Y. M. Bar-cohen and . Lih, <title>Composite materials stiffness determination and defects characterization using enhanced leaky Lamb wave dispersion data acquisition method</title>, Nondestructive Evaluation of Aging Aircraft, Airports, and Aerospace Hardware III, pp.250-255, 1999.
DOI : 10.1117/12.339892

J. Berthelot, Matériaux composites -Comportement mécanique et analyse des structures, p.660

P. Patrick and D. Lucas, Structures composites en construction navale militaire

P. Patrick and D. Lucas, Matériaux composites en construction navale militaire

B. Anne and P. Krawczak, Liaison renfort/matrice -Définition et caractérisation

E. Aussedat-yahia, Comportement et endommagement du composite tissé carbone, 1997.

S. Abrate, Impact on composite structures Impacts sur matériaux composites : influence du projectile sur la réponse des matériaux, expériences/modélisation, 1991.

V. Martin-llorca, W. J. Cantwell, and J. Morton, Identification des mécanismes d'endommagement dans des plaques composites soumises à des impacts localisés de faible et moyenne énergie The impact resistance of composite materials --a review, ENSAM Composites, vol.12, issue.5, pp.22-347, 1991.

F. Chaillou, Etude des endommagements au choc de plaques composites, DGA, 1992.

N. F. Colaneri, K. Emi, and H. M. Kim, Shielding Effectiveness of Conductive Polymers): p. 47. 17. EuclidRTP3.21, EMS test results on composite panels and joints, 15. Shacklette, L., Pol. Pre. Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst. Applied Physics Letters, pp.291-297, 1992.

W. Jou, H. Cheng, and C. Hsu, The electromagnetic shielding effectiveness of carbon nanotubes polymer composites, Journal of Alloys and Compounds, vol.434, issue.435, pp.434-435, 2007.
DOI : 10.1016/j.jallcom.2006.08.203

D. D. Chung, Electromagnetic interference shielding effectiveness of carbon materials, Carbon, vol.39, issue.2, pp.279-285, 2001.
DOI : 10.1016/S0008-6223(00)00184-6

D. D. Chung and W. Graupner, Materials for electromagnetic interference shielding Conductive polymers: Evaluation of industrial applications, Journal of Materials Engineering and Performance Shirkawa, H., journal Chemical Society Synthetic Metals, vol.22, issue.571, pp.3623-3631, 1977.

A. F. Diaz, Handbook of conducting polymers, J. Chem. Soc, 1979.

C. Y. Lee, Contribution à l'étude d'un contrôle de santé associé à une protection électromagnétique pour matériaux composites 26 Electromagnetic interference shielding efficiency of polyaniline mixtures and multilayer films, Synthetic Metals, vol.102, pp.1-3, 1999.

S. K. Dhawan, N. Singh, and D. Rodrigues, Electromagnetic shielding behaviour of conducting polyaniline composites, Science and Technology of Advanced Materials, vol.41, issue.2, pp.105-113, 2003.
DOI : 10.1016/0379-6779(88)90334-7

J. L. Wojkiewicz, S. Fauveaux, and J. L. Miane, Electromagnetic shielding properties of polyaniline composites, Synthetic Metals, vol.135, issue.136, pp.135-136, 2003.
DOI : 10.1016/S0379-6779(02)00531-3

Y. Cao, P. Smith, A. J. Heeger, and M. , Counter-ion induced processibility of conducting polyaniline. Synthetic Metals Electromagnetic shielding of epoxy resin composites containing carbon fibers coated with polyaniline base, Physica A: Statistical and Theoretical Physics, vol.57, issue.1, pp.3514-3519, 1993.

N. N. Hoang and S. Rea, Réalisation et caractérisation de structure composite polyanilinepolyuréthane dans le domaine des micro-ondes Electromagnetic shielding properties of carbon fibre composites in avionic systems. Microwave review, à fibres optiquesà réseaux de Bragg, pp.735-736, 2005.

