]. W. Bibliographie1 and . Bergwerk, Flow pattern in diesel nozzle spray holes Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196, pp.173655-660, 1959.

M. Birouk and N. Lekic, LIQUID JET BREAKUP IN QUIESCENT ATMOSPHERE: A REVIEW, Atomization and Sprays, vol.19, issue.6, pp.501-528, 2009.
DOI : 10.1615/AtomizSpr.v19.i6.20

S. Leroux and M. Ledoux, Stabilité d'un jet liquide cylindrique. Influence de fortes pressions ambiantes, 1996.

J. W. Lord-rayleigh, On The Instability Of Jets, Proceedings of the London mathematical society, p.1878
DOI : 10.1112/plms/s1-10.1.4

A. Liepertz, Spray and atomization, Clean I.C. Engines and Fuels, 2005.

H. Hiroyasu, Spray breakup mechanism from the hole-type nozzle and its applications. Atomization and Sprays, pp.511-527, 2000.

N. Tamaki, M. Shimizu, and H. Hiroyasu, ENHANCEMENT OF THE ATOMIZATION OF A LIQUID JET BY CAVITATION IN A NOZZLE HOLE, Atomization and Sprays, vol.11, issue.2, pp.125-137, 2001.
DOI : 10.1615/AtomizSpr.v11.i2.20

C. Dumouchel, On the experimental investigation on primary atomization of liquid streams, Experiments in Fluids, vol.2001, issue.3, pp.371-422, 2008.
DOI : 10.1007/s00348-008-0526-0

C. Baumgarten, Mixture formation in internal combustion engines, 2006.

S. Martynov, D. Mason, M. Heikal, S. Sazhin, and M. Gorokhovski, MODELLING OF CAVITATION FLOW IN A NOZZLE AND ITS EFFECT ON SPRAY DEVELOPMENT, Jets, 2006.
DOI : 10.1615/IHTC13.p16.70

N. Tamaki, M. Shimizu, K. Nishida, and H. Hiroyasu, EFFECTS OF CAVITATION AND INTERNAL FLOW ON ATOMIZATION OF A LIQUID JET, Atomization and Sprays, vol.8, issue.2, pp.179-197, 1998.
DOI : 10.1615/AtomizSpr.v8.i2.30

H. Hiroyasu, Break-up length of a liquid jet and internal flow in a nozzle, ICLASS-91, pp.275-282, 1991.

Z. Liu and R. D. Reitz, An analysis of the distortion and breakup mechanisms of high speed liquid drops, International Journal of Multiphase Flow, vol.23, issue.4, pp.631-650, 1997.
DOI : 10.1016/S0301-9322(96)00086-9

T. Inamura, H. Yanaoka, and T. Kawada, VISUALIZATION OF AIRFLOW AROUND A SINGLE DROPLET DEFORMED IN AN AIRSTREAM, Atomization and Sprays, vol.19, issue.7, p.667, 2010.
DOI : 10.1615/AtomizSpr.v19.i7.50

S. S. Hwang, Z. Liu, and R. D. Reitz, Breakup mechanisms and drag coefficients of high-speed vaporizing liquid drops, Atomization and Sprays, vol.6, issue.3, pp.353-376, 1996.

C. E. Brennen, Cavitation and bubble dynamics, 1995.
DOI : 10.1017/CBO9781107338760

D. D. Joseph, Cavitation and the state of stress in a flowing liquid, Journal of Fluid Mechanics, vol.366, pp.367-378, 1998.
DOI : 10.1017/S0022112098001530

P. A. Kottke, S. S. Bair, and W. O. Winer, Cavitation in creeping shear flows, AIChE Journal, vol.18, issue.8, pp.2150-2170, 2005.
DOI : 10.1002/aic.10480

S. Dabiri, W. A. Sirignano, and D. D. Joseph, Cavitation in an orifice flow, Physics of Fluids, vol.19, issue.7, p.72112, 2007.
DOI : 10.1063/1.2750655

N. Dumont, Modélisation de l'écoulement diphasique dans les injecteurs Diesel, 2004.

H. Chaves, Particle image velocimetry measurements of the cavitating flow in a real size transparent VCO nozzle, 2008.

A. Andriotis, M. Gavaises, and C. Arcoumanis, Vortex flow and cavitation in diesel injector nozzles, Journal of Fluid Mechanics, vol.111, issue.3, pp.195-215, 2008.
DOI : 10.1063/1.870344

D. P. Schmidt, C. J. Rutland, M. L. Corradini, P. Roosen, and O. Genge, Cavitation in Two-Dimensional Asymmetric Nozzles, SAE Technical Paper Series, 1999.
DOI : 10.4271/1999-01-0518

C. Soteriou, R. Andrews, and M. Smith, Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization, SAE Technical Paper Series, 1995.
DOI : 10.4271/950080

