, Journal of Engineering Mechanics, vol.115, issue.12, p.2763, 1989.
DOI : 10.1061/(ASCE)0733-9399(1989)115:12(2763)

P. Feldmann and S. W. Director, Integrated circuit quality optimization using surface integrals. Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on, vol.12, issue.12, pp.1868-1879, 1993.

F. Fleuret and D. Geman, Graded learning for object detection, Proceedings of the workshop on Statistical and Computational Theories of Vision of the IEEE International Conference on Computer Vision and Pattern Recognition (CVPR/SCTV), 1999.

P. I. Frazier, W. B. Powell, and S. Dayanik, A Knowledge-Gradient Policy for Sequential Information Collection, SIAM Journal on Control and Optimization, vol.47, issue.5, pp.2410-2439, 2008.
DOI : 10.1137/070693424

N. Gayton, J. M. Bourinet, and M. Lemaire, CQ2RS: a new statistical approach to the response surface method for reliability analysis, Structural Safety, vol.25, issue.1, pp.99-121, 2003.
DOI : 10.1016/S0167-4730(02)00045-0

D. Ginsbourger, Métamodèles multiples pour l'approximation et l'optimisation de fonctions numériques multivariables, p.47, 2009.

D. Ginsbourger, R. Le-riche, and L. Carraro, Kriging Is Well-Suited to Parallelize Optimization, Computational Intelligence in Expensive Optimization Problems of Adaptation Learning and Optimization, pp.131-162, 2010.
DOI : 10.1007/978-3-642-10701-6_6

URL : https://hal.archives-ouvertes.fr/emse-00436126

P. Glasserman, P. Heidelberger, P. Shahabuddin, and T. Zajic, Multilevel Splitting for Estimating Rare Event Probabilities, Operations Research, vol.47, issue.4, pp.585-600, 1999.
DOI : 10.1287/opre.47.4.585

R. B. Gramacy and S. L. Digabel, The mesh adaptive direct search algorithm with treed gaussian process surrogates, pp.2011-2048, 2011.

M. S. Handcock and M. L. Stein, A Bayesian Analysis of Kriging, Technometrics, vol.21, issue.3, pp.403-410, 1993.
DOI : 10.1080/00401706.1993.10485354

A. M. Hasofer and N. C. Lind, An exact and invariant first-order reliability format, p.15, 1973.

M. Hohenbichler, S. Gollwitzer, W. Kruse, and R. Rackwitz, New light on first- and second-order reliability methods, Structural Safety, vol.4, issue.4, pp.267-284, 1987.
DOI : 10.1016/0167-4730(87)90002-6

J. D. Hol, T. B. Schon, and F. Gustafsson, On Resampling Algorithms for Particle Filters, 2006 IEEE Nonlinear Statistical Signal Processing Workshop, pp.79-82, 2006.
DOI : 10.1109/NSSPW.2006.4378824

K. Hornik, R. The, and . Faq, URL http://CRAN.R-project.org/doc, 2010.

J. E. Hurtado, Structural reliability: statistical learning perspectives, 2004.
DOI : 10.1007/978-3-540-40987-8

J. E. Hurtado, An examination of methods for approximating implicit limit state functions from the viewpoint of statistical learning theory, Structural Safety, vol.26, issue.3, pp.271-293, 2004.
DOI : 10.1016/j.strusafe.2003.05.002

J. E. Hurtado, Filtered importance sampling with support vector margin: A powerful method for structural reliability analysis, Structural Safety, vol.29, issue.1, pp.2-15, 2007.
DOI : 10.1016/j.strusafe.2005.12.002

J. E. Hurtado and D. A. Alvarez, Reliability assessment of structural systems using neural networks, Proc. European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, 2000.

D. R. Jones, M. Schonlau, and J. William, Efficient global optimization of expensive black-box functions, Journal of Global Optimization, vol.13, issue.4, pp.455-492, 1998.
DOI : 10.1023/A:1008306431147

A. Karamchandani, P. Bjerager, and C. A. Cornell, Adaptive importance sampling, Structural Safety and Reliability, pp.855-862, 1989.