D. B. Guedra-degeorges, J. Petit-jean, J. Sagnier, and . Dupuis, Emerging health monitoring technologies: A route towards a flexible maintenance of aerospace structures. in Proceeding of conference on SHM, Ecole Normale Supérieure de Cachan Maintenance flexibility trough structural health monitoring : examples on EADS products Structural health monitoring, Proceeding of conference on SHM ISTE. 2006. 37. Rippert, L., M. Wevers, and S. Van Huffel, Optical and acoustic damage detection in laminated CFRP composite materials. Composites Science and Technology, pp.60-2713, 2000.

I. B. Kwon, C. G. Kim, and C. S. Hong, Simultaneous sensing of the strain and points of failure in composite beams with an embedded fiber optic Michelson sensor, Composites Science and Technology, vol.57, issue.12, pp.1639-1651, 1998.
DOI : 10.1016/S0266-3538(97)00101-2

Y. Okabe, Detection of transverse cracks in CFRP composites using embedded fiber Bragg grating sensors 41. FERRETTI, M., Capteurs à fibres optiques Technique de l'ingénieur R415-1. 42 Development of smart composite structures with smalldiameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing, Mowlem, and L. Dokos, Evaluating impact damage in CFRP using fibre optic sensors. Composites Science and Technology, pp.832-83815, 2000.

S. Yashiro, Monitoring damage in holed CFRP laminates using embedded chirped FBG sensors, International Journal of Solids and Structures, vol.44, issue.2, pp.603-613, 2007.
DOI : 10.1016/j.ijsolstr.2006.05.004
URL : http://doi.org/10.1016/j.ijsolstr.2006.05.004

M. Lemistre and J. C. Abry, Electromagnetic SHM system for GFRP and CFRP structures used in naval and aeronautic domains Cansmart, Canada. 46 In situ detection of damage in CFRP laminates by electrical resistance measurements, Composites Science and Technology, issue.6, pp.59-925, 1999.

D. D. Chung, Structural health monitoring by electrical resistance measurement, Smart Materials and Structures, vol.10, issue.4, pp.624-636, 2001.
DOI : 10.1088/0964-1726/10/4/305

P. E. Irving and C. Thiagarajan, Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique Damage detection in CFRP by electrical conductivity mapping, Smart Materials and Structures, pp.456-466, 1998.

D. Seo and J. Lee, Damage detection of CFRP laminates using electrical resistance measurement and neural network, Composite Structures, vol.47, issue.1-4, pp.1-4, 1999.
DOI : 10.1016/S0263-8223(00)00016-7

A. Todoroki and Y. Tanaka, Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method, Composites Science and Technology, vol.62, issue.5, pp.62-629, 2002.
DOI : 10.1016/S0266-3538(02)00013-1

J. C. Abry, In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements, Composites Science and Technology, vol.61, issue.6, pp.61-855, 2001.
DOI : 10.1016/S0266-3538(00)00181-0

M. Kupke, K. Schulte, and R. Schuler, Non-destructive testing of FRP by d.c. and a.c. electrical methods, Composites Science and Technology, vol.61, issue.6, pp.61-837, 2001.
DOI : 10.1016/S0266-3538(00)00180-9

A. L. Todoroki, The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance On waves propagating along the plane of an elestic solid, Proc. London Math. Soc., 1885. 17: p. 4-11. 56. lamb, H., On waves in an elastic plate Proc. R. Soc. London A, pp.61-144, 1917.

I. A. Viktorov, K. F. Graff, and J. L. Rose, Wave propagation in Elastic Solids Wave motion in Elastic Solids Ultrasonic waves in solid media 61. E. Dieulesaint and D. Royer, Ondes élastiques dans les solides-Tome 1: Propagation libre et guidée Piezoelectric based in situ damage detection of composite materials for SHM systems: British gas Subsonic lamb waves in anisotropic layers Wave propagation in layered anisotropic media with appications to composite, Massachusetts Institute of Technology. 63. Harker, A.H., Elastic waves in solids 66. Wang, L. and S.I. Rokhlin, Stable reformulation of transfer matrix method for wave propagation in layered anisotropic media, pp.291-299, 1967.