J. M. Desantes, R. Payri, F. J. Salvador, J. De, and M. , Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions, Fuel, vol.89, issue.10, pp.893033-3041, 2010.
DOI : 10.1016/j.fuel.2010.06.004

A. Sou, S. Hosokawa, and A. Tomiyama, Effects of cavitation in a nozzle on liquid jet atomization, International Journal of Heat and Mass Transfer, vol.50, issue.17-18, pp.3575-3582, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2006.12.033

F. Ruiz, A few useful relations for cavitating orifices. ICLASS-91, S, pp.595-602, 1991.

L. M. Rodriguez-anton, J. Casanova-kindelan, and G. Tardajos, High Pressure Physical Properties of Fluids used in Diesel Injection Systems, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-2046

R. H. Spikes and G. A. Pennington, Discharge coefficient of small submerged orifices. Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196, pp.173661-674, 1959.

I. Baz, J. C. Champoussin, M. Lance, and J. L. Marié, Investigation of the Cavitation in High Pressure Diesel Injection Nozzles, Volume 1: Fora, Parts A and B, 2002.
DOI : 10.1115/FEDSM2002-31015

R. Saliba, Investigations expérimentales sur les phénomènes de cavitation et d'atomisation dans les injecteurs diesel, 2006.

U. Martin, R. Miranda, H. Chaves, and F. Obermeier, Cavitation in a transparent real size vco injection nozzle, ICLASS, 2003.

G. W. Hall, Analytical determination of the discharge characteristics of cylindrical???tube orifices, ARCHIVE: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23), vol.5, issue.1, pp.91-97, 1963.
DOI : 10.1243/JMES_JOUR_1963_005_013_02

W. H. Nurick, Orifice Cavitation and Its Effect on Spray Mixing, Journal of Fluids Engineering, vol.98, issue.4, pp.681-687, 1976.
DOI : 10.1115/1.3448452

V. Macian, R. Payri, X. Margot, and F. J. Salvador, A CFD ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE GEOMETRY ON THE INCEPTION OF CAVITATION, Atomization and Sprays, vol.13, issue.5-6, pp.579-604, 2003.
DOI : 10.1615/AtomizSpr.v13.i56.80

A. Sou, M. I. Maulana, K. Isozaki, S. Hosokawa, and A. Tomiyama, Effects of Nozzle Geometry on Cavitation in Nozzles of Pressure Atomizers, Journal of Fluid Science and Technology, vol.3, issue.5, pp.622-632, 2008.
DOI : 10.1299/jfst.3.622

A. Sou, S. Hosokawa, and A. Tomiyama, Dimensionless numbers on cavitation in a nozzle of pressure atomizers, ICLASS, 2009.

T. Funada, J. Wang, and D. D. Joseph, VISCOUS POTENTIAL FLOW ANALYSIS OF STRESS-INDUCED CAVITATION IN AN APERTURE FLOW, Atomization and Sprays, vol.16, issue.7, pp.763-776, 2006.
DOI : 10.1615/AtomizSpr.v16.i7.40

P. Roosen, Investigation of the transient behaviour of cavitation effects in liquid injection nozzles. Transient phenomena in multiphase and multicomponent systems : research report, pp.72-83, 2000.

E. Winklhofer, E. Kull, E. Kelz, A. Morozov, and S. Zurich, Comprehensive hydraulic and flow field documentation in model throttle experiments under cavitation conditions, ILASS-Europe Annual Meeting, pp.574-579, 2001.

J. P. Franc and J. M. Michel, Attached cavitation and the boundary layer: experimental investigation and numerical treatment, Journal of Fluid Mechanics, vol.95, issue.-1, pp.63-90, 1985.
DOI : 10.1017/S0022112070001672
URL : https://hal.archives-ouvertes.fr/hal-01133787

H. K. Suh, S. H. Park, and C. S. Lee, Experimental investigation of nozzle cavitating flow characteristics for diesel and biodiesel fuels, International Journal of Automotive Technology, vol.7, issue.3, pp.217-224, 2008.
DOI : 10.1007/s12239-008-0028-3

N. Takenaka, T. Kadowaki, Y. Kawabata, I. C. Lim, and D. M. Sim, Visualization of cavitation phenomena in a diesel engine fuel injection nozzle by neutron radiography. Nuclear instruments and methods in physics research, pp.129-133, 2005.

E. Winklhofer, E. Kelz, and A. Morozov, Basic flow processes in high pressure fuel injection equipment, ICLASS, 2003.

R. Payri, J. Salvador, J. Gimeno, and M. De, Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber, International Journal of Heat and Fluid Flow, vol.30, issue.4, pp.768-777, 2009.
DOI : 10.1016/j.ijheatfluidflow.2009.03.011

R. F. Miranda, P. Wu, and G. M. Faeth, Effects of initial flow conditions on primary breakup of nonturbulent and turbulent round liquid jets, Atomization and Sprays, vol.5, issue.2, pp.175-196, 1995.