I. Kaymaz and C. A. Mcmahon, A response surface method based on weighted regression for structural reliability analysis, Probabilistic Engineering Mechanics, vol.20, issue.1, pp.11-17, 2005.
DOI : 10.1016/j.probengmech.2004.05.005

M. C. Kennedy and A. O. Hagan, Bayesian calibration of computer models, Journal of the Royal Statistical Society: Series B (Statistical Methodology), vol.63, issue.3, pp.425-464, 2001.
DOI : 10.1111/1467-9868.00294

R. P. Kennedy, C. A. Cornell, R. D. Campbell, S. Kaplan, and H. F. Perla, Probabilistic seismic safety study of an existing nuclear power plant, Nuclear Engineering and Design, vol.59, issue.2, pp.315-338, 1980.
DOI : 10.1016/0029-5493(80)90203-4

S. H. Kim and S. W. Na, Response surface method using vector projected sampling points, Structural Safety, vol.19, issue.1, pp.3-19, 1997.
DOI : 10.1016/S0167-4730(96)00037-9

G. S. Kimeldorf and G. Wahba, A Correspondence Between Bayesian Estimation on Stochastic Processes and Smoothing by Splines, The Annals of Mathematical Statistics, vol.41, issue.2, pp.495-502, 1970.
DOI : 10.1214/aoms/1177697089

T. Kloek and H. K. Van-dijk, Efficient estimation of income distribution parameters, Journal of Econometrics, vol.8, issue.1, pp.61-74, 1978.
DOI : 10.1016/0304-4076(78)90090-8

P. S. Koutsourelakis, Reliability of structures in high dimensions. Part II. Theoretical validation, Probabilistic Engineering Mechanics, vol.19, issue.4, pp.419-423, 2004.
DOI : 10.1016/j.probengmech.2004.05.002

P. S. Koutsourelakis, H. J. Pradlwarter, and G. I. Schuëller, Reliability of structures in high dimensions, part I: algorithms and applications, Probabilistic Engineering Mechanics, vol.19, issue.4, pp.409-417, 2004.
DOI : 10.1016/j.probengmech.2004.05.001

D. G. Krige, A statistical approach to some mine valuations and allied problems at the witwatersrand, 1951.

H. J. Kushner, A New Method of Locating the Maximum Point of an Arbitrary Multipeak Curve in the Presence of Noise, Journal of Basic Engineering, vol.86, issue.1, pp.97-106, 1964.
DOI : 10.1115/1.3653121

R. Lebrun and A. Dutfoy, A generalization of the Nataf transformation to distributions with elliptical copula, Probabilistic Engineering Mechanics, vol.24, issue.2, pp.172-178, 2009.
DOI : 10.1016/j.probengmech.2008.05.001

R. Lebrun and A. Dutfoy, Do rosenblatt and nataf isoprobabilistic transformations really differ? Probabilistic Engineering Mechanics, pp.577-584, 2009.
DOI : 10.1016/j.probengmech.2009.04.006

H. Li, Z. Lü, and Z. Yue, Support vector machine for structural reliability analysis, Applied Mathematics and Mechanics, vol.129, issue.8, pp.1295-1303, 2006.
DOI : 10.1007/s10483-006-1001-z

L. Li, J. Bect, and E. Vazquez, A numerical comparison of Kriging-based sequential strategies for estimating a probability of failure, 11th International Conference on Applications of Statistics and Probability Civil Engineering, 2011.
DOI : 10.1201/b11332-97

URL : https://hal.archives-ouvertes.fr/hal-00639430

D. J. Lizotte, R. Greiner, and D. Schuurmans, An experimental methodology for response surface optimization methods, Journal of Global Optimization, vol.4, issue.1, pp.1-38, 2011.
DOI : 10.1007/s10898-011-9732-z