S. Grondel, The propagation of Lamb waves in multilayered plates: phase-velocity measurement, Measurement Science and Technology, vol.10, issue.5, pp.348-353, 1999.
DOI : 10.1088/0957-0233/10/5/002

P. Wilcox, M. Lowe, and P. Cawley, The effect of dispersion on long-range inspection using ultrasonic guided waves, NDT & E International, vol.34, issue.1, pp.1-9, 2001.
DOI : 10.1016/S0963-8695(00)00024-4

T. Monnier, The piezoelectric implant method: implementation and practical applications, Smart Materials and Structures, pp.267-272, 2000.
DOI : 10.1088/0964-1726/9/3/303
URL : https://hal.archives-ouvertes.fr/hal-00743166

Z. Su, L. Ye, and Y. Lu, Guided Lamb waves for identification of damage in composite structures: A review, Journal of Sound and Vibration, vol.295, issue.3-5, pp.3-5, 2006.
DOI : 10.1016/j.jsv.2006.01.020

F. Bernd, H. Dieter, and S. Franck, Monitoring Network for SHM in avionic applications. ECNDT -Th1, 2006.

K. S. Tan, Experimental evaluation of delaminations in composite plates by the use of Lamb waves, Composites Science and Technology, vol.53, issue.1, pp.77-84, 1995.
DOI : 10.1016/0266-3538(94)00076-X

K. Diamanti, C. Soutis, and J. M. Hodgkinson, Lamb waves for the non-destructive inspection of monolithic and sandwich composite beams, Composites Part A: Applied Science and Manufacturing, vol.36, issue.2, pp.189-195, 2005.
DOI : 10.1016/S1359-835X(04)00162-9

Z. Su, Assessment of delamination in composite beams using shear horizontal (SH) wave mode, Composites Science and Technology, vol.67, issue.2, pp.244-251, 2007.
DOI : 10.1016/j.compscitech.2006.08.019

S. Grondel, Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques, NDT & E International, vol.35, issue.3, pp.137-146, 2002.
DOI : 10.1016/S0963-8695(01)00027-5

C. F. Bois, détection de la corrosion de l'aluminium aéronautique par ondes de Lamb. ONERA/DMSE/MECS. 78. Osmont, D. Health monitoring of sandwich plates based on the analysis of the interaction of Lamb waves with damages, Proceedings of conference on SHM. 2002. Ecole normale supérieure de cachan. 79. Guy, P. p 352. in Proceeding of conference on SHM. 2002. Ecole Normale Supérieure de Cachan, France. 80. Su, Z., L. Ye, and X. Bu, A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers. Composite Structures, pp.1-4, 2002.

M. Lemistre, Damage localization in composite plates using wavelet transform processing on Lamb wave signals. in 2nd International workshop on structural health monitoring Wave transducer arrays for the inspection of large areas of thick plates. Review of progress in quantitative nondestructive evaluation, p.1049, 1999.

D. Valde-'s, K. Diamanti, C. Soutis, and J. M. Hodgkinson, Structural integrity monitoring of CFRP laminates using piezoelectric devices Imperial college Piezoelectric transducer arrangement for the inspection of large composite structures, Department of Aeronautics, pp.1121-1130, 2000.

B. A. Auld, Rayleigh and Lamb waves Lamb waves as thickness vibrations superimposed on a membrane carrier wave, Achenbach, J.D. J. Acoust. Soc.Am, vol.86, issue.5103, pp.121-2283, 1973.

J. D. Achenbach and Y. Xu, Use of elastodynamic reciprocity to analyse point-load generated axisymmetric waves in plate, wave Motion, issue.30, pp.57-67, 1999.

T. Hayashi and S. Endoh, calculation and vizualization of Lamb wave motion, Ultrasonics, issue.38, pp.770-773, 2000.

E. Moreno, P. Acevedo, and M. Castillo, pulse propagation in plate elements European journal of mechanics A/Solids Free wave propagation in plates of general anisotropic media, Journal of applied Mechanics, issue.22 56, pp.283-294, 1989.

Y. Liand and R. B. Thomson, Influence of anisotropy on the dispersion characteristics of guided ultrasonic plates mode, J. Acoust. Soc.Am, vol.87, issue.5, pp.1911-1931, 1990.