L. He and F. Ruiz, EFFECT OF CAVITATION ON FLOW AND TURBULENCE IN PLAIN ORIFICES FOR HIGH-SPEED ATOMIZATION, Atomization and Sprays, vol.5, issue.6, pp.569-584, 1995.
DOI : 10.1615/AtomizSpr.v5.i6.30

F. Payri, V. Bermudez, R. Payri, and F. J. Salvador, The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles, Fuel, vol.83, issue.4-5, pp.419-431, 2004.
DOI : 10.1016/j.fuel.2003.09.010

L. C. Ganippa, G. Bark, S. Andetersson, and J. Chomiak, Cavitation: a contributory factor in the transition from symmetric to asymmetric jets in cross-flow nozzles, Experiments in Fluids, vol.36, issue.4, pp.627-634, 2004.
DOI : 10.1007/s00348-003-0736-4

C. Badock, R. Wirth, A. Fath, and A. Leipertz, Investigation of cavitation in real size diesel injection nozzles, International Journal of Heat and Fluid Flow, vol.20, issue.5, pp.538-544, 1999.
DOI : 10.1016/S0142-727X(99)00043-0

A. Sou, M. I. Maulana, S. Hosokawa, and A. Tomiyama, Ligament Formation Induced by Cavitation in a Cylindrical Nozzle, Journal of Fluid Science and Technology, vol.3, issue.5, pp.633-644, 2008.
DOI : 10.1299/jfst.3.633

C. Stanley, G. Rosengarten, B. Milton, and T. Barber, Investigation of cavitation in a large-scale transparent nozzle. FISITA, 2008.

H. Chaves, M. Knapp, A. Kubitzek, F. Obermeler, and T. Schneider, Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE Technical Paper Series, 1995.
DOI : 10.4271/950290

C. Arcoumanis, H. Flora, M. Gavaises, and M. Badami, Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-1249

V. Macian, V. Bermudez, R. Payri, and J. Gimeno, NEW TECHNIQUE FOR DETERMINATION OF INTERNAL GEOMETRY OF A DIESEL NOZZLE WITH THE USE OF SILICONE METHODOLOGY, Experimental Techniques, vol.2, issue.2, pp.39-43, 2003.
DOI : 10.1111/j.1747-1567.2003.tb00107.x

D. P. Schmidt, C. J. Rutland, and M. Corradini, A Numerical Study of Cavitating Flow Through Various Nozzle Shapes, SAE Technical Paper Series, pp.1664-1673, 1997.
DOI : 10.4271/971597

R. Payri, J. M. García, F. J. Salvador, and J. Gimeno, Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics, Fuel, vol.84, issue.5, pp.551-561, 2005.
DOI : 10.1016/j.fuel.2004.10.009

B. Stutz, Influence of Roughness on the Two-Phase Flow Structure of Sheet Cavitation, Journal of Fluids Engineering, vol.125, issue.4, pp.652-659, 2003.
DOI : 10.1115/1.1596240

J. C. Chang, S. B. Huang, and C. M. Lin, EFFECTS OF INLET SURFACE ROUGHNESS, TEXTURE, AND NOZZLE MATERIAL ON CAVITATION, Atomization and Sprays, vol.16, issue.3, pp.299-317, 2006.
DOI : 10.1615/AtomizSpr.v16.i3.40

R. Wirth, C. Badock, and C. Tropéa, The influence of hydro grinding on cavitation inside a diesel injection nozzle and primary break-up under unsteady pressure conditions, ILASS'99, 1999.

D. Jung, W. L. Wang, A. Knafl, T. J. Jacobs, S. J. Hu et al., Experimental investigation of abrasive flow machining effects on injector nozzle geometries, engine performance, and emissions in a di diesel engine, International Journal of Automotive Technology, vol.47, issue.1???2, pp.9-15, 2008.
DOI : 10.1007/s12239-008-0002-0

F. Echouchene, H. Belmabrouk, L. Le-penven, and M. Buffat, Numerical simulation of wall roughness effects in cavitating flow, International Journal of Heat and Fluid Flow, vol.32, issue.5, 2011.
DOI : 10.1016/j.ijheatfluidflow.2011.05.010
URL : https://hal.archives-ouvertes.fr/hal-00691042

A. K. Singhal, M. M. Athavale, H. Li, and Y. Jiang, Mathematical Basis and Validation of the Full Cavitation Model, Journal of Fluids Engineering, vol.124, issue.3, pp.617-624, 2002.
DOI : 10.1115/1.1486223