J. L. Loeppky, J. Sacks, and W. J. Welch, Choosing the Sample Size of a Computer Experiment: A Practical Guide, Technometrics, vol.51, issue.4, pp.366-376, 2009.
DOI : 10.1198/TECH.2009.08040

M. P. Martinez, Modélisation des comportements extrêmes en ingénierie, 2008.

G. Matheron, Principles of geostatistics, Economic Geology, vol.58, issue.8, pp.1246-1266, 1963.
DOI : 10.2113/gsecongeo.58.8.1246

M. D. Mckay, R. J. Beckman, and W. J. Conover, A comparison of three methods for selecting values of input variables in the analysis of output from a computer code, Technometrics, pp.239-245, 1979.

R. E. Melchers, Search-based importance sampling Structural Safety, pp.117-128, 1990.

R. E. Melchers, Simulation in time-invariant and time-variant reliability problems. Reliability and Optimization of Structural Systems, pp.39-82, 1991.

R. E. Melchers, Structural system reliability assessment using directional simulation Structural Safety, pp.23-37, 1994.

J. Mockus, Bayesian Approach to Global Optimization Theory and Applications, pp.47-49, 1989.

J. Mockus, V. Tiesis, and A. Zilinskas, The application of Bayesian methods for seeking the extremum, Towards Global Optimization, pp.117-129, 1978.

A. Nataf, Dtermination des distribution dont les marges sont donnees Comptes rendus de l'academie des sciences, pp.42-43, 1962.

R. M. Neal, Slice sampling, The Annals of Statistics, vol.31, issue.3, pp.705-741, 2003.
DOI : 10.1214/aos/1056562461

J. Oakley, Estimating percentiles of uncertain computer code outputs, Journal of the Royal Statistical Society: Series C (Applied Statistics), vol.14, issue.1
DOI : 10.1111/1467-9884.00300

J. Oakley and A. O. Hagan, Bayesian inference for the uncertainty distribution of computer model outputs, Biometrika, vol.89, issue.4, 2002.
DOI : 10.1093/biomet/89.4.769

J. E. Oakley and A. O. Hagan, Probabilistic sensitivity analysis of complex models: a Bayesian approach, Journal of the Royal Statistical Society: Series B (Statistical Methodology), vol.34, issue.3, pp.751-769, 2004.
DOI : 10.1214/ss/1009213004

J. Ogrodzki and M. A. Styblinski, Optimal tolerancing, centering and yield optimization by one-dimensional orthogonal search (odos) technique, Proceeding of Europe Conference on Circuits Theory and Design, pp.480-485, 1980.

A. O. Hagan, Curve fitting and optimal design for prediction, Journal of the Royal Statistical Society. Series B (Methodological), vol.40, issue.1, pp.1-42, 1978.

A. Olsson, G. Sandberg, and D. Dahlblom, On Latin hypercube sampling for structural reliability analysis, Structural Safety, vol.25, issue.1, pp.47-68, 2003.
DOI : 10.1016/S0167-4730(02)00039-5

A. B. Owen, Monte Carlo Variance of Scrambled Net Quadrature, SIAM Journal on Numerical Analysis, vol.34, issue.5, p.1884, 1910.
DOI : 10.1137/S0036142994277468

M. Papadrakakis and N. D. Lagaros, Reliability-based structural optimization using neural networks and Monte Carlo simulation, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.32, pp.3491-3507, 2002.
DOI : 10.1016/S0045-7825(02)00287-6

E. Parzen, An Approach to Time Series Analysis, The Annals of Mathematical Statistics, vol.32, issue.4, pp.951-989, 1962.
DOI : 10.1214/aoms/1177704840

R. Paulo, Default priors for Gaussian processes, The Annals of Statistics, vol.33, issue.2, pp.556-582, 2005.
DOI : 10.1214/009053604000001264

V. Picheny and D. Ginsbourger, KrigInv : Kriging-based inversion for deterministic and noisy computer experiments, version 1.1, 2011. URL http://cran.r-project