M. J. Lowe, Matrix techniques for modeling ultrasonic waves in multilayered media, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.42, issue.4, pp.525-542, 1995.
DOI : 10.1109/58.393096

S. G. Pierce, Broadband Lamb wave measurements in aluminium and carbon:glass fibre reinforced composite materials using non contacting laser generation and detection, Ultrasonics, vol.58, pp.105-114, 1997.

T. Liu, M. Veidt, and S. Kitipornchai, Contribution à l'étude d'un contrôle de santé associé à une protection électromagnétique pour matériaux composites 94 Single mode Lamb waves in composite laminated plates generated by piezoelectric transducers, Composite Structures, issue.3, pp.58-381, 2002.

E. J. Moulin, Piezoelectric transducer embedded in a composite plate: application to Lamb wave generation Nondestructive damage detection and interfacial evaluation of single-fibers/epoxy composites using PZT, PVDF and P(VDF-TrFE) copolymer sensors, Journal of Acoustical Society of America Composites Science and Technology, vol.82, issue.2, pp.65-241, 1997.

P. Blanquet, M. Lin, and F. Chang, Etude de l'endommagement des matériaux composites aéronautiques à partir des techniques ultrasonores Université de Valenciennes et du Hainaut Cambrésis. 98 The manufacture of composite structures with a built-in network of piezoceramics, Composites Science and Technology, vol.62, issue.78, pp.919-939, 1997.

C. Boller, Designs principles and inspection techniques for long life endurance of aircraft structures, 3rd Int. Workshop on structural health Monitoring, 2001.

V. S. Ahn, J. G. Harris, and J. D. Achenbach, Numerical analysis of the acoustic signature of a surface breaking carack, IEEE Transactions on Ultrasonics, vol.39, issue.1, pp.112-118, 1992.

P. P. Delsanto, T. Chaskelis, H. H. Mignogna, and R. B. , Connection machine simulation of ultrasonic wave propagation in materials. I: the one-dimensional case, Wave Motion, vol.16, issue.1, pp.65-80, 1992.
DOI : 10.1016/0165-2125(92)90047-6

P. P. Delsanto, R. S. Chaskelis, H. H. Mignogna, R. B. Kline, and R. , Connection machine simulation of ultrasonic wave propagation in materials. II : The twodimensional case. wave Motion, pp.295-314, 1994.

P. P. Delsanto, R. S. Mignogna, and R. B. , Connection machine simulation of ultrasonic wave propagation in materials III: The three-dimensional case, Wave Motion, vol.26, issue.4, pp.329-339, 1997.
DOI : 10.1016/S0165-2125(97)00013-9

P. Fromme, Defect detection in plates using guided waves., in Swiss Federal Institute of technology, 2001.

P. S. Fromme and M. B. , Detection of cracks at rivet holes using guided waves, Ultrasonics, vol.40, issue.1-8, pp.199-203, 2002.
DOI : 10.1016/S0041-624X(02)00137-3

D. N. Alleyne and P. Cawley, A 2-dimensional Fourier transform method for the quantitative measurement of Lamb modes, IEEE Symposium on Ultrasonics, pp.1143-1146, 1990.
DOI : 10.1109/ULTSYM.1990.171541

D. N. Alleyne and P. Cawley, The measurements and prediction of Lamb wave interaction with defects, IEEE 1991 Ultrasonics Symposium, pp.855-857, 1991.
DOI : 10.1109/ULTSYM.1991.234071

D. N. Alleyne and P. Cawley, The interaction of Lamb waves with defects, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.39, issue.3, pp.381-397, 1992.
DOI : 10.1109/58.143172

N. Guo and P. Cawley, The interaction of Lamb waves with delaminations in composite laminates, The Journal of the Acoustical Society of America, vol.94, issue.4, pp.2240-2246, 1993.
DOI : 10.1121/1.407495

M. J. Lowe, R. E. Challis, and C. W. Chan, The transmission of Lamb waves across adhesively bonded lap joints, The Journal of the Acoustical Society of America, vol.107, issue.3, pp.1333-1345, 2000.
DOI : 10.1121/1.428420

M. J. Lowe, Prediction and measurement of the reflection of the fundamental anti-symetric Lamb wave from cracks and notches. Review of progress in quantitative nondestructive evaluation, pp.193-200, 1999.