X. C. Wang, G. C. Lim, H. Y. Zheng, F. L. Ng, W. Liu et al., Femtosecond pulse laser ablation of sapphire in ambient air, Applied Surface Science, vol.228, issue.1-4, pp.221-226, 2004.
DOI : 10.1016/j.apsusc.2004.01.009

B. Wu, M. Zhou, J. Li, X. Ye, G. Li et al., Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laser, Applied Surface Science, vol.256, issue.1, pp.61-66, 2009.
DOI : 10.1016/j.apsusc.2009.07.061

V. Zorba, E. Straatakis, M. Barberoglou, E. Spanakis, P. Tzanetakis et al., Tailoring the wetting response of silicon surfaces via fs laser structuring, Applied Physics A, vol.14, issue.4, pp.819-825, 2008.
DOI : 10.1088/0957-4484/14/10/307

W. Barthlott and C. Neinhuis, Purity of the sacred lotus, or escape from contamination in biological surfaces, Planta, vol.202, issue.1, pp.1-8, 1997.
DOI : 10.1007/s004250050096

D. Bruneel, G. Matras, R. L. Harzic, N. Huot, K. König et al., Micromachining of metals with ultra-short Ti-Sapphire lasers: Prediction and optimization of the processing time, Optics and Lasers in Engineering, vol.48, issue.3, pp.268-271, 2010.
DOI : 10.1016/j.optlaseng.2009.10.010
URL : https://hal.archives-ouvertes.fr/ujm-00553644

J. P. Colombier, P. Combis, F. Bonneau, R. L. Harzic, and E. Audouard, Hydrodynamic simulations of metal ablation by femtosecond laser irradiation, Physical Review B, vol.71, issue.16, 2005.
DOI : 10.1103/PhysRevB.71.165406
URL : https://hal.archives-ouvertes.fr/hal-00121833

W. Wang, X. Mei, G. Jiang, S. Lei, and C. Yang, Effect of two typical focus positions on microstructure shape and morphology in femtosecond laser multi-pulse ablation of metals, Applied Surface Science, vol.255, issue.5, pp.2303-2311, 2008.
DOI : 10.1016/j.apsusc.2008.07.100

N. Sanner, N. Huota, E. Audouard, C. Larat, and J. Huignard, Direct ultrafast laser micro-structuring of materials using programmable beam shaping, Optics and Lasers in Engineering, vol.45, issue.6, pp.737-741, 2007.
DOI : 10.1016/j.optlaseng.2006.10.009
URL : https://hal.archives-ouvertes.fr/ujm-00136894

J. S. Yahng, J. R. Nam, and S. C. Jeoung, The influence of substrate temperature on femtosecond laser micro-processing of silicon, stainless steel and glass, Optics and Lasers in Engineering, vol.47, issue.7-8, pp.815-820, 2009.
DOI : 10.1016/j.optlaseng.2009.02.001

J. M. Liu, Simple technique for measurements of pulsed Gaussian-beam spot sizes, Optics Letters, vol.7, issue.5, pp.196-198, 1982.
DOI : 10.1364/OL.7.000196

W. Merzkirch, Flow visualization. Academic Pr, 1974.

H. Schlichting, K. Gersten, and K. Gersten, Boundary-layer theory, 2000.
DOI : 10.1007/978-3-662-52919-5

C. E. Brennen, Fundamentals of multiphase flow, 2005.
DOI : 10.1017/CBO9780511807169

C. Mishra and Y. Peles, Cavitation in flow through a micro-orifice inside a silicon microchannel, Physics of Fluids, vol.17, issue.1, p.13601, 2005.
DOI : 10.1063/1.1827602

Q. Tseng, E. Duchemin-pelletier, A. Deshiere, M. Balland, H. Guillou et al., Spatial organization of the extracellular matrix regulates cell-cell junction positioning, Proceedings of the National Academy of Sciences, pp.1506-1511, 2012.
DOI : 10.1073/pnas.1106377109
URL : https://hal.archives-ouvertes.fr/hal-00673247

B. Balenwski, B. Heine, and C. Tropea, Experimental investigation of the correlation between nozzle flow and spray using laser doppler velicimeter, phase doppler system, highspeed photography, and x-ray radiography, Atomization and Sprays, vol.20, issue.1, pp.57-70, 2010.

H. K. Suh and C. S. Lee, Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics, International Journal of Heat and Fluid Flow, vol.29, issue.4, pp.1001-1009, 2008.
DOI : 10.1016/j.ijheatfluidflow.2008.03.014

S. Song and J. Eaton, The effects of wall roughness on the separated flow over a smoothly contoured ramp, Experiments in Fluids, vol.33, issue.1, pp.38-46, 2002.
DOI : 10.1007/s00348-002-0411-1