V. Picheny, D. Ginsbourger, O. Roustant, R. T. Haftka, and N. Kim, Adaptive Designs of Experiments for Accurate Approximation of a Target Region, Journal of Mechanical Design, vol.132, issue.7, pp.53-57, 2010.
DOI : 10.1115/1.4001873

URL : https://hal.archives-ouvertes.fr/hal-00319385

M. Piera-martinez, Modélisation des comportements extrêmes en ingénierie, p.35, 2008.

M. Piera-martinez, E. Vazquez, E. Walter, and G. Fleury, Rkhs classification for multivariate extreme-value analysis, 7th IASC -Statistics for Data Mining, Learning and Knowledge Extraction, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00216153

H. J. Pradlwarter, G. I. Schuëller, P. S. Koutsourelakis, and D. C. Charmpis, Application of line sampling simulation method to reliability benchmark problems, Structural Safety, vol.29, issue.3, pp.208-221, 2007.
DOI : 10.1016/j.strusafe.2006.07.009

W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, Numerical Recipes in C. The Art of Scientific Computing (Second Edition), 1992.

R. Rackwitz and B. Flessler, Structural reliability under combined random load sequences, Computers & Structures, vol.9, issue.5, pp.489-494, 1978.
DOI : 10.1016/0045-7949(78)90046-9

M. R. Rajashekhar and B. R. Ellingwood, A new look at the response surface approach for reliability analysis, Structural Safety, vol.12, issue.3, pp.205-220, 1993.
DOI : 10.1016/0167-4730(93)90003-J

M. R. Rajashekhar and B. R. Ellingwood, A new look at the response surface approach for reliability analysis, Structural Safety, vol.12, issue.3, pp.205-220, 1993.
DOI : 10.1016/0167-4730(93)90003-J

P. Ranjan, D. Bingham, and G. Michailidis, Sequential Experiment Design for Contour Estimation From Complex Computer Codes, Technometrics, vol.50, issue.4, pp.527-541, 2008.
DOI : 10.1198/004017008000000541

M. Rosenblatt, Remarks on a multivariate transformation. The Annals of Mathematical Statistics, pp.470-472, 1952.

R. Y. Rubinstein and D. P. Kroese, The Cross-Entropy Method, p.46, 2004.

R. Y. Rubinstein and D. P. Kroese, Simulation and the Monte Carlo method, 2008.

J. Sacks, W. J. Welch, T. J. Mitchell, and H. P. Wynn, Design and Analysis of Computer Experiments, Statistical Science, vol.4, issue.4, pp.409-435, 1989.
DOI : 10.1214/ss/1177012413

E. M. Vestrup, The Theory of Measures and Integration, 2003.
DOI : 10.1002/9780470317112

J. Villemonteix, Optimisation de fonctions coûteuses, 2008.

J. Villemonteix, E. Vazquez, and E. Walter, An informational approach to the global optimization of expensive-to-evaluate functions, Journal of Global Optimization, vol.10, issue.5, pp.509-534, 2009.
DOI : 10.1007/s10898-008-9354-2

URL : https://hal.archives-ouvertes.fr/hal-00354262

P. H. Waarts, Structural reliability using finite element methods: an appraisal of DARS, 2000.

W. J. Welch, J. Buck, R. J. Sacks, H. P. Wynn, T. J. Mitchell et al., Screening, Predicting, and Computer Experiments, Technometrics, vol.34, issue.1, pp.15-25, 1992.
DOI : 10.2307/1269548

A. M. Yaglom, Correlation Theory of Stationary and Related Random Functions I: Basic Results. Springer Series in Statistics, 1986.

J. C. Zhang and M. A. Styblinski, Yield and variability optimization of integrated circuits, 1995.
DOI : 10.1007/978-1-4615-2225-6

Y. Zhang and Q. Liu, Reliability-based design of automobile components, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol.25, issue.5, pp.455-471, 2002.
DOI : 10.1243/09544070260137390

Y. Zheng and P. K. Das, Improved response surface method and its application to stiffened plate reliability analysis. Engineering structures, pp.544-551, 2000.