M. J. Lowe and O. Diligent, Low-frequency reflection characteristics of the s0 Lamb wave from a rectangular notch in a plate, The Journal of the Acoustical Society of America, vol.111, issue.1, pp.64-74, 2002.
DOI : 10.1121/1.1424866

D. Placko and T. Kundu, DPSM for modeling Engineering Problems, 2007.
DOI : 10.1002/9780470142400

M. Ney, Base de l'électromagnétisme

B. A. Auld, Acoustic fields and waves in solids, Wiley Interscience publication, p.423, 1973.

E. Dieulesaint and D. Royer, Ondes élastiques dans les solides

S. Mallat, A Wavelet Tour of Signal Processing, 1997.

F. Truchetet, Ondelettes pour le signal numérique, 1998.

M. Lemistre and D. Balageas, Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing, Smart Materials and Structures, vol.10, issue.3, pp.504-511, 2001.
DOI : 10.1088/0964-1726/10/3/312

M. Lemistre and D. J. , Corrosion and cracks detection in metallic structures by magneto optic image processing

D. Donoho, I. Johnstone, and I. C. , Académie des Sciences, 1994.

Z. Y. Zhang and M. O. Richardson, Low velocity impact induced damage evaluation and its effect on, pp.195-201, 2007.

V. Gobin, The surface impedance: a pertinent parameter to describe finite conductivity materials in numerical codes. in EMC syposium, 1991.

F. Isaac and V. Gobin, Méthode de mesure de l'impédance de surface de matériaux composites conducteurs, 1992.

V. Gobin, Diffraction par des ouvertures et par des objets tridimentionnels Apllication à la mesure des impédances de surface des matériaux bons conducteurs, 1989.

C. R. Paul, Introduction to Electromagnetic compatibility, 1992.
DOI : 10.1002/0471758159

B. J. Frank, H. B. Leferink, C. Wim, and . Van-etten, Shielding Effectiveness Measurements using a Reverberation Chamber, 17th International Zurich Symposium on Electromagnetic Compatibility, 2006.

H. Uberall, B. F. Howell, and E. L. Diamond, Effective medium theory and the attenuation of graphite fiber composites, Journal of Applied Physics, vol.73, issue.7, pp.73-3441, 1993.
DOI : 10.1063/1.352946

A. J. Stoyanov, Effective-medium model dependence of the radar reflectivity of conducting particle films, Journal of Applied Physics, vol.86, issue.6, pp.3310-3119, 1999.
DOI : 10.1063/1.371175

W. J. Staszewski and T. Gr, Application of the wavelet transform to fault detection in a spur gear, Mechanical Systems and Signal Processing, pp.289-307, 1997.
DOI : 10.1006/mssp.1994.1022

Z. Hou, M. Noori, and R. Amand, Wavelet-Based Approach for Structural Damage Detection, Journal of Engineering Mechanics, vol.126, issue.7, pp.677-683, 2000.
DOI : 10.1061/(ASCE)0733-9399(2000)126:7(677)

H. Sohn, Wavelet based active sensing for delamination detection in composite structure. Smart materials and structures, pp.123-160, 2003.

S. Park, C. Yun, and Y. Roh, Damage diagnostics on a welded zone of a steel truss member using an active sensing network system, NDT & E International, vol.40, issue.1, pp.71-76, 2007.
DOI : 10.1016/j.ndteint.2006.07.004

X. Zhao, Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring, Smart Materials and Structures, vol.16, issue.4, pp.1208-1217, 2007.
DOI : 10.1088/0964-1726/16/4/032

J. B. Han, Mode analysis of laser generated transient ultrasonic Lamb waveforms in composite plate by wavelet transform, Meterial evaluation, pp.837-840, 1999.

X. Zhao, Active health monitoring of an aircraft wing with an embedded piezoelectric sensor/actuator network: II. Wireless approaches. Smart Materials and Structures, pp.1218-1225, 2007.

R. Matsuzaki, M. Melnykowycz, and A. Todoroki, Antenna/sensor multifunctional composites for the wireless detection of damage, Composites Science and Technology, vol.69, issue.15-16, 2009.
DOI : 10.1016/j.compscitech.2009.07.002